Author Topic: [IC] Southpaw Full Size -- GB Live  (Read 20309 times)

0 Members and 1 Guest are viewing this topic.

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 5/29/18 w/ Proto)
« Reply #100 on: Mon, 04 June 2018, 06:51:28 »
Some more photos here below. It's being shipped here right now and should arrive by the end of the week so expect some proper photos sometime around then. I'll also be bringing it to the bay area keebs and coffee this Sunday if anyone wants to see it in person.







Offline JJ

  • Posts: 37
Re: [IC] Southpaw Full Size (Updated 5/29/18 w/ Proto)
« Reply #101 on: Thu, 07 June 2018, 04:59:03 »
this look really najs, dank board

Offline lumpofunworth

  • Posts: 38
  • Location: TX
  • Iím a guy, that does stuff, with things, for fun.
Re: [IC] Southpaw Full Size (Updated 5/29/18 w/ Proto)
« Reply #102 on: Thu, 07 June 2018, 08:29:44 »
Never tried a left handed numpad, but I like the idea! Looks great!
I like keyboards like I like people... I like keyboards a bit more come to think of it... nvm

Re: [IC] Southpaw Full Size (Updated 5/29/18 w/ Proto)
« Reply #103 on: Thu, 07 June 2018, 09:10:43 »
Iíve always had keyboards that were less than full size and just had a custom bump as on the left hand side. Now this is something I could get behind :)

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 5/29/18 w/ Proto)
« Reply #104 on: Sun, 10 June 2018, 23:22:58 »
Got the proto in on Friday but didn't have time to post pics. Brought it to the keebs and coffee today and it seemed pretty well received





Quality-wise, it's 99% there. The weight is a little bowed because of how I designed it so I'll be fixing that and doing a second proto. The other thing are the grain marks on the bottom side. After discussing things with the factory, they'll go ahead and chuck the ones that have that issue durring production.

-  The anodization is spot on. No dark spots or imperfections apart from the alu grain on the bottom.
-  The plate fits absolutely fantastic. Zero wobble or play in Gateron, Cherry MX, and Zealios. Minimal wiggle in Kailh speeds and boxes.
-  Seam between the top and bottom is nearly perfect. There is an inconsistency in the seam near where the alignment nubs are so I might get rid of those since it's whats causing the gap near the corners as the face is being machined with two tools with those there. 
-  Only issue now is the weight. I somehow managed to design an acute angle into the weight recess which didn't work out to well. Additionally, the weight bows slightly because of the length so I've done a small redesign and now it should fit perfectly. I also made the weight a little bigger so it weighs more. Should result in too much, if any, of a price increase.










Offline MegalaDump

  • Posts: 26
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #105 on: Mon, 11 June 2018, 01:40:29 »
Prototype looks absolutely stunning! Really excited for the group buy :thumb:
AL1 x2 | Southpaw extended 65 x2 | Southpaw Full Size x2 (when they ship) | TX-Cp x2 | Duck Jetfire | UK78 | Pearl 40 | TGR Alice | Doro67 (when it ships) | QXP (when it ships) | Singa Polycarb | ALF-x11 (when it ships)

Offline p_blaze

  • Posts: 437
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #106 on: Mon, 11 June 2018, 02:04:09 »
Looks amazing!
« Last Edit: Mon, 11 June 2018, 02:06:16 by p_blaze »

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #107 on: Tue, 12 June 2018, 01:24:11 »
Alright. Threw some switches and keycaps onto the plate to check fit and everything looks about right. Will adjust some tolerances in the second proto so there's less of a chance of things not working out. Looks pretty nice with the dolch set on there. Just wished that this thing already worked.






Offline portbaron

  • Posts: 287
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #108 on: Tue, 12 June 2018, 02:20:03 »
Well I'm in. The problem with full sized is the mouse is way off to the side. This pretty much solves that without losing the numpad or using nonstandard key sizes.
« Last Edit: Tue, 12 June 2018, 02:22:07 by portbaron »
  | LIVING THE 1800 LIFE |

Offline bmilcs

  • Posts: 669
  • Location: Western MA, USA
  • bryan | bmilcs
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #109 on: Tue, 12 June 2018, 09:35:50 »
Can I throw money at you yet?

Seriously, the design is even sexier in prototype form.
  
_ TOKYO60  #1
___ KBD75  #1 #2 #3 #4
____ ES87  #1 #2 #3 #4 #5
______ GB  SOUTHPAW.65 TGR.JANE.V2-#40

Offline MegalaDump

  • Posts: 26
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #110 on: Tue, 12 June 2018, 16:50:20 »
Went from wanting this to needing this lol Love Dolch on this thing :)
AL1 x2 | Southpaw extended 65 x2 | Southpaw Full Size x2 (when they ship) | TX-Cp x2 | Duck Jetfire | UK78 | Pearl 40 | TGR Alice | Doro67 (when it ships) | QXP (when it ships) | Singa Polycarb | ALF-x11 (when it ships)

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #111 on: Tue, 12 June 2018, 21:36:59 »
Alright. Threw some switches and keycaps onto the plate to check fit and everything looks about right. Will adjust some tolerances in the second proto so there's less of a chance of things not working out. Looks pretty nice with the dolch set on there. Just wished that this thing already worked.

Show Image
Show Image


Show Image
Show Image


Damn that looks good!

Is that the final place for the usb port? I'd've preferred it on the left or in the center =/

Offline Artist

  • Posts: 13
  • Location: Vietnam
  • A Fine Architect to be!
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #112 on: Wed, 13 June 2018, 01:23:53 »
Alright, been looking for st like this for a long time! I'm not a southpaw but my righthand need to do too much works at the moments with the usual layout!

Offline Windeh

  • Posts: 297
  • a no name
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #113 on: Wed, 13 June 2018, 03:43:53 »
Sad to see that the Hard Anodizing in Dark Grey will not be an option... If we are fine with the possible inconsistent shades, can we still go for the option? I'm really hoping for the Titanium Grey hue...

Offline Corgiattackkk

  • Posts: 86
  • Location: Antarctica
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #114 on: Wed, 13 June 2018, 07:39:30 »
Alright. Threw some switches and keycaps onto the plate to check fit and everything looks about right. Will adjust some tolerances in the second proto so there's less of a chance of things not working out. Looks pretty nice with the dolch set on there. Just wished that this thing already worked.

Show Image
Show Image


Show Image
Show Image


That looks seriously amazing! Great job and thanks for keeping us updated.

Offline Doonagoowin

  • Posts: 5
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #115 on: Wed, 13 June 2018, 07:46:41 »
In for updates. Great looking board!
I should be getting my V1 bent plate some time this week can't wait for that and this full size.

Offline rioc

  • Posts: 983
  • Location: such Place
  • Very Text - 键盘上瘾 ____rioc industries ink.
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #116 on: Wed, 20 June 2018, 04:45:03 »
following IC, might become my new board at work sometime ;)

Offline QiuFang

  • Posts: 58
  • Location: China
    • Owl Keyboard
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #117 on: Thu, 21 June 2018, 10:39:03 »
Alright. Threw some switches and keycaps onto the plate to check fit and everything looks about right. Will adjust some tolerances in the second proto so there's less of a chance of things not working out. Looks pretty nice with the dolch set on there. Just wished that this thing already worked.

Show Image
Show Image


Show Image
Show Image


If numpad is on the right side ...  perfect!

Offline p_blaze

  • Posts: 437
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #118 on: Thu, 21 June 2018, 12:23:17 »
Alright. Threw some switches and keycaps onto the plate to check fit and everything looks about right. Will adjust some tolerances in the second proto so there's less of a chance of things not working out. Looks pretty nice with the dolch set on there. Just wished that this thing already worked.

Show Image
Show Image


Show Image
Show Image


If numpad is on the right side ...  perfect!

omg my sides

Online happycamper87

  • Posts: 66
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #119 on: Thu, 21 June 2018, 13:59:01 »
Alright. Threw some switches and keycaps onto the plate to check fit and everything looks about right. Will adjust some tolerances in the second proto so there's less of a chance of things not working out. Looks pretty nice with the dolch set on there. Just wished that this thing already worked.

Show Image
Show Image


Show Image
Show Image


If numpad is on the right side ...  perfect!


Bruh

Offline bball2

  • Posts: 203
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #120 on: Thu, 21 June 2018, 14:28:05 »
If numpad is on the right side ...  perfect!

Lol

Offline azzurrini

  • Posts: 1
  • Location: Vietnam
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #121 on: Tue, 03 July 2018, 20:47:51 »
For Special Edition, I want to carve something on Top or Weight  :thumb:

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #122 on: Tue, 03 July 2018, 22:21:18 »
I'll see if I can offer engraving at a reasonable price, but its unlikely. I can most certainly offer custom laser though for the weight.



Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #123 on: Tue, 03 July 2018, 22:23:24 »
A little bit of an update before we get going. I've changed the format and kinda have a relatively set date for the buy. It'll be FCFS limited to 75 units overall starting mid August. I'll announce the exact date on the Reddit IC later tonight or tomorrow. I know that there is a considerable amount more interest, but keeping it lower keeps me from having a perpetual headache. I'll also be hosting the GB for Lunar at the same time so I would optimally like to limit the number of units sold. If there is enough interest, again, I'll host another round.

As far as format is concerned, you can choose your color/finish, if you want a weight, and your plate configuration. The final options look like this... Actually, colors haven't been finalized yet.

Colors+Finishes  -  Cyan, purple, and red will only be available with in the 6-series alloy.
- Black
- Grey
- Silver
- Cyan
- Purple
- Red
- Hard Anodized Black
- Raw (Without any finishing)

Plates  -  Aluminum plates will be machined out of 6 series aluminum.
- Sandblasted Brass full plate, standard numpad
- Sandblasted Brass full plate, mirrored numpad
- Anodized Aluminum full plate, standard numpad
- Anodized Aluminum full plate, mirrored numpad
- Anodized Aluminum half plate, standard numpad
- Anodized Aluminum half plate, mirrored numpad
« Last Edit: Wed, 11 July 2018, 02:04:58 by reconsiderit »

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #124 on: Tue, 03 July 2018, 22:46:32 »
Whooo! Excited for this to finally be gong to gb soon!

Offline att1cus

  • * Maker
  • Posts: 176
  • Location: USA - Philadelphia
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #125 on: Wed, 04 July 2018, 10:23:12 »
I'll announce the exact date on the Reddit IC later tonight or tomorrow.

Sorry if I missed it, but is there a link to the Reddit IC post you mentioned?

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #126 on: Wed, 04 July 2018, 11:21:51 »
I'll announce the exact date on the Reddit IC later tonight or tomorrow.

Sorry if I missed it, but is there a link to the Reddit IC post you mentioned?

A link would be nice since I missed it too

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #127 on: Wed, 04 July 2018, 16:30:02 »
I'll announce the exact date on the Reddit IC later tonight or tomorrow.

Sorry if I missed it, but is there a link to the Reddit IC post you mentioned?

A link would be nice since I missed it too

I got swamped with work yesterday and didn't get a chance to put it up. I'll try again today.

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #128 on: Thu, 05 July 2018, 17:28:33 »
Alright. The reddit IC post is up and running. I'm going through and finalizing things at the moment and cleaning up the top post to better reflect what the final GB post will look like.

https://www.reddit.com/r/mechmarket/comments/8we633/ic_southpaw_full_size/

Offline att1cus

  • * Maker
  • Posts: 176
  • Location: USA - Philadelphia
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #129 on: Thu, 05 July 2018, 17:39:55 »
Alright. The reddit IC post is up and running. I'm going through and finalizing things at the moment and cleaning up the top post to better reflect what the final GB post will look like.

https://www.reddit.com/r/mechmarket/comments/8we633/ic_southpaw_full_size/

Awesome update!  Thanks!

Offline 112227

  • Posts: 67
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #130 on: Thu, 05 July 2018, 18:12:55 »
Looks great. Would love it even more if nav cluster/arrows were on the left as well.

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5183
  • Location: United Kingdom
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #131 on: Thu, 05 July 2018, 18:25:30 »
Looks great. Would love it even more if nav cluster/arrows were on the left as well.

Between the numpad and main portion?

Offline 112227

  • Posts: 67
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #132 on: Fri, 06 July 2018, 09:22:41 »
Looks great. Would love it even more if nav cluster/arrows were on the left as well.

Between the numpad and main portion?

Yes sir Mr. Xondat. I'm sure that board already exists, right? 

Offline yqliang

  • Posts: 25
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #133 on: Fri, 06 July 2018, 09:52:57 »
looks great!
Nightfox Zealios 65g | Input Club K-Type Halo | Cooler Master Masterkeys Pro S x Norbauer Cherry MX Brown | SA Hyperfuse | XDA MiTo Godspeed | DSA K Bares Miami Dolch

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #134 on: Sat, 07 July 2018, 04:17:33 »
Looks great. Would love it even more if nav cluster/arrows were on the left as well.

Between the numpad and main portion?

Yes sir Mr. Xondat. I'm sure that board already exists, right?

A board like that does exist iirc, but the idea here with the nav cluster on the opposite side of the numpad was that you could use the arrow keys to navigate through things like a spreadsheet or photo album and put numbers or values in simultaneously without having to keep moving your hand from one place to the other. 

Offline 112227

  • Posts: 67
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #135 on: Sat, 07 July 2018, 07:11:24 »
Looks great. Would love it even more if nav cluster/arrows were on the left as well.

Between the numpad and main portion?

Yes sir Mr. Xondat. I'm sure that board already exists, right?

A board like that does exist iirc, but the idea here with the nav cluster on the opposite side of the numpad was that you could use the arrow keys to navigate through things like a spreadsheet or photo album and put numbers or values in simultaneously without having to keep moving your hand from one place to the other.

very true. That is more convenient than using the mouse.

Offline att1cus

  • * Maker
  • Posts: 176
  • Location: USA - Philadelphia
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #136 on: Sat, 07 July 2018, 16:01:59 »
Any estimate on what time it will open on 7/16? I'll be on vacation and will need to arrange WiFi access to enter.

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #137 on: Sat, 07 July 2018, 16:06:31 »
Any estimate on what time it will open on 7/16? I'll be on vacation and will need to arrange WiFi access to enter.

Same question here. I'll be on the other side of the world for business, so this will likely be in the middle of the night for me; need to set an alarm.

Offline Laughmaster

  • Posts: 34
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #138 on: Sat, 07 July 2018, 18:10:39 »
Colors+Finishes  -  Cyan, purple, and red will only be available with in the 6-series alloy.
- Black
- Grey
- Silver
- Cyan
- Purple
- Red
- Hard Anodized Black
- Raw (Without any finishing)
You also included blue, green, and orange anodizing on the IC; will they be available during the GB?

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #139 on: Sun, 08 July 2018, 00:18:26 »
Colors+Finishes  -  Cyan, purple, and red will only be available with in the 6-series alloy.
- Black
- Grey
- Silver
- Cyan
- Purple
- Red
- Hard Anodized Black
- Raw (Without any finishing)
You also included blue, green, and orange anodizing on the IC; will they be available during the GB?

There's very little interest in green and orange though a pretty solid amount of interest in the blue. I'll probably order an anodization sample of the blue and offer it as a color option but the other colors aren't looking like they'll be offered in the GB

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #140 on: Sun, 08 July 2018, 00:19:11 »
Any estimate on what time it will open on 7/16? I'll be on vacation and will need to arrange WiFi access to enter.

Same question here. I'll be on the other side of the world for business, so this will likely be in the middle of the night for me; need to set an alarm.

12:00am Monday July 16th

Offline portbaron

  • Posts: 287
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #141 on: Sun, 08 July 2018, 00:25:42 »
What site/where will the GB be once it's open?
  | LIVING THE 1800 LIFE |

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #142 on: Sun, 08 July 2018, 01:12:49 »
What site/where will the GB be once it's open?

Will be at https://switchplate.co/

Online nug

  • Posts: 45
  • Location: Melbourne
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #143 on: Sun, 08 July 2018, 02:56:47 »
12:00am Monday July 16th

I don't think I saw it posted anywhere, what time zone is this please?

Online reconsiderit

  • Thread Starter
  • Posts: 469
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #144 on: Sun, 08 July 2018, 03:18:51 »
12:00am Monday July 16th

I don't think I saw it posted anywhere, what time zone is this please?

heh, time zone is kinda important. Somehow forgot about that

Will be 12:00am PST PDT unless something drastic happens. I'll probably be sending an email out that weekend
« Last Edit: Sun, 08 July 2018, 19:39:37 by reconsiderit »

Offline portbaron

  • Posts: 287
Re: [IC] Southpaw Full Size -- GB opens July 16th
« Reply #145 on: Sun, 08 July 2018, 03:51:47 »
Lol I'm coming back late from Denver that night, and probably won't get home til almost 1. Hope it doesn't sell out in the first hour.
  | LIVING THE 1800 LIFE |

Offline att1cus

  • * Maker
  • Posts: 176
  • Location: USA - Philadelphia
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #146 on: Sun, 08 July 2018, 12:08:05 »
12:00am Monday July 16th

I don't think I saw it posted anywhere, what time zone is this please?

heh, time zone is kinda important. Somehow forgot about that


Will be 12:00am PST unless something drastic happens. I'll probably be sending an email out that weekend

Thank you!!  :thumb:
« Last Edit: Sun, 08 July 2018, 12:40:11 by att1cus »

Offline Francisco

  • Posts: 48
Re: [IC] Southpaw Full Size -- GB opens July 16th
« Reply #147 on: Sun, 08 July 2018, 12:49:03 »
Who is https://switchplate.co/  ?
Have they ever done a GB before?
What about Europe?
Thanks!


Offline SomePunkassKid

  • Posts: 17
  • Location: Houston, TX
Re: [IC] Southpaw Full Size -- GB opens July 16th
« Reply #148 on: Sun, 08 July 2018, 13:48:47 »
Who is https://switchplate.co/  ?
Have they ever done a GB before?
What about Europe?
Thanks!
I believe Switchplate is OP's (reconsiderit's) storefront.
Same place that did the Southpaw 65%.

This is a small GB, so there probably won't be proxies. But it's just an assumption. You'll have to wait and see what OP says.

Sent from my Potato using Tapatalk


Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [IC] Southpaw Full Size (Updated 6/10/18. Proto in hand)
« Reply #149 on: Sun, 08 July 2018, 14:56:00 »
12:00am Monday July 16th

I don't think I saw it posted anywhere, what time zone is this please?

heh, time zone is kinda important. Somehow forgot about that

Will be 12:00am PST unless something drastic happens. I'll probably be sending an email out that weekend

Oh. Midnight pst isn't very nice to the timezones to the east.