Author Topic: Price Check- What's it Worth? (Read 2242703 times)

JaccoW · « **Reply #8850 on:** Wed, 30 June 2021, 05:03:30 »

Price check for a couple of keycaps.

BroBot Ribbit brown camo
BroBot Reaper V2- N5 Nightstalker Armor Collectors Edition with the poster, t-shirt and original box. Perhaps even the sticker if I can find it
Ivan's PBT Black on Black dyesub

Xyrgh · « **Reply #8851 on:** Mon, 19 July 2021, 03:12:48 »

Looking for what this honeyb kit would be worth. Bought these years ago with the intention of putting them on a board but then lost interest. Kit complete unused, taken out for some photos.

HONEYB/TENKLESS/SPH Blue Grey
HONEYB/NUMPAD/SPH Grey Blue
HONEYB/SPACE625/BLUE

tankfulloffoxes · « **Reply #8852 on:** Sun, 01 August 2021, 23:18:00 »

It's been a while since I was part of this scene, and I'm needing to offload my stock due to some life changes. What are the going rates for the following keyboards these days?

GON acrylic tkl w/ lubed gateron whites and sprit 55g gold springs
Winkeyless.kr b.face hhkb layout (RGB underglow) w/ gateron blacks
minivan 40% in lightcycle colors ( no keycaps) w/ cherry mx blues.

thanks in advance.

ranker · « **Reply #8853 on:** Fri, 03 September 2021, 15:46:04 »

Any idea what the value on these are? New condition Topre Digilog cases for the Realforce 87U One silver and one black. I think I bought them from Originative in 2014

harukai · « **Reply #8854 on:** Sun, 05 September 2021, 05:50:29 »

Curious on prices for Duck keyboards: Octagon V3 and Orion V3

xeoomd · « **Reply #8855 on:** Sun, 05 September 2021, 12:07:51 »

Quote from: harukai on Sun, 05 September 2021, 05:50:29

Curious on prices for Duck keyboards: Octagon V3 and Orion V3

octagon v3: 500 - 550 flawless cond
orion v3: 700-750 flawless cond

animated · « **Reply #8856 on:** Thu, 16 September 2021, 12:01:29 »

Can I get a price check on an OG desko set with rgb mods? Curious if its worth less than the CRP desko set?

KinanThinks · « **Reply #8857 on:** Wed, 13 October 2021, 10:30:37 »

Hope I'm in the right place. Would like to know if my keyboard is worth anything all together - details below:

Royal Kludge RK G68
- Tecsee Carrot Switches (lubed 205g0)
- Kintetic Lab Whale keycaps
- stock stabs + clipped + holee + lubed 205g0 + dielectric grease
- Band-Aid mod
- case foam
- pcb foam

ranker · « **Reply #8858 on:** Sun, 24 October 2021, 20:08:48 »

Price check on my silver Lightsaver V1 new never assembled.
I purchased it from Sherryton's group buy in 2014.

What's this baby worth?

This is another members pic but mine looks identical

CMYK · « **Reply #8859 on:** Mon, 01 November 2021, 13:31:49 »

Could I have some help pricing a bunch of outdated keyboards?

Rama M65-A with Aluminum bottom
Kira 60 w/o PCB
KMAC numpad
Duck Blackbird with New PCB and Plate

LightningXI · « **Reply #8860 on:** Mon, 01 November 2021, 14:48:49 »

Quote from: ranker on Sun, 24 October 2021, 20:08:48

Price check on my silver Lightsaver V1 new never assembled.
I purchased it from Sherryton's group buy in 2014.

What's this baby worth?

Show Image

This is another members pic but mine looks identical

Lightsavers unfortunatley don't go for much beyond their cost so around $350-400 maximum.

Quote from: CMYK on Mon, 01 November 2021, 13:31:49

Could I have some help pricing a bunch of outdated keyboards?

Rama M65-A with Aluminum bottom
Kira 60 w/o PCB
KMAC numpad
Duck Blackbird with New PCB and Plate

M65-A: probably about $500-550
Kira60: $250-280
KMAC Numpad: $250
Duck Blackbird: $800 max

CMYK · « **Reply #8861 on:** Mon, 01 November 2021, 14:57:34 »

I appreciate it. Thank you!

LightningXI · « **Reply #8862 on:** Mon, 01 November 2021, 15:00:33 »

Quote from: CMYK on Mon, 01 November 2021, 14:57:34

I appreciate it. Thank you!

There is a good chance a lot of these boards are old enough (and there's always so many new keyboards coming out), that they might not see those values, so maybe consider proceeding with an OBO/or best offer tag and see where it goes. GL!

CMYK · « **Reply #8863 on:** Tue, 02 November 2021, 18:22:14 »

Looking for help pricing a few more things.

SA Penumbra keycaps (Originative version)
GMK Hydro with extra space bar kit, and novelties.

stidal · « **Reply #8864 on:** Fri, 05 November 2021, 06:33:58 »

price check on a noxary vulcan (non-pro)? been trying to find one, but have only seen one that was ever up for sale (went for 600 usd, mechmarket discord, january 2021). is it even feasible to get my hands on one?

maskey · « **Reply #8865 on:** Fri, 05 November 2021, 15:00:53 »

Price check on a Cherry MX Arctic Lycan bro cap. Has been in the bag since I got it. I have the Certificate of Authenticity card too.

dankthropod · « **Reply #8866 on:** Sat, 04 December 2021, 04:39:15 »

What's a KBD67 Lite v2 light blue with sushi epbt keycaps and gateron black inks worth? Fully lubed with durock v2 stabs

takeyourtime · « **Reply #8867 on:** Wed, 08 December 2021, 13:15:43 »

Hello, how much is a gmk mizu base set worth? It is not sealed but has never been used. Thanks!

PeKron · « **Reply #8868 on:** Mon, 27 December 2021, 12:14:00 »

Hey,

thanks for having me here!

I am from Germany and I work in IT.
Found this very weird keyboard in our tech dumpster at work, a few years back.
I kept it because it looked like a quality product from cherry and was just so quirky.
So I, with permission, I brought it home and used it for a few days. I forgot about it and today I stumbled over it again.
Did some research and it seems that this keyboard is quite rare and popular (at least among you guys).

The Keyboard says: G80-5000HAMDE / GDDG80-5000 and the Numpad says G80-5700HAADE

All works very well. Have a PS2/USB Adapter and it works perfectly. Even the Numpad works - no problem on my Linux Machine (did not test Windows - but should be no problem). Could need a thorough cleaning though.
Can you help me to price it right? Especially with the German Layout. Would it be wise to sell it as a set or should I separate the numblock?

Thank you so much for helping me.

TopreFan333 · « **Reply #8869 on:** Tue, 28 December 2021, 12:01:12 »

hi folks,

I've got a black HHKB Professional 2 which I've used a fair bit but has never been opened up or modded in any way.
It came with black-on-black keycaps which I never used, pulled off and replaced with the gray ones. How much do we think this is worth as a bundle?

- black HHKB Professional 2 -- good condition, works perfectly
- black-on-black HHKB keycaps -- unused, in box.

thanks!

HoffmanMyster · « **Reply #8870 on:** Thu, 06 January 2022, 13:03:07 »

Price check on stock Cherry MX Clears?

Edit: nvm, found it

csphilli · « **Reply #8871 on:** Mon, 10 January 2022, 07:36:33 »

Bitmap Studio Alpine65 kit

Fully assembled (keys and stabs lubed. Using brass backplate)
Color is Navy blue.
NO keycaps
switches: From ZealPC, Tealio V2 linear switches.
stabs: From ZealPC, Zeal transparent gold plated screw ins
kit includes spare PCB and FR4 backplate, and leftover switches

sndb · « **Reply #8872 on:** Fri, 21 January 2022, 01:40:49 »

So I'm about 2yrs late, but I'm somewhat obsessed with getting nice alu case for a Topre board, specifically an fc660 or a TKL, but I've never really cared for the lines of most Norbauer cases, with a the Norbatouch being an exception--it's hard to dislike a design that earnest and traditional. Also never really cared for the RF R1 forehead, so I'm down to the TX-66c until someone makes an R2 case.

What should I be offering for a TX-66c if I can find one being sold again? All I have ever seen being sold or traded are white TX-66c, were the black and grey units produced in lower numbers?

mcarni · « **Reply #8873 on:** Wed, 26 January 2022, 13:38:24 »

I was wondering how much this typewriter could be worth

thanks a lot

wLufty · « **Reply #8874 on:** Mon, 31 January 2022, 17:56:10 »

Quote from: mcarni on Wed, 26 January 2022, 13:38:24

I was wondering how much this typewriter could be worth

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

thanks a lot

Typewriters are worth whatever they are on ebay (or your local marketplace) unless it has an uncommon typeface (usually script, but there are more obscure ones like gothic, vogue, ect. Those run in the 300+ some being over 2k)

TheMastermind · « **Reply #8875 on:** Thu, 10 February 2022, 00:54:45 »

Looking at selling a Port colored Hotswap RAMA U80-A. No internal weight and practically unused.

LightningXI · « **Reply #8876 on:** Thu, 10 February 2022, 01:00:36 »

Quote from: TheMastermind on Thu, 10 February 2022, 00:54:45

Looking at selling a Port colored Hotswap RAMA U80-A. No internal weight and practically unused.

Took a quick look at r/mm and it looks like they aren't selling for more than $600 or so shipped. I'd list lower for a quick sale.

garfi3ld · « **Reply #8877 on:** Sat, 26 February 2022, 17:03:35 »

Price check on

-TKL set of Skull Squadron DSA

-Trouble Minds SA from the original run including the Joker Mods

-GID Apollo Kosmonavt with a crack in the stem (works fine but there is the crack)

dunglefinker · « **Reply #8878 on:** Sun, 27 February 2022, 02:58:08 »

Howdy, wondering what a lightly used GMK Metropolis Base with Signs is going for right now c:

ty have a nice day

crack20000 · « **Reply #8879 on:** Thu, 03 March 2022, 20:16:31 »

How much would an unused Keycult No 1/60 PCB be worth?

https://keycult.com/products/wt60-a-pcb-60

meawto · « **Reply #8880 on:** Sat, 19 March 2022, 01:20:25 »

Price Check for full nixie board 2022

Rit · « **Reply #8881 on:** Sat, 19 March 2022, 14:19:59 »

Just finished cleaning this one up. The missing key is being repaired at the moment.

Batmann · « **Reply #8882 on:** Mon, 28 March 2022, 16:03:26 »

Hi friends,
I have an LZ GH keyboard I am willing to sell but I am not sure how much to ask for. Can someone help?
here is a picture of it

sorry about the poor quality, dropbox is trolling me
I can probably get better pictures if needed

thanks!

Sygaldry · « **Reply #8883 on:** Tue, 05 April 2022, 09:23:35 »

Hi friends!

Lost interest in MKs after the GMK Hyperfuse fiasco and never got around to liquidating my remaining collection.

Would like to sell off everything now but not sure what the going price of everything is. Could I get some help valuing the stuff I have left?

Keyboards:
HHKB Pro 2 Type-S - stock and mint condition
CM Novatouch with crappy ABS keycaps

Artisans:
Clack Mint Gum Topre Skull
Clack Candy Corn Blank MX
Bro BroBot V2 and FN (Royal Blue?) Topre
Bro BroBot V2 and FN (Pink?) Topre

Other:
Hasu BT Controller for HHKB

Thanks!

jrivas0722 · « **Reply #8884 on:** Wed, 06 April 2022, 14:37:48 »

How much is the Future Space Deskmat is worth in good condition.
https://thekey.company/products/future-space-deskmat

Thanks!

tnquntumink · « **Reply #8885 on:** Fri, 15 April 2022, 03:04:08 »

HHKB Pro 2 with the following modifications: hasu bluetooth controller, deskeys pink domes, deskeys #3 silencing rings, lubed w/ krytox 205g0, deskeys landing pads, sorbothane foam inside, original black printed keycaps. Comes with USB mini cable.

TacticalCoder · « **Reply #8886 on:** Fri, 15 April 2022, 18:16:10 »

Need a very approximative price check on my HHKB Pro 2 / black with black "otaku" keys. I used it for a while but since then I switched to the HHKB Pro JP. It's stock, with it's box. Only "fancy" thing is it has a blue esc key.

robotox · « **Reply #8887 on:** Wed, 27 April 2022, 10:27:58 »

Hi. I have a Bro "Jolly Roger." It's green and purple and has the Bro authentication. Interestingly, the certificate of authenticity lists it as "G4329" but there's a typo because on back of t he cap it says "G4429." Also, it's from ~6 years ago.

Thank you for any help! And I'm not looking to sell the cap as much a s find out the value so I can trade it.

Backspace2 · « **Reply #8888 on:** Sun, 01 May 2022, 09:52:27 »

Price check on Black Bakenko 60? Pretty much new condition, just want to sell it. Maybe 20-ish bucks off retail cost?

Rezkian · « **Reply #8889 on:** Sat, 07 May 2022, 12:10:06 »

Current prices on Beamsprings 3726 or 3728 or 3729?

Rob27shred · « **Reply #8890 on:** Sat, 07 May 2022, 12:14:30 »

Quote from: Backspace2 on Sun, 01 May 2022, 09:52:27

Price check on Black Bakenko 60? Pretty much new condition, just want to sell it. Maybe 20-ish bucks off retail cost?

Sounds about right to me, or retail cost & you eat shipping to the buyer always seemed fair to me for new/like new condition stuff.

TomahawkLabs · « **Reply #8891 on:** Thu, 12 May 2022, 15:18:47 »

Anyone have the current value or recent sale of SA Camping? I am struggling to find anything as far as sold data goes. I have the full set, but don’t have the error Mata key.

whiteduck · « **Reply #8892 on:** Sun, 15 May 2022, 11:51:56 »

Looking for some thoughts on some brobots. Red V1 gamer set and red and blue v2s.
https://imgur.com/a/Sy6lnd4

Thanks,
-wd

Bar81 · « **Reply #8893 on:** Fri, 20 May 2022, 15:09:21 »

What's a clack julysicle MX worth these days? Thanks.

lolkey · « **Reply #8894 on:** Tue, 31 May 2022, 19:37:25 »

Hi guys, just wondering if anyone had an idea of the worth of a lightly used HHKB 25th Anniversary board? It's a branded version, US version.

Rit · « **Reply #8895 on:** Sun, 12 June 2022, 14:10:20 »

Found an old IBM Model F at a garage sale. Curious how much it should sell for. Checked Flea-bay, and I see $90 to $500. :S
Do I have the "BATTLESHIP" KEYBOARD version because of the black back?

inbound_ · « **Reply #8896 on:** Mon, 13 June 2022, 12:06:34 »

How much for a Sun 68 Keyboard - Aluminum Weight Milky White Gold with a POM plate add-on.

fohat.digs · « **Reply #8897 on:** Wed, 15 June 2022, 18:33:41 »

Quote from: Rit on Sun, 12 June 2022, 14:10:20

Found an old IBM Model F at a garage sale. Curious how much it should sell for. Checked Flea-bay, and I see $90 to $500. :S
Do I have the "BATTLESHIP" KEYBOARD version because of the black back?

The label says "Model F" and that is a desirable one. I thought that they usually sold for a minimum of $300 and if you saw one for $90 you should either buy it yourself or list it here in "Great Finds".

ComradeSniper · « **Reply #8898 on:** Fri, 24 June 2022, 14:19:53 »

What would an IBM 4704 107 plus an xwhatsit converter go for these days? The converter is not soldered in, btw.

Very old pic, but it's still in the same condition. I see that some sold earlier this year in the $2200-2400 price range. Is that still appropriate?

fohat.digs · « **Reply #8899 on:** Sun, 26 June 2022, 14:10:50 »

Quote from: ComradeSniper on Fri, 24 June 2022, 14:19:53

the $2200-2400 price range. Is that still appropriate?

I can't answer your question, but mine could go in the block at that kind of price point. And my xwhatsit is soldered in.

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Author Topic: Price Check- What's it Worth? (Read 2242703 times)