Author Topic: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Shipping]  (Read 25614 times)

0 Members and 1 Guest are viewing this topic.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
[GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Shipping]
« on: Mon, 26 October 2020, 11:15:39 »


Itís happening

Pizza65 and PizzaPCB Group Buy is here!
Response has been massive and we really want to thank you all for the support showed.
Group Buy will be hosted on our own platform starting from Monday 26 at 18:00 GMT and will end the 26 November. All the infos are on the website, www.keyboards.pizza

Here is a summary

About the case:

Seamless, minimalistic design
Top Mount, made of high quality and precisely machined anodized aluminum
7 degrees angle
Plate options
  • 1,5mm aluminum plate (ANSI only)
  • 1,5mm shiny brass plate (ANSI and ISO)
Supports for double backspace and stepped capslock
Supports most of 65% PCBs






About the PCB:
  • HASL-Lead free finish in matte black
  • ESD Protection
  • Overcurrent and Overvoltage protection
  • Powerful STM32 F0 Microcontroller
  • QMK and VIA compatibility
  • Custom front silkscreen





Available colours:
  • Graphite Black
  • Gentiana Blue
  • Pearl Ruby Red




Pricing
All kits comes with a plate, rubberpads, stickers. Brass is available in both ISO and ANSI layouts

Pizza65 Aluminum Kit is 209.99 Ä
Pizza65 Brass Kit is 244.99 Ä
Pizza65 + PizzaPCB Aluminum kit is 249.99 Ä
Pizza65 + PizzaPCB Brass Kit is 284.99 Ä
PizzaPCB also comes standalone at 49.99 Ä
« Last Edit: Sat, 13 February 2021, 14:11:41 by PizzaKeyboards »

Offline fedemito

  • Posts: 45
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #1 on: Wed, 28 October 2020, 06:39:14 »
Nice, good luck!



Offline Ponizu

  • Posts: 6
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #2 on: Wed, 28 October 2020, 08:07:59 »
Nice one! Good luck guys!

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia

Offline E-ant

  • Posts: 7
  • Location: Estonia
  • ISO
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #4 on: Wed, 28 October 2020, 09:43:59 »
In for the blue.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #5 on: Wed, 28 October 2020, 18:38:05 »
We are happy to announce that thanks to the enormous support you are giving us we have been able to find an agreement with our Shipping companies that will allow you to have less expensive shipments for our Pizza pcb all over the world.
So from now on if you are only interested in our pcb you will save a lot (Same with the Stickers or Standalone Plate)  ;D

Offline treeleaf64

  • Posts: 1093
  • Location: In the depths of the forest
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #6 on: Wed, 28 October 2020, 20:16:03 »
Insane price, would buy this if I liked nonsplit layout Hahaha
Leader of the Gateron gang

Disclaimer:
May display immature behavior
May talk in third person

Treeleaf's Youtube Channel!
https://www.youtube.com/channel/UCAVQHinK0K-AjLlbc7MZjfA?view_as=subscriber

Offline Skandiluz

  • Posts: 14
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #7 on: Wed, 28 October 2020, 21:14:01 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #8 on: Thu, 29 October 2020, 02:54:12 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.
We have already ordered a Red prototype, we are waiting for it to arrive to post detailed photos  :thumb:

Offline Dreenok

  • Posts: 4
  • Location: FR
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #9 on: Thu, 29 October 2020, 04:07:44 »
Insane price, would buy this if I liked nonsplit layout Hahaha
Non split layout ? As seen on the IC both layout supports split backspace and stepped capslock

https://geekhack.org/index.php?topic=108537.msg2972346#msg2972346



--
Dreenok

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #10 on: Thu, 29 October 2020, 04:43:35 »
Insane price, would buy this if I liked nonsplit layout Hahaha
Non split layout ? As seen on the IC both layout supports split backspace and stepped capslock

https://geekhack.org/index.php?topic=108537.msg2972346#msg2972346
Yes, as you can see from the images, our plates and pcb support double backspace and stepped capslock both in the ISO and ANSI version  ;D

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #11 on: Thu, 29 October 2020, 11:40:25 »
We have added two more photos to the first post to show you the finish of our Shiny Brass Plate, hope you like it!

Offline Skandiluz

  • Posts: 14
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #12 on: Thu, 29 October 2020, 12:43:41 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.
We have already ordered a Red prototype, we are waiting for it to arrive to post detailed photos  :thumb:

Oh no! Donít do this to me! I canít tell my wife I need yet another keyboard haha. But I mean... I could always use a red keyboard, right?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #13 on: Thu, 29 October 2020, 14:47:08 »
I already ordered the blue but man...the more I look at that red the more I'm thinking I should buy that as well.
We have already ordered a Red prototype, we are waiting for it to arrive to post detailed photos  :thumb:

Oh no! Donít do this to me! I canít tell my wife I need yet another keyboard haha. But I mean... I could always use a red keyboard, right?
You could tell your wife that you just bought a Pizza   :rolleyes: ;D

Offline DuellM

  • Posts: 260
  • Location: Brooklyn
  • Keyboard Fatty
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #14 on: Fri, 30 October 2020, 00:15:47 »
Hi, does anyone know if this will work with a CannonKeys Instant65 PCB?  :-*


Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #15 on: Fri, 30 October 2020, 02:36:19 »
Hi, does anyone know if this will work with a CannonKeys Instant65 PCB?  :-*
Hi looking at the pcb documentation I can tell you that it supports the same layout as ours and has the usb port on the left, so it is very likely that it is compatible!  ;D

Offline DuellM

  • Posts: 260
  • Location: Brooklyn
  • Keyboard Fatty
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #16 on: Fri, 30 October 2020, 09:37:25 »
Hi, does anyone know if this will work with a CannonKeys Instant65 PCB?  :-*
Hi looking at the pcb documentation I can tell you that it supports the same layout as ours and has the usb port on the left, so it is very likely that it is compatible!  ;D
Ok Cool  ^-^


Offline ireverliat

  • Posts: 14
  • Location: Spain
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #17 on: Fri, 30 October 2020, 15:04:31 »
In for the Red one!  :cool:

Offline Chaselicious17

  • Posts: 100
  • Location: Dallas, Tx
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #18 on: Fri, 30 October 2020, 18:13:19 »
In for the Red one!  :cool:
Same! Now we wait...

Offline ainet

  • Posts: 16
  • Location: France
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #19 on: Sat, 31 October 2020, 19:21:55 »
Im sorry that the green didnít make it, blue looks fantastic btw

Offline h3lli0n

  • Posts: 6
  • Location: France
    • oliversphotoblog.com
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #20 on: Sun, 01 November 2020, 04:26:17 »
Hi, do you have a discord server ?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #21 on: Sun, 01 November 2020, 04:59:32 »
Hi, do you have a discord server ?
Hi, yes, here is the invitation link: https://discord.gg/p6CEYThb
But the best way to ask us something and get the answer immediately is to contact us on instagram!  ;D

Offline ywcsam

  • Posts: 49
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #22 on: Sun, 01 November 2020, 20:59:57 »
I feel like "Made in Italy" holds a value for this keyboard and should be engraved at the back somewhere

Offline googley

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #23 on: Mon, 02 November 2020, 21:58:53 »
are there any sample photos of the red?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #24 on: Tue, 03 November 2020, 02:20:56 »
are there any sample photos of the red?
We are waiting for the last red prototype to arrive.
Once arrived we will post the photos both here and on instagram :thumb:

Offline googley

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #25 on: Tue, 03 November 2020, 06:15:04 »
Cool, will keep an eye out on insta  ^-^

Offline idealape

  • Posts: 21
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #26 on: Tue, 03 November 2020, 11:08:07 »
this looks like a really fun keeb.
was considering getting the PCB it for a custom case i want to make from an unusal material.... but the blocker, it just wont work I think.
good luck with the GB!

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #27 on: Tue, 03 November 2020, 14:25:02 »
this looks like a really fun keeb.
was considering getting the PCB it for a custom case i want to make from an unusal material.... but the blocker, it just wont work I think.
good luck with the GB!
Thank you! In case you succeed, don't forget to send us the photos!  ;D

Offline cpt-nic

  • Posts: 19
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #28 on: Wed, 04 November 2020, 04:42:24 »
And some PCB question again:
You stated that matching (and tested) PCBs are the kbd67 rev 2 and the cannonkeys instant65 and that they share the same footprint. These two boards seem to have the usb port more recessed than what is shown for your PCB. Yours looks more similar to the kbd67 mkii pcb.
I'm trying to find out if your PCB might fit in a kbd67mkii where according to kbdfans a kbd67 rev2 or dz65 does not fit - and I think that is because the USB port needs to be more exposed.
Any thoughts on that point?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #29 on: Wed, 04 November 2020, 05:00:32 »
And some PCB question again:
You stated that matching (and tested) PCBs are the kbd67 rev 2 and the cannonkeys instant65 and that they share the same footprint. These two boards seem to have the usb port more recessed than what is shown for your PCB. Yours looks more similar to the kbd67 mkii pcb.
I'm trying to find out if your PCB might fit in a kbd67mkii where according to kbdfans a kbd67 rev2 or dz65 does not fit - and I think that is because the USB port needs to be more exposed.
Any thoughts on that point?
No problem, we are happy to answer everyone.
We made the USB hole on the back of the Pizza65 slightly larger, allowing the majority of cables to pass through so we could mantain compatibility with most PCBs possibles, like the KBD67s that we tested and probably the Instant65, since it have the same layout  :thumb:

Offline posph

  • Posts: 14
  • Location: US
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #30 on: Thu, 05 November 2020, 12:26:01 »
Iím still fighting between the blue and the red!
I donít know if u already said that but will there be a typing test with the brass plate?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #31 on: Thu, 05 November 2020, 14:33:57 »
Iím still fighting between the blue and the red!
I donít know if u already said that but will there be a typing test with the brass plate?
Of course we will do it!
Stay tuned!  ;D

Offline MS85

  • Posts: 18
  • Location: Italy
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #32 on: Sat, 07 November 2020, 05:25:47 »
Aaaaaaaand I'm in for a blue :-)

Buona cottura.



Offline NorrittMTG

  • * Vendor
  • Posts: 44
  • Location: London UK
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #33 on: Sun, 08 November 2020, 14:00:15 »
I'm in for a blue :)
Will be doing an unusual build with the LFKeyboards SMK65 PCB and SMK 2nd Gen monterey switches.
Looking forward to getting the plate file through so i can work on some CF and FR4 plates.
Might have to do a KBD67 MKII PCB half plate flex build too!

exciting GB

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #34 on: Sun, 08 November 2020, 15:06:07 »
I'm in for a blue :)
Will be doing an unusual build with the LFKeyboards SMK65 PCB and SMK 2nd Gen monterey switches.
Looking forward to getting the plate file through so i can work on some CF and FR4 plates.
Might have to do a KBD67 MKII PCB half plate flex build too!

exciting GB
Thank you very much we can't wait to see the result!  ;D

Offline king95

  • Posts: 4
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #35 on: Tue, 10 November 2020, 12:30:54 »
I love the pizza idea, and im waiting for the brass typing test  :D
« Last Edit: Tue, 10 November 2020, 12:34:06 by king95 »

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #36 on: Thu, 12 November 2020, 09:01:08 »
Here is the Pizza65 typing test with our shiny brass plate!
Do you like it?  ;D


Offline Bamboo238

  • Posts: 48
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #37 on: Fri, 13 November 2020, 03:03:49 »
This looks great, if I were not waiting on something quite similar I would have definitely hopped on board!

Offline sup3r170va

  • Posts: 84
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #38 on: Fri, 13 November 2020, 17:47:27 »
What is the weight of the board? Thanks.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #39 on: Sat, 14 November 2020, 03:28:19 »
What is the weight of the board? Thanks.
The weight of the keeb is ~ 1.5 kg for the aluminum kit and ~ 1.7 kg for the brass kit

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #40 on: Mon, 16 November 2020, 13:55:10 »
We received tons of requests for an hot-swap version of our PizzaPCB, and while this canít happen this time we decided to test Mill Max sockets. As expected both 0305 and 7305 variants works great with our Pizza65 and can be a solid choice for converting our solderable PCB in an hot swap one  ;D

Offline acaban

  • Posts: 25
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #41 on: Wed, 18 November 2020, 09:28:46 »
regarding the mounting method, does it support / have you tried small oring between the plate and case? does that makes sense to transmit less vibration to the case and change the sound of typing?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #42 on: Wed, 18 November 2020, 11:46:51 »
regarding the mounting method, does it support / have you tried small oring between the plate and case? does that makes sense to transmit less vibration to the case and change the sound of typing?
Yes we tried to put some orings between the plate and the case, and it slightly improves the already excellent feeling and sound of our Pizza65  ;D

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #43 on: Thu, 19 November 2020, 09:01:25 »
Pizza65 Preorders are ending in a week, the 26 november at 18:00 GMT
To celebrate our successful GB we are giving to a lucky winner a Pizza65 Aluminum Kit + PizzaPCB, completely for free!
Just complete this easy steps:
Plus, if you already placed an order, send us a mail at info@keyboards.pizza using the subject ďgiveawayĒ with your order number, name and Instagram username to get an extra entry, doubling your chances to win!
Giveaway ends this Sunday at 18:00 GMT.
Winner will be randomly extracted on Monday and will choose the color he prefers.
Good Luck!

Offline ihatehumans

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #44 on: Sat, 21 November 2020, 23:42:33 »
Hey so I want to use this board for a build but I wanna use hotswap. I believe you said the Instant65 and kb67 pcbs both work but I want to confirm. Also, screw in stabs work for this right? Im assuming they do but im making sure so I don't seem like an idiot.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #45 on: Sun, 22 November 2020, 04:56:58 »
Hey so I want to use this board for a build but I wanna use hotswap. I believe you said the Instant65 and kb67 pcbs both work but I want to confirm. Also, screw in stabs work for this right? Im assuming they do but im making sure so I don't seem like an idiot.
Yes, both the pcb you have mentioned are compatible with our Pizza65, same thing for the screw in stabs  ;D

Offline ponchofreedo

  • Posts: 32
  • Location: CT
    • personal
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #46 on: Mon, 23 November 2020, 19:32:23 »
also curious about the tolerance on the top mount. would you have enough space to burger mount with some o-ring gaskets between screw/plate and plate/top case?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #47 on: Tue, 24 November 2020, 04:12:57 »
also curious about the tolerance on the top mount. would you have enough space to burger mount with some o-ring gaskets between screw/plate and plate/top case?
It depends on how thick the orings are, from the plate to the bottom of the case there is 1 mm where the screw head is located, you can try to add 2 orings but I don't think you will have any further improvements compared to putting only 1  :thumb:

Offline h3lli0n

  • Posts: 6
  • Location: France
    • oliversphotoblog.com
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #48 on: Thu, 26 November 2020, 02:57:55 »
Hello,

I've seen your packaging prototype on IG (my insta is oliversphotoblog) and I've some thoughts on it :
- In the inside of the top part you could add en engraving in black (bold and normal) italic with italian font such as "Mechanical typing since 2020" sitting on some switches and keycaps sketchs
- I would replace the pizza picture with a dualchrome red and green sketch of a pizza

What do you think ?

Have you managed to build the via firmware for the pcb?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #49 on: Thu, 26 November 2020, 06:36:39 »
Hello,

I've seen your packaging prototype on IG (my insta is oliversphotoblog) and I've some thoughts on it :
- In the inside of the top part you could add en engraving in black (bold and normal) italic with italian font such as "Mechanical typing since 2020" sitting on some switches and keycaps sketchs
- I would replace the pizza picture with a dualchrome red and green sketch of a pizza

What do you think ?

Have you managed to build the via firmware for the pcb?
Hello, thank you for your suggestions but there will be nothing printed inside the box, this is because we want every single component of the Pizza65 to be protected to the maximum so we have decided to cover everything with foam.
Of course we will post all the progress we are making  ;D
For the Via software we are working on it, It will obviously be released before the keyboard arrives

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #50 on: Thu, 26 November 2020, 06:38:42 »
Preorders for Pizza65 ends today at 18:00 GMT.
Thanks to everyone who believed in our project.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #51 on: Thu, 26 November 2020, 12:45:50 »
GB ended production will start shortly thanks  ;D

Offline Gepriester

  • Posts: 32
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #52 on: Thu, 26 November 2020, 19:42:27 »
I just ordered last minute :) is there any estimated shipping date?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #53 on: Fri, 27 November 2020, 01:39:59 »
I just ordered last minute :) is there any estimated shipping date?
Thank you, the shipping is scheduled for mid January  ;D

Offline Cofeg

  • Posts: 3
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #54 on: Mon, 30 November 2020, 18:00:10 »
Ohh nooooooooooooooooooo
Missed it, so sad :(
Do you plan a second run?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #55 on: Tue, 01 December 2020, 17:20:59 »
Ohh nooooooooooooooooooo
Missed it, so sad :(
Do you plan a second run?
For now we have no R2 in mind but in the future we will see, thanks for your interest, we have a little surprise in mind so stay tuned  ;D

Offline Norton

  • Posts: 5
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #56 on: Wed, 02 December 2020, 06:44:25 »
Hi, sorry for the noob question but, does the plate support plate mounted switches? And if I used mil max sockets to convert the pcb what holds the pcb in place?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #57 on: Wed, 02 December 2020, 10:58:36 »
Hi, sorry for the noob question but, does the plate support plate mounted switches? And if I used mil max sockets to convert the pcb what holds the pcb in place?
Hi, yes the Pizza65 supports plate mount switches. MillMax sockets have an internal mechanism that looks like a spring and holds the switches quite tightly so the PCB don't fall off  :D

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #58 on: Wed, 02 December 2020, 14:28:30 »
We finally got the Pizza65 in Pearl Ruby Red, to celebrate and give a chance to those who where waiting for official photos of the red case preorders will reopen a last time for 24 hours:  from tomorrow, 3 December at 18:00 GMT.  Hope you like our best-selling colorway!

Offline Cofeg

  • Posts: 3
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #59 on: Fri, 04 December 2020, 12:04:33 »
Thanks for the opportunity but...
Really dissapointed that the preorder ended before 18:00 GMT.
Was not able to grab it  :(

Is there a chance it will be available again?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #60 on: Fri, 04 December 2020, 16:28:05 »
Thanks for the opportunity but...
Really dissapointed that the preorder ended before 18:00 GMT.
Was not able to grab it  :(

Is there a chance it will be available again?
Sorry but since the production as already started the restock on the site was limited and the demand has exceeded our expectation. Of course there will be more chances in the future.
Thanks for showing interest in our products

Offline Zylkan

  • Posts: 75
  • Location: Portugal
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #61 on: Sun, 13 December 2020, 08:31:07 »
Same here, don't know how I missed it... Hope you'll run it again sometime soooooon !

Offline Norton

  • Posts: 5
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #62 on: Wed, 16 December 2020, 14:06:28 »
Hi again, Can I check the pcb supports screw in stabilisers please?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, Made in Italy
« Reply #63 on: Wed, 16 December 2020, 14:39:06 »
Hi again, Can I check the pcb supports screw in stabilisers please?
Yes our pcb supports screw in stabs  ;D

Offline Curin Derwin

  • Posts: 85
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #64 on: Tue, 22 December 2020, 21:43:32 »
Any room for another blue + some extras?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #65 on: Wed, 23 December 2020, 03:15:41 »
Any room for another blue + some extras?
Sorry but the gb is finished, we plan to stock some ready-to-ship pieces after all the preordered keyboards will be shipped, in february

Offline yuejia

  • Posts: 71
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #66 on: Fri, 25 December 2020, 01:21:23 »
Awesome!!!

Offline yuejia

  • Posts: 71
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #67 on: Sun, 27 December 2020, 19:33:18 »
Itís really Nice!! That is so beautiful!!

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #68 on: Tue, 12 January 2021, 02:40:44 »
Production Update



The current situation in Europe due to covid is not the best, but production is going nicely and soon we will receive the first units.
We already have the Brass plate, PCBs will arrive during the next week and first cases at the end of January, as expected.

In the meantime we have posted another sound test on our youtube channel.
The next step is shipping, we're almost there!
Thank you all for supporting the project.



Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #69 on: Mon, 18 January 2021, 09:12:18 »
We are happy to report that all PCBs have arrived!  ;D

Offline Gepriester

  • Posts: 32
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #70 on: Mon, 18 January 2021, 15:35:43 »
I really enjoy the frequent updates. Thank you Mr. PizzaKeyboards.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #71 on: Thu, 21 January 2021, 08:33:49 »
The packaging has arrived!
We hope you like it  ;D

Offline wompfox

  • Posts: 3
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #72 on: Thu, 21 January 2021, 11:07:30 »
Just saw the full view of the box on instagram. Great job!

Offline 1am_Icy

  • Posts: 16
  • Clickity Clackity
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #73 on: Sat, 30 January 2021, 04:46:45 »
Any plans for future build streams? 

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #74 on: Sun, 31 January 2021, 09:25:37 »
Any plans for future build streams?
We are talking to Taeha about making a build stream.
We will post updates in the future  ;D

Offline Carpelos

  • Posts: 14
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #75 on: Tue, 02 February 2021, 00:48:02 »
Any idea when the shipping is going to begin?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #76 on: Tue, 02 February 2021, 06:32:38 »
UPDATE REGARDING PREORDERS SHIPPING

Unfortunately today we received the news about a small delay regarding our cases shipment. While production ended a few days ago as expected, the company that we hired to QC the production in Germany is receiving the pieces with some delay, due to the rather large volume of the shipment. We expected the Pizza65s to arrive today  here in Italy and to begin ship this week, but this logistics problem are making this impossible. We are speeding up the orders preparation starting right now so when we will receive the quality checked parts in a few days everything will be ready to be despatched in the fastest way.
We are very sorry, our first project seemed so close to go as expected and this is a big disappointment for us. We planned some delay from the beginning to try to bring you the preorders even before but COVID-19 and this kind of last minute shipment issues didnít help. We ask you to hang tight just a few extra days.

Offline vrapan

  • Posts: 26
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #77 on: Tue, 02 February 2021, 06:37:35 »
UPDATE REGARDING PREORDERS SHIPPING

Unfortunately today we received the news about a small delay regarding our cases shipment. While production ended a few days ago as expected, the company that we hired to QC the production in Germany is receiving the pieces with some delay, due to the rather large volume of the shipment. We expected the Pizza65s to arrive today  here in Italy and to begin ship this week, but this logistics problem are making this impossible. We are speeding up the orders preparation starting right now so when we will receive the quality checked parts in a few days everything will be ready to be despatched in the fastest way.
We are very sorry, our first project seemed so close to go as expected and this is a big disappointment for us. We planned some delay from the beginning to try to bring you the preorders even before but COVID-19 and this kind of last minute shipment issues didnít help. We ask you to hang tight just a few extra days.

Don't sweat it, it is fascinating to me that you managed such a short time scale from pre-orders to delivery I was prepared for month long delays. If you deliver even a month late you are still faster than 99% of group buys.

On another note how do we know if we are into the pre-orders batch?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #78 on: Tue, 02 February 2021, 09:34:05 »
UPDATE REGARDING PREORDERS SHIPPING

Unfortunately today we received the news about a small delay regarding our cases shipment. While production ended a few days ago as expected, the company that we hired to QC the production in Germany is receiving the pieces with some delay, due to the rather large volume of the shipment. We expected the Pizza65s to arrive today  here in Italy and to begin ship this week, but this logistics problem are making this impossible. We are speeding up the orders preparation starting right now so when we will receive the quality checked parts in a few days everything will be ready to be despatched in the fastest way.
We are very sorry, our first project seemed so close to go as expected and this is a big disappointment for us. We planned some delay from the beginning to try to bring you the preorders even before but COVID-19 and this kind of last minute shipment issues didnít help. We ask you to hang tight just a few extra days.

Don't sweat it, it is fascinating to me that you managed such a short time scale from pre-orders to delivery I was prepared for month long delays. If you deliver even a month late you are still faster than 99% of group buys.

On another note how do we know if we are into the pre-orders batch?
Thanks for the wonderful words, we try to do our best!
The keyboards will be shipped all together  ;D

Offline h3lli0n

  • Posts: 6
  • Location: France
    • oliversphotoblog.com
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #79 on: Tue, 02 February 2021, 10:50:32 »
Few days are nothing and in my case I'll be sitting in front of a keyboard without keycaps  :-[ !! You're faster than I was expected for the build time !  :-\

Offline Sethosaurus

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #80 on: Tue, 02 February 2021, 17:52:50 »
Still more excited than ever to receive it! Holy pandas, Smoked Durock stabs, and GMK WoB are waiting for it!

Seriously though, this is much quicker than any other GB. A few days, or even weeks of delay aren't anything to be angry about. Thank you for your transparency! <3

Offline qq6681585

  • Posts: 13
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #81 on: Tue, 02 February 2021, 21:32:05 »
ItísreallyNice!!

Offline Bamboo238

  • Posts: 48
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #82 on: Wed, 03 February 2021, 01:37:14 »
UPDATE REGARDING PREORDERS SHIPPING

Unfortunately today we received the news about a small delay regarding our cases shipment. While production ended a few days ago as expected, the company that we hired to QC the production in Germany is receiving the pieces with some delay, due to the rather large volume of the shipment. We expected the Pizza65s to arrive today  here in Italy and to begin ship this week, but this logistics problem are making this impossible. We are speeding up the orders preparation starting right now so when we will receive the quality checked parts in a few days everything will be ready to be despatched in the fastest way.
We are very sorry, our first project seemed so close to go as expected and this is a big disappointment for us. We planned some delay from the beginning to try to bring you the preorders even before but COVID-19 and this kind of last minute shipment issues didnít help. We ask you to hang tight just a few extra days.

Definitely don't be hard on yourselves. You have handled this GB exceptionally well, and unexpected delays like this are to be expected. Especially in the situation we are in at the moment in Europe.

Offline obrid29

  • Posts: 2
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #83 on: Wed, 03 February 2021, 10:43:02 »
Hi the discord link seems to not be working? Can you send another one?

Offline spoopycheezy

  • Posts: 16
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #84 on: Wed, 03 February 2021, 10:49:28 »
very reasonable pricing. i like it. love the sharp angles and defining bevel.

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #85 on: Wed, 03 February 2021, 13:37:24 »
Hi the discord link seems to not be working? Can you send another one?
Yes, there you go
https://discord.gg/5t2M3shs

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Manufacturing]
« Reply #86 on: Fri, 12 February 2021, 15:59:00 »
Guys, it's about to happen.
Finally we have received all the goods and we are ready to start preparing every single order of yours!
Starting next week we will get to work to ship everything as soon as possible.

Offline vrapan

  • Posts: 26
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Shipping]
« Reply #87 on: Wed, 17 February 2021, 05:49:12 »
Hi the discord link seems to not be working? Can you send another one?
Yes, there you go
https://discord.gg/5t2M3shs

that doesn't work for me any chance for a new one?

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia

Offline PizzaKeyboards

  • Thread Starter
  • Posts: 110
  • Location: Italia
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Shipping]
« Reply #89 on: Thu, 18 February 2021, 09:57:26 »
Since in a few days you will receive your Pizza65 we have created a guide on how to use VIA on Pizza65/PizzaPCB while waiting QMK to merge our request.
Here is the link: https://keyboards.pizza/blogs/news/how-to-use-via-on-pizza65-pizzapcb-while-waiting-qmk-to-merge-our-request
Have a good day!  ;D

Offline vrapan

  • Posts: 26
Re: [GB] Pizza Keyboards Pizza65 | Minimal Top-Mount 65%, [Shipping]
« Reply #90 on: Wed, 24 February 2021, 14:11:30 »
so i made a stupid mistake and bought a rev2 instead of an MKII Kbdfans 67 and the one I bought is not hotswap and not wanting to solder i got thinking and here is the question. Would the Drop ALT pcb work in the Pizza?