Author Topic: [IC] Dune65(GB has started on vendors)  (Read 16427 times)

0 Members and 1 Guest are viewing this topic.

Offline kenny_25

  • Thread Starter
  • Posts: 9
[IC] Dune65(GB has started on vendors)
« on: Thu, 11 July 2024, 05:32:45 »
GB has started on vendors,12 Sep, 2024 - 15 Oct, 2024

Hello everyone, I am Kenny from Grit.
Introducing Dune 65, a 65% keyboard kit with an elegant design and excellent typing experience.

 

Exterior Design:
The inspiration for Dune 65 comes from the lines formed under the action of wind on sand dunes (see the image below: sourced from the internet, contact for removal if copyright infringement).
Our goal for the board design is to be aesthetically pleasing while maintaining simplicity.
Therefore, we have removed elements such as logos and text, starting from the most basic points, lines, and surfaces.
The interwoven lines on the back can represent either deserts stretching to the horizon or layers of sand dunes, allowing everyone to enrich its meaning through their imagination.

 
Based on the initial design drawings, we adjusted the overall thickness, typing angle, and front height.
We also reconstructed the lines at the back, optimizing the overall visual effect.
While ensuring the appropriate bottom case thickness and enough bottom clearence, we minimized the front height and EKH (Edge Key Height) as much as possible.
The typing angle is set at 8° to achieve a more comfortable typing experience.
Prototype Pics:



   


Basic Information:
- Layout: 65%, 6.25U WK Layout/ 7U WKL Layout
- Typing angle: 8°
- Front Height: 16.5mm
- EKH: 21.59mm
 
 


Supported Layout
Hotswap:


Solder:


Mounting Styles and Internals:


 
The dual mounting style design of the internal brings high playability to the keyboard.
We continue to use the dual mounting style on Dune 65 and have made further improvements.

For the Top mount, we adopted the Leaf Spring Top Mount and adjusted the arrangement of the lower edge plate springs to ensure a consistently excellent inner shell feel and a crisp and pleasing spacebar sound.
For the Gasket structure, to achieve a solid typing experience, we abandoned the leaf spring structure and adopted a silicone Gasket Mount.

In terms of PCB, it will be using a 1.6mm black core board without flex-cuts.
This internal design ensures a clean sound even without foam.

For the bottom case, we chose brass as the high-density material and kept as is.
We placed the small board and battery compartment inside the weight to make the bottom chamber flat and the bottom shell thickness uniform, resulting in a purer and more solid sound feedback.


Keyboard Information
Mounting Style: Leaf Spring Top Mount / Gasket Mount
PCB: 1.6mm black core
Firmware: QMK/VIA Supported Solder & Hotswap PCB
Plate: Aluminum, extra Alu Half Plate
Plate file will be public after GB ends

Top Case Material: 6063 Aluminum
Bottom Case Material: Brass
Weight Material: 6063 Aluminum
Top Case and Weight Surface Treatment: Anodization
Bottom Case Surface Treatment: Transparent E-Coat


Group Buy Colors (Prototype Pics):
- Moonlight (Silver)

- Deep Sky (Gray)
   
- Sand (Sand Gold)

- Emerald (Green)

- Midnight (Blue)

- Crimson (Red)

- Rose (Rose Gold)


For more prototype Photos, feel free to check out the below album
Scene: https://imgur.com/a/wGji7Mm
Colors: https://imgur.com/a/Em3R4qE
New Album: https://imgur.com/a/changes-compared-8fMdkFC

Minor changes to the international units




Vendors:
Geon Works
 KBDFans
 Keyspensory

Projected Price Point: $350 + Shipping

DC Invite Link: https://discord.gg/tpENfnabV9

« Last Edit: Tue, 08 October 2024, 19:39:52 by kenny_25 »

Offline azhdar

  • Praise the AZERTY god
  • Posts: 2444
  • Location: France
  • 65% Enlightened
Re: [IC] Dune65
« Reply #1 on: Thu, 11 July 2024, 05:50:31 »
Been looking for a WKL 65% for a while and this look gorgeous.
Will follow this project.
Azerty Propagandiste

Offline mr_foggy

  • Posts: 670
  • EU (non-nordeuk covered)
Re: [IC] Dune65
« Reply #2 on: Thu, 11 July 2024, 06:02:02 »
bauer blockers gud

Offline DirtyGingy

  • Posts: 216
Re: [IC] Dune65
« Reply #3 on: Thu, 11 July 2024, 06:36:29 »
I have to say, I initially thought "oh hey, a rather plain 65”, but then the side profile pic came up and I have ti say, classy.

Offline Verri0129

  • Posts: 2
Re: [IC] Dune65
« Reply #4 on: Thu, 11 July 2024, 08:58:56 »
Actually 200 units were sold in the 1st round early bird GB in China. The WKL looks very cool!

Re: [IC] Dune65
« Reply #5 on: Thu, 11 July 2024, 09:28:19 »
That side profile goes hard

Sent from my Pixel 8 Pro using Tapatalk


Offline Neely_12

  • Posts: 361
  • Location: US
Re: [IC] Dune65
« Reply #6 on: Thu, 11 July 2024, 10:21:25 »
Board is clean, just wish there were some more unique colors. Glwic  :thumb:

Offline richardliu1124

  • Posts: 1
Re: [IC] Dune65
« Reply #7 on: Thu, 11 July 2024, 20:30:20 »
Sand Gold looks very elegant, I have already purchased it in group buy in China.


Offline Randomlosername

  • Posts: 62
  • Location: Fort Wayne, IN
  • Gacha Done Got Me
    • IG
Re: [IC] Dune65
« Reply #8 on: Fri, 12 July 2024, 12:45:04 »
This board seems so well designed! I absolutely love the Deep Sky, Midnight, and Emerald colors. The midpiece on the board is just perfect and that side profile is HOT. This is a must buy for me.

Offline xLeHoy

  • Posts: 74
  • weeb board enjoyer
Re: [IC] Dune65
« Reply #9 on: Fri, 12 July 2024, 15:48:13 »
Nice side profile for sure. Looking forward to seeing more!

GLWIC

Offline antsinyourpants

  • Posts: 33
  • Location: Hong Kong
Re: [IC] Dune65
« Reply #10 on: Fri, 12 July 2024, 21:48:58 »
Gorgeous! SA Ramses would pair perfectly with this.

Offline JonBon

  • Posts: 1
Re: [IC] Dune65
« Reply #11 on: Sat, 13 July 2024, 14:01:03 »
I love the attention to detail, especially the interior engraving!  I'll definitely be following this project.  GLWIC

Offline Kndra

  • Posts: 5
Re: [IC] Dune65
« Reply #12 on: Sun, 14 July 2024, 01:41:07 »
holy side profile

such a pretty keyboard
I have a distaste for the function row

Offline Zyrophr

  • Posts: 88
  • Location: Paris, France
  • https://zyrophr.com
    • zyrophr.com
Re: [IC] Dune65
« Reply #13 on: Sun, 28 July 2024, 11:12:55 »
bump because true wkl
French keyboard streamer

Offline BlivionIaG

  • Posts: 27
  • Location: France
Re: [IC] Dune65
« Reply #14 on: Sun, 28 July 2024, 11:16:17 »
Ohhh a wkl 65 that is pretty 👀.

Offline ThatGeologist25

  • Posts: 3
  • Location: Tamworth, NSW, Australia
Re: [IC] Dune65
« Reply #15 on: Tue, 13 August 2024, 09:03:11 »
This looks hella pretty. I almost expected just another plain 65% but damn that side profile goes hard the inside looks amazing. I just want to know when group buy outside China will occur.

Offline Randomlosername

  • Posts: 62
  • Location: Fort Wayne, IN
  • Gacha Done Got Me
    • IG
Re: [IC] Dune65
« Reply #16 on: Sun, 25 August 2024, 10:19:27 »
Bumping this bc I keep losing the thread and I have to search for when I wanna come stare at this pretty as mf board.

Offline Fwuzzy

  • Posts: 1
Re: [IC] Dune65
« Reply #17 on: Tue, 03 September 2024, 17:07:07 »
I need

Offline tuxkey

  • Posts: 91
  • Location: The Netherlands
Re: [IC] Dune65
« Reply #18 on: Mon, 09 September 2024, 11:12:22 »
Come on guys how about sum EU vendors.. i mean if Geon can give us EU vendors so can you.. There are enough good ones.. Keygem, DeltaKeys, Candykeys .. So no excuse i like the brass bottom and the fact that there is so much brass internal facing promises good internal sound.. And i have like 10 or more 65% boards but this could be my final 65% but not if i have to deal with customs crap.
Thinking about it ,...it's good that you don't have a EU vendor otherwise it would be extremely hard for me to resist.. As Desert theme and that 6.25 spacebar with 3 left 2 right 1.25 is my fav layout..  :cool:
But no EU vendor is a good excuse for me to skip
« Last Edit: Mon, 09 September 2024, 11:23:52 by tuxkey »

Offline fuster

  • Posts: 18
Re: [IC] Dune65
« Reply #19 on: Mon, 09 September 2024, 11:52:02 »
Gorgeous looking board, too bad it is a 65%

Offline kenny_25

  • Thread Starter
  • Posts: 9
Re: [IC] Dune65
« Reply #20 on: Thu, 12 September 2024, 10:46:13 »
I need

The GB has started, feel free to check it out!

Offline androo530

  • Posts: 2
  • Location: NA
Re: [IC] Dune65
« Reply #21 on: Sat, 14 September 2024, 20:41:59 »
is there a schedule or list of content creators reviewing the board? Lowkey waiting for someone to test out the half plate to see how it sounds before I pull the trigger

Offline ylothar

  • Posts: 199
  • Location: Italy
  • Yo Ho Ho!
    • KEEB.it
Re: [IC] Dune65
« Reply #22 on: Sun, 15 September 2024, 02:01:40 »
«How much wood could a woodchuck chuck if a woodchuck could chuck wood?»

Offline neeebskeeb

  • Posts: 2
Re: [IC] Dune65
« Reply #23 on: Sun, 15 September 2024, 15:00:38 »
@Kenny_65

Is Hotswap 7u Spacebar for the WK layout possible? Please please consider adding that option, I will love you forever! lol

P.S. Delete 6.25 spacebar if needed hehe  ;D

Offline androo530

  • Posts: 2
  • Location: NA
Re: [IC] Dune65
« Reply #24 on: Sun, 15 September 2024, 20:34:48 »

Thanks, I saw these videos. I don't think any reviewer has received or used the half plate yet. Hoping to get some half plate sound test at some point

Offline Randomlosername

  • Posts: 62
  • Location: Fort Wayne, IN
  • Gacha Done Got Me
    • IG
Re: [IC] Dune65
« Reply #25 on: Sun, 15 September 2024, 23:59:00 »

Thanks, I saw these videos. I don't think any reviewer has received or used the half plate yet. Hoping to get some half plate sound test at some point

Yeah I really wanna hear how a half plate sounds. Granted I already bought a board with both solder and hotswap pcb lol.

Offline kenny_25

  • Thread Starter
  • Posts: 9
Re: [IC] Dune65
« Reply #26 on: Fri, 20 September 2024, 02:20:44 »
09/20 Update:
Adding reference picture of minor changes to the case for the international units.
Adding pictures for Crimson and Rose colorway

Offline kenny_25

  • Thread Starter
  • Posts: 9
Re: [IC] Dune65
« Reply #27 on: Fri, 20 September 2024, 04:33:49 »
is there a schedule or list of content creators reviewing the board? Lowkey waiting for someone to test out the half plate to see how it sounds before I pull the trigger

Right now we have Alexotos and Mechmerlin finished their review.
While this below list of content creators are going to post before the gb ends
Dbokey
Markerchun
Bumblebee



Offline kenny_25

  • Thread Starter
  • Posts: 9
Re: [IC] Dune65
« Reply #28 on: Fri, 20 September 2024, 04:35:20 »
@Kenny_65

Is Hotswap 7u Spacebar for the WK layout possible? Please please consider adding that option, I will love you forever! lol

P.S. Delete 6.25 spacebar if needed hehe  ;D

Unfortuantely it won't be possible as its is already full to fill the bottom row with wk and wkl layout. It wont be possible to fit the 3rd. WK 7u only available on solder pcb

Offline kenny_25

  • Thread Starter
  • Posts: 9
Re: [IC] Dune65
« Reply #29 on: Fri, 20 September 2024, 04:46:20 »

Thanks, I saw these videos. I don't think any reviewer has received or used the half plate yet. Hoping to get some half plate sound test at some point

Yeah I really wanna hear how a half plate sounds. Granted I already bought a board with both solder and hotswap pcb lol.


is there a schedule or list of content creators reviewing the board? Lowkey waiting for someone to test out the half plate to see how it sounds before I pull the trigger


Thanks, I saw these videos. I don't think any reviewer has received or used the half plate yet. Hoping to get some half plate sound test at some point

Yeah I really wanna hear how a half plate sounds. Granted I already bought a board with both solder and hotswap pcb lol.



Thanks, I saw these videos. I don't think any reviewer has received or used the half plate yet. Hoping to get some half plate sound test at some point

We sent half plate to Dbokey, hoping he will build one with half plate

Offline kenny_25

  • Thread Starter
  • Posts: 9
Re: [IC] Dune65
« Reply #30 on: Wed, 25 September 2024, 05:21:11 »
Update on media list with link:
Alexotos:
MarkerChun:
Mechmerlin:
Dbokey: waiting
BumbbleBee: https://www.instagram.com/p/DAME_6NKElW/

Offline kenny_25

  • Thread Starter
  • Posts: 9
Re: [IC] Dune65(GB has started on vendors)
« Reply #31 on: Tue, 08 October 2024, 19:37:08 »
GB has started on vendors,GB 12 Sep, 2024 - 15 Oct, 2024

Hello everyone, I am Kenny from Grit.
Introducing Dune 65, a 65% keyboard kit with an elegant design and excellent typing experience.
Show Image

 

Exterior Design:
The inspiration for Dune 65 comes from the lines formed under the action of wind on sand dunes (see the image below: sourced from the internet, contact for removal if copyright infringement).
Our goal for the board design is to be aesthetically pleasing while maintaining simplicity.
Therefore, we have removed elements such as logos and text, starting from the most basic points, lines, and surfaces.
The interwoven lines on the back can represent either deserts stretching to the horizon or layers of sand dunes, allowing everyone to enrich its meaning through their imagination.
Show Image

 
Based on the initial design drawings, we adjusted the overall thickness, typing angle, and front height.
We also reconstructed the lines at the back, optimizing the overall visual effect.
While ensuring the appropriate bottom case thickness and enough bottom clearence, we minimized the front height and EKH (Edge Key Height) as much as possible.
The typing angle is set at 8° to achieve a more comfortable typing experience.
Prototype Pics:
Show Image

Show Image

Show Image

Show Image
   


Basic Information:
- Layout: 65%, 6.25U WK Layout/ 7U WKL Layout
- Typing angle: 8°
- Front Height: 16.5mm
- EKH: 21.59mm
 
Show Image

 
Show Image

Show Image


Supported Layout
Hotswap:
Show Image


Solder:
Show Image


Mounting Styles and Internals:
Show Image

Show Image

 
The dual mounting style design of the internal brings high playability to the keyboard.
We continue to use the dual mounting style on Dune 65 and have made further improvements.

For the Top mount, we adopted the Leaf Spring Top Mount and adjusted the arrangement of the lower edge plate springs to ensure a consistently excellent inner shell feel and a crisp and pleasing spacebar sound.
For the Gasket structure, to achieve a solid typing experience, we abandoned the leaf spring structure and adopted a silicone Gasket Mount.

In terms of PCB, it will be using a 1.6mm black core board without flex-cuts.
This internal design ensures a clean sound even without foam.

For the bottom case, we chose brass as the high-density material and kept as is.
We placed the small board and battery compartment inside the weight to make the bottom chamber flat and the bottom shell thickness uniform, resulting in a purer and more solid sound feedback.


Keyboard Information
Mounting Style: Leaf Spring Top Mount / Gasket Mount
PCB: 1.6mm black core
Firmware: QMK/VIA Supported Solder & Hotswap PCB
Plate: Aluminum, extra Alu Half Plate
Plate file will be public after GB ends

Top Case Material: 6063 Aluminum
Bottom Case Material: Brass
Weight Material: 6063 Aluminum
Top Case and Weight Surface Treatment: Anodization
Bottom Case Surface Treatment: Transparent E-Coat


Group Buy Colors (Prototype Pics):
- Moonlight (Silver)
Show Image

- Deep Sky (Gray)
Show Image
   
- Sand (Sand Gold)
Show Image

- Emerald (Green)
Show Image

- Midnight (Blue)
Show Image

- Crimson (Red)
Show Image

- Rose (Rose Gold)
Show Image


For more prototype Photos, feel free to check out the below album
Scene: https://imgur.com/a/wGji7Mm
Colors: https://imgur.com/a/Em3R4qE
New Album: https://imgur.com/a/changes-compared-8fMdkFC

Minor changes to the international units
Show Image

Show Image

Show Image


Vendor:
Geon Works
KBDFans
Keyspensory

Projected Price Point: $350 + Shipping

DC Invite Link: https://discord.gg/tpENfnabV9


Offline Isodorf

  • Posts: 1
Re: [IC] Dune65(GB has started on vendors)
« Reply #32 on: Sat, 12 October 2024, 19:19:27 »
will different plate materials ever be offered?