Author Topic: My new Unicomp Model M keyboard  (Read 1810 times)

0 Members and 1 Guest are viewing this topic.

Offline 5443

  • Thread Starter
  • Posts: 13
My new Unicomp Model M keyboard
« on: Sat, 13 July 2024, 06:51:08 »
Unicomp Model M, Filco Tenkeyless

Still testing it out, pretty good, any suggestions what I should do to the new keyboard next?



Offline Rhienfo

  • Posts: 764
  • Location: Melbourne, Australia
  • Why is everything I want here so expensive :(
Re: My new Unicomp Model M keyboard
« Reply #1 on: Sat, 13 July 2024, 10:59:43 »
For the filco, would recommend swapping the keycaps with something else, filco caps aren't really that good. DCS keycaps from signature plastics seem like a good fit for them, gmk caps work fine too but I heard there is some interference with the costar stabs.

I would also personally replace the internals with a replacement PCB and plate, because cherry stabs are a lot more convenient for pretty similar results, or at least modding the switches by spring swapping the switches with something like 55g tx springs, lube the springs with 105g0 and then resoldering. But I would understand not doing that because those parts are pretty hard to come by and also desoldering filco boards sucks because the solder isn't leaded.

With the unicomp, there really isn't too much to do with it. Unicomp boards are boards you don't really need to tinker with. It's pretty good stock.
keyboard collection - fjell
More
cherry blacks - unlubed - filmed and springswapped with tx 55g mediums - alu Plate | pretty happy with this, the blacks were cherry picked so they weren't that scratchy to begin with, but currently breaking them in, may lube them with a dry lube like ro59 or ptfe powder.
| hhkb bt
More
lubed with tribosys 3203 | like topre a lot, prefer it lubed but did make less tactile but that might have been a skill issue. probably will get more tactile over time as the domes age.
| m0115
More
bad orange alps lol | definitely needs a restoration. planning on wax boiling them and maybe a replacement pcb because the board has only 2 key rollover apparently.
| praxis
More
gateron yellows - lubed with 205g0 - 62g tx mediums - pc plate | probably my favourite keyboard already, feels super nice and sounds pretty good, it's got a great layout as well. probably gonna build this with mx browns, I feel like it would suit the board more.
| camo filco
More
stock with silent reds | Pretty cool looking board, the silent reds are actually good, they are smooth and I don't mind the mushiness (it's not even that mushy as well). the layout is pretty weird, but is useable. will probably mod this in the future. maybe a pcb and plate swap, change the keycaps to something dolch like, and also spring swap the springs in the silent reds.
| ibm model f at
More
stock, needs a cleaning and probably replacement foam. Do plan to change layout so it has split bs and rs, as well as ansi enter.
| baebae tkl
More
Built with new nixies on pc half plate. Love this board already, probably the best looking board I own, those brass accents are so mint. Really like it as is, but I do want to try an alu build (probably with nixies as well) just to experiment with that.

collection in pixel art
More

Offline wjrii

  • Posts: 129
  • Location: Texas
Re: My new Unicomp Model M keyboard
« Reply #2 on: Sun, 14 July 2024, 00:00:06 »
Unicomp Model M, Filco Tenkeyless

Still testing it out, pretty good, any suggestions what I should do to the new keyboard next?

Show Image


Yeah, there's not a whole lot to do with a Unicomp in good repair.  It is what it is.  If you want to have some fun, Unicomp sells keycaps in different colors and a few dye-sub novelties.  I guess there's the floss mod if you want to get really persnickety, but it seems a lot of people don't get the results they want.

Offline Rhienfo

  • Posts: 764
  • Location: Melbourne, Australia
  • Why is everything I want here so expensive :(
Re: My new Unicomp Model M keyboard
« Reply #3 on: Sun, 14 July 2024, 00:20:07 »
Unicomp Model M, Filco Tenkeyless

Still testing it out, pretty good, any suggestions what I should do to the new keyboard next?

Show Image


Yeah, there's not a whole lot to do with a Unicomp in good repair.  It is what it is.  If you want to have some fun, Unicomp sells keycaps in different colors and a few dye-sub novelties.  I guess there's the floss mod if you want to get really persnickety, but it seems a lot of people don't get the results they want.
pi
I see the floss mod as kind of a pointless thing. It's pretty loud anyway the pinging isn't that big of a deal, besides the pinging adds character.
keyboard collection - fjell
More
cherry blacks - unlubed - filmed and springswapped with tx 55g mediums - alu Plate | pretty happy with this, the blacks were cherry picked so they weren't that scratchy to begin with, but currently breaking them in, may lube them with a dry lube like ro59 or ptfe powder.
| hhkb bt
More
lubed with tribosys 3203 | like topre a lot, prefer it lubed but did make less tactile but that might have been a skill issue. probably will get more tactile over time as the domes age.
| m0115
More
bad orange alps lol | definitely needs a restoration. planning on wax boiling them and maybe a replacement pcb because the board has only 2 key rollover apparently.
| praxis
More
gateron yellows - lubed with 205g0 - 62g tx mediums - pc plate | probably my favourite keyboard already, feels super nice and sounds pretty good, it's got a great layout as well. probably gonna build this with mx browns, I feel like it would suit the board more.
| camo filco
More
stock with silent reds | Pretty cool looking board, the silent reds are actually good, they are smooth and I don't mind the mushiness (it's not even that mushy as well). the layout is pretty weird, but is useable. will probably mod this in the future. maybe a pcb and plate swap, change the keycaps to something dolch like, and also spring swap the springs in the silent reds.
| ibm model f at
More
stock, needs a cleaning and probably replacement foam. Do plan to change layout so it has split bs and rs, as well as ansi enter.
| baebae tkl
More
Built with new nixies on pc half plate. Love this board already, probably the best looking board I own, those brass accents are so mint. Really like it as is, but I do want to try an alu build (probably with nixies as well) just to experiment with that.

collection in pixel art
More