Author Topic: [IC]Bear 60% ergo keyboard- Gasket mount(GB ETA 12-15th July.)  (Read 30064 times)

pleasega and 1 Guest are viewing this topic.

Offline Retne

  • Posts: 8
Re: [IC]Bear 60% ergo keyboard- Gasket mount(New renders )
« Reply #100 on: Tue, 09 June 2020, 14:49:32 »
I like the bear.  I'm definitely interested in seeing where you go with this.  I've been on the lookout for a gasket mounted Alice style board.

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(New renders )
« Reply #101 on: Wed, 10 June 2020, 08:06:52 »
Interest checks result

most of peope request below :

PCB: QMK/Via /Solder pcb/split backspace/typec/middle port/

case change : no bear logo options /full claws weight like elephant / fix the engraved letters ,e instead of bear .

color request :rose gold /silver/grey/e white

others : PC case and pc plate /show the gasket details .

about weight .it will like elephant, full kit include brass weight no need upgrade but price will add since we do full brass claws

If there was no much objection then we go move -

next step change the design and show it ,after that move to do some prototypes !!

Thanks all advise

Soon ;D


You could also join my discord get the fast news  :thumb:
« Last Edit: Wed, 10 June 2020, 08:09:27 by jacky »

Offline JSaintS

  • Formerly eNrageDSainT
  • Posts: 705
  • Location: Belgique
    • JSaintS
Re: [IC]Bear 60% ergo keyboard- Gasket mount(New renders )
« Reply #102 on: Wed, 10 June 2020, 08:08:42 »
Interest checks result

most of peope request below :

PCB: QMK/Via /Solder pcb/split backspace/typec/middle port/

case change : no bear logo options /full claws weight like elephant / fix the engraved letters ,e instead of bear .

color request :rose gold /silver/grey/e white

others : PC case and pc plate /show the gasket details .

about weight .it will like elephant, full kit include brass weight no need upgrade but price will add since we do full brass claws

If there was no much objection then we go move -

next step change the design and show it ,after that move to do some prototypes !!

Thanks all advise

Soon ;D

As long as the PCB is QMK/Via and I have an option to have the bear, I am happy.

Offline macclack

  • Posts: 390
  • Location: San Diego, CA
    • Macclack
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #103 on: Wed, 10 June 2020, 08:42:46 »
This is adorable

Offline vi0till

  • Posts: 115
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #104 on: Wed, 10 June 2020, 08:56:39 »
Interest checks result

most of peope request below :

PCB: QMK/Via /Solder pcb/split backspace/typec/middle port/

case change : no bear logo options /full claws weight like elephant / fix the engraved letters ,e instead of bear .

color request :rose gold /silver/grey/e white

others : PC case and pc plate /show the gasket details .

about weight .it will like elephant, full kit include brass weight no need upgrade but price will add since we do full brass claws

If there was no much objection then we go move -

next step change the design and show it ,after that move to do some prototypes !!

Thanks all advise

Soon ;D


You could also join my discord get the fast news  :thumb:
Need your discord link sir.

Sent from my VOG-L29 using Tapatalk


Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #105 on: Wed, 10 June 2020, 09:25:25 »
Interest checks result

most of peope request below :

PCB: QMK/Via /Solder pcb/split backspace/typec/middle port/

case change : no bear logo options /full claws weight like elephant / fix the engraved letters ,e instead of bear .

color request :rose gold /silver/grey/e white

others : PC case and pc plate /show the gasket details .

about weight .it will like elephant, full kit include brass weight no need upgrade but price will add since we do full brass claws

If there was no much objection then we go move -

next step change the design and show it ,after that move to do some prototypes !!

Thanks all advise

Soon ;D


You could also join my discord get the fast news  :thumb:
Need your discord link sir.

Sent from my VOG-L29 using Tapatalk

Here you go :https://discord.gg/rPhYygc

Offline gilbert

  • Posts: 2
  • Location: Germany
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #106 on: Wed, 10 June 2020, 09:26:31 »
Super cute board i am definitely interested!

Offline Sepharis

  • Posts: 19
  • Location: Scotland
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #107 on: Wed, 10 June 2020, 10:05:18 »
I'm extremely interested in this board, but I must ask, will the hotswap support 5 pin switches or only 3 pin?

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #108 on: Wed, 10 June 2020, 11:22:23 »
I'm extremely interested in this board, but I must ask, will the hotswap support 5 pin switches or only 3 pin?
5 pin switches

Offline nirvana549

  • Posts: 3
  • Location: US
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #109 on: Wed, 10 June 2020, 11:28:20 »
Looking good, please keep full backspace for hotswap option :thumb:

Offline ogp3

  • Posts: 10
  • Location: MA, USA
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #110 on: Wed, 10 June 2020, 11:45:37 »
Does "others : PC case and pc plate /show the gasket details" mean that PC will also be offered?

Offline Bachoo

  • Posts: 36
  • Location: Canada, Eh!
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #111 on: Thu, 11 June 2020, 00:36:15 »
This wont be the first, nor the last alice board i'll invest in :P

Offline prizeS

  • Posts: 51
  • Location: Orange County, CA
  • multiple keysets per keyboard? sign me up.
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #112 on: Thu, 11 June 2020, 01:33:25 »
This wont be the first, nor the last alice board i'll invest in :P

gmk ishtar on bear?  :p

Offline Nonnegaard

  • Posts: 41
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #113 on: Thu, 11 June 2020, 02:01:56 »
Looks sick, I don't own an Alice-eqsue board, and I would definitely jump on this if it weren't for my undying loyalty to the Majapahit.

Offline ninjacore

  • Posts: 273
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #114 on: Thu, 11 June 2020, 07:55:59 »
I liked the Maja for a long time, but I think I prefer this layout.  It seems like it better-maintains the symmetry of the original Alice layout while adding arrows.  Certainly, to each their own, I just really like what you've done with this one, OP.

Offline Zeelobby

  • Posts: 731
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #115 on: Thu, 11 June 2020, 08:04:06 »
I liked the Maja for a long time, but I think I prefer this layout.  It seems like it better-maintains the symmetry of the original Alice layout while adding arrows.  Certainly, to each their own, I just really like what you've done with this one, OP.
That said it still irks me that the case is not actually symmetric. I understand that the addition of arrows without removing some mod keys makes that impossible, but the slightly longer right side bugs me for some reason. Haha

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #116 on: Sun, 14 June 2020, 09:58:57 »
I liked the Maja for a long time, but I think I prefer this layout.  It seems like it better-maintains the symmetry of the original Alice layout while adding arrows.  Certainly, to each their own, I just really like what you've done with this one, OP.

Glad to know that ,thanks  :D

Offline FunBox

  • Posts: 27
  • Location: US
    • Null
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #117 on: Sun, 14 June 2020, 10:10:41 »
About when are you hoping to Open this up for orders? Still trying to get used to my Prime_E. If I can convert I'd be interested in getting this :)

Sent from my SM-N975U1 using Tapatalk


Offline DuellM

  • Posts: 163
  • Location: Brooklyn
  • Keyboard Fatty
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #118 on: Sun, 14 June 2020, 10:38:20 »
The Light Blue One Is So Beautiful!!  :-*

Offline KZzzz

  • Posts: 12
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #119 on: Sun, 14 June 2020, 11:19:06 »
I wonder if you can bring the delete key closer to the backspace and add another key under it so that the layout on the right side of the board matches the left side? The lone delete key in its position right now looks kinda odd imo.

Offline Zeelobby

  • Posts: 731
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #120 on: Sun, 14 June 2020, 18:48:05 »
The Light Blue One Is So Beautiful!!  :-*
Didn't get too far into color in the IC but really hoping light blue shows up in the final. Would look great with the brass weight

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #121 on: Mon, 15 June 2020, 12:20:06 »
New steps on bear :

1.add typec usb port

2.remove logo on the top case (two options,have bear logo and no logo )

3.gasket mount features and full brass weight like elephant

4.desk mat options ,thanks to my friends help!(which one would be good ?)



Let me know you opinion,if not have much different voice then we go move to do prototypes .

Keep safe and have a nice day  :thumb:






« Last Edit: Mon, 15 June 2020, 12:23:22 by jacky »

Offline Zeelobby

  • Posts: 731
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #122 on: Mon, 15 June 2020, 12:21:25 »
Still mat #3 for me.

Offline JSaintS

  • Formerly eNrageDSainT
  • Posts: 705
  • Location: Belgique
    • JSaintS
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #123 on: Mon, 15 June 2020, 12:22:00 »
No more bear?! Stupid as it is, I might drop out because of that :(

Offline razor_blade

  • Posts: 113
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #124 on: Mon, 15 June 2020, 12:24:05 »
Looks great!, I'm for keeping a smaller bear or no bear at all. I'm all in with this.

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #125 on: Mon, 15 June 2020, 12:24:10 »
No more bear?! Stupid as it is, I might drop out because of that :(
We have two options,you can choose it have bear or not  :D

Offline yoot

  • Posts: 27
  • Location: US
    • none
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #126 on: Mon, 15 June 2020, 12:26:33 »
I really like mat #2. It is the cleanest mat of the bunch imo

Sent from my Pixel 3 XL using Tapatalk


Offline JSaintS

  • Formerly eNrageDSainT
  • Posts: 705
  • Location: Belgique
    • JSaintS
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #127 on: Mon, 15 June 2020, 12:28:27 »
No more bear?! Stupid as it is, I might drop out because of that :(
We have two options,you can choose it have bear or not  :D

My hero! I thought you removed it completely!


Edit: Deskmat #1 is the cleanest in my opinion, I love it :)

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #128 on: Mon, 15 June 2020, 12:52:45 »
Does "others : PC case and pc plate /show the gasket details" mean that PC will also be offered?
Sure

Offline bigern302

  • Posts: 26
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #129 on: Mon, 15 June 2020, 13:35:41 »
MAT #1

Offline domoshi

  • Posts: 2
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #130 on: Mon, 15 June 2020, 14:59:09 »
Mat #1!

Will there be any RGB per key or underglow?

Offline prizeS

  • Posts: 51
  • Location: Orange County, CA
  • multiple keysets per keyboard? sign me up.
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #131 on: Mon, 15 June 2020, 16:42:57 »
Mat 1 works the best; most neutral one of the three.

Offline heliar_mk

  • Posts: 66
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #132 on: Mon, 15 June 2020, 19:21:40 »
mat1 looks good

Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #133 on: Mon, 15 June 2020, 20:31:17 »
Mat 1 for sure

Offline asianfork

  • Posts: 53
  • Alice
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #134 on: Mon, 15 June 2020, 21:03:29 »
Very very interested indeed! The bear is so cute. Deskmat 1 is more of my style.

Offline Yumelon

  • Posts: 13
  • Location: Northern California
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #135 on: Mon, 15 June 2020, 21:19:02 »
are we still able to get a right side bear logo?

Offline fabijolo

  • Posts: 98
  • Location: Germany
  • I like expensive plastic.
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #136 on: Mon, 15 June 2020, 23:59:09 »
Nice, for me it's definitely either No. 1 or 3 (if I had to chose, I think I'd probably go with No. 3)
« Last Edit: Sat, 20 June 2020, 23:59:54 by fabijolo »

Offline hkhawk

  • Posts: 56
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #137 on: Tue, 16 June 2020, 00:15:43 »
What kind of a monster wouldn't want the bear logo?

Offline suorindrop

  • Posts: 3
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #138 on: Tue, 16 June 2020, 00:38:18 »
mat 1 or 2

Offline vaf1en

  • Posts: 46
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #139 on: Tue, 16 June 2020, 03:49:56 »
What kind of a monster wouldn't want the bear logo?
Anyone over the age of 20. ;)

I vote for mats #2 and #3.
Will buy both if they are made available.

Offline JSaintS

  • Formerly eNrageDSainT
  • Posts: 705
  • Location: Belgique
    • JSaintS
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #140 on: Tue, 16 June 2020, 03:59:10 »
What kind of a monster wouldn't want the bear logo?
Anyone over the age of 20. ;)

I vote for mats #2 and #3.
Will buy both if they are made available.

Hello, I'm 29 going on 30 and I want a bear there, any problem with that? :D

Offline bigern302

  • Posts: 26
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #141 on: Tue, 16 June 2020, 04:06:40 »
What kind of a monster wouldn't want the bear logo?
Anyone over the age of 20. ;)


Going on 40.  I need the bear. 

Offline ninjacore

  • Posts: 273
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #142 on: Tue, 16 June 2020, 06:39:30 »
What kind of a monster wouldn't want the bear logo?
Anyone over the age of 20. ;)

I vote for mats #2 and #3.
Will buy both if they are made available.

This guy desks

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #143 on: Tue, 16 June 2020, 09:22:57 »
are we still able to get a right side bear logo?
i have already do a render for it ,looks like not good so we cancel this .

Offline Carpelos

  • Posts: 11
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #144 on: Tue, 16 June 2020, 10:46:43 »
Oh Alice, here we go again. Hope this time you treat me right.

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #145 on: Wed, 17 June 2020, 12:00:06 »
Move to prototypes .

and go for mat #1

we will see all case after a week  :thumb:
« Last Edit: Wed, 17 June 2020, 12:01:37 by jacky »

Offline DERBS

  • Posts: 40
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #146 on: Wed, 17 June 2020, 13:57:29 »
All it needs is for the bottom rows on each side to be straight like the Lisa layout and it would be perfect!

Offline Marco071

  • Posts: 1
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #147 on: Wed, 17 June 2020, 19:32:35 »
Ow man, This looks perfect. Hope eveything goes well.

Offline jacky

  • Thread Starter
  • Posts: 339
  • Location: UK
Re: [IC]Bear 60% ergo keyboard- Gasket mount(IC form result )
« Reply #148 on: Fri, 19 June 2020, 12:38:49 »
All it needs is for the bottom rows on each side to be straight like the Lisa layout and it would be perfect!
Layout was settle down,already send factory do the prototypes . :thumb:

Offline stein3

  • Posts: 26
Re: [IC]Bear 60% ergo keyboard- Gasket mount(Wait prototypes)
« Reply #149 on: Sat, 20 June 2020, 00:26:42 »
Interest checks result

most of peope request below :

PCB: QMK/Via /Solder pcb/split backspace/typec/middle port/

case change : no bear logo options /full claws weight like elephant / fix the engraved letters ,e instead of bear .

color request :rose gold /silver/grey/e white

others : PC case and pc plate /show the gasket details .
So transitioning from hotswap to solder?

As long as the PCB is QMK/Via and I have an option to have the bear, I am happy.
This. I have to have the bear. The e-white render with the enameled bear looks fantastic. I'd even be willing to fill it myself after anodization.