Author Topic: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020  (Read 33023 times)

0 Members and 1 Guest are viewing this topic.

Offline xlSantos

  • Posts: 2
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/5/2020
« Reply #50 on: Tue, 07 July 2020, 23:03:57 »
I found you guys on IG and then joined the discord. Can't wait to hopefully if financially good get one of these.

Offline Git2Gether

  • Posts: 8
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/5/2020
« Reply #51 on: Wed, 08 July 2020, 11:01:28 »
Simple, but clean design.  I would be interested.

Offline CoolMike

  • Thread Starter
  • Posts: 58
  • Location: Middletown, NY
  • Mechs & Co.
    • Mechs & Co.
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #52 on: Wed, 08 July 2020, 23:06:07 »
Sounds really good, signed up. Any estimates on quantity and dates?

Any expectations for dates assuming you get sufficient numbers for the interest check?

Quantity has been updated under the features list.

Dates are still up in the air based on a few factors so I don't want to give any numbers yet, however the prototype is being ordered now.

Thanks for the continued support folks.

Offline Koobaczech

  • Posts: 371
  • Location: Florida, USA
  • Don't forget to smile :)
    • Pearlboards
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #53 on: Thu, 09 July 2020, 11:48:14 »
This project and design are both beautiful, and I will join in 100% no matter what!

Offline VictorVallecano

  • Posts: 14
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #54 on: Thu, 09 July 2020, 13:05:41 »
100% in. Hope it will not be raffle as it kills my hope in getting this awesome keeb  :(

Offline ab042896

  • Posts: 53
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #55 on: Thu, 09 July 2020, 14:13:26 »
No bottom feet/bumpers?

Offline CoolMike

  • Thread Starter
  • Posts: 58
  • Location: Middletown, NY
  • Mechs & Co.
    • Mechs & Co.
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #56 on: Thu, 09 July 2020, 16:26:26 »
No bottom feet/bumpers?


There will be clear bottom bumpons.

Offline RossLocke18

  • Posts: 13
  • Location: Alberta Canada
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #57 on: Thu, 09 July 2020, 16:37:02 »
Love this design so much. Any idea if you will consider adding color infill to the logo in corner blocker, or badge etc.?

Offline maximize

  • Posts: 119
  • Location: The Land of 10,000 Lakes
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #58 on: Thu, 16 July 2020, 20:33:05 »
Finally, a keyboard with an amazing theme!

Real feedback: I think you'd get 2x the interest if you offered a PC option. But I am probably in regardless.  :p
« Last Edit: Thu, 16 July 2020, 22:46:07 by maximize »

Offline VictorVallecano

  • Posts: 14
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #59 on: Fri, 17 July 2020, 12:52:33 »
[quote author=maximize link=topic=107312.msg2934207#msg2934207 date=1594949585
Real feedback: I think you'd get 2x the interest if you offered a PC option. But I am probably in regardless.  :p
[/quote]

And 1000x if you offer the keyboard free of charge :))

Offline VictorVallecano

  • Posts: 14
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #60 on: Fri, 17 July 2020, 12:53:04 »
[quote author=maximize link=topic=107312.msg2934207#msg2934207 date=1594949585

Real feedback: I think you'd get 2x the interest if you offered a PC option. But I am probably in regardless.  :p
[/quote]

And 1000x if you offer the keyboard free of charge :))

Offline iFuwy

  • Posts: 6
  • Location: San Diego, California
  • Aquarium and keyboard enthusiast!
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #61 on: Fri, 17 July 2020, 14:19:51 »
Filled out a form. Thank you.

Offline Kinesiologist

  • Posts: 94
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #62 on: Fri, 17 July 2020, 18:49:04 »
Looks super cool, can't wait to see the proto :D

Offline CoolMike

  • Thread Starter
  • Posts: 58
  • Location: Middletown, NY
  • Mechs & Co.
    • Mechs & Co.
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #63 on: Sat, 18 July 2020, 07:44:03 »
[quote author=maximize link=topic=107312.msg2934207#msg2934207 date=1594949585

Real feedback: I think you'd get 2x the interest if you offered a PC option. But I am probably in regardless.  :p

And 1000x if you offer the keyboard free of charge :))

[/quote]

If we are lucky enough to be able to do a round 2, I think a PC option would be in order.

Looks super cool, can't wait to see the proto :D

Filled out a form. Thank you.

Thank you!

Proto is in the order queue so hopefully a few months we will have it in our hands. I will keep everyone up to date.

Offline Kahgen

  • Posts: 4
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #64 on: Sun, 19 July 2020, 17:45:45 »
That weight alone makes me want to keep a close look on this board.

Offline VictorVallecano

  • Posts: 14
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #65 on: Mon, 27 July 2020, 10:50:36 »
Any updates guys? Eager to follow the progress  :)

Offline dansemacabre

  • Posts: 2
  • Location: Bangkok Thailand
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #66 on: Mon, 27 July 2020, 14:37:00 »
Very very interested!
Hope it doesn't turn into raffle kind of thing  ^-^

Offline xlSantos

  • Posts: 2
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #67 on: Tue, 28 July 2020, 10:45:14 »
Very very interested!
Hope it doesn't turn into raffle kind of thing  ^-^

They are doing a raffle.

Offline itsslim

  • Posts: 8
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #68 on: Wed, 29 July 2020, 18:50:45 »
This is HOT

Offline wolfez4444

  • Posts: 15
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #69 on: Mon, 24 August 2020, 15:18:41 »
Nice!

Offline 3yatt

  • Posts: 33
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #70 on: Mon, 24 August 2020, 20:08:13 »
I am In

Offline OfTheWild

  • * Esteemed Elder
  • Posts: 1297
  • Location: Cary, NC
  • Make things. Have fun.
    • Studios of the Wild
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #71 on: Sat, 29 August 2020, 13:39:46 »
This looks pretty nice, i'll try for it. :thumb:
i'd be in for a halfplate pc floating setup too if you decide to offer it.
-Dana

Offline Lastpadawan

  • Posts: 41
  • Product design team and Vendor | LastPadawan.Store
    • LastPadawan Store
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #72 on: Wed, 02 September 2020, 23:50:29 »
Putting space anything and 1990 makes this an instant buy for me. Looking forward to the GB launch!

Thanks for making this a thing.

Offline alleneentrekin

  • Posts: 22
  • Location: US
    • j
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #73 on: Thu, 03 September 2020, 06:35:03 »
Would you all consider adding a deep Navy color?

Sent from my Pixel 4 XL using Tapatalk


Offline isot0nic

  • Posts: 9
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #74 on: Thu, 03 September 2020, 22:40:57 »
Im in!! Sorry im new to the mech community, I filled in the google form, is that best way to keep track of release?

Thanks,

Also i second the Navy option!

Offline CoolMike

  • Thread Starter
  • Posts: 58
  • Location: Middletown, NY
  • Mechs & Co.
    • Mechs & Co.
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #75 on: Thu, 03 September 2020, 23:03:40 »
Any updates guys? Eager to follow the progress  :)

Currently, Salvun has received the material to start our prototypes but he is a very very busy man. We will provide another update once that process has started.

Very very interested!
Hope it doesn't turn into raffle kind of thing  ^-^

We are doing a raffle. There will be plenty of opportunities to get in on R1 iterations or possibly R2 if things go well and so forth.

This is HOT

Nice!

I am In

Putting space anything and 1990 makes this an instant buy for me. Looking forward to the GB launch!

Thanks for making this a thing.

Thank you guys for the support! Really appreciate it.

This looks pretty nice, i'll try for it. :thumb:
i'd be in for a halfplate pc floating setup too if you decide to offer it.

Would you all consider adding a deep Navy color?

Sent from my Pixel 4 XL using Tapatalk


So Navy was part of our original color group but we did limit the colors since this is our first keyboard. Logistically we want to make sure this is a sound process and things go smoothly for everyone as well as make sure we provide a high quality keyboard. BUT .... I love blue and I think it deems a spot in a possible R2 if it happens.

Same goes with the half - plate, anything is possible :)

Im in!! Sorry im new to the mech community, I filled in the google form, is that best way to keep track of release?

Thanks,

Also i second the Navy option!

Absolutely! Checking the thread will give you more spaced out updates and our Discord would be the best place to see daily updates if any along with other things we are offering. We have some cool stuff going on right now and planned for the future!


Offline kuro0renji

  • Posts: 20
  • Location: Canada
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #76 on: Sat, 05 September 2020, 20:17:36 »
Can't wait for it

Offline pool

  • Posts: 26
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #77 on: Wed, 14 October 2020, 01:18:48 »
In another universe where I am a 65% fan, this is an insta-cop. Seriously this is incredible!

Offline mellowcake

  • Posts: 11
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #78 on: Wed, 14 October 2020, 11:46:13 »
interested!

Offline alohakbd

  • Posts: 5
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #79 on: Wed, 14 October 2020, 21:15:23 »
Hi, really love the design of this board and needless to say, definitely going to try and cop! One question though: Will you guys be including custom foam for the build?

Offline esclab

  • Posts: 43
  • simple and functional
    • esc lab
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #80 on: Thu, 15 October 2020, 19:52:26 »
<3

Offline treeleaf64

  • Posts: 715
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #81 on: Thu, 15 October 2020, 21:21:35 »
Meme blocker not good in my opinion
but tha'ts just me

Glwic
Leader of Gateron gang
May display immature behavior

Treeleaf's Youtube Channel!
https://www.youtube.com/channel/UCAVQHinK0K-AjLlbc7MZjfA?view_as=subscriber

Offline ckiloza

  • Posts: 2
Re: [IC] Hubble65 - Gasket Mounted 65% Keyboard - Updated 7/9/2020
« Reply #82 on: Sun, 18 October 2020, 04:41:19 »
looks really good, wish it has a higher typing degree