Author Topic: [FS] Pink GON PS2AVR WKL (sold) (Read 6290 times)

Turkishrambo · « **on:** Mon, 14 July 2014, 22:38:50 »

SOLD

Asking $200CAD + shipping, OBO.

Pink, Non-matching screws, unmodded clear switches, 86 key winkeyless.

LED's do not function correctly, inconsistent lighting. Don't recommend using unless you want to fix it yourself. Keyboard functions perfectly otherwise.

Pictures:

Turkishrambo · « **Reply #1 on:** Wed, 16 July 2014, 22:50:54 »

Bump.

Patchwrks · « **Reply #2 on:** Wed, 16 July 2014, 22:58:46 »

Turkishrambo · « **Reply #3 on:** Wed, 16 July 2014, 23:07:22 »

Here is a picture of the LEDs. Not sure if i used the incorrect resistors, poor resistor soldering, etc (ignore the green led, its now a white). If someone has an answer i would gladly fix it before sending it off

Patchwrks · « **Reply #4 on:** Wed, 16 July 2014, 23:14:39 »

what's shipping to 23112?

Turkishrambo · « **Reply #5 on:** Wed, 16 July 2014, 23:18:13 »

Quote from: patchworks on Wed, 16 July 2014, 23:14:39

what's shipping to 23112?

What state?

A few others are inquring about shipping to the US. Im pretty sure shipping with tracking would be something like 15-25$. Im making a run to the post office tomorrow to get quotes.

Xenderwind · « **Reply #6 on:** Wed, 16 July 2014, 23:21:31 »

Quote from: Turkishrambo on Wed, 16 July 2014, 23:18:13

Quote from: patchworks on Wed, 16 July 2014, 23:14:39
what's shipping to 23112?
What state?

A few others are inquring about shipping to the US. Im pretty sure shipping with tracking would be something like 15-25$. Im making a run to the post office tomorrow to get quotes.

virginia

awong · « **Reply #7 on:** Wed, 16 July 2014, 23:31:58 »

Is keyboard programmable?

Turkishrambo · « **Reply #8 on:** Wed, 16 July 2014, 23:40:52 »

Quote from: Xenderwind on Wed, 16 July 2014, 23:21:31

Quote from: Turkishrambo on Wed, 16 July 2014, 23:18:13
Quote from: patchworks on Wed, 16 July 2014, 23:14:39
what's shipping to 23112?
What state?

A few others are inquring about shipping to the US. Im pretty sure shipping with tracking would be something like 15-25$. Im making a run to the post office tomorrow to get quotes.

virginia

I will find out tomorrow.

Quote from: awong on Wed, 16 July 2014, 23:31:58

Is keyboard programmable?

Yes (pretty sure, i don't really delve into that kinda stuff.)

I got firmware here.

http://winkeyless.kr/17

combataran · « **Reply #9 on:** Thu, 17 July 2014, 01:38:17 »

Quote from: Turkishrambo on Wed, 16 July 2014, 23:07:22

Here is a picture of the LEDs. Not sure if i used the incorrect resistors, poor resistor soldering, etc (ignore the green led, its now a white). If someone has an answer i would gladly fix it before sending it off

Show Image

Ask Sifo about this. He might be able to help.

Sifo · « **Reply #10 on:** Thu, 17 July 2014, 01:51:39 »

Quote from: combataran on Thu, 17 July 2014, 01:38:17

Quote from: Turkishrambo on Wed, 16 July 2014, 23:07:22
Here is a picture of the LEDs. Not sure if i used the incorrect resistors, poor resistor soldering, etc (ignore the green led, its now a white). If someone has an answer i would gladly fix it before sending it off

Show Image

Ask Sifo about this. He might be able to help.

My a. 87 (not a ps2avr) did the exact same thing shown in this pic, so it's good to see I'm not the only one who experienced it. It is something to do with the Resistors but I'm not sure what, I applied a very ghetto fix that isn't actually perfect either. Idk it's really weird. I can't really explain the ghetto fix either...

Neo.X · « **Reply #11 on:** Thu, 17 July 2014, 08:20:04 »

Nice keyboard. Very tempting.

Does it require de-soldering the switch to mod it?

Turkishrambo · « **Reply #12 on:** Thu, 17 July 2014, 08:36:06 »

Quote from: Sifo on Thu, 17 July 2014, 01:51:39

Quote from: combataran on Thu, 17 July 2014, 01:38:17
Quote from: Turkishrambo on Wed, 16 July 2014, 23:07:22
Here is a picture of the LEDs. Not sure if i used the incorrect resistors, poor resistor soldering, etc (ignore the green led, its now a white). If someone has an answer i would gladly fix it before sending it off

Show Image

Ask Sifo about this. He might be able to help.
My a. 87 (not a ps2avr) did the exact same thing shown in this pic, so it's good to see I'm not the only one who experienced it. It is something to do with the Resistors but I'm not sure what, I applied a very ghetto fix that isn't actually perfect either. Idk it's really weird. I can't really explain the ghetto fix either...

ಠ_ಠ

Does it involve reheating? Something to point in the right direction? :P

Sifo · « **Reply #13 on:** Thu, 17 July 2014, 10:47:03 »

Quote from: Turkishrambo on Thu, 17 July 2014, 08:36:06

Quote from: Sifo on Thu, 17 July 2014, 01:51:39
Quote from: combataran on Thu, 17 July 2014, 01:38:17
Quote from: Turkishrambo on Wed, 16 July 2014, 23:07:22
Here is a picture of the LEDs. Not sure if i used the incorrect resistors, poor resistor soldering, etc (ignore the green led, its now a white). If someone has an answer i would gladly fix it before sending it off

Show Image

Ask Sifo about this. He might be able to help.
My a. 87 (not a ps2avr) did the exact same thing shown in this pic, so it's good to see I'm not the only one who experienced it. It is something to do with the Resistors but I'm not sure what, I applied a very ghetto fix that isn't actually perfect either. Idk it's really weird. I can't really explain the ghetto fix either...
ಠ_ಠ

Does it involve reheating? Something to point in the right direction? :P

Learn the circuit and solder the one side of the resistor directly onto an led pin (my SMD pads are shared with the led through holes)

taylordcraig · « **Reply #14 on:** Fri, 18 July 2014, 04:50:17 »

too bad it's pink, would love to pick up a gon board

Turkishrambo · « **Reply #15 on:** Fri, 18 July 2014, 07:39:24 »

I was busier than expected yesterday. Will do my best to get to the post office today

asassdsd · « **Reply #16 on:** Mon, 21 July 2014, 16:26:56 »

is it still available?

Turkishrambo · « **Reply #17 on:** Mon, 21 July 2014, 18:57:10 »

It is but i need to quote people still. I've been too busy to get to the post office (no car). Im very sorry to anyone who was interested. I will quote those people before making it available to anyone else.

asassdsd · « **Reply #18 on:** Mon, 21 July 2014, 19:58:08 »

Welp count me in.

Turkishrambo · « **Reply #19 on:** Wed, 23 July 2014, 10:27:37 »

Tentatively sold. Invoiced.

Turkishrambo · « **Reply #20 on:** Wed, 30 July 2014, 20:08:47 »

invoice not payed. Going to next person in line.

Turkishrambo · « **Reply #21 on:** Thu, 04 September 2014, 08:18:27 »

I have been super busy, this is still available. Reducing to 220 CAD, Ready to ship next day (because work in afternoons)

Turkishrambo · « **Reply #22 on:** Thu, 11 September 2014, 21:22:05 »

GL1TCH3D · « **Reply #23 on:** Thu, 11 September 2014, 22:35:32 »

I could probably take a train there ~.~

Any discounts if I pick it up in Ottawa? (Besides shipping of course)

Turkishrambo · « **Reply #24 on:** Sun, 14 September 2014, 18:29:03 »

i would do 200 cash in person if you are able to make it here.

Turkishrambo · « **Reply #25 on:** Mon, 15 September 2014, 20:31:34 »

Lastpilot · « **Reply #26 on:** Tue, 16 September 2014, 12:42:57 »

If someone just wants the case, let me know, I'll buy the pcb with switches.

Turkishrambo · « **Reply #27 on:** Sun, 28 September 2014, 14:32:25 »

bump

Turkishrambo · « **Reply #28 on:** Wed, 01 October 2014, 20:58:55 »

210$ bump

Turkishrambo · « **Reply #29 on:** Thu, 09 October 2014, 13:50:54 »

200$ bump

SpicyLobotomy · « **Reply #30 on:** Mon, 13 October 2014, 09:51:44 »

Very interested. PM'd

henz · « **Reply #31 on:** Mon, 13 October 2014, 10:14:29 »

such a good price, too bad its pink, would have been all over this otherwise :/

Battou62 · « **Reply #32 on:** Mon, 13 October 2014, 12:54:26 »

Quote from: henz on Mon, 13 October 2014, 10:14:29

such a good price, too bad its pink, would have been all over this otherwise :/

This board would have been gone months ago if it wasn't pink. STOP MAKING PINK BOARDS! I apologize, I don't want to summon Sifo up in here.

Turkishrambo · « **Reply #33 on:** Tue, 14 October 2014, 08:40:17 »

It goes well with the miami set

henz · « **Reply #34 on:** Tue, 14 October 2014, 08:45:57 »

Quote from: Lastpilot on Tue, 16 September 2014, 12:42:57

If someone just wants the case, let me know, I'll buy the pcb with switches.

How much do i have to pay for the case if we go for it ? Pm me plx

Mikey Mo · « **Reply #35 on:** Tue, 14 October 2014, 09:57:53 »

pm'd ， interesting for keyboard and miami set

Turkishrambo · « **Reply #36 on:** Tue, 14 October 2014, 10:24:01 »

I don't have the miami set anymore

sorry

this is what it looks like though

BunnyLake · « **Reply #37 on:** Tue, 14 October 2014, 10:28:58 »

gorgeous board, what a great deal

Turkishrambo · « **Reply #38 on:** Tue, 14 October 2014, 20:52:35 »

tentatively sold. Will update if available again

Turkishrambo · « **Reply #39 on:** Wed, 15 October 2014, 17:49:13 »

News:

Author Topic: [FS] Pink GON PS2AVR WKL (sold) (Read 6290 times)