Hello nerds.
I'm constructing a keyboard for a personal project, but i'm not very good with controllers and firmware and stuff. For some time was trying to set up tmk keyboard in my arduino nano with no luck.
For the sake of examle I'm using gh60, here's how:
git clone https://github.com/tmk/tmk_keyboard.git
cd tmk_keyboard/keyboard/gh60
make KEYMAP=poker
sudo ./avrdude -C ../etc/avrdude.conf -p atmega328p -vv -c arduino -b 57600 -P /dev/ttyUSB0 -D -Uflash:w:gh60_lufa.hex:iIt uploads the hex with no problems, but the chip just does nothing. I'm trying to connect the inputs but it has no effect. What am I missing?
I also tried uploading hex'es from keyboard editor
http://www.tmk-kbd.com/tmk_keyboard/editor/hhkb/index.htmlI'm also pretty sure that hardware is functional, because I tried on several of these chips
UPDATEI tried installing building onekey with vusb:
cd onekey
make clean
make -f Makefile.vusbAlso tried setting
MCU = atmega328p in Makefile.vusb
Then tried shorting pb0 and pb1 (which are d9 and d8 on arduino)
But still no effect