Author Topic: New member, looking for a Australian members!  (Read 1957 times)

0 Members and 1 Guest are viewing this topic.

Offline Tweetwoof

  • Thread Starter
  • Posts: 0
  • Location: Queensland, Australia
New member, looking for a Australian members!
« on: Fri, 05 August 2016, 03:31:18 »
Hi all!

I've been drooling over keyboards for a while now and am finally going to start taking a dive in to the dangerously addictive world.

I've been looking for an Australian community but it doesn't seem to exist, any other Aussies on here? Queenslander!

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: New member, looking for a Australian members!
« Reply #1 on: Sun, 07 August 2016, 02:13:04 »
Welcome to Geekhack!

There's more of us here than you think, although most seem to be in NSW or WA.  Nevertheless there's a couple of very active Queenslanders around.

In fact there's even been a Sydney meetup!

PCCG (in Melbourne) and MechKB (https://mechkb.com/ - in Sydney) are probably the two better places to look for keyboards in Australia, MechKB especially.

Apart from that, get ready for excessive shipping costs from the US, and enjoy your stay :)
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline milchek

  • Posts: 73
  • Location: Melbourne, Australia
Re: New member, looking for a Australian members!
« Reply #2 on: Sun, 07 August 2016, 08:37:28 »
G'day, fellow Melbourne newbie here too. I've had a mechanical for a while as a gaming keyboard, but finally making the jump to using it full time as work KB as well.

Offline Tweetwoof

  • Thread Starter
  • Posts: 0
  • Location: Queensland, Australia
Re: New member, looking for a Australian members!
« Reply #3 on: Wed, 10 August 2016, 06:29:28 »
I've just ordered a V60 with blues that I'm expecting to arrive tomorrow. Also got some key caps on the way.

Next up I'm going to see if I can carbon wrap the top plate and then replace the case.

Pretty keen to get in to it all! I had a k70 RGB when they released but wasn't a fan of the reds it was using.

Offline fanpeople

  • Posts: 970
Re: New member, looking for a Australian members!
« Reply #4 on: Thu, 11 August 2016, 01:31:04 »
Queenslander here, originally from NSW but also lived in the NT.

Welcome, enjoy your stay. :thumb:

Offline milchek

  • Posts: 73
  • Location: Melbourne, Australia
Re: New member, looking for a Australian members!
« Reply #5 on: Thu, 11 August 2016, 06:13:30 »
I've just ordered a V60 with blues that I'm expecting to arrive tomorrow. Also got some key caps on the way.

Next up I'm going to see if I can carbon wrap the top plate and then replace the case.

Pretty keen to get in to it all! I had a k70 RGB when they released but wasn't a fan of the reds it was using.

Let us know how you go and post pics of the finished result. I'm keen to do similar mods to either a pok3r or v60, need to read up a little more about each board.

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: New member, looking for a Australian members!
« Reply #6 on: Sun, 14 August 2016, 01:36:06 »
I've just ordered a V60 with blues that I'm expecting to arrive tomorrow. Also got some key caps on the way.

Next up I'm going to see if I can carbon wrap the top plate and then replace the case.

Pretty keen to get in to it all! I had a k70 RGB when they released but wasn't a fan of the reds it was using.

Carbon-wrap the plate?  You'd need to remove all the switches for that.

Hydro-dipping is another option, and you wouldn't have to worry about the corners lifting.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ