Author Topic: [GB] LZ : PhysiX (Batch 1, Ship)  (Read 106734 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr_BeastQuake

  • Posts: 524
  • Location: Oregon
    • Reddit
Re: [GB] LZ : PhysiX GB [Order]
« Reply #50 on: Thu, 24 October 2019, 20:13:45 »
I may have missed the "rubber mount tech" explanation. Is there one?

Offline mrpetrov

  • Posts: 597
Re: [GB] LZ : PhysiX GB [Order]
« Reply #51 on: Thu, 24 October 2019, 20:41:42 »
What are the plate finishes like? Mirror polished, anodized like the case, or brushed? Any differences in finish between stainless steel and aluminum?

the surface of the weight plate is brushed.

Fantastic! I think a brushed finish is fabulous.

Offline eyedrop

  • Posts: 576
  • Location: Keeb Abyss
Re: [GB] LZ : PhysiX GB [Order]
« Reply #52 on: Thu, 24 October 2019, 20:49:57 »
What color?  Red or gray?

Offline bthezebra

  • Posts: 436
Re: [GB] LZ : PhysiX GB [Order]
« Reply #53 on: Thu, 24 October 2019, 21:00:42 »
Here we go

Offline Damage

  • Posts: 59
Re: [GB] LZ : PhysiX GB [Order]
« Reply #54 on: Thu, 24 October 2019, 21:05:27 »
What are the plate finishes like? Mirror polished, anodized like the case, or brushed? Any differences in finish between stainless steel and aluminum?

the surface of the weight plate is brushed.

Weight *and* plate?

Sorry, just not clear.

Offline Capsy

  • Posts: 275
Re: [GB] LZ : PhysiX GB [Order]
« Reply #55 on: Thu, 24 October 2019, 21:06:32 »
I may have missed the "rubber mount tech" explanation. Is there one?
It's in the OP. http://imgur.com/a/zxG1iSU

Offline ullr

  • Posts: 271
  • Location: Plant City, FL
Re: [GB] LZ : PhysiX GB [Order]
« Reply #56 on: Thu, 24 October 2019, 21:26:53 »
Just ballpark figure, what should I expect for shipping to the US with one basic kit and a wrist wrest?

Also this GB will probably sell several hundred units I'm guessing

Offline LifeZ

  • Thread Starter
  • Posts: 737
  • LifeZone
Re: [GB] LZ : PhysiX GB [Order]
« Reply #57 on: Thu, 24 October 2019, 21:34:32 »
Many orders will close the first order tomorrow???
Large quantities are difficult to control quality

 lol   :eek:

LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Offline LifeZ

  • Thread Starter
  • Posts: 737
  • LifeZone
Re: [GB] LZ : PhysiX GB [Order]
« Reply #58 on: Thu, 24 October 2019, 21:35:54 »
Just ballpark figure, what should I expect for shipping to the US with one basic kit and a wrist wrest?

Also this GB will probably sell several hundred units I'm guessing

EMS Shipping with tracking no~~~
LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Offline mrpetrov

  • Posts: 597
Re: [GB] LZ : PhysiX GB [Order]
« Reply #59 on: Thu, 24 October 2019, 21:41:24 »
Many orders will close the first order tomorrow???
Large quantities are difficult to control quality

 lol   :eek:

wow! how many orders will force you to close early??

Offline Slash Emperor

  • Posts: 453
  • Location: Boston, MA
  • Lust for life lost, keyboards acquired.
Re: [GB] LZ : PhysiX GB [Order]
« Reply #60 on: Thu, 24 October 2019, 21:54:52 »
Put in for black with carbon fiber plate and black wrist rest for the murdered out look, but heavily debating on switching the case to red after taking another look at the red LZ MPs...

Decisions, decisions.

Offline macclack

  • Posts: 403
  • Location: San Diego, CA
    • Macclack
Re: [GB] LZ : PhysiX GB [Order]
« Reply #61 on: Thu, 24 October 2019, 23:24:04 »
Welp, so much for “no keyboard purchases for the rest of the year.” This is too good to pass up. In for a black with carbon fiber plate. Finally found a home for my Modern Dolch set. Hiney PCB is  :thumb: :thumb:

Offline macclack

  • Posts: 403
  • Location: San Diego, CA
    • Macclack
Re: [GB] LZ : PhysiX GB [Order]
« Reply #62 on: Thu, 24 October 2019, 23:30:59 »
Many orders will close the first order tomorrow???
Large quantities are difficult to control quality

 lol   :eek:

wow! how many orders will force you to close early??

Eek hope I got in on time.
But for real, how could LZ not expect this to have “many orders” Lol

Offline Jubileus

  • Posts: 89
Re: [GB] LZ : PhysiX GB [Order]
« Reply #63 on: Thu, 24 October 2019, 23:35:28 »
I'm in! But I think I sent my order twice. How can I correct it LZ? Thanks
« Last Edit: Thu, 24 October 2019, 23:52:40 by Jubileus »

Offline steezkeez

  • Posts: 196
Re: [GB] LZ : PhysiX GB [Order]
« Reply #64 on: Fri, 25 October 2019, 00:37:25 »
Figured this is my only opportunity to get an LZ board so I went in on Red/CF. Hopefully I made the cutoff!

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11555
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] LZ : PhysiX GB [Order]
« Reply #65 on: Fri, 25 October 2019, 00:38:46 »
Just ballpark figure, what should I expect for shipping to the US with one basic kit and a wrist wrest?

Also this GB will probably sell several hundred units I'm guessing

LZ typically caps at around 70, since he's pretty serious with QC. Wouldn't be surprised to see it go up to 100, but even that's a stretch.
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice (lost in mail T_T) | Revo One | z

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u) | "Puddsy is the puddsy of keebs" -ns90

Offline orangesoh

  • Posts: 13
Re: [GB] LZ : PhysiX GB [Order]
« Reply #66 on: Fri, 25 October 2019, 01:20:18 »
Just ordered. I got in with Red/ CF too.

Offline PotatoTM

  • Posts: 308
  • Location: ON, Canada
  • ...
Re: [GB] LZ : PhysiX GB [Order]
« Reply #67 on: Fri, 25 October 2019, 01:26:30 »
Ended up getting in on this, it's going to be an expensive end of the year! GLWGB!

Offline dantambok

  • Posts: 878
  • Location: Philippines
Re: [GB] LZ : PhysiX GB [Order]
« Reply #68 on: Fri, 25 October 2019, 01:51:16 »
Let’s gooooo
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / UTD 360C / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 /

Coming soon --  Modern M0110 / PC HBCP / Noxary 280S / Noxary XRF / LZ PhysiX / 2x Keycult 1/60 rev1 / Lynx50 / 2x Matrix 2.0 ADD / 2x GSKT-00 / FLX Virgo / Noxary Vulcan Pro


Offline xIHA

  • Posts: 11
  • Location: Singapore, Singapore, Singapore
Re: [GB] LZ : PhysiX GB [Order]
« Reply #69 on: Fri, 25 October 2019, 04:32:58 »
In for a black and PC so hyped
OTD 456gt | xIHEx (One off comission) | Duck kingsaver | G80-1838HPU

Offline fabryrock

  • Posts: 26
  • Location: Pizza, Pasta and Mafia
Re: [GB] LZ : PhysiX GB [Order]
« Reply #70 on: Fri, 25 October 2019, 04:53:32 »
Any pic of the weight at all? Time is running out and since it is not a cheap board i would like to see the whole "package" thanks

Offline Khers

  • Posts: 503
  • Schrödinger's box
Re: [GB] LZ : PhysiX GB [Order]
« Reply #71 on: Fri, 25 October 2019, 06:03:25 »
Any pic of the weight at all? Time is running out and since it is not a cheap board i would like to see the whole "package" thanks

The weight is internal, brushed stainless and visible in the assembly album, from which I got this:


Offline fabryrock

  • Posts: 26
  • Location: Pizza, Pasta and Mafia
Re: [GB] LZ : PhysiX GB [Order]
« Reply #72 on: Fri, 25 October 2019, 06:57:47 »
Any pic of the weight at all? Time is running out and since it is not a cheap board i would like to see the whole "package" thanks

The weight is internal, brushed stainless and visible in the assembly album, from which I got this:

Show Image


Ok i got It now thanks even t'ho i would like to see actual renders of the Weight itself. But im telling myself what Is the point of an internal Wright if It Is not visible cause It Is not right?

Offline kturnbull

  • Posts: 51
  • Location: 93021
Re: [GB] LZ : PhysiX GB [Order]
« Reply #73 on: Fri, 25 October 2019, 06:59:45 »
Ok i got It now thanks even t'ho i would like to see actual renders of the Weight itself. But im telling myself what Is the point of an internal Wright if It Is not visible cause It Is not right?

And here I'm hoping the weight brings this puppy to 'possibly heavier overall than LZ's ergo' ... =)

Offline Mr.Elli0t

  • Posts: 89
Re: [GB] LZ : PhysiX GB [Order]
« Reply #74 on: Fri, 25 October 2019, 07:39:59 »
Are the stabs screw in or snap in?

Offline ARSLOCK

  • Posts: 132
    • ARSLOCK
Re: [GB] LZ : PhysiX GB [Order]
« Reply #75 on: Fri, 25 October 2019, 08:12:54 »
Looks like the form is closed now, how many orders?

Offline LifeZ

  • Thread Starter
  • Posts: 737
  • LifeZone
Re: [GB] LZ : PhysiX GB [Order]
« Reply #76 on: Fri, 25 October 2019, 08:48:35 »
Are the stabs screw in or snap in?
Cherry original Stabz
Snap in.
LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Offline keebweeb

  • Posts: 27
Re: [GB] LZ : PhysiX GB [Order]
« Reply #77 on: Fri, 25 October 2019, 08:50:56 »
Good looking board! It's nice to see more high end ergo boards being made.

Offline LifeZ

  • Thread Starter
  • Posts: 737
  • LifeZone
Re: [GB] LZ : PhysiX GB [Order]
« Reply #78 on: Fri, 25 October 2019, 08:51:44 »
****************************
We close the order with a lot of unexpected quantity.
please understand. If a cancellation quantity occurs after your last payment, we will open additional orders.
Thank you for your participation.
LZ Limited
http://lzlife.tistory.com

LZ USB Cable (Mini b 5pin)
http://lzlife.tistory.com/407

Offline Mr.Elli0t

  • Posts: 89
Re: [GB] LZ : PhysiX GB [Order]
« Reply #79 on: Fri, 25 October 2019, 09:08:52 »
Are the stabs screw in or snap in?
Cherry original Stabz
Snap in.
Will I be able to put screw in stabs?

Sent from my Pixel 4 XL using Tapatalk


Offline swerderv

  • Posts: 11
Re: [GB] LZ : PhysiX GB [Order]
« Reply #80 on: Fri, 25 October 2019, 09:10:52 »
Hopefully I made it. Didn’t join until a few hours ago.

Offline wholypantalones

  • Posts: 799
  • Location: The Mitten
Re: [GB] LZ : PhysiX GB [Order]
« Reply #81 on: Fri, 25 October 2019, 09:17:42 »
Are the stabs screw in or snap in?
Cherry original Stabz
Snap in.
Will I be able to put screw in stabs?

Sent from my Pixel 4 XL using Tapatalk

They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.

Offline Mr.Elli0t

  • Posts: 89
Re: [GB] LZ : PhysiX GB [Order]
« Reply #82 on: Fri, 25 October 2019, 09:21:36 »
Are the stabs screw in or snap in?
Cherry original Stabz
Snap in.
Will I be able to put screw in stabs?

Sent from my Pixel 4 XL using Tapatalk

They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.
Thanks! I figured as much, but wasn't sure because all I've ever used is screw in, is there any noticable difference between the two other than the way they are held on to the PCB?

Sent from my Pixel 4 XL using Tapatalk


Offline kturnbull

  • Posts: 51
  • Location: 93021
Re: [GB] LZ : PhysiX GB [Order]
« Reply #83 on: Fri, 25 October 2019, 09:22:18 »
They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.

I wish there were stabs that were both 'screw in' ... and didn't have the possibility of the bars coming loose. A non 'clip in' bar or something.

Offline wholypantalones

  • Posts: 799
  • Location: The Mitten
Re: [GB] LZ : PhysiX GB [Order]
« Reply #84 on: Fri, 25 October 2019, 09:28:04 »
They attach the same way to the pcb as clip style except the clips are replaced with screws, so yeah.

I wish there were stabs that were both 'screw in' ... and didn't have the possibility of the bars coming loose. A non 'clip in' bar or something.

Jam some toothpicks in the clips, they won't move.

Offline kturnbull

  • Posts: 51
  • Location: 93021
Re: [GB] LZ : PhysiX GB [Order]
« Reply #85 on: Fri, 25 October 2019, 09:31:07 »
Jam some toothpicks in the clips, they won't move.

?? I mean where the bars clip in... Don't think there's enough room for toothpicks in that little plastic space? (not the clips to the PCB)

Offline Steezus

  • Keeper of Facts
  • * Elevated Elder
  • Posts: 2497
Re: [GB] LZ : PhysiX GB [Order]
« Reply #86 on: Fri, 25 October 2019, 09:37:43 »
Jam some toothpicks in the clips, they won't move.

?? I mean where the bars clip in... Don't think there's enough room for toothpicks in that little plastic space? (not the clips to the PCB)

Not where the bar clips into the stabilizer. It's a common stab mod where you jam the toothpick in from the bottom side into the part of the stab that clips into the PCB. This prevents the clip from contracting and popping out of the hole in the PCB.
« Last Edit: Fri, 25 October 2019, 09:43:54 by Steezus »
TGR-Jane CE | TGR-Tris CE | Lyn Montage | LZ PhysiX | Exclusive e8.5

Offline wholypantalones

  • Posts: 799
  • Location: The Mitten
Re: [GB] LZ : PhysiX GB [Order]
« Reply #87 on: Fri, 25 October 2019, 09:45:44 »
Jam some toothpicks in the clips, they won't move.

?? I mean where the bars clip in... Don't think there's enough room for toothpicks in that little plastic space? (not the clips to the PCB)

Sorry, I read that incorrectly. I meant where they clip in to the pcb.

If you put the lube under the bar, on the clip housing instead of where the bar clips in, the bar doesn't come unclipped so easily.

See my ****ty insta post about it.

https://www.instagram.com/p/B0rYStwn0Am/?igshid=17s2olip3n9as

Offline kturnbull

  • Posts: 51
  • Location: 93021
Re: [GB] LZ : PhysiX GB [Order]
« Reply #88 on: Fri, 25 October 2019, 09:54:53 »

Sorry, I read that incorrectly. I meant where they clip in to the pcb.

If you put the lube under the bar, on the clip housing instead of where the bar clips in, the bar doesn't come unclipped so easily.

See my ****ty insta post about it.

https://www.instagram.com/p/B0rYStwn0Am/?igshid=17s2olip3n9as

Ahh... Thankee =) I'll try that.

Offline Wongstongs

  • Posts: 147
Re: [GB] LZ : PhysiX GB [Order]
« Reply #89 on: Fri, 25 October 2019, 10:44:16 »
TFW you were super busy yesterday but the GB was unlimited so it was all cool and you could fill out the form the next day but it really wasn't and now the form is closed   :-[

Offline eugenez90

  • Posts: 8
  • Location: Singapore
Re: [GB] LZ : PhysiX GB [Order]
« Reply #90 on: Fri, 25 October 2019, 10:50:40 »
Damm, how many orders did you receive before closing?

Offline Mr.Elli0t

  • Posts: 89
Re: [GB] LZ : PhysiX GB [Order]
« Reply #91 on: Fri, 25 October 2019, 10:51:20 »
Damm, how many orders did you receive before closing?
Great question! I was wondering the same thing

Sent from my Pixel 4 XL using Tapatalk


Offline Remsky

  • Posts: 299
  • Location: Portland, OR
  • Lubed switch count > Puddsy post count
Re: [GB] LZ : PhysiX GB [Order]
« Reply #92 on: Fri, 25 October 2019, 10:53:46 »
I wonder what the color spread was like between orders.
Jane v2 - GSKT00 - Jane CE V2(coming) - Poly alice (coming) - LZ Physix - Matrix 8XV 2.0 - KEI (coming)

Offline eyedrop

  • Posts: 576
  • Location: Keeb Abyss
Re: [GB] LZ : PhysiX GB [Order]
« Reply #93 on: Fri, 25 October 2019, 10:58:27 »
So this is a done deal then?

Sent from my Pixel 3 using Tapatalk


Offline lirtle

  • Posts: 9
Re: [GB] LZ : PhysiX GB [Order]
« Reply #94 on: Fri, 25 October 2019, 15:18:07 »
Are orders going to reopen or did I miss the boat completely?

Offline NoxNoxNox

  • Posts: 59
Re: [GB] LZ : PhysiX GB [Order]
« Reply #95 on: Fri, 25 October 2019, 15:19:14 »
Darn, I had the form open this morning but didn't finish filling it out before work, came home and its closed.  Guess I shouldn't have debated on color and just gone with black.  Oh well. 

Offline whyamihere

  • Posts: 30
Re: [GB] LZ : PhysiX GB [Order]
« Reply #96 on: Fri, 25 October 2019, 15:31:57 »
:O excited for this

Offline Damage

  • Posts: 59
Re: [GB] LZ : PhysiX GB [Order]
« Reply #97 on: Fri, 25 October 2019, 19:41:39 »
Anyone get an invoice yet?

Offline ProlificPanda

  • Posts: 21
Re: [GB] LZ : PhysiX GB [Order]
« Reply #98 on: Fri, 25 October 2019, 19:49:06 »
Ooof, figured I would fill it out today, didn't think it would already be closed.

Offline N0GLUT0N

  • Posts: 72
Re: [GB] LZ : PhysiX GB [Order]
« Reply #99 on: Fri, 25 October 2019, 20:18:45 »
nooo the form is closed :(