geekhack

geekhack Marketplace => Group Buys and Preorders => Topic started by: xondat on Wed, 17 January 2018, 00:47:24

Title: [GB] Noxary X60 R (Complete)
Post by: xondat on Wed, 17 January 2018, 00:47:24
(https://i.imgur.com/aYR3As7.png)

(https://i.imgur.com/jCXw4gB.png)

(https://i.imgur.com/f2On1r1.png)

(https://i.imgur.com/7qZilLB.png)

Group Buy Information:
Information:
Specification:
Price (excluding fees + shipping):
Colors:
Shipping:

I'll be shipping with DHL Express again, with most packages taking 1-3 days for a good price. Your local taxes and fees apply. Shipping will be invoiced for when the cases arrive. Estimates for shipping are as follows: United States - $40; United Kingdom - $20; Europe - $30-35; Asia - $50-60.

Deadline & Lead Times:

Will be allowing 48 hours for payment before spot is reraffled. Once the order has been submitted to the factory, it will take about 8-10 weeks to arrive.
Title: Re: [GB] Noxary X60 R
Post by: xondat on Wed, 17 January 2018, 00:47:37
vadurr

ctzn_voyager

exanile_tabasco

(https://i.imgur.com/oqk1K7a.jpg)

oatmicro

___q

megaforce93

(https://images-ext-2.discordapp.net/external/NcxbWkkKqKFTCCfQMQm8kmYhxBIDpNYNdL6r-RPBjY4/https/i.imgur.com/eRxORe8.jpg?width=1442&height=661)

Hawk

frostbyte

(https://geekhack.org/index.php?action=dlattach;topic=93572.0;attach=216040;image)

poolside

nug

alveeno

Captainbuttmonkey

(https://i.lensdump.com/i/WrCKN0.jpg)

kmba

Rafa_m

(http://i.imgur.com/uWom1Qu.jpg)

DreLLin

dyrdevil

hpe1000

(https://i.imgur.com/vewxE9c.jpg)

kekstee

(https://i.imgur.com/lwduJ3S.jpg)

lunr

(https://geekhack.org/index.php?action=dlattach;topic=93572.0;attach=215833;image)

regionfree

(https://cdn.discordapp.com/attachments/438429095303315456/561395341748862976/image0.jpg)
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: ghostjuggernaut on Wed, 17 January 2018, 17:42:31
Approval bump  :thumb:

As always, caveat emptor (https://geekhack.org/index.php?topic=36773.0).
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Captainbuttmonkey on Wed, 17 January 2018, 18:08:07
Too many great 60/65%'s around at the moment. I'm going to have to make some tough choices haha, looks great anyway dude.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: swimmingbird on Wed, 17 January 2018, 18:22:01
Won't be entering as I already have an X60, but if you are thinking about entering I would highly recommend this board

The nicest 60% I own by a stretch
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: exanile_tabasco on Wed, 17 January 2018, 18:39:41
hype hype hype get in on it if you want a quality 60!
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: pr0ximity on Wed, 17 January 2018, 18:41:23
Sick board, jealous of those who get in. GL all.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: crtexcnndrm99 on Wed, 17 January 2018, 19:50:58
Awesome job xondat. Congrats to the lucky people who will be getting this one  :thumb:
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: DJSwayde on Wed, 17 January 2018, 19:59:55
Amazing. Really hope I get it.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xosk on Wed, 17 January 2018, 20:02:20
Is this FCFS?
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: kmba on Wed, 17 January 2018, 20:07:13
Is this FCFS?

Group Buy Information:
1/20/2018
2PM - 8PM EST
6 Hour Raffle
20 Slots Available
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Wed, 17 January 2018, 21:25:07
Too many great 60/65%'s around at the moment. I'm going to have to make some tough choices haha, looks great anyway dude.

Won't be entering as I already have an X60, but if you are thinking about entering I would highly recommend this board

The nicest 60% I own by a stretch

hype hype hype get in on it if you want a quality 60!

Sick board, jealous of those who get in. GL all.

Amazing. Really hope I get it.

Awesome job xondat. Congrats to the lucky people who will be getting this one  :thumb:

Thanks for the support!

Is this FCFS?

No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: ricrackem on Wed, 17 January 2018, 21:29:55
Nice, stoked for a chance. Will all layouts be available (Classic, wkl, hhkb)?

Sent from my SM-G950U1 using Tapatalk

Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: dyrdevil on Wed, 17 January 2018, 21:32:45
Really Hoping I get a spot! Happy to see that price too.  Thanks!
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: The_judge_168 on Wed, 17 January 2018, 22:19:29
Calendar set, excited for a chance at one
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Lotsati on Thu, 18 January 2018, 01:22:32
$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Vadurr on Thu, 18 January 2018, 01:44:06
I'm stoked ^__^
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: crtexcnndrm99 on Thu, 18 January 2018, 01:57:53
$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol

This. Exactly where Iím at too right now ;)


Sent from my iPhone using Tapatalk
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: amnesia0287 on Thu, 18 January 2018, 02:01:25
$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol

This. Exactly where Iím at too right now ;)


Sent from my iPhone using Tapatalk

So say we all!
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: hhkbp2 on Thu, 18 January 2018, 03:34:28
All in.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: oatmicro on Thu, 18 January 2018, 04:24:24
I'm here

waiting

to join
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: kekstee on Thu, 18 January 2018, 05:44:13
Haha, damn. Just as I'm debating in which of the upcoming 60s to put my Nixdorfs this thing comes along. Well, crossing my fingers.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: bminhz on Thu, 18 January 2018, 08:26:11
Good luck all participants....I need one as well!
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: dyrdevil on Thu, 18 January 2018, 11:13:51
Really Hoping I get a spot! Happy to see that price too.  Thanks!

$440 shipped to the US for everything...  :-X This will be one of those cases where I'll want to win and lose the raffle at the same time lol

Yeah, on first look I thought the plate was included for $340.. oh well. Still hoping I get in.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Thu, 18 January 2018, 11:25:26
Yeah, sorry about the price. Low quantity means it'll be higher. I don't plan to do these small runs as a usual.

I split the case/plate price as standard as people do get multiple.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: MaNiFeX on Thu, 18 January 2018, 12:13:00
No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.

This is UK time, correct?

Thank You!
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Thu, 18 January 2018, 12:16:16
No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.

This is UK time, correct?

Thank You!

EST is Eastern Standard Time, so East Coast USA. 7PM to 1AM UTC/GMT. :p
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: kekstee on Thu, 18 January 2018, 13:10:53
Are you planning to run this design in a more accessible gb in the future btw?
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Captainbuttmonkey on Thu, 18 January 2018, 13:27:54
Are you planning to run this design in a more accessible gb in the future btw?

From IC: 'This is not X60 V2. That'll be ran in the future, so don't worry if you miss this one.'

And yes I believe he said V2 will be a larger run with some slight aesthetic differences if I'm not mistaken? I think it was around 50 but I could very well be pulling that out my ass.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Thu, 18 January 2018, 13:35:00
Are you planning to run this design in a more accessible gb in the future btw?

Not this exact design.

V2 will feature:
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: MaNiFeX on Thu, 18 January 2018, 15:30:42
No, there will be a Google Form open from 2PM to 8PM EST on Saturday. Simply fill the form in, and when it's closed, find out if you get a slot.

This is UK time, correct?

Thank You!

EST is Eastern Standard Time, so East Coast USA. 7PM to 1AM UTC/GMT. :p

Reading is good.  Derp!  Thank you!   :p
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: keebweeb on Thu, 18 January 2018, 19:16:43
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: kmba on Thu, 18 January 2018, 19:48:33
probably hhkb only layout.. best layout anyway.  adapt or die.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Thu, 18 January 2018, 20:16:24
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?

PCB will basically be the same, yes.

Plate will support this:

(https://i.imgur.com/4J8UCxw.png)
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: amnesia0287 on Thu, 18 January 2018, 23:00:24
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?

PCB will basically be the same, yes.

Plate will support this:

Show Image
(https://i.imgur.com/4J8UCxw.png)


Wait, it has a glorious fixed bottom row plate? For some reason I want it more now.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Thu, 18 January 2018, 23:12:08
Looks good!

Will the PCB being offered be the USB-C QMK-compatible one mentioned in the IC and otherwise be similar to the 268 PCB?

Also, will the plate support a universal layout or will it be the HHKB style one shown in the renders?

PCB will basically be the same, yes.

Plate will support this:

Show Image
(https://i.imgur.com/4J8UCxw.png)


Wait, it has a glorious fixed bottom row plate? For some reason I want it more now.

Between having extra holes in the plate and my lack of care for 1.25u bottom row, this is the result :))

Seriously considering having that as the only bottom row on the PCB too. Clean PCBs are the best. Would love to have a single layout PCB + plate combo  :'(
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: finalarcadia on Thu, 18 January 2018, 23:17:50
Quote

Between having extra holes in the plate and my lack of care for 1.25u bottom row, this is the result :))

Seriously considering having that as the only bottom row on the PCB too. Clean PCBs are the best. Would love to have a single layout PCB + plate combo  :'(

Do it :p Should offer HHKB layout only plate/pcb, being the most popular and best layout and all
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: amnesia0287 on Fri, 19 January 2018, 00:12:38
Quote

Between having extra holes in the plate and my lack of care for 1.25u bottom row, this is the result :))

Seriously considering having that as the only bottom row on the PCB too. Clean PCBs are the best. Would love to have a single layout PCB + plate combo  :'(

Do it :p Should offer HHKB layout only plate/pcb, being the most popular and best layout and all

Meh, I prefer a normal backspace for aesthetic reasons, but the rest of it I totally use an hhkb layout.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: WhateverZYX on Fri, 19 January 2018, 03:49:42
I'd pay additionally for a plate that only supports HHKB-layout. Avoiding those see-through Swiss cheese plates would definitely be worth it.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: amnesia0287 on Fri, 19 January 2018, 03:51:15
I'd pay additionally for a plate that only supports HHKB-layout. Avoiding those see-through Swiss cheese plates would definitely be worth it.

That I will agree with. Was one of the selling points on the LZ s x h. Having plates cut to my specific layout is naic
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Fri, 19 January 2018, 05:10:06
I would but itíd raise the prize, and Iím wanting to keep this simple.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: kmba on Fri, 19 January 2018, 05:55:49
Can you poll the people that end up winning and if no one wants iso compatibility, get rid of that God awful huge hole in the plate.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: fatpolomanjr on Fri, 19 January 2018, 06:02:42
HHKB layout is seriously good.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Fri, 19 January 2018, 11:02:51
Can you poll the people that end up winning and if no one wants iso compatibility, get rid of that God awful huge hole in the plate.

Yeah I'll do it for all layout options left. I suspect that split rshift/backspace will stay and lshift will go.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: RealLaugh on Fri, 19 January 2018, 13:10:15
Can you poll the people that end up winning and if no one wants iso compatibility, get rid of that God awful huge hole in the plate.

Yeah I'll do it for all layout options left. I suspect that split rshift/backspace will stay and lshift will go.

Is that confirmed that ISO is out of the question or will it be an option for the plate?
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: kmba on Fri, 19 January 2018, 13:16:54
I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Fri, 19 January 2018, 14:26:59
I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.

Spot on.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: RealLaugh on Fri, 19 January 2018, 14:52:58
I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.

I think it will remain if winners want support. If none of the 20 people want it, sayonara baby.

Spot on.

ok makes sense in this case to do what the people who won the raffle want, thanks for clarifying :)
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: dyrdevil on Fri, 19 January 2018, 22:13:26
xondat,

2 questions if you have time :

1) will the brass plate be mirror finish only?  I really like the look of the brass plate from the previous run.

2) do you have any pics you could post of the dark grey and silver finishes next to each other? Or maybe of the silver next to a classic beige/9009 colorway? 
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Fri, 19 January 2018, 22:22:05
xondat,

2 questions if you have time :

1) will the brass plate be mirror finish only?  I really like the look of the brass plate from the previous run.

2) do you have any pics you could post of the dark grey and silver finishes next to each other? Or maybe of the silver next to a classic beige/9009 colorway?


(http://i.imgur.com/rwqp3Au.jpg)
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: dyrdevil on Fri, 19 January 2018, 22:41:26
xondat,

2 questions if you have time :

1) will the brass plate be mirror finish only?  I really like the look of the brass plate from the previous run.

2) do you have any pics you could post of the dark grey and silver finishes next to each other? Or maybe of the silver next to a classic beige/9009 colorway?

  • Which brass plates are you referring to? I've only done brass for 268 and they're mirror (the same as this).
  • Dark gray with 9009 below. I don't have a silver case to compare, but there are many on Google etc.

Show Image
(http://i.imgur.com/rwqp3Au.jpg)


Thanks.  I thought the following was a brass plate, sorry if Iím misinformed
Also thanks for the pic. I thought that may have been silver.  The dark grey seems super dark in some pics, and almost silver in others depending on lighting.

finally got mine built. some quick pics:

Show Image
(http://i.imgur.com/snoNJyC.jpg)

Show Image
(http://i.imgur.com/mGOTvYl.jpg)

Show Image
(http://i.imgur.com/zHe3wD5.jpg)

Show Image
(http://i.imgur.com/8KNhEb0.jpg)

Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: lunr on Fri, 19 January 2018, 23:03:39
Just wondering you mentioned polycarb plate in the IC. Are you still going to offer that as a plate material?
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Fri, 19 January 2018, 23:13:36
Thanks.  I thought the following was a brass plate, sorry if Iím misinformed
Also thanks for the pic. I thought that may have been silver.  The dark grey seems super dark in some pics, and almost silver in others depending on lighting.

finally got mine built. some quick pics:

Show Image
(http://i.imgur.com/snoNJyC.jpg)

Show Image
(http://i.imgur.com/mGOTvYl.jpg)

Show Image
(http://i.imgur.com/zHe3wD5.jpg)

Show Image
(http://i.imgur.com/8KNhEb0.jpg)


Oh I see. It's the gold aluminum plate, they came out pretty close to rose golden.

I've asked for the dark gray to be darker in the 268 run, and will keep the same thing going with these. X60 dark gray was super nice, so should be closer to that than the sample.

Just wondering you mentioned polycarb plate in the IC. Are you still going to offer that as a plate material?

I did? Probably didn't mean to. I doubt I will unless there is suddenly significant interest.

Mounting will stay the same for when I release X60 V2, so plates with more variety will be available then.
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Vadurr on Sat, 20 January 2018, 01:01:52
Thanks.  I thought the following was a brass plate, sorry if Iím misinformed
Also thanks for the pic. I thought that may have been silver.  The dark grey seems super dark in some pics, and almost silver in others depending on lighting.

finally got mine built. some quick pics:

Show Image
(http://i.imgur.com/snoNJyC.jpg)

Show Image
(http://i.imgur.com/mGOTvYl.jpg)

Show Image
(http://i.imgur.com/zHe3wD5.jpg)

Show Image
(http://i.imgur.com/8KNhEb0.jpg)


Oh I see. It's the gold aluminum plate, they came out pretty close to rose golden.

I've asked for the dark gray to be darker in the 268 run, and will keep the same thing going with these. X60 dark gray was super nice, so should be closer to that than the sample.

Just wondering you mentioned polycarb plate in the IC. Are you still going to offer that as a plate material?

I did? Probably didn't mean to. I doubt I will unless there is suddenly significant interest.

Mounting will stay the same for when I release X60 V2, so plates with more variety will be available then.

A darker gray...Now I'm torn between black or dark gray :eek:
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: dyrdevil on Sat, 20 January 2018, 10:54:35
Will pcb be white b.face?
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Sat, 20 January 2018, 11:04:12
Will pcb be white b.face?

No, will be like this:

(https://i.imgur.com/nS4Xqzk.jpg)
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Captainbuttmonkey on Sat, 20 January 2018, 11:17:21
Just noticed in the OP I think you may have accidentally linked the supported layouts for the 268 by mistake
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: xondat on Sat, 20 January 2018, 11:20:33
Just noticed in the OP I think you may have accidentally linked the supported layouts for the 268 by mistake

Haha thanks. Just organizing everything :))
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Captainbuttmonkey on Sat, 20 January 2018, 11:23:23
Just noticed in the OP I think you may have accidentally linked the supported layouts for the 268 by mistake

Haha thanks. Just organizing everything :))

No worries  :p, not that I'm eagerly counting down till 7 or anything even though it's a raffle haha
Title: Re: [GB] Noxary X60 R (Opens 1/20)
Post by: Vadurr on Sat, 20 January 2018, 11:59:37
Will pcb be white b.face?

No, will be like this:

Show Image
(https://i.imgur.com/nS4Xqzk.jpg)


Oh man! A thick acrylic plate would make this look extra bombdiggity!
Title: Re: [GB] Noxary X60 R (Open)
Post by: xondat on Sat, 20 January 2018, 13:02:08
Raffle form:

https://goo.gl/forms/w6jyzgMtB2i6WsB82

:-*
Title: Re: [GB] Noxary X60 R (Open)
Post by: ns90 on Sat, 20 January 2018, 13:08:35
I think the KLE link is a bit borked.
Title: Re: [GB] Noxary X60 R (Open)
Post by: xondat on Sat, 20 January 2018, 13:11:09
I think the KLE link is a bit borked.

Yeah my bad, seemed to work some times and then it didn't. Try incognito, otherwise just make one from scratch :)
Title: Re: [GB] Noxary X60 R (Open)
Post by: kekstee on Sat, 20 January 2018, 13:11:27
Had to use chromium for that one.

Oh well, here's hoping. Good deal inside EU.
Title: Re: [GB] Noxary X60 R (Open)
Post by: ns90 on Sat, 20 January 2018, 13:12:41
I think the KLE link is a bit borked.

Yeah my bad, seemed to work some times and then it didn't. Try incognito, otherwise just make one from scratch :)

Thanks! Incognito did the trick.
Title: Re: [GB] Noxary X60 R (Open)
Post by: xosk on Sat, 20 January 2018, 13:16:40
Raffle form:

https://goo.gl/forms/w6jyzgMtB2i6WsB82

:-*

Heh, can we just out "Exactly like Topre HHKB" for KLE?   ^-^
Title: Re: [GB] Noxary X60 R (Open)
Post by: Captainbuttmonkey on Sat, 20 January 2018, 13:16:55
I think the KLE link is a bit borked.

Yeah my bad, seemed to work some times and then it didn't. Try incognito, otherwise just make one from scratch :)

Thanks! Incognito did the trick.

Seemed to work perfectly if copy and pasted but not if clicked =S
Title: Re: [GB] Noxary X60 R (Open)
Post by: Spaghetti on Sat, 20 January 2018, 13:17:50
Fingers crossed...
Title: Re: [GB] Noxary X60 R (Open)
Post by: ns90 on Sat, 20 January 2018, 13:18:26
I think the KLE link is a bit borked.

Yeah my bad, seemed to work some times and then it didn't. Try incognito, otherwise just make one from scratch :)

Thanks! Incognito did the trick.

Seemed to work perfectly if copy and pasted but not if clicked =S

Yeah I had tried that to no avail. But it did work when I pasted it in incognito.
Title: Re: [GB] Noxary X60 R (Open)
Post by: kekstee on Sat, 20 January 2018, 13:19:10
If I think about it I would drop regular shift/bs in case this turns out to be HHKB only.
Title: Re: [GB] Noxary X60 R (Open)
Post by: amnesia0287 on Sat, 20 January 2018, 13:20:59
If I think about it I would drop regular shift/bs in case this turns out to be HHKB only.

Regular backspace is life.
Title: Re: [GB] Noxary X60 R (Open)
Post by: MMKB on Sat, 20 January 2018, 13:24:19
Submitted one for a black HHKB case!  :thumb:  For those who don't want to fiddle with KLE:

(https://i.imgur.com/ttcbHiU.png)
Title: Re: [GB] Noxary X60 R (Open)
Post by: xondat on Sat, 20 January 2018, 13:24:39
Would like to make this clear here, and I will in the form:

YOU NEED AT LEAST 1 PLATE.

If you have chosen no plates, redo your form. Your responses have been deleted.
Title: Re: [GB] Noxary X60 R (Open)
Post by: DreLLin on Sat, 20 January 2018, 13:28:26
Entered for a dark grey 60%. Good luck everyone  ;D
Title: Re: [GB] Noxary X60 R (Open)
Post by: ctzn_voyager on Sat, 20 January 2018, 17:03:16
Submitted one for a black HHKB case!  :thumb:  For those who don't want to fiddle with KLE:

Show Image
(https://i.imgur.com/ttcbHiU.png)


Anyone have an imgur link for WKL? The form is not accepting any of my links.

NVM, had to get the direct link rather than a share link.
Title: Re: [GB] Noxary X60 R (Open)
Post by: boxfrommoon on Sat, 20 January 2018, 17:11:18
Submitted one for a black HHKB case!  :thumb:  For those who don't want to fiddle with KLE:

Show Image
(https://i.imgur.com/ttcbHiU.png)


Anyone have this for WKL? I've been out with the my family all day and couldn't make a ****ing entire layout on my phone walking around, thought there would be default options.

NVM, the form wouldn't even accept my imgur link so I'm ****ed anyway.

Try this one: https://i.imgur.com/0DoD6XS.jpg
Title: Re: [GB] Noxary X60 R (Open)
Post by: ctzn_voyager on Sat, 20 January 2018, 17:15:06
Submitted one for a black HHKB case!  :thumb:  For those who don't want to fiddle with KLE:

Show Image
(https://i.imgur.com/ttcbHiU.png)


Anyone have this for WKL? I've been out with the my family all day and couldn't make a ****ing entire layout on my phone walking around, thought there would be default options.

NVM, the form wouldn't even accept my imgur link so I'm ****ed anyway.

Try this one: https://i.imgur.com/0DoD6XS.jpg

Thanks, I figured it out (I think) but I'm not sure my layout is entirely correct. Appreciate the quick help!
Title: Re: [GB] Noxary X60 R (Open - Last 30 Minutes)
Post by: xondat on Sat, 20 January 2018, 18:31:29
Open for the final 30 minutes, make sure not to miss it if you want a chance :thumb:
Title: Re: [GB] Noxary X60 R (Closed - Invoices Going Out)
Post by: xondat on Sat, 20 January 2018, 19:07:10
Closed!

Thanks for all the submissions. I'm going to start sending invoices out. :-*
Title: Re: [GB] Noxary X60 R (Closed - Invoices Going Out)
Post by: alveeno on Sat, 20 January 2018, 19:13:15
Can we get some stats? How many people entered? :)
Title: Re: [GB] Noxary X60 R (Closed - Invoices Going Out)
Post by: regionfree on Sat, 20 January 2018, 19:15:03
Made it in, I hope :D
Title: Re: [GB] Noxary X60 R (Closed - Invoices Going Out)
Post by: ctzn_voyager on Sat, 20 January 2018, 19:38:20
Paid!
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: amnesia0287 on Sat, 20 January 2018, 19:42:41
No soup for me. I am both sad and relieved :P
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: ___q on Sat, 20 January 2018, 19:45:27
In and paid :thumb:
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: regionfree on Sat, 20 January 2018, 19:46:03
good god, I had mixed reactions when I got the invoice, as I asked for extra plates, stabs, and pcbs. but still settled it, nonetheless :D very happy I got in! WKL 60, here we go!
Title: Re: [GB] Noxary X60 R (Closed - Invoices Going Out)
Post by: MMKB on Sat, 20 January 2018, 19:47:27
Paid!

Paid! Hope I'm right about the color choice. Your black X60 R1 is stunning.
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: xondat on Sat, 20 January 2018, 19:48:57
All invoices are now out. I hope you got lucky! If not, then I can only apologize.

Everyone has 48 hours to pay their invoices. I'll be cancelling and re-raffling if any go unpaid.

Can we get some stats? How many people entered? :)

Generally don't but why not.

Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: regionfree on Sat, 20 January 2018, 19:56:30
This is the first time i've won a slot in GB raffle :D
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: kekstee on Sat, 20 January 2018, 19:58:23
Whew, slipped in. Went with the dark grey brass HHKB majority it seems.

Did we manage to kill ISO enter btw? (and split left shift)

Prag would be the German variant of Prague.
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: DreLLin on Sat, 20 January 2018, 20:02:39
Invoice paid  :thumb:

Whew, slipped in. Went with the dark grey brass HHKB majority it seems.

Did we manage to kill ISO enter btw? (and split left shift)

Prag would be the German variant of Prague.

Took 60% with ISO layout so you can blame me everytime looking at your plate  ;D
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: kekstee on Sat, 20 January 2018, 20:04:55
Curse you dreLLin. I might drop a brass weight near your foot at the next ffm meetup. ;)
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: boxfrommoon on Sun, 21 January 2018, 07:35:36
Congratulations everyone who won! Sadly I had no luck this time..

xondat any estimations when are you going to be running the V2? And is it also going to be in raffle format?
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: kmba on Sun, 21 January 2018, 09:08:07
Really DreLLin? Like... Really???? :-\
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: xondat on Sun, 21 January 2018, 09:17:52
Congratulations everyone who won! Sadly I had no luck this time..

xondat any estimations when are you going to be running the V2? And is it also going to be in raffle format?

Maybe next time ;)

After 280/220, which is after 268... So June/July seems about right.

Really DreLLin? Like... Really???? :-\

He's not the only person to ruin the plates :'(
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: Vadurr on Sun, 21 January 2018, 10:28:45
Just to clarify, will this dark gray be the same as the previous run, or darker?
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: xondat on Sun, 21 January 2018, 11:33:38
Just to clarify, will this dark gray be the same as the previous run, or darker?

I want it as close to X60 V1 as possible :)
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: dyrdevil on Sun, 21 January 2018, 12:18:11
Paid! There goes my PayPal balance  :-X.

Super happy for this beautiful board to be my first custom after several years of salivating over high end boards.

In for a silver HHKB , brass plate.. gonna stick GMK 9009 on it.
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: MMKB on Sun, 21 January 2018, 13:11:29
After 280/220, which is after 268... So June/July seems about right.

Wow, would you drop a hint of the 280 and 220?

Also, speaking of the surface of the case, the R1 X60 has a rather reflective and smooth surface which is cool. A more matte finish is also nice and reflects the light more uniformly. (https://imgur.com/a/gG0Yu X60 vs Viper) Since this is a new factory, do you have any specific preference?
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: amnesia0287 on Sun, 21 January 2018, 13:17:32
After 280/220, which is after 268... So June/July seems about right.

Wow, would you drop a hint of the 280 and 220?

Also, speaking of the surface of the case, the R1 X60 has a rather reflective and smooth surface which is cool. A more matte finish is also nice and reflects the light more uniformly. (https://imgur.com/a/gG0Yu X60 vs Viper) Since this is a new factory, do you have any specific preference?

280/220 is TKL/Numpad
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: amnesia0287 on Sun, 21 January 2018, 13:18:12
Paid! There goes my PayPal balance  :-X.

Super happy for this beautiful board to be my first custom after several years of salivating over high end boards.

In for a silver HHKB , brass plate.. gonna stick GMK 9009 on it.

Grats and good choice, that's what I wanted too ;P
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: dyrdevil on Sun, 21 January 2018, 15:11:59
Paid! There goes my PayPal balance  :-X.

Super happy for this beautiful board to be my first custom after several years of salivating over high end boards.

In for a silver HHKB , brass plate.. gonna stick GMK 9009 on it.

Grats and good choice, that's what I wanted too ;P


Thanks! Glad to hear you think itís a good combo.  Sounds like v2 is not too far off and maybe be even sexier, good luck!
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: exanile_tabasco on Sun, 21 January 2018, 16:43:24
yeaaaa boiiiiiiiii here we go

thanks to everyone who showed their support to make this happen  :)  knowing xondat there will be plenty more projects down the pipeline for everyone to get in on
Title: Re: [GB] Noxary X60 R (Placing Order)
Post by: xondat on Sun, 21 January 2018, 20:30:11
After 280/220, which is after 268... So June/July seems about right.

Wow, would you drop a hint of the 280 and 220?

Also, speaking of the surface of the case, the R1 X60 has a rather reflective and smooth surface which is cool. A more matte finish is also nice and reflects the light more uniformly. (https://imgur.com/a/gG0Yu X60 vs Viper) Since this is a new factory, do you have any specific preference?

(https://i.imgur.com/HMZgU0J.png)

(https://i.imgur.com/zB52A4q.png)

Hard to say without seeing production 268s, I don't really mind too much as long as the quality is good.



Update on the remaining invoices:

All are now paid, so I'll work towards confirming all orders and then submit it :-*

Thanks all.
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: xondat on Mon, 22 January 2018, 12:12:04
I'll be putting a spreadsheet up later of all the configurations of the slots so that everyone can confirm they're correct. Expect it within the next 4-6 hours :p
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: Puddsy on Tue, 23 January 2018, 02:06:29
After 280/220, which is after 268... So June/July seems about right.

Wow, would you drop a hint of the 280 and 220?

Also, speaking of the surface of the case, the R1 X60 has a rather reflective and smooth surface which is cool. A more matte finish is also nice and reflects the light more uniformly. (https://imgur.com/a/gG0Yu X60 vs Viper) Since this is a new factory, do you have any specific preference?

a more matte finish is often a mark of lower quality anodizing

basically, good anodizing should feel and act like a nicely polished stone countertop

so a matte finish might be something you want to achieve with cerakote rather than anodizing

but i'm not a metals engineer, so what do i know
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: amnesia0287 on Tue, 23 January 2018, 04:37:12
After 280/220, which is after 268... So June/July seems about right.

Wow, would you drop a hint of the 280 and 220?

Also, speaking of the surface of the case, the R1 X60 has a rather reflective and smooth surface which is cool. A more matte finish is also nice and reflects the light more uniformly. (https://imgur.com/a/gG0Yu X60 vs Viper) Since this is a new factory, do you have any specific preference?

a more matte finish is often a mark of lower quality anodizing

basically, good anodizing should feel and act like a nicely polished stone countertop

so a matte finish might be something you want to achieve with cerakote rather than anodizing

but i'm not a metals engineer, so what do i know

Matte finish and most anodizing finishes just have to do with how the metal is treated before it's anodized. It dependent on if the surface is bead blasted (and what size glass beads if so) vs caustic soda vs flouride acid bath, etc.

The baths can also run into issues with overetching on machined parts, so if anything getting a clean matte finish is harder than a non matte one.
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: WhateverZYX on Tue, 23 January 2018, 07:03:53
After 280/220, which is after 268... So June/July seems about right.

Wow, would you drop a hint of the 280 and 220?

Also, speaking of the surface of the case, the R1 X60 has a rather reflective and smooth surface which is cool. A more matte finish is also nice and reflects the light more uniformly. (https://imgur.com/a/gG0Yu X60 vs Viper) Since this is a new factory, do you have any specific preference?

a more matte finish is often a mark of lower quality anodizing

basically, good anodizing should feel and act like a nicely polished stone countertop

so a matte finish might be something you want to achieve with cerakote rather than anodizing

but i'm not a metals engineer, so what do i know

You should start differentiating materials between individual parameters that actually matter, and not between "good" or "bad".

Different anodized surfaces have different properties, which makes them useful for certain applications.
Those surfaces are a function of various reaction conditions. (If you want to learn more: https://materialsdata.nist.gov/bitstream/handle/11115/221/Anodizing.pdf?sequence=1)
The only property that somewhat matters for custom keyboards is surface hardness, but I would argue that cosmetics is a far more important factor.
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: Puddsy on Tue, 23 January 2018, 16:36:41
After 280/220, which is after 268... So June/July seems about right.

Wow, would you drop a hint of the 280 and 220?

Also, speaking of the surface of the case, the R1 X60 has a rather reflective and smooth surface which is cool. A more matte finish is also nice and reflects the light more uniformly. (https://imgur.com/a/gG0Yu X60 vs Viper) Since this is a new factory, do you have any specific preference?

a more matte finish is often a mark of lower quality anodizing

basically, good anodizing should feel and act like a nicely polished stone countertop

so a matte finish might be something you want to achieve with cerakote rather than anodizing

but i'm not a metals engineer, so what do i know

You should start differentiating materials between individual parameters that actually matter, and not between "good" or "bad".

Different anodized surfaces have different properties, which makes them useful for certain applications.
Those surfaces are a function of various reaction conditions. (If you want to learn more: https://materialsdata.nist.gov/bitstream/handle/11115/221/Anodizing.pdf?sequence=1)
The only property that somewhat matters for custom keyboards is surface hardness, but I would argue that cosmetics is a far more important factor.

i'll take a read of that, but i'm mostly just regurgitating what i heard from an aluminum engineer/distributor friend of mine

thanks
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: megaforce93 on Tue, 23 January 2018, 17:49:00
love me some aluminum engineers

Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: amnesia0287 on Thu, 25 January 2018, 04:06:01
love me some aluminum engineers

I once made a boat out of aluminum foil?
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: kmba on Thu, 25 January 2018, 08:23:16
Two people haven't confirmed their order. Hurry up foolios so we can get this show on the road.
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: Vadurr on Thu, 25 January 2018, 10:33:43
Two people haven't confirmed their order. Hurry up foolios so we can get this show on the road.

I confirmed the same day, but I think he may be busy?
Title: Re: [GB] Noxary X60 R (All Invoices Out - 48 Hours To Pay)
Post by: xondat on Thu, 25 January 2018, 10:47:19
Only hold up is that I can't access the CAD files on my laptop; I'm back Saturday and will sort everything then :-*
Title: Re: [GB] Noxary X60 R
Post by: xondat on Sun, 28 January 2018, 00:04:16
(https://i.imgur.com/7ooiIlx.png)

That's the plate :-\

Will be compiling & then submitting the order before I sleep.

Edit: Order sent off, now we wait!
Title: Re: [GB] Noxary X60 R
Post by: lunr on Sun, 28 January 2018, 00:48:03
The wait begins :(
Title: Re: [GB] Noxary X60 R
Post by: kmba on Sun, 28 January 2018, 09:20:39
Same factory as 268? So maybe they'll get underway soon since those have to be nearing cnc completion and moving to ano.
Title: Re: [GB] Noxary X60 R
Post by: xondat on Sun, 28 January 2018, 12:19:13
The wait begins :(

Yes :-\

On the up side, should be a bit shorter due to lower quantity. Downside being CNY starting half way through.

Same factory as 268? So maybe they'll get underway soon since those have to be nearing cnc completion and moving to ano.

Same factory as 268!

Once I get confirmation that the order has been placed, I should have a time frame within a few days.
Title: Re: [GB] Noxary X60 R
Post by: poolside on Sun, 28 January 2018, 19:23:55
Will extra PCBs be available when the boards ship? I went no-PCB but I now think I could use one.
Title: Re: [GB] Noxary X60 R
Post by: Puddsy on Sun, 28 January 2018, 19:24:42
Will extra PCBs be available when the boards ship? I went no-PCB but I now think I could use one.

is this not standard left USB?
Title: Re: [GB] Noxary X60 R
Post by: xondat on Sun, 28 January 2018, 20:24:04
Should fit any 60% PCB using standard placement including Zeal/NerD. I'll have extra PCBs though.
Title: Re: [GB] Noxary X60 R
Post by: poolside on Mon, 29 January 2018, 17:26:29
Should fit any 60% PCB using standard placement including Zeal/NerD. I'll have extra PCBs though.

Thanks. I might then bug you once the boards ship to purchase an extra PCB  ;D
Title: Re: [GB] Noxary X60 R
Post by: exanile_tabasco on Tue, 30 January 2018, 00:25:50
Was the plan in the end to have USB-C PCBs? Or are we still being offered the ol' B.face (nothing against the old n' gold but I want to make the transition to USB-C eventually).

I see that Doyu has come out with a USB-C board but as it's still in its early revisions I thought I'd hold off on it.
Title: Re: [GB] Noxary X60 R
Post by: xondat on Tue, 30 January 2018, 08:23:06
Was the plan in the end to have USB-C PCBs? Or are we still being offered the ol' B.face (nothing against the old n' gold but I want to make the transition to USB-C eventually).

I see that Doyu has come out with a USB-C board but as it's still in its early revisions I thought I'd hold off on it.

I want to personally transition to USB C, so all my future boards including this will have it. It's just a better connector, and I see no point waiting for everyone to get cables (either the consumer or maker has to push it, and the maker can make the switch happen a lot easier).

B.face is kind of useless with this. It's a $60 PCB with a more restricting firmware. I know that's the price because of the LEDs, but they aren't useful with a build like this so it's basically $60/bad firmware vs $30/great firmware. Obvious choice to me.

I plan to use this same PCB with X60 V2 so I'd like it to be perfect, even if it means delaying this shipment or sending them separately (which I doubt either will be the case, as PCB prototyping and making changes is very quick). It won't be too complex or over the top, so should be easy.
Title: Re: [GB] Noxary X60 R
Post by: xondat on Wed, 07 February 2018, 23:13:02
Nothing to report as things slow down because of CNY. I imagine things will start shortly after they're back, and I'll report with a estimated completion date when I get it :p

Also I finally compared V1, R, and V2 (took me way too long). See the album here: https://imgur.com/a/pGkB9

R is a combination of V1 aesthetics, and V2 construction. :D
Title: Re: [GB] Noxary X60 R
Post by: Vadurr on Thu, 08 February 2018, 00:36:53
Nothing to report as things slow down because of CNY. I imagine things will start shortly after they're back, and I'll report with a estimated completion date when I get it :p

Also I finally compared V1, R, and V2 (took me way too long). See the album here: https://imgur.com/a/pGkB9

R is a combination of V1 aesthetics, and V2 construction. :D

Thanks for this! Stoked :)
Title: Re: [GB] Noxary X60 R
Post by: MMKB on Thu, 08 February 2018, 13:02:47
Nothing to report as things slow down because of CNY. I imagine things will start shortly after they're back, and I'll report with a estimated completion date when I get it :p

Also I finally compared V1, R, and V2 (took me way too long). See the album here: https://imgur.com/a/pGkB9

R is a combination of V1 aesthetics, and V2 construction. :D

Oh, I see that in V2 you moved the screws closer to the edges to make bezels even tighter.
Title: Re: [GB] Noxary X60 R
Post by: xondat on Thu, 08 February 2018, 14:18:13
Nothing to report as things slow down because of CNY. I imagine things will start shortly after they're back, and I'll report with a estimated completion date when I get it :p

Also I finally compared V1, R, and V2 (took me way too long). See the album here: https://imgur.com/a/pGkB9

R is a combination of V1 aesthetics, and V2 construction. :D

Oh, I see that in V2 you moved the screws closer to the edges to make bezels even tighter.

Well it's identical to R, just 2mm less on each side and a larger edge finish. :))

But yes, main change with the internals was switching from M3 to M2, and having a platform that I'm able to do super thin or larger bezels.
Title: Re: [GB] Noxary X60 R
Post by: Vadurr on Thu, 08 February 2018, 15:04:05
Will this be "true high profile" and not have any gaps or switches showing with key caps mounted?
Title: Re: [GB] Noxary X60 R
Post by: xondat on Thu, 08 February 2018, 15:32:15
Will this be "true high profile" and not have any gaps or switches showing with key caps mounted?

High profile of course. Same bezel height as X60 and 268:

(https://i.imgur.com/XyY60Yv.jpg)
Title: Re: [GB] Noxary X60 R
Post by: Vadurr on Fri, 09 February 2018, 01:11:06
Will this be "true high profile" and not have any gaps or switches showing with key caps mounted?

High profile of course. Same bezel height as X60 and 268:

Show Image
(https://i.imgur.com/XyY60Yv.jpg)


awwwyisss :p
Title: Re: [GB] Noxary X60 R
Post by: xondat on Wed, 21 February 2018, 23:16:00
Still CNY, so nothing new on production side.

Works well because I need to make a few design alterations due to small issues found with 268. As described in the 280/220 thread, if 268 was V2, X60 R/280/220 will be V2.1. This won't change production estimates or anything, just that I'm submitting a different file.

Going to be wrapping up the USB-C only decision by Sunday too, so will be following up PMs when I wake up :p
Title: Re: [GB] Noxary X60 R
Post by: lunr on Thu, 01 March 2018, 08:33:54
What was the decision on the USB-C thing?
Title: Re: [GB] Noxary X60 R
Post by: xondat on Thu, 01 March 2018, 08:36:22
What was the decision on the USB-C thing?

Not reached one yet, still discussing this with the person I'm doing this for :thumb:
Title: Re: [GB] Noxary X60 R
Post by: xondat on Tue, 01 May 2018, 09:47:27
Locking this as it's no longer used. :p
Title: Re: [GB] Noxary X60 R
Post by: iamtootallforthis on Sun, 17 June 2018, 13:40:14
Unlocking as this is an active group buy
Title: Re: [GB] Noxary X60 R
Post by: JJ on Thu, 12 July 2018, 03:18:24
Would be interested in taking any hhkb x60r spots

Sent from my Nexus 6P using Tapatalk

Title: Re: [GB] Noxary X60 R
Post by: xondat on Thu, 12 July 2018, 10:18:49
Hi,

For a few months, after all users agreed, all updates on this buy have been on my Discord server. I've now closed the group buy channel for this buy, and all discussion will be here.

The reasoning: This thread (https://geekhack.org/index.php?topic=96596) was posted -- the intent seems to be to make group buy issues public. I addressed the images here (https://geekhack.org/index.php?topic=96596.msg2637473#msg2637473).

None of these issues will be present with this buy, as all have been resolved with the factory.

I want to apologize for how careless this may look. I will continue to do my best, and from now on, be completely transparent with the kits.

Thanks, Anthony.

P.S. I will have a public update on what has been going on with this buy.
Title: Re: [GB] Noxary X60 R
Post by: nastrovje on Thu, 12 July 2018, 21:34:24
Following up on where I left off on discord.

Is it possible to holtite the pcb?

Are the plates already cut or could I change the layout one last time?
Title: Re: [GB] Noxary X60 R
Post by: kekstee on Fri, 13 July 2018, 04:02:32
Weren't the plates universal only?
Title: Re: [GB] Noxary X60 R
Post by: xondat on Sat, 14 July 2018, 10:17:14
Following up on where I left off on discord.

Is it possible to holtite the pcb?

Are the plates already cut or could I change the layout one last time?

I don't think there is enough space under the PCB for them.

It's only ever been a universal layout :)
Title: Re: [GB] Noxary X60 R
Post by: regionfree on Sat, 14 July 2018, 11:37:57
Following up on where I left off on discord.

Is it possible to holtite the pcb?

Are the plates already cut or could I change the layout one last time?

I don't think there is enough space under the PCB for them.

It's only ever been a universal layout :)

wow. the insides are going to be really tight!
Title: Re: [GB] Noxary X60 R
Post by: LightningXI on Mon, 16 July 2018, 04:47:03
Following up on where I left off on discord.

Is it possible to holtite the pcb?

Are the plates already cut or could I change the layout one last time?

I don't think there is enough space under the PCB for them.

It's only ever been a universal layout :)

wow. the insides are going to be really tight!
( ͡į ͜ʖ ͡į)

Sorry. I could not resist.

Sent from my mobile using Tapatalk

Title: Re: [GB] Noxary X60 R
Post by: xondat on Mon, 16 July 2018, 12:44:02
Order has been placed, don't think it'll be longer than 3/4 weeks, but I'll note down a date when I'm told one. Thanks for the patience.
Title: Re: [GB] Noxary X60 R
Post by: regionfree on Mon, 16 July 2018, 23:51:18
Following up on where I left off on discord.

Is it possible to holtite the pcb?

Are the plates already cut or could I change the layout one last time?

I don't think there is enough space under the PCB for them.

It's only ever been a universal layout :)

wow. the insides are going to be really tight!
( ͡į ͜ʖ ͡į)

Sorry. I could not resist.

Sent from my mobile using Tapatalk

( ͡į ͜ʖ ͡į)

ok ok.
Title: Re: [GB] Noxary X60 R
Post by: xondat on Mon, 23 July 2018, 13:13:58
Order has been placed, don't think it'll be longer than 3/4 weeks, but I'll note down a date when I'm told one. Thanks for the patience.

Should ship to me around August 26th.
Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Mon, 30 July 2018, 17:04:40
Update I received today from the factory:

Quote
We have finished part of the new order, the plates are finished cutting, waiting for the cases for next finishing, anodizing or sandblasting, I will take some pictures for you when we finished some.

Seems to be on track :)
Title: Re: [GB] Noxary X60 R (In Production)
Post by: megaforce93 on Mon, 30 July 2018, 17:24:57
i love binne. aka, binne daisuki
Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Mon, 30 July 2018, 17:56:24
i love binne. aka, binne daisuki

Thanks mate
Title: Re: [GB] Noxary X60 R (In Production)
Post by: MMKB on Tue, 31 July 2018, 20:11:52
Quote
Compatible with any Standard 60% PCB

I canít remember so want to confirm if this still holds true. There was a discussion around the port on Discord.
Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Tue, 31 July 2018, 20:23:41
Quote
Compatible with any Standard 60% PCB

I canít remember so want to confirm if this still holds true. There was a discussion around the port on Discord.

Switched over to a custom PCB. I will have about double the ordered amount, so will always be enough spare.

I'll update that now.
Title: Re: [GB] Noxary X60 R (In Production)
Post by: alveeno on Tue, 31 July 2018, 22:16:06
Quote
Compatible with any Standard 60% PCB

I canít remember so want to confirm if this still holds true. There was a discussion around the port on Discord.

Switched over to a custom PCB. I will have about double the ordered amount, so will always be enough spare.

I'll update that now.

There's really not going to be enough room for hotlites? That's a shame..

Also, maybe I'm tired from work, but are you saying it isn't compatible with standard 60% pcb's?

Thanks
Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Wed, 01 August 2018, 11:22:07
Quote
Compatible with any Standard 60% PCB

I canít remember so want to confirm if this still holds true. There was a discussion around the port on Discord.

Switched over to a custom PCB. I will have about double the ordered amount, so will always be enough spare.

I'll update that now.

There's really not going to be enough room for hotlites? That's a shame..

Also, maybe I'm tired from work, but are you saying it isn't compatible with standard 60% pcb's?

Thanks

Don't know about Hotlites.

It might be but the case is designed properly for the PCB that comes with it.
Title: Re: [GB] Noxary X60 R (In Production)
Post by: MMKB on Tue, 07 August 2018, 01:02:05
Quote
Compatible with any Standard 60% PCB

I canít remember so want to confirm if this still holds true. There was a discussion around the port on Discord.

Switched over to a custom PCB. I will have about double the ordered amount, so will always be enough spare.

I'll update that now.

Also, maybe I'm tired from work, but are you saying it isn't compatible with standard 60% pcb's?


It might be but the case is designed properly for the PCB that comes with it.

Slight letdown to me. Where can I find you twenty years later to get a replacement...  :-X
Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Tue, 07 August 2018, 04:51:58
Quote
Compatible with any Standard 60% PCB

I canít remember so want to confirm if this still holds true. There was a discussion around the port on Discord.

Switched over to a custom PCB. I will have about double the ordered amount, so will always be enough spare.

I'll update that now.

Also, maybe I'm tired from work, but are you saying it isn't compatible with standard 60% pcb's?


It might be but the case is designed properly for the PCB that comes with it.

Slight letdown to me. Where can I find you twenty years later to get a replacement...  :-X

Iíve ordered 50 for the ~24 already ordered plus X60 V2 will use the same PCB. Iíll always have spare as long as Iím alive :p
Title: Re: [GB] Noxary X60 R (In Production)
Post by: kekstee on Tue, 07 August 2018, 05:05:59
You said you were going for the most common USB-C placement among the custom boards so at least DO60 and Zeal should work right now?
Title: Re: [GB] Noxary X60 R (In Production)
Post by: Puddsy on Thu, 09 August 2018, 22:20:13
You said you were going for the most common USB-C placement among the custom boards so at least DO60 and Zeal should work right now?

aren't the zeal PCBs mini USB?
Title: Re: [GB] Noxary X60 R (In Production)
Post by: MMKB on Wed, 15 August 2018, 18:28:16
Update I received today from the factory:

Quote
We have finished part of the new order, the plates are finished cutting, waiting for the cases for next finishing, anodizing or sandblasting, I will take some pictures for you when we finished some.

Seems to be on track :)

:heartpumping: Did we receive any photo from the factory?
Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Thu, 16 August 2018, 09:46:51
Update I received today from the factory:

Quote
We have finished part of the new order, the plates are finished cutting, waiting for the cases for next finishing, anodizing or sandblasting, I will take some pictures for you when we finished some.

Seems to be on track :)

:heartpumping: Did we receive any photo from the factory?

I got one super **** one:

(https://cdn.discordapp.com/attachments/386225124908466179/473809153182138373/X60_R_weight.jpg)
Title: Re: [GB] Noxary X60 R (In Production)
Post by: lunr on Thu, 16 August 2018, 17:00:54
Oof they are numbered.

Update I received today from the factory:

Quote
We have finished part of the new order, the plates are finished cutting, waiting for the cases for next finishing, anodizing or sandblasting, I will take some pictures for you when we finished some.

Seems to be on track :)

:heartpumping: Did we receive any photo from the factory?

I got one super **** one:

Show Image
(https://cdn.discordapp.com/attachments/386225124908466179/473809153182138373/X60_R_weight.jpg)


Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Thu, 16 August 2018, 18:18:27
Update I received today from the factory:

Quote
We have finished part of the new order, the plates are finished cutting, waiting for the cases for next finishing, anodizing or sandblasting, I will take some pictures for you when we finished some.

Seems to be on track :)

:heartpumping: Did we receive any photo from the factory?

I got one super **** one:

Show Image
(https://cdn.discordapp.com/attachments/386225124908466179/473809153182138373/X60_R_weight.jpg)


Oof they are numbered.

They all say 01 of 20 :confused:
Title: Re: [GB] Noxary X60 R (In Production)
Post by: lunr on Thu, 16 August 2018, 18:23:02
Couldn't make out the first one. Is that intentional?

Update I received today from the factory:

Quote
We have finished part of the new order, the plates are finished cutting, waiting for the cases for next finishing, anodizing or sandblasting, I will take some pictures for you when we finished some.

Seems to be on track :)

:heartpumping: Did we receive any photo from the factory?

I got one super **** one:

Show Image
(https://cdn.discordapp.com/attachments/386225124908466179/473809153182138373/X60_R_weight.jpg)


Oof they are numbered.

They all say 01 of 20 :confused:

Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Thu, 16 August 2018, 18:34:20
Update I received today from the factory:

Quote
We have finished part of the new order, the plates are finished cutting, waiting for the cases for next finishing, anodizing or sandblasting, I will take some pictures for you when we finished some.

Seems to be on track :)

:heartpumping: Did we receive any photo from the factory?

I got one super **** one:

Show Image
(https://cdn.discordapp.com/attachments/386225124908466179/473809153182138373/X60_R_weight.jpg)


Oof they are numbered.

They all say 01 of 20 :confused:

Couldn't make out the first one. Is that intentional?

Yep.
Title: Re: [GB] Noxary X60 R (In Production)
Post by: xondat on Thu, 16 August 2018, 21:43:59
Another update:

Quote
Thanks for your patience, we have finished the machining and anodizing of the new order, but the sandblasted surface of the brass plates and weight isn't good enough, so we arrange the sandblast again, we can packing all parts well and send next week, I will take photos for you later.
Title: Re: [GB] Noxary X60 R (In Production)
Post by: iNViSiBiLiTi on Fri, 17 August 2018, 00:33:37
Another update:

Quote
Thanks for your patience, we have finished the machining and anodizing of the new order, but the sandblasted surface of the brass plates and weight isn't good enough, so we arrange the sandblast again, we can packing all parts well and send next week, I will take photos for you later.

280 soon  :eek:
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: xondat on Thu, 23 August 2018, 22:19:26
(https://i.imgur.com/ixhJDHI.jpg)

Pink HHKB.


(https://i.imgur.com/gvZid4B.jpg)

Mixture between X60 V1 plate (on top), some brass X60 R plates (middle), and 268.2 brass plates (bottom).


(https://i.imgur.com/xy5cefo.jpg)

Various cases. I think the right hand side is the X60 Rs.



They're still fixing the "dirty mark" on some brass parts. I've asked for some pictures to see what it is, but it sounds like they're extremely close to shipping these out :p
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: lunr on Thu, 23 August 2018, 23:06:51
yay
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: MMKB on Fri, 24 August 2018, 00:55:53
Oooof.  :p Plates look thick. If only someone could match it with a Golf R.
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: xondat on Fri, 24 August 2018, 15:01:01
Also PCB production should be completed end of next week or week after.

I am away 7th - 10th September so nothing will ship around then (if stuff arrives before). Most likely stuff will ship 12th onwards sorta thing. It's hard to say when manufacturers don't give a solid date, plus shipping etc. We're close though :-*
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: regionfree on Fri, 24 August 2018, 21:29:26
that violet there, that's my X60 R :cool:
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: kekstee on Sat, 25 August 2018, 02:21:02
Crossing my fingers for a mid September final shipping date :P

So hyped. The shade of pink seems great.
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: amnesia0287 on Sat, 25 August 2018, 08:18:28
that violet there, that's my X60 R :cool:

When you gonna sell me my x60r?
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: regionfree on Sat, 25 August 2018, 09:53:04
that violet there, that's my X60 R :cool:

When you gonna sell me my x60r?

i'm sorry, my friend, but i'll have to break your heart :D
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: Vadurr on Tue, 28 August 2018, 14:43:15
Anyone with a dark gray hhkb kit interested in trading for bluegray?
Title: Re: [GB] Noxary X60 R (Production 95% Finished)
Post by: xondat on Fri, 31 August 2018, 20:10:54
Parts will be "completed this weekend", so I think it should ship Monday/Tuesday. I'll check on the progress of the PCBs tomorrow and update when I know. Between QC and shipping, probably should both arrive around the same time.
Title: Re: [GB] Noxary X60 R (Production Finished)
Post by: xondat on Sat, 01 September 2018, 22:12:25
Just paid the manufacturer the remaining amount - usually a very good sign of progress. Forgot to ask Rozakiin about the PCBs but set myself a reminder for when I wake up (since it's 4am and messaging now would be silly). :p
Title: Re: [GB] Noxary X60 R (Production Finished)
Post by: ns90 on Tue, 04 September 2018, 20:26:26
WTS Dark Gray WKL spot with brass plate.
Title: Re: [GB] Noxary X60 R (Production Finished)
Post by: phearboner on Wed, 05 September 2018, 06:20:20
Ns90 Is spot still open? I'd like to take it
Title: Re: [GB] Noxary X60 R (Production Finished)
Post by: xondat on Wed, 05 September 2018, 08:10:59
Cases have shipped! Expected 10th of September. Will be able to start QC on the 12th.
Title: Re: [GB] Noxary X60 R (Production Finished)
Post by: pawn63295 on Sun, 09 September 2018, 19:52:19
new to the custom KB community. you have extras for sale or whats up here? also do these come with programmed PCB's? lemme know!
Title: Re: [GB] Noxary X60 R (Production Finished)
Post by: xondat on Mon, 10 September 2018, 16:25:19
Receiving the parts tomorrow (11th of September), will update when I get them and try and give a guideline of shipping.

new to the custom KB community. you have extras for sale or whats up here? also do these come with programmed PCB's? lemme know!

No extras. The PCBs run QMK.
Title: Re: [GB] Noxary X60 R (Production Finished)
Post by: megaforce93 on Mon, 10 September 2018, 20:31:47
qmk daisuki
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Tue, 11 September 2018, 07:39:32
Cases have arrived, will post pictures later.

PCBs should've been shipped today to Rozakiin. They'll be programmed and shipped to me ASAP.

(https://cdn.discordapp.com/attachments/312287977151660042/489028310194585611/image0.jpg)
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: lunr on Tue, 11 September 2018, 08:17:37
yayyy
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: megaforce93 on Tue, 11 September 2018, 11:48:08
200iq yousoros
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Tue, 11 September 2018, 11:57:17
(https://cdn.discordapp.com/attachments/386225124908466179/489105796651548694/image0.jpg)

eh
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Tue, 11 September 2018, 15:21:26
(https://cdn.discordapp.com/attachments/438429095303315456/489165624568971264/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489084715266080779/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489085019239743498/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489083077423792128/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489093214847107085/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489105511090880512/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489081201655808011/image0.jpg)

iPhone + Discord compression makes some of the cases look really weird (1 & 3), they aren't like that in person. I'll get some better ones tomorrow :)

Personally I'm very happy with what I'm seeing so hope it's the same for everyone else.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: kekstee on Tue, 11 September 2018, 16:49:02
Undecided whether the wait just got better or worse.

:*
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: Mcnos on Tue, 11 September 2018, 17:03:51
As usual, I'm always here if someone wants to sell lol.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: sana on Tue, 11 September 2018, 19:50:03
As usual, I'm always here if someone wants to sell lol.

Same lol, I want that pink
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: Vadurr on Wed, 12 September 2018, 01:39:44
Can't wait to see more pics of that bluegray :p
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Thu, 13 September 2018, 10:03:09
(https://cdn.discordapp.com/attachments/438429095303315456/489188948749451276/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489188948263043081/image1.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489188970048258053/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/489188969527902219/image1.jpg)

Boxes and screws will be ordered tonight, and then I'll work on the shipping invoices.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: regionfree on Thu, 13 September 2018, 11:07:32
i love the uniformity of the distance of the bottom screws from the edges of the case. unseen detail, but really appreciated.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: poolside on Mon, 17 September 2018, 16:58:23
How close is the color match between top and bottom pieces on the colored boards, especially ultra violet and pink? I am considering a last minute color change for the 280.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: MMKB on Fri, 21 September 2018, 06:08:58
Want to see a full build so badly ó even an empty one w/o the PCB
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Wed, 26 September 2018, 18:25:06
Boxes, screws, and PCBs have arrived. I'll start organizing shipping invoices/sending for the first few in the coming days.

Sorry for not posting more, been having some irl problems.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: alveeno on Fri, 28 September 2018, 16:03:01
Hype,

Would love a group buy for TX bags. I need a hefty bag to bring this to work
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Fri, 28 September 2018, 18:06:24
Hype,

Would love a group buy for TX bags. I need a hefty bag to bring this to work

I think TX has an IC up for exactly that


Regarding the buy, I will be invoicing the following 5 people for shipping:

poolside
exanile_tabasco
captainbuttmonkey
MMKB
regionfree

Hopefully ship Monday.

I will PM everyone else, thanks.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: regionfree on Fri, 28 September 2018, 21:57:05
Hype,

Would love a group buy for TX bags. I need a hefty bag to bring this to work

I think TX has an IC up for exactly that


Regarding the buy, I will be invoicing the following 5 people for shipping:

poolside
exanile_tabasco
captainbuttmonkey
MMKB
regionfree

Hopefully ship Monday.

I will PM everyone else, thanks.

looking forward to the invoice. thanks!
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: MMKB on Sat, 29 September 2018, 01:28:46
Oof my toolkits and camera are ready. Thanks xondat
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: kekstee on Sat, 29 September 2018, 17:34:07
I just hope it's in time for Mechanicon at this point
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: exanile_tabasco on Sun, 30 September 2018, 19:38:44
yeetus it is time
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: pixelpusher on Sun, 30 September 2018, 20:49:58
I can haz my 268 that I paid for 8 months ago?   :p
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: R4WBIT on Mon, 01 October 2018, 01:21:12
I can haz my 268 that I paid for 8 months ago?   :p

Get in line :D still waiting for my ORIGINAL X60 top piece....
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: Mcnos on Mon, 01 October 2018, 22:31:16
I can haz my 268 that I paid for 8 months ago?   :p

Give him time yo, or else your board will end up with issues.

Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: wholypantalones on Tue, 02 October 2018, 16:04:45
I can haz my 268 that I paid for 8 months ago?   :p

Give him time yo, or else your board will end up with issues.

Yipes.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: pixelpusher on Tue, 02 October 2018, 16:09:59
I can haz my 268 that I paid for 8 months ago?   :p

Give him time yo, or else your board will end up with issues.

My norbauer case is kinda like that on the top.  I pretend it's a cool texture
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: nastrovje on Wed, 10 October 2018, 07:26:05
Has anyone received their board yet?
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: MMKB on Wed, 10 October 2018, 09:53:02
Has anyone received their board yet?

Been waiting for my shipping invoice for more than a week.

Everything OK to ship, xondat?
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Wed, 10 October 2018, 12:44:10
Waiting on some hex keys so I can put the cases together. Want to make sure the threads are fine to avoid the 268 problems. Sorry for not posting that.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: MMKB on Fri, 12 October 2018, 15:49:33
Waiting on some hex keys so I can put the cases together. Want to make sure the threads are fine to avoid the 268 problems. Sorry for not posting that.

Oh so it won't be Phillips screws this time. I've both metric & imperial hex keys ready so hopefully I'll never strip my screws again.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Fri, 12 October 2018, 17:54:30
Waiting on some hex keys so I can put the cases together. Want to make sure the threads are fine to avoid the 268 problems. Sorry for not posting that.

Oh so it won't be Phillips screws this time. I've both metric & imperial hex keys ready so hopefully I'll never strip my screws again.

They're metric M2 hex. I did slot for the last one but people complained about slipping and scratching the case so thought I'd go back to these as these look the second best.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: MMKB on Mon, 15 October 2018, 19:08:28
 :-X
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: kekstee on Tue, 23 October 2018, 15:03:51
(https://i.imgur.com/FKWeK0r.gif)
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: Mcnos on Tue, 23 October 2018, 19:02:24
Show Image
(https://i.imgur.com/FKWeK0r.gif)


wait
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Wed, 24 October 2018, 11:01:12
Bad news inc.

I got the hex keys and was testing the threads out. M2 screws do not fit into the bottom pieces. I asked my contact and he said "The holes are M2 threaded holes, the loose problem must be caused by several times anodizing".

This applies to all bottom pieces unfortunately. I'll be sending them back and they'll make new replacements.

As a general statement, I won't be using this factory again, although I think that goes without saying.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: kekstee on Wed, 24 October 2018, 12:34:35
Threads? Bottom piece? Doesn't the bottom have through holes which could only be too tight?
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Wed, 24 October 2018, 12:48:38
Threads? Bottom piece? Doesn't the bottom have through holes which could only be too tight?

Itís where the weight screws into.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: dyrdevil on Wed, 24 October 2018, 12:55:53
Sad to hear that but Iím happy and thankful you checked it out before sending out the cases!
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: Captainbuttmonkey on Wed, 24 October 2018, 13:19:19
Probably a dumb question but would it not be possible to just find a screw that fits?
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: kekstee on Wed, 24 October 2018, 13:32:14
M2.5 is quite a difference already. You might be able to just cut a bigger thread if it isn't too close to the wall
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Wed, 24 October 2018, 14:54:48
Probably a dumb question but would it not be possible to just find a screw that fits?

Not a dumb question.

I’d have to modify the weights to fit larger screws through, plus the “M2” holes probably aren’t any specific spec e.g. M2.5, M3 etc.

In general I expect working parts to my specification from a factory, if they can’t deliver then I need to return the faulty parts. Modifying what I already have would be a lot of work plus the factory would get away with it.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: Rafa_n on Wed, 24 October 2018, 15:00:44
So, should we expect a delay of like 6 months? less?
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: nastrovje on Wed, 24 October 2018, 17:59:30
Selling/transferring a spot for a silver HHKB if anyone is interested - GONE
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: MMKB on Wed, 24 October 2018, 23:10:39
If it only affect the weight Iím personally okay with super glue  ;D although as a creator youíll find it atrocious
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: ns90 on Thu, 25 October 2018, 09:58:37
WTS WKL Grey Spot with Brass Plate.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: Captainbuttmonkey on Fri, 26 October 2018, 10:40:48
Probably a dumb question but would it not be possible to just find a screw that fits?

Not a dumb question.

Iíd have to modify the weights to fit larger screws through, plus the ďM2Ē holes probably arenít any specific spec e.g. M2.5, M3 etc.

In general I expect working parts to my specification from a factory, if they canít deliver then I need to return the faulty parts. Modifying what I already have would be a lot of work plus the factory would get away with it.

Ah I see, that makes sense. Yeh I agree with your response, at least you noticed it before they went out to people. Oh well I've waited far longer than this for stuff before so I'm sure I'll cope with the delay haha.
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: regionfree on Fri, 26 October 2018, 20:58:03
Still want to own one, and don't need it now. Willing to wait on this.

@xondat so only the bottom case pieces will be remade? won't this increase the chances of the top and bottom pieces not matching in color/anodization shade?
Title: Re: [GB] Noxary X60 R (Cases Arrived)
Post by: xondat on Sat, 03 November 2018, 18:29:44
@xondat so only the bottom case pieces will be remade? won't this increase the chances of the top and bottom pieces not matching in color/anodization shade?

Think so, and they know I want matching so they should be able to match it considering they have all the parts.
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: exanile_tabasco on Mon, 19 November 2018, 23:33:19
Seems screws and me just don't get along, eh? First the X60 was wrecked by its screws, now the X60 R needs fixing for its screws, and when I just put in Fox coilovers in my truck last week the sway bar bolts stripped out all the threads inside the frame so I drove around without a swaybar and now it's in the shop getting the frame nuts fixed because of a few screws.  :confused:

I don't mind waiting for it done right, man. :thumb: I mean, I still need to build my Klippe...
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: megaforce93 on Tue, 20 November 2018, 11:10:20
tamako daisuki
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: duckboi on Thu, 29 November 2018, 12:54:16
hello sir when is this rerunning thank you for your time
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: xondat on Mon, 31 December 2018, 11:38:56
Just received word these will ship to me in about 30 days. Thanks for your patience, I think it'll be worth it in the end.
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: megaforce93 on Fri, 04 January 2019, 10:56:28
god bless

and roll tide brother
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: xondat on Sun, 20 January 2019, 16:24:10
Blue Gray and Black cases are ready to ship, just waiting on the other few colors now. I'll post some factory pictures shortly.
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: xondat on Sun, 20 January 2019, 18:14:26
(https://i.imgur.com/W9VkAxt.jpg)

(https://i.imgur.com/M6BYVit.jpg)

(https://i.imgur.com/WegFPcW.jpg)

(https://i.imgur.com/nCs8WNU.jpg)
Title: Re: [GB] Noxary X60 R (Production x2?)
Post by: regionfree on Sun, 20 January 2019, 18:23:32
Awesome, thanks for the update!
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: xondat on Sun, 20 January 2019, 20:42:00
Just been told they're all done, and ready to ship. Will post new pictures when I get them. :p
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: regionfree on Sun, 20 January 2019, 21:10:28
For the love of god, please show me the purple beauty :))

Just been told they're all done, and ready to ship. Will post new pictures when I get them. :p
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: xondat on Tue, 22 January 2019, 15:41:01
(https://i.imgur.com/i8BXMnJ.jpg)

Silver, Silver, Black Dark Gray
Pink, Ultra Violet, Blue Gray
Blue Gray, Dark Gray, Black

(https://i.imgur.com/2BKO58V.jpg)

(https://i.imgur.com/xFDwQ25.jpg)

(https://i.imgur.com/jdmAHV9.jpg?1)

(https://i.imgur.com/0wSqU4O.jpg)

(https://i.imgur.com/m1WVhME.jpg)

I think I'll have these in about a week.

The plan is approximately to quality check them, then build them all before going on a short trip (7th - 11th). I'll be able to hand deliver one of the cases on this trip (and convince him to leave some feedback or whatever), but otherwise should be ready to mail them all out when I get back. I do have one spare blue gray 60%, so PM if you're interested. I'll send out shipping forms/invoices just before I start building them, and hopefully all are paid by the time I get back.

I'm hopeful but cautious still. The manufacturer hasn't had any major problems, and when there have been minor problems, they replaced instantly. The anodizing on the T60s they produced was damn flawless, and the only problems I had were some hook marks on the inside, but those shouldn't happen again. I'm sure there will be a long story time after these are sent out, but let's get them shipped first :)
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: kekstee on Tue, 22 January 2019, 16:37:51
Damn nice :) I'm carefully optimistic.
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: regionfree on Tue, 22 January 2019, 20:25:45
that purple is mine. just want to say that out.
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: clasicks on Wed, 23 January 2019, 10:09:42
that purple is mine. just want to say that out.

best of the batch, looks killer
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: xondat on Wed, 23 January 2019, 16:03:43
Will arrive on the 29th.

Blue gray 60% is gone, sorry to those that missed out.
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: xondat on Sun, 27 January 2019, 08:56:06
Show Image
(https://i.imgur.com/i8BXMnJ.jpg)


Silver, Silver, Black Dark Gray
Pink, Ultra Violet, Blue Gray
Blue Gray, Dark Gray, Black

Made a mistake, top right is Dark Gray
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: Coolbeanz on Sun, 27 January 2019, 09:00:01
Is there any extra GB slot that I can hop on for this board? :D
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: xondat on Sun, 27 January 2019, 09:01:21
Is there any extra GB slot that I can hop on for this board? :D

Nope
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: xondat on Tue, 29 January 2019, 11:44:36
(https://i.imgur.com/adUZfM5.png)

Safe to say it isn't arriving today, don't know why. I'll chase them tomorrow if nothing moves :'(
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: megaforce93 on Tue, 29 January 2019, 11:52:04
chin up lad youll gettem next time
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: xondat on Tue, 29 January 2019, 16:41:09
(https://i.imgur.com/cj7QQet.png)

Still says delivery today, could arrive tomorrow but most likely Thursday.
Title: Re: [GB] Noxary X60 R (Shipping To Me)
Post by: regionfree on Wed, 30 January 2019, 09:15:50
Some of replacement parts have arrived, and more coming it seems. Excited for this!
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: xondat on Wed, 30 January 2019, 09:27:56
(https://cdn.discordapp.com/attachments/438429095303315456/540181307481784320/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/540182738670714911/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/540179748261724160/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/540178971548188672/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/540176586889101338/image0.jpg)

Received 9/20 aluminum bits today, I didn't realize the tracking number was for two shipments, so the other crate will arrive this week I presume.

Quality is spot on, if anyone saw T60, it's like that. Nothing to complain about apart from the split shipment :p
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: frostbyte-gaming on Wed, 30 January 2019, 09:31:46
Oh man looking good getting hyped for this bad boy.  :thumb:
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: Rafa_n on Wed, 30 January 2019, 10:00:19
Nice! Can't wait to build mine  :D
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: megaforce93 on Wed, 30 January 2019, 10:05:11
hey look the screws goes in
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: Vadurr on Wed, 30 January 2019, 11:57:04
Just curious here...Anyone else interested in a 5mm pc plate for the R?
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: xondat on Wed, 30 January 2019, 12:17:29
I couldn't resist throwing a mock up build in a case. Also my rooms light is very yellow, so keep that in mind regarding color accuracy. :)

(https://i.imgur.com/rPsb762.jpg)

(https://i.imgur.com/5YR1Ucx.jpg)

(https://i.imgur.com/rZhbJkw.jpg)

(https://i.imgur.com/XtZdTrd.jpg)

Reset switch & hole. I thought this would be too small of a hole, but the hex key size that's used to build the boards fits really well.

(https://i.imgur.com/FIbXMxc.jpg)

(https://i.imgur.com/NFXMmb1.jpg)
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: xondat on Wed, 30 January 2019, 21:37:24
Scheduled to receive the other half on the 31st so expect a bunch more pictures. Boxes are ordered, so should receive those next week (needed the foam to measure).
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: xondat on Thu, 31 January 2019, 07:12:33
Just received the 2nd half. Will start building later :thumb:
Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: forumusername on Thu, 31 January 2019, 09:50:00
Just received the 2nd half. Will start building later :thumb:
Nut

Sent from my PH-1 using Tapatalk

Title: Re: [GB] Noxary X60 R (Receiving Cases)
Post by: kekstee on Thu, 31 January 2019, 13:12:38
Yes. I need this :D
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Fri, 01 February 2019, 16:30:46
(https://cdn.discordapp.com/attachments/438429095303315456/541017499630567424/image0.jpg)

(https://cdn.discordapp.com/attachments/386225124908466179/541003669966028823/image0.jpg)

Screwed in all the weights and plates tonight, will screw all the cases together tomorrow. Over the weekend I'll update the spreadsheet and send out the shipping form whilst we wait for the boxes to arrive.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Sat, 02 February 2019, 16:15:30
(https://cdn.discordapp.com/attachments/438429095303315456/541380131177103390/image0.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/541380130560278528/image1.jpg)

(https://cdn.discordapp.com/attachments/438429095303315456/541380131923558400/image2.jpg)

All assembled :thumb:

Will get these packed in their foam with PCBs and extra plates then they'll be ready to put into the boxes when they arrive.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: dyrdevil on Sat, 02 February 2019, 16:40:21
Looks great. Can't wait.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: megaforce93 on Sat, 02 February 2019, 21:32:53
imagine getting brass plates omegalul
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Wed, 06 February 2019, 13:24:37
Received the boxes today so will pack them when I get back and hopefully send them out late next week.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: Velvet_Crowe on Sun, 10 February 2019, 10:56:19
Wish I had joined this! The ano and colours look really great. On the off-chance anyone wants to sell theirs when they get it, I'm interested! :D
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: megaforce93 on Sun, 10 February 2019, 16:19:41
i love medusa baby


(https://cdn.discordapp.com/attachments/405208753726816259/544281687002185732/Egkg4rw.png)

(https://media.discordapp.net/attachments/405208753726816259/544281706387996697/Gx9jpyq.png?width=1442&height=661)


(https://images-ext-2.discordapp.net/external/NcxbWkkKqKFTCCfQMQm8kmYhxBIDpNYNdL6r-RPBjY4/https/i.imgur.com/eRxORe8.jpg?width=1442&height=661)
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Sun, 10 February 2019, 20:35:51
i love medusa baby


Show Image
(https://cdn.discordapp.com/attachments/405208753726816259/544281687002185732/Egkg4rw.png)


Show Image
(https://media.discordapp.net/attachments/405208753726816259/544281706387996697/Gx9jpyq.png?width=1442&height=661)



Show Image
(https://images-ext-2.discordapp.net/external/NcxbWkkKqKFTCCfQMQm8kmYhxBIDpNYNdL6r-RPBjY4/https/i.imgur.com/eRxORe8.jpg?width=1442&height=661)


nollaun kamsahamnida
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Wed, 13 February 2019, 17:48:54
I've QC'd and packed the following:

001
002
003
004
005
006 (delivered)
007

I'll send out shipping invoices shortly. These will be sent out first to make sure no problems with packaging etc, then the rest can be sorted. Only issues I've found with the new aluminum parts is that the color matching is decently far off, which is annoying, but it's something that can be improved for the future.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Thu, 14 February 2019, 19:12:12
Only issues I've found with the new aluminum parts is that the color matching is decently far off, which is annoying, but it's something that can be improved for the future.

Factory rep said they get back on Monday and can review their actions then so going to wait till then. I should've expanded initially - it seems like the finish is slightly different, as they reflect light differently. The color saturation also is difference, so adding these two issues together can create quite a big difference in the worst cases.

In the mean time I'll pack the silver and pink boards (which are fine color wise, the others have varying results) so there is the option to start sending some out. Silver/pink boards are:

005
008
013
014
016
018
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: regionfree on Thu, 14 February 2019, 22:26:52
purple is a shade of pink
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: lunr on Fri, 15 February 2019, 08:23:56
well rip on the grey cases.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: ns90 on Fri, 15 February 2019, 09:42:51
Are there any pics that highlight the color variance? If it's not that bad, I may not care.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: Vadurr on Fri, 15 February 2019, 12:10:15
Bummer x_x I guess I can give cerakote a try if anything
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Fri, 15 February 2019, 12:19:30
Let's wait and see before jumping to conclusions. The factory have been good with fixing things in the past.

I'll post pictures depending on what sort of action they want to take.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Fri, 15 February 2019, 20:02:47
Invoiced the follow for shipping:

005
008
013
014
016
018

I'll get them packed over the weekend and hopefully have them collected Monday.
Title: Re: [GB] Noxary X60 R (Prepraing For Shipping)
Post by: xondat on Fri, 22 February 2019, 17:01:26
Invoiced the rest of you for invoicing. Some people didn't have a PCB at all, so I've added 1 on at the original cost. Let me know if something is incorrect (please don't pay if it is).


Regarding the color difference, the factory have said it's within their suppliers limits. The main points were that the piece thickness affects the duration in the anodizing baths, and beacuse it's all manual, it leads to instability of the results. They also mentioned it's to do with the aluminum batch quality, so different batches can yield different results.


Apologies for not shipping the above last week, something happened Monday night that I've been trying to overcome.

Anyway, I'll be packing the rest over the weekend and keep you all posted.
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: xondat on Mon, 25 February 2019, 16:20:21
I'd like to move to using digital invoices so I will ship one (Vadur's) as a test. I would rather to be charged once instead of 7 extra times :) Will be collected tomorrow and then should arrive by end of week. Should speed up the label process a little bit for the future.

Everyone paid their shipping invoice, so thank you for being prompt on that. Once Vadur's board arrives (hopefully issue free), then will get the rest out.
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: Vadurr on Mon, 25 February 2019, 17:16:10
Wish me luck fam :thumb:
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: Vadurr on Fri, 01 March 2019, 00:42:24
Oof
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: Vadurr on Fri, 01 March 2019, 00:43:04
<3

(https://cdn.discordapp.com/attachments/480103341532381184/550930185399173120/20190228_220425.jpg)

(https://cdn.discordapp.com/attachments/480103341532381184/550930185399173121/20190228_220540.jpg)
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: frostbyte-gaming on Fri, 01 March 2019, 08:52:52
<3

Show Image
(https://cdn.discordapp.com/attachments/480103341532381184/550930185399173120/20190228_220425.jpg)


Show Image
(https://cdn.discordapp.com/attachments/480103341532381184/550930185399173121/20190228_220540.jpg)


oof looks good hyped to see more pics.  :eek:
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: kekstee on Mon, 04 March 2019, 05:45:54
So the 'test' was successful?
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: xondat on Tue, 05 March 2019, 02:52:59
So the 'test' was successful?

Yes, I will start packing and sending the rest. Will be working in invoice number order, however most are easy after the first 10 due to no extra parts. I think I can have 002-009 done this week, and 010-020 done early next week.
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: xondat on Sat, 09 March 2019, 16:50:05
(https://cdn.discordapp.com/attachments/505591678795513856/553960331668357120/image0.jpg)

Sealed 9 - needs box & label. Other 8 need bumpons/PCBs then sealing etc.
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: regionfree on Sat, 09 March 2019, 18:51:09
my 020!
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: xondat on Thu, 14 March 2019, 09:33:56
(https://cdn.discordapp.com/attachments/505591678795513856/555739127811932174/image0.jpg)

Sealed all 17 now. Will start printing labels and assembling boxes later.

(The bumpons are the circled item, they're inside on the others)
Title: Re: [GB] Noxary X60 R (Shipping)
Post by: xondat on Thu, 14 March 2019, 18:20:17
Shipping tomorrow:

005
008
009
017
018
019
020

Don't want to ship all 17 in one go, so will have the rest picked up Monday.
Title: Re: [GB] Noxary X60 R (60% Shipped)
Post by: xondat on Fri, 15 March 2019, 07:11:39
Just been collected. If you didn't get tracking via text, or it doesn't arrive by Tuesday, please give me a ping.

Remaining 8 will be collected Monday.
Title: Re: [GB] Noxary X60 R (60% Shipped)
Post by: Captainbuttmonkey on Sat, 16 March 2019, 07:36:24
Received mine yesterday and can definitely say it was worth the wait. Quality is all round excellent, really impressed with the ano and I think the colour matching is great. Awesome job Xondat  :thumb:

My ****ty phone pictures really don't do it justice though haha.

(https://i.lensdump.com/i/WrCKN0.jpg)
(https://i.lensdump.com/i/WrC433.jpg)
Title: Re: [GB] Noxary X60 R (60% Shipped)
Post by: xondat on Sun, 17 March 2019, 16:18:36
Remaining 8 will be collected Monday.

Correction, will be Tuesday since I want the 1st proper batch to arrive (which is mostly on Monday) and get some quick feedback on packaging etc.


Received mine yesterday and can definitely say it was worth the wait. Quality is all round excellent, really impressed with the ano and I think the colour matching is great. Awesome job Xondat  :thumb:

My ****ty phone pictures really don't do it justice though haha.

Show Image
(https://i.lensdump.com/i/WrCKN0.jpg)

Show Image
(https://i.lensdump.com/i/WrC433.jpg)


Thanks for the kind words, super nice to hear it was worth the wait.
Title: Re: [GB] Noxary X60 R (60% Shipped)
Post by: kekstee on Mon, 18 March 2019, 12:43:01
Wheeew. Looks excellent. I hope I can build and document it a bit better next weekend :)

[attachimg=1]
Title: Re: [GB] Noxary X60 R (60% Shipped)
Post by: xondat on Mon, 18 March 2019, 13:05:20
Wheeew. Looks excellent. I hope I can build and document it a bit better next weekend :)

(Attachment Link)

Good to hear :thumb: Looking forward to it.
Title: Re: [GB] Noxary X60 R (60% Shipped)
Post by: xondat on Wed, 20 March 2019, 14:18:40
Remaining 8: I forgot to schedule a collection for Tuesday, so scheduled one for day, however they didn't come so guess I'll try again for tomorrow (Thursday).

Looks like all the others have been delivered :thumb:

Once all are delivered, I'll PM everyone an exit form for feedback etc. as it'll help with future projects.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Thu, 21 March 2019, 07:46:30
100% shipped :p

Most should be delivered by Friday unless you're kinda remote, then it'll be Monday. LMK if you haven't got tracking via text.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: frostbyte-gaming on Thu, 21 March 2019, 20:52:40
Received my X60R today and really happy with how it turned out, the silver looks and feels great and the screws came out with no issues.

It's getting late so I didn't have time to finish building but I will be sure to get some pics as well as post my thoughts on the board and how it feels once it's built. I've been really enjoying the lower height on the 268 and so I'm expecting this to feel similar if not as good.

In the meantime here are some crappy lighting pics I took.

[attachimg=1]
[attachimg=2]
[attachimg=3]
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: loktrevor on Thu, 21 March 2019, 20:55:37
Received my X60R today and really happy with how it turned out, the silver looks and feels great and the screws came out with no issues.

It's getting late so I didn't have time to finish building but I will be sure to get some pics as well as post my thoughts on the board and how it feels once it's built. I've been really enjoying the lower height on the 268 and so I'm expecting this to feel similar if not as good.

In the meantime here are some crappy lighting pics I took.

(Attachment Link)
(Attachment Link)
(Attachment Link)
That's so lit bro

Sent from my LG-H932 using Tapatalk

Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Fri, 22 March 2019, 21:22:43
Seems like all others will arrive Monday or Tuesday latest.

Received my X60R today and really happy with how it turned out, the silver looks and feels great and the screws came out with no issues.

It's getting late so I didn't have time to finish building but I will be sure to get some pics as well as post my thoughts on the board and how it feels once it's built. I've been really enjoying the lower height on the 268 and so I'm expecting this to feel similar if not as good.

In the meantime here are some crappy lighting pics I took.

(Attachment Link)
(Attachment Link)
(Attachment Link)

Thanks :p
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sat, 23 March 2019, 11:30:34
Will preface everything I say about this by saying I was not in the GB from the start and didn't follow everything about this except skimming over the thread a few days ago:

Just got mine, initial impressions are I am impressed. Color matching between top and bottom don't seem too bad for me. Minor scratch by the USB port and on the plate but other than that it seems great. Going to get it built today and will get some nice pictures tomorrow when I get my desk cleaned up :P

(https://i.imgur.com/qtrv37p.jpg)
(https://i.imgur.com/t6EQCub.jpg)

How do I program this thing, and how do I turn on the backlight? I'm assuming it has backlight support based on the resistors?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: LightningXI on Sat, 23 March 2019, 11:36:55
Will preface everything I say about this by saying I was not in the GB from the start and didn't follow everything about this except skimming over the thread a few days ago:

Just got mine, initial impressions are I am impressed. Color matching between top and bottom don't seem too bad for me. Minor scratch by the USB port and on the plate but other than that it seems great. Going to get it built today and will get some nice pictures tomorrow when I get my desk cleaned up :P

Show Image
(https://i.imgur.com/qtrv37p.jpg)

Show Image
(https://i.imgur.com/t6EQCub.jpg)


How do I program this thing, and how do I turn on the backlight? I'm assuming it has backlight support based on the resistors?

What does the PCB look like?

If the PCB supports QMK, then you need to program RGB_TOG onto a key for underglow (RGB on the underside of the PCB) or BL_TOGG for per-switch backlighting.

https://docs.qmk.fm/#/keycodes

Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sat, 23 March 2019, 12:21:15
Will preface everything I say about this by saying I was not in the GB from the start and didn't follow everything about this except skimming over the thread a few days ago:

Just got mine, initial impressions are I am impressed. Color matching between top and bottom don't seem too bad for me. Minor scratch by the USB port and on the plate but other than that it seems great. Going to get it built today and will get some nice pictures tomorrow when I get my desk cleaned up :P

Show Image
(https://i.imgur.com/qtrv37p.jpg)

Show Image
(https://i.imgur.com/t6EQCub.jpg)


How do I program this thing, and how do I turn on the backlight? I'm assuming it has backlight support based on the resistors?

What does the PCB look like?

If the PCB supports QMK, then you need to program RGB_TOG onto a key for underglow (RGB on the underside of the PCB) or BL_TOGG for per-switch backlighting.

https://docs.qmk.fm/#/keycodes
I am basically worthless when it comes to programming keyboards. I see there is the noxary 268 pcb on qmk configurator but there is no noxary 260 pcb (which is what this is). I'll get it figured out soon I guess lol



ok I got it reprogrammed in qmk. dont need any help with that actually.  :p
pics tomorrow
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: lunr on Sat, 23 March 2019, 15:05:42
aside of the weird black smudges and circles on my weight, quite happy. built with lubed red pandas.

[attach=1]

ignore the tmo50
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sun, 24 March 2019, 10:31:01
So mine is all built and programmed now. Very happy with it :)

(https://i.imgur.com/vewxE9c.jpg)
(https://i.imgur.com/TTaDfWc.jpg)
(https://i.imgur.com/cL7EZkM.jpg)
(https://i.imgur.com/HCOPYyk.jpg)


It just has stock retooled mx blacks because this is my gaming keyboard




Things I like:
Very low profile, it is impressive how small this board is especially given that it isn't a tray mount
Seams between top and bottom are very small and line up great
Finish is very smooth (noticeably nicer than 360c, mira, lz gh v2, etc)
Heavy (4lbs built)

Things that could be improved:
Plate is pretty snug inside of the top half of the case, have to push down on it somewhat hard to get it to go all the way into the top
Plate switch holes were on the slightly snug side, not too hard to press switches into though (might just be a preference thing)
Little scratches here and there (One scratch on back side of case, shown in 2nd pic. Scratch on plate by the noxary logo. Scratch on brass plate on bottom of board, shown in 4th pic.)
Resistors maybe could be tweaked:
I think the resistors could be changed to allow for better backlighting. Right now my LEDs are incredibly dim even at the highest setting, dimmer than how bright these LEDs were on the lowest possible setting on the 1UP 60 PCB they were on before.
(https://i.imgur.com/FgriICW.jpg)
When I have more time I will try to swap them out for something else.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: LightningXI on Sun, 24 March 2019, 10:42:34
So mine is all built and programmed now. Very happy with it :)

Show Image
(https://i.imgur.com/vewxE9c.jpg)

Show Image
(https://i.imgur.com/TTaDfWc.jpg)

Show Image
(https://i.imgur.com/cL7EZkM.jpg)

Show Image
(https://i.imgur.com/HCOPYyk.jpg)



It just has stock retooled mx blacks because this is my gaming keyboard




Things I like:
Very low profile, it is impressive how small this board is especially given that it isn't a tray mount
Seams between top and bottom are very small and line up great
Finish is very smooth (noticeably nicer than 360c, mira, lz gh v2, etc)
Heavy (4lbs built)

Things that could be improved:
Plate is pretty snug inside of the top half of the case, have to push down on it somewhat hard to get it to go all the way into the top
Plate switch holes were on the slightly snug side, not too hard to press switches into though (might just be a preference thing)
Little scratches here and there (One scratch on back side of case, shown in 2nd pic. Scratch on plate by the noxary logo. Scratch on brass plate on bottom of board, shown in 4th pic.)
Resistors maybe could be tweaked:
I think the resistors could be changed to allow for better backlighting. Right now my LEDs are incredibly dim even at the highest setting, dimmer than how bright these LEDs were on the lowest possible setting on the 1UP 60 PCB they were on before.
Show Image
(https://i.imgur.com/FgriICW.jpg)

When I have more time I will try to swap them out for something else.

Gorgeous! Looks fantastic.

Good that you were also able to program it accordingly

The resistors sure do look like they need a change -- the backlighting is incredibly dim!
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sun, 24 March 2019, 10:50:27
So mine is all built and programmed now. Very happy with it :)

Show Image
(https://i.imgur.com/vewxE9c.jpg)

Show Image
(https://i.imgur.com/TTaDfWc.jpg)

Show Image
(https://i.imgur.com/cL7EZkM.jpg)

Show Image
(https://i.imgur.com/HCOPYyk.jpg)



It just has stock retooled mx blacks because this is my gaming keyboard




Things I like:
Very low profile, it is impressive how small this board is especially given that it isn't a tray mount
Seams between top and bottom are very small and line up great
Finish is very smooth (noticeably nicer than 360c, mira, lz gh v2, etc)
Heavy (4lbs built)

Things that could be improved:
Plate is pretty snug inside of the top half of the case, have to push down on it somewhat hard to get it to go all the way into the top
Plate switch holes were on the slightly snug side, not too hard to press switches into though (might just be a preference thing)
Little scratches here and there (One scratch on back side of case, shown in 2nd pic. Scratch on plate by the noxary logo. Scratch on brass plate on bottom of board, shown in 4th pic.)
Resistors maybe could be tweaked:
I think the resistors could be changed to allow for better backlighting. Right now my LEDs are incredibly dim even at the highest setting, dimmer than how bright these LEDs were on the lowest possible setting on the 1UP 60 PCB they were on before.
Show Image
(https://i.imgur.com/FgriICW.jpg)

When I have more time I will try to swap them out for something else.

Gorgeous! Looks fantastic.

Good that you were also able to program it accordingly

The resistors sure do look like they need a change -- the backlighting is incredibly dim!
If it weren't for chokkans youtube channel I would be completely lost in terms of building the QMK environment. Once that is set up its all pretty easy though thankfully.  :)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: donut_sauce on Sun, 24 March 2019, 10:52:42
So mine is all built and programmed now. Very happy with it :)

Show Image
(https://i.imgur.com/vewxE9c.jpg)

Show Image
(https://i.imgur.com/TTaDfWc.jpg)

Show Image
(https://i.imgur.com/cL7EZkM.jpg)

Show Image
(https://i.imgur.com/HCOPYyk.jpg)



It just has stock retooled mx blacks because this is my gaming keyboard




Things I like:
Very low profile, it is impressive how small this board is especially given that it isn't a tray mount
Seams between top and bottom are very small and line up great
Finish is very smooth (noticeably nicer than 360c, mira, lz gh v2, etc)
Heavy (4lbs built)

Things that could be improved:
Plate is pretty snug inside of the top half of the case, have to push down on it somewhat hard to get it to go all the way into the top
Plate switch holes were on the slightly snug side, not too hard to press switches into though (might just be a preference thing)
Little scratches here and there (One scratch on back side of case, shown in 2nd pic. Scratch on plate by the noxary logo. Scratch on brass plate on bottom of board, shown in 4th pic.)
Resistors maybe could be tweaked:
I think the resistors could be changed to allow for better backlighting. Right now my LEDs are incredibly dim even at the highest setting, dimmer than how bright these LEDs were on the lowest possible setting on the 1UP 60 PCB they were on before.
Show Image
(https://i.imgur.com/FgriICW.jpg)

When I have more time I will try to swap them out for something else.
Great review. Thanks for posting with pics. A shame about those scratches but great to hear that the finish is high quality.

How is the color matching between top and bottom?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sun, 24 March 2019, 11:00:04
So mine is all built and programmed now. Very happy with it :)

Show Image
(https://i.imgur.com/vewxE9c.jpg)

Show Image
(https://i.imgur.com/TTaDfWc.jpg)

Show Image
(https://i.imgur.com/cL7EZkM.jpg)

Show Image
(https://i.imgur.com/HCOPYyk.jpg)



It just has stock retooled mx blacks because this is my gaming keyboard




Things I like:
Very low profile, it is impressive how small this board is especially given that it isn't a tray mount
Seams between top and bottom are very small and line up great
Finish is very smooth (noticeably nicer than 360c, mira, lz gh v2, etc)
Heavy (4lbs built)

Things that could be improved:
Plate is pretty snug inside of the top half of the case, have to push down on it somewhat hard to get it to go all the way into the top
Plate switch holes were on the slightly snug side, not too hard to press switches into though (might just be a preference thing)
Little scratches here and there (One scratch on back side of case, shown in 2nd pic. Scratch on plate by the noxary logo. Scratch on brass plate on bottom of board, shown in 4th pic.)
Resistors maybe could be tweaked:
I think the resistors could be changed to allow for better backlighting. Right now my LEDs are incredibly dim even at the highest setting, dimmer than how bright these LEDs were on the lowest possible setting on the 1UP 60 PCB they were on before.
Show Image
(https://i.imgur.com/FgriICW.jpg)

When I have more time I will try to swap them out for something else.
Great review. Thanks for posting with pics. A shame about those scratches but great to hear that the finish is high quality.

How is the color matching between top and bottom?
It is pretty good imo. Obviously not perfect, but a lot better than I was expecting. Most of the time there is a shadow that goes down the front or side edge of the case that makes it impossible to tell anyway.

There is a color tone difference on mine, with the top half leaning more towards a reddish hue and the bottom half with a more yellow hue I would say. You can kinda tell in the 2nd pic, ultimately it is what it is. I will say when the case was on it's way to me I had considered that I could either find a place to reanodize it or have it cerakoted, but after having it in front of me I have 0 interest in doing so now. Maybe some cases are worse than mine as far as color matching but mine is acceptable.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: kekstee on Sun, 24 March 2019, 12:35:08
I finally took some pictures, but I'm still busy sorting...

[attachimg=1]

-> pictures here (https://geekhack.org/index.php?topic=35864.msg2739672#msg2739672)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Sun, 24 March 2019, 12:58:27
So mine is all built and programmed now. Very happy with it :)

Show Image
(https://i.imgur.com/vewxE9c.jpg)

Show Image
(https://i.imgur.com/TTaDfWc.jpg)

Show Image
(https://i.imgur.com/cL7EZkM.jpg)

Show Image
(https://i.imgur.com/HCOPYyk.jpg)



It just has stock retooled mx blacks because this is my gaming keyboard




Things I like:
Very low profile, it is impressive how small this board is especially given that it isn't a tray mount
Seams between top and bottom are very small and line up great
Finish is very smooth (noticeably nicer than 360c, mira, lz gh v2, etc)
Heavy (4lbs built)

Things that could be improved:
Plate is pretty snug inside of the top half of the case, have to push down on it somewhat hard to get it to go all the way into the top
Plate switch holes were on the slightly snug side, not too hard to press switches into though (might just be a preference thing)
Little scratches here and there (One scratch on back side of case, shown in 2nd pic. Scratch on plate by the noxary logo. Scratch on brass plate on bottom of board, shown in 4th pic.)

Resistors maybe could be tweaked:
I think the resistors could be changed to allow for better backlighting. Right now my LEDs are incredibly dim even at the highest setting, dimmer than how bright these LEDs were on the lowest possible setting on the 1UP 60 PCB they were on before.
Show Image
(https://i.imgur.com/FgriICW.jpg)

When I have more time I will try to swap them out for something else.

Thanks for such in depth.

On the improvement side, it's worth noting that only the top and bottom pieces were made new at this great manufacturer. The weights and plates were made by a pretty crap place. The small scratch on the back of the case is interesting, I'll pass it onto my rep but not sure what happened there.

Regarding the resistors, good to know. I think this is the first keyboard from me in a while I've seen with full backlighting lol


I finally took some pictures, but I'm still busy sorting...

(Attachment Link)

Brilliant picture, thanks!


aside of the weird black smudges and circles on my weight, quite happy. built with lubed red pandas.

(Attachment Link)

ignore the tmo50

TMO is hard to ignore, it's a great lil board :p
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sun, 24 March 2019, 13:09:36
I finally took some pictures, but I'm still busy sorting...

(Attachment Link)
Looking good, that shade of pink is great :D



So mine is all built and programmed now. Very happy with it :)

Show Image
(https://i.imgur.com/vewxE9c.jpg)

Show Image
(https://i.imgur.com/TTaDfWc.jpg)

Show Image
(https://i.imgur.com/cL7EZkM.jpg)

Show Image
(https://i.imgur.com/HCOPYyk.jpg)



It just has stock retooled mx blacks because this is my gaming keyboard




Things I like:
Very low profile, it is impressive how small this board is especially given that it isn't a tray mount
Seams between top and bottom are very small and line up great
Finish is very smooth (noticeably nicer than 360c, mira, lz gh v2, etc)
Heavy (4lbs built)

Things that could be improved:
Plate is pretty snug inside of the top half of the case, have to push down on it somewhat hard to get it to go all the way into the top
Plate switch holes were on the slightly snug side, not too hard to press switches into though (might just be a preference thing)
Little scratches here and there (One scratch on back side of case, shown in 2nd pic. Scratch on plate by the noxary logo. Scratch on brass plate on bottom of board, shown in 4th pic.)

Resistors maybe could be tweaked:
I think the resistors could be changed to allow for better backlighting. Right now my LEDs are incredibly dim even at the highest setting, dimmer than how bright these LEDs were on the lowest possible setting on the 1UP 60 PCB they were on before.
Show Image
(https://i.imgur.com/FgriICW.jpg)

When I have more time I will try to swap them out for something else.

Thanks for such in depth.

On the improvement side, it's worth noting that only the top and bottom pieces were made new at this great manufacturer. The weights and plates were made by a pretty crap place. The small scratch on the back of the case is interesting, I'll pass it onto my rep but not sure what happened there.

Regarding the resistors, good to know. I think this is the first keyboard from me in a while I've seen with full backlighting lol


I finally took some pictures, but I'm still busy sorting...

(Attachment Link)

Brilliant picture, thanks!


aside of the weird black smudges and circles on my weight, quite happy. built with lubed red pandas.

(Attachment Link)

ignore the tmo50

TMO is hard to ignore, it's a great lil board :p
Ah that is interesting to know. The weight and plate aren't bad per se, it's just that the plate is probably ever so slightly too large where it slots in.

Honestly there could be a chance that scratch on the back came from the original owner, it just seems like it might be under the ano since it didn't take any color off the board.

I'll try to order some resistors and see what works best, any suggestions?


Still though, very happy with the board, it's going to get a lot of use, that is for sure!  ;D
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: MMKB on Sun, 24 March 2019, 13:58:15
I finally took some pictures, but I'm still busy sorting...

(Attachment Link)

I don't think I've seen any front that is as clean and efficient. Heart pumping.  :cool:
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sun, 24 March 2019, 18:41:52
So the caps lock LED is comparatively a lot brighter than the rest of the board. I will investigate this, maybe just a setting I could change in QMK instead of swapping resistors.

Bad phone pic makes rest of the board seem brighter than it really is but:
More
(https://i.imgur.com/gSWf6PO.jpg)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: alveeno on Mon, 25 March 2019, 13:46:53
I received the board today and wanted to clarify some things. I tried digging through the post history (briefly) but didn't find anything.

1) Was there a reason/justification for why all the weights seem to be 01 out of 20?
2) Were there supposed to be bumpons included in the packaging?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Mon, 25 March 2019, 13:52:11
I received the board today and wanted to clarify some things. I tried digging through the post history (briefly) but didn't find anything.

1) Was there a reason/justification for why all the weights seem to be 01 out of 20?
2) Were there supposed to be bumpons included in the packaging?

1) thatís just what was agreed upon with who this board is for.
2) there is, some are on top of the foam, others are inside the package.

Everything else turn out good?  :)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: loktrevor on Mon, 25 March 2019, 14:18:01
I received the board today and wanted to clarify some things. I tried digging through the post history (briefly) but didn't find anything.

1) Was there a reason/justification for why all the weights seem to be 01 out of 20?
2) Were there supposed to be bumpons included in the packaging?
It's 1 out of 20 because there are 20 60Rs and the one you have is 1 of them. c:

Sent from my LG-H932 using Tapatalk

Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Mon, 25 March 2019, 14:58:30
I received the board today and wanted to clarify some things. I tried digging through the post history (briefly) but didn't find anything.

1) Was there a reason/justification for why all the weights seem to be 01 out of 20?
2) Were there supposed to be bumpons included in the packaging?
It's 1 out of 20 because there are 20 60Rs and the one you have is 1 of them. c:

Sent from my LG-H932 using Tapatalk
Yep it's a pretty common practice to number things like that.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: alveeno on Mon, 25 March 2019, 16:02:57
I received the board today and wanted to clarify some things. I tried digging through the post history (briefly) but didn't find anything.

1) Was there a reason/justification for why all the weights seem to be 01 out of 20?
2) Were there supposed to be bumpons included in the packaging?

1) thatís just what was agreed upon with who this board is for.
2) there is, some are on top of the foam, others are inside the package.

Everything else turn out good?  :)

Ah, I see the bumpons now (you even circled it!). Did you send out a form or something asking everyone if they were okay with all the weights saying 1/20? I honestly could've filled it out and forgotten or missed it, I just wanted to ask so I know why, is all.

I think everything else turned out good, I haven't tested the pcb yet but physically I see no flaws/dents/anodizing errors. :)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Mon, 25 March 2019, 17:40:52
I received the board today and wanted to clarify some things. I tried digging through the post history (briefly) but didn't find anything.

1) Was there a reason/justification for why all the weights seem to be 01 out of 20?
2) Were there supposed to be bumpons included in the packaging?

1) thatís just what was agreed upon with who this board is for.
2) there is, some are on top of the foam, others are inside the package.

Everything else turn out good?  :)

Ah, I see the bumpons now (you even circled it!). Did you send out a form or something asking everyone if they were okay with all the weights saying 1/20? I honestly could've filled it out and forgotten or missed it, I just wanted to ask so I know why, is all.

I think everything else turned out good, I haven't tested the pcb yet but physically I see no flaws/dents/anodizing errors. :)

No, iirc all the details were decided in private then I just saw who was interested. :)

Great to hear.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: exanile_tabasco on Tue, 26 March 2019, 18:38:38
It's been one long ride through X60 and X60R. Looks like the wait paid off.

(https://i.imgur.com/oqk1K7a.jpg)

(https://i.imgur.com/PJKyKXC.jpg)

(https://i.imgur.com/udUPBXZ.jpg)

Finish and quality is 11/10. I see that people aren't taking kindly to how tight the plate is in the top piece, but the result is a very well-aligned board.

All the scratches, dings and marks are in the bottom of the weight. I'm still pondering what to do about that, but there's no hurry. The board itself is gorgeous.

As a blue gray case, mine lost the colour matching lottery; the bottom piece is more blue and the top is more gray. Doesn't bother me though; I just think of it as giving the board personality :))

Runs on stock Tealios for now, newly restocked as of yesterday and in my hands as of today. With how good they feel (this is my home board, so there are no noise concerns), my other boards will be the first to get the lube treatment.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: frostbyte-gaming on Tue, 26 March 2019, 18:59:11
Finally finished building my X60R today and I just so happened to receive Red Riot today as well so I figured I may as well try it on for a little while.

[attachimg=1]

Loving this board so far very solid feeling and I must say the Reset switch on top has to be one of the most genius things I've ever seen on a keyboard and is a god send considering X60R has 10 screws holding it together.

Concerning my anodization the Silver came out great and both halves match together perfectly, probably one of the benefits of picking a safe color like Silver.

Overall I must say that I am quite happy with this board and hope Xondat keeps up with this quality with his future projects. 10/10
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Tue, 26 March 2019, 19:14:11
Finally finished building my X60R today and I just so happened to receive Red Riot today as well so I figured I may as well try it on for a little while.

(Attachment Link)

Loving this board so far very solid feeling and I must say the Reset switch on top has to be one of the most genius things I've ever seen on a keyboard and is a god send considering X60R has 10 screws holding it together.

Concerning my anodization the Silver came out great and both halves match together perfectly, probably one of the benefits of picking a safe color like Silver.

Overall I must say that I am quite happy with this board and hope Xondat keeps up with this quality with his future projects. 10/10
Yeah the reset switch is pretty cool. I've always preferred a physical switch over one hidden inside a layer, so this one is great. And only need to remove the caps lock key.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: ArchDill on Tue, 26 March 2019, 19:24:23
What does the height of these look like, compared to an hhkb?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Rafa_n on Tue, 26 March 2019, 19:50:58
How did you guys program the pcb? It's not on qmk configurator.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Tue, 26 March 2019, 20:01:49
How did you guys program the pcb? It's not on qmk configurator.
Cant use the configurator yet.

If you need help this series is really useful:
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Rafa_n on Tue, 26 March 2019, 20:24:57
How did you guys program the pcb? It's not on qmk configurator.
Cant use the configurator yet.

If you need help this series is really useful:

I tried following that, but he uses a satan pcb as a starting point, what should I use?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Tue, 26 March 2019, 20:30:33
How did you guys program the pcb? It's not on qmk configurator.
Cant use the configurator yet.

If you need help this series is really useful:
I tried following that, but he uses a satan pcb as a starting point, what should I use?

This https://github.com/Rozakiin/Noxary_Firmware

The 260 one in specific :)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Rafa_n on Tue, 26 March 2019, 20:32:14
How did you guys program the pcb? It's not on qmk configurator.
Cant use the configurator yet.

If you need help this series is really useful:
I tried following that, but he uses a satan pcb as a starting point, what should I use?

This https://github.com/Rozakiin/Noxary_Firmware

The 260 one in specific :)

Ah, that's what I was missing, thanks :)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Vadurr on Tue, 26 March 2019, 21:05:17
Has anyone been able to line this with sorb?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: megaforce93 on Wed, 27 March 2019, 13:52:19
Finally finished building my X60R today and I just so happened to receive Red Riot today as well so I figured I may as well try it on for a little while.

(Attachment Link)

Loving this board so far very solid feeling and I must say the Reset switch on top has to be one of the most genius things I've ever seen on a keyboard and is a god send considering X60R has 10 screws holding it together.

Concerning my anodization the Silver came out great and both halves match together perfectly, probably one of the benefits of picking a safe color like Silver.

Overall I must say that I am quite happy with this board and hope Xondat keeps up with this quality with his future projects. 10/10



Nice desk and map!!!!
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Puddsy on Wed, 27 March 2019, 14:45:01
It's been one long ride through X60 and X60R. Looks like the wait paid off.

Show Image
(https://i.imgur.com/oqk1K7a.jpg)


Show Image
(https://i.imgur.com/PJKyKXC.jpg)


Show Image
(https://i.imgur.com/udUPBXZ.jpg)


Finish and quality is 11/10. I see that people aren't taking kindly to how tight the plate is in the top piece, but the result is a very well-aligned board.

All the scratches, dings and marks are in the bottom of the weight. I'm still pondering what to do about that, but there's no hurry. The board itself is gorgeous.

As a blue gray case, mine lost the colour matching lottery; the bottom piece is more blue and the top is more gray. Doesn't bother me though; I just think of it as giving the board personality :))

Runs on stock Tealios for now, newly restocked as of yesterday and in my hands as of today. With how good they feel (this is my home board, so there are no noise concerns), my other boards will be the first to get the lube treatment.

holy **** those are... not even close
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: loktrevor on Wed, 27 March 2019, 14:47:24
It's been one long ride through X60 and X60R. Looks like the wait paid off.

Show Image
(https://i.imgur.com/oqk1K7a.jpg)


Show Image
(https://i.imgur.com/PJKyKXC.jpg)


Show Image
(https://i.imgur.com/udUPBXZ.jpg)


Finish and quality is 11/10. I see that people aren't taking kindly to how tight the plate is in the top piece, but the result is a very well-aligned board.

All the scratches, dings and marks are in the bottom of the weight. I'm still pondering what to do about that, but there's no hurry. The board itself is gorgeous.

As a blue gray case, mine lost the colour matching lottery; the bottom piece is more blue and the top is more gray. Doesn't bother me though; I just think of it as giving the board personality :))

Runs on stock Tealios for now, newly restocked as of yesterday and in my hands as of today. With how good they feel (this is my home board, so there are no noise concerns), my other boards will be the first to get the lube treatment.

holy **** those are... not even close
Very nice observation. Well done.

Sent from my LG-H932 using Tapatalk

Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: exanile_tabasco on Wed, 27 March 2019, 15:01:33
holy **** those are... not even close

They are reasonably close in colour. What you see after Photoshop is not what you get irl. :)) I wanted to emphasize the blue.

A few years ago, I would have been really irked to see something like this. Somewhere along the line, I learned to accept that life has inevitable imperfections, and more often than not, it costs way more in terms of money, time, well-being and relations to correct the imperfection than it's worth. If I was still that person, I'd still be bent over at my station right now resoldering the left shift key, which is rotated a few degrees clockwise unless I "tweak" it for photos. If I was still that person, I wouldn't be modding my dream truck right now and would instead be trying to throw money into the water to get into another one (which, in 2019, regardless of make, would be prone to just as many problems), just because it has a few "issues" that require a bit of time and effort to correct.

Plus, what would have been my X60 was utterly destroyed and unusable in that state. Aside from the colour, the quality on the X60 R is impeccable. I'll gladly take it.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: mdlt97 on Wed, 27 March 2019, 16:38:17
It's been one long ride through X60 and X60R. Looks like the wait paid off.

Show Image
(https://i.imgur.com/oqk1K7a.jpg)


Show Image
(https://i.imgur.com/PJKyKXC.jpg)


Show Image
(https://i.imgur.com/udUPBXZ.jpg)


Finish and quality is 11/10. I see that people aren't taking kindly to how tight the plate is in the top piece, but the result is a very well-aligned board.

All the scratches, dings and marks are in the bottom of the weight. I'm still pondering what to do about that, but there's no hurry. The board itself is gorgeous.

As a blue gray case, mine lost the colour matching lottery; the bottom piece is more blue and the top is more gray. Doesn't bother me though; I just think of it as giving the board personality :))

Runs on stock Tealios for now, newly restocked as of yesterday and in my hands as of today. With how good they feel (this is my home board, so there are no noise concerns), my other boards will be the first to get the lube treatment.


ima be real with you here

you're either Jessica's alt

or you ordered a 2 tone board

I am unable to allow myself to think that you ordered the same color top and bottom

that is simply navy blue and royal blue
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Wed, 27 March 2019, 16:43:32
holy **** those are... not even close

ima be real with you here

you're either Jessica's alt

or you ordered a 2 tone board

I am unable to allow myself to think that you ordered the same color top and bottom

that is simply navy blue and royal blue

Thanks for your comment babes :-*

Any factory recommendations so I can improve it for the future? I know you two know a lot about manufacturing & anodizing, and sounds like you want to help out.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Puddsy on Wed, 27 March 2019, 17:46:53
holy **** those are... not even close

ima be real with you here

you're either Jessica's alt

or you ordered a 2 tone board

I am unable to allow myself to think that you ordered the same color top and bottom

that is simply navy blue and royal blue

Thanks for your comment babes :-*

Any factory recommendations so I can improve it for the future? I know you two know a lot about manufacturing & anodizing, and sounds like you want to help out.

that's QC not factory my dude, don't take this one off yourself

you saw that and decided it was up to your standard to ship out

you could have gotten it and went to the anodizer and said "hey these are two different colors when they are supposed to match"

there is no evidence that you tried to correct this issue
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Wed, 27 March 2019, 18:16:02
there is no evidence that you tried to correct this issue

Read the thread instead of just commenting for post count ffs
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: loktrevor on Wed, 27 March 2019, 18:23:38
holy **** those are... not even close

ima be real with you here

you're either Jessica's alt

or you ordered a 2 tone board

I am unable to allow myself to think that you ordered the same color top and bottom

that is simply navy blue and royal blue

Thanks for your comment babes :-*

Any factory recommendations so I can improve it for the future? I know you two know a lot about manufacturing & anodizing, and sounds like you want to help out.

that's QC not factory my dude, don't take this one off yourself

you saw that and decided it was up to your standard to ship out

you could have gotten it and went to the anodizer and said "hey these are two different colors when they are supposed to match"

there is no evidence that you tried to correct this issue
If you read xondat's posts on the 14th and 15th of February you would see that he tried to see if the factory could fix the issues that he had seen. It's not really on him that this was within their tolerances, but hey don't have to read a thread to call someone out, eh?

Sent from my LG-H932 using Tapatalk
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Puddsy on Wed, 27 March 2019, 18:29:26
there is no evidence that you tried to correct this issue

Read the thread instead of just commenting for post count ffs

what was stopping you from getting the boards refinished locally?

and did you message the recipient of that board to make sure they were OK with the quality?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: exanile_tabasco on Wed, 27 March 2019, 19:21:26

ima be real with you here

you're either Jessica's alt

or you ordered a 2 tone board

I am unable to allow myself to think that you ordered the same color top and bottom

that is simply navy blue and royal blue

I take it that this "jessica" is some breed of shill, and being labelled as such is supposed to hurt my feelings?  :blank:

You're smart, so try this one; it's called reading comprehension. I've already clarified previously that the difference between top and bottom is minimal irl, but I took the opportunity to draw out the blue when I was working on my photos afterwards, because I liked the vibrant look. Look at the other Blue Gray boards in this buy and you'll realize that the colour is far more subdued.

It's not a requisite that you "allow [your]self to think" that the top and bottom are identical. I never made that claim, either. Were you part of the R buy?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: LightningXI on Wed, 27 March 2019, 20:06:25
It's been one long ride through X60 and X60R. Looks like the wait paid off.

Show Image
(https://i.imgur.com/oqk1K7a.jpg)


Show Image
(https://i.imgur.com/PJKyKXC.jpg)


Show Image
(https://i.imgur.com/udUPBXZ.jpg)


Finish and quality is 11/10. I see that people aren't taking kindly to how tight the plate is in the top piece, but the result is a very well-aligned board.

All the scratches, dings and marks are in the bottom of the weight. I'm still pondering what to do about that, but there's no hurry. The board itself is gorgeous.

As a blue gray case, mine lost the colour matching lottery; the bottom piece is more blue and the top is more gray. Doesn't bother me though; I just think of it as giving the board personality :))

Runs on stock Tealios for now, newly restocked as of yesterday and in my hands as of today. With how good they feel (this is my home board, so there are no noise concerns), my other boards will be the first to get the lube treatment.

Looks clean - the mismatch could be considered a bit unfortunate, but if it doesn't bother the customer, then it's all good :thumb:

Love those RGBW mods with OG Beige, a great classic combo! And the Cherry Enter is.... well, the cherry on top :raughs:
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Yeoh on Wed, 27 March 2019, 20:26:44
there is no evidence that you tried to correct this issue

Read the thread instead of just commenting for post count ffs

what was stopping you from getting the boards refinished locally?

and did you message the recipient of that board to make sure they were OK with the quality?

Pretty ****in rich coming from someone who is bumbling their way through a keycap gb (without manufacturing any extras) and telling people with problems to use tape/plastic on their loose caps, simply because they "dont want to deal with the manufacturer" again.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Puddsy on Wed, 27 March 2019, 20:27:26
there is no evidence that you tried to correct this issue

Read the thread instead of just commenting for post count ffs

what was stopping you from getting the boards refinished locally?

and did you message the recipient of that board to make sure they were OK with the quality?

Pretty ****in rich coming from someone who is bumbling their way through a keycap gb (without manufacturing any extras) and telling people with problems to use tape/plastic on their loose caps, simply because they "dont want to deal with the manufacturer" again.

There are 200 extra sets and the manufacturer told me they didn't have budget to fix the existing ones but ok

Keycaps are very different from keyboards

and further to the point people have been tape tricking gmk caps for years and nobody has rioted about it cause the fix is piss easy
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Yeoh on Wed, 27 March 2019, 20:44:16
there is no evidence that you tried to correct this issue

Read the thread instead of just commenting for post count ffs

what was stopping you from getting the boards refinished locally?

and did you message the recipient of that board to make sure they were OK with the quality?

Pretty ****in rich coming from someone who is bumbling their way through a keycap gb (without manufacturing any extras) and telling people with problems to use tape/plastic on their loose caps, simply because they "dont want to deal with the manufacturer" again.

There are 200 extra sets and the manufacturer told me they didn't have budget to fix the existing ones but ok

Keycaps are very different from keyboards

and further to the point people have been tape tricking gmk caps for years and nobody has rioted about it cause the fix is piss easy

There is no evidence that you tried to correct this issue.

Whats stopping you from getting the keycaps replaced then?

And did you message the recipient of the caps to make sure they were ok with the quality?
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Puddsy on Wed, 27 March 2019, 20:53:18
there is no evidence that you tried to correct this issue

Read the thread instead of just commenting for post count ffs

what was stopping you from getting the boards refinished locally?

and did you message the recipient of that board to make sure they were OK with the quality?

Pretty ****in rich coming from someone who is bumbling their way through a keycap gb (without manufacturing any extras) and telling people with problems to use tape/plastic on their loose caps, simply because they "dont want to deal with the manufacturer" again.

There are 200 extra sets and the manufacturer told me they didn't have budget to fix the existing ones but ok

Keycaps are very different from keyboards

and further to the point people have been tape tricking gmk caps for years and nobody has rioted about it cause the fix is piss easy

There is no evidence that you tried to correct this issue.

Whats stopping you from getting the keycaps replaced then?

And did you message the recipient of the caps to make sure they were ok with the quality?

i am short the three thousand dollars it would take to get the molds up to the standard you're looking for since i already forfeited my share of the profit (about $700) to actually have the sets made

to get the keycaps fully replaced it would cost about 10x that, to reanodize/refinish a keyboard it costs about $100

considering xondat's openness with his profits on his gbs i am fairly sure he has that kicking around

when it comes to that last question, at least red riot came out the right color and yolch is negligibly close. it's also worth noting that less that, i'm not aware of any complaints about red riot/yolch

if you wanna continue this piece of discourse please PM me, i didn't intend to threadcrap nearly as hard as i've ended up doing.

i honestly should have pm'd xondat instead of posting this but i didn't wanna unblock him on discord
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: loktrevor on Wed, 27 March 2019, 20:58:04
there is no evidence that you tried to correct this issue

Read the thread instead of just commenting for post count ffs

what was stopping you from getting the boards refinished locally?

and did you message the recipient of that board to make sure they were OK with the quality?

Pretty ****in rich coming from someone who is bumbling their way through a keycap gb (without manufacturing any extras) and telling people with problems to use tape/plastic on their loose caps, simply because they "dont want to deal with the manufacturer" again.

There are 200 extra sets and the manufacturer told me they didn't have budget to fix the existing ones but ok

Keycaps are very different from keyboards

and further to the point people have been tape tricking gmk caps for years and nobody has rioted about it cause the fix is piss easy

There is no evidence that you tried to correct this issue.

Whats stopping you from getting the keycaps replaced then?

And did you message the recipient of the caps to make sure they were ok with the quality?

i am short the three thousand dollars it would take to get the molds up to the standard you're looking for since i already forfeited my share of the profit (about $700) to actually have the sets made

to get the keycaps fully replaced it would cost about 10x that, to reanodize/refinish a keyboard it costs about $100

considering xondat's openness with his profits on his gbs i am fairly sure he has that kicking around

when it comes to that last question, at least red riot came out the right color and yolch is negligibly close. it's also worth noting that less that, i'm not aware of any complaints about red riot/yolch

if you wanna continue this piece of discourse please PM me, i didn't intend to threadcrap nearly as hard as i've ended up doing.

i honestly should have pm'd xondat instead of posting this but i didn't wanna unblock him on discord
nice

Sent from my LG-H932 using Tapatalk

Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: xondat on Wed, 27 March 2019, 20:58:13
considering xondat's openness with his profits on his gbs i am fairly sure he has that kicking around

when it comes to that last question, at least red riot came out the right color and yolch is negligibly close. it's also worth noting that less that, i'm not aware of any complaints about red riot/yolch

if you wanna continue this piece of discourse please PM me, i didn't intend to threadcrap nearly as hard as i've ended up doing.

I'm negative over $5000 from this buy.

I haven't had any complaints about X60 R from owners. You're the only person to complain actually.

Now stop thread crapping. Thanks.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Puddsy on Wed, 27 March 2019, 20:59:24
considering xondat's openness with his profits on his gbs i am fairly sure he has that kicking around

when it comes to that last question, at least red riot came out the right color and yolch is negligibly close. it's also worth noting that less that, i'm not aware of any complaints about red riot/yolch

if you wanna continue this piece of discourse please PM me, i didn't intend to threadcrap nearly as hard as i've ended up doing.

I'm negative over $5000 from this buy.

I haven't had any complaints about X60 R from owners. You're the only person to complain actually.

Now stop thread crapping. Thanks.

we square then, that's a fine explanation

ill go back to my cave now
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: bciamny on Wed, 27 March 2019, 21:20:04
while all of that was genuinely funny to read, i'm glad exanile is happy. your shots also show just how nice the spacing tolerances are between the caps and the top piece. the isometric shot also shows how nicely the leftmost column of keycaps' bottoms align meet the height of the top piece.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: Rafa_n on Thu, 28 March 2019, 10:09:46
Let's get back on topic ok?

Here is my build, except for the little black spots on the brass parts, i'm really happy with it  :D

(https://i.imgur.com/GqirRAv.jpg)
(https://i.imgur.com/dHGAobl.jpg)
(https://i.imgur.com/IT8jcyM.jpg)
(https://i.imgur.com/z1xRhuX.jpg)
(https://i.imgur.com/uWom1Qu.jpg)



Full Build Log https://imgur.com/gallery/wvM1mup (https://imgur.com/gallery/wvM1mup)

Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: kevinzavier on Thu, 28 March 2019, 12:04:04
All these look delicious, I really like the blue one, especially the top
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: tomusan on Thu, 28 March 2019, 15:40:09
Let's get back on topic ok?

Here is my build, except for the little black spots on the brass parts, i'm really happy with it  :D

Show Image
(https://i.imgur.com/GqirRAv.jpg)

Show Image
(https://i.imgur.com/dHGAobl.jpg)

Show Image
(https://i.imgur.com/IT8jcyM.jpg)

Show Image
(https://i.imgur.com/z1xRhuX.jpg)

Show Image
(https://i.imgur.com/uWom1Qu.jpg)




Full Build Log https://imgur.com/gallery/wvM1mup (https://imgur.com/gallery/wvM1mup)

ooh baby v v nice  :thumb:
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: OtherAndrew on Thu, 28 March 2019, 15:49:52
Let's get back on topic ok?

Here is my build, except for the little black spots on the brass parts, i'm really happy with it  :D

Show Image
(https://i.imgur.com/GqirRAv.jpg)

Show Image
(https://i.imgur.com/dHGAobl.jpg)

Show Image
(https://i.imgur.com/IT8jcyM.jpg)

Show Image
(https://i.imgur.com/z1xRhuX.jpg)

Show Image
(https://i.imgur.com/uWom1Qu.jpg)




Full Build Log https://imgur.com/gallery/wvM1mup (https://imgur.com/gallery/wvM1mup)

never before have i wanted to touch a keyboard inappropriately
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: exanile_tabasco on Thu, 28 March 2019, 16:49:21
Let's get back on topic ok?

Here is my build, except for the little black spots on the brass parts, i'm really happy with it  :D

Show Image
(https://i.imgur.com/GqirRAv.jpg)

Show Image
(https://i.imgur.com/dHGAobl.jpg)

Show Image
(https://i.imgur.com/IT8jcyM.jpg)

Show Image
(https://i.imgur.com/z1xRhuX.jpg)

Show Image
(https://i.imgur.com/uWom1Qu.jpg)


Full Build Log https://imgur.com/gallery/wvM1mup (https://imgur.com/gallery/wvM1mup)

We all posting to reddit too, huh?   :D

I love the white countertop. I have a giant white island that I don't make nearly enough use of for photos. In those photos, it's almost like your board is white micro-arc; the surface looks so smooth. Spot-on use of Muted.  :thumb:
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: futurecrime on Thu, 28 March 2019, 18:15:45
These look bloody lovely and I want one.
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: pr0ximity on Thu, 28 March 2019, 21:15:14
ngl, the low-profile front does look really nice
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: dantambok on Fri, 29 March 2019, 05:26:41
These look bloody lovely and I want one.

same lol
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Fri, 29 March 2019, 15:57:25
 :)
(https://i.imgur.com/pw8nDX3.jpg)
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: regionfree on Fri, 29 March 2019, 23:05:50
Finished my Taro build. All that's left is programming this to use my layout. Clean and yummy.

[attachimg=4]

[attachimg=1]

[attachimg=2]

[attachimg=3]
Title: Re: [GB] Noxary X60 R (100% Shipped)
Post by: HPE1000 on Sat, 30 March 2019, 09:02:29
Finished my Taro build. All that's left is programming this to use my layout. Clean and yummy.

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)
Wow.. that is amazing
Title: Re: [GB] Noxary X60 R (Complete)
Post by: HPE1000 on Sat, 13 April 2019, 08:52:23
So I swapped out the resistors to 150 ohm (were 400ish before)
 0 impact on the brightness. I am clearly not doing something right lol
Title: Re: [GB] Noxary X60 R (Complete)
Post by: clasicks on Sat, 13 April 2019, 09:26:10
So I swapped out the resistors to 150 ohm (were 400ish before)
 0 impact on the brightness. I am clearly not doing something right lol

could it be something related to the qmk setup?

https://github.com/qmk/qmk_firmware/blob/master/docs/feature_backlight.md


Title: Re: [GB] Noxary X60 R (Complete)
Post by: HPE1000 on Sat, 13 April 2019, 09:46:03
So I swapped out the resistors to 150 ohm (were 400ish before)
 0 impact on the brightness. I am clearly not doing something right lol

could it be something related to the qmk setup?

https://github.com/qmk/qmk_firmware/blob/master/docs/feature_backlight.md
Yeah I tried that and nothing I did helped.