Author Topic: [IC] Satisfaction 75 - 75% w/ OLED and Knob (4/25 UPDATE - 5/6 GB START)  (Read 41292 times)

Uniwersel and 5 Guests are viewing this topic.

Online Visionaire

  • Posts: 271
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #200 on: Fri, 01 March 2019, 08:07:08 »
IC form completed
Duck Jetfire | Duck Eagle | Singa R2 | COD67 | TX75 | KBD75 (and more on the way... )

Offline p_blaze

  • Posts: 420
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #201 on: Fri, 01 March 2019, 18:05:55 »
Honestly, IC's should take a long time. Do not be afraid to delay the GB. Problems that could have been fixed in the IC showing up in the GB will suck for everyone is it seems to be becoming more common on newer GBs.

Offline lakeboredom

  • Posts: 101
  • Location: North Bay
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #202 on: Fri, 01 March 2019, 19:37:26 »
Please hold off so I csn save more $ for this lul! We just had the Xeno GB.

Offline ian13

  • Posts: 130
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #203 on: Fri, 01 March 2019, 20:00:25 »
Having this delay is actually quite good for me and my beloved wallet. My wallet will love me again. Even if it's just for a few weeks. Maybe.  :))

Offline KaosJ

  • Posts: 862
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #204 on: Sat, 02 March 2019, 16:28:34 »
Just one question, can the screen be more or less at the same height of the case or there will be a different height between them so a sort of hole? 
(I would prefer the screen to be at the same height of the case, so when you put the finger here you don't feel like there is a hole)

Offline sadmachine

  • Posts: 9
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #205 on: Sat, 02 March 2019, 20:01:40 »
Just one question, can the screen be more or less at the same height of the case or there will be a different height between them so a sort of hole? 
(I would prefer the screen to be at the same height of the case, so when you put the finger here you don't feel like there is a hole)

I agree that the screen flush with the case would make it cleaner...esp. easier to clean those inside edges where dust may collect over time.
Either way, so hyped.

Offline omjak

  • Posts: 50
  • Location: New Jersey
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #206 on: Sat, 02 March 2019, 21:49:00 »
Any thoughts on Gray (dark/titanium) alum, and or polycarb?

Offline bleair2

  • Posts: 1
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #207 on: Sun, 03 March 2019, 01:14:58 »
Answer is likely obvious, but... The PCB is going to work with cherry mx switches only?

Online vicissitude

  • Posts: 319
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #208 on: Sun, 03 March 2019, 02:45:28 »
Really love the navy blue color in your render.
Hope to see the real decent navy blue after anodized.
Thanks for the hard work.

Offline Xerra

  • Posts: 4
  • Location: Singapore
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #209 on: Sun, 03 March 2019, 07:03:39 »
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

Offline KaosJ

  • Posts: 862
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #210 on: Sun, 03 March 2019, 13:04:32 »
Just one question, can the screen be more or less at the same height of the case or there will be a different height between them so a sort of hole? 
(I would prefer the screen to be at the same height of the case, so when you put the finger here you don't feel like there is a hole)

I agree that the screen flush with the case would make it cleaner...esp. easier to clean those inside edges where dust may collect over time.
Either way, so hyped.

Cleaning might be also a reason but i meant for the aesthetic, a flush display with the case would look better imho

Offline sadmachine

  • Posts: 9
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #211 on: Sun, 03 March 2019, 15:12:36 »
Just one question, can the screen be more or less at the same height of the case or there will be a different height between them so a sort of hole? 
(I would prefer the screen to be at the same height of the case, so when you put the finger here you don't feel like there is a hole)

I agree that the screen flush with the case would make it cleaner...esp. easier to clean those inside edges where dust may collect over time.
Either way, so hyped.

Cleaning might be also a reason but i meant for the aesthetic, a flush display with the case would look better imho

Sorry, I meant to fully agree with you with the first part of my response then segue into a play on words. Failed delivery/poor attempt on my part. Pls give me a pass...studying for professional exams atm :confused:

Offline ian13

  • Posts: 130
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #212 on: Wed, 06 March 2019, 03:04:00 »
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

+1 Any update on this? I want to know as well.

Offline bball2

  • Posts: 156
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #213 on: Wed, 06 March 2019, 12:49:32 »

Online upas

  • Thread Starter
  • Posts: 150
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #214 on: Wed, 06 March 2019, 21:22:21 »
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

+1 Any update on this? I want to know as well.
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

I have not yet received the prototypes in hand, but my factory has sent me pictures of the white finish. It looks great :)



Hopefully when I have it in person, it will be just as great and satisfying. While I can't promise I'll offer it (the quality could be poor), it's looking promising.

Offline efftwo

  • Posts: 2
  • Location: SoCal
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #215 on: Wed, 06 March 2019, 21:23:30 »
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

+1 Any update on this? I want to know as well.
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

I have not yet received the prototypes in hand, but my factory has sent me pictures of the white finish. It looks great :)

Show Image


Hopefully when I have it in person, it will be just as great and satisfying.

Wow, that looks amazing. So excited for this..


Sent from my iPhone using Tapatalk

Offline KevlarBear

  • Posts: 69
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #216 on: Wed, 06 March 2019, 22:24:40 »
I'm incredibly hyped for this, great work so far

Offline Xerra

  • Posts: 4
  • Location: Singapore
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #217 on: Thu, 07 March 2019, 02:31:11 »
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

+1 Any update on this? I want to know as well.
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

I have not yet received the prototypes in hand, but my factory has sent me pictures of the white finish. It looks great :)

Show Image


Hopefully when I have it in person, it will be just as great and satisfying. While I can't promise I'll offer it (the quality could be poor), it's looking promising.

Thanks for the update! From the picture, the texture seems quite good. Can't really tell the temperature of the white though. I'm hoping it'd be slightly warmer, to match the WS1 of Mizu and Minimal! Anyways, good to see things progressing well!

Offline ian13

  • Posts: 130
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #218 on: Thu, 07 March 2019, 10:07:44 »
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

+1 Any update on this? I want to know as well.
Any updates on the white case option? Would be really nice to get something like the one in Mizu renders.

I have not yet received the prototypes in hand, but my factory has sent me pictures of the white finish. It looks great :)

Show Image


Hopefully when I have it in person, it will be just as great and satisfying. While I can't promise I'll offer it (the quality could be poor), it's looking promising.

Thanks for the update! From the picture, the texture seems quite good. Can't really tell the temperature of the white though. I'm hoping it'd be slightly warmer, to match the WS1 of Mizu and Minimal! Anyways, good to see things progressing well!

This!

I am hoping it turns out good as well!  :thumb:

Offline jortzii

  • Posts: 84
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #219 on: Tue, 12 March 2019, 01:29:03 »
Just wanted to say congrats on getting the website up and running! Canít wait for this board to move to GB. I need it!


Sent from my iPhone using Tapatalk

Online vicissitude

  • Posts: 319
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #220 on: Tue, 12 March 2019, 05:46:27 »
love the the white prototype.

Online Visionaire

  • Posts: 271
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #221 on: Tue, 12 March 2019, 07:08:05 »
Question: Is it possible to set the sensitivity of the knob in different modes? It looks like you're doing a lot of twisting to do small increments of volume change. Can this be adjusted to something more like 1 full turn goes from 0-100 in volume? Is that software driven?
Duck Jetfire | Duck Eagle | Singa R2 | COD67 | TX75 | KBD75 (and more on the way... )

Online rondg

  • Posts: 236
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #222 on: Tue, 12 March 2019, 18:41:17 »
I'm really looking forward on how the blue would look like. I'm planning to use Striker on this board  ;D

Offline Dovan1405

  • Posts: 42
  • Location: Bedok
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #223 on: Wed, 13 March 2019, 04:39:41 »
Has the weight been updated? You said you had something in mind. I love the clean look on this thou.

Will this board be limited or something???


Sent from my iPhone using Tapatalk

Offline Dennyroxsox

  • Posts: 54
  • a.k.a. Lollipopsaurus
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #224 on: Wed, 13 March 2019, 10:59:45 »
I totally missed the screen on this at first. I really love that idea. Will that be externally programmable? Or will it only feature the time/layer info? I don't want to go too far off scope from a keyboard, but putting a real computer with a clock in a board is a big deal. An OLED screen could really do almost anything...

It almost seems like what you're doing with the processor and screen is add a new dimension to customs, and I think that's really cool.

Online upas

  • Thread Starter
  • Posts: 150
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #225 on: Wed, 13 March 2019, 15:33:58 »
Has the weight been updated? You said you had something in mind. I love the clean look on this thou.

Will this board be limited or something???


Sent from my iPhone using Tapatalk

The weight design is complete :)

I promise, there will be a new wealth of information released once I receive my 2nd round prototypes. I like to show, not tell. It's way more satisfying :)

To maintain my sanity, the board will be limited. There will be more than 50 units though.

I totally missed the screen on this at first. I really love that idea. Will that be externally programmable? Or will it only feature the time/layer info? I don't want to go too far off scope from a keyboard, but putting a real computer with a clock in a board is a big deal. An OLED screen could really do almost anything...

It almost seems like what you're doing with the processor and screen is add a new dimension to customs, and I think that's really cool.

Right now, it features time, layer info, keymatrix info, lock indicators, and encoder mode. I don't have plans on adding further features at the moment, but it's all written in QMK, so others can build upon it. You're right that there is a real computer with a clock in there :)

Offline omjak

  • Posts: 50
  • Location: New Jersey
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #226 on: Wed, 13 March 2019, 21:31:44 »
To maintain my sanity, the board will be limited. There will be more than 50 units though.

that's very sad news for most of us

Online swangful

  • Posts: 341
  • Location: 949
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #227 on: Wed, 13 March 2019, 23:16:16 »
To maintain my sanity, the board will be limited. There will be more than 50 units though.

that's very sad news for most of us

Will this be a raffle style then? And yeah. Definitely tired of fighting for keyboards but..its the nature of the game.
Keycult No. 2 SS || Keycult No 1/65 || RAMA M65-A

Offline TheMastermind

  • Posts: 54
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #228 on: Wed, 13 March 2019, 23:26:06 »
To maintain my sanity, the board will be limited. There will be more than 50 units though.

that's very sad news for most of us

Will this be a raffle style then? And yeah. Definitely tired of fighting for keyboards but..its the nature of the game.

+1 this. Do we have a possible vendor for the GB?

Offline equalunique

  • Posts: 169
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #229 on: Thu, 14 March 2019, 07:28:40 »
I really like that your prototype supports ctrl+win+alt mods on either side of the space bar. Too often I run across kits that omit the win key and that's a dealbreaker IMO. I am not sure if I will have the $$$ to join this, but am pretty excited about your ortho60 design.

Sent from my LG-H918 using Tapatalk


Online upas

  • Thread Starter
  • Posts: 150
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #230 on: Thu, 14 March 2019, 09:15:26 »
To maintain my sanity, the board will be limited. There will be more than 50 units though.

that's very sad news for most of us

Will this be a raffle style then? And yeah. Definitely tired of fighting for keyboards but..its the nature of the game.

To maintain my sanity, the board will be limited. There will be more than 50 units though.

that's very sad news for most of us

Will this be a raffle style then? And yeah. Definitely tired of fighting for keyboards but..its the nature of the game.

+1 this. Do we have a possible vendor for the GB?

This will be FCFS.

I'm the vendor :) Check out my new store, https://cannonkeys.com !

Offline TuCZnak

  • Posts: 136
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #231 on: Thu, 14 March 2019, 11:09:21 »
This will be FCFS.

I'm the vendor :) Check out my new store, https://cannonkeys.com !
RIP, with raffle there was at least a chance to get it, now we won't even make it to checkout before they sell out
MOQ means Minimum Order Quantity. You either reach it or you don't, there's no "pushing for higher MOQ", just pushing for more orders.

Offline gt1989

  • Posts: 132
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #232 on: Thu, 14 March 2019, 11:15:09 »
I better make sure that I set up my alarms when we get the time info.

 :p

Offline phorx

  • Posts: 380
  • Location: Canada
  • Į\_(ツ)_/Į
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #233 on: Thu, 14 March 2019, 12:16:26 »
This will be FCFS.

I'm the vendor :) Check out my new store, https://cannonkeys.com !
RIP, with raffle there was at least a chance to get it, now we won't even make it to checkout before they sell out

That will depend on how many units this is limited to.  If itís 100, the chances improve greatly.

Iím looking forward to seeing what the colour/ano options are going to be when thatís finalized as well.  I may be looking for a ďrawĒ kit so hopefully thatís possible.

Online swangful

  • Posts: 341
  • Location: 949
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #234 on: Thu, 14 March 2019, 13:09:22 »
This will be FCFS.

I'm the vendor :) Check out my new store, https://cannonkeys.com !
RIP, with raffle there was at least a chance to get it, now we won't even make it to checkout before they sell out

That will depend on how many units this is limited to.  If itís 100, the chances improve greatly.

Iím looking forward to seeing what the colour/ano options are going to be when thatís finalized as well.  I may be looking for a ďrawĒ kit so hopefully thatís possible.

Hopefully 100
Keycult No. 2 SS || Keycult No 1/65 || RAMA M65-A

Offline Gobluebro

  • Posts: 39
  • Location: United States
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #235 on: Thu, 14 March 2019, 13:59:09 »

This will be FCFS.

I'm the vendor :) Check out my new store, https://cannonkeys.com !

Let's hope the website doesn't go down from all the traffic it will have once the group buy begins :)

Offline TheMastermind

  • Posts: 54
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #236 on: Thu, 14 March 2019, 16:43:08 »
This will be FCFS.

I'm the vendor :) Check out my new store, https://cannonkeys.com !
RIP, with raffle there was at least a chance to get it, now we won't even make it to checkout before they sell out

That will depend on how many units this is limited to.  If itís 100, the chances improve greatly.

Iím looking forward to seeing what the colour/ano options are going to be when thatís finalized as well.  I may be looking for a ďrawĒ kit so hopefully thatís possible.

Hopefully 100
Correct me if I'm wrong but I think op said 50 were being made.

Offline KevlarBear

  • Posts: 69
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #237 on: Thu, 14 March 2019, 16:46:14 »
Correct me if I'm wrong but I think op said 50 were being made.

To maintain my sanity, the board will be limited. There will be more than 50 units though.

Offline Moac

  • Posts: 11
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #238 on: Thu, 14 March 2019, 16:53:20 »
Any idea when we can expect final design and the options reveal?
Iíll most likely buy Box navy switches to go with this board.
I hope to be able to buy one before they are sold out , any plans for an additional batch if these sell well?


Sent from my iPhone using Tapatalk Pro

Offline p_blaze

  • Posts: 420
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #239 on: Thu, 14 March 2019, 18:15:14 »
Please don't do FCFS, all the bots and folks with flaming finger macros will get the board and flip it as usual

Offline KaosJ

  • Posts: 862
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #240 on: Thu, 14 March 2019, 18:57:33 »

This will be FCFS.

I'm the vendor :) Check out my new store, https://cannonkeys.com !

Let's hope the website doesn't go down from all the traffic it will have once the group buy begins :)

Please remember to share the Date/hour/timezone before the gb actually goes live (days before possibly).  I would be a bit disappointed to miss this to someone that enters just to flip. 

A time that is acceptable for both US and EU would be great to be honest (yeah EU people uses ANSI as well) 

Offline BlankeyGotCaps

  • Posts: 15
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #241 on: Fri, 15 March 2019, 10:45:35 »
^ Please give us a heads up.

Online vicissitude

  • Posts: 319
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #242 on: Fri, 15 March 2019, 10:55:41 »
FCFS  :eek: :eek:


Offline sozo

  • Posts: 19
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #243 on: Fri, 15 March 2019, 17:49:43 »
I can't wait

Offline Jermane

  • Posts: 6
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #244 on: Fri, 15 March 2019, 23:08:19 »
FCFS, yikes. Really hoping to get in on this.

Online Visionaire

  • Posts: 271
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #245 on: Fri, 15 March 2019, 23:14:55 »
FCFS, yikes. Really hoping to get in on this.

First post. Welcome to GH.
Duck Jetfire | Duck Eagle | Singa R2 | COD67 | TX75 | KBD75 (and more on the way... )

Offline TheMastermind

  • Posts: 54
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #246 on: Sat, 16 March 2019, 00:33:44 »
FCFS, yikes. Really hoping to get in on this.

First post. Welcome to GH.
Welcome to the hobby.  :-\

Offline Jermane

  • Posts: 6
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #247 on: Sat, 16 March 2019, 01:08:00 »
FCFS, yikes. Really hoping to get in on this.

First post. Welcome to GH.
Welcome to the hobby.  :-\

Oh I've been around just never made an account on here before but this board made me finally do it. ITS PERFECT.

Offline jortzii

  • Posts: 84
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #248 on: Sat, 16 March 2019, 01:08:31 »
FCFS, yikes. Really hoping to get in on this.
Itís really not as bad as it sounds. If you know the option ahead of time, itís a matter of filling out the fields for PP, username, and platform (typically) and then filling in the bubbles for what you want and hitting submit. Decide ahead of time and be quick and youíve got as good a chance as any

Online Sic_Alpha

  • Posts: 100
  • Location: Texas
Re: [IC] Satisfaction 75 - 75% Keyboard w/ OLED Screen and Rotary Encoder
« Reply #249 on: Sat, 16 March 2019, 01:17:50 »
If the options are known ahead of time.  Good GB should have that.  I've seen them where options were different/modified and completely new options appeared on the GB form when it went live.  Caused many to miss out.