Let's say I swap Novatouch stems into a RF 86u. At that point it would fit a winkeyless Cherry set fully except for the caps lock and spacebar. The spacebar would require physical modding to fit new stabs (as 7x Topre spacebar stem spacing is different than Cherry 7x) but the contact pad is in the center, so it wouldn't need to be moved. I think I have a clear idea about how to do this.
However, with the caps lock, I am less sure how I would proceed. After I cut the plate to move the switch, I'd either have to rework the PCB to move the contact pad to the left, or somehow rig it up so the off-center slider still pushes the spring down onto the pad in its original location.
Thoughts about the best way to do this?