Author Topic: [IC] Pluto - FRL with Dual Mounting - In PreOrder  (Read 22965 times)

0 Members and 1 Guest are viewing this topic.

Offline bordboards

  • Posts: 30
Re: [IC] Pluto - FRL with Dual Mounting
« Reply #50 on: Mon, 13 March 2023, 21:44:09 »
liking the simplicity of it all. GLWIC!

Offline saab

  • Thread Starter
  • Posts: 42
Re: [IC] Pluto - FRL with Dual Mounting
« Reply #51 on: Wed, 15 March 2023, 01:36:33 »
hey there are a few things I am missing and hope that will get updatd before the Pluto (I know its in a early stage of IC) goes into GB.
pictures of the protos so we know what the product looks irl instead of renders. Renders are one thing, but seeing actual protos are another one. My concern comes from keycap renders that in the past had problems matcing the renders. So I would apreciate actual proto pics.
the next thing would be the PCB, are there flexcuts? I didnt find that on the kbdfans IC nor here. Would love to know if it has or doesnt have cuts. And if it has cuts then I would like to know where.

Hi, yes the prototype is almost done. Iíll share the pictures here and in my discord when i get the chance to do so. The pcb will have 0 flex cuts.

Offline amillie

  • Posts: 6
Re: [IC] Pluto - FRL with Dual Mounting
« Reply #52 on: Wed, 15 March 2023, 11:15:27 »
Do I need another keyboard? No. Do I really want this bc I'm a sucker for pretty things? Yes. Following this closely from now on.

Offline Sieglinde

  • Posts: 32
Re: [IC] Pluto - FRL with Dual Mounting
« Reply #53 on: Thu, 16 March 2023, 11:54:40 »
hey there are a few things I am missing and hope that will get updatd before the Pluto (I know its in a early stage of IC) goes into GB.
pictures of the protos so we know what the product looks irl instead of renders. Renders are one thing, but seeing actual protos are another one. My concern comes from keycap renders that in the past had problems matcing the renders. So I would apreciate actual proto pics.
the next thing would be the PCB, are there flexcuts? I didnt find that on the kbdfans IC nor here. Would love to know if it has or doesnt have cuts. And if it has cuts then I would like to know where.

Hi, yes the prototype is almost done. Iíll share the pictures here and in my discord when i get the chance to do so. The pcb will have 0 flex cuts.

Hey, since we couldn't get a clean top with the Hira (no engraving) do you think it can be possible with Pluto?

Offline saab

  • Thread Starter
  • Posts: 42
Re: [IC] Pluto - FRL with Dual Mounting
« Reply #54 on: Thu, 16 March 2023, 12:23:39 »
Unfortunately not, as a designer I am getting more and more experience with working with vendors and other companies. They tend to limit your choices.

Offline yoga_huang

  • Posts: 1
Re: [IC] Pluto - FRL with Dual Mounting (Prototype Pics)
« Reply #55 on: Wed, 22 March 2023, 12:51:05 »
i like no name plate design

Offline chancellorr

  • Posts: 83
  • Location: Michigan
Re: [IC] Pluto - FRL with Dual Mounting (Prototype Pics)
« Reply #56 on: Wed, 22 March 2023, 20:50:18 »
This is my favorite FRL board I think I've ever seen.

Offline fuster

  • Posts: 9
Re: [IC] Pluto - FRL with Dual Mounting (Prototype Pics)
« Reply #57 on: Tue, 04 July 2023, 19:12:40 »
Where the soundtest at????

Offline yz

  • Posts: 26
  • Location: shostudios.co
Re: [IC] Pluto - FRL with Dual Mounting (Prototype Pics)
« Reply #58 on: Fri, 07 July 2023, 06:43:16 »
polished accent under the nav cluster looks super clean, would prefer it without the engraving too but can appreciate it nonetheless. glwic!

Offline adsfqwer

  • Posts: 41
Re: [IC] Pluto - FRL with Dual Mounting - In PreOrder
« Reply #59 on: Tue, 12 September 2023, 19:17:47 »
Did this happen already? I don't see GB page and OP photos are gone. Hmm...

Offline tacahiroy

  • Posts: 35
Re: [IC] Pluto - FRL with Dual Mounting - In PreOrder
« Reply #60 on: Tue, 12 September 2023, 21:02:46 »
Did this happen already? I don't see GB page and OP photos are gone. Hmm...
Yes, it's done and they are now in stock here.
https://kbdfans.com/products/pluto

Tapatalk を使用して私の Pixel 4a から送信


Offline adsfqwer

  • Posts: 41
Re: [IC] Pluto - FRL with Dual Mounting - In PreOrder
« Reply #61 on: Wed, 13 September 2023, 13:35:20 »
Thanks. Every combination I've tried seems to be sold out. Too bad I missed it.

Offline NihonCK

  • Posts: 67
Re: [IC] Pluto - FRL with Dual Mounting - In PreOrder
« Reply #62 on: Wed, 13 September 2023, 22:34:16 »
Thanks. Every combination I've tried seems to be sold out. Too bad I missed it.

There are plenty of the aluminum models still in stock, unless you want the Jade color

the brass ones sound out during the pre-order

Offline adsfqwer

  • Posts: 41
Re: [IC] Pluto - FRL with Dual Mounting - In PreOrder
« Reply #63 on: Thu, 14 September 2023, 22:03:15 »
Thanks. Every combination I've tried seems to be sold out. Too bad I missed it.

There are plenty of the aluminum models still in stock, unless you want the Jade color

the brass ones sound out during the pre-order

Indeed. It looks like I ran into a glitch the other day. Checking again I see the stock amounts and I'm able to add to my cart. However, the pricing is all wrong. My PCB, plate and extras aren't being added to the basic kit price. Yet they are listed in my cart.

It's my first time on kdbfans. Maybe I'm not understanding something.

Offline HappyB0T

  • Posts: 432
  • Location: Midwest, USA
  • I'm a Piggie
Re: [IC] Pluto - FRL with Dual Mounting
« Reply #64 on: Thu, 14 September 2023, 22:48:01 »
..
« Last Edit: Fri, 15 September 2023, 07:35:29 by HappyB0T »