geekhack

geekhack Marketplace => Interest Checks => Topic started by: ilouis_07 on Wed, 17 October 2018, 04:51:53

Title: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)
Post by: ilouis_07 on Wed, 17 October 2018, 04:51:53
Good day everyone!

GB link: https://geekhack.org/index.php?topic=99711.msg2732481#msg2732481

Hi
it's ilouix_07,
Today I am here with an Interest Check for my latest project: The Volcano660.
This IC is a bit different. This is the first time that I am sharing my personal design. A project that I have developed with my team TianYue Lab. This is also the first time that I am working with manufacturers, so I hope you can be patient with me:p

First up, I proudly present to everyone a "weapon" which will immediately be familiar to most in our community members as it's size and layout is mostly derived from the Leopold FC660M/C.

I called the design the Volcano660, V660 or V66 in short. I haven't decided on either one yet. But, I will keep "Volcano" as the name for my line of keyboard designs for it holds a special meaning to me.

Here is a short IC form for you:
https://goo.gl/forms/FCM1S8zj8sIvHtne2

Please click here to find out more about gasket mounting and Volcano660:
https://goo.gl/LAHjJ6

For more updates, you can follow my instagram:
https://www.instagram.com/louix_07/
 
------------------------------------------------------------------------
Some Q&A here for the curious ones:
Q: If you ask why the name Volcano?
A: Volcanoes are very quiet on the exterior and can be very explosive when you dig deep into their cores. This actually pictures the keyboard's characteristics I am aiming to produce perfectly. The plan was to design an outer case with very simplistic styling cues to match the utilitarian concept I have in my mind. Combine the case with a very tight, compact key layout, a solid inner construction and this becomes that "silent beast" I have been sketching.....
 
Q: Why this design, the 660 layout?
A: None of the bells and whistles like RGB underglow or fanciful styling side cuts on bezel. Because, I strongly believed in that a true custom keyboard should be typed on and to be experienced by the touch first and foremost. Not just to be viewed as beautiful collectibles and left on the shelf and gather dust if I put it bluntly. Also, I have done enough of 60% already and wanted to progress gradually to other larger layouts.
So you can say the keyboard I've designed looks like a fully programmable FC660 cased in an aluminum outer shell. But,I will tell you it's not the same in every single angle the way I viewed it. Down to even the top surface and the bottom, I think I should let everyone find that little surprise in the pictures I am going to leak.
 
Q: What do you actually want to set out to achieve with this kit?
A: With all those ideas I've saved up until now, I set out to design the V66/660 with a single goal in mind and that is offer it with the best in all aspects of a premium custom kit. Give it a solid CNC milled case with the finer anodizing treatments I can find, offer every kit in the best conditions that I can possibly.
 
------------------------------------------------------------------------
I believed everything has to do with how keyboards are constructed internally. With that said, I have only seen such mounting methods ever used on a few premiums and also only on the more costly custom kits made in the past....
 
And if I haven't hinted enough already, then......
A picture paints a thousand words, I will let the images show you what I have been looking to realize.
 
I cannot stress enough that this will be one of the more interesting/unique kit.
So, let us enjoy the excitement of an Interest Check first before we talk shop with the full specifications later when I launch this very special buy.

Happy typing, Everyone! ;)
Volcano660 + GMK9009
(https://imgur.com/7GbtiW7.png)
top view
(https://imgur.com/wTJAWrI.png)
side view
(renders done by janglad_, updated on 1st/Nov)

(https://imgur.com/bbyR6BL.jpg)
Disassembled pic

(https://imgur.com/iSpW21y.png)
render 1
(https://imgur.com/Za1xpAz.png)
render 2
(https://imgur.com/GmvElWd.png)
with sa profile keycap
(https://imgur.com/hIW7aHj.png)
with cherry profile keycap
(https://imgur.com/odpogG6.png)
Redesigned weight
(https://imgur.com/uYkiduB.png)
Top case
(https://imgur.com/kNHkULF.png)
Connector cut out(Type C updated 4th Nov)


Specifications:
1. Made with 6063 aluminium for case body, brass for plate and weight.

2. Gasket Mounting Design. (To read more about the gasket mount: https://goo.gl/LAHjJ6)

3. Typing angle is 5 degrees.

4. Case has a natural curved CNC milled top. Option for straight edged CNC milled top will be offered.

5. support for ISO plate available

6. USB type C connector

7. Nett weight of each keyboard case is approximately 2.7KG.

8. Premium materials will be used for the packaging of each keyboard. Boxes will include all case accessories inside eg: 16 pcs of rubber dampers, gold screws in M3 sizing and rubber feet.


Design:
you may check out this short video:
https://www.instagram.com/p/Bpb8g_RjD2-/?utm_source=ig_web_button_share_sheet

Colors:
TBD

PCB:
Now i have found 2 PCB solutions:
1. Bootmapper semi-transparent PCB from Percent Studio Designer.
2. QMK PCB from Percent Studio Designer.(updated by 25/Oct)

We will now be working with Clueboard for the Volcanoís PCB. It will feature a QMK PCB designed by u/skullydazed @clueboards!(Nov 10)

price:
estimated 330 usd per set.(edited by 25th/Oct)
Estimated price will likely see an increase due to the changes made to PCB. please see Update1 in below (Nov 10)


For more, will update soon.

Feels free to follow my instagram for more keyboards and designs:
https://www.instagram.com/louix_07/

Thanks
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 04:52:25
Updates:
More
update 1(10th Nov)
Change of PCB:

We hear you! We want to provide everyone with a higher quality keyboard, and have decided on quite a major change to improve the Volcano660. We will now be working with Clueboard for the Volcanoís PCB. It will feature a QMK PCB designed by u/skullydazed @clueboards!



Changes to timeline:

Due to the change of PCB vendor, we will need to make adjustments to / redesign the current case. The new prototype is slated to arrive in 6-7 weeks.



In the meantimeÖ

Colour samples: We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660.

We might ask them to give us samples of these colours:
(https://imgur.com/MEncv8t.png)
Will keep everyone posted after receiving samples of the anodizing.

To Do List:
More
0. Determine the anodizing colors for GB.(05 Nov)
1. PCB compatible with alps switch.
2. Plate for alps switch.
3. Prototype.
4. Assemble it, video for typing sound.
5. if everything is ready, let's make this GB happen.

what i have done?
More
1. Finish the final design with my team.(27/Oct)
2. Paid prototype fee, prototype may take 2 weeks starting from the end of Oct.
3. 30th/Oct, proto payment refunded from factory, proto price increased:(
4. Render Finished.(30th Oct)
5. New factory found for prototyping.(31th OCt)
6. Factory cant provide estimated prototyping time, so prototyping cancelled again:(3th Nov)
7. Prototype factory confirmed, est time for prototype arrive my side is about mid of Dec.(5th Nov)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Geckt on Wed, 17 October 2018, 04:54:04
Hot, damn!

*ready to pounce*

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: SteffeMK on Wed, 17 October 2018, 05:41:52
I do like the simplicity of it!

Skickat frŚn min SM-N950F via Tapatalk

Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Dovan1405 on Wed, 17 October 2018, 06:27:14
1 for me please. Also can you show the underside of the board?


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: UsualSuspectXXX on Wed, 17 October 2018, 07:01:46
I'd be in for one!

The option of the BT pcb sounds pretty cool, so that'd be my vote.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: _ODIN_ on Wed, 17 October 2018, 07:09:19
This is amazing (been following this project on Instagram). Would you consider adding ISO support. It doesn't need to be on the main plate (I can totally understand why people don't want that), I would pay extra for the separate plate.

Really looking forward to this!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: lbassett21 on Wed, 17 October 2018, 07:18:32
Wow, I love the look of this, I'm in!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 07:22:04
Hot, damn!

*ready to pounce*

Sent from my G8142 using Tapatalk
thanks:)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 07:24:01
1 for me please. Also can you show the underside of the board?


Sent from my iPhone using Tapatalk
the final design for the base haven't decided yet. Now is blank :P
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 07:26:06
This is amazing (been following this project on Instagram). Would you consider adding ISO support. It doesn't need to be on the main plate (I can totally understand why people don't want that), I would pay extra for the separate plate.

Really looking forward to this!
Thanks buddy, i will count ISO plate in for sure, but i won't do universal plate(for enter key). So it will be separate ISO plate and standard plate:)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Kasterborous on Wed, 17 October 2018, 08:04:15
Yasss

Sent from my HTC 10 using Tapatalk

Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Geckt on Wed, 17 October 2018, 09:01:31
I liked the idea of the concealed bottom weight, some of the keyboards I owned with weights showing on the bottoms sounds hollow without insulation foam in them.

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Dovan1405 on Wed, 17 October 2018, 09:08:54
1 for me please. Also can you show the underside of the board?


Sent from my iPhone using Tapatalk
the final design for the base haven't decided yet. Now is blank :P


Hope it wont stay blank and show some accents of the brass or something.

Also plate material options like pc or copper would be really interesting with a gasket mount. Hope your factory is able to do it :)


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: _ODIN_ on Wed, 17 October 2018, 09:25:37
This is amazing (been following this project on Instagram). Would you consider adding ISO support. It doesn't need to be on the main plate (I can totally understand why people don't want that), I would pay extra for the separate plate.

Really looking forward to this!
Thanks buddy, i will count ISO plate in for sure, but i won't do universal plate(for enter key). So it will be separate ISO plate and standard plate:)
Amazing! Thanks a lot
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: _ODIN_ on Wed, 17 October 2018, 09:26:30
+1 for brass weight in the back ;)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 09:34:00
+1 for brass weight in the back ;)
have 3 options, haven't decided yet:
1, inside
2, go through the base like "T" shape
3, outside

personally, i prefer 1 or 3.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Geckt on Wed, 17 October 2018, 09:39:53
+1 for brass weight in the back ;)
have 3 options, haven't decided yet:
1, inside
2, go through the base like "T" shape
3, outside

personally, i prefer 1 or 3.
+1

Anything but cut a hole to show the weight through it like no.2 option you said.

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Mcnos on Wed, 17 October 2018, 10:35:35
I'm innnnn!!

This was the 660 I've been waiting for
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: bobdenard on Wed, 17 October 2018, 11:25:46
You had me at Bluetooth (canít stand cables) :)
Good luck, thatís a great looking board!


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: M on Wed, 17 October 2018, 11:33:50
any chance of Alps support?
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: oh_chesteroni on Wed, 17 October 2018, 12:09:16
Count me in!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: merlin64 on Wed, 17 October 2018, 12:58:17
Will clueboard PCBs fit this? Will FC660m PCBs fit this?
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Krelbit on Wed, 17 October 2018, 13:08:07
good luck

gaskets are a ***** and a half
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: g_mr_p on Wed, 17 October 2018, 13:19:54
Love the 660 layout, following this project with tentative interest.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: KaosJ on Wed, 17 October 2018, 13:58:26
Interested.

Just a question, why the brass weight doesn't show up from the bottom? 
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: The_judge_168 on Wed, 17 October 2018, 16:17:22
Looks great! In for one.

Always interested in more 66 key layouts.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Chemos on Wed, 17 October 2018, 17:10:28
That's an intersting design on my favorite layout. In for 1.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: V. Vega on Wed, 17 October 2018, 17:14:21
I'll be honest, I'm not really sure I understand what the gaskets do. But! I'm always up for trying new and different things. I also really like this aesthetically and that it's a 65-ish with a seemingly standard layout. I would get one!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Tree_ on Wed, 17 October 2018, 17:31:12
Exterior weight in my opinion.

Colour options?
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 19:37:07
Love the 660 layout, following this project with tentative interest.
Thanks
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 19:40:11
Interested.

Just a question, why the brass weight doesn't show up from the bottom?
Itís option 3, I will do more renders for all the options.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 19:42:28
Exterior weight in my opinion.

Colour options?
Color options tbd when prototyping, I will update it after a while:)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: lundmore on Wed, 17 October 2018, 20:56:48
Interesting,

What are the heights of front and rear?
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: schoolbus on Wed, 17 October 2018, 21:28:50
when is someone going to make a gasket mount 75%
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Wed, 17 October 2018, 22:05:38
I'll be honest, I'm not really sure I understand what the gaskets do. But! I'm always up for trying new and different things. I also really like this aesthetically and that it's a 65-ish with a seemingly standard layout. I would get one!
Actually this mounting system can produce a better bottom sound when you typing, the rubber between plate and case will remove or reduce the unwanted vibrations. Instead of using TOP/Bottom mounting, I believed that this gasket mount can add a compression force on plate when we tight the screws. When user typing on the keyboard, the force will be decomposed to thousands of contact points on rubber stripe(instead of 6-8 screws point for top/bottom mounting system). Itís a tricky problem but I will try my best to make it happens.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: dr_unconscionable on Thu, 18 October 2018, 00:55:34
Super interested in this! I love the look of the 660 layout, and have been curious about gasket mount boards. Also really liking the simple and clean case! Hope the price stays at your estimate, because that seems very doable ;)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 01:01:35
Super interested in this! I love the look of the 660 layout, and have been curious about gasket mount boards. Also really liking the simple and clean case! Hope the price stays at your estimate, because that seems very doable ;)
i will let IC running 2 weeks and make the final decision for the designs, after that send to factory do prototyping, confirm the color options at that time also. For price, try to control under that amount if possible:)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 01:03:17
good luck

gaskets are a ***** and a half
:thumb: i will try it :)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Mcnos on Thu, 18 October 2018, 01:04:03
Super interested in this! I love the look of the 660 layout, and have been curious about gasket mount boards. Also really liking the simple and clean case! Hope the price stays at your estimate, because that seems very doable ;)
i will left IC running 2 weeks and make the final decision for the designs, after that send to factory do prototyping, confirm the color options at that time also. For price, try to control under that amount if possible:)

You know how long estimated when GB opens? When you receive prototype?
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 01:09:36
Super interested in this! I love the look of the 660 layout, and have been curious about gasket mount boards. Also really liking the simple and clean case! Hope the price stays at your estimate, because that seems very doable ;)
i will left IC running 2 weeks and make the final decision for the designs, after that send to factory do prototyping, confirm the color options at that time also. For price, try to control under that amount if possible:)

You know how long estimated when GB opens? When you receive prototype?
not sure....i will slow down and doing this one very carefully, probably running ic 2 weeks then i will make the final design, prototype it out and do some assembling video, typing test video and etc....
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: _ODIN_ on Thu, 18 October 2018, 01:16:58
Super interested in this! I love the look of the 660 layout, and have been curious about gasket mount boards. Also really liking the simple and clean case! Hope the price stays at your estimate, because that seems very doable ;)
i will left IC running 2 weeks and make the final decision for the designs, after that send to factory do prototyping, confirm the color options at that time also. For price, try to control under that amount if possible:)

You know how long estimated when GB opens? When you receive prototype?
not sure....i will slow down and doing this one very carefully, probably running ic 2 weeks then i will make the final design, prototype it out and do some assembling video, typing test video and etc....
Take your time to make this happen
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: V. Vega on Thu, 18 October 2018, 06:33:58
I'll be honest, I'm not really sure I understand what the gaskets do. But! I'm always up for trying new and different things. I also really like this aesthetically and that it's a 65-ish with a seemingly standard layout. I would get one!
Actually this mounting system can produce a better bottom sound when you typing, the rubber between plate and case will remove or reduce the unwanted vibrations. Instead of using TOP/Bottom mounting, I believed that this gasket mount can add a compression force on plate when we tight the screws. When user typing on the keyboard, the force will be decomposed to thousands of contact points on rubber stripe(instead of 6-8 screws point for top/bottom mounting system). Itís a tricky problem but I will try my best to make it happens.
Thank you for taking the time to help me understand! I had a couple of users explain it to me in discord and putting their information with yours has helped, I think I get it and it seems really interesting to me!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 07:23:36
Interesting,

What are the heights of front and rear?
front 2cm, rear 3.3cm
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: regionfree on Thu, 18 October 2018, 07:40:03
definitely IN!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 08:05:51
definitely IN!
thanks my brother:)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Mearaz on Thu, 18 October 2018, 08:13:25
Nice! gotta support my fellow Singaporean.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 10:33:16
Find some good explanations about gasket mounting system and i did it in same way for Volcano660 version. Hope it can help you guys.

op link as reference: https://brianleereviews.wordpress.com/2018/08/01/release-notes-keycult-no-1-2018s-board-of-the-year/
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: jumpmineralwater on Thu, 18 October 2018, 11:59:45
Interested :thumb: and hope there will be an exterior weight.

Looking forward to the GB
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: merlin64 on Thu, 18 October 2018, 13:13:12
@ilouis_07, do you know if this will support clueboard pcb or the original fc660m pcb?
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: KaosJ on Thu, 18 October 2018, 14:09:42
Interested :thumb: and hope there will be an exterior weight.

Looking forward to the GB

Me too, exterior weight!!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: lazyfart on Thu, 18 October 2018, 14:30:20
Love the shallow slope shown in the SA render! I think that will be more comfortable to type on as opposed to the stiff linear slop of the cherry render. Can't wait!

Sent from my SM-N920I using Tapatalk
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: gigag33k on Thu, 18 October 2018, 16:14:06
Using my first post to say Iím very interested.

Iím also curious about what someone else asked... will there be compatibility with the clueboard or fc660 pcbís?

Thanks and keep up the good work


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 19:43:45
@ilouis_07, do you know if this will support clueboard pcb or the original fc660m pcb?
Yes it will fit.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 19:45:09
Interested :thumb: and hope there will be an exterior weight.

Looking forward to the GB
Yes Iím working on it right now.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 19:45:48
Interested :thumb: and hope there will be an exterior weight.

Looking forward to the GB

Me too, exterior weight!!
Sure thing :)
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: ilouis_07 on Thu, 18 October 2018, 19:49:43
Using my first post to say Iím very interested.

Iím also curious about what someone else asked... will there be compatibility with the clueboard or fc660 pcbís?

Thanks and keep up the good work


Sent from my iPhone using Tapatalk
Yes, I used same dimensions as original FC660m does, so clueboard 660 will be np imo. Also it is good to have another existing PCB solution what if the default PCB broken after many years.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: upas on Thu, 18 October 2018, 23:17:02
This is really intriguing! Will the PCB support QMK?

Shouldn't be as necessary for a 660 format board but would be nice.
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: moitorpsychoo on Fri, 19 October 2018, 01:47:50
very nice design, in for 1!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: Geckt on Fri, 19 October 2018, 02:53:46
@ilouis_07 that's a really cool picture to show how the mounting works!
Title: Re: [IC]Volcano660, bring the gasket mount back
Post by: krey on Fri, 19 October 2018, 07:05:02
my wallet will be ready.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Redesigned Weight)
Post by: ilouis_07 on Tue, 23 October 2018, 02:18:28
redesigned weight to exterior and new IC form will coming soon.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Redesigned Weight)
Post by: Mcnos on Tue, 23 October 2018, 02:20:42
redesigned weight to exterior and new IC form will coming soon.

 :eek: :eek: :eek: :eek: :eek: :eek: :eek:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Redesigned Weight)
Post by: tunadesu on Tue, 23 October 2018, 19:07:35
Loving this, man. Not sure if I'm the odd man out, but hoping that the typing angle can be slightly raised to 7 degrees  :cool:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Redesigned Weight)
Post by: dc_in_sf on Wed, 24 October 2018, 13:15:38
If it supports the clueboard pcb I'll likely be in. I am heavily invested in QMK :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Redesigned Weight)
Post by: ilouis_07 on Wed, 24 October 2018, 13:20:23
If it supports the clueboard pcb I'll likely be in. I am heavily invested in QMK :)
i already asked clueboard for the PCB dimension, definitely will fit their pcb if they provided info. Also i can do QMK pcb as well.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Redesigned Weight)
Post by: ilouis_07 on Wed, 24 October 2018, 15:27:43
Hi friends, my latest drawing is right here:) hope you guys like that :DDD
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: edasaur on Wed, 24 October 2018, 16:02:51
Hi friends, my latest drawing is right here:) hope you guys like that :DDD
Reminds me of toblerone :)

Sent from my Pixel 2 XL using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: _ODIN_ on Thu, 25 October 2018, 02:06:59
Amazing
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: wongie on Thu, 25 October 2018, 07:39:50
Reminds me of toblerone :)


Maybe OP can rename this board to Toblerone660.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ilouis_07 on Thu, 25 October 2018, 08:10:25
Hi friends, my latest drawing is right here:) hope you guys like that :DDD
Reminds me of toblerone :)

Sent from my Pixel 2 XL using Tapatalk
lol, or chocolate 660 if it is in dark brown chocolate color anodizing.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ilouis_07 on Thu, 25 October 2018, 11:12:49
(https://uploads.tapatalk-cdn.com/20181025/7da11b3952a5cf88532d0f76bdd58e9c.jpg)
(https://uploads.tapatalk-cdn.com/20181025/71b0a355e6b1333e0a49dc133cdb60c8.jpg)
(https://uploads.tapatalk-cdn.com/20181025/fbeb15909f4cc99c5a152d94a466d5f3.jpg)
Some updates done by today, will modify OP and explain details when Iím free.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: Danissl on Sat, 27 October 2018, 09:43:03
I just wanted to post my support here, and say i am excited for the GB! And itll be my first, to boot!

So long as you have the alps pcb 😉😉
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: KaosJ on Sat, 27 October 2018, 12:42:32
Show Image
(https://uploads.tapatalk-cdn.com/20181025/7da11b3952a5cf88532d0f76bdd58e9c.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/71b0a355e6b1333e0a49dc133cdb60c8.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/fbeb15909f4cc99c5a152d94a466d5f3.jpg)

Some updates done by today, will modify OP and explain details when Iím free.


wait are these screws between 60% module and the 2 keys on the right? E.g. we can see screws from the top?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: PoochZag on Sat, 27 October 2018, 12:57:49
Show Image
(https://uploads.tapatalk-cdn.com/20181025/7da11b3952a5cf88532d0f76bdd58e9c.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/71b0a355e6b1333e0a49dc133cdb60c8.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/fbeb15909f4cc99c5a152d94a466d5f3.jpg)

Some updates done by today, will modify OP and explain details when Iím free.


wait are these screws between 60% module and the 2 keys on the right? E.g. we can see screws from the top?

I think those are LED indicators for the lock lights (caps lock, scroll lock, etc)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ilouis_07 on Sat, 27 October 2018, 13:00:38
Show Image
(https://uploads.tapatalk-cdn.com/20181025/7da11b3952a5cf88532d0f76bdd58e9c.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/71b0a355e6b1333e0a49dc133cdb60c8.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/fbeb15909f4cc99c5a152d94a466d5f3.jpg)

Some updates done by today, will modify OP and explain details when Iím free.


wait are these screws between 60% module and the 2 keys on the right? E.g. we can see screws from the top?
Those are led indicators.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: Dovan1405 on Sat, 27 October 2018, 15:15:29
any thoughts of having a polycarb version of this? and also options of other materials for the plate like copper, stainless steel and so on.... :D
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: KaosJ on Sat, 27 October 2018, 15:19:01
Show Image
(https://uploads.tapatalk-cdn.com/20181025/7da11b3952a5cf88532d0f76bdd58e9c.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/71b0a355e6b1333e0a49dc133cdb60c8.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/fbeb15909f4cc99c5a152d94a466d5f3.jpg)

Some updates done by today, will modify OP and explain details when Iím free.


wait are these screws between 60% module and the 2 keys on the right? E.g. we can see screws from the top?
Those are led indicators.

Ah nice, the render gif on instagram confused me :D
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ilouis_07 on Sat, 27 October 2018, 15:22:48
Show Image
(https://uploads.tapatalk-cdn.com/20181025/7da11b3952a5cf88532d0f76bdd58e9c.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/71b0a355e6b1333e0a49dc133cdb60c8.jpg)

Show Image
(https://uploads.tapatalk-cdn.com/20181025/fbeb15909f4cc99c5a152d94a466d5f3.jpg)

Some updates done by today, will modify OP and explain details when Iím free.


wait are these screws between 60% module and the 2 keys on the right? E.g. we can see screws from the top?
Those are led indicators.

Ah nice, the render gif on instagram confused me :D
Oh haha sorry about that , whole keyboard only have 8 screws from btm case to top case.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ilouis_07 on Sat, 27 October 2018, 15:26:45
any thoughts of having a polycarb version of this? and also options of other materials for the plate like copper, stainless steel and so on.... :D
Plate default will be brass. Stainless steel maybe cannot.
Polycarbonate body will be cool options ,how about raffles them?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: KaosJ on Sat, 27 October 2018, 15:31:18
Wait why it is curved?

(https://i.imgur.com/8D4C9sP.png)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: Allo on Sat, 27 October 2018, 15:48:38
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)


Yeah, I don't like the curved look.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: _ODIN_ on Sat, 27 October 2018, 16:25:14
I would love to see a  copper plate

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ilouis_07 on Sun, 28 October 2018, 00:46:32
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: Dovan1405 on Sun, 28 October 2018, 01:05:40
any thoughts of having a polycarb version of this? and also options of other materials for the plate like copper, stainless steel and so on.... :D
Plate default will be brass. Stainless steel maybe cannot.
Polycarbonate body will be cool options ,how about raffles them?


Yes please polycarb body with pc/ copper plate :D


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: longsock on Sun, 28 October 2018, 07:30:54
looks good! other than the curved profile :)

Sent from my SM-G965F using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ptiede on Sun, 28 October 2018, 09:41:05
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.
Personally I am a fan of the curve. It gives the board a bit of a unique flair.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: Funktion on Sun, 28 October 2018, 10:01:24
Yeah the curve is kinda odd to me. Still really like the concept for the board. If it remains this subtle than I may get over it but I do prefer the straight edge.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!)
Post by: _ODIN_ on Sun, 28 October 2018, 10:20:34
I prefer the straight line

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!)
Post by: ilouis_07 on Sun, 28 October 2018, 10:27:53
i don't want to make universal iso/ansi enter key plate, so i have done 2 versions.
Last row will be universal for different layout.
Lshift can be:2.25 or 1.25+1 or 1+1.25
Rshift can be: 2.25 or 1.25+1 or 1+1.25 as well. 

for alps plate, i am still doing now, will have as well. PCB will support alps also.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!)
Post by: _ODIN_ on Sun, 28 October 2018, 10:52:07
The plates look good but can you remove the ansi enter cutout from the ISO plate?
i don't want to make universal iso/ansi enter key plate, so i have done 2 versions.
Last row will be universal for different layout.
Lshift can be:2.25 or 1.25+1 or 1+1.25
Rshift can be: 2.25 or 1.25+1 or 1+1.25 as well. 

for alps plate, i am still doing now, will have as well. PCB will support alps also.

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!)
Post by: ilouis_07 on Sun, 28 October 2018, 10:54:53
The plates look good but can you remove the ansi enter cutout from the ISO plate?
i don't want to make universal iso/ansi enter key plate, so i have done 2 versions.
Last row will be universal for different layout.
Lshift can be:2.25 or 1.25+1 or 1+1.25
Rshift can be: 2.25 or 1.25+1 or 1+1.25 as well. 

for alps plate, i am still doing now, will have as well. PCB will support alps also.

Gesendet von meinem H8416 mit Tapatalk
oops i updated wrong pic for iso.....
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!)
Post by: ilouis_07 on Sun, 28 October 2018, 11:24:54
The plates look good but can you remove the ansi enter cutout from the ISO plate?
i don't want to make universal iso/ansi enter key plate, so i have done 2 versions.
Last row will be universal for different layout.
Lshift can be:2.25 or 1.25+1 or 1+1.25
Rshift can be: 2.25 or 1.25+1 or 1+1.25 as well. 

for alps plate, i am still doing now, will have as well. PCB will support alps also.

Gesendet von meinem H8416 mit Tapatalk
fixed.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!)
Post by: _ODIN_ on Sun, 28 October 2018, 11:38:06
The plates look good but can you remove the ansi enter cutout from the ISO plate?
i don't want to make universal iso/ansi enter key plate, so i have done 2 versions.
Last row will be universal for different layout.
Lshift can be:2.25 or 1.25+1 or 1+1.25
Rshift can be: 2.25 or 1.25+1 or 1+1.25 as well. 

for alps plate, i am still doing now, will have as well. PCB will support alps also.

Gesendet von meinem H8416 mit Tapatalk
fixed.


Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: sJ1N on Sun, 28 October 2018, 11:40:31
interested :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: ilouis_07 on Sun, 28 October 2018, 11:41:57
Here is a short IC form for you:

https://goo.gl/forms/FCM1S8zj8sIvHtne2
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: _ODIN_ on Sun, 28 October 2018, 12:04:07
Here is a short IC form for you:

https://goo.gl/forms/FCM1S8zj8sIvHtne2
how expensive will the full brass option be?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: Mcnos on Sun, 28 October 2018, 12:06:18
Here is a short IC form for you:

https://goo.gl/forms/FCM1S8zj8sIvHtne2
how expensive will the full brass option be?

First born child and 1 million Zimbabwe dollars
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: _ODIN_ on Sun, 28 October 2018, 12:07:10
Seems reasonable
Here is a short IC form for you:

https://goo.gl/forms/FCM1S8zj8sIvHtne2
how expensive will the full brass option be?

First born child and 1 million Zimbabwe dollars

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: Starston3 on Sun, 28 October 2018, 13:51:31
Like the fixed layout and weight.

I'm in.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: KaosJ on Sun, 28 October 2018, 17:29:01
Here is a short IC form for you:

https://goo.gl/forms/FCM1S8zj8sIvHtne2
how expensive will the full brass option be?

Don't need to know, just open your heart (and your wallet) and pick that full brass option  ;)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: Dovan1405 on Mon, 29 October 2018, 08:29:54
Here is a short IC form for you:

https://goo.gl/forms/FCM1S8zj8sIvHtne2

In for poly carb


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Design Updated in!!!!28th/Oct)
Post by: kakan on Mon, 29 October 2018, 08:30:59
Here is a short IC form for you:

https://goo.gl/forms/FCM1S8zj8sIvHtne2

In for poly carb


Sent from my iPhone using Tapatalk

I'm too, sadly it seems like he will only raffle them away  :(
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Render is updated in!!!1st/Nov)
Post by: ilouis_07 on Wed, 31 October 2018, 22:50:57
so far has 68 responses. 30% want to have fully brass build raffles and 40% want the PC version.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Render is updated in!!!1st/Nov)
Post by: Mcnos on Wed, 31 October 2018, 23:36:06
so far has 68 responses. 30% want to have fully brass build raffles and 40% want the PC version.

I think PC is the way to go. Brass just tarnishes easily and I don't see the point of having an all brass board, but that is just only my opinion. People may like it, but I love me some 66
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Render is updated in!!!1st/Nov)
Post by: KaosJ on Thu, 01 November 2018, 04:53:10
so far has 68 responses. 30% want to have fully brass build raffles and 40% want the PC version.

I think PC is the way to go. Brass just tarnishes easily and I don't see the point of having an all brass board, but that is just only my opinion. People may like it, but I love me some 66

Not sure if the IC form was abused initially or something but is really strange that PC has a 40% (unexpected i would say).
To be honest, if that's the only option, i pass. Not going to spend more than alu for "deluxe plastic".

Regarding your concern, full brass should be also PVD and also any brass would be covered to prevent oxidation.

Hopefully, there will be multiple optiona to make the top choices happy with it.

Title: [IC]Volcano660, Gasket Mount Keyboard(Render is updated in!!!1st/Nov)
Post by: Dovan1405 on Thu, 01 November 2018, 11:00:42
so far has 68 responses. 30% want to have fully brass build raffles and 40% want the PC version.

I think PC is the way to go. Brass just tarnishes easily and I don't see the point of having an all brass board, but that is just only my opinion. People may like it, but I love me some 66

Not sure if the IC form was abused initially or something but is really strange that PC has a 40% (unexpected i would say).
To be honest, if that's the only option, i pass. Not going to spend more than alu for "deluxe plastic".

Regarding your concern, full brass should be also PVD and also any brass would be covered to prevent oxidation.

Hopefully, there will be multiple optiona to make the top choices happy with it.


Nothing unexpected about it. Polycarb boards are pretty hyped now a days.

Also having multiple options will be difficult with pricing and stuff. But we can also see what louis will open for us. The more the merrier of course.


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Render is updated in!!!1st/Nov)
Post by: taropaste on Thu, 01 November 2018, 12:51:22
any thoughts of having a polycarb version of this? and also options of other materials for the plate like copper, stainless steel and so on.... :D
Plate default will be brass. Stainless steel maybe cannot.
Polycarbonate body will be cool options ,how about raffles them?

so far has 68 responses. 30% want to have fully brass build raffles and 40% want the PC version.

I think PC is the way to go. Brass just tarnishes easily and I don't see the point of having an all brass board, but that is just only my opinion. People may like it, but I love me some 66

Not sure if the IC form was abused initially or something but is really strange that PC has a 40% (unexpected i would say).
To be honest, if that's the only option, i pass. Not going to spend more than alu for "deluxe plastic".

Regarding your concern, full brass should be also PVD and also any brass would be covered to prevent oxidation.

Hopefully, there will be multiple optiona to make the top choices happy with it.



@KaosJ, based on what Louis said (I quoted above) and what was on the google form, I'm pretty sure he was just exploring what people might want for a special limited number of boards which he would raffle off (poly or full brass). The main group buy would be normal aluminum versions. I'm sure he'll clarify but I don't think there's any reason for concern :).

Also, I'm hyped for the potential of a poly version!!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Render is updated in!!!1st/Nov)
Post by: ilouis_07 on Thu, 01 November 2018, 21:37:02
any thoughts of having a polycarb version of this? and also options of other materials for the plate like copper, stainless steel and so on.... :D
Plate default will be brass. Stainless steel maybe cannot.
Polycarbonate body will be cool options ,how about raffles them?

so far has 68 responses. 30% want to have fully brass build raffles and 40% want the PC version.

I think PC is the way to go. Brass just tarnishes easily and I don't see the point of having an all brass board, but that is just only my opinion. People may like it, but I love me some 66

Not sure if the IC form was abused initially or something but is really strange that PC has a 40% (unexpected i would say).
To be honest, if that's the only option, i pass. Not going to spend more than alu for "deluxe plastic".

Regarding your concern, full brass should be also PVD and also any brass would be covered to prevent oxidation.

Hopefully, there will be multiple optiona to make the top choices happy with it.



@KaosJ, based on what Louis said (I quoted above) and what was on the google form, I'm pretty sure he was just exploring what people might want for a special limited number of boards which he would raffle off (poly or full brass). The main group buy would be normal aluminum versions. I'm sure he'll clarify but I don't think there's any reason for concern :).

Also, I'm hyped for the potential of a poly version!!
thanks for the answer @taropaste. YES, the main gb version will be:alum top and bottom case, Brass plate and weight. In IC form, raffles sale for PC or full brass version, i will do limited kits for raffles only.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Render is updated in!!!1st/Nov)
Post by: ilouis_07 on Thu, 01 November 2018, 21:43:27
I changed USB port to Type C, i think type C is the future :D maybe.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Dovan1405 on Fri, 02 November 2018, 00:46:38
I changed USB port to Type C, i think type C is the future :D maybe.
Time for a new cable then


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Fri, 02 November 2018, 03:29:37
I changed USB port to Type C, i think type C is the future :D maybe.
Time for a new cable then


Sent from my iPhone using Tapatalk
correct me if i am wrong. I tot, type c can allow more current flow in to the circuit, but pcb doesn't have rgb underglow. Type C consider more secure and it is reversible(user friendly:P).
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: _ODIN_ on Fri, 02 November 2018, 03:41:39
Did you consider the copper plate?

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: slxdegrees on Fri, 02 November 2018, 03:48:49
Just curious, will there be an option to customise the design on the weight?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Fri, 02 November 2018, 04:19:09
Just curious, will there be an option to customise the design on the weight?
you meant engraving some words on it?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: The Raygin Asian on Fri, 02 November 2018, 13:11:11
Filled out the IC! How long until the GB do you think? If it's a month out I'm definitely in.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Fri, 02 November 2018, 22:54:10
Filled out the IC! How long until the GB do you think? If it's a month out I'm definitely in.
GB SHOULD be next month. i can't confirm yet, i am still looking for prototyping factory now.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: slxdegrees on Sat, 03 November 2018, 03:02:17
Just curious, will there be an option to customise the design on the weight?
you meant engraving some words on it?

Yes, like what Gray Studio had for the COD67 (https://en.zfrontier.com/products/cod67csec).
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sat, 03 November 2018, 04:02:11
Just curious, will there be an option to customise the design on the weight?
you meant engraving some words on it?

Yes, like what Gray Studio had for the COD67 (https://en.zfrontier.com/products/cod67csec).
i have been thinking about it also. But so far i haven't decided prototyping factory yet. Need more time to answer this Question but i will try for sure:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sun, 04 November 2018, 06:37:01
update: Type C for PCB.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: bobdenard on Sun, 04 November 2018, 07:14:43
Is Bluetooth still a possibility? Was really looking forward to it.


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: pino38 on Sun, 04 November 2018, 07:23:52
price est on the full brass version?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sun, 04 November 2018, 07:29:09
Is Bluetooth still a possibility? Was really looking forward to it.


Sent from my iPhone using Tapatalk
sorry, no BT version PCB on this time.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sun, 04 November 2018, 07:30:27
price est on the full brass version?
Before the GB i will announce it, thanks:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: KaosJ on Sun, 04 November 2018, 07:42:40
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: pino38 on Sun, 04 November 2018, 07:52:25
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?
yay!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sun, 04 November 2018, 07:53:20
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?
nope, sorry
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Jedi on Sun, 04 November 2018, 10:28:20
I have to give you props man.  From a design perspective you've nailed most every aspect in designing this case, the plate, the weight, the profile, keycap setting, I am very interested in your review of the prototype.  Judging based on the number of views on this IC, you'll have no issue with selling.  Good luck on the prototype!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sun, 04 November 2018, 10:36:52
I have to give you props man.  From a design perspective you've nailed most every aspect in designing this case, the plate, the weight, the profile, keycap setting, I am very interested in your review of the prototype.  Judging based on the number of views on this IC, you'll have no issue with selling.  Good luck on the prototype!
Thanks:333
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Mcnos on Sun, 04 November 2018, 10:39:07
Will you be stocking extra pcbs?

Having the type c port on the case makes it proprietary to the certain pcb you're using as no others are using type c
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: V. Vega on Sun, 04 November 2018, 10:41:01
I'm really interested in this. I don't have anything in this layout and I'm super curious about gasket mount designs so I hope you're able to offer it in some nice fun pastel colors!
I'll be sad if it only comes in colors like black, red, and silver.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: KaosJ on Sun, 04 November 2018, 10:50:11
Will you be stocking extra pcbs?

Having the type c port on the case makes it proprietary to the certain pcb you're using as no others are using type c

To be honest there are other type-c 65%. 
Surely that's just a plus over the dinosaurs still using mini-usb in 2018 ;D
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: taropaste on Sun, 04 November 2018, 12:03:42
Will you be stocking extra pcbs?

Having the type c port on the case makes it proprietary to the certain pcb you're using as no others are using type c

To be honest there are other type-c 65%. 
Surely that's just a plus over the dinosaurs still using mini-usb in 2018 ;D

This isn't a 65% layout :rolleyes:. The only 66% pcb that is readily available is the clueboard and that does not use usb c. It looks like the new clueboard low profile pcb is usb c but that one is also hotswap. I don't know if skully plans on releasing a non-hotswap with usb c anytime. Louis, I would honestly prefer the volcano remain compatible with the clueboard pcb. I don't have the most confidence in Percent's pcbs after what happened with the Canoe. I know there are some others who feel the same way but I don't know if that is the a lot of people. Maybe do another google form for usb c vs clueboard pcb compatibility? Lol.

I don't know ...obviously it's your decision. I'm just offering my opinion. By the way, thank you for being so responsive with your IC. You're doing a great job :thumb:.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: KaosJ on Sun, 04 November 2018, 17:52:49
Will you be stocking extra pcbs?

Having the type c port on the case makes it proprietary to the certain pcb you're using as no others are using type c

To be honest there are other type-c 65%. 
Surely that's just a plus over the dinosaurs still using mini-usb in 2018 ;D

This isn't a 65% layout :rolleyes:. The only 66% pcb that is readily available is the clueboard and that does not use usb c. It looks like the new clueboard low profile pcb is usb c but that one is also hotswap. I don't know if skully plans on releasing a non-hotswap with usb c anytime. Louis, I would honestly prefer the volcano remain compatible with the clueboard pcb. I don't have the most confidence in Percent's pcbs after what happened with the Canoe. I know there are some others who feel the same way but I don't know if that is the a lot of people. Maybe do another google form for usb c vs clueboard pcb compatibility? Lol.

I don't know ...obviously it's your decision. I'm just offering my opinion. By the way, thank you for being so responsive with your IC. You're doing a great job :thumb:.

IKR i think answering this while watching the Space65 mixed my thoughts :D

I agree about the percent part. I doubt it will happen again but why taking the risk. Better avoid unless we are talking about that sweet clear pcb, in that case i would take the risk. 

The only thing that is on priority to me regarding the pcb is TYPE-C and QMK. Nothing else. I wouldn't buy any bootmapper pcb, probably same logic for the connector unless the design is really outstanding and blowing my mind. 
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: regionfree on Sun, 04 November 2018, 18:37:23
I have the same opinion about Percent. The MAO Canoe I got had pcb issues (luckily I was able to fix it), and the quality of the finish is nothing compared to the China MAO version. I got the impression that they really donít care about quality for intíl buyers as we wonít be able to chase them for issues.

That said, Iím avoiding Percent products like the plague, and honestly, will be a dealbreaker for me if they would be the pcb provider.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sun, 04 November 2018, 20:02:37
Will you be stocking extra pcbs?

Having the type c port on the case makes it proprietary to the certain pcb you're using as no others are using type c
Definitely will. Currently i am working closely with clueboard skully on the PCB also. Both of us want to provide high end quality product:D
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Mon, 05 November 2018, 02:18:33
I have the same opinion about Percent. The MAO Canoe I got had pcb issues (luckily I was able to fix it), and the quality of the finish is nothing compared to the China MAO version. I got the impression that they really donít care about quality for intíl buyers as we wonít be able to chase them for issues.

That said, Iím avoiding Percent products like the plague, and honestly, will be a dealbreaker for me if they would be the pcb provider.
Actually they did all the free replacement when the pcb has problem (in new condition) in china domestic. But for international gb, i am not sure what is going on but sorry to heard that bro:(, PCB is the core for a keyboard and I'll give you a satisfactory answer in the end :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: missylo on Tue, 06 November 2018, 07:13:23
really stoked to see that your project has gone so far!! looking forward to it!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: TheMastermind on Tue, 06 November 2018, 22:07:23
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Abec13 on Wed, 07 November 2018, 08:03:05
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Funktion on Wed, 07 November 2018, 10:22:01
Liking this more and more as it has evolved. Tell me it won't be a limited run though. I don't want to fight for a spot of 1 of 50 or something like that.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Wed, 07 November 2018, 21:03:51
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Hi, it will be open slots for default kit(alum body+brass plate and brass weight) and raffles for PC/Fully brass kits.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Wed, 07 November 2018, 21:06:20
Liking this more and more as it has evolved. Tell me it won't be a limited run though. I don't want to fight for a spot of 1 of 50 or something like that.
Haha, you don't need to fight, it is open slots for default kit.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: joe405 on Thu, 08 November 2018, 05:27:13
Will you be stocking extra pcbs?

Having the type c port on the case makes it proprietary to the certain pcb you're using as no others are using type c
Definitely will. Currently i am working closely with clueboard skully on the PCB also. Both of us want to provide high end quality product:D
Hmm in that case how about providing an option for the hotswap PCBs used for the clueboard LP? There's a split space version too.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: pino38 on Thu, 08 November 2018, 05:34:52
will the losers of the brass version raffle  have a window to still pick up an aluminum version?
I want to go all in on a brass, but if i donít get selected as a winner, i still want to be able to purchase an aluminum :D
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Geckt on Fri, 09 November 2018, 00:47:27
will the losers of the brass version raffle  have a window to still pick up an aluminum version?
I want to go all in on a brass, but if i donít get selected as a winner, i still want to be able to purchase an aluminum :D

Don't think you really need to worry about that.
I believed all these questions have been thought out before, he's very attentive to all these little details.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Eri Kasamoto on Fri, 09 November 2018, 10:43:48
I'm new and I'm in!

Really hoped that it would have came in a full brass option instead of having to go through a raffle.

Looking forward to the GB e-mail!😁
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Fri, 09 November 2018, 10:54:03
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Fri, 09 November 2018, 12:11:54
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
It must hit a minimum MoQ, and raffles for the limited quantity PC/Brass kits.
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk


Just watch the thread please, thank you very much. :) He will be releasing news frequently as soon as he gets new prototyping materials
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: KaosJ on Fri, 09 November 2018, 12:13:58
U L T R A V I O L E T
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: edasaur on Fri, 09 November 2018, 12:21:08
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
It will be a FCFS for the 50units till further stated by ilouis_07, and raffles for the limited quantity PC/Brass kits.
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk
What's a KOYU?

Sent from my G8142 using Tapatalk
https://rama.works/koyu/

I think

Sent from my Pixel 2 XL using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Starston3 on Fri, 09 November 2018, 12:23:37
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660
That Sailor Blue
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Fri, 09 November 2018, 18:51:35
@edasaur you're quoting an already edited and corrected reply, but, yes thank you for the link to KOYU.

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: edasaur on Fri, 09 November 2018, 18:53:10
@edasaur you're quoting an already edited and corrected reply, but, yes thank you for the link to KOYU.

Sent from my G8142 using Tapatalk
oops my bad. didn't see the update when I replied xD

Sent from my Pixel 2 XL using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: 8six753o9 on Fri, 09 November 2018, 18:57:28
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Awww no hot lava red?


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Fri, 09 November 2018, 19:08:27
@edasaur you're quoting an already edited and corrected reply, but, yes thank you for the link to KOYU.

Sent from my G8142 using Tapatalk
oops my bad. didn't see the update when I replied xD

Sent from my Pixel 2 XL using Tapatalk
Hey not a problem, **** happens. :X

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Fri, 09 November 2018, 19:09:42
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Awww no hot lava red?


Sent from my iPhone using Tapatalk
These are just tests, no confirmation on any colors yet. Chin up buddy!

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Eri Kasamoto on Sat, 10 November 2018, 20:24:05
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?

I will also say Yes! Hot swappability seems to be all the rage now, and for good reason.

But since OP doesn't agree, we probably won't be seeing it(at least in this version).

I guess there are many purists huh.😅
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: ilouis_07 on Sat, 10 November 2018, 22:37:56
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?

I will also say Yes! Hot swappability seems to be all the rage now, and for good reason.

But since OP doesn't agree, we probably won't be seeing it(at least in this version).

I guess there are many purists huh.😅
Hey, gasket mount a bit hard to do hot swap pcb imo.(unless i add some screws to fixed pcb on plate, maybe next time on other design i will try it:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Kasterborous on Sun, 11 November 2018, 03:50:16
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Those colors are freaking awesome :D

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: nulltorious on Sun, 11 November 2018, 04:06:12
Agreed. I hope the finalized option will include a red or rose gold color. I'm looking for something to put GMK Olivia on ;)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
Post by: Eri Kasamoto on Sun, 11 November 2018, 07:34:37
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?

I will also say Yes! Hot swappability seems to be all the rage now, and for good reason.

But since OP doesn't agree, we probably won't be seeing it(at least in this version).

I guess there are many purists huh.😅
Hey, gasket mount a bit hard to do hot swap pcb imo.(unless i add some screws to fixed pcb on plate, maybe next time on other design i will try it:)

Glad to hear that, means we will still be seeing some future iterations of the Volcano.😁

Also, saw the update regarding the cost. Hopefully the new PCB will not push the price point past the Koyu, as (IMHO) I felt that one of the main attractions of this keyboard was its relatively affordable price.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: missylo on Sun, 11 November 2018, 08:58:05
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Awww no hot lava red?


Sent from my iPhone using Tapatalk

Hahha like the pun there


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: missylo on Sun, 11 November 2018, 09:00:06
Gasket? Sounds interesting

there are a couple of links in the OP to more info about gaskets


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: lundmore on Sun, 11 November 2018, 17:11:35
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: TheMastermind on Mon, 12 November 2018, 01:52:25
Wait I'm confused, does this mean the "open slots" stated mean that they're only 50 boards going to be made or that 50 boards will need to be bought to start making the rest?
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
It will be a FCFS for the 50units till further stated by ilouis_07, and raffles for the limited quantity PC/Brass kits.
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk
What's a KOYU?

Sent from my G8142 using Tapatalk
https://rama.works/koyu/

I think

Sent from my Pixel 2 XL using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Tue, 13 November 2018, 07:03:25
Wait I'm confused, does this mean the "open slots" stated mean that they're only 50 boards going to be made or that 50 boards will need to be bought to start making the rest?
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
It will be a FCFS for the 50units till further stated by ilouis_07, and raffles for the limited quantity PC/Brass kits.
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk
What's a KOYU?

Sent from my G8142 using Tapatalk
https://rama.works/koyu/

I think

Sent from my Pixel 2 XL using Tapatalk
Actually to simplify things, it means there's a minimum MoQ to fulfill. Details will be clearer when the GB starts, the buy has yet to be give a launch date yet and the figures aren't confirmed. So sit tight. ;)

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: Eri Kasamoto on Tue, 13 November 2018, 07:36:42
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: lundmore on Tue, 13 November 2018, 15:41:44
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎

I totally agree. I think it will be more of a stand out if it had a subtle curve, too many keyboards are a basic wedge which isn't necessarily a bad thing but if he's dabbling with introducing a curve I say go for it!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: ilouis_07 on Wed, 14 November 2018, 02:46:32
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: longsock on Wed, 14 November 2018, 03:15:49
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: _ODIN_ on Wed, 14 November 2018, 03:58:38
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
it has to be very subtle imo
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: longsock on Wed, 14 November 2018, 04:39:12
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
it has to be very subtle imo

It is very subtle though, I'll attach a picture to show you - and if the V66 ends up having the same curve it wouldn't be any issues tbh.

(https://imgur.com/a/fUCive8)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
Post by: _ODIN_ on Wed, 14 November 2018, 04:45:16
Wait why it is curved?

Show Image
(https://i.imgur.com/8D4C9sP.png)

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
it has to be very subtle imo

It is very subtle though, I'll attach a picture to show you - and if the V66 ends up having the same curve it wouldn't be any issues tbh.

Show Image
(https://imgur.com/a/fUCive8)

:thumb:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Wed, 14 November 2018, 07:09:58
the radius of the curve will be 1150 mm. It is quite subtle imo:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: mikenogo on Wed, 14 November 2018, 13:00:15
Why no rose gold color? D:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: KaosJ on Wed, 14 November 2018, 13:09:40
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: V. Vega on Wed, 14 November 2018, 13:13:36
Why no rose gold color? D:
I was hoping for rose gold too, or a nice pastel purple.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: _ODIN_ on Wed, 14 November 2018, 13:23:29
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: The_judge_168 on Wed, 14 November 2018, 16:18:38
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk

Always intersted in green!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Mcnos on Wed, 14 November 2018, 18:25:51
I'm a simple person, gray.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Thu, 15 November 2018, 00:19:31
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk
Dark green is nice, will have!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: _ODIN_ on Thu, 15 November 2018, 00:25:50
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk
Dark green is nice, will have!
Amazing

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Thu, 15 November 2018, 00:29:15
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk
Dark green is nice, will have!
Amazing

Gesendet von meinem H8416 mit Tapatalk
Actually i submitted Pantone Black 3 C to factory and asked them to do a sample for me. imo, it is very dark greenish black.(or blackish green:P)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Thu, 15 November 2018, 03:21:07
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls
Roflmao... Hey.... We're not sure about that one since there is a color we're interested in trying and that is "Salmon Pink"

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Thu, 15 November 2018, 03:22:09
I'm a simple person, gray.
I liked your choice. Would be fantastic with the Artic or Hyperfuse set.

Sent from my G8142 using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: missylo on Thu, 15 November 2018, 09:42:43
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: missylo on Thu, 15 November 2018, 09:45:15
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls


booooo. What are you going on about? Girls rock. As for bearded girls - this is me!!!!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Eri Kasamoto on Fri, 16 November 2018, 01:44:44
the radius of the curve will be 1150 mm. It is quite subtle imo:)

Curve looks nice and gentle.😊

Good to have a confirmation that it will cover Cherry Profile.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Fri, 16 November 2018, 01:46:46
the radius of the curve will be 1150 mm. It is quite subtle imo:)

Curve looks nice and gentle.😊

Good to have a confirmation that it will cover Cherry Profile.
Yes, it will cover!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: TheMastermind on Fri, 16 November 2018, 07:40:01
I noticed in the pictures that the bottom row shows a 6u spacebar. Is this the final layout or will it support something more widespread like a 6.25u space?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: _ODIN_ on Fri, 16 November 2018, 08:58:19
I noticed in the pictures that the bottom row shows a 6u spacebar. Is this the final layout or will it support something more widespread like a 6.25u space?
Or even 7u

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Fri, 16 November 2018, 09:23:48
I noticed in the pictures that the bottom row shows a 6u spacebar. Is this the final layout or will it support something more widespread like a 6.25u space?
Hey! Since clueboard is my partner, so i just using clueboard 66% pcb to show all the compatible layouts.

(Reference Link:https://clueboard.co/parts/clueboard-66-pcb-25, and thanks skully for the great layouts provided)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Dovan1405 on Sat, 17 November 2018, 10:46:15
Me like gib gib


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: quinnx on Sat, 17 November 2018, 12:32:09
I was so dig clueboard design and capability. Love that they join v660!. I really want to buy my endgame keep now  :p
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: _ODIN_ on Sat, 17 November 2018, 12:49:11
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: TheMastermind on Sat, 17 November 2018, 13:21:47
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk
Good luck finding any 6u stabs unless you're willing to make one.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: _ODIN_ on Sat, 17 November 2018, 13:23:28
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk
Good luck finding any 6u stabs unless you're willing to make one.
Really? I thought the normal one would fit :-\
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: _ODIN_ on Sat, 17 November 2018, 18:27:50
I don't know if people are interested in it but a bronze/ copper color for the case would be amazing too.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Abec13 on Sun, 18 November 2018, 12:36:43
God I'm so excited for this guy. Heavy, 66%, Gasket mount... I just hope that since the PCB will be from clueboard, that getting extras won't be hard. USB-C or Mini, do you think?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Sun, 18 November 2018, 19:00:10
God I'm so excited for this guy. Heavy, 66%, Gasket mount... I just hope that since the PCB will be from clueboard, that getting extras won't be hard. USB-C or Mini, do you think?
USB C, this is customized version pcb done by clueboard. Because I have 3 LEDs here.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Sun, 18 November 2018, 19:01:42
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk
Yup thatís why I want to put this 6u spacebar here, also kbdfans has 6u wire, I will ask some for V66 GB.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: _ODIN_ on Mon, 19 November 2018, 01:53:12
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk
Yup thatís why I want to put this 6u spacebar here, also kbdfans has 6u wire, I will ask some for V66 GB.
Nice

Gesendet von meinem H8416 mit Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Tue, 20 November 2018, 06:39:08
Color sample plates will finish in 2 days. i am excited :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: otanishock on Tue, 20 November 2018, 08:15:41
Color sample plates will finish in 2 days. i am excited :)
Can't wait! Will be my first gasket mounts board. Can't wait to try out!!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Wed, 21 November 2018, 22:54:13
(https://uploads.tapatalk-cdn.com/20181122/989d9a3d8a259ea8630e4863487470bb.jpg)

Thatís sick !!!!!!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Windeh on Wed, 21 November 2018, 23:14:46
Oof and it begins!  :thumb:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: KaosJ on Thu, 22 November 2018, 16:49:14
Show Image
(https://uploads.tapatalk-cdn.com/20181122/989d9a3d8a259ea8630e4863487470bb.jpg)


Thatís sick !!!!!!

Yo that's a big boye :eye: 

Waiting for brass as well! 
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: missylo on Tue, 27 November 2018, 23:05:49
Show Image
(https://uploads.tapatalk-cdn.com/20181122/989d9a3d8a259ea8630e4863487470bb.jpg)


Thatís sick !!!!!!
Nice

Sent using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Geckt on Wed, 28 November 2018, 12:44:46
Show Image
(https://uploads.tapatalk-cdn.com/20181122/989d9a3d8a259ea8630e4863487470bb.jpg)


Thatís sick !!!!!!

This, looks like my bar of chocolate in aluminum foil.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Rubbermilitia on Wed, 28 November 2018, 13:16:03
Extremely excited for this. By far the best looking gasket mount system I've seen so far
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ninjacore on Wed, 28 November 2018, 22:38:56
Is gasket mount better for a particular switch style? I want to pickup either a top mount or gasket mount board, but I havenít owned either (only owned pcb-to-tray-mount boards so far). Iíll be building w zealios.

Win me over! ;)

Thanks
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Mcnos on Wed, 28 November 2018, 23:07:30
Is gasket mount better for a particular switch style? I want to pickup either a top mount or gasket mount board, but I havenít owned either (only owned pcb-to-tray-mount boards so far). Iíll be building w zealios.

Win me over! ;)

Thanks

I think the gasket stands out with linears, not sure about tactiles. Could have a great effect to it but I can't speak on gasket's behalf.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Rubbermilitia on Wed, 28 November 2018, 23:28:34
Is gasket mount better for a particular switch style? I want to pickup either a top mount or gasket mount board, but I havenít owned either (only owned pcb-to-tray-mount boards so far). Iíll be building w zealios.

Win me over! ;)

Thanks

I think the gasket stands out with linears, not sure about tactiles. Could have a great effect to it but I can't speak on gasket's behalf.

I would actually argue the opposite, conventional wisdom is that plates with more flex are better for tactile (like acrylic, fr4) while stiffer plates are better for linear (aluminum, brass, SS). This is because a bit of flex compliments the feeling of a tactile switch, whereas linears feel the most 'clean' when on a nice solid plate.

Since gasket mount introduces another level of flex/bounce (for lack of better words), conventional wisdom would probably side with tactiles working better on gasket mount.

But keep in mind that none of the above is universally relevant, and is always very subjective. For example, if you love to bottom out your switches, you don't want a SS plate because its way too rigid and will just hurt your fingers- therefore a bit of flex introduced by the gasket mounting could be welcome. But if you type lightly and never bottom out, you might want a more solid build.

And everything above this line is pretty much BS cause you like what you like. Try everything
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Starston3 on Wed, 28 November 2018, 23:31:16
Is gasket mount better for a particular switch style? I want to pickup either a top mount or gasket mount board, but I havenít owned either (only owned pcb-to-tray-mount boards so far). Iíll be building w zealios.

Win me over! ;)

Thanks

I think the gasket stands out with linears, not sure about tactiles. Could have a great effect to it but I can't speak on gasket's behalf.

I would actually argue the opposite, conventional wisdom is that plates with more flex are better for tactile (like acrylic, fr4) while stiffer plates are better for linear (aluminum, brass, SS). This is because a bit of flex compliments the feeling of a tactile switch, whereas linears feel the most 'clean' when on a nice solid plate.

Since gasket mount introduces another level of flex/bounce (for lack of better words), conventional wisdom would probably side with tactiles working better on gasket mount.

But keep in mind that none of the above is universally relevant, and is always very subjective. For example, if you love to bottom out your switches, you don't want a SS plate because its way too rigid and will just hurt your fingers- therefore a bit of flex introduced by the gasket mounting could be welcome. But if you type lightly and never bottom out, you might want a more solid build.

And everything above this line is pretty much BS cause you like what you like. Try everything



That last line pretty much sums it up. This entire hobby is about personal preference so everything is subjective.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: missylo on Wed, 28 November 2018, 23:40:09
...For example, if you love to bottom out your switches, you don't want a SS plate because its way too rigid and will just hurt your fingers- therefore a bit of flex introduced by the gasket mounting could be welcome. But if you type lightly and never bottom out, you might want a more solid build.

And everything above this line is pretty much BS cause you like what you like. Try everything

YASSSS!!! it is subjective.

i bottom out linear switches (light linears) and the brass doesn't feel so great for me
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Proer47 on Thu, 29 November 2018, 00:06:55
Count me in for 1!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: KaosJ on Thu, 29 November 2018, 01:29:55
There is just one acceptable material for plates for me: Brass.
THOCC THOCC THOCC
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Thu, 29 November 2018, 08:28:44
(https://uploads.tapatalk-cdn.com/20181129/03b5198e4cede83a45307195320c271f.jpg)

Still PVD? No way, this time is Chroming !


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ninjacore on Thu, 29 November 2018, 11:41:52
Thanks, everyone.  That's basically what I assumed.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: merlin64 on Thu, 29 November 2018, 13:54:16
oooooh soo shiny! I'm getting super excited about this.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: The_judge_168 on Fri, 30 November 2018, 00:18:20
Show Image
(https://uploads.tapatalk-cdn.com/20181129/03b5198e4cede83a45307195320c271f.jpg)


Still PVD? No way, this time is Chroming !


从我的 iPhone 发送,使用 Tapatalk

Looks good. And yay ANSI only plate
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Puddsy on Fri, 30 November 2018, 00:22:16
Show Image
(https://uploads.tapatalk-cdn.com/20181129/03b5198e4cede83a45307195320c271f.jpg)


Still PVD? No way, this time is Chroming !


从我的 iPhone 发送,使用 Tapatalk

a beauty
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: KaosJ on Sat, 01 December 2018, 06:59:47
Show Image
(https://uploads.tapatalk-cdn.com/20181129/03b5198e4cede83a45307195320c271f.jpg)


Still PVD? No way, this time is Chroming !


从我的 iPhone 发送,使用 Tapatalk

a beauty

HOT AF
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: appaboy on Sat, 01 December 2018, 22:53:57
Joining this as soon as it happens.

ansi plate only? bummer
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Rubbermilitia on Sat, 01 December 2018, 23:48:36
Joining this as soon as it happens.

ansi plate only? bummer

5. support for ISO plate available
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: missylo on Sat, 01 December 2018, 23:50:09
Joining this as soon as it happens.

ansi plate only? bummer

5. support for ISO plate available


Sent using Tapatalk

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: KaosJ on Sun, 02 December 2018, 08:32:38
As long as other layouts are included in other plates and not in the standard one which i would like with only ANSI, It's ok
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: bluesclera on Sun, 02 December 2018, 12:49:31
I wish someone would make a ALPS pcb for this keyboard.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: lendflat on Sun, 02 December 2018, 14:09:58
Can it stick my Leopold fc660m pcb into this housing?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Sun, 02 December 2018, 18:49:38
I wish someone would make a ALPS pcb for this keyboard.
We did it, alps compatible


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: bluesclera on Sun, 02 December 2018, 18:53:01
whhhhhhhhhhhhhhhhat??? the pcb alps compatible? still need a different plate right? TELL ME MORE!!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Sun, 02 December 2018, 18:57:26
whhhhhhhhhhhhhhhhat??? the pcb alps compatible? still need a different plate right? TELL ME MORE!!
For pcb, Clueboard made this happened. Plate I will work on it.


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: bluesclera on Sun, 02 December 2018, 18:59:43
oh sweet..thank you, thank you, thank you.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Mon, 03 December 2018, 21:16:30
I just set up a server, for better communication and progress updates purpose, feels free to join:)

TianYue Lab Discord Link:

https://discord.gg/cdQfxt
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: Dolas on Wed, 05 December 2018, 12:06:59
discord invite expired.  can i get another?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: sJ1N on Wed, 05 December 2018, 15:06:27
Please also post any updates here, im eagerly waiting for this :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Wed, 05 December 2018, 18:46:51
Please also post any updates here, im eagerly waiting for this :)
:)
Prototype finished last week, waiting for pcb prototype from clueboard.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
Post by: ilouis_07 on Wed, 05 December 2018, 21:51:42
discord invite expired.  can i get another?
here we go, https://discord.gg/VMkbkS
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: tex_live_utility on Sat, 08 December 2018, 09:21:00
 It's still expired, you might need to change the invite settings to allow unlimited invites
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Sat, 08 December 2018, 09:22:53
It's still expired, you might need to change the invite settings to allow unlimited invites
here is a new link, feels free to join:)
https://discord.gg/AXC6VQ
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Abec13 on Sun, 09 December 2018, 14:58:03
Ugh I love this. It's like a Norbafoce but for a MX 66% which is the superior layout IMO. can't wait to pick one of these up. Just not sure on what color yet.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: FLawLesS on Sun, 09 December 2018, 17:30:15
I wonder how holy pandas or vintage blacks would sound in this case... I hate hallow cases, the design looks clean and well made might join. :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Sun, 09 December 2018, 21:35:36
updates: 10th Dec 2018

Clueboard have sent V66 pcb file to PCB factory in USA, so this PCB will be Made in USA.
est time end of Dec.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: travwal on Mon, 10 December 2018, 11:47:57
Is the white case color going to be possible that is shown in the renders? It's beautiful!
I have heard that a white finish is fairly tough to achieve.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Mon, 10 December 2018, 23:33:42
I wonder how holy pandas or vintage blacks would sound in this case... I hate hallow cases, the design looks clean and well made might join. :)
well, my design purpose for v66 is solid typing sound. I will do some typing sound videos after i received everything. probably gonna use lubed(krytox 105) retooled black.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Sharafaldin on Tue, 11 December 2018, 09:21:57
This is exactly what i've been looking for! Just at the right time too! Will you be selling these only as a GB or at later moments too? Just wondering if i can wait or if i should jump aboard immediately

Also, about that discord link  :D
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Tue, 11 December 2018, 19:13:37
This is exactly what i've been looking for! Just at the right time too! Will you be selling these only as a GB or at later moments too? Just wondering if i can wait or if i should jump aboard immediately

Also, about that discord link  :D
Only GB:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: FLawLesS on Wed, 12 December 2018, 04:43:47
I wonder how holy pandas or vintage blacks would sound in this case... I hate hallow cases, the design looks clean and well made might join. :)
well, my design purpose for v66 is solid typing sound. I will do some typing sound videos after i received everything. probably gonna use lubed(krytox 105) retooled black.

yes retooled black sounds like a good idea. I have of these as well let us know when you release sound samples :D


Skickat frŚn min iPhone med Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Thu, 13 December 2018, 21:17:36
(https://uploads.tapatalk-cdn.com/20181214/357a21ce5a16bbfd306a90b86130226c.jpg)

Thanks for my factory, this is the best Christmas gift ever:) Just on time !!!!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: yap68 on Thu, 13 December 2018, 21:51:23
Looks good. Interested in the coconut milk colour and hope the price doesn't go up anymore.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Fri, 14 December 2018, 07:40:32
OK, this discord link will not expire forever.

https://discord.gg/aBU3Zcy

welcome to the TYL Discord:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: constexpr on Mon, 17 December 2018, 00:16:55
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Mon, 17 December 2018, 01:53:04
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

Show Image
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)

Thanks buddy!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: KaosJ on Mon, 17 December 2018, 13:15:25
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

Show Image
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)

Thanks buddy!

there will be different plates? E.g. 1 standard ansi and one with all the supported layout/universal?
I kinda like when a plate is not a cheese plate
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Mon, 17 December 2018, 19:01:15
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

Show Image
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)

Thanks buddy!

there will be different plates? E.g. 1 standard ansi and one with all the supported layout/universal?
I kinda like when a plate is not a cheese plate
1) universal ansi compatible
2) universal iso compatible


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: KaosJ on Mon, 17 December 2018, 19:05:13
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

Show Image
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)

Thanks buddy!

there will be different plates? E.g. 1 standard ansi and one with all the supported layout/universal?
I kinda like when a plate is not a cheese plate
1) universal ansi compatible
2) universal iso compatible


从我的 iPhone 发送,使用 Tapatalk

Hey Louis, what you mean for universal ANSI? Ansi+all the layouts compatible?   
If so the only difference between the 2 is the enter and shift, wouldn't be better to make a total standard ANSI (so not even 1 extra hole, aka the perfect plate) + A full universal (including ISO and all the layouts). 
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Mon, 17 December 2018, 20:13:31
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

Show Image
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)

Thanks buddy!

there will be different plates? E.g. 1 standard ansi and one with all the supported layout/universal?
I kinda like when a plate is not a cheese plate
1) universal ansi compatible
2) universal iso compatible


从我的 iPhone 发送,使用 Tapatalk

Hey Louis, what you mean for universal ANSI? Ansi+all the layouts compatible?   
If so the only difference between the 2 is the enter and shift, wouldn't be better to make a total standard ANSI (so not even 1 extra hole, aka the perfect plate) + A full universal (including ISO and all the layouts).
Hi, you can refer to reply #89, i updated 2 layout pics.
of course more holes means more space for noise to travel, but this last row IMO looks ok:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: _ODIN_ on Tue, 18 December 2018, 01:37:57
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

Show Image
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)

Thanks buddy!

there will be different plates? E.g. 1 standard ansi and one with all the supported layout/universal?
I kinda like when a plate is not a cheese plate
1) universal ansi compatible
2) universal iso compatible


从我的 iPhone 发送,使用 Tapatalk

Hey Louis, what you mean for universal ANSI? Ansi+all the layouts compatible?   
If so the only difference between the 2 is the enter and shift, wouldn't be better to make a total standard ANSI (so not even 1 extra hole, aka the perfect plate) + A full universal (including ISO and all the layouts).
Hi, you can refer to reply #89, i updated 2 layout pics.
of course more holes means more space for noise to travel, but this last row IMO looks ok:)
The plates look good, I would keep it like that
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: KaosJ on Tue, 18 December 2018, 01:40:45
I made a KLE page for Volcano660 so it's easier to check which layouts it supports.

Long link: http://www.keyboard-layout-editor.com/#/gists/c9994772e680ab4d3f8a90cca30c8b2b
Short link: http://bit.ly/v660-layouts

Show Image
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)

Thanks buddy!

there will be different plates? E.g. 1 standard ansi and one with all the supported layout/universal?
I kinda like when a plate is not a cheese plate
1) universal ansi compatible
2) universal iso compatible


从我的 iPhone 发送,使用 Tapatalk

Hey Louis, what you mean for universal ANSI? Ansi+all the layouts compatible?   
If so the only difference between the 2 is the enter and shift, wouldn't be better to make a total standard ANSI (so not even 1 extra hole, aka the perfect plate) + A full universal (including ISO and all the layouts).
Hi, you can refer to reply #89, i updated 2 layout pics.
of course more holes means more space for noise to travel, but this last row IMO looks ok:)
The plates look good, I would keep it like that

I agree, definetely not a cheese plate :)
Thanks Louis, i remember these plates from that update but for a moment i thought you changed the files and made more holes. Glad you didn't, the current pates are perfect imho  :thumb:

Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: constexpr on Tue, 18 December 2018, 05:19:26
Plates are good as is, I agree.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: trg1234 on Sun, 23 December 2018, 21:06:03
When do you expect to get this gb running around?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Tue, 25 December 2018, 06:53:19
When do you expect to get this gb running around?
should be Jan or Feb
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: merlin64 on Wed, 26 December 2018, 10:30:28
When do you expect to get this gb running around?
should be Jan or Feb

Please wait till February so I can have money! =)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: KaosJ on Wed, 26 December 2018, 10:56:48
When do you expect to get this gb running around?
should be Jan or Feb

Please wait till February so I can have money! =)

But my body can't wait
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: trg1234 on Wed, 26 December 2018, 17:24:46
For the PCB is skully using the hotswap version or the solder?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Wed, 26 December 2018, 22:02:00
For the PCB is skully using the hotswap version or the solder?
solder version


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: V. Vega on Wed, 26 December 2018, 22:15:41
Are you going with the six colors mentioned earlier or are there different or additional colors? I'm dying for this in a light lavender or pale ice blue color.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Lisinge on Sun, 30 December 2018, 06:34:51
So looking forward to this board, a gold color would be sweet!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Rensuya on Mon, 31 December 2018, 00:30:29
I like how clean this looks for a 66%
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: TrotToHot on Mon, 31 December 2018, 02:01:52
Beautiful stuff. I love the isolated PgUp/Dn keys.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Abec13 on Mon, 31 December 2018, 02:22:16
Any chance of a silver one?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: hentaimen on Mon, 31 December 2018, 05:11:48
100% in
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Mon, 31 December 2018, 07:09:31
Talked with Clueboard today, prototype pcb may delay to 15th of Jan.
Let's wait 2 more weeks:)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Lisinge on Tue, 01 January 2019, 16:14:28
Dunno if this has been brought up already. But rubber tend to dry out. Or is that not a problem?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: lendflat on Tue, 01 January 2019, 16:22:43
The only thing keeping me from buying is the non-hot swap pcb, com'on....
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Starston3 on Tue, 01 January 2019, 16:28:02
The only thing keeping me from buying is the non-hot swap pcb, com'on....
Clueboard might stock a hotswap version of the pcb seeing as thatís what the LP uses.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Tue, 01 January 2019, 18:56:19
Dunno if this has been brought up already. But rubber tend to dry out. Or is that not a problem?
Rubber should be not a problem.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Tue, 01 January 2019, 18:59:38
The only thing keeping me from buying is the non-hot swap pcb, com'on....
Back to my design purpose, Iím aiming to improve the type feeling.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: lendflat on Tue, 01 January 2019, 19:03:16
The only thing keeping me from buying is the non-hot swap pcb, com'on....
Back to my design purpose, Iím aiming to improve the type feeling.

Hot swap pcb retards type feel? Do you have a link to that discussion?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: The_judge_168 on Tue, 01 January 2019, 21:39:27
In addition to feel, hot swap also means one fixed layout so I'd prefer non hot swap
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: ilouis_07 on Tue, 01 January 2019, 22:20:42
The only thing keeping me from buying is the non-hot swap pcb, com'on....
Back to my design purpose, Iím aiming to improve the type feeling.

Hot swap pcb retards type feel? Do you have a link to that discussion?
It is personal feeling, I tried some hot swap keyboards, not bad but canít compare to good assembled keyboard TBH.
Hot swap has advantages like: ez for user to assembled, ez to change the switch and etc.
Disadvantages: itís fixed layout, pcb need to be fixed and etc.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: thearctican on Tue, 01 January 2019, 23:14:10
The only thing keeping me from buying is the non-hot swap pcb, com'on....
Back to my design purpose, Iím aiming to improve the type feeling.

Hot swap pcb retards type feel? Do you have a link to that discussion?
It is personal feeling, I tried some hot swap keyboards, not bad but canít compare to good assembled keyboard TBH.
Hot swap has advantages like: ez for user to assembled, ez to change the switch and etc.
Disadvantages: itís fixed layout, pcb need to be fixed and etc.

Every kailh hotswap board I've built has had to be completely reworked. I prefer soldering, it's the same amount of work anyway since through-hole is easier to solder than surface.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: Marutks on Thu, 03 January 2019, 15:09:58
I am interested in gasket mount 'keeb' !   It would be great to have case without those three LEDs.   I think this case looks better without LEDs.

Is this high profile case?   I wonder whether switches are visible or not.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: thearctican on Fri, 04 January 2019, 09:59:49
I am interested in gasket mount 'keeb' !   It would be great to have case without those three LEDs.   I think this case looks better without LEDs.

Is this high profile case?   I wonder whether switches are visible or not.

It's high profile, have a look at the second pic in the original post.
I think the LEDs are nice, differentiates it from the Heavy-6 and original FC660M/C. Perhaps the placement could be different, but I'm not sure where else they would go (save for between the ins/delete cluster and the right arrow).
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype finished, waiting for PCB now)
Post by: chouyu on Sat, 05 January 2019, 10:01:03
 ;Dnice
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: ilouis_07 on Sat, 12 January 2019, 09:40:25
(https://uploads.tapatalk-cdn.com/20190112/5b60ee9907abf04b6531cfb4ea036826.jpg)
Arrived. For 66% size keyboard, this is really really heavy! The anodizing and cnc are absolutely top notch!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: merlin64 on Sun, 13 January 2019, 18:18:43
That is gorgeous. I think this is my endgame......for now.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: Rubbermilitia on Mon, 14 January 2019, 04:37:23
Show Image
(https://uploads.tapatalk-cdn.com/20190112/5b60ee9907abf04b6531cfb4ea036826.jpg)

Arrived. For 66% size keyboard, this is really really heavy! The anodizing and cnc are absolutely top notch!

Hype!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: TheMastermind on Tue, 15 January 2019, 06:16:53
Show Image
(https://uploads.tapatalk-cdn.com/20190112/5b60ee9907abf04b6531cfb4ea036826.jpg)

Arrived. For 66% size keyboard, this is really really heavy! The anodizing and cnc are absolutely top notch!
Do we know exactly how heavy? Looks absolutely gorgeous!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: otanishock on Fri, 18 January 2019, 06:44:07
Excitement intensifies....
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: Marutks on Fri, 18 January 2019, 11:39:42
looking forward to this board, I am interested in 6u spacebar
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: sJ1N on Mon, 21 January 2019, 10:20:29
im so excited for a typing video of this !
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: mrkantz on Mon, 21 January 2019, 11:28:42
Looks amazing! Definitely in.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: ilouis_07 on Mon, 21 January 2019, 18:43:57
Update: PCB shipped out from factory to Clueboard few days ago, skully will do some testing and ship to me after that.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: MTXjunkie on Mon, 21 January 2019, 21:27:21
Definitely canít wait to hear back. This board is high on my list of next purchases.


Sent from my iPhone using Tapatalk Pro
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: RSC on Wed, 13 February 2019, 15:45:48
Any updates?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: ilouis_07 on Wed, 13 February 2019, 19:20:00
Updates: I just come back from my holiday ytd. And Clueboard PCB has arrived, will assemble it before this weekend. (https://uploads.tapatalk-cdn.com/20190214/149db8ecffca2ed5de4212359b6c4db4.jpg)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(PCB Prototype is coming soon)
Post by: vikipedeer on Thu, 14 February 2019, 01:51:07
Updates: I just come back from my holiday ytd. And Clueboard PCB has arrived, will assemble it before this weekend.
Show Image
(https://uploads.tapatalk-cdn.com/20190214/149db8ecffca2ed5de4212359b6c4db4.jpg)

hypeeeeeee
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype Assemble in few days)
Post by: MrFurrior on Thu, 14 February 2019, 02:11:33
Really looking forward to this one, can't wait to see some more!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype Assemble in few days)
Post by: chuckdee on Thu, 14 February 2019, 10:51:42
Following this with interest!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype Assemble in few days)
Post by: ilouis_07 on Sat, 16 February 2019, 09:30:02
(https://uploads.tapatalk-cdn.com/20190216/4926069a096b99a9a855a2689ecd0aa0.jpg)(https://uploads.tapatalk-cdn.com/20190216/2d7c10f311f62ea354e5903ac9c45814.jpg)(https://uploads.tapatalk-cdn.com/20190216/ec990ce39a2e34899caeb9fb4f816619.jpg)(https://uploads.tapatalk-cdn.com/20190216/c4854c909eb76ab6a3a27ec184dcb38e.jpg)


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype Assemble in few days)
Post by: The_judge_168 on Sat, 16 February 2019, 19:30:38
Show Image
(https://uploads.tapatalk-cdn.com/20190216/4926069a096b99a9a855a2689ecd0aa0.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20190216/2d7c10f311f62ea354e5903ac9c45814.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20190216/ec990ce39a2e34899caeb9fb4f816619.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20190216/c4854c909eb76ab6a3a27ec184dcb38e.jpg)



从我的 iPhone 发送,使用 Tapatalk

Looking good! Excited for the buy!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype Assemble in few days)
Post by: TheMastermind on Sat, 16 February 2019, 19:43:13
Any news on the final colors being offered in the GB?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Prototype Assemble in few days)
Post by: Eri Kasamoto on Sun, 17 February 2019, 07:52:25
the radius of the curve will be 1150 mm. It is quite subtle imo:)

Show Image
(https://uploads.tapatalk-cdn.com/20190216/4926069a096b99a9a855a2689ecd0aa0.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20190216/2d7c10f311f62ea354e5903ac9c45814.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20190216/ec990ce39a2e34899caeb9fb4f816619.jpg)
Show Image
(https://uploads.tapatalk-cdn.com/20190216/c4854c909eb76ab6a3a27ec184dcb38e.jpg)



从我的 iPhone 发送,使用 Tapatalk


The sides of the keyboard no longer have the subtle curve?

Happy Chinese New Year by the way.😬
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: ilouis_07 on Sun, 17 February 2019, 10:38:35
hi guys here is the GMK keycap on Volcano660 Prototype typing sound :


feels free to check it out !
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: ilouis_07 on Sun, 17 February 2019, 10:40:10
And SA Keycap on Volcano660 typing sound :

t=17s

which one do you like more?:)))
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: mrpetrov on Sun, 17 February 2019, 13:05:55
I gotta say this keyboard sounds amazing. I didn't go in for the GB, but on sound alone I should have!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: V. Vega on Sun, 17 February 2019, 13:07:48
I gotta say this keyboard sounds amazing. I didn't go in for the GB, but on sound alone I should have!
Didn't happen yet ;)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: sJ1N on Sun, 17 February 2019, 13:15:44
sounds very nice, i prefer the gmk one personally :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: Zacharius on Mon, 18 February 2019, 12:34:22
Oh dang, this looks amazing! I'm definitely in for one whenever the GB happens.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: tpict on Wed, 20 February 2019, 10:45:51
can I ask how tall the front edge of the case is, or has that not been finalised yet?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: ilouis_07 on Thu, 28 February 2019, 21:22:57
Update*
The most exciting update for me and for all of our supporters, the final colors:

volcano grey
quantum blue
electronic white
carbon black
rose gold
wine red
forest green

Sample link:
https://imgur.com/a/Cz9WJ9r

PLS note that image and real color chips have the color difference, so I provide video for each color chip, it shows a different angle of the color chip. Hope it helps!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: pino38 on Thu, 28 February 2019, 21:28:26
that quantum blue is going to look amazing with GMK Bento


Sent from my iPhone using Tapatalk Pro
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: RamenTechMech on Thu, 28 February 2019, 21:31:20
that quantum blue is going to look amazing with GMK Bento


Sent from my iPhone using Tapatalk Pro

That is what I am thinking as well  :cool: :cool:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: nulltorious on Thu, 28 February 2019, 23:12:13
Wow fantastic anodization samples  :thumb:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: yap68 on Fri, 01 March 2019, 02:58:18
Is the Electronic White powder coated?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: TheMastermind on Fri, 01 March 2019, 03:04:43
All these colors look fantastic! It's going to be hard to pick just one.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: ilouis_07 on Fri, 01 March 2019, 03:05:33
Is the Electronic White powder coated?
Nope, it is electrophoresis white
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: osamine on Fri, 01 March 2019, 15:46:46
When will the group buy be available?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: sJ1N on Fri, 01 March 2019, 18:16:43
gyfs for samples  :thumb: :thumb:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: oldcat on Fri, 01 March 2019, 22:35:39
Is the Electronic White powder coated?
Nope, it is electrophoresis white

white made by alf?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: vicissitude on Fri, 01 March 2019, 22:57:13
Nice keyboard.  :thumb:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: ilouis_07 on Fri, 01 March 2019, 23:20:52
Is the Electronic White powder coated?
Nope, it is electrophoresis white

white made by alf?
Nope, other factory
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: ilouis_07 on Fri, 01 March 2019, 23:21:02
Nice keyboard.  :thumb:
Thanks


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: Jinnnxxu on Sat, 02 March 2019, 09:59:11
Nice gasket design, wanna innnnn!!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: oldcat on Sat, 02 March 2019, 11:24:30
Nice gasket design, wanna innnnn!!

Louis my man!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: urbantheii on Sat, 02 March 2019, 22:24:58
I can't wait, I am all in!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: G1LL3Y on Sun, 03 March 2019, 12:04:26
I just got an FC660C and I love the layout plus I am always looking for the best sound in a board. I think this gasket mount will be the interesting. Is there any chance for a more lava red. I would imagin a deeper almost dark/black red. What type of switches would you think would work best with a gasket mounted pcb?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: oldcat on Sun, 03 March 2019, 17:04:37
I just got an FC660C and I love the layout plus I am always looking for the best sound in a board. I think this gasket mount will be the interesting. Is there any chance for a more lava red. I would imagin a deeper almost dark/black red. What type of switches would you think would work best with a gasket mounted pcb?

The plate is still going to matter a lot for sound even with gasket. If you like high-pitched, brass is good, if you like more original switch sound, carbon fiber or pc is better.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: ninjacore on Sun, 03 March 2019, 17:21:05
I canít remember - is this going to support split backspace?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: G1LL3Y on Sun, 03 March 2019, 18:20:08
I canít remember - is this going to support split backspace?

According to the most recent layout earlier in the thread it appears this board will support split backspace.
(https://dl.dropboxusercontent.com/s/zpckv22zmba0h3s/Screenshot%202018-12-17%2007.16.06.png)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: ninjacore on Sun, 03 March 2019, 18:58:15
Thanks! You should put that in OP, OP :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: jortzii on Sun, 03 March 2019, 22:03:12
that quantum blue is going to look amazing with GMK Bento


Sent from my iPhone using Tapatalk Pro

If my plan wasn't to make this my Nautilus Nightmares board, blue or gray would be the choice. But that green is what I want, as it stands  :thumb:

Bento will look great on my Kira, and all of those gorgeous novelties will fit right in.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: oldcat on Sun, 03 March 2019, 22:26:02
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Final Color is Updated!)
Post by: tex_live_utility on Mon, 04 March 2019, 08:24:41
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
It just seems ideal to me for when you don't have an F row. Otherwise you need to put the `~ or |\ key somewhere strange.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: jortzii on Tue, 05 March 2019, 12:44:54
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
It just seems ideal to me for when you don't have an F row. Otherwise you need to put the `~ or |\ key somewhere strange.
Whatís the benefit of split backspace?


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: oldcat on Tue, 05 March 2019, 12:46:07
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
It just seems ideal to me for when you don't have an F row. Otherwise you need to put the `~ or |\ key somewhere strange.
Whatís the benefit of split backspace?

Sent from my iPhone using Tapatalk

You wil have 1 more key there, like the Truefox layout for whitefox
That said I am not used to that kind of layout at all haha.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: jortzii on Tue, 05 March 2019, 12:47:33
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
It just seems ideal to me for when you don't have an F row. Otherwise you need to put the `~ or |\ key somewhere strange.
Whatís the benefit of split backspace?

Sent from my iPhone using Tapatalk

You wil have 1 more key there, like the Truefox layout for whitefox
That said I am not used to that kind of layout at all haha.
Same haha. I feel like that change would really mess me up good at first. Could probably get used to it with time, but every other board I have owned was full backspace so it would be a struggle at first for sure


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: oldcat on Tue, 05 March 2019, 12:49:17
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
It just seems ideal to me for when you don't have an F row. Otherwise you need to put the `~ or |\ key somewhere strange.
Whatís the benefit of split backspace?

Sent from my iPhone using Tapatalk

You wil have 1 more key there, like the Truefox layout for whitefox
That said I am not used to that kind of layout at all haha.
Same haha. I feel like that change would really mess me up good at first. Could probably get used to it with time, but every other board I have owned was full backspace so it would be a struggle at first for sure


Sent from my iPhone using Tapatalk

Yeah, I think Truefox layout looks cool, if I got used to it first. But now I am stuck as all other boards are pretty much ANSI and I type really fast (will mess up fast too if layout changes).
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: jortzii on Tue, 05 March 2019, 12:50:45
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
It just seems ideal to me for when you don't have an F row. Otherwise you need to put the `~ or |\ key somewhere strange.
Whatís the benefit of split backspace?

Sent from my iPhone using Tapatalk

You wil have 1 more key there, like the Truefox layout for whitefox
That said I am not used to that kind of layout at all haha.
Same haha. I feel like that change would really mess me up good at first. Could probably get used to it with time, but every other board I have owned was full backspace so it would be a struggle at first for sure


Sent from my iPhone using Tapatalk

Yeah, I think Truefox layout looks cool, if I got used to it first. But now I am stuck as all other boards are pretty much ANSI and I type really fast (will mess up fast too if layout changes).
I type kinda weird so maybe it wouldnít be that bad, but Iím trying to get better at touch typing and split wouldnít help that much. It does look clean, though


Sent from my iPhone using Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: Bizpit on Tue, 05 March 2019, 17:47:33
What is the order limit for the group buy?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: ilouis_07 on Tue, 05 March 2019, 17:57:07
Update: GB thread has already submitted! GB time will be Sat 10pm SGT/ 9am EST


从我的 iPhone 发送,使用 Tapatalk
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: jobicoppola on Tue, 05 March 2019, 18:34:29
Update: GB thread has already submitted! GB time will be Sat 10pm SGT/ 9am EST

aw yeah!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: oldcat on Tue, 05 March 2019, 19:28:17
Update: GB thread has already submitted! GB time will be Sat 10pm SGT/ 9am EST


从我的 iPhone 发送,使用 Tapatalk

GLWS!
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: voxkey on Tue, 05 March 2019, 21:15:55
Maybe I should restart using split backspace, haha. Does look better than ANSI actually
It just seems ideal to me for when you don't have an F row. Otherwise you need to put the `~ or |\ key somewhere strange.
Whatís the benefit of split backspace?

Sent from my iPhone using Tapatalk

You wil have 1 more key there, like the Truefox layout for whitefox
That said I am not used to that kind of layout at all haha.
Same haha. I feel like that change would really mess me up good at first. Could probably get used to it with time, but every other board I have owned was full backspace so it would be a struggle at first for sure


Sent from my iPhone using Tapatalk

Yeah, I think Truefox layout looks cool, if I got used to it first. But now I am stuck as all other boards are pretty much ANSI and I type really fast (will mess up fast too if layout changes).

It'll mess you up for a day or so, but once you get used to not having to reach out for that backspace, it becomes so natural. I may be a bit biased as someone who uses `~ every day, all day, but I can't go back to standard ANSI anymore. It just seems inefficient.

On that note, you should do hotswap split-backspace on your new board with Millmax in that section :)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: child on Wed, 06 March 2019, 01:20:11

It'll mess you up for a day or so, but once you get used to not having to reach out for that backspace, it becomes so natural.

How does split backspace not require reaching out? Regular backspace is one row up, but a bit closer - if you draw a circle from homing key "J" it becomes clearly visible. Also regular backspace is easier to hit because it's bigger and located in the corner, so you don't have to be so precise.

I'm not bashing split backspace, but I fail to see the "obvious" benefits.

Quote
I may be a bit biased as someone who uses `~ every day, all day, but I can't go back to standard ANSI anymore. It just seems inefficient.


Yeah, usage pattern might play a big role here - I use `~ maybe once per day on the average, so I don't care about it being on another layer.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Typing Sound Video Uploaded.)
Post by: vegs on Wed, 06 March 2019, 02:01:26
can I ask how tall the front edge of the case is, or has that not been finalised yet?
I'm wondering about this as well. As much as I like gasket mount - I'm a bit worried about how tall the front looks.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: ninjacore on Wed, 06 March 2019, 10:54:24

It'll mess you up for a day or so, but once you get used to not having to reach out for that backspace, it becomes so natural.

How does split backspace not require reaching out? Regular backspace is one row up, but a bit closer - if you draw a circle from homing key "J" it becomes clearly visible. Also regular backspace is easier to hit because it's bigger and located in the corner, so you don't have to be so precise.

I'm not bashing split backspace, but I fail to see the "obvious" benefits.

Quote
I may be a bit biased as someone who uses `~ every day, all day, but I can't go back to standard ANSI anymore. It just seems inefficient.


Yeah, usage pattern might play a big role here - I use `~ maybe once per day on the average, so I don't care about it being on another layer.

I'm assuming @voxkey does the same, but personally, split backspace allows me to shift backspace DOWN one row (taking the place of "\|").  In place of what was once a 2U backspace key, I have "|\" and "Insert" (others do ~, etc..).

Completely concur with @voxkey's assessment, by the way.  Using normal ANSI backspace position feels very strange (more difficult) for me now and it didn't take longer than a day or two to get used to it being one row lower.

The only downside is that you _have_ to buy cap sets in the $100+ range if you want the correct legends (1.5U backspace, in particular).

If you have a programmable board, I'd encourage you to try it out.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(GB is coming in this week!)
Post by: voxkey on Sat, 16 March 2019, 13:53:12

It'll mess you up for a day or so, but once you get used to not having to reach out for that backspace, it becomes so natural.

How does split backspace not require reaching out? Regular backspace is one row up, but a bit closer - if you draw a circle from homing key "J" it becomes clearly visible. Also regular backspace is easier to hit because it's bigger and located in the corner, so you don't have to be so precise.

I'm not bashing split backspace, but I fail to see the "obvious" benefits.


Distance-wise, you are absolutely correct, but your hand still has to rotate to get up to that top row which is what makes it harder to reach.

I can also see a larger key being better for less precise typists.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)
Post by: CarlQs on Fri, 07 June 2019, 14:38:59
Are we stilllooking at a mid-June ship date?
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)
Post by: tyson522 on Tue, 17 September 2019, 13:44:07
This is going to look amazing with GMK Ashes on it. A perfect set for a perfect board. Volcanic Endgame
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)
Post by: biothermal on Tue, 17 September 2019, 13:47:23
This is going to look amazing with GMK Ashes on it. A perfect set for a perfect board. Volcanic Endgame

For real. That's a dream combo right there.
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)
Post by: tyson522 on Tue, 17 September 2019, 13:49:19
This is going to look amazing with GMK Ashes on it. A perfect set for a perfect board. Volcanic Endgame

For real. That's a dream combo right there.

I was lucky to find a Volcano in the wild today and will be buying it tomorrow. Now to figure out what color cerakote to put on it. :thinking:
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)
Post by: biothermal on Tue, 17 September 2019, 14:18:35
This is going to look amazing with GMK Ashes on it. A perfect set for a perfect board. Volcanic Endgame

For real. That's a dream combo right there.

I was lucky to find a Volcano in the wild today and will be buying it tomorrow. Now to figure out what color cerakote to put on it. :thinking:


Ooo I think I know which one you got, considering there aren't many out there yet. You could always cerakote it black to max out the greyscale constrast if you used it with your set  ;)
Title: Re: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)
Post by: LetoDaleko on Sat, 19 October 2019, 04:47:33
What was the aftermarket price, if I may ask?