Author Topic: [IC] EPBT TA Origins  (Read 32225 times)

0 Members and 1 Guest are viewing this topic.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8927
  • Location: The Windy City
Re: [IC] EPBT TA Origins
« Reply #100 on: Tue, 06 October 2020, 10:15:27 »
I just discovered this and holy s**t I want this badly.

Offline dr_derivative

  • Thread Starter
  • Posts: 314
  • Location: Cork, Ireland
  • Not a real doctor
Re: [IC] EPBT TA Origins
« Reply #101 on: Tue, 06 October 2020, 13:51:37 »
...

I went through the posts here and suddenly realised it's been few months already since last update on the actual progress (samples order from June?). Has anything changed in that regard? Any tentative ETA for when we may expect GB to run?

ePBT are taking their time making samples since they are also working on their tooling at the moment. They said to expect samples late this year, and I don't really want to press ahead with anything until we've seen their new reverse dyesub quality. Assuming it's all good this will probably run early next year; I'm thinking February since January GBs never do as well. But an exact timeline depends on a lot of things so I can't say for sure right now.
« Last Edit: Tue, 06 October 2020, 13:53:19 by dr_derivative »
GH/Reddit/DT: dr_derivative | Discord: dr_derivative#3618 | IG: dr_derivative_mk
MK Ireland Discord: https://discord.gg/2KdxJzR

Offline Kokaloo

  • Posts: 468
  • Location: Las Vegas
  • 🤘(• ω •)🤙
Re: [IC] EPBT TA Origins
« Reply #102 on: Tue, 20 October 2020, 21:32:41 »
another friendly bump because this will likely be my fav keycap set ever.........

Offline macclack

  • Posts: 435
  • Location: San Diego, CA
    • Macclack
Re: [IC] EPBT TA Origins
« Reply #103 on: Tue, 20 October 2020, 22:11:23 »
I really love this color way and hope it makes it to GB stage. I think ePBT did a decent job on reverse dye sub with TA Triumph Adler. It's a shame manufacturers like BSP aren't more available/mainstream. My biggest issue with ePBT (other than warping) is that their key caps sit so much higher than GMK's (or BSP). Creates awkward gaps with some cases and also just feels slightly off.

Offline ideus

  • * Exalted Elder
  • Posts: 7956
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] EPBT TA Origins
« Reply #104 on: Fri, 27 November 2020, 10:24:48 »
Here are some updated the kit layouts. I'm pretty sure I took into account everyone's suggestions, but let me know if I missed something.

Colevrak, a blue base kit, and a normal legends kit are still TBC until we here back from ePBT about MOQs and stuff.

We've also created a discord server for updates about this set and other projects Ryan and I are working on. Joining the discord is completely optional, all updates will still be posted here of course ;D

Show Image

Show Image

Show Image

Show Image



Please add a Norde kit. It would rock.

Offline HungerMechanic

  • Posts: 713
Re: [IC] EPBT TA Origins
« Reply #105 on: Fri, 27 November 2020, 15:33:23 »
I wonder if ePBT molds will be real Cherry-profile this time. Not that it matters much with me. There are advantages and disadvantages to that.

I also am a bit bothered by how the height and sometimes warping makes them seem more uneven that GMK keycaps.

But I'm glad that the makers of this set are taking their time to create test samples, and see if the new molds are working out. I think we're all waiting to see what kind of improvements have been in the works for EnjoyPBT.

Offline honoka

  • Posts: 284
Re: [IC] EPBT TA Origins
« Reply #106 on: Fri, 27 November 2020, 15:59:39 »
showing interest in norde kit aswell  :)

Offline ideus

  • * Exalted Elder
  • Posts: 7956
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] EPBT TA Origins
« Reply #107 on: Fri, 27 November 2020, 16:01:31 »
If new molds are made the skirts should be a bit longer to match OG Cherry's.

Offline dr_derivative

  • Thread Starter
  • Posts: 314
  • Location: Cork, Ireland
  • Not a real doctor
Re: [IC] EPBT TA Origins
« Reply #108 on: Sat, 28 November 2020, 07:43:36 »
If new molds are made the skirts should be a bit longer to match OG Cherry's.

The whole keycap would need to be lower to match Cherry, not just a longer skirt. I don't think they'll do that, I think the main reason against it is compatibility. OG Cherry/GMK/BSP/JTK all have issues with certain switches and orientations.

I also am a bit bothered by how the height and sometimes warping makes them seem more uneven that GMK keycaps.

The unevenness and warping is something they are trying to improve with the new moulds. That and their reverse dye-sub quality. So hopefully this won't be an issue.

But I'm glad that the makers of this set are taking their time to create test samples, and see if the new molds are working out. I think we're all waiting to see what kind of improvements have been in the works for EnjoyPBT.

Considering these moulds are new, I really don't want to press ahead with a GB before at least seeing what the quality is like. EPBT are taking their sweet time making those samples though :D

Please add a Norde kit. It would rock.

showing interest in norde kit aswell  :)

I might do a small kit with the extra alphas required for swapping Z with Y and the ÄÅÆÖØÜ. Personally, I don't see the point of something more extensive since many of the legends are incorrect for ANSI users too. I guess I could do a Norde kit with the OG typewriter versions of the various Norde layouts, but I doubt many people would actually use that. What do you think?
GH/Reddit/DT: dr_derivative | Discord: dr_derivative#3618 | IG: dr_derivative_mk
MK Ireland Discord: https://discord.gg/2KdxJzR

Offline GSPADE

  • Posts: 28
  • Location: Melbourne, AUS
  • THOK | Metal Keycaps and Cables. www.thok.click
    • THOK
Re: [IC] EPBT TA Origins
« Reply #109 on: Sat, 28 November 2020, 07:47:03 »
Wow so nice! EPBT ftw
THOK | Metal Keycaps and Cables. www.thok.click

Offline ideus

  • * Exalted Elder
  • Posts: 7956
  • Location: In the middle of nowhere.
  • Björkö.
Re: [IC] EPBT TA Origins
« Reply #110 on: Sat, 28 November 2020, 07:58:21 »

The design is very elegant and subtle, while the TA special symbols give the set a nice retro flavor. On legends, I would suggest to offer three versions: (1) An ANSI top row and symbols; (2) The actual TA top row and symbols; (3) A multilingual top row and symbols that covers the most common European Languages: UK, FI/NO/DE . Finally: The blue mods-set would have its proper version of enter-keys, ANSI and ISO.

Online LightningXI

  • * Elevated Elder
  • Posts: 3698
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [IC] EPBT TA Origins
« Reply #111 on: Sun, 29 November 2020, 05:33:56 »
I'm an advocate for taking our time here to get samples that are satisfying to a runner's high standards. Will probably be in for one if it comes out well.

Offline Vibex

  • Posts: 891
  • Location: Cambridge, MA
  • Love y'all
Re: [IC] EPBT TA Origins
« Reply #112 on: Sun, 14 February 2021, 08:22:25 »
Will there be non homing F J and 5 keys?

Offline HungerMechanic

  • Posts: 713
Re: [IC] EPBT TA Origins
« Reply #113 on: Sun, 14 February 2021, 12:53:14 »
Love it. I am a bit worried about warped space bars though. It's one of the main reasons I prefer GMK sets. Would it be possible to offer a separate ABS space bar pack since epbt is apparently doing abs sets now? Having them made in house would help ensure color accuracy and key feel is much more important than shine resistance for me.

Tooling is always changing.

ePBT's molds were bad from everything after Slate until just now. They redid their molds around the end of 2020, and the new spacebars coming from Spectrum are said to be good.

So if it uses relatively fresh and new molds, it could be okay.

GMK, on the other hand, had significant problems from late 2019 to mid-2020. They are said to be retooling, but right now GMK is not a straightness guarantee over ePBT.

Offline Fredington

  • Posts: 323
Re: [IC] EPBT TA Origins
« Reply #114 on: Sun, 14 February 2021, 13:13:55 »
Love it. I am a bit worried about warped space bars though. It's one of the main reasons I prefer GMK sets. Would it be possible to offer a separate ABS space bar pack since epbt is apparently doing abs sets now? Having them made in house would help ensure color accuracy and key feel is much more important than shine resistance for me.

Tooling is always changing.

ePBT's molds were bad from everything after Slate until just now. They redid their molds around the end of 2020, and the new spacebars coming from Spectrum are said to be good.

So if it uses relatively fresh and new molds, it could be okay.

GMK, on the other hand, had significant problems from late 2019 to mid-2020. They are said to be retooling, but right now GMK is not a straightness guarantee over ePBT.

Well, I purchased a recent ePBT set (Royal Alpha) and was unable to get my spacebars straight with either boiling water or a hair dryer. The stems of many the smaller spacebars were so warped/loose they were unusable. I think ABS spacebars, even for the smaller ones, is a fantastic idea.

Offline dr_derivative

  • Thread Starter
  • Posts: 314
  • Location: Cork, Ireland
  • Not a real doctor
Re: [IC] EPBT TA Origins
« Reply #115 on: Sun, 14 February 2021, 16:45:36 »
Will there be non homing F J and 5 keys?

I don't have any in the kit layout right now, but I could add them. I'm curious, what is your use case for non-homing F/J/5 keys?

Love it. I am a bit worried about warped space bars though. It's one of the main reasons I prefer GMK sets. Would it be possible to offer a separate ABS space bar pack since epbt is apparently doing abs sets now? Having them made in house would help ensure color accuracy and key feel is much more important than shine resistance for me.

Tooling is always changing.

ePBT's molds were bad from everything after Slate until just now. They redid their molds around the end of 2020, and the new spacebars coming from Spectrum are said to be good.

So if it uses relatively fresh and new molds, it could be okay.

GMK, on the other hand, had significant problems from late 2019 to mid-2020. They are said to be retooling, but right now GMK is not a straightness guarantee over ePBT.

Well, I purchased a recent ePBT set (Royal Alpha) and was unable to get my spacebars straight with either boiling water or a hair dryer. The stems of many the smaller spacebars were so warped/loose they were unusable. I think ABS spacebars, even for the smaller ones, is a fantastic idea.

As far as I know, Royal Alpha still used the old moulds. I'm not sure about Spectrum, but any of the upcoming reverse dye-subbed sets (like ePBT Samurai, when that ships) will use the new moulds. At the moment they refuse to reverse dye-sub anything more than one or two accent keys with the old moulds because of quality concerns. So this set will have to use the new moulds, which is part of the reason why we've been waiting so long for samples ;D. If warping is an issue with the samples we will look at alternatives (whether that be ABS spacebars, a different manufacturer, etc.)
GH/Reddit/DT: dr_derivative | Discord: dr_derivative#3618 | IG: dr_derivative_mk
MK Ireland Discord: https://discord.gg/2KdxJzR

Offline noodleman

  • Posts: 99
Re: [IC] EPBT TA Origins
« Reply #116 on: Sun, 14 February 2021, 17:25:42 »
can confirm epbt spectrum on has new spacebars.  same with grayscale.  They are much better quality than before and are quite straight, though not as straight as CRP.  Any set produced (including other in stock sets like epbt gray) will also use the new spacebar moulds.

Offline HungerMechanic

  • Posts: 713
Re: [IC] EPBT TA Origins
« Reply #117 on: Sun, 14 February 2021, 22:52:10 »

Well, I purchased a recent ePBT set (Royal Alpha) and was unable to get my spacebars straight with either boiling water or a hair dryer. The stems of many the smaller spacebars were so warped/loose they were unusable. I think ABS spacebars, even for the smaller ones, is a fantastic idea.

Your account rings true, but Royal Alpha was from the "bad period," which was everything between Slate and Spectrum / Grayscale (2021) [the named sets being good].

What the ICs and GBs don't say on the box is the state of the molds at the time of production. This goes for both switches and keycaps. If you want the best results, you need to be aware of the mold status. Not saying this is just, but it's the way things are.

Offline Vibex

  • Posts: 891
  • Location: Cambridge, MA
  • Love y'all
Re: [IC] EPBT TA Origins
« Reply #118 on: Mon, 15 February 2021, 16:43:05 »
This is a weird question, but does anyone know what this key did on the original typewriter? I'm having trouble finding any information online.

Offline dr_derivative

  • Thread Starter
  • Posts: 314
  • Location: Cork, Ireland
  • Not a real doctor
Re: [IC] EPBT TA Origins
« Reply #119 on: Mon, 15 February 2021, 17:10:33 »
This is a weird question, but does anyone know what this key did on the original typewriter? I'm having trouble finding any information online.
(Attachment Link)

On UK models which had text legends the same key was marked 'RELOC'. So I guess it would reposition the page or something? I know next to nothing about typewriters  ;D
GH/Reddit/DT: dr_derivative | Discord: dr_derivative#3618 | IG: dr_derivative_mk
MK Ireland Discord: https://discord.gg/2KdxJzR