« previous next »
Pages:  [1]     Go Down

Author Topic: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK  (Read 3211 times)

0 Members and 1 Guest are viewing this topic.

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Trade Count: (0)
  • Thread Starter
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
[FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« on: Mon, 17 March 2014, 22:15:06 »
Selling my Phantom kit unfortunately, don't really want to let it go but I need the cash.

Comes with a Filco case, 100 MX blacks, PCB w/Teensy soldered & stainless steel plate.

$150 SOLD





Also selling my last SSK. Works great and has no sign of rust. Comes with included cable.

$200




« Last Edit: Tue, 18 March 2014, 05:39:00 by bueller »
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline skcheng

  • * Destiny Supporter
  • Trade Count: (0)
  • Posts: 913
  • Location: Tenafly, NJ USA
    • Tenafly Dentistry
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #1 on: Mon, 17 March 2014, 22:20:05 »
PM Sent.   
Logged

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Trade Count: (0)
  • Thread Starter
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #2 on: Mon, 17 March 2014, 22:40:07 »
And replied to! Just a heads up everyone, not interested in splitting up the Phantom kit at the moment as I'll be stuck with the leftovers, really need the cash as well.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline berserkfan

  • Trade Count: (0)
  • Posts: 2135
  • Location: Not CONUS Not CONUS Not CONUS Not CONUS
  • changing diapers is more fun than model f assembly
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #3 on: Mon, 17 March 2014, 22:49:30 »
OMG, what else did you buy that has made you so short of money that you need to sell your last SSK?

Most people won't sell their last SSK until it was pried out of their dead hands.  :p

BTW the phantom kit sounds like great value. Any idea whether it is possible to buy a 7bit plate nowadays? The group buy thread has essentially been closed.
Logged
Most of the modding can be done on your own once you break through the psychological barriers.

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Trade Count: (0)
  • Thread Starter
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #4 on: Mon, 17 March 2014, 22:59:41 »
Quote from: berserkfan on Mon, 17 March 2014, 22:49:30
OMG, what else did you buy that has made you so short of money that you need to sell your last SSK?

Most people won't sell their last SSK until it was pried out of their dead hands.  :p

BTW the phantom kit sounds like great value. Any idea whether it is possible to buy a 7bit plate nowadays? The group buy thread has essentially been closed.

Nothing unfortunately, found myself without a job recently so I'm liquidating everything in sight to pay the bills.

Not sure on the 7bit plate, they're probably hard to come by these days.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline PrpnNightmare

  • Trade Count: (0)
  • Posts: 19
  • Location: Australia
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #5 on: Mon, 17 March 2014, 23:00:34 »
YGPM. :)
Logged

Offline berserkfan

  • Trade Count: (0)
  • Posts: 2135
  • Location: Not CONUS Not CONUS Not CONUS Not CONUS
  • changing diapers is more fun than model f assembly
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #6 on: Mon, 17 March 2014, 23:12:07 »
Quote from: bueller on Mon, 17 March 2014, 22:59:41
Quote from: berserkfan on Mon, 17 March 2014, 22:49:30
OMG, what else did you buy that has made you so short of money that you need to sell your last SSK?

Most people won't sell their last SSK until it was pried out of their dead hands.  :p

BTW the phantom kit sounds like great value. Any idea whether it is possible to buy a 7bit plate nowadays? The group buy thread has essentially been closed.

Nothing unfortunately, found myself without a job recently so I'm liquidating everything in sight to pay the bills.

Not sure on the 7bit plate, they're probably hard to come by these days.

Btw sent you a PM

Am serious about buying, but just got to clarify some things first. Especially since I already know I'm not going to use the black switches and the plate isn't my first choice of layout (7bit is) so I gotta figure things out first.
Logged
Most of the modding can be done on your own once you break through the psychological barriers.

Offline ebacho

  • Trade Count: (0)
  • Posts: 287
  • Location: California
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #7 on: Mon, 17 March 2014, 23:30:51 »
Quote from: berserkfan on Mon, 17 March 2014, 23:12:07
Quote from: bueller on Mon, 17 March 2014, 22:59:41
Quote from: berserkfan on Mon, 17 March 2014, 22:49:30
OMG, what else did you buy that has made you so short of money that you need to sell your last SSK?

Most people won't sell their last SSK until it was pried out of their dead hands.  :p

BTW the phantom kit sounds like great value. Any idea whether it is possible to buy a 7bit plate nowadays? The group buy thread has essentially been closed.

Nothing unfortunately, found myself without a job recently so I'm liquidating everything in sight to pay the bills.

Not sure on the 7bit plate, they're probably hard to come by these days.

Btw sent you a PM

Am serious about buying, but just got to clarify some things first. Especially since I already know I'm not going to use the black switches and the plate isn't my first choice of layout (7bit is) so I gotta figure things out first.

FWIW you need a case that accommodates 7bit layout too.  The 150 ANSI plate I have is just like that, and you can just leave the spots open for switches you don't plan to use and get a normal layout.  Also iirc true 7bit layout has many more keys and a short space in the bottom row.
Logged

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Trade Count: (0)
  • Thread Starter
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #8 on: Tue, 18 March 2014, 05:38:39 »
Phantom sold.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Trade Count: (0)
  • Thread Starter
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #9 on: Tue, 18 March 2014, 23:04:05 »
Bump the SSK, last day here before I send it to eBay.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED

Offline bueller

  • MX baller
  • * Esteemed Elder
  • Trade Count: (0)
  • Thread Starter
  • Posts: 3769
  • Location: Perth, Australia
  • Church of the Ergo Clear
Re: [FS] Phantom PCB/Case/Plate/Switches | IBM SSK
« Reply #10 on: Wed, 19 March 2014, 09:26:40 »
SSK is withdrawn, going to try selling it elsewhere.
Logged
Quote from: HoffmanMyster on Tue, 20 January 2015, 19:52:41
It's a good width!  If it's half-width it's too narrow, and full-width is too wide. 

[WTT] bueller's trade thread - CLACKS WANTED
Pages:  [1]     Go Up
« previous next »