Hello guys. We’re CHAOSERA
It has been quiet a long time after Heracles-80.
Today we’re back with our new kit “Cupid-65”.
After our EAU-75 and Heracles-80, we’re trying 65% lay out kit this time.
To conform the theme of Greek mythology, we named it Cupid-65. Based on this clue, our design concept came out.
Cupid is a cute chubby kid, so we incorporated a lot of curves into the design of the kit. And since Cupid is a bit naughty, we chose several vibrant colors for the Cupid-65.
Front:The design of the front of the kit is characterized by simplicity, the overall aesthetic is minimalist. There are three available manufacturing processes to choose from: anodizing, E-coated and powder coating.
..Back:In order to maintain a minimalist aesthetic, the back of the kit is a continuation of the front design with few embellishments, except for two symmetrical foot pads. The division line between the top and bottom covers is located at the bottom to ensure the overall integrity of the design. As with our previous products,
Cupid continues to hide the screws with foot pad.Colors:Anodizing (
green, silver,
red,
purple,
deep blue)
Grass green
Deep Ocean Blue
Heartseeker
Moonlight silver
Lavender Purple
E-coated(
white light blue))
Almond white
Minty Seabreeze
Powder coating(
pink,
orange,
yellow) Strawberry Milkshake Pink
Banana Milkshake Yellow
Grapefruit Soda Orange
AccessoriesSpecial keycaps (Not the final version)We have two 2.25U shift on this kit. Initially, our goal was to design a layout that stood out from other 65% kits on the market. However, we soon realized that keycap sets, including the base ones, seldom include two 2.25U Shift keys. Therefore, we have included one 2.25U Shift key as a special keycap in the Cupid package.
Titanium anodizing plates
It is the continuation of Heracles-80, but we have moved the Titanium anodizing on both sides of the kit, making it more visible without being too flashy.
Cupid-badge
We employed exquisite craftsmanship in creating this badge to ensure that Cupid's facial expression and hair are perfectly represented on this small piece. Two blades were even broken in the process of making a sample. (Please note that this is not the final version, so we welcome your feedback.) While there are still some details that require refinement, we are continuously polishing it to capture Cupid's lively and adorable temperament on this little badge.
About the structure
Due to the limited size, we were unable to use the same structure as we did on the Heracles-80. Instead, we opted for a traditional gasket design for Cupid-65. The use of a gasket will also make it easier to control the quality.
Specifications of Cupid-65:
Layout: 65%
Structure: Traditional gasket mount
Connection: Wired / Wireless
Battery capacity: 4000mAh
PCB: Via-compatible, full RGB, hotswap, with flex cuts
Typing angle: 6.5 degrees
Case material: 6063 aluminum alloy
Surface finishing: Anodizing/Electroplating/Powder coating
Plate: Standard PC plate (PCB mounted), optional aluminum plate (PCB mounted) / FR4 plate (PCB mounted) / PC plate(plate mounted)
Price: TBD