Author Topic: White Filco Majestouch TKL w/ blues (Read 2659 times)

Waterdr1nker · « **on:** Sun, 31 July 2011, 16:10:02 »

Let me know =)

RiGS · « **Reply #1 on:** Sun, 31 July 2011, 16:49:01 »

White Filco is not available with blue switches.

Waterdr1nker · « **Reply #2 on:** Sun, 31 July 2011, 17:15:26 »

Quote from: RiGS;390564

White Filco is not available with blue switches.

They may not be available anywhere, but they do exist.

Picture from this very forum:

prd · « **Reply #3 on:** Sun, 31 July 2011, 17:20:07 »

Hm, you can get one with browns and switch the innards for blues.

I think I proposed a similar solution to someone who wanted a Ninja with blues. When the day is over, truth is that it's just a case.

RiGS · « **Reply #4 on:** Sun, 31 July 2011, 17:20:31 »

These were a very limited special run with otaku keys.

Waterdr1nker · « **Reply #5 on:** Sun, 31 July 2011, 17:23:35 »

Quote from: prd;390585

Hm, you can get one with browns and switch the innards for blues.

I'm thinking about this, but I'm scared that I might **** something up. It's definitely something I'm willing to do if my desperation becomes too much to bear. D=

prd · « **Reply #6 on:** Sun, 31 July 2011, 17:27:11 »

I'm gonna strip a brand new Filco soon and will let you know if it blew in my face. Hope it doesn't.

Waterdr1nker · « **Reply #7 on:** Sun, 31 July 2011, 17:46:03 »

Is there a fairly recent guide for swapping plate mounted switches? The one in Ripster's sig is for pcb mounted switches and the plate mounted guide he posted is down.

RiGS · « **Reply #8 on:** Sun, 31 July 2011, 17:50:01 »

Yeah, it's called soldering 101.

keyboardlover · « **Reply #9 on:** Sun, 31 July 2011, 17:51:34 »

Quote from: RiGS;390609

Yeah, it's called soldering 101.

This is what we call "trolling 101".

RiGS · « **Reply #10 on:** Sun, 31 July 2011, 18:01:26 »

Hey, I'm serious.

Waterdr1nker · « **Reply #11 on:** Sun, 31 July 2011, 18:01:52 »

Lollol, thanks but I know soldering, bro.

noodles256 · « **Reply #12 on:** Sun, 31 July 2011, 18:51:20 »

obviously not

Waterdr1nker · « **Reply #13 on:** Sun, 31 July 2011, 19:25:15 »

Lollol, u knw me 2 well, bro.

IvanIvanovich · « **Reply #14 on:** Sun, 31 July 2011, 19:31:14 »

Swapping the entire insides into a different body would be trivial. It's just popping open the shells and moving one into the other. Use a flathead to pop off the top bezel, pull the rubber feet off the bottom to get at the screws that hold the pcb / plate assembly in place. Why would you need to solder anything?

noodles256 · « **Reply #15 on:** Sun, 31 July 2011, 19:35:53 »

Quote from: lysol;390662

Swapping the entire insides into a different body would be trivial. It's just popping open the shells and moving one into the other. Use a flathead to pop off the top bezel, pull the rubber feet off the bottom to get at the screws that hold the pcb / plate assembly in place. Why would you need to solder anything?

careful, OP knows a lot.

RiGS · « **Reply #16 on:** Sun, 31 July 2011, 19:40:50 »

The OP needs 2 Filcos for this mod.
It's cheaper to replace the switches.

hashbaz · « **Reply #17 on:** Mon, 01 August 2011, 02:37:05 »

FWIW qtan says that white Filcos with blues do exist, but he doesn't have any right now:

http://geekhack.org/showthread.php?20167-White-Majestouch-2-with-blue-switches

News:

Author Topic: White Filco Majestouch TKL w/ blues (Read 2659 times)