Author Topic: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production  (Read 16264 times)

0 Members and 1 Guest are viewing this topic.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
    Updates:

    All J-01 support emails have been cleared

    All J-01 Invoices have been sent (or you have an email providing next steps needed within the next 24 hours)

    If you think I've missed something - please let me know ASAP by emailing jae@prototypist.net.

    ------


    The J-01 Rev1 is the next revision in the series of boards. Historically there has been a prototype of the J-01 back in late 2017 and a small run of the same prototype in early 2019.

    Since then the board has been back on the drawing board / butchers block to improve the board and I now feel like itís ready for a more public outing via a Group Buy. Disclaimer up front, I fully appreciate that this board is not for everyone, and some people will enjoy its features, whilst others wonít; but Iím hoping that the people who do like its design will appreciate me bringing it to the community. You can read more about the changes in the IC -
https://geekhack.org/index.php?topic=107597.0



Design Philosophy:

The design is based around the principle of allowing sound development within the case, through the use of a carefully designed acoustic cavity, but with enough mass and dampening (via fully isolating gaskets) to ensure a clean and crisp note.

Visually the design is a modern take on vintage keyboards, specifically inspired by the pen rail on a Model M, and the Macro keys seen on the vintage Commodore boards Ė but in a more current style. This leads to chunky bezels, solid pen rail, and reduced base with the majority of the mass under the Alpha keys to improve sound. Grey base and accent pen rail to accentuate the main body, without drowning it out. The front lip and side profile is designed to give the board a look of one that is floating, without drawing the eye. Optional Brass pen rail to add a touch of elegance.



Prototype:

A prototype is on hand and requires only minor amends that wont impact the quality of the board. This includes revised plates, PCBs and Gaskets. You can review the build stream for the board here and pictures later in this thread:



Keep up to date:



Colours/Options:

Case Material -  Aluminium

Case Colours:
  • Black top (grey base and pen rail)
  • Red top Ė RAL 3005 (grey base and pen rail)
  • Blue top Ė Pantone 533 C (grey base and pen rail) (please note this is the same pantone as the Aegis Navy option)
  • Limited Edition E-white (top and bottom case) and Brass pen rail
  • Optional Brass pen rail can be added to any order as an extra


Here are the colour samples:
Red (on the Isla Prototype)



Blue (on the Allison Prototype)


Plate Options:
  • Carbon Fibre (Fixed ANSI or Fixed ISO)
  • FR4 (Fixed ANSI or Fixed ISO)
  • Plate files will be made avail immediately after the GB for buyers to get more customised options or materials to their liking

PCB/Hardware:
  • QMK / VIA Compat
  • ESD protection
  • Compatible with ANSI / ISO
  • Torx screws used for case and daughterboard
  • USB C as standard



Layouts:

- PCB:

- Fixed ANSI Plate

- Fixed ISO Plate



GB Details:

Ok so J-01 Rev 1 Updates on Prices and dates... All USD prices are approximates as the boards will be listed in GBP but should convert roughly to the prices noted

Dates:

 - Limited Edition Raffle - Opens 8pm Uk (3pm EST, Noon PST) 29th August for 24 hours. Winners Drawn and invoiced on 31st August - 72 hours to pay.

 - Standard Edition - FCFS @ prototypist.net 5th September Time TBC - 200 units. If all units sell silly quick - 50 more 24 hours later (y'all seem hungry enough for this)

 - Shipping of these boards is likely to take place in June 2021 - However I will endeavour to make that earlier if I can, and keep everyone up to date if the timeline slips


Prices:

- Limited Edition (all e-white, brass pen rail) = £445 / $590
- Standard edition (3 colour options, grey base, grey pen rail) = £390 / $510
- Extras - PCB = £30 / $40, Plates (CF or FR4) = £27-35 / $35-45, Brass pen rail = £55 / $70, Grey pen rail = £40 / $50

All boards come with:
- Top Case
- Bottom Case
- Pen Rail (alu for standard, brass for Limited)
- Hard Carry Case
- Triple Layer Gaskets
- CF plate (ISO or ANSI)
- Hardware
- PCB
- Daughterboard (and JST)


Once you purchase FCFS you'll get an email with a form to complete your preferences for colour choices and 10 key macro or 8+logo etc. If this is not completed within 48 hours *I'll pick for you*

Shipping is whatever shipping is - DHL calculate it automagically - that being said if you buy and it seems crazy high def get in touch to discuss.

EU folks - these are the prices without VAT - if you have an EU address VAT will be applied on top at 20% automatically at checkout





Pictures: Pictures of the prototype built on stream on Sunday 19th July







Renders: (please note these are renders only, final colours may differ from these and will be close to the pantones noted above, please bear this in mind.

By Nathan Alphaman:

3 Colours avail

Red with Brass pen rail and logo top

Red with Grey pen rail and 10 key macro top

Blue with Grey pen rail and logo top

Blue with Brass pen rail and 10 key macro top

Black with Grey pen rail and logo top

Black with Brass pen rail and 10 key macro top

E-White Limited Edition with Logo Top

E-White Limited edition with 10 key macro top


By FLX:

Tease 1

Tease 2

Tease 3

Scene 1

Scene 2




Thanks:

- James (AKB for CAD design and works, plus listening to me drone on for hours)
- Flex for the PCB re-design and production and renders
- Nathan Alphaman for some stunning renders
        - Everyone who has shown interest in the board and convinced me to share it wider than just the proto run


[/list]
« Last Edit: Tue, 08 September 2020, 16:24:22 by Jae-3soteric »

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Posts: 10793
  • Location: WI
Approved. Just a note, I notice you have a "keep up to date" section which lists external sites. You must also post major updates to this thread; you can't force people off of the forum if you're going to post the thread here (you can post extra info elsewhere, just the critical updates must make their way back here).

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Approved. Just a note, I notice you have a "keep up to date" section which lists external sites. You must also post major updates to this thread; you can't force people off of the forum if you're going to post the thread here (you can post extra info elsewhere, just the critical updates must make their way back here).

Noted - and yes I'll always keep here updated

Offline dmatx1

  • Posts: 124
Oh, yes, it's happening!

Offline NotFai

  • Posts: 26
This board is by far the most exciting keyboard related product for me since entering the hobby. If I miss out on the LE, I'll cry for a bit and then def go for the black SE board. Amazing job Jae :thumb:

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
This board is by far the most exciting keyboard related product for me since entering the hobby. If I miss out on the LE, I'll cry for a bit and then def go for the black SE board. Amazing job Jae :thumb:

Sounds like a plan (my personal pick for the standard is the blue and grey....)

Offline dom

  • Posts: 162
  • Location: Ä
  • XOXO
Really love this board & Jonathan ... easy "IN" (with a bit of luck I guess) ♥️

Online KeebOnMe

  • Posts: 42
  • Location: Nevada
The red and blue SE look great! Hopefully I'll be able to get a spot!

Offline thanatic

  • Posts: 24
  • Location: CA, USA
Will be able to load up on extra like PCB, plates etc. before SE actually opens?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Will be able to load up on extra like PCB, plates etc. before SE actually opens?

Yes - Limited Edition winners will be able to add via a form then get a shopify invoice from me direct - the SE entries will be able to add to cart an hour before the extras

Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Limited Edition Raffle 29th August
« Reply #10 on: Sat, 29 August 2020, 12:16:17 »
That E-White is beautiful

Offline alleneentrekin

  • Posts: 22
  • Location: US
    • j
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Limited Edition Raffle 29th August
« Reply #11 on: Sat, 29 August 2020, 13:54:55 »
Are the plates standard thickness 1.5mm?

Sent from my Pixel 4 XL using Tapatalk


Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack

Online Rob27shred

  • Posts: 1128
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Limited Edition Raffle form link:

https://docs.google.com/forms/d/15_Ov8Qf9sBO9hi_la2v3eo5wjLjq4tJYjssr7LEKdcE/

Man why do I gotta be broke right now.... :'( Good luck to those entering, this is gonna be an epic LE board IMHO!
Official judge of the first annual Kei toss

Offline ddrfraser1

  • Posts: 428
  • Location: Smashville
  • Just learn to solder
That ducks chickens question almost stumped me. DON"T STRESS ME OUT LIKE THAT!!  :eek: ^-^

Offline dmatx1

  • Posts: 124
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Limited Edition Raffle 29th August
« Reply #15 on: Sat, 29 August 2020, 15:12:23 »
Are the plates standard thickness 1.5mm?
CF plate will be 1.5 mm thick, FR4 is probably 1.6 mm thick.

Offline alleneentrekin

  • Posts: 22
  • Location: US
    • j
Are the plates standard thickness 1.5mm?
CF plate will be 1.5 mm thick, FR4 is probably 1.6 mm thick.
Got it thanks!


Sent from my Pixel 4 XL using Tapatalk


Offline Paitupai

  • Posts: 21
Submitted the raffle form, first thing to do in the morning :) good luck to everyone entering! hopefully I can get one, either the LE, or the SE (wife really likes the red color, while I like blue more.). Amazing board Jae, keep up the good work  :thumb:

Offline DillonHightower

  • Formerly DillonHighsmith
  • Posts: 308
🙏🙏
            


Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Hey folks, so the 20 Limited Edition winners have been selected and notified via email.

Some stats from the past day:

Number of entries pre-refinement: 4,212
Number of entries post-refinement: 3,634 (duplicate entries and suspicious entries removed)


Given the volume of support from the community for the LE I'm going to have a hard think on the Standard Edition - stay tuned for announcements...

Offline bball2

  • Posts: 345
Grats to the winners. Looks like a lot of entries! Only one winner for roughly every 180 entries

Offline Paitupai

  • Posts: 21
Oof L for me, grats to all winner! i hope i can grab one SE

Offline aemonn

  • Posts: 3
Wonder if that volume will maintain to the standard edition. If so, will be tough to get one.

Offline Jyobah

  • Posts: 35
Cograts to the winners. That was an insane amount of entries.  :thumb:

Offline Curin Derwin

  • Posts: 81
Will the standard GB be open this week?

Offline dmatx1

  • Posts: 124
Will the standard GB be open this week?

SE round will be on Saturday, time will be announced on Thursday.
https://www.instagram.com/p/CEoSW-TnkpG/
« Last Edit: Wed, 02 September 2020, 04:49:32 by dmatx1 »

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
GB News for the Standard Edition:


- There will be a new option - Jae's choice, selecting this and I will pick the macro pad style, and colour for you from the GB options - You wont know till you get it!!

- Timings! The J-01 Rev 1 Standard Edition will go live on Saturday 05th September @ 4pm BST, 11am EST, 8am PST, 11pm Beijing...

- Extras will be able to be added to cart one hour before, but will be cancelled if you checkout without a board...

- If the 200 units sell out within 15 mins, I will release a form at 6pm (two hours from when the GB opened) for 50 Raffle slots for the standard edition as well, instead of adding them to the store. This will be open for 24 hours with winners invoiced on Monday 7th September with a 24 hour payment deadline.

- If the site falls over all 250 units will use the 6pm Form and accompanying deadlines.

Extras will be listed here 1 hour before the GB time... https://prototypist.net/collections/j-01-standard-edition

Excited now for Saturday!! Feel free to reach out if you have any questions
« Last Edit: Thu, 03 September 2020, 10:57:10 by Jae-3soteric »

Offline energyd

  • Posts: 150
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #28 on: Thu, 03 September 2020, 10:50:17 »
wish the pcb is hotswap

Offline clik_clak

  • Posts: 329
  • Location: SLC, UT
GB News for the Standard Edition:


- There will be a new option - Jae's choice, selecting this and I will pick the macro pad style, and colour for you from the GB options - You wont know till you get it!!

- Timings! The J-01 Rev 1 Standard Edition will go live on Saturday 05th September @ 4pm BST, 11am EST, 8am PST, 11pm Beijing...

- Extras will be able to be added to cart one hour before, but will be cancelled if you checkout without a board...

- If the 200 units sell out within 15 mins, I will release a form at 6pm (two hours from when the GB opened) for 50 Raffle slots for the standard edition as well, instead of adding them to the store. This will be open for 24 hours with winners invoiced on Monday 7th September with a 24 hour payment deadline.

- If the site falls over all 250 units will use the 6pm Form and accompanying deadlines.

Extras will be listed here 1 hour before the GB time... https://prototypist.net/collections/j-01-standard-edition

Excited now for Saturday!! Feel free to reach out if you have any questions

LOL...15 minutes...

How about you do a form for 100 if bots don't buy every single one up in under 30 seconds?

Come on, Jae...You had almost 4200 entries for 20 slots for the LE. You can't possibly think for even one second these aren't going to be gone instantly.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack

LOL...15 minutes...

How about you do a form for 100 if bots don't buy every single one up in under 30 seconds?

Come on, Jae...You had almost 4200 entries for 20 slots for the LE. You can't possibly think for even one second these aren't going to be gone instantly.

Anything obviously botted will get cancelled, but I'm a one man show, I def dont want to do more than I'm comfortable with. Its already grown from 200 SE units to 250 which is already a ton of extra work.

The demand is way outstripping my wildest exceptions if the LE numbers are anything to go by - hence adding the raffle in

Offline clik_clak

  • Posts: 329
  • Location: SLC, UT

LOL...15 minutes...

How about you do a form for 100 if bots don't buy every single one up in under 30 seconds?

Come on, Jae...You had almost 4200 entries for 20 slots for the LE. You can't possibly think for even one second these aren't going to be gone instantly.

Anything obviously botted will get cancelled, but I'm a one man show, I def dont want to do more than I'm comfortable with. Its already grown from 200 SE units to 250 which is already a ton of extra work.

The demand is way outstripping my wildest exceptions if the LE numbers are anything to go by - hence adding the raffle in

So if bots buy all 200 of the boards in the first few seconds of it being open (like a huge portion of people are fully expecting to happen), you're going to cancel all 200 orders? And what do you do at that point?

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3644
  • Location: Tennessee - USA
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #32 on: Thu, 03 September 2020, 11:39:03 »
Obviously an ungodly amount of people are going to try to purchase a board.  It's a huge opportunity for flippers, and a beautiful board for collectors.  I don't think there's any way to properly police the buy.  It's just the world we live in.  Best of luck to all.  I'll be shooting for a blue one!

Offline clik_clak

  • Posts: 329
  • Location: SLC, UT
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #33 on: Thu, 03 September 2020, 12:13:24 »
Obviously an ungodly amount of people are going to try to purchase a board.  It's a huge opportunity for flippers, and a beautiful board for collectors.  I don't think there's any way to properly police the buy.  It's just the world we live in.  Best of luck to all.  I'll be shooting for a blue one!

I agree. The reason I bring it up though is that there has been a couple other FCFS GB's in the last couple weeks where bots clearly bought everything up in the first few seconds and all we got is "wow, we didn't expect that. A larger portion of the orders were clearly bought by bots. Guess you should just be faster than a computer next time. Oh btw, buy our next GB that will just be eaten up by bots again! Have fun buying these on the aftermarket! BYE!"

Also, there's easy ways to remedy being only a 1-man show. You'd think all these businesses selling out in a matter of seconds would look at this as a business opportunity instead of a hobby to make a bit of money on the side. You'd think 4212 entries for 20 slots would maybe make someone re-consider why they only sold 20, or how they could offer 500-1000 instead of 200 of an item.

The times of these sellers being shocked that there's a demand for their products is long gone. I, along with others, find it EXTREMELY hard to believe that Jae (and any other sellers running raffles these days) don't know the demand for their products.

Offline DukeEsquire

  • Posts: 464
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #34 on: Thu, 03 September 2020, 12:26:34 »
Obviously an ungodly amount of people are going to try to purchase a board.  It's a huge opportunity for flippers, and a beautiful board for collectors.  I don't think there's any way to properly police the buy.  It's just the world we live in.  Best of luck to all.  I'll be shooting for a blue one!

I agree. The reason I bring it up though is that there has been a couple other FCFS GB's in the last couple weeks where bots clearly bought everything up in the first few seconds and all we got is "wow, we didn't expect that. A larger portion of the orders were clearly bought by bots. Guess you should just be faster than a computer next time. Oh btw, buy our next GB that will just be eaten up by bots again! Have fun buying these on the aftermarket! BYE!"

Also, there's easy ways to remedy being only a 1-man show. You'd think all these businesses selling out in a matter of seconds would look at this as a business opportunity instead of a hobby to make a bit of money on the side. You'd think 4212 entries for 20 slots would maybe make someone re-consider why they only sold 20, or how they could offer 500-1000 instead of 200 of an item.

The times of these sellers being shocked that there's a demand for their products is long gone. I, along with others, find it EXTREMELY hard to believe that Jae (and any other sellers running raffles these days) don't know the demand for their products.

Doing QC for 500 - 1000 boards would be a full time job.

If they actually wanted to make money, they would just do auction and be done with it.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #35 on: Thu, 03 September 2020, 12:31:52 »
Obviously an ungodly amount of people are going to try to purchase a board.  It's a huge opportunity for flippers, and a beautiful board for collectors.  I don't think there's any way to properly police the buy.  It's just the world we live in.  Best of luck to all.  I'll be shooting for a blue one!

I agree. The reason I bring it up though is that there has been a couple other FCFS GB's in the last couple weeks where bots clearly bought everything up in the first few seconds and all we got is "wow, we didn't expect that. A larger portion of the orders were clearly bought by bots. Guess you should just be faster than a computer next time. Oh btw, buy our next GB that will just be eaten up by bots again! Have fun buying these on the aftermarket! BYE!"

Also, there's easy ways to remedy being only a 1-man show. You'd think all these businesses selling out in a matter of seconds would look at this as a business opportunity instead of a hobby to make a bit of money on the side. You'd think 4212 entries for 20 slots would maybe make someone re-consider why they only sold 20, or how they could offer 500-1000 instead of 200 of an item.

The times of these sellers being shocked that there's a demand for their products is long gone. I, along with others, find it EXTREMELY hard to believe that Jae (and any other sellers running raffles these days) don't know the demand for their products.


Ok - a few things to unpack here I guess.

I know there is a lot of demand for a lot of products - but this isnít my day job. For me itís very much a hobby on evenings and weekends; and it wonít replace my day job.

Sure, I could expand and hire more help and maybe that will happen but thatís not on the cards right now and not something I can arrange quickly especially in a Covid affected world.

In terms of expectations; the number of LE submissions was way beyond anything I ever expected in my wildest dreams, and more than anyone I spoke to about it expected. Thatís awesome, humbling and terrifying all at once. But there is still a limit on what I can manage, what I have the space to hold and quality control (2200sqft fills up faster than you expect), and ultimately what risk I want to expose the company to.

Iíd love to let everyone who wants one get one. But thatís not practical right now. I upped the limit as best I could and introduced a FCFS and raffle option. I will continue to fight the bots as much as possible and I wish everyone the best of luck on Saturday.


Sent from my iPhone using Tapatalk Pro

Offline clik_clak

  • Posts: 329
  • Location: SLC, UT
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #36 on: Thu, 03 September 2020, 12:35:25 »
Obviously an ungodly amount of people are going to try to purchase a board.  It's a huge opportunity for flippers, and a beautiful board for collectors.  I don't think there's any way to properly police the buy.  It's just the world we live in.  Best of luck to all.  I'll be shooting for a blue one!

I agree. The reason I bring it up though is that there has been a couple other FCFS GB's in the last couple weeks where bots clearly bought everything up in the first few seconds and all we got is "wow, we didn't expect that. A larger portion of the orders were clearly bought by bots. Guess you should just be faster than a computer next time. Oh btw, buy our next GB that will just be eaten up by bots again! Have fun buying these on the aftermarket! BYE!"

Also, there's easy ways to remedy being only a 1-man show. You'd think all these businesses selling out in a matter of seconds would look at this as a business opportunity instead of a hobby to make a bit of money on the side. You'd think 4212 entries for 20 slots would maybe make someone re-consider why they only sold 20, or how they could offer 500-1000 instead of 200 of an item.

The times of these sellers being shocked that there's a demand for their products is long gone. I, along with others, find it EXTREMELY hard to believe that Jae (and any other sellers running raffles these days) don't know the demand for their products.

Doing QC for 500 - 1000 boards would be a full time job.

If they actually wanted to make money, they would just do auction and be done with it.

Again, if you're going to turn your hobby into a business, it's time to treat the hobby like a business. That includes hiring help, even if its on a contract basis to help when you do have a large number of sells. I can imagine doing QC on 20 boards is rather annoying, let alone 200. But again, there's simple ways to remedy that annoyance while you're rolling in the money you're making.

It's not like Jae is hurting for space by any means. He has a brand new huge workshop that can easily accommodate a few helpers to help him bust out the QC.
« Last Edit: Thu, 03 September 2020, 12:39:43 by clik_clak »

Offline sagarsiddhpura

  • Posts: 59
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #37 on: Thu, 03 September 2020, 12:50:39 »
Obviously an ungodly amount of people are going to try to purchase a board.  It's a huge opportunity for flippers, and a beautiful board for collectors.  I don't think there's any way to properly police the buy.  It's just the world we live in.  Best of luck to all.  I'll be shooting for a blue one!

I agree. The reason I bring it up though is that there has been a couple other FCFS GB's in the last couple weeks where bots clearly bought everything up in the first few seconds and all we got is "wow, we didn't expect that. A larger portion of the orders were clearly bought by bots. Guess you should just be faster than a computer next time. Oh btw, buy our next GB that will just be eaten up by bots again! Have fun buying these on the aftermarket! BYE!"

Also, there's easy ways to remedy being only a 1-man show. You'd think all these businesses selling out in a matter of seconds would look at this as a business opportunity instead of a hobby to make a bit of money on the side. You'd think 4212 entries for 20 slots would maybe make someone re-consider why they only sold 20, or how they could offer 500-1000 instead of 200 of an item.

The times of these sellers being shocked that there's a demand for their products is long gone. I, along with others, find it EXTREMELY hard to believe that Jae (and any other sellers running raffles these days) don't know the demand for their products.

Doing QC for 500 - 1000 boards would be a full time job.

If they actually wanted to make money, they would just do auction and be done with it.

Again, if you're going to turn your hobby into a business, it's time to treat the hobby like a business. That includes hiring help, even if its on a contract basis to help when you do have a large number of sells. I can imagine doing QC on 20 boards is rather annoying, let alone 200. But again, there's simple ways to remedy that annoyance while you're rolling in the money you're making.

It's not like Jae is hurting for space by any means. He has a brand new huge workshop that can easily accommodate a few helpers to help him bust out the QC.

If it seems so easy to you, why dont you run a gb. What should be his hobby and what should be his business is his decision. Just because you would do it does not mean he has to do it. There are lot and lot more details / minor things / major things than you can even imagine while running a gb. This is a huge risk you are taking and there are lot of factors that can go wrong. Its easy to be an arm chair critic and say oh just hire more people and it solves the problem but and would be far off. I sincerely hope you run a GB and experience things rather than assuming jae rolling in money

Offline haystack

  • Posts: 25
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #38 on: Thu, 03 September 2020, 13:02:59 »
Or Jae could just double the price, which would significantly reduce the financial motivation for potential flippers.

Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #39 on: Thu, 03 September 2020, 13:13:38 »
Just let the man run his GB, he's literally catering to everyone as much as he can....

Its unbelievably hard to please everyone, cut the guy some slack.

If you want to pay the price, there are places you can go an commission a board you like for a high price and not have to fight bots an flippers etc.

At least now there's that option, GBs have been around for quite awhile an theres always been bots, flippers, etc. Just hopefully you're fast enough, or get lucky and if not, move onto the next GB, no need to get salty or think the world is over, there will be more keeb GBs in the future, and more endgame layouts.

Let the guy run his show and Goodluck to everyone entering.

Offline noahf

  • Posts: 93
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #40 on: Thu, 03 September 2020, 13:18:22 »
rolling in money hahahahahahaaha

while i thoroughly enjoy my j01 i know for a fact that it COST jae money to deliver these and that was at a significant gb price to begin with. Dont think Jae is "rolling" in money from his group buys.

Offline clik_clak

  • Posts: 329
  • Location: SLC, UT
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #41 on: Thu, 03 September 2020, 13:18:58 »
Or Jae could just double the price, which would significantly reduce the financial motivation for potential flippers.

I think triple the price would be even better. Even a vickery....If he gets 3600 real entries again, the 201st highest price could be the sell price.

Don't get me wrong...I love Jae and I love everything he has done for the community. I want him to make an absolute killing selling every board he makes. There's very few people in the community that deserve it as much as he does. He knows he can, too. It bugs me when any sellers says things like "if these sell out in 15 minutes." I can just imagine him giggling typing something like that out when he just got 3600 real entries for 20 slots. The only reason these 200 slots don't sell out in under a minute is if his site crashes and it takes him longer than 15 minutes to get the site back up.

I'd still like to know what the resolution is if all 200 slots are snatched up by bots instantly, which most of us are expecting. Does it go to raffle at that point? And if it's going to go to raffle, why not just raffle off 200 slots anyways since you're going to have to do a raffle as it is?

Offline clik_clak

  • Posts: 329
  • Location: SLC, UT
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #42 on: Thu, 03 September 2020, 13:27:33 »
Just let the man run his GB, he's literally catering to everyone as much as he can....

Its unbelievably hard to please everyone, cut the guy some slack.

If you want to pay the price, there are places you can go an commission a board you like for a high price and not have to fight bots an flippers etc.

At least now there's that option, GBs have been around for quite awhile an theres always been bots, flippers, etc. Just hopefully you're fast enough, or get lucky and if not, move onto the next GB, no need to get salty or think the world is over, there will be more keeb GBs in the future, and more endgame layouts.

Let the guy run his show and Goodluck to everyone entering.

I've seen Jae mention that he is willing to do commissions already, which I'm fully considering when I lose on Saturday. I'm sure I'm far from the only one that is considering it as well.

Jae, have you considered a basic price list for these similar to what Keycult has? I know most cases are handled on a case-by-case basic, but getting a general idea of what something like that may cost could help with planning.

Offline kwerdenker

  • Posts: 26
    • thinkkwer.eu
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #43 on: Thu, 03 September 2020, 13:46:30 »
Don't get me wrong...I love Jae and I love everything he has done for the community. I want him to make an absolute killing selling every board he makes. There's very few people in the community that deserve it as much as he does. He knows he can, too. It bugs me when any sellers says things like "if these sell out in 15 minutes." I can just imagine him giggling typing something like that out when he just got 3600 real entries for 20 slots. The only reason these 200 slots don't sell out in under a minute is if his site crashes and it takes him longer than 15 minutes to get the site back up.

I'd still like to know what the resolution is if all 200 slots are snatched up by bots instantly, which most of us are expecting. Does it go to raffle at that point? And if it's going to go to raffle, why not just raffle off 200 slots anyways since you're going to have to do a raffle as it is?

If you love Jae, stop attacking and pestering him. He has put as much thought and effort behind this as he can. He already worked out the addition 50 raffle units after the LE showed hom much interest for the board exists. That's a quarter more QC and shipping work for him, which he didn't need to do but felt obliged anyways. He's been working his ass off besides having a normal day job, a family live and a Top Clack show and stream each week.

Stop treating this like there is a right for you to own a keyboard. It's not. Will it suck if you won't be able to get one in the FCFS? Yes. Will it suck that you won't get one from the 50 raffle units afterwards? Yes again. But know full well that Jae has poured his heart and soul into getting this done as smoothly and as fairly as possible WITHOUT sacrificing his own sanity and health for it.

Offline clik_clak

  • Posts: 329
  • Location: SLC, UT
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #44 on: Thu, 03 September 2020, 14:21:25 »
Don't get me wrong...I love Jae and I love everything he has done for the community. I want him to make an absolute killing selling every board he makes. There's very few people in the community that deserve it as much as he does. He knows he can, too. It bugs me when any sellers says things like "if these sell out in 15 minutes." I can just imagine him giggling typing something like that out when he just got 3600 real entries for 20 slots. The only reason these 200 slots don't sell out in under a minute is if his site crashes and it takes him longer than 15 minutes to get the site back up.

I'd still like to know what the resolution is if all 200 slots are snatched up by bots instantly, which most of us are expecting. Does it go to raffle at that point? And if it's going to go to raffle, why not just raffle off 200 slots anyways since you're going to have to do a raffle as it is?

If you love Jae, stop attacking and pestering him. He has put as much thought and effort behind this as he can. He already worked out the addition 50 raffle units after the LE showed hom much interest for the board exists. That's a quarter more QC and shipping work for him, which he didn't need to do but felt obliged anyways. He's been working his ass off besides having a normal day job, a family live and a Top Clack show and stream each week.

Stop treating this like there is a right for you to own a keyboard. It's not. Will it suck if you won't be able to get one in the FCFS? Yes. Will it suck that you won't get one from the 50 raffle units afterwards? Yes again. But know full well that Jae has poured his heart and soul into getting this done as smoothly and as fairly as possible WITHOUT sacrificing his own sanity and health for it.

K

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #45 on: Thu, 03 September 2020, 18:35:28 »

Jae, have you considered a basic price list for these similar to what Keycult has? I know most cases are handled on a case-by-case basic, but getting a general idea of what something like that may cost could help with planning.

I'm not against doing commissions post the GB running if people are interested. If there is demand for it I'll work out pricing etc at the time; and then publish something, but its not something I'm actively pushing or doing rn

Offline DukeEsquire

  • Posts: 464
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #46 on: Thu, 03 September 2020, 19:11:26 »
Or Jae could just double the price, which would significantly reduce the financial motivation for potential flippers.

I think triple the price would be even better. Even a vickery....If he gets 3600 real entries again, the 201st highest price could be the sell price.

Don't get me wrong...I love Jae and I love everything he has done for the community. I want him to make an absolute killing selling every board he makes. There's very few people in the community that deserve it as much as he does. He knows he can, too. It bugs me when any sellers says things like "if these sell out in 15 minutes." I can just imagine him giggling typing something like that out when he just got 3600 real entries for 20 slots. The only reason these 200 slots don't sell out in under a minute is if his site crashes and it takes him longer than 15 minutes to get the site back up.

I'd still like to know what the resolution is if all 200 slots are snatched up by bots instantly, which most of us are expecting. Does it go to raffle at that point? And if it's going to go to raffle, why not just raffle off 200 slots anyways since you're going to have to do a raffle as it is?

I hope you don't win the FCFS or the raffle. Too negative.

I think the vast majority of boards will end up with people that will enjoy them.

Offline LOLWK

  • Posts: 8
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #47 on: Thu, 03 September 2020, 19:58:41 »
Hey Jae. Thanks for providing your time and effort into make this great looking keyboard. I hope im one of the lucky few to get one.

Offline alleneentrekin

  • Posts: 22
  • Location: US
    • j
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #48 on: Thu, 03 September 2020, 20:07:28 »
Don't worry about all the people salty that you aren't doing more. They're not the ones that have to do hours of qc, design, planning, logistics, etc. This is a beautiful board and I hope I'm lucky enough to get one!

Sent from my Pixel 4 XL using Tapatalk


Offline JueVioleGrace

  • Posts: 4
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #49 on: Thu, 03 September 2020, 20:49:10 »
I love the classic design with the macro pads, I hope I can get one. Thanks for your work Jae!

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #50 on: Thu, 03 September 2020, 23:29:24 »
Hey Jae. Thanks for providing your time and effort into make this great looking keyboard. I hope im one of the lucky few to get one.

Thanks for the support, it really means the world - best of luck on Sat!

I love the classic design with the macro pads, I hope I can get one. Thanks for your work Jae!

I hope everyone who buys is someone who really wants one  :thumb:

Don't worry about all the people salty that you aren't doing more. They're not the ones that have to do hours of qc, design, planning, logistics, etc. This is a beautiful board and I hope I'm lucky enough to get one!

Sent from my Pixel 4 XL using Tapatalk



I know there will always be people unhappy with any decision, but that doesnt mean I should stop striving to please as many as possible within the boundaries I'm comfortable with. Best of luck on Saturday!!

Offline Spicemaster

  • Posts: 14
  • Location: NJ USA
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #51 on: Fri, 04 September 2020, 10:13:44 »
Is there a set distribution for each color to be sold? Like 70/80 of the three colors? Or is it based off of demand from those first ~200 that are purchased to figure out how many of each color there is?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #52 on: Fri, 04 September 2020, 10:20:45 »
Is there a set distribution for each color to be sold? Like 70/80 of the three colors? Or is it based off of demand from those first ~200 that are purchased to figure out how many of each color there is?


No set distribution needed


Sent from my iPhone using Tapatalk Pro

Offline dmatx1

  • Posts: 124
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #53 on: Fri, 04 September 2020, 10:24:25 »
I was slow.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3644
  • Location: Tennessee - USA
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #54 on: Fri, 04 September 2020, 13:34:42 »
Oops.   I just noticed that the time conversion in your OG post says 11:00 pm CST.  That should be 10:00am CST.   Central time REPRESENT.  We got this, boys.  Time to win one for the middle of the US

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #55 on: Fri, 04 September 2020, 13:38:42 »
Oops.   I just noticed that the time conversion in your OG post says 11:00 pm CST.  That should be 10:00am CST.   Central time REPRESENT.  We got this, boys.  Time to win one for the middle of the US

The 11pm CST was Chinese Standard Time (Beijing). The first two listed were US times but you are correct on it being 10am Central US time :)

Iíve updated the OP to be clear


Sent from my iPhone using Tapatalk Pro

Offline Kings

  • Posts: 38
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #56 on: Fri, 04 September 2020, 16:19:51 »
Let's say we are lucky enough to purchase a board and want to purchase extras afterwards. Will there be a small window to do so or will it be cancelled since the board is not in the same cart?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #57 on: Fri, 04 September 2020, 16:21:51 »
Let's say we are lucky enough to purchase a board and want to purchase extras afterwards. Will there be a small window to do so or will it be cancelled since the board is not in the same cart?

If buying extras after the board, add the order number from your board purchase to the comments box on checkout or Email me to add extras directly. Extras will likely be listed until 24 hours after the boards sell


Sent from my iPhone using Tapatalk Pro

Offline dRpkebs

  • Posts: 22
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #58 on: Fri, 04 September 2020, 17:51:16 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #59 on: Fri, 04 September 2020, 17:52:41 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?


Having it in cart does not reserve it. It has to be checked out.


Sent from my iPhone using Tapatalk Pro

Offline alleneentrekin

  • Posts: 22
  • Location: US
    • j
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #60 on: Fri, 04 September 2020, 17:52:54 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?
I would assume that you are guaranteed to get one once you check out. It wouldn't make much sense to reserve a board for someone if all they do is add it to the cart.

Sent from my Pixel 4 XL using Tapatalk


Offline dRpkebs

  • Posts: 22
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #61 on: Fri, 04 September 2020, 17:54:12 »
If I'm lucky enough to add one to the cart on Saturday, will having it in the cart pretty much guarantee that I'll get one after I checkout and pay? Or does adding it to the cart mean nothing until you actually pay and get a confirmation email?


Having it in cart does not reserve it. It has to be checked out.


Sent from my iPhone using Tapatalk Pro


Okay thanks!

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #62 on: Sat, 05 September 2020, 09:00:34 »
PLEASE READ CAREFULLY:

The extras for the J-01 Standard Edition are now live (plates/PCBs/Pen Rails) here:
https://prototypist.net/collections/j-01-standard-edition/products/group-buy-j-01-rev-1-standard-edition-extras

You can add these to cart ready to add your board in one hour when the board goes on sale at 4pm UK time.

Please do not checkout with just these items - any order doing so prior to the board going live will be cancelled and refunded.

-------------------------

For the main GB for the Standard Edition in 1 hour - remember

- you are limited to one board per order;
- you can add extras later via a secondary order and adding your board order number to the comments or by emailing jae@prototypist.net
- transactions will be cancelled if its an obvious bot transaction - this will be at my sole discretion...

Offline Starius

  • Posts: 547
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #63 on: Sat, 05 September 2020, 10:02:48 »
Damn, sold out already!   :'(

Offline Kings

  • Posts: 38
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #64 on: Sat, 05 September 2020, 10:06:37 »
PLEASE READ CAREFULLY:

The extras for the J-01 Standard Edition are now live (plates/PCBs/Pen Rails) here:
https://prototypist.net/collections/j-01-standard-edition/products/group-buy-j-01-rev-1-standard-edition-extras

You can add these to cart ready to add your board in one hour when the board goes on sale at 4pm UK time.

Please do not checkout with just these items - any order doing so prior to the board going live will be cancelled and refunded.

-------------------------

For the main GB for the Standard Edition in 1 hour - remember

- you are limited to one board per order;
- you can add extras later via a secondary order and adding your board order number to the comments or by emailing jae@prototypist.net
- transactions will be cancelled if its an obvious bot transaction - this will be at my sole discretion...

Extras seem to have disappeared. Will they come back up?

EDIT: Nevermind, they came back. Thanks!
« Last Edit: Sat, 05 September 2020, 10:08:29 by Kings »

Offline Jyobah

  • Posts: 35
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #65 on: Sat, 05 September 2020, 10:08:24 »
I ..was..to..slow 😢

Offline Starius

  • Posts: 547
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #66 on: Sat, 05 September 2020, 10:09:31 »
I ..was..to..slow 😢

I blame typing in my credit card number..... wish Paypal had been an option!

Offline MajorZoT

  • Posts: 2
  • Location: Germany
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #67 on: Sat, 05 September 2020, 10:15:05 »
I ..was..to..slow 😢

I blame typing in my credit card number..... wish Paypal had been an option!

By the time i got to the checkout 4 minutes after the launch it was already too late  :))

Offline jimboytacos

  • Posts: 213
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #68 on: Sat, 05 September 2020, 10:22:52 »
I must an idiot, but where was the link to the standard edition?

I didn't even see it here:
https://prototypist.net/collections/j-01-standard-edition


Was it a form link?


So bummed. I even woke up at 6am for this too ..

Offline Starius

  • Posts: 547
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #69 on: Sat, 05 September 2020, 10:29:24 »
I must an idiot, but where was the link to the standard edition?

I didn't even see it here:
https://prototypist.net/collections/j-01-standard-edition


Was it a form link?


So bummed. I even woke up at 6am for this too ..

That was the correct link, but it was quickly deactivated after everything sold out. (Which it did in under 2 minutes by my estimation.)

Offline wazzuppi

  • Posts: 2
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #70 on: Sat, 05 September 2020, 10:36:40 »
Seriously bummed missing out on this one

I ordered about 1 minute after the release time and 1 extra had shown sold out and once it refreshed again everything was sold out. Insane

Obviously just too much interest and not enough sold :(
« Last Edit: Sat, 05 September 2020, 10:40:31 by wazzuppi »

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #71 on: Sat, 05 September 2020, 10:37:38 »
And we are done...

So the API to limit the boards to 200 failed - and we ended up north of that...I'm not sure where yet but we hit 250 at 36 seconds... I'll provide more details later and the Raffle will go live on the hour for the 50 additional boards - raffle open 24 hours. Link here soon

For clarity I will only be cancelling Botted orders not people who got in on the GB - had so many DMs on this so apologies if I dont reply to them all

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #72 on: Sat, 05 September 2020, 11:08:39 »
Raffle form is here:

https://docs.google.com/forms/d/14ZzJ6lCCPFyujERWiHS8gUHf89-FAS5ghV30iaVZsgs

Anyone with an order already will be removed from the list, and any cancelled order from bots will be banned


Form Open 24 hours - winners drawn and notified as per details on the form

Offline neutralstate

  • Posts: 152
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #73 on: Sat, 05 September 2020, 11:17:36 »
really happy to have managed to grab one.

in the rush to purchase the board i realized there wasn't an option to pick ANSI or ISO plate, will there be an email or form opening later to select this?

Edit: saw this in the item listing: Plates - after the GB closes all successful buyers will receive a form via email to select their Plate material (FR4 or CF) and layout (Fixed ISO or Fixed ANSI). 

Don't see the in the form in my email yet though, hope it's not something wrong on my end!
« Last Edit: Sat, 05 September 2020, 11:49:34 by neutralstate »

Offline Jyobah

  • Posts: 35
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #74 on: Sat, 05 September 2020, 11:25:54 »
In for the raffle. 🙏🏻

Offline art3mis

  • Posts: 9
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #75 on: Sat, 05 September 2020, 11:31:35 »
Hopefully more luck with the raffle  :D

Offline dmatx1

  • Posts: 124
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #76 on: Sat, 05 September 2020, 12:55:22 »
in the rush to purchase the board i realized there wasn't an option to pick ANSI or ISO plate, will there be an email or form opening later to select this?
Check your inbox, Jae has sent out emails for FCFS buyers an hour ago.

Offline Curin Derwin

  • Posts: 81
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #77 on: Sat, 05 September 2020, 19:29:46 »
Is there still time for a chance at this?

Offline neutralstate

  • Posts: 152
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #78 on: Sat, 05 September 2020, 19:55:22 »
in the rush to purchase the board i realized there wasn't an option to pick ANSI or ISO plate, will there be an email or form opening later to select this?
Check your inbox, Jae has sent out emails for FCFS buyers an hour ago.

saw it, thanks all!

Offline Curin Derwin

  • Posts: 81
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #79 on: Sat, 05 September 2020, 20:00:33 »
10 or 8 key. Hm...

Online Blastoise

  • Posts: 52
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #80 on: Sat, 05 September 2020, 20:50:04 »
Good luck everyone! Hopefully, you got the 10. Thatís the way to go  :) :)

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #81 on: Sun, 06 September 2020, 00:59:37 »
Good luck everyone! Hopefully, you got the 10. Thatís the way to go  :) :)
Iíll have some better numbers later but it def seems 8 key was most popular rn



Just about to start on the support emails following the GB - please be patient as there are quite a few. If you need to add anything to your order, or merge a board order and some extras please drop me an email through the contact us form on the site before 8am UK time on Monday. Thatís the cut off for changes.

Raffle will still be drawn today after it closes and winners will be notified via email; with invoices sent on Monday


Sent from my iPhone using Tapatalk Pro

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #82 on: Sun, 06 September 2020, 12:20:04 »
Quick update

Raffle has closed and been drawn

Winners have been notified by email and will be invoiced within 48 hours. Once they receive the invoice they will have 24 hours to pay.

Once all raffle winners are squared away I'll release some overall stats for the GB - in approx a week.


For FCFS Winners, you have about 12 hours remaining to order extras via an email to jae@prototypist.net

Offline Starius

  • Posts: 547
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Standard Edition GB on Sat 05 Sept
« Reply #83 on: Sun, 06 September 2020, 14:00:39 »
Quick update

Raffle has closed and been drawn

Winners have been notified by email and will be invoiced within 48 hours. Once they receive the invoice they will have 24 hours to pay.

Once all raffle winners are squared away I'll release some overall stats for the GB - in approx a week.


For FCFS Winners, you have about 12 hours remaining to order extras via an email to jae@prototypist.net

I know it is FAR too early to even think about such things now, but I'm pretty sure you are going to get Round 2 questions in the future. ;)

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #84 on: Mon, 07 September 2020, 04:32:25 »
ok the window for J-01 FCFS buyers to submit changes/add extras is closed as of now - Any requests I have I'll honour, where possible, but any requests received from now will be declined.

This does not apply to Raffle winners awaiting invoices.

It's going to take me a number of days to get through all the requests - please be patient, I'll confirm via email once your request has been completed

Offline yhs

  • Posts: 59
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #85 on: Mon, 07 September 2020, 04:45:56 »
Very excited for this one!

Offline dRpkebs

  • Posts: 22
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #86 on: Mon, 07 September 2020, 09:59:25 »
I should've ordered an extra pcb.

Sent from my SM-G975U using Tapatalk


Offline Jyobah

  • Posts: 35
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #87 on: Mon, 07 September 2020, 12:28:52 »
Assuming im taking an L on the raffle  :'(

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #88 on: Mon, 07 September 2020, 12:29:34 »
Assuming im taking an L on the raffle  :'(
All the raffle winners got notified - but some did say the mail went to Spam. Always best to check


Sent from my iPhone using Tapatalk Pro

Offline Jyobah

  • Posts: 35
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #89 on: Mon, 07 September 2020, 13:04:51 »
Just double checked but took the L.  There is always next time. Till we meet again  :)

Offline R_Endymion

  • Posts: 5
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #90 on: Mon, 07 September 2020, 14:20:03 »
Assuming im taking an L on the raffle  :'(
All the raffle winners got notified - but some did say the mail went to Spam. Always best to check


Sent from my iPhone using Tapatalk Pro

Glad I saw this comment, I thought I lost and just checked my spam folder and low-and-behold, a winner!

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #91 on: Tue, 08 September 2020, 16:24:08 »
All J-01 support emails have been cleared

All J-01 Invoices have been sent (or you have an email providing next steps needed within the next 24 hours)

If you think I've missed something - please let me know ASAP by emailing jae@prototypist.net.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 728
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #92 on: Tue, 08 December 2020, 05:22:10 »
Production is well underway - just wanted to share some pics I posted in discord for users who are only on GH



Offline hottrout

  • Posts: 916
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [GB] J-01 Rev 1 - Gasket & Macro 65% - Moving towards production
« Reply #93 on: Thu, 10 December 2020, 05:08:07 »
:)
Current Daily Driver : Maja Ergo - Kiwi

Systems
More
Work |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-9900k@5GHz|16GB(3200)|STRIX-RTX2080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|1TB 980 Pro|Dell AW3418DW|NEC MultiSync|Rode NT1&AI-1|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 35 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, games and manuals. 100's of systems including every Amiga model made

Keyboards
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL |  Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Grey | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adťlie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | F&F Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White |