Have you read the geekhack TOS lately?
0 Members and 1 Guest are viewing this topic.
Unlimited qty for non-pc?
Color updated :Case Purple/grey/green E-white /E-black/E-pinkPlategreen /E-white /E-black/E-pink/E-yellow/sand brass (e-clear)/Ti/pctop accent green /E-white /E-black/E-pink/E-yellow/sand brass (e-clear)/pvd silver/pc/light blueSide weight green /E-white /E-black/E-pink/E-yellow/sand brass (e-clear)Full brass verison (10 units) $888top and bottom case :sandblasted (e-clear) brass do e white or e black pcplate : sandblasted (e-clear) brass do e white or e black pctop accent: pvd silver/pvd black /black/white side weight : pvd silver/pvd black /black/white FE orders will get a extra brass sand weight for free (it will design for 3rd Anniversary)PCB : Black with gold trace .we will reserve RGB LED you can solder it yourselfhotswap pcb layout https://i.imgur.com/65o03dM.pngGasket mount need buy the inner middle ,default kit was top mount
No split backspace?
What is the top accent and side weight? Is that the bit on the top right?
Any ETA on the GB?
Quote from: Stan137 on Wed, 13 November 2019, 11:28:00Any ETA on the GB?He literally made a post 11hr ago saying more renders and date are coming. Use China time to your time, he's probably sleeping right now Sent from my SM-N960F using Tapatalk
Quote from: jooobe on Wed, 13 November 2019, 12:12:41Quote from: Stan137 on Wed, 13 November 2019, 11:28:00Any ETA on the GB?He literally made a post 11hr ago saying more renders and date are coming. Use China time to your time, he's probably sleeping right now Sent from my SM-N960F using TapatalkSo... any ETA?
Quote from: nathanchere on Wed, 13 November 2019, 12:38:20Quote from: jooobe on Wed, 13 November 2019, 12:12:41Quote from: Stan137 on Wed, 13 November 2019, 11:28:00Any ETA on the GB?He literally made a post 11hr ago saying more renders and date are coming. Use China time to your time, he's probably sleeping right now Sent from my SM-N960F using TapatalkSo... any ETA?YaSent from my SM-N960F using Tapatalk
Quote from: jooobe on Wed, 13 November 2019, 12:45:12Quote from: nathanchere on Wed, 13 November 2019, 12:38:20Quote from: jooobe on Wed, 13 November 2019, 12:12:41Quote from: Stan137 on Wed, 13 November 2019, 11:28:00Any ETA on the GB?He literally made a post 11hr ago saying more renders and date are coming. Use China time to your time, he's probably sleeping right now Sent from my SM-N960F using TapatalkSo... any ETA?YaSent from my SM-N960F using TapatalkYes
Guys, as I understand I will have to solder LEDs by myself, but does hot swappable PCB also allow LEDs ori will need to get solderable PCB to have ability to use LEDs? sorry for my english, not native..
Any indication on pricing for the regular version?Also, any ETA for the GB?
Updated:Sorry for the delay i have just sort the color voting :Show ImageAnodized color :Purple/grey/green Price : Start at $365 PC case : 50 units (we have been try many times cnc on pc case but the problem still there 1. Generally speak PC material was flexible when start cnc the case would be a little warped and hard to control the qualityespecially tkl top case .However,when you screw up you wont see the warpe2.About the tool marking on the bottom .i get feed back from E6.5 . It just a little case have it .you can see the marking clear but you cant fee it .pc and alu were same CNC process but when sandblasted the alu case tool marking will be recover but pc case cant .so we need do the pc bottom slow than alu to reduce marking appearance .but i cant promise make it perfect 3.For sure we want make the pc case quality better but for now we have limitations, so make sure when you purchase PC case care about those phenomenon or not . On the contrary,you can go for alu case since options always there .English not my native language, hope you can understand what i am typing here .Thanks everyone ,if you have any question pm me or touch me on discord .Bty,Prototypes were done ,photo will show next two days and group buy approaching .before open groupbuy i will announce here again
Quote from: JSaintS on Thu, 14 November 2019, 08:58:08Any indication on pricing for the regular version?Also, any ETA for the GB? Quote from: excluisve on Mon, 11 November 2019, 02:48:00Updated:Sorry for the delay i have just sort the color voting :Show ImageAnodized color :Purple/grey/green Price : Start at $365 PC case : 50 units (we have been try many times cnc on pc case but the problem still there 1. Generally speak PC material was flexible when start cnc the case would be a little warped and hard to control the qualityespecially tkl top case .However,when you screw up you wont see the warpe2.About the tool marking on the bottom .i get feed back from E6.5 . It just a little case have it .you can see the marking clear but you cant fee it .pc and alu were same CNC process but when sandblasted the alu case tool marking will be recover but pc case cant .so we need do the pc bottom slow than alu to reduce marking appearance .but i cant promise make it perfect 3.For sure we want make the pc case quality better but for now we have limitations, so make sure when you purchase PC case care about those phenomenon or not . On the contrary,you can go for alu case since options always there .English not my native language, hope you can understand what i am typing here .Thanks everyone ,if you have any question pm me or touch me on discord .Bty,Prototypes were done ,photo will show next two days and group buy approaching .before open groupbuy i will announce here again
Guys for the plate one of the options is sand brass eclear, is it ok if some vetrans can explain what that is? Is it just a brass plate? Also, what material plate will the coloured options be made out of?
Quote from: aodaliya1234 on Thu, 14 November 2019, 12:48:19Guys for the plate one of the options is sand brass eclear, is it ok if some vetrans can explain what that is? Is it just a brass plate? Also, what material plate will the coloured options be made out of?Brass plate with clear coat, and probably anodized aluSent from my SM-N960F using Tapatalk
Should I be worried about getting a brass plate and it oxidising in my keyboard after I build it?
Quote from: aodaliya1234 on Thu, 14 November 2019, 18:54:05Should I be worried about getting a brass plate and it oxidising in my keyboard after I build it?Brass plate should come PVD coated, oxidizing won’t be a concern.
Quote from: Sic_Alpha on Thu, 14 November 2019, 19:06:53Quote from: aodaliya1234 on Thu, 14 November 2019, 18:54:05Should I be worried about getting a brass plate and it oxidising in my keyboard after I build it?Brass plate should come PVD coated, oxidizing won’t be a concern.Now it seems get e clear not pvd coated .
Quote from: jacky on Thu, 14 November 2019, 21:04:02Quote from: Sic_Alpha on Thu, 14 November 2019, 19:06:53Quote from: aodaliya1234 on Thu, 14 November 2019, 18:54:05Should I be worried about getting a brass plate and it oxidising in my keyboard after I build it?Brass plate should come PVD coated, oxidizing won’t be a concern.Now it seems get e clear not pvd coated .regardless, oxidization shouldn't be an issuei can link the pics of my alice plate again if you don't wanna believe me on the importance of a real coating on the plate
Will there be a polycarbonate version?
Excited !! E whie +E pink match my Bento anyone have same combo ?
Quote from: Puddsy on Thu, 14 November 2019, 21:20:29Quote from: jacky on Thu, 14 November 2019, 21:04:02Quote from: Sic_Alpha on Thu, 14 November 2019, 19:06:53Quote from: aodaliya1234 on Thu, 14 November 2019, 18:54:05Should I be worried about getting a brass plate and it oxidising in my keyboard after I build it?Brass plate should come PVD coated, oxidizing won’t be a concern.Now it seems get e clear not pvd coated .regardless, oxidization shouldn't be an issuei can link the pics of my alice plate again if you don't wanna believe me on the importance of a real coating on the plateNa that's ok, I'll weigh the risks myself i guess. Would going for a pc plate change the acoustic by a lot tho?
Quote from: aodaliya1234 on Fri, 15 November 2019, 11:06:55Quote from: Puddsy on Thu, 14 November 2019, 21:20:29Quote from: jacky on Thu, 14 November 2019, 21:04:02Quote from: Sic_Alpha on Thu, 14 November 2019, 19:06:53Quote from: aodaliya1234 on Thu, 14 November 2019, 18:54:05Should I be worried about getting a brass plate and it oxidising in my keyboard after I build it?Brass plate should come PVD coated, oxidizing won’t be a concern.Now it seems get e clear not pvd coated .regardless, oxidization shouldn't be an issuei can link the pics of my alice plate again if you don't wanna believe me on the importance of a real coating on the plateNa that's ok, I'll weigh the risks myself i guess. Would going for a pc plate change the acoustic by a lot tho?a little yeah but if you want the brass sound, get brasstbh i think CF has the best sound and it sounds sort of like PC so do whatever you want basically
Protos are being made.
Hey could someone drop an invite to the discord please? Previous links aren't workingSent from my GM1917 using Tapatalk