geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: yasintahir on Tue, 07 February 2017, 08:37:21

Title: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 07 February 2017, 08:37:21
Extras PCB and plate available.
You can fill order here https://goo.gl/forms/AQMJtfjcdN7EKmc52

FCFS format
Specs :
- Fully programmable
- Underglow Led
- Controller use Atmega 32a
- Use L3 firmware like other leeku PCB
- Support universal 60% case
- 9  option bottom row
- 1.6mm pin hole size

Price :
- PCB $50
- PLATE  :
  + SS = $30
  + Brass = $35
- Shipping price $30 using EMS

Deadline 2 weeks or until 70pcs PCB Sold
Shipping by end of march.


More
Hi guys... After take 3 month on IC thread now it's time for Group buy!

This Group buy is for PCB and Plate only designed by Leeku
(http://i.imgur.com/x7CnBwz.jpg)

(http://i.imgur.com/KccrFhZ.jpg)

(http://i.imgur.com/NIUNFfs.jpg)

more image (plate 2d render and protoype) : http://imgur.com/a/l4BL3

Spec:
- Fully programmable
- Underglow Led
- Controller use Atmega 32a
- Use L3 firmware like other leeku PCB
- Support universal 60% case
- 9  option bottom row
- 1.6mm pin hole size


Price :
- PCB $55
- PLATE  :
  + ALU/SS = $30
  + Brass = $40

Shipping price $25 use EMS from korea

Deadline 28 february 2017 or extra time when not reached 40 MOQ at 28 feb
Current MOQ 39/40 HIT MOQ!!! YAS!

Schedule
- February taking order DONE
- 1-7 march invoicing DONE
- Production 2 month ORDER SUBMITTED
- Shipping to your home

If you interested with this one fill this form https://goo.gl/forms/hswV6btmq4HAPOll1

Don't forget to vote PCB color option and plate https://goo.gl/forms/VWoRxca2NuBCtyAB2

double check your order https://goo.gl/AiagHA

Thanks!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: dyoungc on Thu, 09 February 2017, 00:04:42
Finally reached GB status!
I just placed my order.

Is the maximum MOQ determined at 40 units? I might buy an extra PCB before the Feb 28 deadline, but I'm worried the GB might close early if there's a maximum MOQ.
Also, can I change to alternate domestic shipping? I will be in Seoul in June, so I'd like to save some money on shipping cost.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: gadzkun on Thu, 09 February 2017, 00:20:23
this is happening! ordered~ XD
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: darkslay3r on Thu, 09 February 2017, 00:25:11
ordered as well !! my dream board mini layout with arrow !!!!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 00:26:45
Finally reached GB status!
I just placed my order.

Is the maximum MOQ determined at 40 units? I might buy an extra PCB before the Feb 28 deadline, but I'm worried the GB might close early if there's a maximum MOQ.
Also, can I change to alternate domestic shipping? I will be in Seoul in June, so I'd like to save some money on shipping cost.

nope, if we get 40 moq before 28 february form still closed on 28 feb but if 28 feb we don't hit moq i will add extra time XD
sure i will add shipping invoice after production complete, so if production done on june i will tell my friend to ship domestic for you  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 00:27:22
ordered as well !! my dream board mini layout with arrow !!!!

this is happening! ordered~ XD

YAY!  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: dyoungc on Thu, 09 February 2017, 02:22:45
Finally reached GB status!
I just placed my order.

Is the maximum MOQ determined at 40 units? I might buy an extra PCB before the Feb 28 deadline, but I'm worried the GB might close early if there's a maximum MOQ.
Also, can I change to alternate domestic shipping? I will be in Seoul in June, so I'd like to save some money on shipping cost.

nope, if we get 40 moq before 28 february form still closed on 28 feb but if 28 feb we don't hit moq i will add extra time XD
sure i will add shipping invoice after production complete, so if production done on june i will tell my friend to ship domestic for you  ;)

Great Thanks to you friend for holding onto it. My caps will also arrive in June so I'll need to find a case for the split space layout.
Also, is there a color sample for the different PCB options? I'm wondering if the blue is dark shade or light mint blue like the GON PCB from mekanisk GB.

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Vadurr on Thu, 09 February 2017, 03:42:37
YASSSSSSSS! In this thangg!  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: jenggo on Thu, 09 February 2017, 03:47:40
YAS! i'm in
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Jumie on Thu, 09 February 2017, 03:56:09
Niiice... glws
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: stoic-lemon on Thu, 09 February 2017, 05:32:44
This is going to be fun. Anyone who wants proper split spacebars should head to this thread and say so. https://geekhack.org/index.php?topic=82737.100
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: mech0nly on Thu, 09 February 2017, 05:41:17
Hmmm interesting


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: pizza_is_a_lie on Thu, 09 February 2017, 07:09:00
Sorry, I'm quite out of the loop on this one. ALPS support? Compatible cases?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 07:14:12
YASSSSSSSS! In this thangg!  :thumb:

YAS! i'm in

Niiice... glws

Hmmm interesting


Sent from my iPhone using Tapatalk

Thanks guys  :thumb:

This is going to be fun. Anyone who wants proper split spacebars should head to this thread and say so. https://geekhack.org/index.php?topic=82737.100

nice info right there!  ;D

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 07:15:29
Sorry, I'm quite out of the loop on this one. ALPS support? Compatible cases?

No alps support, cause too many bottom option if we do mx/alps...
Cases will compatible with any universal 60% case
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: diiiP on Thu, 09 February 2017, 07:55:35
Hey,

(http://i.imgur.com/dwfc40o.jpg)
Looking at the plates, the middle option is not possible, right?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 08:46:00
Hey,

Show Image
(http://i.imgur.com/dwfc40o.jpg)

Looking at the plates, the middle option is not possible, right?


it is possible (http://i.imgur.com/FUuqa1b.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: afrokobe on Thu, 09 February 2017, 09:02:08
I want to order, but can you not put everyone's address on the google doc....
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 09:05:53
I want to order, but can you not put everyone's address on the google doc....

ups forget i already hide it with phone number and paypal address now  :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: afrokobe on Thu, 09 February 2017, 09:09:26
I want to order, but can you not put everyone's address on the google doc....

ups forget i already hide it with phone number and paypal address now  :)

erm its still there though lol just hidden, can you make it invite only for people that signed up?

edit: realized its protected for edit you're good!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: lunr on Thu, 09 February 2017, 13:32:07
Seems like everyone is going for brass plates. Is there anything special with brass or its just looks cool?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: gadzkun on Thu, 09 February 2017, 13:35:57
Hey,

Show Image
(http://i.imgur.com/dwfc40o.jpg)

Looking at the plates, the middle option is not possible, right?

yeah the middle option(1-1-1-arrow) is not possible, gotta say that middle option layout was the best,
i talk to the maker about it too but the hole screw is right there so its not possible sadly :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: child on Thu, 09 February 2017, 13:50:31
Forgive this question from a newbie - does universal plate support all layouts? If so, what is the point in ordering less flexible layouts?

I ordered a 3u plate, but now I'm considering changing to universal in case I want to try the other layouts later.

I love this flexibility in bottom row and spacebar options btw  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: JDragon on Thu, 09 February 2017, 13:51:25
Definitely in for one, just gotta figure out what layout to go with.

A few questions for plate:

1. Will we be able to get the plate anodized in the color of our choosing? (for aluminum)
2. Is the brass plate coated to prevent tarnishing?

Thanks!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Slash Emperor on Thu, 09 February 2017, 15:20:23
Just filled out my form. Might add to it, since this is a really cool project and it's fantastic to see so many layout options (and brass plates!).

A 60% PCB+Arrow cluster with split spacebar on brass plate just might be damn near endgame for me.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: JasonH on Thu, 09 February 2017, 16:36:59
Forgive this question from a newbie - does universal plate support all layouts? If so, what is the point in ordering less flexible layouts?

I ordered a 3u plate, but now I'm considering changing to universal in case I want to try the other layouts later.

I love this flexibility in bottom row and spacebar options btw  :thumb:

I ordered 6u, but sent a PM to change to universal. However looking at the pic that bottom row seems so thin for brass on the universal. Kind of worried about how easily that would bend. Might ask to have it changed back.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: child on Thu, 09 February 2017, 16:42:20
What is the difference between those materials we can choose for the plate in terms of "feel"? I only have experience with steel ones so far.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: stoic-lemon on Thu, 09 February 2017, 16:52:36
I think not ordering a universal plate makes for a more stable keyboard in the end. If you know you're not going to try a bunch of layouts, you may as well get a non-universal layout.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: dyoungc on Thu, 09 February 2017, 19:23:10
Are the PCB switch holes standard size to fit holtite sockets?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: JasonH on Thu, 09 February 2017, 19:54:35
Are the PCB switch holes standard size to fit holtite sockets?

Leeku PCBs typically are though you may need to solder some in, especially on the bottom row considering how many layouts the pcb supports
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 21:43:08
Seems like everyone is going for brass plates. Is there anything special with brass or its just looks cool?

It's more weight for brass
Hey,

Show Image
(http://i.imgur.com/dwfc40o.jpg)

Looking at the plates, the middle option is not possible, right?

yeah the middle option(1-1-1-arrow) is not possible, gotta say that middle option layout was the best,
i talk to the maker about it too but the hole screw is right there so its not possible sadly :p

sorry i'm not focus it's not possible as leeku said for hole screw, gadzkun already answer it thanks gadz :thumb:

Forgive this question from a newbie - does universal plate support all layouts? If so, what is the point in ordering less flexible layouts?

I ordered a 3u plate, but now I'm considering changing to universal in case I want to try the other layouts later.

I love this flexibility in bottom row and spacebar options btw  :thumb:

yes universal will cover all layout... and less plate is for stability

Definitely in for one, just gotta figure out what layout to go with.

A few questions for plate:

1. Will we be able to get the plate anodized in the color of our choosing? (for aluminum)
2. Is the brass plate coated to prevent tarnishing?

Thanks!

1. i want make it everyone can choose color plate since leeku said we dont have moq for plate, but he said just silver color who available for plate
2. i forgot about brass i will ask leeku again

EDIT : as leeku said plate finishing will be same as KIN's(TX) keyboard


Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 09 February 2017, 21:46:43
Just filled out my form. Might add to it, since this is a really cool project and it's fantastic to see so many layout options (and brass plates!).

A 60% PCB+Arrow cluster with split spacebar on brass plate just might be damn near endgame for me.

thanks!

What is the difference between those materials we can choose for the plate in terms of "feel"? I only have experience with steel ones so far.

I never type on this material before, but tommorow i have mechanical keyboard gathering here, maybe i can find someone bring board with brass plate so i will let you know

Are the PCB switch holes standard size to fit holtite sockets?

i never use hotlite before, but as leeku said it's 1.6mm pin hole size
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ideus on Thu, 09 February 2017, 22:33:52
Considering to go PCB mounted switches with no plate:

Is there any blocker available in this size? or maybe some form of custom made one could fill the empty corner thing?

If you want split space bar GMK made, you should check this coming soon GB (https://deskthority.net/group-buys-f50/hadapter-kit-round-ii-t14441-180.html) that includes a split space bar kit.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Fri, 10 February 2017, 00:01:01
Considering to go PCB mounted switches with no plate:

Is there any blocker available in this size? or maybe some form of custom made one could fill the empty corner thing?

If you want split space bar GMK made, you should check this coming soon GB (https://deskthority.net/group-buys-f50/hadapter-kit-round-ii-t14441-180.html) that includes a split space bar kit.

no blocker for 0.75u yet, SP just have 1u... but i think if we have more request we can make it at SP
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: afrokobe on Fri, 10 February 2017, 09:19:48
Considering to go PCB mounted switches with no plate:

Is there any blocker available in this size? or maybe some form of custom made one could fill the empty corner thing?

If you want split space bar GMK made, you should check this coming soon GB (https://deskthority.net/group-buys-f50/hadapter-kit-round-ii-t14441-180.html) that includes a split space bar kit.

no blocker for 0.75u yet, SP just have 1u... but i think if we have more request we can make it at SP

Anyway I can additional universal plate on my order?  or should I fill out new form
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ozan6661 on Fri, 10 February 2017, 09:29:09
Considering to go PCB mounted switches with no plate:

Is there any blocker available in this size? or maybe some form of custom made one could fill the empty corner thing?

If you want split space bar GMK made, you should check this coming soon GB (https://deskthority.net/group-buys-f50/hadapter-kit-round-ii-t14441-180.html) that includes a split space bar kit.

no blocker for 0.75u yet, SP just have 1u... but i think if we have more request we can make it at SP

Anyway I can additional universal plate on my order?  or should  fill out new form

just pm him he will edit the form
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Fri, 10 February 2017, 09:41:12
Anyway I can additional universal plate on my order?  or should I fill out new form

another brass plate? or other material?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: afrokobe on Fri, 10 February 2017, 18:18:26
Actually its fine, I changed my mind.   My original order is perfect! Sorry for being so indecisive haha
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: JDragon on Fri, 10 February 2017, 18:58:36
EDIT : as leeku said plate finishing will be same as KIN's(TX) keyboard

Does this mean the brass plate won't tarnish?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: eyedares on Fri, 10 February 2017, 20:27:37
Ordered!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: tuco on Fri, 10 February 2017, 20:53:20
I'm in.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Sat, 11 February 2017, 09:46:00
EDIT : as leeku said plate finishing will be same as KIN's(TX) keyboard

Does this mean the brass plate won't tarnish?

here's pict of brass plate on tx75 http://i.imgur.com/VmOq0y8.jpg leeku said will be same as that

Ordered!

I'm in.

Thanks 8 left to hit moq, i never expect it will go fast  :))
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: lakomail on Sat, 11 February 2017, 10:11:09
sent you a pm silentreader :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Sat, 11 February 2017, 10:13:49
sent you a pm silentreader :)

edited bro  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Dystopia on Sat, 11 February 2017, 11:22:28
Anyone knows where to get good non-rattly stabs for the 3u/split spacebar bottom row layout?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: slot demon on Sat, 11 February 2017, 12:04:54
Ordered
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Che.R.Ry on Sat, 11 February 2017, 13:05:56
Ordered
Can't wait for it! ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Sun, 12 February 2017, 09:30:39
Anyone knows where to get good non-rattly stabs for the 3u/split spacebar bottom row layout?

zeal stabs maybe ?  :-\

Ordered


Ordered
Can't wait for it! ;D

Thanks bro, here's i got 3d rendered of this board wanna be
(http://i.imgur.com/KccrFhZ.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: kolruds on Mon, 13 February 2017, 03:10:21
Ordered my first split spacebar layout!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Slash Emperor on Mon, 13 February 2017, 09:51:44
Good to see we've almost hit MOQ! I already have 2 PCB+plates on order, but I might bump it up and add another at this rate!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ktrezzi on Mon, 13 February 2017, 14:14:05
Looks like a real beauty!
What else do I need? Switchtes, stabs, (any) 60% case, keycaps?

Is it possible to build it with LED? (underglow or for each switch?) The plate supports ISO?

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ideus on Mon, 13 February 2017, 14:54:59
Looks like a real beauty!
What else do I need? Switchtes, stabs, (any) 60% case, keycaps?

Is it possible to build it with LED? (underglow or for each switch?) The plate supports ISO?

You will get a PCB and plate. You will require to source switches, key caps and a sixty case. I am not sure about LEDs. The kit supports an ISO layout.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ktrezzi on Mon, 13 February 2017, 15:09:51


Looks like a real beauty!
What else do I need? Switchtes, stabs, (any) 60% case, keycaps?

Is it possible to build it with LED? (underglow or for each switch?) The plate supports ISO?

You will get a PCB and plate. You will require to source switches, key caps and a sixty case. I am not sure about LEDs. The kit supports an ISO layout.

Alright, thank you!
So I could use my Pok3r case for example? Would be interesting to know if I the build supports LED? 

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ideus on Mon, 13 February 2017, 16:07:39


Looks like a real beauty!
What else do I need? Switchtes, stabs, (any) 60% case, keycaps?

Is it possible to build it with LED? (underglow or for each switch?) The plate supports ISO?

You will get a PCB and plate. You will require to source switches, key caps and a sixty case. I am not sure about LEDs. The kit supports an ISO layout.

Alright, thank you!
So I could use my Pok3r case for example? Would be interesting to know if I the build supports LED?

Yes, you can use a Pok3r case. The OP states that the PCB supports underglow leds. If they are SMD I suppose they come pre-soldered. Let the OP to confirm it. In-switch leds should be soldered along with the switches.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: pizza_is_a_lie on Mon, 13 February 2017, 16:38:16
Can anyone recommend a case for this to make the most of the underglow etc?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Mon, 13 February 2017, 16:51:38


Looks like a real beauty!
What else do I need? Switchtes, stabs, (any) 60% case, keycaps?

Is it possible to build it with LED? (underglow or for each switch?) The plate supports ISO?

You will get a PCB and plate. You will require to source switches, key caps and a sixty case. I am not sure about LEDs. The kit supports an ISO layout.

Alright, thank you!
So I could use my Pok3r case for example? Would be interesting to know if I the build supports LED?

Yes, you can use a Pok3r case. The OP states that the PCB supports underglow leds. If they are SMD I suppose they come pre-soldered. Let the OP to confirm it. In-switch leds should be soldered along with the switches.


yes it support smd led for underglow and it comes with presoldered, use just need switches and cases and led if u want get backlight on switch :D

Can anyone recommend a case for this to make the most of the underglow etc?

u can use tex acrylic  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: cynviloq on Mon, 13 February 2017, 16:53:54
Can anyone recommend a case for this to make the most of the underglow etc?

If you're looking for cheaper side / clear, maybe a Doyu 60%? (http://shopkey.doyustudio.com/002kba0.html)

I'm probably going to pick up a 60% case from Jolimon once these arrive (https://www.jolimonkb.com/shop-online/)

Any acrylic case (white/frosted white to diffuse) would be a good way to show off the lights.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: beamingrobot on Tue, 14 February 2017, 00:14:17
In for this :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Tue, 14 February 2017, 04:06:17
In for this :D

YAS! HIT MOQ Thanks guys  :-*
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ktrezzi on Tue, 14 February 2017, 04:20:55


Looks like a real beauty!
What else do I need? Switchtes, stabs, (any) 60% case, keycaps?

Is it possible to build it with LED? (underglow or for each switch?) The plate supports ISO?

You will get a PCB and plate. You will require to source switches, key caps and a sixty case. I am not sure about LEDs. The kit supports an ISO layout.

Alright, thank you!
So I could use my Pok3r case for example? Would be interesting to know if I the build supports LED?

Yes, you can use a Pok3r case. The OP states that the PCB supports underglow leds. If they are SMD I suppose they come pre-soldered. Let the OP to confirm it. In-switch leds should be soldered along with the switches.


yes it support smd led for underglow and it comes with presoldered, use just need switches and cases and led if u want get backlight on switch :D

Can anyone recommend a case for this to make the most of the underglow etc?

u can use tex acrylic  ;D
Perfect! Thank you guys very much for all the information.
Last question: What option would I have to choose for a "standard" bottom row?

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Tue, 14 February 2017, 04:26:22

Perfect! Thank you guys very much for all the information.
Last question: What option would I have to choose for a "standard" bottom row?

6.25 is most standard layout
but you can use universal plate if sometimes you want change layout you dont need any plate again  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ktrezzi on Tue, 14 February 2017, 04:28:24

Perfect! Thank you guys very much for all the information.
Last question: What option would I have to choose for a "standard" bottom row?

6.25 is most standard layout
but you can use universal plate if sometimes you want change layout you dont need any plate again  ;)
Alright! That sounds all real perfect, can't wait to place my order :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: geekhackuserx on Tue, 14 February 2017, 20:09:21
Order form is open until the 28th still right? Does not close just because of MOQ?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: kenshinjeff on Tue, 14 February 2017, 20:51:36
Oh this is an interesting board. May I know where is the usb located, and who is cutting the plates? It looks like it may be able to fit a duck viper. (But I may be wrong)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: gadzkun on Tue, 14 February 2017, 21:09:25
Order form is open until the 28th still right? Does not close just because of MOQ?

its open until 28th :)

Oh this is an interesting board. May I know where is the usb located, and who is cutting the plates? It looks like it may be able to fit a duck viper. (But I may be wrong)

it will compatible with common 60% case, so usb will located exactly the same as common 60% case.
pcb and plate made by leeku and it wont fit viper unfortunately.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ChitownM2 on Tue, 14 February 2017, 21:19:52
Filled out the form. Guess I need to find a 60% case now
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Tue, 14 February 2017, 22:43:56
Order form is open until the 28th still right? Does not close just because of MOQ?

stick to my first plan closed on 28th or extra time if we dont get MOQ  :)


Oh this is an interesting board. May I know where is the usb located, and who is cutting the plates? It looks like it may be able to fit a duck viper. (But I may be wrong)

it will compatible with common 60% case, so usb will located exactly the same as common 60% case.
pcb and plate made by leeku and it wont fit viper unfortunately.

Gadzkun already answer it for me thanks gadz  :-*

Filled out the form. Guess I need to find a 60% case now

Thank's bro u can find many case on aliexpress, but dont use high profile case if u wont blocked side look blank  ;)

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ppp on Thu, 16 February 2017, 00:57:04
This looks so cool! I honestly think this is endgame-level-esque for me  :-X :-X :-X
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: dyoungc on Thu, 16 February 2017, 02:02:12
Please check for my PM about changing my order.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 16 February 2017, 03:01:13
This looks so cool! I honestly think this is endgame-level-esque for me  :-X :-X :-X

 ;D

Please check for my PM about changing my order.

Edited  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: lunr on Thu, 16 February 2017, 09:58:53
I forgot to ask. Does this support pcb mount or plate mount stabiliers?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 16 February 2017, 10:03:40
I forgot to ask. Does this support pcb mount or plate mount stabiliers?
yes it's supported
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ideus on Thu, 16 February 2017, 10:42:03
I forgot to ask. Does this support pcb mount or plate mount stabiliers?
yes it's supported

The plate's design implied that the kit will take PCB mount stabs, only.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: teamrushpntball on Thu, 16 February 2017, 11:08:53
Sending you a pm about my order, changing plate design.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ChitownM2 on Thu, 16 February 2017, 13:14:14
Just noticed that the render shows a non-standard 60% case. I understand now why you're recommending a low-profile case.....

Since the plate is going to be exposed in those two corners, do you have any photos or examples of the aluminum and stainless options? I think I saw here previously you said the plates would be silver. Is that just the aluminum one or stainless too? Also when you say silver, do you mean silver anodized or that the plate is just raw aluminum or raw stainless both of which would be described as "silver"?

I liked the idea of the heavier brass plate but since it's going to be completely exposed in the corners I think I'm going to have to re-consider going with one of the other options...

Any chance of getting another render of what this will look like with an actual low profile case? The current render is kind of misleading as the final product isn't going to look like that at all since you're showing a normal profile case with the bottom corners filled in...
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: dyoungc on Thu, 16 February 2017, 16:43:27
In the split spacebar layout, will the PCB/plate support standard 2u stabilizers in both 2.25/2.75 spacebars?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 16 February 2017, 16:43:49
I forgot to ask. Does this support pcb mount or plate mount stabiliers?
yes it's supported

The plate's design implied that the kit will take PCB mount stabs, only.

aw yes you are right  :rolleyes:

Sending you a pm about my order, changing plate design.

done

Just noticed that the render shows a non-standard 60% case. I understand now why you're recommending a low-profile case.....

Since the plate is going to be exposed in those two corners, do you have any photos or examples of the aluminum and stainless options? I think I saw here previously you said the plates would be silver. Is that just the aluminum one or stainless too? Also when you say silver, do you mean silver anodized or that the plate is just raw aluminum or raw stainless both of which would be described as "silver"?

I liked the idea of the heavier brass plate but since it's going to be completely exposed in the corners I think I'm going to have to re-consider going with one of the other options...

Any chance of getting another render of what this will look like with an actual low profile case? The current render is kind of misleading as the final product isn't going to look like that at all since you're showing a normal profile case with the bottom corners filled in...

That's silver anodized alu, i dont have any sample foto when i ask leeku he said dont have any sample for plate
I will try to make render for lower case profile ASAP
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Thu, 16 February 2017, 16:48:08
In the split spacebar layout, will the PCB/plate support standard 2u stabilizers in both 2.25/2.75 spacebars?

yes
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Sun, 19 February 2017, 22:51:21
Because this GB has hit moq, i will start invoicing this day or tommorow but dont worry payment deadline will be 7 march and order form still closed on 28 feb. If all order has paid on 28 feb i will pay order to leeku next day so it will make faster right ?  :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: beamingrobot on Mon, 20 February 2017, 01:58:19
paid  :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: menuhin on Mon, 20 February 2017, 05:36:26
PM-ed for order change.
silentreader, please send me the invoice for my modified order. Thanks! :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Mon, 20 February 2017, 05:41:36
paid  :D

 :thumb:

PM-ed for order change.
silentreader, please send me the invoice for my modified order. Thanks! :thumb:

invoice modified u can check it again  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Daphen on Mon, 20 February 2017, 06:15:11
So normal HHKB split shift is not possible? I'd like a normal HHKB but with the split spacebar layout, that would be amazing for me personally, I'm so used to HHKB arrows that I couldn't go back to dedicated arrows.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Mon, 20 February 2017, 06:19:54
So normal HHKB split shift is not possible? I'd like a normal HHKB but with the split spacebar layout, that would be amazing for me personally, I'm so used to HHKB arrows that I couldn't go back to dedicated arrows.
is that iso hhkb with 1u shift? sadly i can't change any layout this time, it has been final layout what i got from IC thread

Sent from my 2014811 using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: teamrushpntball on Mon, 20 February 2017, 06:54:50
Just paid! Excited for this build.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: babyphil on Mon, 20 February 2017, 19:07:33
Paid. Now I need to figure out what switches for this build.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Vadurr on Mon, 20 February 2017, 19:14:45
Cant wait to see a more accurate render of this !
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: tuco on Mon, 20 February 2017, 19:29:44
Paid!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: depreshun on Mon, 20 February 2017, 21:38:44
Paid. Will the plates be just alu colored?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Mon, 20 February 2017, 21:44:24
Paid. Now I need to figure out what switches for this build.

Paid!

Just paid! Excited for this build.

 :thumb: :thumb: :thumb:

Cant wait to see a more accurate render of this !

i'm currently make custom plate here and bought 1 acrylic case, maybe tommorow i can update picture of that. It will be better than render right?  :p

Paid. Will the plates be just alu colored?

This what i got from leeku :
SS material will be mirror finish
Alu silver anodize
Brass gold shinny like TX plate
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: DuFF on Mon, 20 February 2017, 23:14:03
paid
cant wait to build my first split spacebar + brass plate board!
also nicely timed with zealios round 5 ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: nemo_gh on Tue, 21 February 2017, 04:36:43
ordered   
waiting for the case ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Vadurr on Tue, 21 February 2017, 04:37:18
Paid. Now I need to figure out what switches for this build.

Paid!

Just paid! Excited for this build.

 :thumb: :thumb: :thumb:

Cant wait to see a more accurate render of this !

i'm currently make custom plate here and bought 1 acrylic case, maybe tommorow i can update picture of that. It will be better than render right?  :p

Paid. Will the plates be just alu colored?

This what i got from leeku :
SS material will be mirror finish
Alu silver anodize
Brass gold shinny like TX plate

Looking forward to a picture update! :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Tue, 21 February 2017, 08:18:49
I still wait for my acrylic case came home but here's i got picture of plate with keycap inserted  ;D

(http://i.imgur.com/N2EU8No.jpg)

(http://i.imgur.com/cRFEOaf.jpg)

NOTE: YAS62 text on right corner will be blank on your order i just make it for me  :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: Che.R.Ry on Tue, 21 February 2017, 08:31:29
I still wait for my acrylic case came home but here's i got picture of plate with keycap inserted  ;D

Show Image
(http://i.imgur.com/N2EU8No.jpg)


Show Image
(http://i.imgur.com/cRFEOaf.jpg)


NOTE: YAS62 text on right corner will be blank on your order i just make it for me  :p

omg looks great with split spacebar  :eek:
on pic1, that's universal plate right? just wanna make sure
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Tue, 21 February 2017, 08:41:02
I still wait for my acrylic case came home but here's i got picture of plate with keycap inserted  ;D

Show Image
(http://i.imgur.com/N2EU8No.jpg)


Show Image
(http://i.imgur.com/cRFEOaf.jpg)


NOTE: YAS62 text on right corner will be blank on your order i just make it for me  :p

omg looks great with split spacebar  :eek:
on pic1, that's universal plate right? just wanna make sure

u can add many key on split spacebar make it great for 60% layout  :))

yes that's universal plate
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ipreferpie on Tue, 21 February 2017, 09:28:30
Does anyone know if the bottom corner keys would fit into the blocked corner HHKB Xondat's X60 case?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Tue, 21 February 2017, 09:34:08
Does anyone know if the bottom corner keys would fit into the blocked corner HHKB Xondat's X60 case?

no this blocker size is 0.75u, it will be ok with left blocker i think but on the right side u will lose arrow key
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: menuhin on Tue, 21 February 2017, 12:39:47
I still wait for my acrylic case came home but here's i got picture of plate with keycap inserted  ;D

Show Image
(http://i.imgur.com/N2EU8No.jpg)


Show Image
(http://i.imgur.com/cRFEOaf.jpg)


NOTE: YAS62 text on right corner will be blank on your order i just make it for me  :p

Is this a brass plate?
This is already looking great!  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: teamrushpntball on Tue, 21 February 2017, 14:23:11
Just ordered a black cherry low profile case and matching wrist rest to go with this.  Unsure on Nantucket Selectric or GMK Plum for my keyset still. 

That and zealios or Mod switches will finish out my build.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: yasintahir on Tue, 21 February 2017, 17:11:53
Is this a brass plate?
This is already looking great!  :thumb:

Thanks  ;D
Nope that's stainless steel with hardline finish, i just can found that material here  :))

Just ordered a black cherry low profile case and matching wrist rest to go with this.  Unsure on Nantucket Selectric or GMK Plum for my keyset still. 

That and zealios or Mod switches will finish out my build.

That's Great! since Nantucket and Plum is my favorite colorway too also i love that zealios and Mod M
(http://i.imgur.com/RSPWmPA.png)

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: cusx on Wed, 22 February 2017, 09:34:35
quick question from a first time builder, are there anything special with this 60% layout? Can I just buy any 60% case and it will fit?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Wed, 22 February 2017, 09:47:16
quick question from a first time builder, are there anything special with this 60% layout? Can I just buy any 60% case and it will fit?

You get arrow cluster on this 60% layout, and yes you can use universal 60% case i will post pict this plate on my universal case 60% tommorow still waiting to post man arrive in my home  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: jal on Wed, 22 February 2017, 09:59:27
Looking forward to playing with weird bottom-rows. Also, this will soak up a couple of the bent-plate cases I got from Alex that I otherwise have no idea what to do with.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: ppp on Wed, 22 February 2017, 11:53:53
Do you guys know if there's some kind of hhkb-style case I could get for this?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Collecting Order)
Post by: ChitownM2 on Wed, 22 February 2017, 15:24:48
Is this a brass plate?
This is already looking great!  :thumb:

Thanks  ;D
Nope that's stainless steel with hardline finish, i just can found that material here  :))

Just to make sure I've got everything straight, the plate pic above is the SS option, but it has a different finish than the one we will receive...

It looks like a brushed or matte finish on your "custom" place, but the SS one we will be receiving will be a "mirror" which I take to mean "polished" finish.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: dyoungc on Wed, 22 February 2017, 20:54:15
I have a question for everyone in on this GB, including myself

Is there a reason you chose this PCB over the banana split?
https://geekhack.org/index.php?topic=84891.0;topicseen

Still in IC phase but it seems to have a lot of attention (much more than the YAS), and I'm wondering why that is. I haven't been following the banana split IC, but it seems the difference between the 2 PCBs are flexibility in layout, arrow cluster orientation, and the 0.75u spaces. Is there something I'm missing, or is YAS the superior PCB?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: dyoungc on Wed, 22 February 2017, 21:35:47
Also, just checking if my invoice is correct.
I got 1 PCB $55, 1 brass plate $40, but the invoice is $99.18.
What is the additional charge of $4.18?
and What is the estimated shipping charge to NY, United States?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: DuFF on Wed, 22 February 2017, 21:52:45
I have a question for everyone in on this GB, including myself

Is there a reason you chose this PCB over the banana split?
https://geekhack.org/index.php?topic=84891.0;topicseen

Still in IC phase but it seems to have a lot of attention (much more than the YAS), and I'm wondering why that is. I haven't been following the banana split IC, but it seems the difference between the 2 PCBs are flexibility in layout, arrow cluster orientation, and the 0.75u spaces. Is there something I'm missing, or is YAS the superior PCB?

0.75 space on the left side makes typing for me alot more pleasent and i like brass plates
also there is 1 key either missing or misplaced on banana split for iso layout in the 4th row if i want to use a normal arrow cluster.

Also, just checking if my invoice is correct.
I got 1 PCB $55, 1 brass plate $40, but the invoice is $99.18.
What is the additional charge of $4.18?
and What is the estimated shipping charge to NY, United States?

4.4% paypal fees  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Wed, 22 February 2017, 22:01:17
Do you guys know if there's some kind of hhkb-style case I could get for this?

i still working with design to make custom case for this pcb



Just to make sure I've got everything straight, the plate pic above is the SS option, but it has a different finish than the one we will receive...

It looks like a brushed or matte finish on your "custom" place, but the SS one we will be receiving will be a "mirror" which I take to mean "polished" finish.

Yes, it is hard finish and you will get mirror finish one  ;D

I have a question for everyone in on this GB, including myself

Is there a reason you chose this PCB over the banana split?
https://geekhack.org/index.php?topic=84891.0;topicseen

Still in IC phase but it seems to have a lot of attention (much more than the YAS), and I'm wondering why that is. I haven't been following the banana split IC, but it seems the difference between the 2 PCBs are flexibility in layout, arrow cluster orientation, and the 0.75u spaces. Is there something I'm missing, or is YAS the superior PCB?

Also, just checking if my invoice is correct.
I got 1 PCB $55, 1 brass plate $40, but the invoice is $99.18.
What is the additional charge of $4.18?
and What is the estimated shipping charge to NY, United States?

First i will tell you if before i run this IC i'm wondering if iss62 run GB again but after he finsih with GB he is gone and then i found Banana Split IC but there's no arrow cluster option, i already told to him to put arrow cluster on that so gadzkun and i decide to make pcb it self with leeku. In the middle YAS62 IC i see banana split put arrow cluster so i think yess finally arrow and that and i start thinnking to stop my project and join banana split, but i look again on banana split layout i will be missing "/?" if i use arrow like XD60 meh i wont remap "/?" to somewhere else even i can use that r.shift "/?" and fn be r.shift but imo it will not look good if someone see your board dont have "/?" keys. So i decided to run again this project with basic layout from iss62 and i put more spacebar option in this board because i think why u put just 3 or 5 layout if u can add more option as it possible to make so here we are now  :))

and 2 for your invoice additional charge is paypal fee (i'm already write that on invoice) and for shipping i think you said me you will take this order on korea when it finish on june  :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: dyoungc on Wed, 22 February 2017, 23:19:39

I have a question for everyone in on this GB, including myself

Is there a reason you chose this PCB over the banana split?
https://geekhack.org/index.php?topic=84891.0;topicseen

Still in IC phase but it seems to have a lot of attention (much more than the YAS), and I'm wondering why that is. I haven't been following the banana split IC, but it seems the difference between the 2 PCBs are flexibility in layout, arrow cluster orientation, and the 0.75u spaces. Is there something I'm missing, or is YAS the superior PCB?

Also, just checking if my invoice is correct.
I got 1 PCB $55, 1 brass plate $40, but the invoice is $99.18.
What is the additional charge of $4.18?
and What is the estimated shipping charge to NY, United States?

First i will tell you if before i run this IC i'm wondering if iss62 run GB again but after he finsih with GB he is gone and then i found Banana Split IC but there's no arrow cluster option, i already told to him to put arrow cluster on that so gadzkun and i decide to make pcb it self with leeku. In the middle YAS62 IC i see banana split put arrow cluster so i think yess finally arrow and that and i start thinnking to stop my project and join banana split, but i look again on banana split layout i will be missing "/?" if i use arrow like XD60 meh i wont remap "/?" to somewhere else even i can use that r.shift "/?" and fn be r.shift but imo it will not look good if someone see your board dont have "/?" keys. So i decided to run again this project with basic layout from iss62 and i put more spacebar option in this board because i think why u put just 3 or 5 layout if u can add more option as it possible to make so here we are now  :))

and 2 for your invoice additional charge is paypal fee (i'm already write that on invoice) and for shipping i think you said me you will take this order on korea when it finish on june  :)

That's very interesting. So the YAS was originally an improvement to the banana split before it had arrow keys. And now, it's been further improved to allow many more layout options. The missing "/?" key is also an important part of the layout. I think it was a good idea that you continued designing the YAS  :thumb:

You have good memory, or maybe just normal memory. I forgot that I changed the shipping to korea.  :))

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Wed, 22 February 2017, 23:27:43
Hi guys,

Finally my cases arrive to home this day in here's some picture

Because i still dont get my pcb so i put many plate to make it floating on low profile cases :))
More
(http://i.imgur.com/NIUNFfs.jpg)
(http://i.imgur.com/CkwobAp.jpg)
(http://i.imgur.com/6e20sTd.jpg)

and here's picture i'm using just 1 plate and it look like i use high profile cases, idk if this will be same or more deeper than this if use high profile cases because i don't have one  :p
More
(http://i.imgur.com/iXFziU2.jpg)
(http://i.imgur.com/C1Ce42w.jpg)

P.S sorry for potato pic  :))
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Wed, 22 February 2017, 23:30:56

That's very interesting. So the YAS was originally an improvement to the banana split before it had arrow keys. And now, it's been further improved to allow many more layout options. The missing "/?" key is also an important part of the layout. I think it was a good idea that you continued designing the YAS  :thumb:

You have good memory, or maybe just normal memory. I forgot that I changed the shipping to korea.  :))

Actually it's improvement from iss62 same blocker on the side but they have custom acrylic cases on sale before.
Because just you want to take it at korea so i remember it  :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: breitling on Thu, 23 February 2017, 01:21:36
this is pretty cool, and ive been looking for a new 60% for an empty case i have! joined.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: Haroxicos on Thu, 23 February 2017, 01:37:25
Is the layout  1.5 / 1.5  / SPB 6 / 1.5 / 1 / 1 / 1 possible ?
If the answer is yes, Do i better take the 6U plate, the 3U plate or simply go with the universal one?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Thu, 23 February 2017, 01:46:25
Is the layout  1.5 / 1.5  / SPB 6 / 1.5 / 1 / 1 / 1 possible ?
If the answer is yes, Do i better take the 6U plate, the 3U plate or simply go with the universal one?
from what i see on this spacebar 6.25u and 6u u can use 6.25u hole for that layout, but i cant make sure 100% before try it on PCB it self
(https://uploads.tapatalk-cdn.com/20170223/446f9c09e8d0119b5e65aa73aaf374e2.jpg)

Damn sorry for ****ty picture  :))
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: menuhin on Thu, 23 February 2017, 03:01:34
What's good about brass plate?

Thinking of getting one more plate, SS or brass for linear switches.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Thu, 23 February 2017, 03:08:24
What's good about brass plate?

Thinking of getting one more plate, SS or brass for linear switches.

From what i know both brass and SS are best for linear and brass is denser than SS but not as hard as SS. If someone know more than this correct me if i'm wrong.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: menuhin on Thu, 23 February 2017, 04:55:10
Do you guys know if there's some kind of hhkb-style case I could get for this?

i still working with design to make custom case for this pcb
...

An option is to design 0.75u tailor-made blockers to go with a 60% case that will fit nicely with them.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Thu, 23 February 2017, 04:57:59
An option is to design 0.75u tailor-made blockers to go with a 60% case that will fit nicely with them.

Actually i want make 60% alu high profile case with 1 line diffuser in the middle, and i will add more top option for YAS62 blocker, 60% std, HHKB style, and WKL if needed)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: Dystopia on Thu, 23 February 2017, 06:30:08
An option is to design 0.75u tailor-made blockers to go with a 60% case that will fit nicely with them.

Actually i want make 60% alu high profile case with 1 line diffuser in the middle, and i will add more top option for YAS62 blocker, 60% std, HHKB style, and WKL if needed)

Please do!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: ppp on Thu, 23 February 2017, 09:53:26
Show Image
(http://i.imgur.com/iXFziU2.jpg)


omg. this looks so crazy sexy I might die.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: C7Kinetic on Thu, 23 February 2017, 14:59:16
An option is to design 0.75u tailor-made blockers to go with a 60% case that will fit nicely with them.

Actually i want make 60% alu high profile case with 1 line diffuser in the middle, and i will add more top option for YAS62 blocker, 60% std, HHKB style, and WKL if needed)

I would love this!!!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: DuFF on Fri, 24 February 2017, 00:39:37
Actually i want make 60% alu high profile case with 1 line diffuser in the middle, and i will add more top option for YAS62 blocker, 60% std, HHKB style, and WKL if needed)

i would definatly buy it!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: suspiciouscow on Fri, 24 February 2017, 11:50:44
An option is to design 0.75u tailor-made blockers to go with a 60% case that will fit nicely with them.

Actually i want make 60% alu high profile case with 1 line diffuser in the middle, and i will add more top option for YAS62 blocker, 60% std, HHKB style, and WKL if needed)

That would be really neat! Looking forward to this keyboard!! ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: teamrushpntball on Fri, 24 February 2017, 19:25:17
Does the PCB allow for LED backlighting of individual switches or just underglow?  If it's individual switches is it all of them or only certain ones? 

And if it does I assume sip sockets will work?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Sat, 25 February 2017, 03:27:12
Please do!

I would love this!!!

i would definatly buy it!

That would be really neat! Looking forward to this keyboard!! ;D

Hope i can finish design ASAP

omg. this looks so crazy sexy I might die.

Actually after i get this i want buy controller for make it handwired lol  :p

Does the PCB allow for LED backlighting of individual switches or just underglow?  If it's individual switches is it all of them or only certain ones? 

And if it does I assume sip sockets will work?

This PCB will support both underglow and backlighting, and sure it will work for sip sockets  ;D





Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: Komatoz on Sat, 25 February 2017, 04:31:41
Man....Really wanna go in on this group buy...but all the damn keysets coming out are making me broke AF 

Q_Q


By any chance, is this GB gonna happen again down the line?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Sat, 25 February 2017, 04:35:20
Man....Really wanna go in on this group buy...but all the damn keysets coming out are making me broke AF 

Q_Q


By any chance, is this GB gonna happen again down the line?

I started thinking to make v2 with less bottom option but PCB will be mx/alps support

and yes Keyset groupbuy never stop from last end year 2016  :))
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: menuhin on Sat, 25 February 2017, 04:42:10
An option is to design 0.75u tailor-made blockers to go with a 60% case that will fit nicely with them.

Actually i want make 60% alu high profile case with 1 line diffuser in the middle, and i will add more top option for YAS62 blocker, 60% std, HHKB style, and WKL if needed)

I like high profile case. :)
The design sounds similar to many of the creation of Duck0113. Do you work for him?  :p But I heard some bad reviews about PCBs of his keyboards, for sure Leeku is among the best. ;)

Please also think about the possibility to remove the 1 line diffuser layer in the middle.
There are already so many things to consider including forms and fit, and finish, etc. Just look at the 'simple' FJELL design, LeadreN told perhaps over a year working on it before having now the revision 4 prototype.
Looking forward to your design!  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: yasintahir on Sat, 25 February 2017, 04:48:21
I like high profile case. :)
The design sounds similar to many of the creation of Duck0113. Do you work for him?  :p But I heard some bad reviews about PCBs of his keyboards, for sure Leeku is among the best. ;)

Please also think about the possibility to remove the 1 line diffuser layer in the middle.
There are already so many things to consider including forms and fit, and finish, etc. Just look at the 'simple' FJELL design, LeadreN told perhaps over a year working on it before having now the revision 4 prototype.
Looking forward to your design!  :thumb:
i'm not working for duck just like they design lol

yes i love FJELL case too but i dont get raffle before :( maybe i will add optional for with/without diffuser i just like when i see diffuser for my underglow led just personal preference.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: Komatoz on Sat, 25 February 2017, 04:56:38
Man....Really wanna go in on this group buy...but all the damn keysets coming out are making me broke AF 

Q_Q


By any chance, is this GB gonna happen again down the line?

I started thinking to make v2 with less bottom option but PCB will be mx/alps support

and yes Keyset groupbuy never stop from last end year 2016  :))


Ahhhh sweeet!!

Im definitely gonna be in this for the next round!! This round my money is going to cry as it goes to Nautilus and Yuri  x_x
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (Invoicing + Close Order 28 feb)
Post by: menuhin on Sat, 25 February 2017, 05:35:47
I like high profile case. :)
The design sounds similar to many of the creation of Duck0113. Do you work for him?  :p But I heard some bad reviews about PCBs of his keyboards, for sure Leeku is among the best. ;)

Please also think about the possibility to remove the 1 line diffuser layer in the middle.
There are already so many things to consider including forms and fit, and finish, etc. Just look at the 'simple' FJELL design, LeadreN told perhaps over a year working on it before having now the revision 4 prototype.
Looking forward to your design!  :thumb:
i'm not working for duck just like they design lol

yes i love FJELL case too but i dont get raffle before :( maybe i will add optional for with/without diffuser i just like when i see diffuser for my underglow led just personal preference.

Me too, I couldn't get a place in the raffle of FJELL.
I like the idea of diffuser layer / filler for underglow.
Perhaps you can think about adding a CNC high profile frost/sandblasted acrylic version of your design? Design like that ran only once here and they look amazing with underglow and LEDs.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (2 DAYS LEFT!!!)
Post by: cusx on Sun, 26 February 2017, 04:34:28

I started thinking to make v2 with less bottom option but PCB will be mx/alps support

and yes Keyset groupbuy never stop from last end year 2016  :))

I'm still thinking whether I should join this round or next round.

Do you roughly have an idea which bottom option might be remove in v2?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (2 DAYS LEFT!!!)
Post by: yasintahir on Sun, 26 February 2017, 04:41:33

I started thinking to make v2 with less bottom option but PCB will be mx/alps support

and yes Keyset groupbuy never stop from last end year 2016  :))

I'm still thinking whether I should join this round or next round.

Do you roughly have an idea which bottom option might be remove in v2?
Still no idea which layout i will use for v2 and when it is happen.
after this v1 i will focus to make cases first
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: FoC_Tow on Tue, 28 February 2017, 08:57:35
Ordered and paid =)

A Case in this Layout would be the dream!
Pls silent <3
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: yasintahir on Tue, 28 February 2017, 09:29:15
Ordered and paid =)

A Case in this Layout would be the dream!
Pls silent <3
Thanks dude u are great! :thumb: :p

Still not have much time to finish design :(
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: suspiciouscow on Tue, 28 February 2017, 13:51:45
Paid! (:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: zacheadams on Tue, 28 February 2017, 15:39:30
I just put in for an order, was it too late?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: keebingitreal on Tue, 28 February 2017, 15:45:13
I just put in for an order, was it too late?

This.

I just put in an order too, do want :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: yasintahir on Tue, 28 February 2017, 16:56:34
I just put in for an order, was it too late?

I just put in for an order, was it too late?

This.

I just put in an order too, do want :D

I will close on 23.59 PT and i already sent invoice too  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: zacheadams on Tue, 28 February 2017, 17:02:52
I just put in for an order, was it too late?

I just put in for an order, was it too late?

This.

I just put in an order too, do want :D

I will close on 23.59 PT and i already sent invoice too  ;D

Just paid, cheers!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: mniels on Tue, 28 February 2017, 17:56:13
Geez, just realized something....too late to change from SS plate to brass?  My invoice was paid already....
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: yasintahir on Tue, 28 February 2017, 23:37:14
Just paid, cheers!
:cheers:  :thumb:


Geez, just realized something....too late to change from SS plate to brass?  My invoice was paid already....

I will change your order and send you invoice for additional charge  :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: FoC_Tow on Wed, 01 March 2017, 02:07:17
Ordered and paid =)

A Case in this Layout would be the dream!
Pls silent <3
Thanks dude u are great! :thumb: :p

Still not have much time to finish design :(

No rush silent, take your time.

Definitely in for two whenever the case drops! =)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 01 March 2017, 02:12:27
--------------FORM ORDER CLOSED----------------
Got 73 Order this is SICK!!! Thanks for all support

------------------------------------------------------

From voting form PCB color will be black, but i will ask leeku if we can go with new color PCB like Pink/Cyan but if it's not possible Black will be final option. And Plate will be switch top removal support!

(http://i.imgur.com/BCUVjDK.png)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 01 March 2017, 02:13:26
Ordered and paid =)

A Case in this Layout would be the dream!
Pls silent <3
Thanks dude u are great! :thumb: :p

Still not have much time to finish design :(

No rush silent, take your time.

Definitely in for two whenever the case drops! =)

Thanks for your support that's mean a lot  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (LAST DAY!!!)
Post by: mniels on Wed, 01 March 2017, 06:13:44
Just paid, cheers!
:cheers:  :thumb:


Geez, just realized something....too late to change from SS plate to brass?  My invoice was paid already....

I will change your order and send you invoice for additional charge  :D

Invoice paid, thank you!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: venjiang on Wed, 01 March 2017, 08:56:02
I want it.


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 01 March 2017, 09:13:10
I want it.


从我的 iPhone 发送,使用 Tapatalk

Just fill the form... since deadline payment 7th march i will close form on 3rd march
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: venjiang on Wed, 01 March 2017, 09:28:52
I want it.


从我的 iPhone 发送,使用 Tapatalk

Just fill the form... since deadline payment 7th march i will close form on 3rd march
thanks.


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: Liam on Wed, 01 March 2017, 10:29:37
I'll wait the answer for PCB color before I pay my invoice. Please I don't want my PCB to be black at all  :'( Cyan is a to go for me  :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 01 March 2017, 10:36:43
I'll wait the answer for PCB color before I pay my invoice. Please I don't want my PCB to be black at all  :'( Cyan is a to go for me  :)

It's because leeku said we need hundreds or thousand for pink and cyan it's still imposible.
and according to vote result black is highest choice sorry.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: FoC_Tow on Wed, 01 March 2017, 11:36:45
Pink would have been awesome! =O

It's probably best to go with a neutral color tho.

While I would love pink, there would probably be just as many people that don't.
Black seems like a solid choice,
especially since it got the most votes. XD

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: C7Kinetic on Wed, 01 March 2017, 14:32:31
I was really rooting for the white PCB. I think it would have looked slick with a brass plate.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: menuhin on Wed, 01 March 2017, 15:52:41
I voted for white color too...  :-*
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 01 March 2017, 16:44:13
I was really rooting for the white PCB. I think it would have looked slick with a brass plate.

I voted for white color too...  :-*

Pink would have been awesome! =O

It's probably best to go with a neutral color tho.

While I would love pink, there would probably be just as many people that don't.
Black seems like a solid choice,
especially since it got the most votes. XD

I know guys i get 43 votes for white but i got 59 for black  :p

Any suggest if we can get fresh PCB color from leeku?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 01 March 2017, 17:46:31
Try to make concept for next case, the idea is from leopard tank design.
Still 2D design btw  :p

(http://i.imgur.com/uRMe0O9.jpg)

EDIT :Forget about handle grip before  :))
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: mniels on Wed, 01 March 2017, 17:51:51
Try to make concept for next case, the idea is from leopard tank design.
Still 2D design btw  :p

Show Image
(http://i.imgur.com/1jVY9sV.jpg)


Must make YAS62 happen!!!!!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 01 March 2017, 18:00:21
Try to make concept for next case, the idea is from leopard tank design.
Still 2D design btw  :p

Show Image
(http://i.imgur.com/1jVY9sV.jpg)


Must make YAS62 happen!!!!!

Actually i want make this cases support all 60% layout style  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: mniels on Wed, 01 March 2017, 18:28:09
Try to make concept for next case, the idea is from leopard tank design.
Still 2D design btw  :p

Show Image
(http://i.imgur.com/1jVY9sV.jpg)


Must make YAS62 happen!!!!!

Actually i want make this cases support all 60% layout style  ;D

Yeah, but u was just speaking for my wants and needs.


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: mniels on Wed, 01 March 2017, 20:32:23
I mean I was speaking for my needs....


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: C7Kinetic on Wed, 01 March 2017, 20:54:38
Try to make concept for next case, the idea is from leopard tank design.
Still 2D design btw  :p

Show Image
(http://i.imgur.com/uRMe0O9.jpg)


EDIT :Forget about handle grip before  :))

I'm really liking the design so far! Keep up the great work  :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: Dystopia on Thu, 02 March 2017, 06:15:48
Try to make concept for next case, the idea is from leopard tank design.
Still 2D design btw  :p

Show Image
(http://i.imgur.com/uRMe0O9.jpg)


EDIT :Forget about handle grip before  :))

Yes to chamfered edges! Been a huge fan of those since I saw the Fjell. Also interesting how you said you wanted that case to support all those layouts unless I'm understanding it wrong. Maybe screw-on blockers?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Thu, 02 March 2017, 07:21:39
I mean I was speaking for my needs....

Sent from my iPhone using Tapatalk
I know and of course YAS62 is my priority  :p

I'm really liking the design so far! Keep up the great work  :D
Thanks!

Yes to chamfered edges! Been a huge fan of those since I saw the Fjell. Also interesting how you said you wanted that case to support all those layouts unless I'm understanding it wrong. Maybe screw-on blockers?

Yes screw on blocker. But i started think to remove diffuser for make it not sandwich style  :-\

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: Dystopia on Thu, 02 March 2017, 07:46:30
I mean I was speaking for my needs....

Sent from my iPhone using Tapatalk
I know and of course YAS62 is my priority  :p

I'm really liking the design so far! Keep up the great work  :D
Thanks!

Yes to chamfered edges! Been a huge fan of those since I saw the Fjell. Also interesting how you said you wanted that case to support all those layouts unless I'm understanding it wrong. Maybe screw-on blockers?

Yes screw on blocker. But i started think to remove diffuser for make it not sandwich style  :-\

I would personally be fine without diffusers. Sometimes diffusers makes the case look less premium imo. But hey, to each their own, so I won't judge or demand no diffusers.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: menuhin on Thu, 02 March 2017, 10:35:55

...
Yes to chamfered edges! Been a huge fan of those since I saw the Fjell. Also interesting how you said you wanted that case to support all those layouts unless I'm understanding it wrong. Maybe screw-on blockers?

Yes screw on blocker. But i started think to remove diffuser for make it not sandwich style  :-\

You may actually be making the right design decision here. Sandwich design may not be as firm as a solid block of aluminum.
There are millions of ways to let the underglow light out, such as Duck Octagon's diffuser blocks on both sides. Such diffusers can be added to all sides as well.

Please make a simple design, e.g. FJELL case, Hammer case, Duck mini case.
So far your design is going the direction of simple and elegant. I like it!  :thumb:

Please keep us posted.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: DuFF on Thu, 02 March 2017, 13:15:31
elegance is the key  :))
the chamfered edges look beautiful
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: SICAR187 on Thu, 02 March 2017, 20:39:39
Is the case happening?

Sent from my SM-G935V using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Thu, 02 March 2017, 22:10:01
I would personally be fine without diffusers. Sometimes diffusers makes the case look less premium imo. But hey, to each their own, so I won't judge or demand no diffusers.

You may actually be making the right design decision here. Sandwich design may not be as firm as a solid block of aluminum.
There are millions of ways to let the underglow light out, such as Duck Octagon's diffuser blocks on both sides. Such diffusers can be added to all sides as well.

Please make a simple design, e.g. FJELL case, Hammer case, Duck mini case.
So far your design is going the direction of simple and elegant. I like it!  :thumb:

Please keep us posted.

elegance is the key  :))
the chamfered edges look beautiful

Thanks guys i will make 3d render if i have get time again  :p

Is the case happening?

Sent from my SM-G935V using Tapatalk

Not yet. I will make IC Thread when it's ready

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: mniels on Thu, 02 March 2017, 22:27:46
Just a heads up that the plate change that I made isn't on the spreadsheet yet.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Thu, 02 March 2017, 22:31:32
Just a heads up that the plate change that I made isn't on the spreadsheet yet.

Brass Plate right? sorry forget to change it before. Now it's good  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: topsykrett on Mon, 06 March 2017, 10:29:48
Can't wait for the case to go along with this. I personally vote to keep some type of diffuser to make the underglow useful, but ether way I am looking forward to whatever you design!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: Che.R.Ry on Mon, 06 March 2017, 10:39:14
PAID! (finally) :))
Sorry my money goes to zealios first lmao

Cant wait for the case design
I hope there will be unique ways to bring the underglow lights out
So excited for my first custom board  :p
Hype is real :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: yasintahir on Wed, 08 March 2017, 03:08:38
-------------------------------------------------------------------UPDATE----------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------

I'm already submitted order to leeku, and here's some good news and bad news:

Good news is production will take 2 month maksimum but it will be sooner than that.

Bad news leeku said he's not sure if vendor can do 5 type of plate he though it can be universal only but he will ask again to make sure. This problem is my bad because i thought i can order many type plate as leeku said to me before no MOQ for plate so i make it 5 option without ask him before.So let me know what do you think if can be universal plate only? Sorry for this problem before.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: Dystopia on Wed, 08 March 2017, 05:11:26
-------------------------------------------------------------------UPDATE----------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------

I'm already submitted order to leeku, and here's some good news and bad news:

Good news is production will take 2 month maksimum but it will be sooner than that.

Bad news leeku said he's not sure if vendor can do 5 type of plate he though it can be universal only but he will ask again to make sure. This problem is my bad because i thought i can order many type plate as leeku said to me before no MOQ for plate so i make it 5 option without ask him before.So let me know what do you think if can be universal plate only? Sorry for this problem before.

Hmm, I would certainly prefer to have the individual plates for different layouts, but I don't think a universal plate would hurt me much. On the other hand, faster production is great news!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: teamrushpntball on Wed, 08 March 2017, 05:51:34
I agree with Dystopia, if the option is available I'd prefer a specific layout plate over a universal but it's not that big of an issue if not.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER CLOSED | INVOICING COMPLETE!)
Post by: Che.R.Ry on Wed, 08 March 2017, 08:09:09
-------------------------------------------------------------------UPDATE----------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------

I'm already submitted order to leeku, and here's some good news and bad news:

Good news is production will take 2 month maksimum but it will be sooner than that.

Bad news leeku said he's not sure if vendor can do 5 type of plate he though it can be universal only but he will ask again to make sure. This problem is my bad because i thought i can order many type plate as leeku said to me before no MOQ for plate so i make it 5 option without ask him before.So let me know what do you think if can be universal plate only? Sorry for this problem before.
its not a big problem for me since i ordered the universal one, dunno about the other :p
faster production is such a great news ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: child on Wed, 08 March 2017, 17:12:23
I'm ok with universal plate as long as the brass version is sturdy enough.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Wed, 08 March 2017, 19:15:14
Individual layouts would be much preferred tbh, but universal wouldn't be a dealbrealer.

In case plates get changed to universal, would we get a chance to modify our order again tho?
I'm asking because I ordered additional plates to have options, but a single universal per pcb would cover these.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: babyphil on Wed, 08 March 2017, 20:50:43
I'm fine with the universal plate.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Thu, 09 March 2017, 08:01:12
Individual layouts would be much preferred tbh, but universal wouldn't be a dealbrealer.

In case plates get changed to universal, would we get a chance to modify our order again tho?
I'm asking because I ordered additional plates to have options, but a single universal per pcb would cover these.

+ if plate changes to universal, can we pull out of the GB?

 :(

(To be clear I'm still super interested if the plate is nonuniversal, it's much cleaner)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 09 March 2017, 11:26:30
I will let you guys know when i got word from leeku. Personally i still want we can use specific plate for we needed.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Sun, 12 March 2017, 18:09:03
Any updates, either on Leeku's plate or on IC for a case?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Mon, 13 March 2017, 04:45:23
Any updates, either on Leeku's plate or on IC for a case?

Leeku still don't reply my email, i think he's busy because he said he will go to san jose on 15 march.
For case i still making render after this done i will start make IC thread soon.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Mon, 13 March 2017, 11:25:49
÷_÷

Case HYPE! <3
Will PCBs be available im the case GB again?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Mon, 13 March 2017, 16:45:40
÷_÷

Case HYPE! <3
Will PCBs be available im the case GB again?

I think it will be GB for case only.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Mon, 13 March 2017, 17:26:52
I'd prefer individual plates, but if we have to go universal I may want to change my order to get 1 brass and 1 SS rather than 2 of the same.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Tue, 14 March 2017, 11:13:39
÷_÷

Case HYPE! <3
Will PCBs be available im the case GB again?

I think it will be GB for case only.

Luckily I got more then one pcb already
Will there be an moq for the cases tho?

If the gb is for cases only, orders will be limited to those who already have the pcb.

If you offer complete sets aswell tho, the gb will most likely attract more people.

Im guessing it's difficult because then new pcb order would need to reach moq again aswell, but it would help out the case in term of moq...
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Tue, 14 March 2017, 11:54:39

Luckily I got more then one pcb already
Will there be an moq for the cases tho?

If the gb is for cases only, orders will be limited to those who already have the pcb.

If you offer complete sets aswell tho, the gb will most likely attract more people.

Im guessing it's difficult because then new pcb order would need to reach moq again aswell, but it would help out the case in term of moq...

This is definitely true. Especially if you don't get the case GB going pretty soon. People bought the pcb with the assumption we would need to get a case on our own so a lot of people are going to do that and only a portion of them will buy the custom Yas62 case then. To maximize case sales people are going to have to get them within a reasonable time frame after the PCB and plates arrive.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Tue, 14 March 2017, 17:16:49

Luckily I got more then one pcb already
Will there be an moq for the cases tho?

If the gb is for cases only, orders will be limited to those who already have the pcb.

If you offer complete sets aswell tho, the gb will most likely attract more people.

Im guessing it's difficult because then new pcb order would need to reach moq again aswell, but it would help out the case in term of moq...


This is definitely true. Especially if you don't get the case GB going pretty soon. People bought the pcb with the assumption we would need to get a case on our own so a lot of people are going to do that and only a portion of them will buy the custom Yas62 case then. To maximize case sales people are going to have to get them within a reasonable time frame after the PCB and plates arrive.

Actually moq for PCB for round 2 is lowest as leeku said becuase vendor has get design PCB before.
And my plan is run case for v1 will be limited like 30pcs or less and run in the middle of PCB production, so for everyone who buy YAS62 PCB they no need too much time for PCB and case come to their home. Maybe i will run GB for complete set for round 2 but i'm not sure it will run soon after R1 end.

----And Good News----
Leeku said we still can use specific plate type because i make design fo that so he just need to find vendor to do that and will give me some update for moq and invoice soon.


Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Tue, 14 March 2017, 17:30:51
Great news!
I was just concerned moq could be an issue.

Definitely in for 2 cases!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Tue, 14 March 2017, 17:37:36
Great news!
I was just concerned moq could be an issue.

Definitely in for 2 cases!

Yes i'm worried for plate moq now, hopefully we don't face any problem again and this GB going smooth.

I'm not sure for order more than 1pcs, i will raffle if i get much oder but for people who ordering YAS62 will be my priority.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Tue, 14 March 2017, 17:50:29
Great news!
I was just concerned moq could be an issue.

Definitely in for 2 cases!

Yes i'm worried for plate moq now, hopefully we don't face any problem again and this GB going smooth.

I'm not sure for order more than 1pcs, i will raffle if i get much oder but for people who ordering YAS62 will be my priority.

This is fantastic news.  I am incredibly interested in ordering a case then.

Thanks for the updates!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Tue, 14 March 2017, 18:08:44
Great news!
I was just concerned moq could be an issue.

Definitely in for 2 cases!

Yes i'm worried for plate moq now, hopefully we don't face any problem again and this GB going smooth.

I'm not sure for order more than 1pcs, i will raffle if i get much oder but for people who ordering YAS62 will be my priority.

This is fantastic news.  I am incredibly interested in ordering a case then.

Thanks for the updates!

Thanks for your support. Since this is my first GB you guys awesome, i don't think i can get many support for newbie like me but i will give my best to pay you're support. :cheers:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: C7Kinetic on Tue, 14 March 2017, 18:18:21

Luckily I got more then one pcb already
Will there be an moq for the cases tho?

If the gb is for cases only, orders will be limited to those who already have the pcb.

If you offer complete sets aswell tho, the gb will most likely attract more people.

Im guessing it's difficult because then new pcb order would need to reach moq again aswell, but it would help out the case in term of moq...


This is definitely true. Especially if you don't get the case GB going pretty soon. People bought the pcb with the assumption we would need to get a case on our own so a lot of people are going to do that and only a portion of them will buy the custom Yas62 case then. To maximize case sales people are going to have to get them within a reasonable time frame after the PCB and plates arrive.

Actually moq for PCB for round 2 is lowest as leeku said becuase vendor has get design PCB before.
And my plan is run case for v1 will be limited like 30pcs or less and run in the middle of PCB production, so for everyone who buy YAS62 PCB they no need too much time for PCB and case come to their home. Maybe i will run GB for complete set for round 2 but i'm not sure it will run soon after R1 end.

----And Good News----
Leeku said we still can use specific plate type because i make design fo that so he just need to find vendor to do that and will give me some update for moq and invoice soon.

That's great to hear! I'm definitely looking to get a case when the GB runs. Hopefully everyone in this GB who ends up wanting the case can end up with one.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Tue, 14 March 2017, 18:35:51
I ordered 2 pcb and plates so I'll be in for at least 1 case. Maybe 2 depending on availability and how soon after the pcb they will be ready.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Che.R.Ry on Wed, 15 March 2017, 07:59:47

Luckily I got more then one pcb already
Will there be an moq for the cases tho?

If the gb is for cases only, orders will be limited to those who already have the pcb.

If you offer complete sets aswell tho, the gb will most likely attract more people.

Im guessing it's difficult because then new pcb order would need to reach moq again aswell, but it would help out the case in term of moq...


This is definitely true. Especially if you don't get the case GB going pretty soon. People bought the pcb with the assumption we would need to get a case on our own so a lot of people are going to do that and only a portion of them will buy the custom Yas62 case then. To maximize case sales people are going to have to get them within a reasonable time frame after the PCB and plates arrive.

Actually moq for PCB for round 2 is lowest as leeku said becuase vendor has get design PCB before.
And my plan is run case for v1 will be limited like 30pcs or less and run in the middle of PCB production, so for everyone who buy YAS62 PCB they no need too much time for PCB and case come to their home. Maybe i will run GB for complete set for round 2 but i'm not sure it will run soon after R1 end.

----And Good News----
Leeku said we still can use specific plate type because i make design fo that so he just need to find vendor to do that and will give me some update for moq and invoice soon.

I hope my money will be ready when the cases GB open lol :'(
#RIPWallet
q1 2017 really rape my wallet already and much to come  :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: topsykrett on Wed, 15 March 2017, 09:49:32
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ppp on Wed, 15 March 2017, 11:17:42
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this

I'll throw my hat in the ring and say I also like the idea of a premium case with a diffuser sandwiched in. I'd be down with a fatter diffuser though. I don't think you have to compromise between having a premium feel and a diffuser. There's definitely some kind of middle ground where a diffuser can still be tasteful imo.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Wed, 15 March 2017, 11:45:31
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this

If we even approach Duck or LZ-level of quality on this case, it'd be bonkers awesome.  We already have a Leeku-involved plate.

I'd be fine with any high-profile case with blockers (pls no low-profile sandwich, it'd defeat the purpose of having a custom case for this in the first place).
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Wed, 15 March 2017, 11:48:21
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this

If we even approach Duck or LZ-level of quality on this case, it'd be bonkers awesome.  We already have a Leeku-involved plate.

I'd be fine with any high-profile case with blockers (pls no low-profile sandwich, it'd defeat the purpose of having a custom case for this in the first place).

FYI Leeku make this plate from LZ  :p
And of course i love high profile case and i consider to make diffuser just on left and right side so it will make not sandwich style.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: child on Wed, 15 March 2017, 12:50:20
Does the PCB support Holtite sockets? There is a GB running for them right now.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Eszett on Wed, 15 March 2017, 13:06:04
- PCB $55, this is grossly overpriced. Guys, don't you see that?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ideus on Wed, 15 March 2017, 13:17:47
- PCB $55, this is grossly overpriced. Guys, don't you see that?

Comparing with what? Most sixty PCBs are priced at that range.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Wed, 15 March 2017, 13:31:40
Does the PCB support Holtite sockets? There is a GB running for them right now.

I don't know it's support or not becuase i never us holtite before but pin hole size in this PCB is 1.6mm.

- PCB $55, this is grossly overpriced. Guys, don't you see that?

I know it's high price for PCB but i don't take to much profit in this GB since i can get dream layout on my 60% that's enough for me.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: menuhin on Wed, 15 March 2017, 14:01:06
- PCB $55, this is grossly overpriced. Guys, don't you see that?

How much should it cost in a GB then in your opinion?

I'm new to this hobby and one other popular 60% PCB out there cost $120 in a GB, yet I still think I may want to have it.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Wed, 15 March 2017, 14:16:32
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this

If we even approach Duck or LZ-level of quality on this case, it'd be bonkers awesome.  We already have a Leeku-involved plate.

I'd be fine with any high-profile case with blockers (pls no low-profile sandwich, it'd defeat the purpose of having a custom case for this in the first place).

FYI Leeku make this plate from LZ  :p
And of course i love high profile case and i consider to make diffuser just on left and right side so it will make not sandwich style.

Yeah, this is all gold.  I really am thrilled to be a part of this.  I can't wait to see designs for the case.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Wed, 15 March 2017, 15:20:12
Super stoked for the case!

The possible limit of how many will be made is really scary tho.
Since there seems to be loads of interest, can we maybe do 50 instead of 30 by any chance silent? xD
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Wed, 15 March 2017, 16:38:25
Super stoked for the case!

The possible limit of how many will be made is really scary tho.
Since there seems to be loads of interest, can we maybe do 50 instead of 30 by any chance silent? xD

There appear to be 72 PCBs bought by 62 buyers - if we exclude those with unpaid invoices, it's 66 by 56 - I doubt 50/56 of the buyers will buy cases.  But I guess I don't care as long as I can get a case @__@
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: teamrushpntball on Wed, 15 March 2017, 16:40:07
I'm not sure if I'd buy one. I had a wood 60 percent made for this pcb.

Then again, it does look pretty nice in the early renders.

Sent from my SM-N910V using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Wed, 15 March 2017, 17:10:53
Super stoked for the case!

The possible limit of how many will be made is really scary tho.
Since there seems to be loads of interest, can we maybe do 50 instead of 30 by any chance silent? xD

Super stoked for the case!

The possible limit of how many will be made is really scary tho.
Since there seems to be loads of interest, can we maybe do 50 instead of 30 by any chance silent? xD

There appear to be 72 PCBs bought by 62 buyers - if we exclude those with unpaid invoices, it's 66 by 56 - I doubt 50/56 of the buyers will buy cases.  But I guess I don't care as long as I can get a case @__@

i made 69 PCB order to leeku and i know 30 pcs is not enough if we got a lot interest of cases but i don't wanna run it too much this time to make it going faster and you don't need to get hands on PCB and cases. Don't worry if this cases run faster and have good result i will break for 1 month and run again for v2.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: menuhin on Wed, 15 March 2017, 17:20:12
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this

If we even approach Duck or LZ-level of quality on this case, it'd be bonkers awesome.  We already have a Leeku-involved plate.

I'd be fine with any high-profile case with blockers (pls no low-profile sandwich, it'd defeat the purpose of having a custom case for this in the first place).

FYI Leeku make this plate from LZ  :p
And of course i love high profile case and i consider to make diffuser just on left and right side so it will make not sandwich style.

Please think about options to have openings for also the front and the back.  ;)
I'll be patiently waiting for your creation.  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Wed, 15 March 2017, 17:27:03
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this

If we even approach Duck or LZ-level of quality on this case, it'd be bonkers awesome.  We already have a Leeku-involved plate.

I'd be fine with any high-profile case with blockers (pls no low-profile sandwich, it'd defeat the purpose of having a custom case for this in the first place).

FYI Leeku make this plate from LZ  :p
And of course i love high profile case and i consider to make diffuser just on left and right side so it will make not sandwich style.

Please think about options to have openings for also the front and the back.  ;)
I'll be patiently waiting for your creation.  :thumb:

After i got 3d render i will post here and see how your's respon because this project for community and i want people who have idea can tell me if they have suggest to make it better or correct me if something missing. So people would be happy for what they will pay for and everyone can get what they need.  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Wed, 15 March 2017, 18:16:26
Thx a lot for all your efforts Silent <3

Patiently waiting aswell, and hyped for whenever we get to see the first case renders.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Che.R.Ry on Thu, 16 March 2017, 05:48:45
If you are still considering the design of the case, I just came across this and maybe something like it would be interesting: http://duck0113.tistory.com/141

Seeing this case for the first time myself, but it seems like that style with the smaller diffuser parts might be a good compromise between people looking for a more "premium" case and people who still want the diffuser (it also looks a bit like your first render). It looks like it might be expensive though.

Anyway, thanks for your hard work on all of this

I do agree with this idea tho
Smaller diffuser will make the case feels much more "premium" IMO
Thx once again for @silentreader for making this GB :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Captainbuttmonkey on Thu, 16 March 2017, 16:32:51
If the case is anything like an Eagle/Viper I will be happy to sell you my soul for it. Still gutted about missing that and the massive wait there will be for the next round.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 16 March 2017, 17:21:59
anyone similiar to autocad fault production check?
I send plate design from swillkb to leeku and leeku said LZ can't do this because got some fault productionon on this plate.
LZ can redraw file but for  universal only, and they can still use this design if it's already fixed or do this with risky of fault production.
So if everyone can help me here's file of plate i made from swill kb https://drive.google.com/open?id=0B2HX8aUYDw85TE43RUtfX29wV2M
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Sun, 19 March 2017, 21:58:30

Yes i'm worried for plate moq now, hopefully we don't face any problem again and this GB going smooth.

I'm not sure for order more than 1pcs, i will raffle if i get much oder but for people who ordering YAS62 will be my priority.

Any updates on the plate situation?

Still looking for a vendor that will mfr all the different options but with a low enough MOQ that we can get them built?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Sun, 19 March 2017, 22:19:20

Yes i'm worried for plate moq now, hopefully we don't face any problem again and this GB going smooth.

I'm not sure for order more than 1pcs, i will raffle if i get much oder but for people who ordering YAS62 will be my priority.

Any updates on the plate situation?

Still looking for a vendor that will mfr all the different options but with a low enough MOQ that we can get them built?

I just already paid all order to leeku yesterday and give all fixed plate design. So far we all in good track now  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 23 March 2017, 00:03:58
Just killing time with designing case. Stil bad design because i make it on sketchup and its hard to make poly on sketchup lol.

(http://i.imgur.com/ExakjnO.jpg)

(http://i.imgur.com/fVXRh9D.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 23 March 2017, 05:24:46
Got better render from my friend.

(http://i.imgur.com/DVVZTxn.png)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Thu, 23 March 2017, 07:59:13
Awesome Silent!
The case looks a bit too roundish overall imo, but maybe I'm just a fan of simple angular designs.

The render on page one looked very simple and clean for example.

Also is the case 9 degree angle?
Looks pretty steep to me
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Dystopia on Thu, 23 March 2017, 10:02:42
Just killing time with designing case. Stil bad design because i make it on sketchup and its hard to make poly on sketchup lol.

Show Image
(http://i.imgur.com/ExakjnO.jpg)


Show Image
(http://i.imgur.com/fVXRh9D.jpg)


Looks good so far! I agree that the radius on the corners could be a bit smaller though, gives it a sharper look. Also, will there be blockers for the empty corners?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: breitling on Thu, 23 March 2017, 12:34:02
yeah it would be nice to see a two piece case where the top piece with bezel has some blockers for the .75u notches.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Thu, 23 March 2017, 15:10:35
yeah it would be nice to see a two piece case where the top piece with bezel has some blockers for the .75u notches.

100% agreed.  And I second the sharpness comments, though I'd buy the case whether it's "sharp" or not.  I certainly liked the roundedness of the Exent.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: menuhin on Thu, 23 March 2017, 16:16:51
LOoking gOod!

Silent has his design style.  :thumb:

Would also like to know your blocked corner solution for this board, which makes all its difference from other boards.
Title: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Thu, 23 March 2017, 16:37:36
I can imagine that the 'closed' holes on the sides might also not be very practical from a machining standpoint.

Being closed of to the bottom, these could only be milled through the top acrylic inlay cutouts, which might be difficult or even worse require additional repositioning and milling from both sides rather then only milling from top and bottom.

Removing the bottom and back frame around the gaps on the side (so basically just having an overhang with acrylic inlays) would make things simpler by removing hard to reach areas and might even look better imo.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 23 March 2017, 18:14:25
I can imagine that the 'closed' holes on the sides might also not be very practical from a machining standpoint.

Being closed of to the bottom, these could only be milled through the top acrylic inlay cutouts, which might be difficult or even worse require additional repositioning and milling from both sides rather then only milling from top and bottom.

Removing the bottom and back frame around the gaps on the side (so basically just having an overhang with acrylic inlays) would make things simpler by removing hard to reach areas and might even look better imo.
Yes i think about that too i will try to make it on another tools, sketchup not good for this case design lol.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Thu, 23 March 2017, 20:38:17
Liking the way the case is looking, but I have to agree that the 0.75u blockers absolutely have to built into the case. Technically I guess that wouldn't make them blockers, but I'd like to see those 0.75u spaces filled by the top plate of the case without any seams, etc.

For me that is the primary reason to get this case over a low profile design. If they aren't included then I don't really see the point.

If the case design turns out to be truly incredible then you can probably offer it with two different top plates, one for yas62 (run this first) and then a standard 60% top plate as a second run for people who just want a 60% case for a standard 60% pcb bottom row.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Fri, 07 April 2017, 06:38:25
It's been two weeks since the last post and no IC for the case, any updates?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Fri, 07 April 2017, 06:52:19
It's been two weeks since the last post and no IC for the case, any updates?

I'm still waiting leeku to give me prototype maybe next week because he still in SF now and back to korea this week.
For cases my design still not finish yet and i'm busy for last two week so maybe i will working on prototype sunday :))
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Fri, 07 April 2017, 07:36:45
Really should probably start an IC thread for the case. Going to get crowded in here with all of the case talk and people checking in on the status of the pcb GB.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Fri, 07 April 2017, 08:26:06
Really should probably start an IC thread for the case. Going to get crowded in here with all of the case talk and people checking in on the status of the pcb GB.

Yep i will make another thread after i'm done with design  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Sat, 15 April 2017, 18:22:41
Hi guys,

It's been long time no update because i'm waiting leeku back from US before.
So i get timeline update's from leeku :
- Plate will be done on end of may
- And PCB will be done sooner than that. So if it's don't get any delay your order will be shipped out on early june.

Thanks!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Sat, 15 April 2017, 19:34:40
Hi guys,

It's been long time no update because i'm waiting leeku back from US before.
So i get timeline update's from leeku :
- Plate will be done in end of may
- And PCB will be done sooner than that. So if it's don't get any delay your order will be shipped out on eraly june.

Thanks!

Thanks for the update!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Sat, 15 April 2017, 20:15:10
Hi guys,

It's been long time no update because i'm waiting leeku back from US before.
So i get timeline update's from leeku :
- Plate will be done in end of may
- And PCB will be done sooner than that. So if it's don't get any delay your order will be shipped out on eraly june.

Thanks!

Thanks for the update!

Your welcome dude, beacuse if delay or not i stiil need to keep you guy's updated. I want give my best for this GB  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: C7Kinetic on Sun, 16 April 2017, 01:51:34
Hi guys,

It's been long time no update because i'm waiting leeku back from US before.
So i get timeline update's from leeku :
- Plate will be done on end of may
- And PCB will be done sooner than that. So if it's don't get any delay your order will be shipped out on early june.

Thanks!

Nice to see a timeline. Appreciate the update!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: menuhin on Sun, 16 April 2017, 06:33:40
Thanks for the update.

Please keep the case project alive, slowly but surely! :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Sun, 16 April 2017, 07:08:18

Nice to see a timeline. Appreciate the update!

Thanks!

Thanks for the update.

Please keep the case project alive, slowly but surely! :)

Sadly i'm out of money to make prototype lol :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: menuhin on Sun, 16 April 2017, 08:15:00

Thanks for the update.

Please keep the case project alive, slowly but surely! :)

Sadly i'm out of money to make prototype lol :p

It depends on where you have your prototypes made.
It's pretty cheap if you seek help from some of those TaoBao CNC service. I am not saying that the CNC alu case GBs here are vastly over-priced, but in general, a CNC aluminium prototype case from TaoBao created from your own CAD cost definitely less than $250, or even less than $150. (FYI, more than one CNC service there quoted < $100 for keyboard case)
$150 is still money though.   :-*
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Mon, 17 April 2017, 00:35:15

Thanks for the update.

Please keep the case project alive, slowly but surely! :)

Sadly i'm out of money to make prototype lol

It depends on where you have your prototypes made.
It's pretty cheap if you seek help from some of those TaoBao CNC service. I am not saying that the CNC alu case GBs here are vastly over-priced, but in general, a CNC aluminium prototype case from TaoBao created from your own CAD cost definitely less than $250, or even less than $150. (FYI, more than one CNC service there quoted < $100 for keyboard case)
$150 is still money though.   :-*
yep that's still money i need to get a job to get money XD
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ppp on Tue, 25 April 2017, 07:38:29
Do you have any updates or maybe a timeline of when shipping will begin? Thanks!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Tue, 25 April 2017, 07:49:57
Do you have any updates or maybe a timeline of when shipping will begin? Thanks!

it will be finish by end of may and will be ship in early june.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: PlastikSchnittstelle on Wed, 26 April 2017, 04:13:21
really happy i'm part of this GB :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ppp on Wed, 26 April 2017, 17:01:46
Do you have any updates or maybe a timeline of when shipping will begin? Thanks!

it will be finish by end of may and will be ship in early june.

Thanks! Super excited  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Shadowalker on Mon, 01 May 2017, 06:53:03
Craaaaap.

I just found this thread after getting into MK's recently.  This layout is like my perfect dream keyboard atm - 60% with a split spacebar :D

Is there going to be another GB sometime after this one? 

Or alternatively, if anyone gets their PCB and decides they don't want it, let me know - I'll be happy to buy it

Good luck with your boards guys!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Mon, 01 May 2017, 10:38:36
Craaaaap.

I just found this thread after getting into MK's recently.  This layout is like my perfect dream keyboard atm - 60% with a split spacebar :D

Is there going to be another GB sometime after this one? 

Or alternatively, if anyone gets their PCB and decides they don't want it, let me know - I'll be happy to buy it

Good luck with your boards guys!

Follow this thread here: https://geekhack.org/index.php?topic=84891.0

It's probably going to have more layouts that you'd be interested in.  The guy has had it in interest check a long time, but is a fantastic GB runner - did an Alps plate run in like 2-3 weeks from signup to delivery...
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: dyoungc on Mon, 01 May 2017, 13:33:28
Craaaaap.

I just found this thread after getting into MK's recently.  This layout is like my perfect dream keyboard atm - 60% with a split spacebar :D

Is there going to be another GB sometime after this one? 

Or alternatively, if anyone gets their PCB and decides they don't want it, let me know - I'll be happy to buy it

Good luck with your boards guys!

Follow this thread here: https://geekhack.org/index.php?topic=84891.0

It's probably going to have more layouts that you'd be interested in.  The guy has had it in interest check a long time, but is a fantastic GB runner - did an Alps plate run in like 2-3 weeks from signup to delivery...

Banana split has a good branding and more people involved in the IC, but I think YAS is overall a better PCB. With banana split, there is a single spacebar configuration, while the YAS has something like 6 layouts just for the spacebar. Plus, manufacturing is managed in Korea by a reputable long-time member of the MK community. Silent said he originally started his design in response to the banana before they added their arrow cluster, but decided to keep it going bc the banana was also missing the "/ ?" key.
Depends on which layout you're looking for and whether you can get used to a remapped question mark.
Split spacebar layout is becoming more popular these days so if you can wait, I'm sure there will be similar designs coming out that will suit what you're looking for. There are also a few non-custom prebuilt boards out there if you search.

Hopefully, Silent can do R2 YAS. This is a great next-gen layout that doesn't compromise the classic elements of 60%, and I think it should be in everyone's hands. If the IC phase was longer and PCB had better brand image, I'm sure more people would have joined the GB.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Mon, 01 May 2017, 15:51:11
Craaaaap.

I just found this thread after getting into MK's recently.  This layout is like my perfect dream keyboard atm - 60% with a split spacebar :D

Is there going to be another GB sometime after this one? 

Or alternatively, if anyone gets their PCB and decides they don't want it, let me know - I'll be happy to buy it

Good luck with your boards guys!

Follow this thread here: https://geekhack.org/index.php?topic=84891.0

It's probably going to have more layouts that you'd be interested in.  The guy has had it in interest check a long time, but is a fantastic GB runner - did an Alps plate run in like 2-3 weeks from signup to delivery...

Banana split has a good branding and more people involved in the IC, but I think YAS is overall a better PCB. With banana split, there is a single spacebar configuration, while the YAS has something like 6 layouts just for the spacebar. Plus, manufacturing is managed in Korea by a reputable long-time member of the MK community. Silent said he originally started his design in response to the banana before they added their arrow cluster, but decided to keep it going bc the banana was also missing the "/ ?" key.
Depends on which layout you're looking for and whether you can get used to a remapped question mark.
Split spacebar layout is becoming more popular these days so if you can wait, I'm sure there will be similar designs coming out that will suit what you're looking for. There are also a few non-custom prebuilt boards out there if you search.

Hopefully, Silent can do R2 YAS. This is a great next-gen layout that doesn't compromise the classic elements of 60%, and I think it should be in everyone's hands. If the IC phase was longer and PCB had better brand image, I'm sure more people would have joined the GB.

I'm not trying to disrespect Silent here, I just meant if the other individual wants their keyboard faster, it's likely the Banana Split will hit GB and arrive at their doorstep before R2 YAS.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Mon, 01 May 2017, 17:49:25
Craaaaap.

I just found this thread after getting into MK's recently.  This layout is like my perfect dream keyboard atm - 60% with a split spacebar :D

Is there going to be another GB sometime after this one? 

Or alternatively, if anyone gets their PCB and decides they don't want it, let me know - I'll be happy to buy it

Good luck with your boards guys!

I bought two of these pcb and may be willing to sell one of them with my split space plate. Kind of tempted by the banana split board and likely won't need two 60% split space worth arrow clusters. Hit me up when this starts shipping and I will have decided by then which one I want to go with.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Mon, 01 May 2017, 18:27:21
Craaaaap.

I just found this thread after getting into MK's recently.  This layout is like my perfect dream keyboard atm - 60% with a split spacebar :D

Is there going to be another GB sometime after this one? 

Or alternatively, if anyone gets their PCB and decides they don't want it, let me know - I'll be happy to buy it

Good luck with your boards guys!

What's your priority ? split spacebar or arrow cluster? if it's just split spacebar 60% you can check banana split because in YAS62 you will find blocked corner on both side which there's people who don't like it.

And for R2? sure i will make it again but it will come with mx/alps PCB and less bottom layout configuration. But i will do R2 after i'm done with my project case.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: dyoungc on Mon, 01 May 2017, 21:23:16
Craaaaap.

I just found this thread after getting into MK's recently.  This layout is like my perfect dream keyboard atm - 60% with a split spacebar :D

Is there going to be another GB sometime after this one? 

Or alternatively, if anyone gets their PCB and decides they don't want it, let me know - I'll be happy to buy it

Good luck with your boards guys!

Follow this thread here: https://geekhack.org/index.php?topic=84891.0

It's probably going to have more layouts that you'd be interested in.  The guy has had it in interest check a long time, but is a fantastic GB runner - did an Alps plate run in like 2-3 weeks from signup to delivery...

Banana split has a good branding and more people involved in the IC, but I think YAS is overall a better PCB. With banana split, there is a single spacebar configuration, while the YAS has something like 6 layouts just for the spacebar. Plus, manufacturing is managed in Korea by a reputable long-time member of the MK community. Silent said he originally started his design in response to the banana before they added their arrow cluster, but decided to keep it going bc the banana was also missing the "/ ?" key.
Depends on which layout you're looking for and whether you can get used to a remapped question mark.
Split spacebar layout is becoming more popular these days so if you can wait, I'm sure there will be similar designs coming out that will suit what you're looking for. There are also a few non-custom prebuilt boards out there if you search.

Hopefully, Silent can do R2 YAS. This is a great next-gen layout that doesn't compromise the classic elements of 60%, and I think it should be in everyone's hands. If the IC phase was longer and PCB had better brand image, I'm sure more people would have joined the GB.

I'm not trying to disrespect Silent here, I just meant if the other individual wants their keyboard faster, it's likely the Banana Split will hit GB and arrive at their doorstep before R2 YAS.

I didnt mean for my post to seem hostile, sorry for the misunderstanding. I was just clarifying details from your previous post and passing on some helpful info.
Both PCBs have excellent design and quality, and are also unique enough to appeal to different preferences.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ppp on Thu, 11 May 2017, 12:57:42
Any word on a case in the works? If not I might have to start looking at some (time flies when you're having fun ;D ;D )

Been eyeing the 60% alu lambo cases...
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 11 May 2017, 18:02:52
Any word on a case in the works? If not I might have to start looking at some (time flies when you're having fun ;D ;D )

Been eyeing the 60% alu lambo cases...

I'm not sure my project case will be faster. You can look another 60% case for not wait to long :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Sun, 21 May 2017, 21:37:51
so I'm pretty new to mechanical boards and this will be my first build other than my whitefox and I'd like to figure out how to program it before it arrives.

Will this pcb use tmk? And if so, is there a good beginner tutorial somewhere for a person with no programming experience?   
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Sun, 21 May 2017, 21:44:13
so I'm pretty new to mechanical boards and this will be my first build other than my whitefox and I'd like to figure out how to program it before it arrives.

Will this pcb use tmk? And if so, is there a good beginner tutorial somewhere for a person with no programming experience?

No, all leeku PCB use jigon firmware and it come with GUI so it will be easy for beginner without programming experience  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: jacky on Mon, 22 May 2017, 23:31:43
Beautiful,may join in
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Slash Emperor on Tue, 23 May 2017, 07:29:47
Beautiful,may join in

Afraid entries have already closed for this.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Tue, 23 May 2017, 07:32:34
Beautiful,may join in

Thanks, but GB session is over. Maybe you can join R2 when i make it with cases  :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: menuhin on Tue, 23 May 2017, 10:32:44
Beautiful,may join in

Thanks, but GB session is over. Maybe you can join R2 when i make it with cases  :D

Please keep the case project going!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: FoC_Tow on Tue, 23 May 2017, 10:55:10
Beautiful,may join in

Thanks, but GB session is over. Maybe you can join R2 when i make it with cases  :D

Please keep the case project going!

+1

Need this case soo much <3 <3
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Tue, 23 May 2017, 18:00:35
Beautiful,may join in

Thanks, but GB session is over. Maybe you can join R2 when i make it with cases  :D

Please keep the case project going!

+1

Need this case soo much <3 <3

I hope i can start prototyping after NL-Bullet case plank go to anodize session. Because i will use same factory as NL-bullet use.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: teamrushpntball on Tue, 30 May 2017, 09:38:33
Any update on production and such?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Tue, 30 May 2017, 19:46:36
Hi guys...
Long time no update. Leeku got PCB sample yesterday so he will assembled it to test how it works.
After it done production will be begin again. Sorry for this long time  :-[

Thanks!

(http://i.imgur.com/mBVpN6Q.jpg)
(http://i.imgur.com/fhyRLtH.jpg)
(http://i.imgur.com/ODcc23i.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Wed, 31 May 2017, 17:30:21
Little late to be asking now, but is the pcb going to be pre soldered or do we need to source or own diodes and controller?

I just assumed all along it was pre soldered but I don't think it actually says one way or the other. The prototype pcb doesn't look to be though which is why I was wondering.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Wed, 31 May 2017, 17:38:25
Little late to be asking now, but is the pcb going to be pre soldered or do we need to source or own diodes and controller?

I just assumed all along it was pre soldered but I don't think it actually says one way or the other. The prototype pcb doesn't look to be though which is why I was wondering.

All PCB will come with presoldered  ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: iNViSiBiLiTi on Wed, 31 May 2017, 22:50:26
Got better render from my friend.

Show Image
(http://i.imgur.com/DVVZTxn.png)


Not in the GB, but that case design looks wicked! Really stands out from the rectangular blocks we usually see. 
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Che.R.Ry on Thu, 01 June 2017, 09:21:38
Hi guys...
Long time no update. Leeku got PCB sample yesterday so he will assembled it to test how it works.
After it done production will be begin again. Sorry for this long time  :-[

Thanks!

Show Image
(http://i.imgur.com/mBVpN6Q.jpg)

Show Image
(http://i.imgur.com/fhyRLtH.jpg)

Show Image
(http://i.imgur.com/ODcc23i.jpg)

wooo its getting closer and closer :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: child on Wed, 07 June 2017, 11:39:00
Long time no update. Leeku got PCB sample yesterday so he will assembled it to test how it works.
After it done production will be begin again. Sorry for this long time  :-[

Is there any updated time estimation?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Thu, 08 June 2017, 16:17:04
Any updates on how three pcb build went?

Still expecting to ship this month?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 08 June 2017, 19:27:20
Is there any updated time estimation?

Any updates on how three pcb build went?

Still expecting to ship this month?

Not possible to ship this month.
Leeku said to me he still working with last sample for firmware and anything else to be sure all work well.
And he said he will ship to me late july.
Sorry for this another delay i hope this is last time we get delay.

Thanks!

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: C7Kinetic on Thu, 08 June 2017, 19:36:16
Unfortunate to hear about the delay. But at least that gives me more time to gather parts for the build.

How are things going with the plate manufacturing?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Thu, 08 June 2017, 19:38:21
Unfortunate to hear about the delay. But at least that gives me more time to gather parts for the build.

How are things going with the plate manufacturing?
Plate will be done together with pcb

Sent from my Redmi Note 4 using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ppp on Fri, 09 June 2017, 08:28:54
Is there any updated time estimation?

Any updates on how three pcb build went?

Still expecting to ship this month?

Not possible to ship this month.
Leeku said to me he still working with last sample for firmware and anything else to be sure all work well.
And he said he will ship to me late july.
Sorry for this another delay i hope this is last time we get delay.

Thanks!

Womp. I guess I'll have to go out and buy another keyboard while I wait  :-X
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Fri, 09 June 2017, 08:58:13
Is there any updated time estimation?

Any updates on how three pcb build went?

Still expecting to ship this month?

Not possible to ship this month.
Leeku said to me he still working with last sample for firmware and anything else to be sure all work well.
And he said he will ship to me late july.
Sorry for this another delay i hope this is last time we get delay.

Thanks!

Womp. I guess I'll have to go out and buy another keyboard while I wait  :-X

I'm sorry for this problem :( Actually i want get it fast too but i can't do anything with this delay  :-[
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ppp on Fri, 09 June 2017, 10:13:55
Is there any updated time estimation?

Any updates on how three pcb build went?

Still expecting to ship this month?

Not possible to ship this month.
Leeku said to me he still working with last sample for firmware and anything else to be sure all work well.
And he said he will ship to me late july.
Sorry for this another delay i hope this is last time we get delay.

Thanks!

Womp. I guess I'll have to go out and buy another keyboard while I wait  :-X

I'm sorry for this problem :( Actually i want get it fast too but i can't do anything with this delay  :-[

Haha no I'm not blaming you at all. Of course you want it to quickly  :)

No one said buying more keyboards was a bad thing...  :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Fri, 09 June 2017, 13:43:05
The delay is unfortunate, but I'd rather have it be prefect and late than buggy but on time. That said, once this arrives I'll be ready to assemble it since I have all the other parts now.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: Dystopia on Sat, 10 June 2017, 11:24:11
Would this fit into https://www.massdrop.com/buy/npkc-60-wooden-keyboard-case?mode=guest_open? Thinking of getting that but this is the only 60% I own (or am going to own) right now.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: zacheadams on Sat, 10 June 2017, 13:34:43
Would this fit into https://www.massdrop.com/buy/npkc-60-wooden-keyboard-case?mode=guest_open? Thinking of getting that but this is the only 60% I own (or am going to own) right now.

It should work since the YAS is supposed to be universal 60% mount and the case is the same.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: ChitownM2 on Sat, 10 June 2017, 16:49:22
Would this fit into https://www.massdrop.com/buy/npkc-60-wooden-keyboard-case?mode=guest_open? Thinking of getting that but this is the only 60% I own (or am going to own) right now.

That's not a low profile case so your going to have "holes" at the bottom corners.

Edit: sew photo below
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (ORDER SUBMITTED)
Post by: yasintahir on Sun, 11 June 2017, 21:08:54
Hello guys!
Look what i got from leeku
(http://i.imgur.com/USE0bK7.jpg)

Here's full album http://imgur.com/a/rhy3D  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ChitownM2 on Sun, 11 June 2017, 21:28:05
Looks good. I assume everything is good to go then and pcb production can move forward?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Sun, 11 June 2017, 22:16:04
Looks good. I assume everything is good to go then and pcb production can move forward?
Yep just trivial mistake like missing 6,25 stab hole and 6u switch hole

Sent from my Redmi Note 4 using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: PlastikSchnittstelle on Tue, 13 June 2017, 04:26:10
looks really good!
can you tell the dimensions of the PCB? I'm designing a custom case and I'd like to avoid wasting space. With the exact dimensions I could make it a perfect fit and have the case ready before the PCB arrives.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Tue, 13 June 2017, 08:05:56
On the note of cases, for anyone who doesn't have a case in mind or wants to upgrade to a sick 60% case, there's an IC for this keyboard: https://geekhack.org/index.php?topic=90046.0

The OP says that there will be the option to buy the pieces separately and that there will be an option for different-sized blockers! You guys should hit it up if you're interested :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: child on Wed, 21 June 2017, 16:20:52
Can we get an update about the production? Did it start?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Wed, 21 June 2017, 23:28:59
looks really good!
can you tell the dimensions of the PCB? I'm designing a custom case and I'd like to avoid wasting space. With the exact dimensions I could make it a perfect fit and have the case ready before the PCB arrives.

I still don't get pcb file from leeku.
So i use plate dimension from swillkb to do my project case currently

Can we get an update about the production? Did it start?
Not yet, still fixing last missing hole PCB.
Should be start on first july.

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: PlastikSchnittstelle on Thu, 22 June 2017, 08:31:40
I still don't get pcb file from leeku.
So i use plate dimension from swillkb to do my project case currently

then i assume it has the same dimensions like most other 60% PCBs. GH60 for example is 285x94.5mm - i'll plan with that.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Thu, 22 June 2017, 08:48:01
I still don't get pcb file from leeku.
So i use plate dimension from swillkb to do my project case currently

then i assume it has the same dimensions like most other 60% PCBs. GH60 for example is 285x94.5mm - i'll plan with that.

Yes same as another 60% board for dimensions size and hole position
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: child on Mon, 03 July 2017, 18:25:23


Can we get an update about the production? Did it start?
Not yet, still fixing last missing hole PCB.
Should be start on first july.

Did the production start as planned?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 04 July 2017, 00:00:39


Can we get an update about the production? Did it start?
Not yet, still fixing last missing hole PCB.
Should be start on first july.

Did the production start as planned?

Yes it did.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: child on Tue, 04 July 2017, 01:41:17
 :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: darkslay3r on Tue, 04 July 2017, 02:22:13
manaa yassssss gueeeeeeeeeeeeeeeeeee
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: C7Kinetic on Tue, 04 July 2017, 22:52:29
Can't wait for this to ship! Got my case all ready to go  ;D

(http://i.imgur.com/EPvSwKc.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 04 July 2017, 23:01:47
Can't wait for this to ship! Got my case all ready to go  ;D

Show Image
(http://i.imgur.com/EPvSwKc.jpg)

wow that case look great!
is that polycarbonate for bottom sheet?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: odd on Tue, 04 July 2017, 23:05:28
Can't wait for this to ship! Got my case all ready to go  ;D

Show Image
(http://i.imgur.com/EPvSwKc.jpg)


That looks amazing, where did you get it from?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: C7Kinetic on Tue, 04 July 2017, 23:30:46
Can't wait for this to ship! Got my case all ready to go  ;D

Show Image
(http://i.imgur.com/EPvSwKc.jpg)

wow that case look great!
is that polycarbonate for bottom sheet?

It's an acrylic bottom, translucent to help diffuse underglow

Can't wait for this to ship! Got my case all ready to go  ;D

Show Image
(http://i.imgur.com/EPvSwKc.jpg)


That looks amazing, where did you get it from?

Thanks! The steel plates were cut by Lasergist and the acrylic layers were cut by Ponoko.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 04 July 2017, 23:36:36

It's an acrylic bottom, translucent to help diffuse underglow


Ah ic...
I thought that was polycarbonate because it will be help out to diffuse underglow very well.
But it's hard to find polycarbonate here  :'(
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Wed, 05 July 2017, 07:49:40
Can't wait for this to ship! Got my case all ready to go  ;D

Show Image
(http://i.imgur.com/EPvSwKc.jpg)


huh! That's dope  :) How much did it end up costing ya?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ChitownM2 on Wed, 05 July 2017, 13:00:37
That's a pretty sharp looking case...any chance you'd want to have a small run of them produced?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: C7Kinetic on Wed, 05 July 2017, 16:04:42
huh! That's dope  :) How much did it end up costing ya?

Definitely wasn't cheap. Together, the 3 steel plates (Top, bottom, foot riser) were $150, which included the sandblasted finish and the laser engraving I had done on the bottom plate. The acrylic was about $40. Too much money on a sandwich case? Probably, but I like how it turned out.

That's a pretty sharp looking case...any chance you'd want to have a small run of them produced?

Not likely, but you can easily recreate it or make something similiar using the online swillkb case building tool (it's what I used).
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Fri, 14 July 2017, 11:32:56
Any updates? It should be ready to ship soon, right?  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Fri, 14 July 2017, 17:04:58
Any updates? It should be ready to ship soon, right?  ;D
Sample should be arrived on monday to my home.
All pcb will be shipped end of july  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ChitownM2 on Fri, 14 July 2017, 21:07:48
Any updates? It should be ready to ship soon, right?  ;D
Sample should be arrived on monday to my home.
All pcb will be shipped end of july  ;D

Are the plates completed? I assume they will ship with the pcb?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Fri, 14 July 2017, 21:27:08
Any updates? It should be ready to ship soon, right?  ;D
Sample should be arrived on monday to my home.
All pcb will be shipped end of july  ;D

Are the plates completed? I assume they will ship with the pcb?
Not yet.
Yes that should be finished with pcb end of july too.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: [Lewynlight] on Tue, 18 July 2017, 08:13:41
hiya. i'm selling my spot at cost!

regular PCB with brass plate.
please PM me if someone's interested!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Tue, 18 July 2017, 08:27:49
@silentreader

If you are too busy to run a design and group-buy for a CNC case for this PCB & Plate.
Can you represent us to send a request to Kbdfans.cn to convince them to have a limited run (say for 75% of us in this group-buy) of a top that fits our 0.75u-on-both-sides layout, instead of their usual TINA-A, TINA-B, TINA-C ?

https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60 (https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60)

I can imagine I will already be quite happy about that TINA 60% design if they can accommodate the YAS62 layout.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Tue, 18 July 2017, 08:31:08
@silentreader

If you are too busy to run a design and group-buy for a CNC case for this PCB & Plate.
Can you represent us to send a request to Kbdfans.cn to convince them to have a limited run (say for 75% of us in this group-buy) of a top that fits our 0.75u-on-both-sides layout, instead of their usual TINA-A, TINA-B, TINA-C ?

https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60 (https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60)

I can imagine I will already be quite happy about that TINA 60% design if they can accommodate the YAS62 layout.

+1!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 18 July 2017, 09:02:32
@silentreader

If you are too busy to run a design and group-buy for a CNC case for this PCB & Plate.
Can you represent us to send a request to Kbdfans.cn to convince them to have a limited run (say for 75% of us in this group-buy) of a top that fits our 0.75u-on-both-sides layout, instead of their usual TINA-A, TINA-B, TINA-C ?

https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60 (https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60)

I can imagine I will already be quite happy about that TINA 60% design if they can accommodate the YAS62 layout.

@silentreader

If you are too busy to run a design and group-buy for a CNC case for this PCB & Plate.
Can you represent us to send a request to Kbdfans.cn to convince them to have a limited run (say for 75% of us in this group-buy) of a top that fits our 0.75u-on-both-sides layout, instead of their usual TINA-A, TINA-B, TINA-C ?

https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60 (https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60)

I can imagine I will already be quite happy about that TINA 60% design if they can accommodate the YAS62 layout.

+1!

Sure! I'm ok if anyone want make custom case to fit YAS62 layout
I'm not sure doing cases right now because my vendor for cnc still in production for N-Bullet 40% case
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Wed, 19 July 2017, 04:23:43
@silentreader

If you are too busy to run a design and group-buy for a CNC case for this PCB & Plate.
Can you represent us to send a request to Kbdfans.cn to convince them to have a limited run (say for 75% of us in this group-buy) of a top that fits our 0.75u-on-both-sides layout, instead of their usual TINA-A, TINA-B, TINA-C ?

https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60 (https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60)

I can imagine I will already be quite happy about that TINA 60% design if they can accommodate the YAS62 layout.

+1!

Sure! I'm ok if anyone want make custom case to fit YAS62 layout
I'm not sure doing cases right now because my vendor for cnc still in production for N-Bullet 40% case

I sent an e-mail to Kbdfans.cn asking for the MOQ and price of a custom case (of TINA 60% design but a custom top piece to fit YAS62).
I told them I estimate that there can be from 30-50 orders, given they price it at their current rate - $110 for case only option.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Wed, 19 July 2017, 08:28:09
@silentreader

If you are too busy to run a design and group-buy for a CNC case for this PCB & Plate.
Can you represent us to send a request to Kbdfans.cn to convince them to have a limited run (say for 75% of us in this group-buy) of a top that fits our 0.75u-on-both-sides layout, instead of their usual TINA-A, TINA-B, TINA-C ?

https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60 (https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60)

I can imagine I will already be quite happy about that TINA 60% design if they can accommodate the YAS62 layout.

+1!

Sure! I'm ok if anyone want make custom case to fit YAS62 layout
I'm not sure doing cases right now because my vendor for cnc still in production for N-Bullet 40% case

I sent an e-mail to Kbdfans.cn asking for the MOQ and price of a custom case (of TINA 60% design but a custom top piece to fit YAS62).
I told them I estimate that there can be from 30-50 orders, given they price it at their current rate - $110 for case only option.

sick. I'd be in. Are we going to keep it in this thread then or make a new one?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Wed, 19 July 2017, 08:46:31
I sent an e-mail to Kbdfans.cn asking for the MOQ and price of a custom case (of TINA 60% design but a custom top piece to fit YAS62).
I told them I estimate that there can be from 30-50 orders, given they price it at their current rate - $110 for case only option.

sick. I'd be in. Are we going to keep it in this thread then or make a new one?

That's was good price
I think would be great if you guys post IC both here and new thread.
That will make everyone join this PCB wouldn't missed that one.
But i will not handle for that IC case.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ideus on Wed, 19 July 2017, 22:15:23
Can't wait for this to ship! Got my case all ready to go  ;D

Show Image
(http://i.imgur.com/EPvSwKc.jpg)


Nice case, it just needs a heart.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Thu, 20 July 2017, 22:53:52
I sent an e-mail to Kbdfans.cn asking for the MOQ and price of a custom case (of TINA 60% design but a custom top piece to fit YAS62).
I told them I estimate that there can be from 30-50 orders, given they price it at their current rate - $110 for case only option.

sick. I'd be in. Are we going to keep it in this thread then or make a new one?

That's was good price
I think would be great if you guys post IC both here and new thread.
That will make everyone join this PCB wouldn't missed that one.
But i will not handle for that IC case.






Good news!
KBDfans replied me, did not need me to have a MOQ, and said that they are willing to create a customized TINA 60% case for the YAS62 kit, i.e. with 0.75u blockers. I told them the estimated is 20-50 orders. They even give me a discount so that the case will only be $85 (USD) before shipping cost and PayPal fee.

I will post and Interest-Check really soon over the weekend to gather information for the order.

Reference: https://kbdfans.cn/collections/keyboard/products/tina-keyboard-60


Edit: here is the link to the Interest-Check post
https://geekhack.org/index.php?topic=90686.0 (https://geekhack.org/index.php?topic=90686.0)


Deadline: August 7th, i.e the list will be wrapped up in 2 weeks time.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Tue, 25 July 2017, 08:27:00
@silentreader

any last updates? Are we going to get tracking numbers soon?  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: zacheadams on Thu, 27 July 2017, 09:49:34
@silentreader

any last updates? Are we going to get tracking numbers soon?  ;D

I hope, *fingers crossed*  :-[
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Thu, 27 July 2017, 09:53:32
@silentreader

any last updates? Are we going to get tracking numbers soon?  ;D

I hope, *fingers crossed*  :-[

Not yet guys  :(
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Fri, 28 July 2017, 14:01:42
@silentreader

any last updates? Are we going to get tracking numbers soon?  ;D

I hope, *fingers crossed*  :-[

Not yet guys  :(

:(
All those bananasplit guys makin me jelly. They are starting to ship ;__;
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Mon, 31 July 2017, 09:39:25
Last day until July's over :(

Any last second updates?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Mon, 31 July 2017, 09:51:49
I feel ashamed to tell you guys that we have another delay.
I received pcb sample on 21 july from leeku and i found mistake:
1. Missing left hole stabilizer for 6.25u spacebar
2. Missing offstem switch hole for 6u spacebar
3. Split spacebar position flipped

I told to leeku about this problem and he has been fixed it.
But he said it can't be done this month because he has been really busy with his primary job in korea.
Like he said on 75SQ thread he is have personal plan at september so last August is final time he will finsih all his job for PCB.

I'm really sorry for this many delay :(
Thanks for your patience
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Mon, 31 July 2017, 10:19:30
I feel ashamed to tell you guys that we have another delay.
I received pcb sample on 21 july from leeku and i found mistake:
1. Missing left hole stabilizer for 6.25u spacebar
2. Missing offstem switch hole for 6u spacebar
3. Split spacebar position flipped

I told to leeku about this problem and he has been fixed it.
But he said it can't be done this month because he has been really busy with his primary job in korea.
Like he said on 75SQ thread he is have personal plan at september so last August is final time he will finsih all his job for PCB.

I'm really sorry for this many delay :(
Thanks for your patience

It's the most important thing to get everything right.
I am of course eager to build my YA62 but I will be patient to wait for all corrections been done.

Thanks Silentreader for all the hard work and the update.
So I hope in late August / early September to hear from you about your communication with Leeku on the project.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Mon, 31 July 2017, 11:08:39
I feel ashamed to tell you guys that we have another delay.
I received pcb sample on 21 july from leeku and i found mistake:
1. Missing left hole stabilizer for 6.25u spacebar
2. Missing offstem switch hole for 6u spacebar
3. Split spacebar position flipped

I told to leeku about this problem and he has been fixed it.
But he said it can't be done this month because he has been really busy with his primary job in korea.
Like he said on 75SQ thread he is have personal plan at september so last August is final time he will finsih all his job for PCB.

I'm really sorry for this many delay :(
Thanks for your patience

It's the most important thing to get everything right.
I am of course eager to build my YA62 but I will be patient to wait for all corrections been done.

Thanks Silentreader for all the hard work and the update.
So I hope in late August / early September to hear from you about your communication with Leeku on the project.

Ahh yeah that sucks but I agree. I'd rather have a perfect PCB come in than get a messed up one and have to keep sending it back and forth.
Guess I'll go buy some other keyboards while I wait XD

See you at the end of August I guess :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Che.R.Ry on Mon, 31 July 2017, 11:42:37
I feel ashamed to tell you guys that we have another delay.
I received pcb sample on 21 july from leeku and i found mistake:
1. Missing left hole stabilizer for 6.25u spacebar
2. Missing offstem switch hole for 6u spacebar
3. Split spacebar position flipped

I told to leeku about this problem and he has been fixed it.
But he said it can't be done this month because he has been really busy with his primary job in korea.
Like he said on 75SQ thread he is have personal plan at september so last August is final time he will finsih all his job for PCB.

I'm really sorry for this many delay :(
Thanks for your patience

Its okay silentreader, keep us informed
Thx for running this GB!  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Dystopia on Tue, 01 August 2017, 02:11:24
On the bright side, at least I have a longer time to save $$$ to get a proper case since I basically blew all my money on the Moon...
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ideus on Thu, 03 August 2017, 17:32:25
Wrong post, sorry.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: PlastikSchnittstelle on Sat, 05 August 2017, 07:06:00
no hurry. it's more important to thoroughly check for mistakes.

just to clarify, centered and off-centered 6U spacebars are supported, right?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Sat, 05 August 2017, 08:54:28
Thanks for all your patience guys.
I'm really appreciate that!

Here's i have picture of sample i build last week with flipped split spacebar position.
Stabilizer still fit perfectly in universal plate.
(http://i.imgur.com/SSRUoeT.jpg)
(http://i.imgur.com/ryLeXla.jpg)
(http://i.imgur.com/jFs3xyR.jpg)
(http://i.imgur.com/TpVEcGs.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Sat, 05 August 2017, 08:57:20
no hurry. it's more important to thoroughly check for mistakes.

just to clarify, centered and off-centered 6U spacebars are supported, right?

Yes it will supported both off-centered and centered stem
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: PlastikSchnittstelle on Mon, 07 August 2017, 12:27:44
2. Missing offstem switch hole for 6u spacebar

i want to finalize the cad data for my plate. i laid your pcb picture under my data to check. you can see the missing hole for the off-center-stem 6U spacebar. but you got that, like you already wrote, right? sorry, i just wanna be 100% sure :)

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Mon, 07 August 2017, 17:03:42
2. Missing offstem switch hole for 6u spacebar

i want to finalize the cad data for my plate. i laid your pcb picture under my data to check. you can see the missing hole for the off-center-stem 6U spacebar. but you got that, like you already wrote, right? sorry, i just wanna be 100% sure :)

Yes! It has been fixed already
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: PlastikSchnittstelle on Tue, 08 August 2017, 07:48:04
thanks very much.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: JDragon on Tue, 08 August 2017, 16:17:27
Anyone have an extra they're wanting to get rid of, or want to sell their spot by any chance?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: zacheadams on Tue, 08 August 2017, 22:38:41
Anyone have an extra they're wanting to get rid of, or want to sell their spot by any chance?

PM'd
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Wed, 09 August 2017, 10:18:52
That's was good price
I think would be great if you guys post IC both here and new thread.
That will make everyone join this PCB wouldn't missed that one.
But i will not handle for that IC case.

Edit: here is the link to the Interest-Check post
https://geekhack.org/index.php?topic=90686.0 (https://geekhack.org/index.php?topic=90686.0)


Deadline: August 7th, i.e the list will be wrapped up in 2 weeks time.

A mini report on KBDfan's custom-made TINA case for YAS62:
A total of 30 signed up and KBDfan will send out 29 PayPal invoices for a total of 37 keyboard cases specially made for YAS62.

I also ask Wei from KBDfans to contact silentreader in case there are technical specs that he needs to know, for the moment, the render was made from having 0.75u blockers at the bottom corners.
Just in case you need to know more about the order *AFTER* an invoice has been sent to you and you have paid,
More
here is Wei's contact:
wei@kbdfans.cn

Please wait for a week or so to allow all the invoices to be sent out.
(On top of the $85, shipping charge varies according to where you live.)


And of course, the most important thing for us is to have the YAS62 kit completed in a correct way and sent to us!  :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Wed, 09 August 2017, 10:25:53
Please make it happen so that I have a YAS62 with me when winter is coming.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: dyoungc on Wed, 09 August 2017, 10:50:36
That's was good price
I think would be great if you guys post IC both here and new thread.
That will make everyone join this PCB wouldn't missed that one.
But i will not handle for that IC case.

Edit: here is the link to the Interest-Check post
https://geekhack.org/index.php?topic=90686.0 (https://geekhack.org/index.php?topic=90686.0)


Deadline: August 7th, i.e the list will be wrapped up in 2 weeks time.

A mini report on KBDfan's custom-made TINA case for YAS62:
A total of 30 signed up and KBDfan will send out 29 PayPal invoices for a total of 37 keyboard cases specially made for YAS62.

I also ask Wei from KBDfans to contact silentreader in case there are technical specs that he needs to know, for the moment, the render was made from having 0.75u blockers at the bottom corners.
Just in case you need to know more about the order *AFTER* an invoice has been sent to you and you have paid,
More
here is Wei's contact:
wei@kbdfans.cn

Please wait for a week or so to allow all the invoices to be sent out.
(On top of the $85, shipping charge varies according to where you live.)


And of course, the most important thing for us is to have the YAS62 kit completed in a correct way and sent to us! 
Is it possible to get a preliminary sample for quality check and fitting with the pcb before the main production? If there there are 50 units all with the same error, that's a huge pool of money to be wasted on a incompatible or damaged case.

Sent from my SM-G955U using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Wed, 09 August 2017, 11:04:16
Is it possible to get a preliminary sample for quality check and fitting with the pcb before the main production? If there there are 50 units all with the same error, that's a huge pool of money to be wasted on a incompatible or damaged case.

Sent from my SM-G955U using Tapatalk

I agree with you, but this is not within my scope of ability.

I asked Wei to contact Silentreader if possible. And given TINA 60% is also KBDfan's new production, they have been working on that since the beginning of this year. So if YAS62 PCB and plate can fit in all regular 60% case like other 60% PCB and plates in the market, then there should not be a problem.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Wed, 09 August 2017, 17:29:37
Is it possible to get a preliminary sample for quality check and fitting with the pcb before the main production? If there there are 50 units all with the same error, that's a huge pool of money to be wasted on a incompatible or damaged case.

Sent from my SM-G955U using Tapatalk




I agree with you, but this is not within my scope of ability.

I asked Wei to contact Silentreader if possible. And given TINA 60% is also KBDfan's new production, they have been working on that since the beginning of this year. So if YAS62 PCB and plate can fit in all regular 60% case like other 60% PCB and plates in the market, then there should not be a problem.

Agreed! I think PCB it self would be fit for TINA case but our concern is blocker YAS62.
I will try contact wei if he can send / lend me sample YAS62 to make sure it perfectly fit.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ChitownM2 on Wed, 09 August 2017, 19:25:26
Is it possible to get a preliminary sample for quality check and fitting with the pcb before the main production? If there there are 50 units all with the same error, that's a huge pool of money to be wasted on a incompatible or damaged case.

Sent from my SM-G955U using Tapatalk

I agree with you, but this is not within my scope of ability.

I asked Wei to contact Silentreader if possible. And given TINA 60% is also KBDfan's new production, they have been working on that since the beginning of this year. So if YAS62 PCB and plate can fit in all regular 60% case like other 60% PCB and plates in the market, then there should not be a problem.

Did kbdfans provide an answer regarding whether we can get a different tina case along with the tina-yas62 version? I read that it was confirmed you can't buy just a tina a, b, or c  but the issue of getting one along with the special version still hasn't been answered.

Also, please unlock car thread as it is the defacto GB thread for the case. Best to keep case discussions separate since the two bus are completely independent transactions run by different parties. 
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: DuFF on Sat, 12 August 2017, 15:32:44
anyone already got an invoice for the TINA 60% case?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Sat, 12 August 2017, 15:47:57
anyone already got an invoice for the TINA 60% case?

No, I didn't. I will send an e-mail to Wei next week in case he has not sent out any invoice yet.

Edit: KBDfans interacts directly with their customers about the progress of their TINA 60% case on this thread on r/mm
https://www.reddit.com/r/mechmarket/comments/6kxofu/gb_tina_keyboard_60_kit/?st=J6ADWDNM&sh=767731df
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: teamrushpntball on Mon, 14 August 2017, 17:09:06
Any updates to the timeline? 
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: dyoungc on Sun, 20 August 2017, 10:25:26
Hey Silent,
Can I request a change of shipping method and address? It was originally domestic shipping in korea, but I would like to ship internationally to USA. Im returning to the states tomorrow and due to the delay, the pcb will arrive after I leave.
It we can change, please send me your email so we can discuss details.

Sent from my SM-G955U using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: gr4v3m4n on Tue, 22 August 2017, 00:14:46
hows the update for the tina case? theres no update also on kbd's reddit page.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 22 August 2017, 00:41:52
Any updates to the timeline? 

Factory told they are waiting a part of ICs to solder..

Hey Silent,
Can I request a change of shipping method and address? It was originally domestic shipping in korea, but I would like to ship internationally to USA. Im returning to the states tomorrow and due to the delay, the pcb will arrive after I leave.
It we can change, please send me your email so we can discuss details.

Sent from my SM-G955U using Tapatalk



Sure! here's my email address yasintahir_@live.com.
Or should i send you invoice for shipping? i'm still not charge your shipping before right?

hows the update for the tina case? theres no update also on kbd's reddit page.

Wei from KBDfans contacted me last week to get measurement of blocker YAS62.
And he is currently work on sample right now. He said he well contact me again after finish with his sample.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: child on Mon, 28 August 2017, 01:26:53
Any updates to the timeline? 

Factory told they are waiting a part of ICs to solder..

Do you know if they were able to overcome that?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Tue, 29 August 2017, 18:00:46
Ano Rush, but are there any updates on this? =)

Also, does anyone know what happens to the Tina 60 yas cases?
I was on the form for 3 boards but haven't received an invoice...
Really hoping I didn't miss out O_O
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Wed, 30 August 2017, 03:57:35
Do you know if they were able to overcome that?

Ano Rush, but are there any updates on this? =)

Also, does anyone know what happens to the Tina 60 yas cases?
I was on the form for 3 boards but haven't received an invoice...
Really hoping I didn't miss out O_O

Now we are wait firmware downloaded to MCU.

For case i still don't get any information again about sample from wei KBDfans

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Wed, 30 August 2017, 10:46:21
Do you know if they were able to overcome that?

Ano Rush, but are there any updates on this? =)

Also, does anyone know what happens to the Tina 60 yas cases?
I was on the form for 3 boards but haven't received an invoice...
Really hoping I didn't miss out O_O

Now we are wait firmware downloaded to MCU.

For case i still don't get any information again about sample from wei KBDfans

Wei e-mailed me yesterday about the preparation of invoices that he is going to send out. Of course, he will confirm the sample case to fit with Silentreader first.
Everything is getting there, slowly but surely.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ChitownM2 on Wed, 30 August 2017, 12:32:33
Do you know if they were able to overcome that?

Ano Rush, but are there any updates on this? =)

Also, does anyone know what happens to the Tina 60 yas cases?
I was on the form for 3 boards but haven't received an invoice...
Really hoping I didn't miss out O_O

Now we are wait firmware downloaded to MCU.

For case i still don't get any information again about sample from wei KBDfans

Wei e-mailed me yesterday about the preparation of invoices that he is going to send out. Of course, he will confirm the sample case to fit with Silentreader first.
Everything is getting there, slowly but surely.

Did they ever give an answer regarding the ability to buy a Tina B or other case as part of the same transaction? I posted the question on the reddit thread linked above but no one ever responded.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Wed, 30 August 2017, 12:43:09
I just know that initially KBDfans quickly wanted to increase the price of the case of this GB back to > $100 or even > $120.
And I didn't ask further if more cases can be ordered also in such a discounted price.

This may be responded via the invoice - you may be allowed to pay for 1 more case in such a good price; if not, you can also reply via the PayPal e-mail address about your unanswered question.

AFAIK, none of the members in this list ordering for the special production has ever received an invoice yet, as Silentreader and Wei are still working on the confirmation of case dimensions.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Fri, 01 September 2017, 11:01:46
Do you know if they were able to overcome that?

Ano Rush, but are there any updates on this? =)

Also, does anyone know what happens to the Tina 60 yas cases?
I was on the form for 3 boards but haven't received an invoice...
Really hoping I didn't miss out O_O

Now we are wait firmware downloaded to MCU.

For case i still don't get any information again about sample from wei KBDfans

So what does this mean in terms of timeline of when it gets shipped out? Do you have an estimate of when?  Thanks :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Mon, 04 September 2017, 22:53:18
News Update:

- PCB and plate didn't shipped yet to leeku form factory (Leeku said 15 sept deadline factory ship it to him)
- I'm no longer have proxy in Korea so i need to ship it first to Indonesia before ship it to you
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: JDragon on Wed, 06 September 2017, 16:45:08
KBDfans posted on their blog that the case sample is ready :)

https://kbdfans.cn/blogs/news/ys62-tina-case-update
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Che.R.Ry on Wed, 06 September 2017, 20:29:02
KBDfans posted on their blog that the case sample is ready :)

https://kbdfans.cn/blogs/news/ys62-tina-case-update
wooooo hype is real  :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Fri, 08 September 2017, 12:09:06
KBDfans posted on their blog that the case sample is ready :)

https://kbdfans.cn/blogs/news/ys62-tina-case-update

Ahh yiss!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Tue, 12 September 2017, 08:57:21
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 12 September 2017, 09:08:12
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!
As leeku said 15 sept deadline factory send out pcb to him. I think this pcb will be shipped to me on October.

For shipping address i'll collect again when leeku ship all pcb to me

Sent from my Redmi Note 4 using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Tue, 12 September 2017, 13:08:59
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!
As leeku said 15 sept deadline factory send out pcb to him. I think this pcb will be shipped to me on October.

For shipping address i'll collect again when leeku ship all pcb to me

Sent from my Redmi Note 4 using Tapatalk

Sick. Thanks! In that case, hit me up with a PM when you get the pcbs, I'll definitely be moved out by then. Still excited  ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Wed, 13 September 2017, 06:58:29
Soo..

Any last updates/timeframes? I might actually be moving soon (didn't expect this gb to go this long tbh haha) and I might have to change my address on my shipping order if it turns out production will take a bit longer. Thanks!
As leeku said 15 sept deadline factory send out pcb to him. I think this pcb will be shipped to me on October.

For shipping address i'll collect again when leeku ship all pcb to me

Sent from my Redmi Note 4 using Tapatalk

Then that means the dimensions and fitting of TINA-YAS62 case will be examined in mid-to-late October 2017.
I am glad that both Silentreader and Wei are trying to be very careful in the productions for this run.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Thu, 21 September 2017, 11:14:08
possible for an update? hopefully the pcb's turned out ok!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 26 September 2017, 07:43:54
News update :

- PCB will be arrived to leeku early next week
- But for plate it will come at mid october :(

When PCB arrived to leeku i will ask him to send 1 pcs PCB to wei from KBDfans to check it's fit with his TINA Case.
I hope when all PCB + Plate shipped to you TINA case done too so it will not take too much time PCB and case came along.

I really appreciate your patience.
Seems like it's bad lead times for my first group buy.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Tue, 26 September 2017, 09:37:28
News update :

- PCB will be arrived to leeku early next week
- But for plate it will come at mid october :(

When PCB arrived to leeku i will ask him to send 1 pcs PCB to wei from KBDfans to check it's fit with his TINA Case.
I hope when all PCB + Plate shipped to you TINA case done too so it will not take too much time PCB and case came along.

I really appreciate your patience.
Seems like it's bad lead times for my first group buy.


No worries Silent!

I've been waiting for this layout even longer before the gb.
Finally getting arrowed 60 PCBs and matching case is well worth the wait.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: arninja21 on Thu, 28 September 2017, 07:12:11
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: gr4v3m4n on Thu, 28 September 2017, 07:33:07
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Che.R.Ry on Thu, 28 September 2017, 09:15:21
News update :

- PCB will be arrived to leeku early next week
- But for plate it will come at mid october :(

When PCB arrived to leeku i will ask him to send 1 pcs PCB to wei from KBDfans to check it's fit with his TINA Case.
I hope when all PCB + Plate shipped to you TINA case done too so it will not take too much time PCB and case came along.

I really appreciate your patience.
Seems like it's bad lead times for my first group buy.

Its okay silentreader, sometimes things can go out of control ;D
And i just wanna ask some silly question since im quite new to this custom keyboard thing
"Do we need to fit the plate too?" since it will have some kind of thickness inside the case along with the PCB


Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

that design look sick  :eek:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: DasGnome on Thu, 28 September 2017, 09:20:59
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?

Looks like they are going back on their word from the interest check. That sucks.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Thu, 28 September 2017, 09:22:05
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

do we know when this is going to close? I don't want to spend too much money at once lol
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Thu, 28 September 2017, 09:37:37

Its okay silentreader, sometimes things can go out of control ;D
And i just wanna ask some silly question since im quite new to this custom keyboard thing
"Do we need to fit the plate too?" since it will have some kind of thickness inside the case along with the PCB


Not sure, but i think it will be fit.
And leeku send PCB prototype to kbdfans tommorow so we will see it will be fit or not.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Che.R.Ry on Thu, 28 September 2017, 09:57:45
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?

Looks like they are going back on their word from the interest check. That sucks.

Yap looks like it, but menuhin already mentioned about that issue on older post here -->
I know, it sucks but I think there's nothing we can do about it :(

I just know that initially KBDfans quickly wanted to increase the price of the case of this GB back to > $100 or even > $120.
And I didn't ask further if more cases can be ordered also in such a discounted price.

This may be responded via the invoice - you may be allowed to pay for 1 more case in such a good price; if not, you can also reply via the PayPal e-mail address about your unanswered question.

AFAIK, none of the members in this list ordering for the special production has ever received an invoice yet, as Silentreader and Wei are still working on the confirmation of case dimensions.
---------------------------------------------------------------------------------------------------------

Its okay silentreader, sometimes things can go out of control ;D
And i just wanna ask some silly question since im quite new to this custom keyboard thing
"Do we need to fit the plate too?" since it will have some kind of thickness inside the case along with the PCB


Not sure, but i think it will be fit.
And leeku send PCB prototype to kbdfans tommorow so we will see it will be fit or not.

ok then, keep us informed ;)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: gr4v3m4n on Thu, 28 September 2017, 12:21:02
Just saw in kbdfans website

Your case are ready for purchase!

https://kbdfans.myshopify.com/products/yas62-keyboard-case?variant=45016700493

whattt!!! why did he send any invoice? we have to buy from his site?

Looks like they are going back on their word from the interest check. That sucks.

Yap looks like it, but menuhin already mentioned about that issue on older post here -->
I know, it sucks but I think there's nothing we can do about it :(

I just know that initially KBDfans quickly wanted to increase the price of the case of this GB back to > $100 or even > $120.
And I didn't ask further if more cases can be ordered also in such a discounted price.

This may be responded via the invoice - you may be allowed to pay for 1 more case in such a good price; if not, you can also reply via the PayPal e-mail address about your unanswered question.

AFAIK, none of the members in this list ordering for the special production has ever received an invoice yet, as Silentreader and Wei are still working on the confirmation of case dimensions.

yeah its sucks i even replied to his email wanting black colour and theres no black  :-\
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Thu, 28 September 2017, 14:02:28
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Thu, 28 September 2017, 14:55:01
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo

Well, I have no control over KBDfans final pricing and their marketing / branding strategy, despite all my effort spent on collecting e-mails and comments and orders.

Perhaps it's good to think positively that a case design tailor-made for the kit is available at the same time it is going to arrive our home.

For the black color request, I think you can send KBDfans' people with a request message or a comment. They have so many Alu-anodized cases produced and added a few black YAS62-TINA cases to their black anodizing bath won't be a big problem, I believe.
Title: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Thu, 28 September 2017, 19:18:41
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo

Well, I have no control over KBDfans final pricing and their marketing / branding strategy, despite all my effort spent on collecting e-mails and comments and orders.

Perhaps it's good to think positively that a case design tailor-made for the kit is available at the same time it is going to arrive our home.

For the black color request, I think you can send KBDfans' people with a request message or a comment. They have so many Alu-anodized cases produced and added a few black YAS62-TINA cases to their black anodizing bath won't be a big problem, I believe.


I didn't mean to sound that negative menuhin, after rereading my post it came of less positive then intended.

What I was trying to say is, of course the lower price would have been even better, but 120 is still very reasonable.

I love the YAS62 layout and I am more then glad to be able to get a quality case tailor made for this. <3


What bothered me was the black situation, but I'll definitely reach out to ask them =)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: DasGnome on Fri, 29 September 2017, 07:30:57
I inquired to Wei about the price increase, and here's what he said: 

"hi
this price include shipping and paypal fee  You can order directly from my website, sample PCB is expected to arrive in a week, and when I test no problem, I can ship the goods"

Seems reasonable enough to me for a custom case.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Fri, 29 September 2017, 09:16:16
I inquired to Wei about the price increase, and here's what he said: 

"hi
this price include shipping and paypal fee  You can order directly from my website, sample PCB is expected to arrive in a week, and when I test no problem, I can ship the goods"

Seems reasonable enough to me for a custom case.

That's true. 90$ shipped from China to CONUS/EU would've been nuts price.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Che.R.Ry on Fri, 29 September 2017, 12:58:26
Whaaat no Black? O_O

Price increase sucks, but tbh 120 is still a very reasonable price for these imo.

What really sucks is that black is not available imo

Well, I have no control over KBDfans final pricing and their marketing / branding strategy, despite all my effort spent on collecting e-mails and comments and orders.

Perhaps it's good to think positively that a case design tailor-made for the kit is available at the same time it is going to arrive our home.

For the black color request, I think you can send KBDfans' people with a request message or a comment. They have so many Alu-anodized cases produced and added a few black YAS62-TINA cases to their black anodizing bath won't be a big problem, I believe.

no problem menuhin, u did the best u can ;)
props to silentreader and menuhin :thumb:
the price is still reasonable with included shipping and paypal fees :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Tue, 03 October 2017, 09:05:32
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Tue, 03 October 2017, 09:07:44
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

I just emailed him. Hopefully he brings some good news!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Wed, 04 October 2017, 02:48:59
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

Wow, haven't seen this one before.

However, this looks to be a one part tray case.

On a one part case it will be difficult to impossible to machine blockers with room below for the plate/pcb.

Also it would be difficult to insert the pcb/plate into the case.


To make this work, both pcb & plate would need to have cutouts so they don't extend below the blockers.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Wed, 04 October 2017, 08:32:34
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

Wow, haven't seen this one before.

However, this looks to be a one part tray case.

On a one part case it will be difficult to impossible to machine blockers with room below for the plate/pcb.

Also it would be difficult to insert the pcb/plate into the case.


To make this work, both pcb & plate would need to have cutouts so they don't extend below the blockers.

Upon further inspection it would seem that you're right. Wei suggested that since he has screw-on blockers, that we would just need screw holes in the plate/pcb. I'm fine with doing it myself on the plate but the pcb I'm more worried about...
I just think aesthetic-wise it looks nicer than the TINA. Though honestly the more I think about it, I might just commission out/try to make my own wood case...
Title: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Wed, 04 October 2017, 18:55:06
wait so I just ordered tina for the yas62 but I was wondering if we could get a yas62 version of his new 5degree 60% case...

https://kbdfans.myshopify.com/products/pre-orderkbdfans-5-60-case

Wow, haven't seen this one before.

However, this looks to be a one part tray case.

On a one part case it will be difficult to impossible to machine blockers with room below for the plate/pcb.

Also it would be difficult to insert the pcb/plate into the case.


To make this work, both pcb & plate would need to have cutouts so they don't extend below the blockers.

Upon further inspection it would seem that you're right. Wei suggested that since he has screw-on blockers, that we would just need screw holes in the plate/pcb. I'm fine with doing it myself on the plate but the pcb I'm more worried about...
I just think aesthetic-wise it looks nicer than the TINA. Though honestly the more I think about it, I might just commission out/try to make my own wood case...

I've made wooden cases before using a router on a custom jig.

It's not that difficult and I can give you a rundown/some pics if you are interested. =)

Edit: old pics I found on my mobile but you get the idea
https://imgur.com/gallery/L0R9M (https://imgur.com/gallery/L0R9M)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: ppp on Thu, 05 October 2017, 09:10:42
I've made wooden cases before using a router on a custom jig.

It's not that difficult and I can give you a rundown/some pics if you are interested. =)

Edit: old pics I found on my mobile but you get the idea
https://imgur.com/gallery/L0R9M (https://imgur.com/gallery/L0R9M)

I might take you up on that!

On another note though, I have talked to wei again and he said he might be able to find some good adhesives to connect the blockers to the side of the case after installing the pcb/plate thus making it so that there would be space for everything without having to cut or drill anything.
I have seriously fell in love with the 5degrees aesthetics so hopefully this works out!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: pratamawijaya on Wed, 18 October 2017, 23:39:35
any update guys ?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Fri, 20 October 2017, 06:23:05
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

(https://i.imgur.com/ftZ1L7m.jpg)

(https://i.imgur.com/MhAT1YI.jpg)

(https://i.imgur.com/ph9wam7.jpg)

(https://i.imgur.com/qDkKqNe.jpg)

(https://i.imgur.com/OTgeZRo.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Puddsy on Fri, 20 October 2017, 13:24:30
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image
(https://i.imgur.com/ftZ1L7m.jpg)


Show Image
(https://i.imgur.com/MhAT1YI.jpg)


Show Image
(https://i.imgur.com/ph9wam7.jpg)


Show Image
(https://i.imgur.com/qDkKqNe.jpg)


Show Image
(https://i.imgur.com/OTgeZRo.jpg)


That's ****ing cool
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Fri, 20 October 2017, 15:41:56
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image
(https://i.imgur.com/ftZ1L7m.jpg)


Show Image
(https://i.imgur.com/MhAT1YI.jpg)


Show Image
(https://i.imgur.com/ph9wam7.jpg)


Show Image
(https://i.imgur.com/qDkKqNe.jpg)


Show Image
(https://i.imgur.com/OTgeZRo.jpg)


That's ****ing cool

Dat pcb, so smexy O_O

Case looks great too! Still gotta message KBDfans for a black one =)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: C7Kinetic on Fri, 20 October 2017, 20:16:57
Is leeku also getting the plates next week, or are we still waiting for those to be finished?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Sat, 21 October 2017, 00:41:44
Is leeku also getting the plates next week, or are we still waiting for those to be finished?

Seems like it will be arrived to leeku next week.
Production has been finsihing left.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Sat, 21 October 2017, 01:35:09
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image
(https://i.imgur.com/ftZ1L7m.jpg)


Show Image
(https://i.imgur.com/MhAT1YI.jpg)


Show Image
(https://i.imgur.com/ph9wam7.jpg)


Show Image
(https://i.imgur.com/qDkKqNe.jpg)


Show Image
(https://i.imgur.com/OTgeZRo.jpg)


That's ****ing cool

Dat pcb, so smexy O_O

Case looks great too! Still gotta message KBDfans for a black one =)

I think you need to reanodized it self.
I have that plan if my purple one not darker enough lol.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: FoC_Tow on Sat, 21 October 2017, 09:52:30
Someone suggested to just ask if  it's possible to get a black case, as it shouldn't cause too much trouble to send one on the production chain for black anodizing.

I'm just going to give it a shot and see if it's possible to get a black one =)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: Che.R.Ry on Sun, 22 October 2017, 13:35:16
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image
(https://i.imgur.com/ftZ1L7m.jpg)


Show Image
(https://i.imgur.com/MhAT1YI.jpg)


Show Image
(https://i.imgur.com/ph9wam7.jpg)


Show Image
(https://i.imgur.com/qDkKqNe.jpg)


Show Image
(https://i.imgur.com/OTgeZRo.jpg)


homina homina homina :p
looks great :-*

Someone suggested to just ask if  it's possible to get a black case, as it shouldn't cause too much trouble to send one on the production chain for black anodizing.

I'm just going to give it a shot and see if it's possible to get a black one =)

yeah i wish kbdfans can give us more colour choice, giving "normal" colour option wont cost them that much i think
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: yasintahir on Tue, 31 October 2017, 09:18:33
Small update :
PCB currently in progress to soldering USB connector and QC by leeku and it will be shiped to me this week.
For cases my case from KBDFans still stuck on custom clearence since 22 october and this is suck  :mad:

I have some picture for PCBs

(https://i.imgur.com/coJhPQ6.jpg)
(https://i.imgur.com/LEPErO7.jpg)
(https://i.imgur.com/FNh2efK.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Tue, 31 October 2017, 09:50:20
[GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
>FINISHING

HYPEHYPEHYPEHYPEHYPEHYPEHYPEHYPE
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Che.R.Ry on Tue, 31 October 2017, 13:02:00
Small update :
PCB currently in progress to soldering USB connector and QC by leeku and it will be shiped to me this week.
For cases my case from KBDFans still stuck on custom clearence since 22 october and this is suck  :mad:

I have some picture for PCBs

Show Image
(https://i.imgur.com/coJhPQ6.jpg)

Show Image
(https://i.imgur.com/LEPErO7.jpg)

Show Image
(https://i.imgur.com/FNh2efK.jpg)


HYPE IS REAL :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: menuhin on Tue, 31 October 2017, 20:14:50
Small update :
PCB currently in progress to soldering USB connector and QC by leeku and it will be shiped to me this week.
For cases my case from KBDFans still stuck on custom clearence since 22 october and this is suck  :mad:

I have some picture for PCBs

Show Image
(https://i.imgur.com/coJhPQ6.jpg)

Show Image
(https://i.imgur.com/LEPErO7.jpg)

Show Image
(https://i.imgur.com/FNh2efK.jpg)


Eagerly waiting for the PCBs.
Also for the news of how the KBDfans TINA-YAS62 case fits, so that I can finally place my order. :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: dyoungc on Tue, 31 October 2017, 21:01:42
Looks awesome! It's great to see some progress of the GB. Are there any updates on the plates?
Silent, I mentioned a while ago about changing my shipping address. Is it still possible to do that?

Sent from my SM-G955U using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Wed, 01 November 2017, 00:01:45
Looks awesome! It's great to see some progress of the GB. Are there any updates on the plates?
Silent, I mentioned a while ago about changing my shipping address. Is it still possible to do that?

Sent from my SM-G955U using Tapatalk



Sure your new address noted already :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Wed, 01 November 2017, 08:52:02
oh same here! I don't remember if I ever updated my address to you...
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Wed, 01 November 2017, 08:58:01
oh same here! I don't remember if I ever updated my address to you...

When i get all PCB and plates i will send email to everyone joined this GB to check their address before i ship it to you :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Wed, 01 November 2017, 09:34:09
oh same here! I don't remember if I ever updated my address to you...

When i get all PCB and plates i will send email to everyone joined this GB to check their address before i ship it to you :)

perfect! Now I just need to get kbd to reply to me about my case... XD
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (PRODUCTION)
Post by: gr4v3m4n on Wed, 01 November 2017, 22:00:16
Got update from leeku PCB will come next wednesday to him.
And case from KBDfans will come next wednesday too to my home.
Here's some picture of fitting case with PCB.
Seems we got extra 2 hole on bottom of case, but wei said it's just need grinding and case from kbdfans sent to me is fixed case.
I will give you picture when i get that.

Show Image
(https://i.imgur.com/ftZ1L7m.jpg)


Show Image
(https://i.imgur.com/MhAT1YI.jpg)


Show Image
(https://i.imgur.com/ph9wam7.jpg)


Show Image
(https://i.imgur.com/qDkKqNe.jpg)


Show Image
(https://i.imgur.com/OTgeZRo.jpg)


hmmm...pcb looks to fit nice, wonder if the plate would fit too.. :rolleyes:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: PlastikSchnittstelle on Fri, 03 November 2017, 10:49:32
Maybe there will be another case option:
https://geekhack.org/index.php?topic=92403.0

It started as a case i wanted to design for me personally and the YAS-pcb in particular. but now i think it may be an interesting alternative, not just for myself.

if there will be enough interest, i'll check if i can fit different versions like 60% standard and the YAS-version here together in one order.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: menuhin on Fri, 03 November 2017, 12:23:44
Maybe there will be another case option:
https://geekhack.org/index.php?topic=92403.0

It started as a case i wanted to design for me personally and the YAS-pcb in particular. but now i think it may be an interesting alternative, not just for myself.

if there will be enough interest, i'll check if i can fit different versions like 60% standard and the YAS-version here together in one order.

Interesting case design.
A few questions:
1. Does the plate mount to the top frame? Or to the bottom? And it is a "top-mount" case approach, I believe.
2. Is it a high-profile or a low-profile case? The one with Dolch caps seems to be low-profile. I personally prefer high-profile and I dislike low-profile so much that I want to move all low-profile keyboards out of my sight...
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: PlastikSchnittstelle on Fri, 03 November 2017, 12:29:27
Interesting case design.

thank you.

I don't want to hijack this thread, this here is for the YAS only. so please post question regarding the case over there.
@menuhin all your questions are answered in the starting post, i know, it's a little bit much to read, sry :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Tue, 07 November 2017, 06:51:37
Maybe there will be another case option:
https://geekhack.org/index.php?topic=92403.0

It started as a case i wanted to design for me personally and the YAS-pcb in particular. but now i think it may be an interesting alternative, not just for myself.

if there will be enough interest, i'll check if i can fit different versions like 60% standard and the YAS-version here together in one order.

That was interesting design, i need to get one for sure!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Tue, 07 November 2017, 07:04:44
Finally after stuck on custom clearance about 2 weeks case from KBDFans arrived to my home 2 days ago.

There's picture i take with keycaps to see how gap ob blocker fit perfectly, but for bottom case gap i think it bigger than others.
But that's ok for me.

(https://i.imgur.com/EaOB5yl.jpg)

(https://i.imgur.com/ALNeZfK.jpg)

(https://i.imgur.com/HTF5mRS.jpg)

(https://i.imgur.com/DpYP83W.jpg)

I got some news from leeku and i think it will be another heart breaker.
After i'm looking back to new PCB i found that :
- Missing hole centered stem 6u has been fixed
- Missing 1 stabilizer hole fixed too
- But split spacebar flipped (which is must be 2.25u-1.25u-2.75u) to fit perfectly with plate i design not fixed yet :(

So leeku made another PCB and will be send it to me by 18 November.
For PCB done before with flipped spacebar (2.75u-1.25u-2.25u) i think i will sell it as B-stock and made another plate to sell it as extras.
I will find new plate vendor to get it faster and i hope it will make cost lower but still with same quality.
I really hope can finish it this last month, it's been too long for you to get this PCB.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Tue, 07 November 2017, 09:02:10
augh. those pictures look so freakin' good though. I'm dying tbh.
I'm glad you're being so transparent and working hard for us and accepting nothing but the best!

I hope I get the plate/pcb by the end of the year with my keycaps and case :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: PlastikSchnittstelle on Tue, 07 November 2017, 09:49:18
"But split spacebar flipped (which is must be 2.25u-1.25u-2.75u) to fit perfectly with plate i design not fixed yet"

this particular detail is not an issue for me, since I won't use split spacebar anyway. So for me you can just send this version. this way you wouldn't have to sell it as b stock. hope I can support this GB this way a bit.

I was really surprised that not more were excited about this PCB. maybe the renderings from my case IC will arouse some more interest, so you might be able to make a round two in the future.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Tue, 07 November 2017, 10:16:46
augh. those pictures look so freakin' good though. I'm dying tbh.
I'm glad you're being so transparent and working hard for us and accepting nothing but the best!

I hope I get the plate/pcb by the end of the year with my keycaps and case :)

I can't do anything else except being transparent since this is my first GB too.
I hope everything goes well :)

"But split spacebar flipped (which is must be 2.25u-1.25u-2.75u) to fit perfectly with plate i design not fixed yet"

this particular detail is not an issue for me, since I won't use split spacebar anyway. So for me you can just send this version. this way you wouldn't have to sell it as b stock. hope I can support this GB this way a bit.

I was really surprised that not more were excited about this PCB. maybe the renderings from my case IC will arouse some more interest, so you might be able to make a round two in the future.

Yeah for universal or other layout still ok to, there's need 15 PCB need to fix to fit split spacebar plate i made.
I talk too leeku just make another plate for that 15 pcs with new design plate. But he said he will make new PCB.
So we need to sell that last PCB too.

Sure I have plan for round 2 but it will be full kit with case, but i will change pcb not from leeku i will make new firmware with my friend and make case here in Indonesia so i can controll everything.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: menuhin on Tue, 07 November 2017, 11:45:15
... For PCB done before with flipped spacebar (2.75u-1.25u-2.25u) i think i will sell it as B-stock and made another plate to sell it as extras ...

I hit the space bar mostly using my left thumb, this seems perfect to me!  :p :cool:
Please reserve one of these PCB+plate for me.

Thanks again for making sure that all things are working.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Asbrodeus on Tue, 07 November 2017, 12:30:21
I just got my tina case! hype!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: cynviloq on Tue, 07 November 2017, 12:40:08
When did the TINA case invoice go out? I never received one after signing up for 2 cases and also emailing with the KBD person..
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: menuhin on Tue, 07 November 2017, 13:32:14
When did the TINA case invoice go out? I never received one after signing up for 2 cases and also emailing with the KBD person..

You can order the TINA YAS62 case from KBD (Wei) directly from their website, it is now listed there:
https://kbdfans.cn/collections/case/products/yas62-keyboard-case

I just got my tina case! hype!

You have got the case before the PCB!  :thumb:

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Wed, 08 November 2017, 01:22:19
... For PCB done before with flipped spacebar (2.75u-1.25u-2.25u) i think i will sell it as B-stock and made another plate to sell it as extras ...

I hit the space bar mostly using my left thumb, this seems perfect to me!  :p :cool:
Please reserve one of these PCB+plate for me.

Thanks again for making sure that all things are working.

Well since you ordered universal plate it will work with this last PCB ;D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: FoC_Tow on Wed, 08 November 2017, 04:35:20
If b-stock means more pcbs for sale Iím definitely in =)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Che.R.Ry on Wed, 08 November 2017, 07:01:39
Finally after stuck on custom clearance about 2 weeks case from KBDFans arrived to my home 2 days ago.

There's picture i take with keycaps to see how gap ob blocker fit perfectly, but for bottom case gap i think it bigger than others.
But that's ok for me.

Show Image
(https://i.imgur.com/EaOB5yl.jpg)


Show Image
(https://i.imgur.com/ALNeZfK.jpg)


Show Image
(https://i.imgur.com/HTF5mRS.jpg)


Show Image
(https://i.imgur.com/DpYP83W.jpg)


I got some news from leeku and i think it will be another heart breaker.
After i'm looking back to new PCB i found that :
- Missing hole centered stem 6u has been fixed
- Missing 1 stabilizer hole fixed too
- But split spacebar flipped (which is must be 2.25u-1.25u-2.75u) to fit perfectly with plate i design not fixed yet :(

So leeku made another PCB and will be send it to me by 18 November.
For PCB done before with flipped spacebar (2.75u-1.25u-2.25u) i think i will sell it as B-stock and made another plate to sell it as extras.
I will find new plate vendor to get it faster and i hope it will make cost lower but still with same quality.
I really hope can finish it this last month, it's been too long for you to get this PCB.

oh goooosh look at that beauty!!!
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Wed, 08 November 2017, 23:57:46
Smalls update:
- Layout has been fixed and submitted to factory with both support split spacebar (2.25u-1.25u-2.75u) and (2.75u-1.25u-2.25u)
- Plate shipped already to leeku from factory so it will be shipped to me next week
- I have 73 PCBs extras with just support (2.75u-1.25u-2.25u) for split spacebar and i will sell it about $50 for PCBs less $5 dollars from fixed PCBs :)

Let me know if you want add extras to your order or if you missed from last order. I'm still find new factory for plate i find one atm with ss material about $25 each
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: teamrushpntball on Thu, 09 November 2017, 09:30:06
Does the 2.75 - 1.25 - 2.25 pcb work with the universal brass plate?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Thu, 09 November 2017, 10:34:06
Does the 2.75 - 1.25 - 2.25 pcb work with the universal brass plate?

Yes i use universal for mine atm too.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: FailureToLoad on Mon, 13 November 2017, 07:08:40
Smalls update:
- Layout has been fixed and submitted to factory with both support split spacebar (2.25u-1.25u-2.75u) and (2.75u-1.25u-2.25u)
- Plate shipped already to leeku from factory so it will be shipped to me next week
- I have 73 PCBs extras with just support (2.75u-1.25u-2.25u) for split spacebar and i will sell it about $50 for PCBs less $5 dollars from fixed PCBs :)

Let me know if you want add extras to your order or if you missed from last order. I'm still find new factory for plate i find one atm with ss material about $25 each

I missed the original GB but am 100% interested in picking up a split-space PCB and plate if there's extra stock.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: PlastikSchnittstelle on Sat, 18 November 2017, 12:39:31
I missed the original GB but am 100% interested in picking up a split-space PCB and plate if there's extra stock.

maybe there will be more, read here:
https://geekhack.org/index.php?topic=92403.msg2523359#msg2523359
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Tue, 21 November 2017, 06:58:22
Another update~

- Fixed PCB has been ship to leeku
- Plate already arrived at leeku house but Alu & SS material back to reproducing because there's some bend on that material, for Brass it's ready to ship

Here is some picture of plate from leeku

(https://i.imgur.com/e30AjgS.jpg)
(https://i.imgur.com/mvGvZhi.jpg)
(https://i.imgur.com/6yMIaeS.jpg)
(https://i.imgur.com/Wp4vCdd.jpg)
(https://i.imgur.com/ydT12KZ.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: teamrushpntball on Tue, 21 November 2017, 14:32:58
Looking good for the brass, and rather awful for the steel.  Damaged in transport or did the manufacturer really think that was acceptable?

Any idea when the brass plates + pcb's may ship or waiting to ship everything at once?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Wed, 29 November 2017, 09:33:56
Any idea when the brass plates + pcb's may ship or waiting to ship everything at once?

+1
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Mon, 04 December 2017, 00:40:34
Any idea when the brass plates + pcb's may ship or waiting to ship everything at once?

+1

It's on USB soldering atm.
I think PCB will be shipped this week to me not sure about plate now.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Thu, 07 December 2017, 02:24:36
Ok i have good news.

All PCB are ready to ship to me tommorow.
But we still need wait about plate.
And i think i will ship it on early January, I hope you understand this because too risky to ship package by the end of year here.
And if anyone want extras PCB for $50 just hit me up on PM but i can't give you plate option except you will take SS material, i will lasercut it here and it's for $30.

Thanks! Have a good day~

(https://i.imgur.com/dj9uZPX.jpg)
(https://i.imgur.com/dj9uZPX.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Tue, 19 December 2017, 03:14:33
New update :

I got PCB yesterday.
And PCB will be ship to me about next week.
It will arrived to Indonesia about 2 weeks, so i think i will ship it to you end of january or february.
And i just remember i make this thread february last year so it will be our GB anniversary  :)), and i plan to give free custom sleeve i made for every GB participant got 1 free sleeve *not 1 PCB 1 sleeve.
I will update picture ASAP.

Thanks!

Have a good day~
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: FoC_Tow on Tue, 19 December 2017, 05:58:19
Great News Silent!

Would be awesome to get a sleeve with the yas =)

Really love your sleeves, been using them since I got one.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Tue, 19 December 2017, 08:27:49
Thanks silent :) thatís cool of you! I have most the other parts ready so I canít wait to start building soon.

On a separate note, if anyone has an extra brass plate or doesnít want theirs and is willing to sell or trade for an ss one + paypal, let me know. Iíve had a change of heart a bit late XD
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Che.R.Ry on Wed, 20 December 2017, 05:25:57
New update :

I got PCB yesterday.
And PCB will be ship to me about next week.
It will arrived to Indonesia about 2 weeks, so i think i will ship it to you end of january or february.
And i just remember i make this thread february last year so it will be our GB anniversary  :)), and i plan to give free custom sleeve i made for every GB participant got 1 free sleeve *not 1 PCB 1 sleeve.
I will update picture ASAP.

Thanks!

Have a good day~

great news silentreader! thx for making this GB once again, no regrets :D
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: jok on Wed, 20 December 2017, 17:33:06
I'm so sad I missed out on this. Is there anyway I can get one of these board + plate? Or out of luck  :(
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: FoC_Tow on Thu, 21 December 2017, 02:52:50
PCBs are still available from Silent, and you could pair those with a Tina YAS or a SKBXX Case =)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Marutks on Thu, 21 December 2017, 04:44:54
PCBs are still available from Silent

What is Silent?   Do they sell YAS plates?
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Thu, 21 December 2017, 08:48:57
Wat. He's the guy running the gb. If you read the thread, you'd see he has PCB leftovers (no plates) and the PCBs are "b-stock" because the split spacebar layout is kinda wrong.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Che.R.Ry on Thu, 21 December 2017, 11:56:47
I'm so sad I missed out on this. Is there anyway I can get one of these board + plate? Or out of luck  :(

 go contact the GB runner, seems like he had some extras on his post i quoted below

Ok i have good news.

All PCB are ready to ship to me tommorow.
But we still need wait about plate.
And i think i will ship it on early January, I hope you understand this because too risky to ship package by the end of year here.
And if anyone want extras PCB for $50 just hit me up on PM but i can't give you plate option except you will take SS material, i will lasercut it here and it's for $30.

Thanks! Have a good day~

Show Image
(https://i.imgur.com/dj9uZPX.jpg)

Show Image
(https://i.imgur.com/dj9uZPX.jpg)


Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: jok on Thu, 21 December 2017, 15:29:02
I'm so sad I missed out on this. Is there anyway I can get one of these board + plate? Or out of luck  :(

 go contact the GB runner, seems like he had some extras on his post i quoted below

Ok i have good news.

All PCB are ready to ship to me tommorow.
But we still need wait about plate.
And i think i will ship it on early January, I hope you understand this because too risky to ship package by the end of year here.
And if anyone want extras PCB for $50 just hit me up on PM but i can't give you plate option except you will take SS material, i will lasercut it here and it's for $30.

Thanks! Have a good day~

Show Image
(https://i.imgur.com/dj9uZPX.jpg)

Show Image
(https://i.imgur.com/dj9uZPX.jpg)

Thank very much.  I PMd. Appreciate it.

Sent from my Pixel 2 XL using Tapatalk

Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: FoC_Tow on Fri, 05 January 2018, 21:56:55
Any updates Silent?
Canít wait to get my hands on these =)

Btw, shot you a pm about extras
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Sat, 06 January 2018, 13:01:22
Any updates Silent?
Canít wait to get my hands on these =)

Btw, shot you a pm about extras

Hi!

I will reply your PM here because there will update to everyone too :))

Firts,Yea i got your message and i still have YAS62 extras.
For plate i decide to make it here because i got vendor who can make many layout even it just 1 pcs plate.
But i just have SS and Brass material here. So i will use that this time.
But for time i still wait news from leeku about our plate from original group buy.
After i got news plate are ready to ship to me i will run fast GB for extras PCB and plate.
I will ask leeku to ship extras PCB shipped together with plate and it will need 2 weeks to arrived to me.
So i have time to make plate here, that's make original GB participant if want buy some extras will get their extras shipped together with their order. :)

For everyone join original GB if you want add extras just shot me PM so i can know how much i need to ship extras PCB to me together with plate.

I will update sample pic i made here very soon.

Thanks!
Happy new year all~
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Tue, 09 January 2018, 08:17:20
Is it possible for me to switch my order from ss to brass plate since you're building more?!

If not, I might just have to buy another PCB.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: ppp on Sun, 21 January 2018, 21:17:00
any updates? :)

almost been a year since the beginning of the group buy woooo!!  :cool:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Wed, 24 January 2018, 08:51:58
any updates? :)

almost been a year since the beginning of the group buy woooo!!  :cool:

IKR :( But don't worry i already make something specials to ship together with this PCB  ;D

Actually i want run extras last monday but i got notified from leeku plate not shipped to him yet.
And i don't want ship extras faster than original groupbuy because i'm sure i can finish plate for extras in 1 month.
I hope plate from leeku can shipped to me this month.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: SirHobo on Wed, 24 January 2018, 14:26:56
Will there be any leftovers for sale? I just heard of this groupbuy recently from another thread on deskthority, which is a shame because I would have sprung on this GB earlier if I knew about it.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Wed, 24 January 2018, 15:59:53
Will there be any leftovers for sale? I just heard of this groupbuy recently from another thread on deskthority, which is a shame because I would have sprung on this GB earlier if I knew about it.

I have 70 PCB left for sale without plate.
So i will open new form for this leftover with ss and brass option.
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Harms on Wed, 24 January 2018, 16:05:41
Will there be any leftovers for sale? I just heard of this groupbuy recently from another thread on deskthority, which is a shame because I would have sprung on this GB earlier if I knew about it.

I have 70 PCB left for sale without plate.
So i will open new form for this leftover with ss and brass option.

Sounds awesome :)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: SirHobo on Wed, 24 January 2018, 16:41:32
Will there be any leftovers for sale? I just heard of this groupbuy recently from another thread on deskthority, which is a shame because I would have sprung on this GB earlier if I knew about it.

I have 70 PCB left for sale without plate.
So i will open new form for this leftover with ss and brass option.

Awesome! I'll keep my eyes peeled for it  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Tue, 30 January 2018, 16:39:41
Not much update this time.
I just finish sample of sleeve i will send it as gift for our 1 year groubuy :))
Yesterday i talk to leeku he said plate will be ship to him yesterday. But i'm not sure with this one because we already got some delay with same reason.
Stack of PCB and packaging are ready yet. So let's wait again for plate shipping~
I will run extras PCB when plate shipped to me. I don't want send extras faster than original GB it self. Hope everything goes well this week.

(https://i.imgur.com/TpFmETN.jpg)

(https://i.imgur.com/VaIKCPB.jpg)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: FoC_Tow on Tue, 30 January 2018, 17:58:56
Woohoo!

Sleeves look sick man.
Really loving the signature side, soo clean <3

Thx Silent!
Canít wait =)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: menuhin on Tue, 30 January 2018, 20:54:11
That's so dope Silent!  :thumb:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: gr4v3m4n on Tue, 30 January 2018, 20:57:54
my tina case is feeling lonely right about now, need its companion. nah..just joking :p


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Tue, 30 January 2018, 21:22:42
That's so dope Silent!  :thumb:

Woohoo!

Sleeves look sick man.
Really loving the signature side, soo clean <3

Thx Silent!
Canít wait =)


Thanks guys!
Lets just wait again until it shipped :))

my tina case is feeling lonely right about now, need its companion. nah..just joking :p


Sent from my iPhone using Tapatalk

Lol chill dude you are not waiting as long as other people do :p
Title: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: gr4v3m4n on Tue, 30 January 2018, 23:32:28
Quote
Lol chill dude you are not waiting as long as other people do

yea i know, just joking around bruv..



Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Che.R.Ry on Wed, 31 January 2018, 05:38:28
Not much update this time.
I just finish sample of sleeve i will send it as gift for our 1 year groubuy :))
Yesterday i talk to leeku he said plate will be ship to him yesterday. But i'm not sure with this one because we already got some delay with same reason.
Stack of PCB and packaging are ready yet. So let's wait again for plate shipping~
I will run extras PCB when plate shipped to me. I don't want send extras faster than original GB it self. Hope everything goes well this week.

Show Image
(https://i.imgur.com/TpFmETN.jpg)


Show Image
(https://i.imgur.com/VaIKCPB.jpg)

whoooaaa sleek and clean, nice design :eek:
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: yasintahir on Wed, 31 January 2018, 13:04:23
Guys, I have good news!
Finally~
Plate arrived at leeku and will be arrived in my home about 2 weeks from korea.
I will run extras this week, and will update form here ;D

(https://i.imgur.com/VuV1wlh.png)
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: FoC_Tow on Wed, 31 January 2018, 13:08:54
Guys, I have good news!
Finally~
Plate arrived at leeku and will be arrived in my home about 2 weeks from korea.
I will run extras this week, and will update form here ;D

Show Image
(https://i.imgur.com/VuV1wlh.png)


Hyyyype <3<3<3
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Che.R.Ry on Wed, 31 January 2018, 17:08:55
Guys, I have good news!
Finally~
Plate arrived at leeku and will be arrived in my home about 2 weeks from korea.
I will run extras this week, and will update form here ;D

Show Image
(https://i.imgur.com/VuV1wlh.png)

HYPE IS REAL :p
Title: Re: [GB] YAS62 | 60% PCB with arrow cluster (FINISHING)
Post by: Asbrodeus on Thu, 01 February 2018, 06:00:05
yaaaaaaaaaaas
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 01 February 2018, 14:42:37
Alright i already got tracking number from leeku.
It will take 2 weeks to Indonesia. I will send it to you end of february, maybe? Need at least 1-2 weeks to package all of this.




For extras you can fill this form. https://goo.gl/forms/BhHduifLU3PktPRs2
FCFS so if you want take this, this is your time.
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: teamrushpntball on Fri, 09 February 2018, 13:40:07
Sent you a pm a few days ago for an address update.  Glad this is coming along.
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: E_rik on Tue, 13 February 2018, 09:17:19
There are more PCBs that support arrow keys in a 60% form factor. But I think this is the best solution. I'm filling in the form right now.
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: DukeMugen on Thu, 01 March 2018, 03:17:15
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: ayamterbang on Thu, 01 March 2018, 03:26:43
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
from my last convo with OP, extras still available.

Sent from my SM-G930F using Tapatalk

Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Thu, 01 March 2018, 03:42:42
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
no word on shipping yet so should be available still, i think kbdfans case is almost out.


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: DukeMugen on Thu, 01 March 2018, 03:51:34
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
no word on shipping yet so should be available still, i think kbdfans case is almost out.


Sent from my iPhone using Tapatalk

Did you receive an email for the payment?
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 01 March 2018, 03:57:43
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
no word on shipping yet so should be available still, i think kbdfans case is almost out.


Sent from my iPhone using Tapatalk

Did you receive an email for the payment?

Actually i'm already send extras order to leeku, and it's waiting for ship and all plate extras already done. Let me ask him if he still don't ship my order i will add your order.
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: DukeMugen on Thu, 01 March 2018, 04:01:05
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
no word on shipping yet so should be available still, i think kbdfans case is almost out.


Sent from my iPhone using Tapatalk

Did you receive an email for the payment?

Actually i'm already send extras order to leeku, and it's waiting for ship and all plate extras already done. Let me ask him if he still don't ship my order i will add your order.

That would be GREAT! Cos i've already bought the case from kbdfans 5 mins ago!!! LOL
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 01 March 2018, 04:03:20
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
no word on shipping yet so should be available still, i think kbdfans case is almost out.


Sent from my iPhone using Tapatalk

Did you receive an email for the payment?

Actually i'm already send extras order to leeku, and it's waiting for ship and all plate extras already done. Let me ask him if he still don't ship my order i will add your order.

That would be GREAT! Cos i've already bought the case from kbdfans 5 mins ago!!! LOL

Alright already sent your order, and invoice sent! :)
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: DukeMugen on Thu, 01 March 2018, 04:04:42
I filled up the form for this yesterday. Are there still available pcbs? I haven't gotten the email for the payment and hoping i'll get it soon before I pull the trigger on the case from kbdfans :)
no word on shipping yet so should be available still, i think kbdfans case is almost out.


Sent from my iPhone using Tapatalk

Did you receive an email for the payment?

Actually i'm already send extras order to leeku, and it's waiting for ship and all plate extras already done. Let me ask him if he still don't ship my order i will add your order.

That would be GREAT! Cos i've already bought the case from kbdfans 5 mins ago!!! LOL

Alright already sent your order, and invoice sent! :)

PAID! Thank you!
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: ppp on Thu, 01 March 2018, 12:00:33
So has the original gb shipped? I'm confused :oo
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 01 March 2018, 12:02:00
So has the original gb shipped? I'm confused :oo
Let me ship it this monday :)

Sent from my Redmi Note 4 using Tapatalk

Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: ppp on Thu, 01 March 2018, 12:51:49
So has the original gb shipped? I'm confused :oo
Let me ship it this monday :)

Sent from my Redmi Note 4 using Tapatalk

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

HYPE
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: FoC_Tow on Thu, 01 March 2018, 15:11:26
Shipping on Monday??

Hyped!
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: DukeMugen on Fri, 02 March 2018, 01:45:46
Hello! Silly question. Anyone using this for mac?
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: E_rik on Sat, 03 March 2018, 11:15:24
I will be using this for Mac.
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: [Lewynlight] on Tue, 06 March 2018, 04:03:49
here's some info for you guys:
1. silentreader finished packing the package sometimes this morning (GMT+7 Local time), and it has been picked up by post office.

2. silentreader is ded coz 2 days of non-stop working packaging the goods. RIP.

Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 06 March 2018, 04:06:07
here's some info for you guys:
1. silentreader finished packing the package sometimes this morning (GMT+7 Local time), and it has been picked up by post office.

2. silentreader is ded coz 2 days of non-stop working packaging the goods. RIP.
Damn forgot to update here lol

I will send tracking number later through email.

*PS : Extras PCB will be arrived eta 2 weeks and extras plate is done too.
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: jenggo on Tue, 06 March 2018, 19:59:42
guys guys...
i have news...
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: Che.R.Ry on Wed, 07 March 2018, 12:29:47
guys guys...
i have news...
what kind of news mr. jenggo?
did your board arrived already?
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: ChitownM2 on Wed, 07 March 2018, 22:09:58
So has this shipped? I haven't received any email indicating as such or a tracking #....
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: ppp on Wed, 07 March 2018, 22:27:55
So has this shipped? I haven't received any email indicating as such or a tracking #....

I received a text with a tracking number from the shipping company
Title: Re: [GB] YAS62 | Shipping schedule Updated (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 08 March 2018, 00:46:36
So has this shipped? I haven't received any email indicating as such or a tracking #....

All tracking number has been sent by email.

Sorry for make you wait again :p
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: BerserkZz on Thu, 08 March 2018, 01:05:23
The link has been disabled for some reason.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 08 March 2018, 01:10:30
The link has been disabled for some reason.

Pls check again new email
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: FoC_Tow on Thu, 08 March 2018, 10:24:24
I didnít receive an email as far as I can tell
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 08 March 2018, 10:31:03
I didnít receive an email as far as I can tell

I send it  to ************** check you spam
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: FoC_Tow on Thu, 08 March 2018, 10:32:59
I didnít receive an email as far as I can tell

I send it  to ****************** check you spam


Ok thx so old mail address.

Also I donít really mind much but could you remove the mail address from your post pls :D
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 08 March 2018, 11:04:51
I didnít receive an email as far as I can tell

I send it  to ****************** check you spam


Ok thx so old mail address.

Also I donít really mind much but could you remove the mail address from your post pls :D

Done :)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: FoC_Tow on Thu, 08 March 2018, 11:48:15
Thankies <3
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: DasGnome on Fri, 09 March 2018, 07:32:05
Am I blind or is there no information on what we're using to program this PCB?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Fri, 09 March 2018, 07:41:04
Am I blind or is there no information on what we're using to program this PCB?

Use new version jigon.
Download file here http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787

Note: i use this version JigOn_170419.zip
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ppp on Fri, 09 March 2018, 08:08:05
btw just throwing this out there one more time,
If anyone has an extra/wants to trade a brass plate, I'd love to get one. I have an SS one I can trade+cash for. Thanks!
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: darkslay3r on Fri, 09 March 2018, 08:40:41
I thought this was only a myth, not anymore

(https://uploads.tapatalk-cdn.com/20180309/37a3afafadad0dd0089dd70ccee11abf.jpg)


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ppp on Fri, 09 March 2018, 22:09:50
Just making sure... I'm supposed to break off the top and bottom parts.... right? X___X
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Fri, 09 March 2018, 22:14:12
Just making sure... I'm supposed to break off the top and bottom parts.... right? X___X
Yes break that top and bottom part
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: menuhin on Mon, 12 March 2018, 05:56:12
(https://i.imgur.com/MpzjQk1.jpg)

The package arrived Saturday but I only have time to take a look at it today:
Gorgeous custom design, very solidly made brass plate, and the keyboard sleeve is just perfect.

Silent, thank you so much for making this a reality! :)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Mon, 12 March 2018, 06:34:24
Show Image
(https://i.imgur.com/MpzjQk1.jpg)


The package arrived Saturday but I only have time to take a look at it today:
Gorgeous custom design, very solidly made brass plate, and the keyboard sleeve is just perfect.

Silent, thank you so much for making this a reality! :)

Your welcome dude!
Glad it arrived safely  :thumb:
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Koriko on Mon, 12 March 2018, 12:58:21
So what's the the extra PCB strips near the top and bottom? Are we supposed to snap them off, or are they going into the TINA case? (Just ordered my case so I don't have it yet._
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Mon, 12 March 2018, 13:03:28
So what's the the extra PCB strips near the top and bottom? Are we supposed to snap them off, or are they going into the TINA case? (Just ordered my case so I don't have it yet._
You need to take them off
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: C7Kinetic on Mon, 12 March 2018, 13:34:07
(https://i.imgur.com/GSOLKAZ.jpg)
(https://i.imgur.com/aiSg7c4.jpg)

Package came in this morning!
Oh man, I can't wait to get started putting this together. Big thanks to Silent for running this GB  :D
Title: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Mon, 12 March 2018, 16:13:19
So just saw this for the first time, obviously GB over. I understand there are spares? Are there? Whatís in the kit for what price and how could I acquire one?

Edit: would appreciate a Pm :)


Sent from my iPad using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: vtachkov on Mon, 12 March 2018, 17:15:34
So just saw this for the first time, obviously GB over. I understand there are spares? Are there? Whatís in the kit for what price and how could I acquire one?

Edit: would appreciate a Pm :)


Sent from my iPad using Tapatalk

There's a link on the first post to a google form you can fill out if you'd like to order an extra.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Mon, 12 March 2018, 17:41:55
So just saw this for the first time, obviously GB over. I understand there are spares? Are there? Whatís in the kit for what price and how could I acquire one?

Edit: would appreciate a Pm :)


Sent from my iPad using Tapatalk

There's a link on the first post to a google form you can fill out if you'd like to order an extra.

Cool! Thx :)


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Mon, 12 March 2018, 22:32:48
(https://uploads.tapatalk-cdn.com/20180313/96f2e072a5cc51e470cc2673d174bd41.jpg)

(https://uploads.tapatalk-cdn.com/20180313/5eeb2a0a8bc72443372d601d74a0c407.jpg)

my build with mix aristotle.


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 13 March 2018, 04:40:18
Show Image
(https://i.imgur.com/GSOLKAZ.jpg)

Show Image
(https://i.imgur.com/aiSg7c4.jpg)


Package came in this morning!
Oh man, I can't wait to get started putting this together. Big thanks to Silent for running this GB  :D

Also thank you for your patience ;D
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 13 March 2018, 04:42:12
So just saw this for the first time, obviously GB over. I understand there are spares? Are there? Whatís in the kit for what price and how could I acquire one?

Edit: would appreciate a Pm :)


Sent from my iPad using Tapatalk

There's a link on the first post to a google form you can fill out if you'd like to order an extra.

Cool! Thx :)


Sent from my iPhone using Tapatalk

Yep you can fill form, i already have 2 extras PCB on my hand and just need to make extras plate about 2 days :)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 13 March 2018, 04:45:21
Show Image
(https://uploads.tapatalk-cdn.com/20180313/96f2e072a5cc51e470cc2673d174bd41.jpg)


Show Image
(https://uploads.tapatalk-cdn.com/20180313/5eeb2a0a8bc72443372d601d74a0c407.jpg)


my build with mix aristotle.


Sent from my iPhone using Tapatalk

Great! I use aristotle too on my first YAS62 PCB
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: E_rik on Tue, 13 March 2018, 05:22:05
The extra PCBs are the old version with the 'swapped split spacebar error'. Am I right?

Initially I planned to use normal spacebars. But reading posts like https://geekhack.org/index.php?topic=92199.0 (https://geekhack.org/index.php?topic=92199.0) got me interested in split spacebars.

Silent: I ordered 2 PCBs a couple of weeks ago. If you happen to have some v1.7 PCBs, I would be very grateful. Happy to pay extra.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 13 March 2018, 05:34:36
The extra PCBs are the old version with the 'swapped split spacebar error'. Am I right?

Initially I planned to use normal spacebars. But reading posts like https://geekhack.org/index.php?topic=92199.0 (https://geekhack.org/index.php?topic=92199.0) got me interested in split spacebars.

Silent: I ordered 2 PCBs a couple of weeks ago. If you happen to have some v1.7 PCBs, I would be very grateful. Happy to pay extra.

Yep it swapped split spacebar, but this is not big deal even i build 2 keebs with this PCB.

For v1.7 i keep extras just in case someone got problem on their PCB
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Tue, 13 March 2018, 10:39:13
Just placed an order, awaiting your confirmation before ordering a case :P


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 13 March 2018, 10:47:36
Just placed an order, awaiting your confirmation before ordering a case :P


Sent from my iPhone using Tapatalk

If you don't mind i'm ship it late or early next month :)
I ordered 22 pcs extras from leeku last time, and it's just 1 left but i got 4 order today so i need another extrars again from him
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: kupaeto on Wed, 14 March 2018, 03:38:25
Hi Is it still possible to place a spare order?

And I want to know the shipping price to South Korea(or US DE 19805)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: odd on Wed, 14 March 2018, 03:40:15
Here is my build. Love this keyboard  ;D ;D

(https://image.ibb.co/bv75cx/IMG_20180314_002731.jpg)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Wed, 14 March 2018, 03:42:38
Hi Is it still possible to place a spare order?

And I want to know the shipping price to South Korea(or US DE 19805)
Yes of course!

Shipping price is $30 for all over worldwide
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: C7Kinetic on Wed, 14 March 2018, 03:44:48
(https://i.imgur.com/ny27RlW.jpg)
(https://i.imgur.com/JR0sysc.jpg)
(https://i.imgur.com/nkBmmkD.jpg)

Build finished! Built with 68g Zealio stems inside Panda housings. Spacebars have 85g linear stems and all other modifiers with 68g linear stems. This is as close to endgame I'm ever going to get  :p

BTW, is there anyway to map a key in Leeku's software to turn on/off underglow?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Wed, 14 March 2018, 03:47:46
Here is my build. Love this keyboard  ;D ;D

Show Image
(https://image.ibb.co/bv75cx/IMG_20180314_002731.jpg)


Great!
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Wed, 14 March 2018, 03:49:41
Show Image
(https://i.imgur.com/ny27RlW.jpg)

Show Image
(https://i.imgur.com/JR0sysc.jpg)

Show Image
(https://i.imgur.com/nkBmmkD.jpg)


Build finished! Built with 68g Zealio stems inside Panda housings. Spacebars have 85g linear stems and all other modifiers with 68g linear stems. This is as close to endgame I'm ever going to get  :p

BTW, is there anyway to map a key in Leeku's software to turn on/off underglow?
that is a really great case.
you know i want to ask the same question. theres a keymap labeled led mode0-3, but it dont seem to do anything.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Wed, 14 March 2018, 03:50:47
Show Image
(https://i.imgur.com/ny27RlW.jpg)

Show Image
(https://i.imgur.com/JR0sysc.jpg)

Show Image
(https://i.imgur.com/nkBmmkD.jpg)


Build finished! Built with 68g Zealio stems inside Panda housings. Spacebars have 85g linear stems and all other modifiers with 68g linear stems. This is as close to endgame I'm ever going to get  :p

BTW, is there anyway to map a key in Leeku's software to turn on/off underglow?

Very najs! another split spacebar  :thumb:

Do you use jigon version 170419? there's option to turn of underglow led from that firmware
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Wed, 14 March 2018, 03:52:01
Show Image
(https://i.imgur.com/ny27RlW.jpg)

Show Image
(https://i.imgur.com/JR0sysc.jpg)

Show Image
(https://i.imgur.com/nkBmmkD.jpg)


Build finished! Built with 68g Zealio stems inside Panda housings. Spacebars have 85g linear stems and all other modifiers with 68g linear stems. This is as close to endgame I'm ever going to get  :p

BTW, is there anyway to map a key in Leeku's software to turn on/off underglow?

Very najs! another split spacebar  :thumb:

Do you use jigon version 170419? there's option to turn of underglow led from that firmware
can we map a key to turn on and off the led?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Wed, 14 March 2018, 03:53:16
Look at the attachement to turn off your underglow led
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: C7Kinetic on Wed, 14 March 2018, 04:58:40
Show Image
(https://i.imgur.com/ny27RlW.jpg)

Show Image
(https://i.imgur.com/JR0sysc.jpg)

Show Image
(https://i.imgur.com/nkBmmkD.jpg)


Build finished! Built with 68g Zealio stems inside Panda housings. Spacebars have 85g linear stems and all other modifiers with 68g linear stems. This is as close to endgame I'm ever going to get  :p

BTW, is there anyway to map a key in Leeku's software to turn on/off underglow?

Very najs! another split spacebar  :thumb:

Do you use jigon version 170419? there's option to turn of underglow led from that firmware
can we map a key to turn on and off the led?

I looked into it and apparently in the latest L3 firmware (L3_171209) there are certain "cheat" phrases you type into the keyboard to toggle some functions. Leeku detailed the available ones:

"bforceled" - LED on  (Save settings x)
"dforceled" - LED off   (save settings x)
"showmergb" -RGB on   (Save settings o)
"turnoffrgb" - RGB off  (save settings o)
"nomentionm" - Do not output string when macro recording  (Save setting x)
"onmentionm" - Outputs a string for macro recording (Save setting x)

To use these, just type the phrase and then press enter (handy to use the keylock fn beforehand)

Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: E_rik on Wed, 14 March 2018, 15:47:57
The extra PCBs are an older version that don't support split spacebar 2.25 + 1.25 + 2.75 (wider part on the right). They do support 2.75 + 1.25 + 2.25 (wider part on the left).

I did not receive the PCB yet, but I looked carefully at the pictures that Silent posted last year. And I found an undocumented layout for the bottom row that I think should work: 1.25 + 1 + 2.25 + 1.25 + 2.75 + 1 + 1 + 1 + 1.

[attach=1]

Can someone confirm that this will work?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Wed, 14 March 2018, 17:39:51
The extra PCBs are an older version that don't support split spacebar 2.25 + 1.25 + 2.75 (wider part on the right). They do support 2.75 + 1.25 + 2.25 (wider part on the left).

I did not receive the PCB yet, but I looked carefully at the pictures that Silent posted last year. And I found an undocumented layout for the bottom row that I think should work: 1.25 + 1 + 2.25 + 1.25 + 2.75 + 1 + 1 + 1 + 1.

(Attachment Link)

Can someone confirm that this will work?

Yes that's work on universal plate ;)

(https://i.imgur.com/PqQh9jO.jpg)

(https://i.imgur.com/j1vUGLx.jpg)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: E_rik on Wed, 14 March 2018, 17:43:55
Thank you Silentreader!  :thumb:
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: 69420swag on Thu, 15 March 2018, 01:21:18
would my DZ60 pcb fit in this case if I picked the case up from kbdfans?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Thu, 15 March 2018, 01:38:04
would my DZ60 pcb fit in this case if I picked the case up from kbdfans?
dont think you can, theres a non standard blockers. i dont know exactly what unit, but its a non standard bottom row.


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Dystopia on Thu, 15 March 2018, 04:06:16
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
Title: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Thu, 15 March 2018, 04:09:54
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Dystopia on Thu, 15 March 2018, 04:29:54
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk

Strange, I've spent the past 20 mins trying to force in like 3 switches and they just wouldn't sit flush against the PCB. Might be because my Zeals are from a different round than yours but I don't think the variance should be that much. Maybe I'll just use different switches instead because my fingers are sore from putting in just a few switches.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Thu, 15 March 2018, 04:37:22
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk

Strange, I've spent the past 20 mins trying to force in like 3 switches and they just wouldn't sit flush against the PCB. Might be because my Zeals are from a different round than yours but I don't think the variance should be that much. Maybe I'll just use different switches instead because my fingers are sore from putting in just a few switches.
have you cut the 2 small feet at the bottom of the switch? i did forgot once and it took little bit of force to seat the switch.


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Dystopia on Thu, 15 March 2018, 07:23:58
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk

Strange, I've spent the past 20 mins trying to force in like 3 switches and they just wouldn't sit flush against the PCB. Might be because my Zeals are from a different round than yours but I don't think the variance should be that much. Maybe I'll just use different switches instead because my fingers are sore from putting in just a few switches.
have you cut the 2 small feet at the bottom of the switch? i did forgot once and it took little bit of force to seat the switch.


Sent from my iPhone using Tapatalk

Should i be snipping those off? The PCB has holes for them so I thought it was fine to leave them one  :-X
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Thu, 15 March 2018, 08:05:25
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk

Strange, I've spent the past 20 mins trying to force in like 3 switches and they just wouldn't sit flush against the PCB. Might be because my Zeals are from a different round than yours but I don't think the variance should be that much. Maybe I'll just use different switches instead because my fingers are sore from putting in just a few switches.
have you cut the 2 small feet at the bottom of the switch? i did forgot once and it took little bit of force to seat the switch.


Sent from my iPhone using Tapatalk

Should i be snipping those off? The PCB has holes for them so I thought it was fine to leave them one  :-X
yes snap them off, those are for pcb mounted switches.


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 15 March 2018, 08:10:11
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk

Strange, I've spent the past 20 mins trying to force in like 3 switches and they just wouldn't sit flush against the PCB. Might be because my Zeals are from a different round than yours but I don't think the variance should be that much. Maybe I'll just use different switches instead because my fingers are sore from putting in just a few switches.
Is that for all switches?
you can cut that 2 pin on feet on bottom switches. PCB it's self support PCB mount switches but i think zeal have bigger feet pcb mount
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Dystopia on Thu, 15 March 2018, 12:13:54
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk

Strange, I've spent the past 20 mins trying to force in like 3 switches and they just wouldn't sit flush against the PCB. Might be because my Zeals are from a different round than yours but I don't think the variance should be that much. Maybe I'll just use different switches instead because my fingers are sore from putting in just a few switches.
Is that for all switches?
you can cut that 2 pin on feet on bottom switches. PCB it's self support PCB mount switches but i think zeal have bigger feet pcb mount

Yea, all switches are tight except for those on the spacebar row because that row has a lot more clearance. I'll do what you and the other guy recommended and cut off the extra legs and I'll see how it goes  :)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 15 March 2018, 12:16:35
Anyone tried using Zeals for this pcb? First time building one and they require so much more force to put in than an outemu switch so I'm wondering if it is safe to just force them in or I should use another switch.
i use aristotle in zealios housing, mine are easy to put dont need force. if youre using a plate check the bottom, you need to cut the plastic feet, maybe thats what making it hard to put..


Sent from my iPhone using Tapatalk

Strange, I've spent the past 20 mins trying to force in like 3 switches and they just wouldn't sit flush against the PCB. Might be because my Zeals are from a different round than yours but I don't think the variance should be that much. Maybe I'll just use different switches instead because my fingers are sore from putting in just a few switches.
Is that for all switches?
you can cut that 2 pin on feet on bottom switches. PCB it's self support PCB mount switches but i think zeal have bigger feet pcb mount

Yea, all switches are tight except for those on the spacebar row because that row has a lot more clearance. I'll do what you and the other guy recommended and cut off the extra legs and I'll see how it goes  :)

Be carefull when you solder it. sometimes switches tilt when it's soldered because those 2 extra legs gone.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ppp on Mon, 19 March 2018, 14:02:42
One last bump to see if anyone has an extra brass plate they'd like to trade/sell me for my ss one or if someone in the states is ordering and wants an ss one and would be willing to make a small profit for trading a brass one with me.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: darkslay3r on Mon, 19 March 2018, 22:14:40
So just saw this for the first time, obviously GB over. I understand there are spares? Are there? Whatís in the kit for what price and how could I acquire one?

Edit: would appreciate a Pm :)


Sent from my iPad using Tapatalk

you can PM SilentReader for extras, i think he has 40+ extras left


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: child on Wed, 21 March 2018, 01:58:30
Is there any way to program the PCB without Windows? I do not have access to a Windows machine.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: E_rik on Wed, 21 March 2018, 03:22:49
I found a solution here: https://www.reddit.com/r/MechanicalKeyboards/comments/64r1rg/help_how_to_port_boards_to_tmkqmk/ (https://www.reddit.com/r/MechanicalKeyboards/comments/64r1rg/help_how_to_port_boards_to_tmkqmk/)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: child on Wed, 21 March 2018, 04:51:40
Thanks, but did you actually try it? It supports some of Leeku's PCBs, but not YAS62 exactly. At least I don't see any mention of it at https://github.com/xauser/tmk_keyboard/tree/xauser/keyboard/l3
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: E_rik on Wed, 21 March 2018, 06:08:12
No, I am stil waiting for my PCB to arrive, so I did not try it yet. Also, I have Windows installed on a virtual machine on my Mac.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: teamrushpntball on Sat, 24 March 2018, 10:56:45
Just finished building mine and decided I do not like the wood case I had made.  Besides the Tina case are there any other options?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Sat, 24 March 2018, 11:01:07
Just finished building mine and decided I do not like the wood case I had made.  Besides the Tina case are there any other options?

SKBXX you can see thread here https://geekhack.org/index.php?topic=92403.new;topicseen#new

I think it will going to GB very soon
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ppp on Sat, 24 March 2018, 17:21:43
Just finished building mine and decided I do not like the wood case I had made.  Besides the Tina case are there any other options?

Are you Conus? I might be interested in buying your wooden case
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: babyphil on Sat, 24 March 2018, 22:06:56
Finally built mine. Navies and GMK 9009. LEDs are bright!
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Tue, 03 April 2018, 15:21:35
Quick question.

I'm currently looking for stabs for my incoming YAS :)
Going for a 6,25u space (so 1,5u / 1,5u, 6,25u / 1,25u, 1 / 1 / 1 bottom row), and most likely a split backspace, rest regular ansi.

Do I need pcb or plate mounted stabs?
And if I'm correct;
2u (left shift)
2u (enter)
6,25u (space)

That's it right? Assuming I'm going with a split backspace.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: vtachkov on Tue, 03 April 2018, 16:30:21
Are extras going to be shipped soon?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 03 April 2018, 17:03:58
Quick question.

I'm currently looking for stabs for my incoming YAS :)
Going for a 6,25u space (so 1,5u / 1,5u, 6,25u / 1,25u, 1 / 1 / 1 bottom row), and most likely a split backspace, rest regular ansi.

Do I need pcb or plate mounted stabs?
And if I'm correct;
2u (left shift)
2u (enter)
6,25u (space)

That's it right? Assuming I'm going with a split backspace.

Yep that's correct.
For PCB or Plate mount depend on what you like.
I use PCB mount for shift and enter, and Plate mount for spacebar.

Are extras going to be shipped soon?

Not yet. Currently on remaking plate.
I am ready to ship it last week but when i'm check it again to make sure everythings good before i ship, plate size just too large about 1cm unfortunatelly.
Hope end of this week plate ready.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Tue, 03 April 2018, 17:27:28
Quick question.

I'm currently looking for stabs for my incoming YAS :)
Going for a 6,25u space (so 1,5u / 1,5u, 6,25u / 1,25u, 1 / 1 / 1 bottom row), and most likely a split backspace, rest regular ansi.

Do I need pcb or plate mounted stabs?
And if I'm correct;
2u (left shift)
2u (enter)
6,25u (space)

That's it right? Assuming I'm going with a split backspace.

Yep that's correct.
For PCB or Plate mount depend on what you like.
I use PCB mount for shift and enter, and Plate mount for spacebar.

Are extras going to be shipped soon?

Not yet. Currently on remaking plate.
I am ready to ship it last week but when i'm check it again to make sure everythings good before i ship, plate size just too large about 1cm unfortunatelly.
Hope end of this week plate ready.

Good to hear extra's are close to getting shipped since my case is getting shipped this week as well :P

For the stabs, I can use both pcb AND plate mount, is that correct?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 03 April 2018, 17:30:08
Good to hear extra's are close to getting shipped since my case is getting shipped this week as well :P

For the stabs, I can use both pcb AND plate mount, is that correct?

Yep it's support both of them.
Just choose which one do you like  ;D
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: gr4v3m4n on Tue, 03 April 2018, 20:28:27
Quick question.

I'm currently looking for stabs for my incoming YAS :)
Going for a 6,25u space (so 1,5u / 1,5u, 6,25u / 1,25u, 1 / 1 / 1 bottom row), and most likely a split backspace, rest regular ansi.

Do I need pcb or plate mounted stabs?
And if I'm correct;
2u (left shift)
2u (enter)
6,25u (space)

That's it right? Assuming I'm going with a split backspace.

Yep that's correct.
For PCB or Plate mount depend on what you like.
I use PCB mount for shift and enter, and Plate mount for spacebar.

Are extras going to be shipped soon?

Not yet. Currently on remaking plate.
I am ready to ship it last week but when i'm check it again to make sure everythings good before i ship, plate size just too large about 1cm unfortunatelly.
Hope end of this week plate ready.

Good to hear extra's are close to getting shipped since my case is getting shipped this week as well :P

For the stabs, I can use both pcb AND plate mount, is that correct?
unless you got non universal plate like mine, plate and pcb mount are good to go :D
(https://uploads.tapatalk-cdn.com/20180404/be47102478e88231fbb67837e5e49e20.jpg)


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Che.R.Ry on Tue, 03 April 2018, 21:51:54
Finally done, my first ever custom board!
Thx silentreader for making this come true, love it so much  :-*
*Sorry for potato pic, dont have proper camera and poor photography skill lol
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ihalatch on Tue, 03 April 2018, 22:23:23
Finally done, my first ever custom board!
Thx silentreader for making this come true, love it so much  :-*
*Sorry for potato pic, dont have proper camera and poor photography skill lol

Which case is this? Looks great.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Che.R.Ry on Tue, 03 April 2018, 23:02:23
Finally done, my first ever custom board!
Thx silentreader for making this come true, love it so much  :-*
*Sorry for potato pic, dont have proper camera and poor photography skill lol

Which case is this? Looks great.
TINA YAS from kbdfans
Thx!
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: PlastikSchnittstelle on Tue, 10 April 2018, 16:22:06
FINALLY, I got the GB for my "alternative top-mount case" started!
this means more choice for silentreaders sweet YAS62 PCB.

-> SKB60-YAS GB (https://geekhack.org/index.php?topic=95113.0)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: teamrushpntball on Sun, 15 April 2018, 12:08:55
Configured my keyboard the first time, trying to go back and change led color a few weeks later I can't get it to connect.  Just repeated connection failed errors.  Any suggestions? 

I have:
Disconnected Keyboard
Reinstalled Software
Restarted PC
Repeat above a few times
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Sun, 15 April 2018, 14:30:12
Configured my keyboard the first time, trying to go back and change led color a few weeks later I can't get it to connect.  Just repeated connection failed errors.  Any suggestions? 

I have:
Disconnected Keyboard
Reinstalled Software
Restarted PC
Repeat above a few times
Do you use lastest firmware? and put usb cable on the back panel? because sometime i can't get to connect if use front panel usb
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: teamrushpntball on Sun, 15 April 2018, 20:51:21
Randomly working, swapped usb ports was apparently enough.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: mniels on Sun, 15 April 2018, 20:59:24
Please forgive me if this has been posted earlier in the thread, but what case are most people using?  Trying to decide between a standard and more "HHKB" type of layout, which obviously makes the case selection a little harder.  I have a cheap little translucent case that I will possibly use, but curious what others have done.  I have been out of the keyboard game long enough to know that there may be better options out there now.

Thanks for the input!
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ayamterbang on Sun, 15 April 2018, 21:05:49
Please forgive me if this has been posted earlier in the thread, but what case are most people using?  Trying to decide between a standard and more "HHKB" type of layout, which obviously makes the case selection a little harder.  I have a cheap little translucent case that I will possibly use, but curious what others have done.  I have been out of the keyboard game long enough to know that there may be better options out there now.

Thanks for the input!

You may checkk the GB of SKB60 case by plastikschnittstelle above for current available yas options.

Kbdfans from china used to supply Tina case made specifically for yas62.

Or you may build your own sandwich style.
Someone build and posted his creation on this thread.

Most people here (probably) grabbed tina (which I did), but as stated earlier. They're no longer produce it.


Hope it helps.


Sent from my SM-G930F using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ullr on Sun, 15 April 2018, 22:06:03
kbdfans still has a couple of cases in stock
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Sun, 15 April 2018, 23:49:15
Please forgive me if this has been posted earlier in the thread, but what case are most people using?  Trying to decide between a standard and more "HHKB" type of layout, which obviously makes the case selection a little harder.  I have a cheap little translucent case that I will possibly use, but curious what others have done.  I have been out of the keyboard game long enough to know that there may be better options out there now.

Thanks for the input!

Kbdfans sold about 30 Pcs for this PCB.
Someone made acrylic case for this.
And appreantly running right now is SKB60.
But you can use transculent universal case too.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Sun, 15 April 2018, 23:50:02
kbdfans still has a couple of cases in stock

They already gone.
Kbdfans just didn't update it yet on their website.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: odd on Tue, 17 April 2018, 19:04:12
I might need to by another PCB. Everything was working fine until a few days ago when the RGB backlighting is enabled it just flashes random colors or it seems like there is not enough juice since the RGB lights seems to blink on and off or have a ver faint color. I have tried different cables, different usb ports and different computers and the behavior is all the same.

This happen to anyone else?

help  :-[
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Draic on Thu, 19 April 2018, 01:02:30
any chance we might see a V2 with USB-C in the near future? :x

I really like the layout, but decided to not get anything mini-USB anymore
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: vtachkov on Thu, 19 April 2018, 18:43:15
Sent you a PM silent.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 19 April 2018, 22:14:27
I might need to by another PCB. Everything was working fine until a few days ago when the RGB backlighting is enabled it just flashes random colors or it seems like there is not enough juice since the RGB lights seems to blink on and off or have a ver faint color. I have tried different cables, different usb ports and different computers and the behavior is all the same.

This happen to anyone else?

help  :-[

Seems your smd led need to replace. Do you have picture of that?
I think i can send you another one but you need to pay shipping fee.
Contact me on telegram https://t.me/yasintahir
Or on  discord yas#5168 for fast respond.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 19 April 2018, 22:15:44
any chance we might see a V2 with USB-C in the near future? :x

I really like the layout, but decided to not get anything mini-USB anymore

Not really sure though.
But maybe i will do that together bundle with case this time.

Sent you a PM silent.

Replied  :thumb:
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: C7Kinetic on Fri, 20 April 2018, 00:08:21
any chance we might see a V2 with USB-C in the near future? :x

I really like the layout, but decided to not get anything mini-USB anymore

Not really sure though.
But maybe i will do that together bundle with case this time.

If you ever do a R2, I'm definitely hopping back in. This is literally my favorite layout  ;D
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: E_rik on Thu, 26 April 2018, 00:13:14
Any news about shipping the extras?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 26 April 2018, 00:44:15
Any news about shipping the extras?
It's already shipped, some people already get their PCB. Pm me to get your tracking number
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Thu, 03 May 2018, 17:03:32
Who can help me get the underglow working on my YAS? ;) I have everything up and running via Jigon, but can't get the RGB to work. No matter how hard I try When I first plugged in the pcb to see if it was working I had the blue fading underglow, however after building it never came back :( Btw, for those interested, build is as you understand complete and I have a typing video here:



(yes my nails are not the prettiest, excuse me for not having nail polish and biting my nails :P)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Sat, 05 May 2018, 18:28:02
Who can help me get the underglow working on my YAS? ;) I have everything up and running via Jigon, but can't get the RGB to work. No matter how hard I try When I first plugged in the pcb to see if it was working I had the blue fading underglow, however after building it never came back :( Btw, for those interested, build is as you understand complete and I have a typing video here:



(yes my nails are not the prettiest, excuse me for not having nail polish and biting my nails :P)

So Iíve checked multiple firmwareís, reset it, older versions of JigOn. Nothing :( how can I check if my pcb might be broken? (The leds at least.)


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: binnie on Mon, 07 May 2018, 01:52:07
I want to join this GB but I don't have any experience with importation (I live in USA). Would that 40 euro shipping estimation include import fees? Does DHL handle that kind of stuff? I think I have the money to spend on keyboard stuff right now but I just don't want to get shocked with customs charges when it arrives haha.

edit: commented in the wrong thread I had open aaaaaa ignore this.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Thu, 10 May 2018, 12:16:59
So even though Iím having some backlight problems, here is my build :) decided to go and try split space.

(https://uploads.tapatalk-cdn.com/20180510/eebeec3ae32ee57985f72d76d22fa452.jpg)


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: child on Mon, 14 May 2018, 14:59:56
I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Harms on Mon, 28 May 2018, 22:17:13
Are the extras being shipped?

I ordered an extra almost a month ago and have not received an email about shipping or anything.

Thanks.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 29 May 2018, 02:07:00
I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

Same problem with mine, i just found this option on qmk

Are the extras being shipped?

I ordered an extra almost a month ago and have not received an email about shipping or anything.

Thanks.

Updated tracking number on your paypal invoices.
Package already at your country and ready to pickup
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Harms on Tue, 29 May 2018, 02:36:47
Thank you  :D
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: child on Tue, 29 May 2018, 14:12:06
I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

Same problem with mine, i just found this option on qmk

Is it possible to flash this board with qmk?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Tue, 29 May 2018, 14:14:49
I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

Same problem with mine, i just found this option on qmk

Is it possible to flash this board with qmk?
Theorically yes, because some old board from leeku have qmk firmware available. But this controller use by leeku easy to brick hard to port to qmk.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: E_rik on Tue, 29 May 2018, 14:27:13
I have some questions about Leeku firmware/Jigon tool:
* is it possible to switch some layer on momentarily other than Fn layer? There are L0 to L2, but from what I see they can only be switched on "permanently", and I want to switch them on just as long as the layer-switch key is held down
* I'd like to have additional modifier key in addition to Ctrl/Shift/Alt, like Hyper (on Linux). Is it possible to set it up?
* is it possible to have a double-role tap/press key? I think SpaceFn is an example of such a key

These are not supported by JigOn. But you should be able to achieve this when you install TMK firmware. You can get it here: https://github.com/xauser/tmk_keyboard/tree/xauser/keyboard/l3 (https://github.com/xauser/tmk_keyboard/tree/xauser/keyboard/l3).

I am busy setting it up on my YAS62. It was difficult to set up, but most things work now. The only problem left for me is that I cannot stop the annoying RGB lights. Has anyone else tried TMK on their YAS62?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ihalatch on Fri, 01 June 2018, 00:30:22
(http://i.imgur.com/tcRF0RQ.jpg) (https://imgur.com/tcRF0RQ)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Fri, 01 June 2018, 09:10:21
(http://i.imgur.com/tcRF0RQ.jpg) (https://imgur.com/tcRF0RQ)
You seem to be missing some parts :P what case are you gonna use? SKB maybe? Black would look sick with those caps :O


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ihalatch on Fri, 01 June 2018, 21:01:09
(http://i.imgur.com/tcRF0RQ.jpg) (https://imgur.com/tcRF0RQ)
You seem to be missing some parts :P what case are you gonna use? SKB maybe? Black would look sick with those caps :O


Sent from my iPhone using Tapatalk

I spent my entire yearly keyboard allowance on the JetFire and Xondat's 280 + 220 while waiting for the SKB. I'm waiting for the right time to beg the boss home to allow me to indulge myself once again with my first German custom keyboard :)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: 112227 on Fri, 22 June 2018, 02:18:37
What stabilizers are required for the plate? GMK screw-in won't fit. :-[
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ihalatch on Fri, 22 June 2018, 02:31:22
They fit mine.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: 112227 on Tue, 26 June 2018, 20:12:39
Just soldered mine up. Every link I find is dead for JigOn, can anyone point me in the right direction?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ihalatch on Wed, 27 June 2018, 02:38:55
how to bootload yes62?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Thu, 28 June 2018, 01:59:05
how to bootload yes62?

Use jigon just click keyboard-connect

Just soldered mine up. Every link I find is dead for JigOn, can anyone point me in the right direction?

Try this http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787 (http://kbdlab.co.kr/index.php?mid=board_sw&document_srl=2702787)

Use jigon_170419.zip
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: davisthegreat on Sat, 02 February 2019, 18:49:30
I am just now getting around to building my Yas62. My Plate is weird, it does'nt look like any of the plates im seeing or the on the yas62 case/ bag. I am having an issue with stabilizers. It looks like my plate only supports Plate mount stabs? Did i miss or forget something?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Koriko on Sat, 02 February 2019, 18:51:26
The plate is a very tight fit around the stabilizers.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: yasintahir on Sat, 02 February 2019, 20:14:37
I am just now getting around to building my Yas62. My Plate is weird, it does'nt look like any of the plates im seeing or the on the yas62 case/ bag. I am having an issue with stabilizers. It looks like my plate only supports Plate mount stabs? Did i miss or forget something?

I guess you have plate with 6.25u stabilizer option. You need plate mount stab for that plate
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: z28497952 on Fri, 19 April 2019, 10:47:49
Excuse me, can I still buy yas62 PCB board now?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: ChitownM2 on Fri, 19 April 2019, 15:37:20
Excuse me, can I still buy yas62 PCB board now?

only second hand. Pretty positive these are long gone.
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: z28497952 on Fri, 19 April 2019, 21:39:43
Excuse me, can I still buy yas62 PCB board now?

only second hand. Pretty positive these are long gone.

What a pity news...
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: realxmlforce on Sat, 20 April 2019, 06:36:22
Another thing: Does anyone know if there is a QMK port for the YAS62 PCB? Or can someone tell if the effort necessary for doing a port is somewhat manageable? (Without cs degree)
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Sat, 20 April 2019, 11:11:24
Excuse me, can I still buy yas62 PCB board now?

only second hand. Pretty positive these are long gone.

What a pity news...

Well, you could find 4 more people and get them made for you :P


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: mniels on Sun, 25 August 2019, 18:51:25
It has been a while since I have seen any posts about cases (never got around to building mine and considering it now.)  It looks like a standard 60% case will work, but what if you do not want to go with a standard layout?  I think that kbdfans had some a long time ago.....any ideas on current options?
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: Poesjuh on Mon, 26 August 2019, 03:07:05
It has been a while since I have seen any posts about cases (never got around to building mine and considering it now.)  It looks like a standard 60% case will work, but what if you do not want to go with a standard layout?  I think that kbdfans had some a long time ago.....any ideas on current options?
Keep an eye out on Mechmarket for SKB cases, they have been shipped and there could be people selling theirs.

(https://uploads.tapatalk-cdn.com/20190826/510f0691f6ad36d5c040a66a90ea0488.jpg)


Sent from my iPhone using Tapatalk
Title: Re: [GB] YAS62 | Shipped 100% (EXTRAS AVAILABLE)
Post by: PvtSkittles on Fri, 06 December 2019, 17:35:37
Does anyone have any idea how to unbrick my yas62? It was working fine for 3 or so weeks and I came back to it one evening showing USB device not recognized and the swirling colors of death - the yas62 didn't come as part of this GB but with my SKB. I did a little digging where I might have to reflash my bootloader using an ISP but ideally if I don't have to do that it would be nice... Any idea of how this might have happened in the first place? Just seems weird that it was working fine and then not out of the blue