Author Topic: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]  (Read 20500 times)

0 Members and 2 Guests are viewing this topic.

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Hi friends, welcome to the Interest Check for the next keyboard in the HEX series, the HEX.6C.
The 6C is our attempt at filling a very distinct void in the custom community, the full-size layout.
=====>IC Form<=====
=====>SMALL POLL FOR KNOB POSITION<=====


241533-0


When we were conceptualizing our next product after we ran 3C, we decided to provide the community with something that had been missing for quite a while, A Custom full-size Keyboard.
As you can see, the renders are of a southpaw full-size, as I personally feel that it is the most convenient full-size should the user put in the effort to get used to the left handed numpad,
but we're also thinking of just doing the traditional full-size layout. Do help us solve this dilemma by filling in the IC form :)


241968-1

There had been some custom full-sizes in the past. However, the prices and the limited quantities available meant that there wasn't really a widely available
custom full-size solution in the market. This is the reason we decided to bring this layout and design to the IC stage instead of more popular(as of recent times) 65% or TKL layouts.
However we're still evaluating interest in this board and we might end up bringing something else into IC if this doesn't do as well as we want it to.


241539-2


Our plate mounting this time is a little different compared to the one we had in the 3C, where we just isolated each mounting point. Since we're going with a more "traditional" gasket-type mount, we opted to fully gasket mount our plate with a giant rubber band completely wrapping the plate. Ensuring that the plate will be COMPLETELY isolated from the top and bottom case, making zero contact with metal during usage.
As for the material for the gasket, we're thinking either silicone or poron as of now.

241222-3 241224-4



We're thinking of offering Brass Knobs as
The default aluminum knob will be anodized to match your case colour. of choice.

241535-5 241537-6



As for plates we're looking at offering two layout options: Southpaw Standard and Southpaw Mirrored

241631-7 241633-8


Alright so lets talk specs:
  • Aluminum Case
  • WK, WKL layouts available
  • Gasket mount
  • 6.9 degree typing angle
  • PCB included, USB C
  • 3 colours available: Black, E-White, TBD(Fill up the IC form)
  • Plate materials available: Brass, Aluminum, Polypropylene
  • Knob materials available: Alu(default), Brass.
  • MOQ: 200units~ish or more

Price: 250-300USD for the base kit

Feel free to join our Discord Server and
check out our Instagram for more updates!


Renders: tm
GMK Azure
241448-9 241450-10
Renders by Kingk22

GMK Masterpiece(GB Live!)
241721-11

Design updates:
  • Added mirrored numpad support
  • Added knob support

Legacy images/renders
241216-12 241220-13
« Last Edit: Tue, 16 June 2020, 09:33:06 by Kasterborous »

Offline sirieous

  • Posts: 81
  • help
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #1 on: Fri, 01 May 2020, 08:38:39 »
A lot of friends that i drag into the hobby want a fullsize for work. This is now the go to recommendation for me. Goodluck with everything :D

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #2 on: Fri, 01 May 2020, 08:40:23 »
A lot of friends that i drag into the hobby want a fullsize for work. This is now the go to recommendation for me. Goodluck with everything :D
Thanks man, that was my intention when we conceptualized this as well :)

Offline Dovan1405

  • Posts: 57
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #3 on: Fri, 01 May 2020, 08:40:39 »
nice

Online Rob27shred

  • Posts: 1003
  • Location: Pittsburgh, PA
  • insane in the membrane
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #4 on: Fri, 01 May 2020, 08:46:27 »
If you can keep it close to the estimated pricing, count me in! I'm not a huge fan of full sized boards, but the fact full size customs are so few & far between + this being southpaw sells me on it. GL with this guys!

Offline gt1989

  • Posts: 173
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #5 on: Fri, 01 May 2020, 08:47:34 »
This looks really great, definitely a great work keyboard.

Offline ephemeral25

  • Posts: 24
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #6 on: Fri, 01 May 2020, 08:52:06 »
100% in for a left numpad.

If Polycarb version is made I hope I can put my hand on it.

Realy great work, simple aesthetics. On the quality side I will see it with my Hec3C.

You have all my support!

Offline //gainsborough

  • Posts: 172
  • Location: Oregon
  • ALPSの日常
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #7 on: Fri, 01 May 2020, 08:56:02 »
Filled out form!  Would you consider a WKL top?

Offline flying1911

  • Posts: 140
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #8 on: Fri, 01 May 2020, 08:57:52 »
Here's what I think:
- Southpaw numpad is a must for me (I'm left-handed and have been craving something like this for a long time)
- F13 seems a bit unnecessary to me. It makes the first row look too busy
- Please consider a winkeyless option
TGR 910 CE | TGR Jane CE | TGR Jane V2 | TGR Jane V2 CE | Keycult OG No.1 WKL | Cherry G81-3100 SAV | IBM Model M SSK

Offline productkun

  • Posts: 38
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #9 on: Fri, 01 May 2020, 08:58:50 »
Interested because southpaw, looks great!

Offline crappyfella

  • Posts: 5
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #10 on: Fri, 01 May 2020, 08:59:42 »
NICE time to find space on my table for this
VE.A | UTD 360C |Tiamo V2 | Iron 165 | TX84v2 | S7 elephant

J02 | Hex.3C | 350mimi

Offline jumpmineralwater

  • Posts: 45
    • jumpmineralwater IG
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #11 on: Fri, 01 May 2020, 09:02:34 »
Filled in the IC form
- Please consider adding an option for a WKL bottom row

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #12 on: Fri, 01 May 2020, 09:21:45 »
Filled in the IC form
- Please consider adding an option for a WKL bottom row

Here's what I think:
- Southpaw numpad is a must for me (I'm left-handed and have been craving something like this for a long time)
- F13 seems a bit unnecessary to me. It makes the first row look too busy
- Please consider a winkeyless option

WKL added, I might have forgetten to add that detail in there
I'll discuss with my partner regarding the F13 key

Offline pngu

  • Posts: 85
  • Location: Germany
  • send noots
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #13 on: Fri, 01 May 2020, 09:23:22 »
A lot of friends that i drag into the hobby want a fullsize for work. This is now the go to recommendation for me. Goodluck with everything :D

Exactly. Also, my coworker insists on RGB :D Is that something you'd consider?

Offline stoffelduss

  • Posts: 167
  • Location: Örebro, Sweden
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #14 on: Fri, 01 May 2020, 09:27:12 »
Not my size but maybe I'm going to build one for my friend, so I'm interested! I can't understand how you can find the F13 key "unnecessary", I mean... it's a full-size? It has a ton of unnecessary keys? I think it looks much better with the F13, personally.

Offline mbsurfer

  • Posts: 99
  • Location: South Carolina, USA
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #15 on: Fri, 01 May 2020, 09:29:07 »
If WKL is supported, then I'm definitely interested

Offline flying1911

  • Posts: 140
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #16 on: Fri, 01 May 2020, 09:31:56 »
Another thing, I have some Cherry OG keysets that I use with 84-key boards, so that means the numpad caps never see the light of day. Being able to put the WHOLE OG keyset into use in a southpaw form factor is what dreams are made of <3
TGR 910 CE | TGR Jane CE | TGR Jane V2 | TGR Jane V2 CE | Keycult OG No.1 WKL | Cherry G81-3100 SAV | IBM Model M SSK

Offline E.E.L. Ambiense

  • Posts: 83
  • Location: Brevard Cty, FL
  • Acrylic Heretic
    • E.E.L. Ambiense Industries
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #17 on: Fri, 01 May 2020, 09:32:39 »
Southpaw offered I'm totally in.  Thanks for offering this!
Case modder by trade; mech-deck'r for fun!

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #18 on: Fri, 01 May 2020, 09:33:40 »
A lot of friends that i drag into the hobby want a fullsize for work. This is now the go to recommendation for me. Goodluck with everything :D

Exactly. Also, my coworker insists on RGB :D Is that something you'd consider?

We're still actively designing the PCB. If its something we can do at a good enough price point, I don't see the downsides of it :)

Offline huey

  • Posts: 42
  • Location: UK
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #19 on: Fri, 01 May 2020, 09:43:24 »
Just spitballing an idea, but if you separate the plate for the numpad from the rest, you can achieve a "southpaw" numpad and "normal" numpad just by flipping that plate over (PCB might be a bit swiss). I would also like to see options for 1us where 2us exist on the numpad.

Other than that, it's a welcome option that really isn't paid any attention too. And that price tag looks good, but I hesitant that it might be un-achievable.

6.9 degree typing angle

nice


Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #20 on: Fri, 01 May 2020, 09:50:55 »
Just spitballing an idea, but if you separate the plate for the numpad from the rest, you can achieve a "southpaw" numpad and "normal" numpad just by flipping that plate over (PCB might be a bit swiss). I would also like to see options for 1us where 2us exist on the numpad.

Other than that, it's a welcome option that really isn't paid any attention too. And that price tag looks good, but I hesitant that it might be un-achievable.

6.9 degree typing angle

nice

That's a pretty interesting take on the numpad plate. I'll definitely take it into consideration and think about how to make sure that doesn't affect anything in the board. It could open up the possibility of us offering both left and right sided top pieces and pcbs.

As for the 1u where 2u's are, we'll implement that when we design the PCB.

Offline greentea

  • Posts: 6
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #21 on: Fri, 01 May 2020, 10:31:07 »
Nice typing angle

Offline equalunique

  • Posts: 520
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #22 on: Fri, 01 May 2020, 10:44:04 »
This is perfect. Glad to see the F13 spot because I have a perfect artisan for it. Need that fullsize keeb in aluminium with left numpad/southpaw. Gonna use for waifu's build.

Offline Microdoted

  • Posts: 4
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #23 on: Fri, 01 May 2020, 10:57:54 »
full size keyboard - sign me up. while i fully support the southpaws (they are rare)... please dont neglect us standard 104/108 layout guys. down for at least a couple when you build them

Offline drfranco

  • Posts: 7
  • Location: California
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #24 on: Fri, 01 May 2020, 11:20:27 »
Definitely interested in this full size as I need that for work. Southpaw is intriguing. I'm willing to give it a shot.

Offline tul

  • Posts: 10
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #25 on: Fri, 01 May 2020, 11:33:39 »
Will the PCB run QMK?

Offline yuki

  • Posts: 11
  • sleep is for the weak
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #26 on: Fri, 01 May 2020, 11:46:08 »
IMO Silicon and nitrile are the only relevant proper gasket options. I would ignore poron completely if I were you. Plate design looks pretty good for a change, if there were a fixed tsangan plate would be even more epic.. GLWIC!

Offline IMZO

  • Posts: 26
  • Location: Canada
  • Golden Rule
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #27 on: Fri, 01 May 2020, 12:12:47 »
this is pretty interesting.. hmm nice

Offline The Equals D

  • Posts: 36
  • Location: Texas
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #28 on: Fri, 01 May 2020, 12:14:06 »
I need this. Please make it happen lol. Loved it since I saw the first render in yalls discord. The price is incredible too

Offline NoxNoxNox

  • Posts: 57
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #29 on: Fri, 01 May 2020, 12:16:51 »
Oh I like this.  Big fan of the layout for people who still want numpads.

Offline monojira

  • Posts: 6
  • Location: GER
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #30 on: Fri, 01 May 2020, 12:50:58 »
Southpaw fullsize for work. I'm so sold on it.  :thumb:

Offline Jaltr

  • Posts: 152
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #31 on: Fri, 01 May 2020, 13:08:30 »
I'm in!

Sent from my SM-J415G using Tapatalk


Offline steezkeez

  • Posts: 188
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #32 on: Fri, 01 May 2020, 13:14:07 »
Interested (especially if WKL is an option)!

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #33 on: Fri, 01 May 2020, 13:23:03 »
Interested (especially if WKL is an option)!
Yes! WKL will be an option!

Will the PCB run QMK?
Yes definitely. I would like to have it ported to VIA as well if possible :)

IMO Silicon and nitrile are the only relevant proper gasket options. I would ignore poron completely if I were you. Plate design looks pretty good for a change, if there were a fixed tsangan plate would be even more epic.. GLWIC!
Point taken! I'll definitely be looking forward to the prototype.
As for the fixed plate, it's highly unlikely that we offer that this round.

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1496
  • Location: 白い帽子
  • greyhat co-leader
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #34 on: Fri, 01 May 2020, 13:58:04 »
Sweet board, always cool seeing custom tenkey boards :cool:


Keyboards: GON NS NerD Crystal TKL & OTD 356CL Dark Greyhat Edition, baybee!

Offline crusader_alex

  • Posts: 123
  • Location: Greece
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #35 on: Fri, 01 May 2020, 14:29:08 »
Lovely design, definitely in for one!

Sent from my HD1913 using Tapatalk


Offline ecbob

  • Posts: 50
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #36 on: Fri, 01 May 2020, 14:36:31 »
f13 seems too busy

Offline Inner-Ear

  • Posts: 24
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #37 on: Fri, 01 May 2020, 14:42:10 »
Mirror the layout of the numpad so the 2U keys are on the left side and I’m in

Offline huey

  • Posts: 42
  • Location: UK
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #38 on: Fri, 01 May 2020, 16:27:55 »
Just spitballing an idea, but if you separate the plate for the numpad from the rest, you can achieve a "southpaw" numpad and "normal" numpad just by flipping that plate over (PCB might be a bit swiss). I would also like to see options for 1us where 2us exist on the numpad.

Other than that, it's a welcome option that really isn't paid any attention too. And that price tag looks good, but I hesitant that it might be un-achievable.

6.9 degree typing angle

nice

That's a pretty interesting take on the numpad plate. I'll definitely take it into consideration and think about how to make sure that doesn't affect anything in the board. It could open up the possibility of us offering both left and right sided top pieces and pcbs.

As for the 1u where 2u's are, we'll implement that when we design the PCB.

If you ever want to chat about it let me know, It's something I've been looking at for and have done a tentative design with that in mind already.

Offline Jaltr

  • Posts: 152
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #39 on: Fri, 01 May 2020, 17:09:59 »
With another southpaw board coming out, I hope this can be a traditional numpad styled board!

Offline kaisn

  • Posts: 60
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #40 on: Fri, 01 May 2020, 17:16:48 »
love it but would prefer traditional numpad too

Offline foxtrap614

  • Posts: 22
  • Always rem
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #41 on: Fri, 01 May 2020, 17:40:13 »
Nice I am interested.
"I don't think -- " "Then you shouldn't talk."
-Alice In Wonderland
 

Offline jorj_mk

  • Posts: 84
  • Location: UK
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #42 on: Fri, 01 May 2020, 17:48:08 »
IMO F13 makes it look too busy and isn't really needed on a fullsize board.

If you can keep it close to your estimated price, I'm definitely interested!
idb60 | ibm m122 | g80-5000haagb | g80-5700haaus | g80-1000hau | starman tkl | gskt00 (waiting)

Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #43 on: Fri, 01 May 2020, 19:41:33 »
As an ‘either way’ sorta guy about F13 seems like it should be a poll.

What if the pcb supported mirrored numpad but the plate didn’t, plate files were made available, the mirrored folks can get their own, and those of us who are the sort to want a spare plate get them from the mirror preference folks who don’t want the stock one? SP-111 did that w the numpad...

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #44 on: Fri, 01 May 2020, 22:48:39 »
Just spitballing an idea, but if you separate the plate for the numpad from the rest, you can achieve a "southpaw" numpad and "normal" numpad just by flipping that plate over (PCB might be a bit swiss). I would also like to see options for 1us where 2us exist on the numpad.

Other than that, it's a welcome option that really isn't paid any attention too. And that price tag looks good, but I hesitant that it might be un-achievable.

6.9 degree typing angle

nice

That's a pretty interesting take on the numpad plate. I'll definitely take it into consideration and think about how to make sure that doesn't affect anything in the board. It could open up the possibility of us offering both left and right sided top pieces and pcbs.

As for the 1u where 2u's are, we'll implement that when we design the PCB.

If you ever want to chat about it let me know, It's something I've been looking at for and have done a tentative design with that in mind already.

sure! DM me on Discord!

Offline vi0till

  • Posts: 115
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #45 on: Fri, 01 May 2020, 22:51:43 »
love it but would prefer traditional numpad too
+1  Hope you can offer this variant as well.

Sent from my VOG-L29 using Tapatalk


Offline thornkin

  • Posts: 220
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #46 on: Fri, 01 May 2020, 23:46:45 »
Fun to see a full size board. And the price is great! Hopefully you can keep it close to that.

For me, traditional numpad is a must. No interest in a southpaw personally.

I like f13, please keep it.

Carbon fiber plate?

Offline drfranco

  • Posts: 7
  • Location: California
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #47 on: Sat, 02 May 2020, 01:00:46 »
Not that familiar with gasket mount. Could it support hot swap?

Offline xEP

  • Posts: 5
  • Location: DC, USA
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #48 on: Sat, 02 May 2020, 02:12:32 »
I'm waiting.

Offline mode

  • Posts: 262
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #49 on: Sat, 02 May 2020, 07:28:17 »
Interested on behalf of a friend who's wanted a fullsize custom for a while, will prolly build it for him if this happens.

Hoping for non-southpaw options though.

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #50 on: Sat, 02 May 2020, 13:33:00 »
We've added mirrored numpad and knob support!

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #51 on: Sat, 02 May 2020, 13:49:36 »
I'm waiting.

same

Fun to see a full size board. And the price is great! Hopefully you can keep it close to that.

For me, traditional numpad is a must. No interest in a southpaw personally.

I like f13, please keep it.

Carbon fiber plate?

No promises regarding CF plate but the plate files will be released post-gb so feel free to cut your own.

Interested on behalf of a friend who's wanted a fullsize custom for a while, will prolly build it for him if this happens.

Hoping for non-southpaw options though.
Hahah we've all got that one friend who really must have THAT numpad eh?
Based off community feedback it seems that for now this will be run in the southpaw variant

Not that familiar with gasket mount. Could it support hot swap?
It could but there might be issues. I still recommend soldering your switches as you'll have a more solid-feeling keyboard.


Offline Inner-Ear

  • Posts: 24
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #52 on: Sun, 03 May 2020, 10:34:07 »
We've added mirrored numpad and knob support!

I really appreciate this!

Renders look really nice.

Offline abstractkb

  • Posts: 25
    • Abstract Keyboards Homepage
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #53 on: Sun, 03 May 2020, 14:34:25 »
This looks really nice and would be super cool at the estimated price point.  I don't really need another board right now but this one might be enough to convince me.

Offline Hell-es

  • Posts: 271
  • Location: Bavaria
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #54 on: Sun, 03 May 2020, 14:39:51 »
Interessted, as left handed - vote for traditional  :thumb:

Offline yrneh

  • Posts: 20
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #55 on: Sun, 03 May 2020, 14:41:22 »
With added knob support, will this mean there will be a version w/o knob?

Offline Jaltr

  • Posts: 152
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #56 on: Sun, 03 May 2020, 14:47:43 »
With added knob support, will this mean there will be a version w/o knob?
You'll just use a regular key instead, I'm guessing.

Sent from my SM-J415G using Tapatalk

Offline Jippadox

  • Posts: 5
  • Location: Sweden
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #57 on: Sun, 03 May 2020, 14:56:46 »
Really love to see a fullsize, and with southpaw numpad! How fantastic!  ;D
Would consider this as recommendation for a friend, and that means iso support would be greatly appreciated.
Looks great, good job!

Offline yrneh

  • Posts: 20
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #58 on: Sun, 03 May 2020, 15:12:11 »
With added knob support, will this mean there will be a version w/o knob?
You'll just use a regular key instead, I'm guessing.

Sent from my SM-J415G using Tapatalk

The way the renders are makes it seem like there is a designated cutout for the knob.

Offline Jaltr

  • Posts: 152
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #59 on: Sun, 03 May 2020, 17:31:07 »
With added knob support, will this mean there will be a version w/o knob?
You'll just use a regular key instead, I'm guessing.

Sent from my SM-J415G using Tapatalk

The way the renders are makes it seem like there is a designated cutout for the knob.
I guess it depends on the knob radius, but the pcb can support both a switch and an encoder, so don't worry about it too much.

Sent from my SM-J415G using Tapatalk


Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #60 on: Mon, 04 May 2020, 08:35:11 »
With added knob support, will this mean there will be a version w/o knob?
You'll just use a regular key instead, I'm guessing.

Sent from my SM-J415G using Tapatalk

The way the renders are makes it seem like there is a designated cutout for the knob.

yes its a designated knob, don't think there will be compat for a switch there instead

Offline Jaltr

  • Posts: 152
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #61 on: Mon, 04 May 2020, 08:37:21 »
Oh, gotcha. Knobs are fine by me, just want trading numpad in the end of the day Haha.

Sent from my SM-J415G using Tapatalk


Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize
« Reply #62 on: Mon, 04 May 2020, 08:59:25 »
Oh, gotcha. Knobs are fine by me, just want trading numpad in the end of the day Haha.

Sent from my SM-J415G using Tapatalk

Just updated the renders and added a small knobs section to hopefully prevent anymore confusion due to my poor wording  :thumb:

Offline Jaltr

  • Posts: 152
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #63 on: Mon, 04 May 2020, 09:10:25 »
Oh, gotcha. Knobs are fine by me, just want trading numpad in the end of the day Haha.

Sent from my SM-J415G using Tapatalk

Just updated the renders and added a small knobs section to hopefully prevent anymore confusion due to my poor wording  :thumb:
I appreciate that!

Sent from my SM-J415G using Tapatalk


Offline E.E.L. Ambiense

  • Posts: 83
  • Location: Brevard Cty, FL
  • Acrylic Heretic
    • E.E.L. Ambiense Industries
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #64 on: Mon, 04 May 2020, 09:39:59 »
For those of us that do our own coating, it would even more cool if we could get a raw off-the-mill version that hasn't been coated/anodized.  Can't wait either way!
Case modder by trade; mech-deck'r for fun!

Offline Antvn84

  • Posts: 4
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #65 on: Mon, 04 May 2020, 11:31:52 »
If running, I definitely go with  :thumb:

Offline Aevyn

  • Posts: 55
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #66 on: Mon, 04 May 2020, 12:36:32 »
Price is amazing. Southpaw is also +++. Would definitely be in for a polycarb version and PP plate.

Offline noorejji

  • Posts: 130
  • Location: yurop
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #67 on: Mon, 04 May 2020, 21:03:57 »
Price: 250-300USD for the base kit
How?

Offline J_Noes

  • Posts: 9
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #68 on: Mon, 04 May 2020, 21:32:07 »
I'm hoping no knob is an option. And if all versions absolutely have to come with a knob, I think a better position for it would be the first key on the top left so you can rest your handle on the table while turning the knob. in it's current position you'd have to keep your hand and arm floating above the keyboard the whole time.

apart from the position of the knob, I love everything else about it.

Offline yrneh

  • Posts: 20
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #69 on: Mon, 04 May 2020, 21:40:25 »
I'm hoping no knob is an option. And if all versions absolutely have to come with a knob, I think a better position for it would be the first key on the top left so you can rest your handle on the table while turning the knob. in it's current position you'd have to keep your hand and arm floating above the keyboard the whole time.

apart from the position of the knob, I love everything else about it.
Agreed, if the knob is going to be a fixed option it should be in a better spot. It's awkward to have it in the current place. Your hand would be on top of the numpad and other keys.

Offline Mytherium

  • Posts: 1
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #70 on: Mon, 04 May 2020, 23:25:48 »
I'm excited for this to become available, but I have a question about the pcb and some of the features I'd like to see kept in the design.

This is probably an unpopular feature, but are there any plans to support LED lighting for each key and also fro things like Caps Lock, Scroll Lock and Num Lock?

Knob -  I'd prefer if there was an option for no knob/dial. I'd like to see the 4 extra keys on top of the numpad so maybe they could be used for media keys or reprogrammed for other uses.

F13 key -  I support the inclusion of this, though I'm curious what people will use it for in maybe executing macros or something.

I'm new to the custom keyboard scene and I really love the southpaw numpad design you've made. I also support the option for an inverted numpad :)

Offline asciisii

  • Posts: 21
  • Location: Canada
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #71 on: Tue, 05 May 2020, 00:34:37 »
Love how this looks, I hope everyone who joins the GB loves it. Unfortunately southpaw numpad is a no bueno for me.

Offline gandroider

  • Posts: 45
  • Location: SE Asia
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #72 on: Tue, 05 May 2020, 02:48:46 »
I've been waiting for a full keyboard with numpad on the left. Count me in! PM me when this is ready (hopefully the price range still as estimated on the first page).

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #73 on: Tue, 05 May 2020, 03:30:34 »
I'm hoping no knob is an option. And if all versions absolutely have to come with a knob, I think a better position for it would be the first key on the top left so you can rest your handle on the table while turning the knob. in it's current position you'd have to keep your hand and arm floating above the keyboard the whole time.
apart from the position of the knob, I love everything else about it.
With regards to the position of the knob, everything is still largely in design phase and things could change. However we made the choice for the knob to be where its at in the current design as we feel that it would be easier to reach without having to move your hands from the main alpha cluster as much.

For those of us that do our own coating, it would even more cool if we could get a raw off-the-mill version that hasn't been coated/anodized.  Can't wait either way!

We have no plans for this at the moment, however we'll look into something like that in the future

I'm excited for this to become available, but I have a question about the pcb and some of the features I'd like to see kept in the design.

This is probably an unpopular feature, but are there any plans to support LED lighting for each key and also fro things like Caps Lock, Scroll Lock and Num Lock?

Knob -  I'd prefer if there was an option for no knob/dial. I'd like to see the 4 extra keys on top of the numpad so maybe they could be used for media keys or reprogrammed for other uses.

F13 key -  I support the inclusion of this, though I'm curious what people will use it for in maybe executing macros or something.

I'm new to the custom keyboard scene and I really love the southpaw numpad design you've made. I also support the option for an inverted numpad :)
As of right now there's no plans to support RGB or any specific lighting for the keyboard, other than indicator lights for caps, scoll and numlock.

My idea for the knob is for it to be used as a volume wheel, and the top 3 keys to be use as media/macros.


Offline thornkin

  • Posts: 220
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [UPDATED RENDERS!]
« Reply #74 on: Tue, 05 May 2020, 03:39:06 »
Not a southpaw person so probably out. Good luck with the group buy. Seems like you are filling a definite niche.

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #75 on: Tue, 05 May 2020, 07:16:34 »
Hi all, I added a small poll to gather responses for the knob position. Do take your time to consider and fill it out as once this poll is over the position will be FINALIZED :)

poll here

Offline Jaltr

  • Posts: 152
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #76 on: Tue, 05 May 2020, 08:20:58 »
Is it confirmed to be a southpaw board then?

Sent from my SM-J415G using Tapatalk


Offline abrokencondom

  • Posts: 46
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #77 on: Tue, 05 May 2020, 08:28:55 »
I've been severely missing a numpad, but enjoy the space on the right side without it, so a southpaw is right up my alley. Definitely keeping an eye on this as a potential endgame work keyboard.
I love the variety of knob options being offered, and that they'll be low-profile, which is a lot more aesthetic imo.

I've been fantasizing something similar to this board, with the southpaw numpad and rotary encoder above it.
Albeit:
- Given no need for the extra 3 keys above the num-pad (except to show off artisans), it's instead an OLED screen
- Right side is 65/75%, slimming it down a bit, as I never use Insert, Pause, Scroll lock, Prt Screen
- Potentially split
But that's just my fantasy.


Offline GraffitiDecos

  • Posts: 74
  • Location: Montreal, Qc
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #78 on: Tue, 05 May 2020, 10:26:13 »
I've been severely missing a numpad, but enjoy the space on the right side without it, so a southpaw is right up my alley. Definitely keeping an eye on this as a potential endgame work keyboard.
I love the variety of knob options being offered, and that they'll be low-profile, which is a lot more aesthetic imo.

I've been fantasizing something similar to this board, with the southpaw numpad and rotary encoder above it.
Albeit:
- Given no need for the extra 3 keys above the num-pad (except to show off artisans), it's instead an OLED screen
- Right side is 65/75%, slimming it down a bit, as I never use Insert, Pause, Scroll lock, Prt Screen
- Potentially split
But that's just my fantasy.
Your dream is the Ext65. That was limited to 50 on hand units at 500 usd. I believe three protos were offered in an auction style as full kits and went for nearly 1k.

I currently own a Ducky one, which is 108 and love the 4 extra keys : calculator, volume mute, up and down. The calculator was key to my purchase as I'm an accountant and hate traditional desk calculators (much faster on my numpad). With the rotary encoder I'll have 1 or two keys to figure out ( of the encoder is push sensitive as well, then mute is handled)

Sent from my SM-G973W using Tapatalk


Offline jdc122

  • Posts: 4
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #79 on: Tue, 05 May 2020, 11:39:56 »
southpaw is exactly why i want this. i feel like this layout plus GMK Rudy is my endgame tbh, PLEASE make it.

Offline noorejji

  • Posts: 130
  • Location: yurop
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #80 on: Tue, 05 May 2020, 11:49:09 »
I went with left, assuming southpaw layout. My reasoning is that it would be easier to handle the knob from the side (left lateral), where there are no keycaps or otherwise to interfere. Otherwise I imagine you'd have to use a pincer move.

Offline abrokencondom

  • Posts: 46
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #81 on: Tue, 05 May 2020, 23:38:14 »
Your dream is the Ext65. That was limited to 50 on hand units at 500 usd. I believe three protos were offered in an auction style as full kits and went for nearly 1k.

I currently own a Ducky one, which is 108 and love the 4 extra keys : calculator, volume mute, up and down. The calculator was key to my purchase as I'm an accountant and hate traditional desk calculators (much faster on my numpad). With the rotary encoder I'll have 1 or two keys to figure out ( of the encoder is push sensitive as well, then mute is handled)

Sent from my SM-G973W using Tapatalk
Ext65 is close, but it has no rotary encoder, nor OLED screen. Nor does it have the F-row which I like, despite only really using f4, f5, f6 and f11 ever.
A calculator button would be useful, however I can map that to another F key, and the rotary encoder should be able to handle volume/mute.

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #82 on: Wed, 06 May 2020, 03:13:09 »
Is it confirmed to be a southpaw board then?

Sent from my SM-J415G using Tapatalk

Yes it confirmed to be southpaw.

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #83 on: Wed, 06 May 2020, 03:18:24 »
I've been severely missing a numpad, but enjoy the space on the right side without it, so a southpaw is right up my alley. Definitely keeping an eye on this as a potential endgame work keyboard.
I love the variety of knob options being offered, and that they'll be low-profile, which is a lot more aesthetic imo.

I've been fantasizing something similar to this board, with the southpaw numpad and rotary encoder above it.
Albeit:
- Given no need for the extra 3 keys above the num-pad (except to show off artisans), it's instead an OLED screen
- Right side is 65/75%, slimming it down a bit, as I never use Insert, Pause, Scroll lock, Prt Screen
- Potentially split
But that's just my fantasy.

Thanks for your feedback! We've also toyed with the idea of a OLED screen near the rotary encoder, but in an effort to keep its price low we decided on the more economical option as for now. Perhaps in future revisions or a more premium version of this board, you might see the OLED screen make an appearance :)

Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #84 on: Wed, 06 May 2020, 05:19:10 »
Why people are so eager to put knobs onto the keyboards?..

Sorry, but this kills it for me.

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #85 on: Wed, 06 May 2020, 06:10:47 »
Why people are so eager to put knobs onto the keyboards?..

Sorry, but this kills it for me.
We feel that rotary encoders add a nice amount of utility to a keyboard, since it can be used to solely control volume and mute/unmute while taking up approx 1u~ of space. Something that you'd normally need 3 keys for. Also in the poll ran in the IC a majority of users felt that the rotary encoder would be a welcome addition to this design :)

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #86 on: Wed, 06 May 2020, 07:18:56 »
[redacted]
« Last Edit: Wed, 06 May 2020, 07:26:16 by Kasterborous »

Offline mbsurfer

  • Posts: 99
  • Location: South Carolina, USA
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #87 on: Wed, 06 May 2020, 08:11:30 »
Will there be any renders for a WKL top if WKL is going to be supported?

Offline Kasterborous

  • Thread Starter
  • Posts: 90
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #88 on: Sat, 09 May 2020, 10:03:56 »
Will there be any renders for a WKL top if WKL is going to be supported?
Just updated the main post with this WKL Render!
241970-0

Offline i luv chuletas

  • Posts: 158
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #89 on: Sat, 09 May 2020, 10:22:21 »
I personally love where the knob is currently. Makes the design much more interesting to look at, and I agree that in the long run this is more comfortable then having to reach all the way out to the left of the board. It's a matter of adjusting to muscle memory.

Maybe a taller knob would help mitigate the problem for some folk?

Regardless, this is a must buy for me. Southpawed fullsize with a knob on it? Oh yes please.

Offline J_Noes

  • Posts: 9
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #90 on: Sat, 09 May 2020, 23:31:51 »
I personally love where the knob is currently. Makes the design much more interesting to look at, and I agree that in the long run this is more comfortable then having to reach all the way out to the left of the board. It's a matter of adjusting to muscle memory.

Maybe a taller knob would help mitigate the problem for some folk?

Regardless, this is a must buy for me. Southpawed fullsize with a knob on it? Oh yes please.

make the knob taller won't mitigate the problem because the problem with the current knob position is that you're left hand will be floating above the keyboard. which will get tiring if you're using software where you have to scrub/scroll frequently.

the reason some have suggested it be placed at the left instead is so that your left hand can rest on the table while you use the knob.

Offline i luv chuletas

  • Posts: 158
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #91 on: Sun, 10 May 2020, 00:45:37 »
I personally love where the knob is currently. Makes the design much more interesting to look at, and I agree that in the long run this is more comfortable then having to reach all the way out to the left of the board. It's a matter of adjusting to muscle memory.

Maybe a taller knob would help mitigate the problem for some folk?

Regardless, this is a must buy for me. Southpawed fullsize with a knob on it? Oh yes please.

make the knob taller won't mitigate the problem because the problem with the current knob position is that you're left hand will be floating above the keyboard. which will get tiring if you're using software where you have to scrub/scroll frequently.

the reason some have suggested it be placed at the left instead is so that your left hand can rest on the table while you use the knob.

I'd rather grab it from the top with the tip of my fingers than hook my shoulder into an awkward angle to wrap around and reach the knob.

I get the argument to have it in the corner, but again i just think the trade-off does not outweight having keys around it.

I guess the compromise would be to make it take up a switch slot and have us choose where to put it, but alas

Offline raptorzoz

  • Posts: 92
  • Location: Germany
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #92 on: Sun, 10 May 2020, 08:13:49 »
much prefer the current knob position as well. looks much better than the alternative, and grabbing it from above is the best way to use it anyway. Can't wait to see this go into production.

Offline lorphex

  • Posts: 5
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #93 on: Tue, 19 May 2020, 07:11:18 »
I'm in for 2. Gonna be building a couple for my friends!  :thumb: ;D

Offline reconsiderit

  • Posts: 519
  • Location: Sunnyvale, CA
  • I'm actually not left handed www.switchplate.co
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #94 on: Tue, 19 May 2020, 09:34:55 »
Knob and f13 make good use of that top row space. Cool stuff.
Southpaw 65 || Southpaw Full Size || Trinity XT TKL || TGR Jane V2 || TGR 910 RE || Duck Jetfire || Matrix Lab 1.2 OG || Jubi || Lunar || Lunar II || g80-1800 HEU

switchplate.co

Offline bow3i

  • Posts: 42
  • Location: Singapore
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #95 on: Fri, 19 June 2020, 15:43:08 »
Gimme pl0x

Offline PotatoTM

  • Posts: 292
  • Location: ON, Canada
  • ...
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #96 on: Fri, 19 June 2020, 15:48:32 »
Been into the idea of left-numpads recently, following.

Offline Kings

  • Posts: 15
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #97 on: Fri, 19 June 2020, 16:15:00 »
Was looking for a keyboard for work and I think I just found it. Free up space on the right while also keeping the numpad? Yes, please.

Offline KeebOnMe

  • Posts: 7
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #98 on: Fri, 19 June 2020, 17:44:17 »
Every thing looks great, hope to be one of lucky ones that get a board!

Offline FruityMcSwirl

  • Posts: 3
  • Location: NY NY
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #99 on: Sat, 20 June 2020, 11:55:33 »
I don't even need a numpad but I love knobs

Offline afluffybubble

  • Posts: 5
  • Location: Australia
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #100 on: Sun, 21 June 2020, 12:07:30 »
Looks awesome! Not sure about the knob so a knob free option would be great :P

Offline scatology

  • Posts: 66
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #101 on: Sun, 21 June 2020, 16:51:52 »
Looks awesome! Not sure about the knob so a knob free option would be great :P

+1 

I'm glad to see that I'm not the only one that is not into that trend.

Offline DarkShot

  • Posts: 197
  • Location: Canada
  • Professional Procrastinator
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #102 on: Sun, 21 June 2020, 20:23:14 »
Oh this is perfect. I get back into keyboards and stumble across this which is virtually perfect, I've been sorely missing the numpad for ages now.
  Rest well Nate

Offline Debido666

  • Posts: 4
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #103 on: Tue, 30 June 2020, 17:23:16 »
I'm interested. Make a custom piece that could convert a square to circle for the knob, so it can still be flush with the top.
That way, a customer can put it on either side. Sure a simple adjustment on the PCB wouldn't be that hard.
This would also be perfect for people who do not want to use a knob at all. Two birds...
« Last Edit: Tue, 30 June 2020, 17:26:53 by Debido666 »

Offline esc

  • Posts: 2
  • Location: Canada / USA
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #104 on: Thu, 02 July 2020, 15:55:07 »
I'm so on-board for this keyboard.

I'd rather it be knob-free, but it's not a deal-breaker if this board has a knob.  This layout looks perfect for me.  I'd use it mostly as a TKL with a bunch of macro keys on the left (for programming in Visual Studio).  I also do enough Excel that I'd have the numpad transform into a real numpad occasionally.

EDIT: Please keep F13.  I'll make use of every key.
« Last Edit: Thu, 02 July 2020, 15:57:12 by esc »

Offline glowcloud

  • Posts: 7
  • Location: Pittsburgh, PA
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #105 on: Thu, 02 July 2020, 20:14:35 »
I love the idea of a fullsized southpaw and the polycarb version of this looks so good!

Offline ronnie_gogs

  • Posts: 5
Re: [IC] HEX.6C - A Gasket Mounted Fullsize [KNOB POSITION POLL ADDED!]
« Reply #106 on: Fri, 03 July 2020, 10:42:55 »
I want this..  ;D