Author Topic: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)  (Read 14615 times)

0 Members and 2 Guests are viewing this topic.

Offline hottrout

  • Posts: 595
  • Location: Northern Ireland
  • I'd Hit Dat Key
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #100 on: Thu, 23 July 2020, 12:26:59 »
This is THE keyboard of 2020.
I started typing on a Sinclair Spectrum 'human flesh' keyboard in 1980 and I never stopped.

More
Rig1 |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Rig2 |i9-9900k@5GHz|16GB(3200)|STRIX1080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|Dell AW3418DW
Rig3 |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU
Systems
More
IBM 3101, IBM 3276, IBM 5150, IBM ModelM, Dictaphone Dual Display, Cherry (all of them), Nixdorf, Siemens, Filco Majistouch, Rama M6-B, CA66, ClueBoard, VA69M, Rama U-80, VN66, BOCC, Rama M10-C, Rama M60-A LYN, CyberVoyager, Clarabelle, Elongate Mini 1800, Petrichor 1800, Maja, Think6.5v2, Bear, Cherry CB87
Keyboards

Offline Sabin

  • Posts: 63
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #101 on: Thu, 23 July 2020, 13:21:01 »
Any ballpark estimate for this? I wanted to know since otherwise I would consider joining another GB which will end soon.
He has not finalized but I think all he has said is it will be under $600

Offline toumatakeshi

  • Posts: 11
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #102 on: Thu, 23 July 2020, 17:34:08 »
I want. Hoping I get it.
« Last Edit: Thu, 23 July 2020, 17:41:37 by toumatakeshi »

Offline LVNDSCAPE

  • Posts: 19
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #103 on: Fri, 24 July 2020, 23:55:48 »
Will you consider a rose-gold option?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 678
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #104 on: Sun, 26 July 2020, 08:40:17 »
Will you consider a rose-gold option?

Not currently in the plans. I'm open to doing custom coloured one off's after the GB though

Offline Starius

  • Posts: 527
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #105 on: Sun, 26 July 2020, 12:54:58 »
I tried to get in the run for the original J-01 prototype and that didn't work out.... and now after looking at some of those changes for this iteration, I feel it may have been a blessing in disguise.  Looks like some nice thought out refinements.  I may try another run at getting a J-01.  ;)

Offline dom

  • Posts: 123
  • Location: EU
  • XOXO
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #106 on: Fri, 31 July 2020, 00:08:59 »
Jae, please set the quantity right, so everyone can grab it! 🙏  fantastic one!

Offline santela

  • Posts: 47
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #107 on: Fri, 31 July 2020, 01:20:36 »
Damn, never thought I'd have the chance to purchase this board! Hope the number is right so people don't have to miss out.

I am curious if there is a possibility of different colored penrails? Would be great to match with keycaps.

Offline tempo

  • Posts: 25
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #108 on: Fri, 31 July 2020, 01:38:12 »
Such a beautiful board

Offline rmendis

  • Posts: 352
  • Artisan addict
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #109 on: Sat, 01 August 2020, 01:07:48 »
Love it

Offline Kings

  • Posts: 25
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #110 on: Sat, 01 August 2020, 05:47:17 »
Excited for this! Any chance you'll have a black pen rail in the future?

Offline FZ

  • Posts: 8
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #111 on: Sat, 01 August 2020, 07:22:53 »
This is nice. Can't wait for the group buy.

Offline jooobe

  • Posts: 209
  • Location: USA
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #112 on: Sat, 01 August 2020, 09:03:57 »
give me blue with brass rails and logo please

Offline BlueBoy

  • Posts: 4
  • Location: US
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #113 on: Sun, 02 August 2020, 11:49:27 »
Hope the number of units is high for this one

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 678
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #114 on: Sun, 02 August 2020, 13:16:23 »
I tried to get in the run for the original J-01 prototype and that didn't work out.... and now after looking at some of those changes for this iteration, I feel it may have been a blessing in disguise.  Looks like some nice thought out refinements.  I may try another run at getting a J-01.  ;)

Thanks - lots of refinements, modernisation and some subtle changes  :thumb:

Love it

and I love you


Jae, please set the quantity right, so everyone can grab it! 🙏  fantastic one!

updates from the feedback form, and annoucements on numbers soon.com

give me blue with brass rails and logo please

Blue and Brass will look great :D

Hope the number of units is high for this one

Details on numbers soon...

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 678
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #115 on: Sun, 02 August 2020, 17:28:16 »
Hey folks - quick update:

Thank you to everyone who filled out the feedback form, I've now closed it down. In all we got about three times the number of responses I was expecting, with a huge array of suggestions. Sadly most of the suggestions are compromises I don't want to add to this board however, here are some suggestions that made the cut:

    i) 6u spacebar / row - will be added to PCB layouts only (ofc plate files will be public once the GB closes)
    ii) Split Spacebar option - will be added to PCB layouts only (ofc plate files will be public once the GB closes)
    iii) FR4 plates - will be included in material options

97.5% of responders voted 'yes' to purchasing one, and 2.5% responded 'maybe'. Given this, I intend to make 150 units available with a caveat - if those sell out within the first day I'll open up another 50 for a total of 200 24 hours later. For successful buyers a form will be issued via email for you to select your options. These will be FCFS.

There will be a raffle for the 20 Limited Edition E-white spots one week prior (and some additional F&F LE spots at my discretion).

Prices and dates for both LE and standard versions will be announced soon - I'm currently working through these but expect the date to be late August.

Its late here so I'll update the OP tomorrow :D
« Last Edit: Sun, 02 August 2020, 17:29:47 by Jae-3soteric »

Offline huey

  • Posts: 51
  • Location: UK
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #116 on: Sun, 02 August 2020, 17:39:20 »
FR4 plates was a great addition, I appreciate it chief.

Offline NotFai

  • Posts: 5
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #117 on: Sun, 02 August 2020, 17:45:07 »
I have definitely entered this hobby at the perfect time. Cannot believe I will already have the chance to pickup up my endgame keyboard. I wish you all the best and hope that everyone who really wants one will be able to get in on this.

Offline Surefoot

  • Posts: 264
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #118 on: Sun, 02 August 2020, 18:03:25 »
Definitely in for that deep blue version... probably with the brass bar too. ISO CF plate is a go !

Offline Xemnova

  • Posts: 34
  • Location: Alaska, US
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #119 on: Sun, 02 August 2020, 18:36:56 »
Do you plan on running GBs for different colorways of the pen rail? Asking since the dark navy board with pink accent and pen rail in the J-02 render for the GMK Pink on Navy IC looks sleek af (yes, I know this is the J-01 and not the J-02 used in that render, but I think it would still look just as good)

Offline Scarybean

  • Posts: 3
  • Location: Australia
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #120 on: Sun, 02 August 2020, 20:38:48 »
Happy with the arrangements for quantity. Fingers crossed I will be able to get one when it goes live! Appreciate the addition of the FR4 plate, keen to try out both that and carbon fibre to see which I prefer in this board. Looking forward to the FE raffle too, as I love the e-white! Maybe the RNG gods will be on my side this time? haha

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 678
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #121 on: Mon, 03 August 2020, 02:16:26 »
Do you plan on running GBs for different colorways of the pen rail? Asking since the dark navy board with pink accent and pen rail in the J-02 render for the GMK Pink on Navy IC looks sleek af (yes, I know this is the J-01 and not the J-02 used in that render, but I think it would still look just as good)

Yes and no, it will have an MOQ for any colour options as an addition later, but I'm happy to entertain te idea (personally thinking of doing a full eva themed one later down the line)



FR4 plates was a great addition, I appreciate it chief.

Gotta give the people the options they want :D



Definitely in for that deep blue version... probably with the brass bar too. ISO CF plate is a go !

Blue and brass will be lovely - solid choice



Happy with the arrangements for quantity. Fingers crossed I will be able to get one when it goes live! Appreciate the addition of the FR4 plate, keen to try out both that and carbon fibre to see which I prefer in this board. Looking forward to the FE raffle too, as I love the e-white! Maybe the RNG gods will be on my side this time? haha

More details on the LE Raffle soon!!




Offline hottrout

  • Posts: 595
  • Location: Northern Ireland
  • I'd Hit Dat Key
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #122 on: Mon, 03 August 2020, 04:00:49 »
Excited beyond normal.
I started typing on a Sinclair Spectrum 'human flesh' keyboard in 1980 and I never stopped.

More
Rig1 |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Rig2 |i9-9900k@5GHz|16GB(3200)|STRIX1080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|Dell AW3418DW
Rig3 |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU
Systems
More
IBM 3101, IBM 3276, IBM 5150, IBM ModelM, Dictaphone Dual Display, Cherry (all of them), Nixdorf, Siemens, Filco Majistouch, Rama M6-B, CA66, ClueBoard, VA69M, Rama U-80, VN66, BOCC, Rama M10-C, Rama M60-A LYN, CyberVoyager, Clarabelle, Elongate Mini 1800, Petrichor 1800, Maja, Think6.5v2, Bear, Cherry CB87
Keyboards

Offline solomonshv

  • Posts: 58
Re: [IC] J-01 Rev 1 (Isolation Gasket 65% with Macrokeys)
« Reply #123 on: Tue, 04 August 2020, 03:48:00 »
Excited for this! Any chance you'll have a black pen rail in the future?

probably not. if i manage to snag a board, i'll grab an extra rail and figure out how to paint black myself.
Keebs owned/bought::: Satisfaction 75 standard - cloud white | Diamond 60% Grey | Gok 7V - blue | Clarabelle - black cow | Think6.5V2 LE | iON Zenith - Moss

Caps owned/bought::: GMK WoB, GMK Mizu, GMK Nautilus R2, GMK taro R2, GMK MoDo R2, ePBT Classic Cyrillic, GMK Bread, GMK Sumi, GMK Pono, Cherry G81-3000 SAV

Wish list/Will buy::: Keycult No.2/65, Trifecta by 2Moons, J-01 Rev1, GMK Sloth, GMK Terra,