Author Topic: [IC] TGR 910 PCBs and Plates (Read 45242 times)

futurecrime · « **Reply #100 on:** Fri, 10 January 2020, 08:12:35 »

Quote from: LightningXI on Fri, 10 January 2020, 07:42:25

Quote from: reconsiderit on Wed, 08 January 2020, 04:02:56
Going to be finalizing plate files and checking things over this week.

GB most likely next week or the week after.
Hype. Can't wait for a poly plate and extra PCB.

Same same. It's about time my 910s got some fresh guts.

reconsiderit · « **Reply #101 on:** Wed, 15 January 2020, 03:40:26 »

Going to proto before running the GB. Got the files today and sending them to JLC tonight. Should get them soonish to confirm everything works

romevi · « **Reply #102 on:** Fri, 17 January 2020, 00:28:43 »

Quote from: reconsiderit on Wed, 15 January 2020, 03:40:26

Going to proto before running the GB. Got the files today and sending them to JLC tonight. Should get them soonish to confirm everything works

reconsiderit · « **Reply #103 on:** Fri, 31 January 2020, 21:07:25 »

Small delay on the proto. CNY Extended a week as many of you guys know. Proto should be in my hands about mid February

Solotov · « **Reply #104 on:** Fri, 31 January 2020, 22:07:17 »

Will you provide half plate as well?

reconsiderit · « **Reply #105 on:** Sat, 01 February 2020, 21:29:55 »

Quote from: Solotov on Fri, 31 January 2020, 22:07:17

Will you provide half plate as well?

From the responses I've gathered from both the forms, I'll most likely be doing a poly full plate and a coated full brass plate.

reconsiderit · « **Reply #106 on:** Mon, 24 February 2020, 19:29:41 »

PCBs are finally headed to me. Should be able to test them and get the GB set up by the end of next week.

Edit: I'll also have 4 extras from the proto run available immediately (if they work) if anyone is in dire need of one of these.

lamenthe · « **Reply #107 on:** Fri, 03 April 2020, 01:17:00 »

If it's not too late I'd love to grab one of those proto boards. My current 910 has been out of commission for a few months due to a dead board. Let me know if there's one available! I'm still in for the group buy either way.

oldcat · « **Reply #108 on:** Fri, 10 April 2020, 15:00:38 »

great

johnny__whitewalker · « **Reply #109 on:** Tue, 23 June 2020, 21:28:45 »

any updates?

reconsiderit · « **Reply #110 on:** Wed, 01 July 2020, 19:56:26 »

Redid the plate this morning. Will be submitting for a quote tonight and should have the GB started soon. GB will be a month long.

Plate materials will be 1.5mm black anodized alu and 1.5mm polycarbonate. I may add brass but have to look at prices and MOQ from the factory. These will be cut with a 0.5mm radius so your fingers won't hurt once you've finished putting the board together.

Edit:

Realized that I never posted a pic of the PCB. I'm putting it together this week and throwing it into my 910 to make sure it fits.

LightningXI · « **Reply #111 on:** Wed, 01 July 2020, 20:18:20 »

Yes please.

zekkin · « **Reply #112 on:** Wed, 01 July 2020, 20:26:37 »

Please and thank you!!!

lamenthe · « **Reply #113 on:** Wed, 01 July 2020, 23:46:41 »

Thank you!

vegs · « **Reply #114 on:** Thu, 02 July 2020, 03:50:09 »

No hope for iso support?

finalarcadia · « **Reply #115 on:** Sun, 05 July 2020, 22:14:15 »

Is it just me, or is that left shift stab on the PCB north facing? Should be south no?

LightningXI · « **Reply #116 on:** Sun, 05 July 2020, 22:35:23 »

Quote from: finalarcadia on Sun, 05 July 2020, 22:14:15

Is it just me, or is that left shift stab on the PCB north facing? Should be south no?

Good observation - that seems like a mistake - it should be
- south-facing left shift and backspace
- north-facing enter

reconsiderit · « **Reply #117 on:** Tue, 07 July 2020, 02:59:16 »

Nice catch. I was just putting it together and realized at the last moment that something wasn't quite right. Good thing that was caught. Back into fusion the plate goes.

LightningXI · « **Reply #118 on:** Tue, 21 July 2020, 00:10:59 »

Quote from: reconsiderit on Tue, 07 July 2020, 02:59:16

Nice catch. I was just putting it together and realized at the last moment that something wasn't quite right. Good thing that was caught. Back into fusion the plate goes.

Show Image

Ne updates or did Fusion crash?

reconsiderit · « **Reply #119 on:** Wed, 22 July 2020, 17:09:14 »

Quote from: LightningXI on Tue, 21 July 2020, 00:10:59

Quote from: reconsiderit on Tue, 07 July 2020, 02:59:16
Nice catch. I was just putting it together and realized at the last moment that something wasn't quite right. Good thing that was caught. Back into fusion the plate goes.

Show Image

Ne updates or did Fusion crash?

Heh, fusion crashed while tryna push the stab cutouts forward and backwards to make room

Just finished setting up shopify for this and got quotes back from a few places for the plates. Should be ready to launch very soon.

finalarcadia · « **Reply #120 on:** Wed, 22 July 2020, 21:50:39 »

Just got a 910 so really looking forward to buying a couple pcbs or more

Hope you'll fix the stab on the PCB as well, not just plate

reconsiderit · « **Reply #121 on:** Sun, 26 July 2020, 02:09:48 »

Quote from: finalarcadia on Wed, 22 July 2020, 21:50:39

Just got a 910 so really looking forward to buying a couple pcbs or more Hope you'll fix the stab on the PCB as well, not just plate

Stab issue was just an issue with the plate. The PCB is fine.

PCB is getting requoted since it's been ages. GB should be ready very soon.

finalarcadia · « **Reply #122 on:** Sun, 26 July 2020, 03:12:50 »

Quote from: reconsiderit on Sun, 26 July 2020, 02:09:48

Quote from: finalarcadia on Wed, 22 July 2020, 21:50:39
Just got a 910 so really looking forward to buying a couple pcbs or more Hope you'll fix the stab on the PCB as well, not just plate

Stab issue was just an issue with the plate. The PCB is fine.

PCB is getting requoted since it's been ages. GB should be ready very soon.

It all depends on the plate of course. Just saying that if left shift remains north facing in the PCB, it won't work with original plates which are all south facing.

Sent from my Pixel 3 using Tapatalk

Yeoh · « **Reply #123 on:** Sun, 09 August 2020, 16:31:44 »

Really looking forward to this!

reconsiderit · « **Reply #124 on:** Mon, 10 August 2020, 06:00:30 »

Quote from: finalarcadia on Sun, 26 July 2020, 03:12:50

Quote from: reconsiderit on Sun, 26 July 2020, 02:09:48
Quote from: finalarcadia on Wed, 22 July 2020, 21:50:39
Just got a 910 so really looking forward to buying a couple pcbs or more Hope you'll fix the stab on the PCB as well, not just plate

Stab issue was just an issue with the plate. The PCB is fine.

PCB is getting requoted since it's been ages. GB should be ready very soon.
It all depends on the plate of course. Just saying that if left shift remains north facing in the PCB, it won't work with original plates which are all south facing.

PCB will be fixed to south facing left shift
Sent from my Pixel 3 using Tapatalk

fleeceman · « **Reply #125 on:** Mon, 10 August 2020, 15:39:27 »

Interested

reconsiderit · « **Reply #126 on:** Wed, 12 August 2020, 00:21:13 »

Starting the GB this weekend or on Monday of next week. Gonna run for 3 or 4 weeks. Need to work out the exact numbers but PCBs will be 45ish. Plates will be offered in the universal layout; similar to the stock 910 plates, but without split space compat and without iso compat. Will have PC, black anodized aluminum, and coated brass plates available.

romevi · « **Reply #127 on:** Wed, 12 August 2020, 01:03:49 »

Quote from: reconsiderit on Wed, 12 August 2020, 00:21:13

Starting the GB this weekend or on Monday of next week. Gonna run for 3 or 4 weeks. Need to work out the exact numbers but PCBs will be 45ish. Plates will be offered in the universal layout; similar to the stock 910 plates, but without split space compat and without iso compat. Will have PC, black anodized aluminum, and coated brass plates available.

Whoot!

johnny__whitewalker · « **Reply #128 on:** Mon, 17 August 2020, 22:47:20 »

we ready to go!?!?

reconsiderit · « **Reply #129 on:** Tue, 25 August 2020, 00:05:28 »

and we're live

https://switchplate.co/collections/910-plates-pcbs

Will close this thread and move it into GB shortly.

fleeceman · « **Reply #130 on:** Wed, 26 August 2020, 11:39:47 »

$51 to ship a PCB and plate to the UK? That's far too much. I've shipped 2kg keyboards from across the world for cheaper than that.

Sent from my Pixel 3a XL using Tapatalk

reconsiderit · « **Reply #131 on:** Wed, 26 August 2020, 15:46:51 »

Quote from: fleeceman on Wed, 26 August 2020, 11:39:47

$51 to ship a PCB and plate to the UK? That's far too much. I've shipped 2kg keyboards from across the world for cheaper than that.

Sent from my Pixel 3a XL using Tapatalk

It should show DHL as the only option right now. Pricing for DHL starts at 40-45 dollars or so due to covid. 51 does sound a tad high. I'll see if I can get product dimensions put into the system to maybe bring it down a little.

I've gotten a few emails regarding USPS. I'll make it an option, but please know that these are untracked and I've had packages go missing on me. USPS First Class should put you around the $15-20 mark for a plate and PCB. Should be available tomorrow or Friday once I've sorted a couple things out.

reconsiderit · « **Reply #132 on:** Thu, 27 August 2020, 03:31:20 »

Updated shipping for international customers. Manually calculated and played around with prices so they're a little lower now. Also added USPS first class.

fleeceman · « **Reply #133 on:** Thu, 27 August 2020, 04:27:53 »

Quote from: reconsiderit on Thu, 27 August 2020, 03:31:20

Show Image

Updated shipping for international customers. Manually calculated and played around with prices so they're a little lower now. Also added USPS first class.

Thank you for this, just placed an order for a PCB and plate!

Sent from my Pixel 3a XL using Tapatalk

johnny__whitewalker · « **Reply #134 on:** Thu, 27 August 2020, 17:41:59 »

@reconsiderit - Are you shipping these out from CA, or is it being shipped directly from the factory to us?

reconsiderit · « **Reply #135 on:** Fri, 28 August 2020, 19:00:57 »

Quote from: johnny__whitewalker on Thu, 27 August 2020, 17:41:59

@reconsiderit - Are you shipping these out from CA, or is it being shipped directly from the factory to us?

I'm shipping these out from CA. I'm not sure why it's giving a couple people sky high shipping prices.

I'm not able to input package sizes into shopify so it goes off of weight. I've weighed the PCBs and plates prior to putting them into the website and they're fairly light. If you're getting high shipping prices, please shoot me an email at mill@switchplate.co and I'll see what I can do to sort it out.

reconsiderit · « **Reply #136 on:** Fri, 28 August 2020, 19:10:41 »

Edit - I've just done the same thing for domestic rates. USPS seems to max out at 11.50 for the most expensive shipping option so that what I've used. Both rates, calculated and fixed should show up upon checkout. Please use the lower rate.

fleeceman · « **Reply #137 on:** Thu, 28 January 2021, 17:50:46 »

Any update on these?

Sent from my Pixel 3a XL using Tapatalk

reconsiderit · « **Reply #138 on:** Mon, 08 March 2021, 04:29:10 »

Quote from: fleeceman on Thu, 28 January 2021, 17:50:46

Any update on these?

Sent from my Pixel 3a XL using Tapatalk

There's a GB thread for it, but PCBs are done and shipped if your order did not contain plates. If it did, I made a mistake and they're being made again and should be done this month or next.

sup3r170va · « **Reply #139 on:** Mon, 08 March 2021, 06:01:07 »

Hi. Do u have any extra USB type C PCBs? If so, where can I get them? Thanks!

reconsiderit · « **Reply #140 on:** Mon, 22 March 2021, 07:28:58 »

Quote from: sup3r170va on Mon, 08 March 2021, 06:01:07

Hi. Do u have any extra USB type C PCBs? If so, where can I get them? Thanks!

These are mini only. No type C as it doesn't fit on the 910.

Randalljai · « **Reply #141 on:** Mon, 30 January 2023, 00:37:03 »

Chance of another run?

News:

Author Topic: [IC] TGR 910 PCBs and Plates (Read 45242 times)