Author Topic: [SHIPPING] R3 Moogle Kits (Read 239348 times)

NorrisB · « **Reply #600 on:** Wed, 25 April 2012, 23:54:33 »

Thanks Hashbaz

hashbaz · « **Reply #601 on:** Thu, 26 April 2012, 00:07:45 »

Quote from: Zifle;582493

Paid, thanks for running this!

And, I fail to remember, did we fill out the address in the order form? I assume we did, since the invoice didn't mention it, but I better make sure :#

Yep, shipping address was part of the order form.

hashbaz · « **Reply #602 on:** Thu, 26 April 2012, 00:58:22 »

Deskthority invoices have been sent. If you ordered but didn't get an invoice, let me know!

gimpster · « **Reply #603 on:** Thu, 26 April 2012, 01:57:33 »

Quote from: hashbaz;582431

Dunno for sure, but I would expect them to. I think Rag mentioned that SP had adjusted their molds or something?

Yup, every single set of modifiers I've received from SP (quite a few, btw) have fit loosely on my Filcos. Honestly, I think it's the Costar stabilizers more than the keys themselves...I don't remember having this problem (at least not this bad) with my Leopold while I had it.

hashbaz · « **Reply #604 on:** Thu, 26 April 2012, 02:00:10 »

Stabilized SP keys fit nice and snug on my Leo. I think the looseness got worse with Rag's red set though. Some people were complaining about mount alignment problems too.

nntnam · « **Reply #605 on:** Thu, 26 April 2012, 04:23:20 »

Paid. Thanks you. :-)

montechristo66 · « **Reply #606 on:** Thu, 26 April 2012, 05:30:26 »

Payment sent. Thanx! :smile:

J-P · « **Reply #607 on:** Thu, 26 April 2012, 06:09:30 »

all paid up

looking forward to trying these babies out. - Thanks Hashbaz!

inlikeflynn · « **Reply #608 on:** Thu, 26 April 2012, 07:21:08 »

paid up as well! thank you hashbaz!!!

tbag · « **Reply #609 on:** Thu, 26 April 2012, 08:04:16 »

Paid. Thanks Hash.

boost · « **Reply #610 on:** Thu, 26 April 2012, 08:36:36 »

lightsout714 · « **Reply #611 on:** Thu, 26 April 2012, 09:09:29 »

Quote from: placebo guy;582430

Payment sent. Can't wait to get these on my Filco. :playball:

Anybody know if these big modifiers fit loosely like Ragnarock Group buy?

Had the same issue with some of the SP RGB keys. Actually ad the same issue with cherry's too but that may just be because they were old. Although they shouldn't get worn there unless they were switched often.

i3oilermaker · « **Reply #612 on:** Thu, 26 April 2012, 09:13:14 »

I had a SP backspace key that was loose and rattled. Several fixes described in here by ripster and clickclack: http://geekhack.org/showthread.php?28632-Tighten-fit-on-MX-caps

I used the scotch tape method and it works flawlessly.

jinhan108 · « **Reply #613 on:** Thu, 26 April 2012, 10:23:01 »

Payment sent!

agor · « **Reply #614 on:** Thu, 26 April 2012, 11:21:19 »

Paid. Would've sent as gift for your hard work, but there isn't such an option on German Paypal...

nntnam · « **Reply #615 on:** Thu, 26 April 2012, 12:16:20 »

Quote from: agor;582794

Paid. Would've sent as gift for your hard work, but there isn't such an option on German Paypal...

Me too? Don't understand why :-(

Glissant · « **Reply #616 on:** Thu, 26 April 2012, 12:43:30 »

You send it as "gift" by choosing "Other" and then paying for the fees. Or at least that's the only way I know of sending anything as "gift".

Ovoxo · « **Reply #617 on:** Thu, 26 April 2012, 12:53:46 »

payment sent!

hashbaz · « **Reply #618 on:** Thu, 26 April 2012, 12:53:55 »

No need to send as gift, guys. The paypal fees are baked into the prices.

Reptile · « **Reply #619 on:** Thu, 26 April 2012, 12:57:10 »

Baked

sent from my mobile

hashbaz · « **Reply #620 on:** Thu, 26 April 2012, 13:02:24 »

Enter prototype is done, guys. The key is en route to me now. Here's Melissa's picture:

Zehkul · « **Reply #621 on:** Thu, 26 April 2012, 13:13:25 »

Yay for Kerning.

shawn o · « **Reply #622 on:** Thu, 26 April 2012, 19:02:14 »

PAID!

omuerte · « **Reply #623 on:** Thu, 26 April 2012, 20:25:31 »

Payment sent~

modulor · « **Reply #624 on:** Thu, 26 April 2012, 20:37:08 »

Payment Sent! :whoo:

biochem · « **Reply #625 on:** Thu, 26 April 2012, 21:17:11 »

Quote from: hashbaz;582911

Enter prototype is done, guys.

The arrowhead on the prototype looks to be smaller than the one on Cherry double-shots. Is this how it was intended?

hashbaz · « **Reply #626 on:** Thu, 26 April 2012, 21:19:25 »

Quote from: biochem;583393

The arrowhead on the prototype looks to be smaller than the one on Cherry double-shots. Is this how it was intended?

Nope, it was intended to be as close as possible. It'll be clearer what's different and what's correctable when I have the key.

hashbaz · « **Reply #627 on:** Thu, 26 April 2012, 23:39:40 »

97/134 of you have paid already. Thanks guys!

RickyJ · « **Reply #628 on:** Fri, 27 April 2012, 00:04:12 »

Paid!

Taeyoung · « **Reply #629 on:** Fri, 27 April 2012, 02:38:13 »

Paid!

Hzza · « **Reply #630 on:** Fri, 27 April 2012, 03:04:34 »

Paid up, sorry for the delay.

dragonken · « **Reply #631 on:** Fri, 27 April 2012, 12:41:09 »

payment sent!

nntnam · « **Reply #632 on:** Fri, 27 April 2012, 12:51:47 »

[Off topic] I cannot run a GB so I won't make an interest check. But I want these WASD sets so much. hashbaz or somebody else please run a GB on this. I think I'm not the only one like these WASD sets. I know you can always find a DS WASD set out there, but in this kind of color, it's nearly hopeless.

[ Attachment Invalid Or Does Not Exist ] 49271[/ATTACH]

[ Attachment Invalid Or Does Not Exist ] 49272[/ATTACH]

[ Attachment Invalid Or Does Not Exist ] 49358[/ATTACH]

reaper · « **Reply #633 on:** Fri, 27 April 2012, 13:31:07 »

They look good! Oh and payment sent. Thanks hash! =P

lightsout714 · « **Reply #634 on:** Fri, 27 April 2012, 18:57:50 »

Red on white is sweet. Not sure why anyone likes the others. They clash with pretty much anything.

metafour · « **Reply #635 on:** Fri, 27 April 2012, 19:09:41 »

Quote from: lightsout714;584337

Red on white is sweet. Not sure why anyone likes the others. They clash with pretty much anything.

Actually the cyan with the non-centered legends doesn't clash too bad with white on black Cherry DS

rindorbrot · « **Reply #636 on:** Sat, 28 April 2012, 03:07:47 »

payment done

noGG · « **Reply #637 on:** Sat, 28 April 2012, 05:05:19 »

Payment sent. Sorry for the delay but, I'm a college student who still struggles with money management from time to time.

wilsongunawan · « **Reply #638 on:** Sat, 28 April 2012, 06:50:34 »

is it possible that i get a full set modifier for my poker now?

hashbaz · « **Reply #639 on:** Sat, 28 April 2012, 18:18:31 »

All but 18 have paid. Almost there!

thegunner100 · « **Reply #640 on:** Sat, 28 April 2012, 18:54:31 »

Quote from: hashbaz;585141

All but 18 have paid. Almost there!

:deadhorse:

sth · « **Reply #641 on:** Sat, 28 April 2012, 22:48:12 »

paidouken

cycloverid · « **Reply #642 on:** Sun, 29 April 2012, 03:24:27 »

Little late, but I paid :/

What cutter size did they use on that enter prototype again?

Denonic · « **Reply #643 on:** Sun, 29 April 2012, 21:46:20 »

paid =)

hashbaz · « **Reply #644 on:** Sun, 29 April 2012, 22:22:01 »

Quote from: cycloverid;585414

Little late, but I paid :/

What cutter size did they use on that enter prototype again?

0.015". Melissa said anything bigger than that was too big for the 'e'.

lowkey · « **Reply #645 on:** Sun, 29 April 2012, 22:35:37 »

What does "cutter size" refer to?

hashbaz · « **Reply #646 on:** Sun, 29 April 2012, 22:45:06 »

Quote from: lowkey;586047

What does "cutter size" refer to?

The width of the lines that make up the letters on the key. The "Enter" lines are 0.015" and the arrow is 0.018".

cycloverid · « **Reply #647 on:** Sun, 29 April 2012, 23:51:54 »

In order to get the arrow exactly right, you're going to have to treat the 'pointer' section as you would one of the windows-logo-panes. I don't see this working with our traditional single-line approach and get that fullness it has. Melissa just had me send her an outline of the windows logo shapes (not center lines), and they handled it from there. Let me know if what I just said makes no sense at all...

Unless it's just supposed to be 'good enough' - which is fine too I suppose.

It'll be good to finally see this elusive 0.018" cutter, assuming of course that it really is 0.018"!! :mad2:

hashbaz · « **Reply #648 on:** Mon, 30 April 2012, 00:04:09 »

Quote from: cycloverid;586080

In order to get the arrow exactly right, you're going to have to treat the 'pointer' section as you would one of the windows-logo-panes. I don't see this working with our traditional single-line approach and get that fullness it has. Melissa just had me send her an outline of the windows logo shapes (not center lines), and they handled it from there. Let me know if what I just said makes no sense at all...

Unless it's just supposed to be 'good enough' - which is fine too I suppose.

It'll be good to finally see this elusive 0.018" cutter, assuming of course that it really is 0.018"!! :mad2:

Yeah I'm following you I think. You're saying the pointer needs to be done as an outline instead of centerline like the letters. I'll ask if that's a possibility, last I heard is that using two cutters for a contiguous legended area was no longer doable (despite the fact that she did it for you for moogle2 :mad2:).

Hopefully the prototype will be in my mailbox tomorrow and I'll post some better pictures alongside Cherry keys.

hashbaz · « **Reply #649 on:** Mon, 30 April 2012, 15:43:12 »

The envelope with the prototype Enter key arrived today .... without the prototype.

The envelope shows signs of tampering, and there is a slit cut in the bottom of the plastic baggie inside. Pretty sure that spells shenanigans from a postal employee or something.

I've emailed Melissa about it, we'll see what she says.

News:

Author Topic: [SHIPPING] R3 Moogle Kits (Read 239348 times)