Author Topic: [IC] Theca x Rubrehose | Final Pricing Update!  (Read 23131 times)

0 Members and 1 Guest are viewing this topic.

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
[IC] Theca x Rubrehose | Final Pricing Update!
« on: Sat, 21 May 2022, 03:09:42 »
Theca x Rubrehose by Densus Design & KLC





More Pictures
More


Pics taken by jtqx#8261, @joshkeyboards on instagram


My Discord My Instagram
KLC's Discord KLC's Instagram

 


Board Features:

- F12 WKL or WK TKL layout with ANSI and ISO Support
- 18mm front height without feet
- 2.8KG Built
- Custom Silicone Gasket Mount or Top Mount
- 8-degree typing angle
- “Seamless” Sides
- Recessed USB-C port parallel to your desk
- Internal Brass Weight
- External Stainless Steel or Brass Weight
- MX or Topre PCB



Pricing Update:
More
Pricing Update:

Note: Kit doesn't include PCB, KLC will be stocking both Hotswap and Soldered PCBs on their store. The board will come with Daughterboard and JST Cable. The board is also compatible with most 87 layout PCBs that have a JST Connector.

You will be able to choose between Stainless Steel and Brass for the external weight, the internal weight is brass and cannot be changed. All weights are clear coated.

Plates: Aluminium, Carbon Fiber and PC will be available in Full Plate.
Black Ano will have a RED Alu Plate
E-Beige and Brown will have a Black Alu Plate

- Base Kit  ~ 520USD
(no upcharge for e-beige)

- Carbon Fiber Plate ~ 35USD
- PC Plate ~ 35USD

What is included in the base kit:
- Top
- Bottom
- Plate
- Internal Weight
- External Weight
- Daughterboard + JST Connector
- 8x 30A Gaskets
- Top Mount Screws

Topre Kit ~ Pricing Still Pending
Will include:
- Plate
- PCB
- Screws + Standoffs


Updates: (As of 7/6/22)

- We have decided to only include 30A hardness for the gaskets due to the harder 50A gaskets feeling the same as top mount and with the compression, its much harder to assemble the case.

- We will also remove the internal mounting point due to the interference of Topre housings. Instead we have chosen to use a magnet for the middle screw point. All the other screws will remain unchanged.

- Internals have been updated, colour options have also been finalised with Black, Brown and E-Beige! Larger prototype order will be placed in the next few days!


- 20A gaskets have been ordered and will be compared with the current 30A gaskets.



Mounting:
 

V1 Gaskets Left, V2 Gaskets Right. Only 30A in Black (matte) for final production.

Theca can be mounted in two ways: Top Mount or Gasket Mount.
Unlike most other gasket mounted boards, Theca utilizes custom injection moulded silicone gaskets to achieve a smooth and flexible typing experience, accompanied by the recessed areas on the bottom case for increased flex.
 
After manufacturing and testing prototypes using different gasket thicknesses, I am extremely satisfied with the resulting typing feel and flex. Gaskets will be available in only 1 hardness: 30A Durometer (Black). Due to the lack of adhesive between the gaskets and plate/case, harnesses can be seamlessly installed and swapped without frustration or clean-up.
 
As well as this, Theca can also be mounted to the top case using 8 screws for a more classic typing feel.




Topre Addon Kit:




For Theca, we will be offering an addon kit for topre compatible parts, this kit will include PCB, plate, standoffs and screws. Designed by the Talented Cipulot, this pcb allows for multi-layout options including 7u & 6.25u bottom rows along with stepped and regular capslock. The plate also allows the use of 6u spacebar wires for those that want to use keycaps straight from a realforce board. Above are some pictures of the PCB with artwork by Rubrehose!



Internals:




Theca's Internals have been updated since the initial prototype, this will provide a cleaner look and should give a more even sound.

Please note that all brass weights will be clear-coated.



Included Carry Case:




More




This premium carry case included with Theca has been designed to make it easy to place and pick up boards with wide side openings for hands. This bag uses two custom moulded eva parts to hold Theca while also separating extra parts such as plates, PCBs and extra gaskets. Sponge foam has been glued to the top of the case to prevent damage during shipping and daily use.



Colours Available:
Black Ano, Brown Ano (same as rotor) & E-Beige (E-coating)



PCB & Layouts



While Theca will not include a PCB in the kit, it will include a DB and JST Cable. Theca is compatible with 3rd party PCBs as long as they have a JST connector and are without a usb c port. The plate is compatible with north or south facing stabilisers an supports a number of layout options listed below!

- Winkeyless or Winkey
- ANSI and ISO Support
- Regular and Split Backspace Support
- Regular and Split Left and Right Shift Support
- Regular and Stepped Caps Support
- 6.25u & 7u bottom row options
 



Build Stream(s) and Typing Tests

Will be posted here once made.

 


Whats Included + Pricing:
 
Theca Kit Price: 520USD

- Top and Bottom Case (6063)
- Internal Brass Weight (Sandblasted + Clear coated)
- External Weight in Stainless Steel (316) (Sandblasted) OR
Brass (Sandblasted + Clear coated)
 
- Red Aluminium Plate with Gasket & Top Mounting Points (5052)
- Daughterboard + JST Cable
 
- 8x 30A Custom Moulded Silicone Gaskets
- Screws for Top Mount
- 4x Rubber Feet
- Custom Moulded EVA Carry Case + EVA Tray




Extras Available:
 
Carbon Fiber Plate
PC Plate
Extra Gaskets
[/size]

« Last Edit: Thu, 30 June 2022, 02:23:19 by densus designs »

Offline Invezting

  • Posts: 48
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #1 on: Sat, 21 May 2022, 03:11:37 »
This is dope

Offline ankit-sachdeva

  • Posts: 226
  • discord.gg/ankit
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #2 on: Sat, 21 May 2022, 03:12:38 »
What does the plate look like?

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #3 on: Sat, 21 May 2022, 03:14:52 »
What does the plate look like?

Ill add a photo of the plate now!

Offline darthcapn

  • Posts: 263
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #4 on: Sat, 21 May 2022, 03:19:18 »
Hottieeee! Looks so good.
Praxis | Portal | Frog F13 | Vega | Sat75 | F2-84 | Iron 165 | KFE CE | Spring | Pandora | Mr Suit | MGA | Jelly Epoch

Dolice | Glare | Vmax chyuu | W1-AT | Hoshizora | iron 160 | Nazaré | Tomo

Offline ankit-sachdeva

  • Posts: 226
  • discord.gg/ankit
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #5 on: Sat, 21 May 2022, 03:20:38 »
.
« Last Edit: Fri, 02 September 2022, 18:25:41 by ankit-sachdeva »

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #6 on: Sat, 21 May 2022, 03:24:28 »
Thank you for the feedback, I can post some more photos shortly as well as an ic form for plates and colours.

Offline chat and team

  • Posts: 138
  • Location: Towson, Maryland
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #7 on: Sat, 21 May 2022, 03:28:21 »
cool and all but we all already know this is going to be 500+
geekhack mods constantly break tos and refuse to read
Chinese overlords won

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #8 on: Sat, 21 May 2022, 03:30:43 »
cool and all but we all already know this is going to be 500+

Again, pricing has not been decided but this is 2.8kg built with 2 different weights and 3 different materials depending on configuration.

Offline Sissy

  • Posts: 490
  • Location: Australia
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #9 on: Sat, 21 May 2022, 03:40:28 »
Aw yea very nice. Only real downside I see is not a universal PCB but not the biggest issue

Offline DubbTom

  • Posts: 44
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #10 on: Sat, 21 May 2022, 03:41:10 »
Brown please. Tyvm
poker II

Offline arium

  • Posts: 1
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #11 on: Sat, 21 May 2022, 06:30:41 »
beige and brass pls

Offline finalarcadia

  • Posts: 387
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #12 on: Sat, 21 May 2022, 08:32:02 »
Awesome <3 Rubrehose

Sent from my SM-S908U1 using Tapatalk


Offline Bub

  • Posts: 362
  • Location: MD, USA
    • big bub's beepers
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #13 on: Sat, 21 May 2022, 08:47:16 »
interested in e-beige. got any more photos?

please consider trying to run small duration unlimited GB over raffle

Offline superjackie

  • Posts: 73
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #14 on: Sat, 21 May 2022, 11:53:55 »
what layout does hotswap pcb support? fixed ansi only(stepped cap?), or iso hotswap possible?

Offline sirieous

  • Posts: 231
  • help
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #15 on: Sat, 21 May 2022, 13:34:13 »
Neat weight

Offline forgiivn

  • Posts: 1
  • Location: USA
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #16 on: Sat, 21 May 2022, 14:37:49 »
Very nice, can't wait!

Offline Kinesiologist

  • Posts: 217
  • Location: Canada
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #17 on: Sat, 21 May 2022, 17:30:37 »
hope to see more color options, love the design tho

Offline audax989

  • Posts: 931
  • Location: Guam
  • NOM NOM NOM
    • Guam Mechanical Keyboards
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #18 on: Sat, 21 May 2022, 19:19:33 »
Silver and Brass would be a killer combo with deadbeats! 100% in!

Offline Sandy

  • Formerly cogitoergofemme
  • Posts: 151
  • Location: Orlando, FL
  • Sandy - Peach Tray Maker
    • the peach · studio
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #19 on: Sat, 21 May 2022, 19:59:19 »
Props to you and chad on this! Very intresting internals love to see it.
🍑C11🍑KWA.6🍑GPK60 47-GR1RE🍑Vast60🍑Rose60🍑EHKB🍑Viktus Sinne🍑Boop65🍑Jelly60 Pro🍑Fuji65🍑Ginkgo 65🍑S7.7🍑Treasure Type-9 II🍑Thermal R2🍑Jelly 60🍑


Offline Xanira

  • Posts: 101
  • Location: bed
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #20 on: Sat, 21 May 2022, 20:10:33 »
gib

Offline ARSLOCK

  • Posts: 228
  • Location: SC
  • CarolinaMech.com
    • Carolina Mech
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #21 on: Sat, 21 May 2022, 20:16:33 »
How many units available?

Offline lionblinds

  • Posts: 29
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #22 on: Sat, 21 May 2022, 20:37:20 »
Cool,wish that would be an unlimited GB

Offline kbye

  • Posts: 58
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #23 on: Sat, 21 May 2022, 21:05:02 »
Didn’t think I’d want another TKL but here I am. Looking great so far

Offline dantambok

  • Posts: 941
  • Location: Goutland
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #24 on: Sat, 21 May 2022, 21:36:47 »
dank weight design!
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / TGRxSinga Unikorn R1 / Unikorn 2.1 / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / 2x Matrix 2.0 ADD / TGR Police / Noxary XRF / Noxary Vulcan Pro / 350 Mimi / Matrix Falcon / Matrix 2.0CP / Kira80 / Exent 65% / FMJ60 / Haus / 2x Kikuichimonji / Cake 60 / 2x AU Unikorn / Dolphin 2021 / 2x LZ XE / Paraluman 60 / Andromeda / Pearl Pandora60 / Dalco 959 Mini GT / LZ Erghost /  Finder Works Hyphen / Kohaku / MONOKEI x TGR Tomo

Coming --   Lynx50 (wixx scammed us) / 2x GSKT-00 / Valhalla / 2x Dolice / Ibis  / Lin EM8 / Poly TKL One / LZ REs / RS60 / Ladybird60 / RBB / GAF910 / FLX Virgo r2


Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #25 on: Sat, 21 May 2022, 22:23:55 »
IC Form has been posted.

IC Form

Depending on Interest, we are looking into a limited run of WK tops.

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #26 on: Sun, 22 May 2022, 02:16:37 »


For those that wanted to see what e-beige looks like, here is e-beige on a new lin whale!

interested in e-beige. got any more photos?

please consider trying to run small duration unlimited GB over raffle


Offline rmendis

  • Posts: 404
  • Artisan addict
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #27 on: Sun, 22 May 2022, 10:04:59 »

Offline catamscott

  • Posts: 280
  • Location: Oregon
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #28 on: Sun, 22 May 2022, 12:15:40 »
very nice! mounting looks good and gasket socks over separate strips is nice, weight looks nice and the internal cuts look neat. that e-beige is hot too. really interested in seeing how this turns out  :thumb:

edit: topre kit would be really really cool too!
« Last Edit: Sun, 22 May 2022, 14:30:47 by catamscott »

Offline Nonnegaard

  • Posts: 323
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #29 on: Sun, 22 May 2022, 14:07:05 »
this is extremely hot
TGR Jane V2, Keycult No. 1/TKL, Dolphin 2021, Melody65, Gherkin, Model M, 5°, NCR80, M0110-A

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #30 on: Mon, 23 May 2022, 01:05:57 »
Hello, Just wanted to answer a few questions and some feedback from the IC form.

1. This board will not be offered in F13, only F12.

2. Soldered will be the default PCB, Hotswap will be available as an add-on.

3. KLC will be the only vendor of this board.

4. More plates will be added and tested. So far we have: Aluminium, Carbon Fiber & FR4. PC and POM are still being decided.

5. Half plates will also be available, still haven't decided on what materials, no plastic ones will be offered.

6. No polished weight options will be added.

7. No more colours options will be added.

8. Winkey option will be available, depending on interest it may be only available in certain colours.

9. Thank you for the great interest in the topre kit. Currently the prototype plate is being made and the pcb is still in the design phase. After testing we will see if  it can be offered with this board.

Thank you again for the overall high interest in this keyboard!

Offline SDKCAMPING

  • Posts: 168
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #31 on: Mon, 23 May 2022, 02:10:50 »
I'm a fan, and the price is better than most TKLs now too, following
Blue Gray Ciel 60 with BCPs | E-white 7V (plateless) with Aqua Kings

Offline Adelscott

  • Posts: 259
  • Location: ISO-FR
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #32 on: Mon, 23 May 2022, 04:06:23 »
I'm a fan, and the price is better than most TKLs now too, following

Where did you see the price ?

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #33 on: Mon, 23 May 2022, 04:36:43 »
I'm a fan, and the price is better than most TKLs now too, following

Where did you see the price ?

It was posted briefly but removed it as it was very rough. I had wrote 450-550usd.
« Last Edit: Mon, 23 May 2022, 04:39:27 by densus designs »

Offline UGunaLOSE

  • Posts: 105
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #34 on: Tue, 24 May 2022, 12:43:26 »
PogChimp

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #35 on: Mon, 30 May 2022, 03:12:46 »
Update 30/5/22:

We have decided to only include 30A hardness for the gaskets due to the harder 50A gaskets feeling the same as top mount and with the compression, its much harder to assemble the case.

We will also remove the internal mounting point due to the interference of Topre housings. Instead we have chosen to use a magnet for the middle screw point. All the other screws will remain unchanged.

Offline LegendsWorks

  • Posts: 50
  • thocc
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #36 on: Mon, 30 May 2022, 04:49:02 »
Looks good, I'm not sure if I missed it but is there INFO on the colors that will be avail?

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #37 on: Mon, 30 May 2022, 05:29:43 »
Looks good, I'm not sure if I missed it but is there INFO on the colors that will be avail?

4 colours are currently mentioned, Black and E-Beige are confirmed but are still deciding between silver and brown (currently tied on IC form)

Offline DJ Clicks

  • Posts: 38
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #38 on: Mon, 30 May 2022, 07:25:54 »
Is it possible to have the option to choose solder or hotswap instead of being forced to get solder and buying hotwap as extra? Also would hotswap be cem3 as well?

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #39 on: Mon, 30 May 2022, 07:45:56 »
Currently pcb options wont change, both cem3

Offline mvkb

  • Posts: 170
  • Location: Belgium
  • Designer
    • MVKB
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #40 on: Mon, 30 May 2022, 07:56:53 »
We will also remove the internal mounting point due to the interference of Topre housings. Instead we have chosen to use a magnet for the middle screw point. All the other screws will remain unchanged.

Does this mean 3rd party PCB's will fit?

Love all the updates you've been posting here, might want to update the top post with all the new details 🙂

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Premium TKL with Dual Mounting!
« Reply #41 on: Mon, 30 May 2022, 08:18:15 »
We will also remove the internal mounting point due to the interference of Topre housings. Instead we have chosen to use a magnet for the middle screw point. All the other screws will remain unchanged.

Does this mean 3rd party PCB's will fit?

Love all the updates you've been posting here, might want to update the top post with all the new details 🙂

Yes it does now! as long as the pcb has a jst connector it should be fine, havent tried any south facing stabs though.
Thank you,
I will be updating the thread now!

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #42 on: Tue, 07 June 2022, 07:49:39 »
7/6/22 Update:

- Internals have been updated, grooves removed, brass weight covers DB channel.
- Final colour options have been decided: Black Ano, Brown Ano (same as rotor) & E-Beige.
- IC form closed
- Larger proto order will be placed in the next few days for build streams!

Offline yukitoki

  • Posts: 54
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #43 on: Tue, 07 June 2022, 13:13:23 »
Thank you for the updates.

Offline Diggidy

  • Posts: 103
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #44 on: Wed, 08 June 2022, 04:39:53 »
Please consider a non-engraved weight option.

I like the board, and am super interested in the topre addition; however, the weight design is very cartoonish to me and a complete turn off.

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #45 on: Wed, 08 June 2022, 05:25:27 »
Please consider a non-engraved weight option.

I like the board, and am super interested in the topre addition; however, the weight design is very cartoonish to me and a complete turn off.

Thank you for the feedback but there won't be a non engraved version.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12181
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #46 on: Wed, 08 June 2022, 22:13:58 »
Please consider a non-engraved weight option.

I like the board, and am super interested in the topre addition; however, the weight design is very cartoonish to me and a complete turn off.

Thank you for the feedback but there won't be a non engraved version.

nice
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE | Revo One | z | Keycult No. 1 | AIS65 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geonworks Frog | Hiney TKL One



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline rmendis

  • Posts: 404
  • Artisan addict
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #47 on: Wed, 08 June 2022, 22:48:04 »
7/6/22 Update:

- Internals have been updated, grooves removed, brass weight covers DB channel.
- Final colour options have been decided: Black Ano, Brown Ano (same as rotor) & E-Beige.
- IC form closed
- Larger proto order will be placed in the next few days for build streams!
Show Image


Awesome! Is brown anno the same as this: https://imgur.com/a/uQVvS9B ?

Offline densus designs

  • Thread Starter
  • Posts: 89
  • Location: inside gater ron mouth
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #48 on: Wed, 08 June 2022, 22:51:22 »
7/6/22 Update:

- Internals have been updated, grooves removed, brass weight covers DB channel.
- Final colour options have been decided: Black Ano, Brown Ano (same as rotor) & E-Beige.
- IC form closed
- Larger proto order will be placed in the next few days for build streams!
Show Image


Awesome! Is brown anno the same as this: https://imgur.com/a/uQVvS9B ?

Yes it is, that was the first prototype of Rotor and it wasn’t perfectly matched to the correct pantone. Here is the link the final prototype that is patched well.
https://www.instagram.com/p/CYicBB9vayX/

Offline granola bar enthusiast

  • Posts: 296
  • Location: USA
Re: [IC] Theca x Rubrehose | Colour Options Finalised, Updated internals!
« Reply #49 on: Thu, 09 June 2022, 09:28:38 »
KBD67 lite and many other boards that use silicone gaskets had an extremely stiff feel and the silicone did not help the boards in the slightest, how is the flex on this board?