Author Topic: Post your rig  (Read 116646 times)

0 Members and 1 Guest are viewing this topic.

Offline linziyi

  • Posts: 386
  • The one with many questions
Re: Post your rig
« Reply #250 on: Tue, 13 August 2013, 13:33:22 »
Is it me or is the picture quite weird?
Ducky DK9008G2 Pro

"Much to learn you still have" --Yoda


Offline badcop

  • Posts: 482
  • Location: NJ
  • thorpe thocking master race
Re: Post your rig
« Reply #251 on: Tue, 03 September 2013, 08:16:04 »
i'll post a few of my past W/C rigs and my current one.

2007
More
My first adventure into watercooling back in 2007.  It was just starting to get mainstream but there weren't a whole lot of elegant solutions to mounting a radiator other than hanging it off the back.  I went a lian li v2000 ($300 case  :eek:) and decided to hack the top out for a 320 rad and one cpu block.  q6600 ran super hot so i wanted some head room.  wire management was a nightmare in the case but i didn't really care that much at the time.  Inverted ATX sucks imo but i made due.
Pictures
More





Specs from what i can remember
More
Q6600 Lapped 3.6 ghz
EVGA 680i mobo (AWFUL AWFUL BOARD)
EVGA GTX 8800
2x WD 150 gig raptors raid 0
Corsair Dominator 4gb 1066 mhz ?
Lian Li V2000 Case
Various WC components - i don't remember honestly

2008-2009
More

This build was supposed to be a budget second computer for the basement but it ended up being close to a $5000 dollar build at the time.  i went a little overboard for a WOW box lol.  I started with an Antec P280 case but i ended up getting rid of it for a CM HAF 932 for a little more room.  The haf was completely dissembled rivets and all to be painted.  I took my time with this build due to its complexity.  I tried my best with wire management but i just had too much **** in this case for it to be show quality.  by the end of the build i wanted function over form so...

Pictures
More

ready for paint


excuse the RD haha

shipped in from germany


Fesser 340 MM radiator for one of the loops.  This thing was such overkill it wasn't even funny...  It was a limited edition run that they had as an open box at microcenter.

340mm rad vs 320 rad LOL


not bad for my first sleeving attempt.


copper porn

EK pump heads

front painted with 2 bay res's


this as just about the only way i could mount this thing...

bleeding the air!



Specs:
More
Intel 920 i7 OC'd to 4.2ghz http://valid.canardpc.com/show_oc.php?id=732100
Asus P6T Deluxe V2
Corsair Dominator 8gig
2x PNY GTX 285
Corsair HX 1000 PSU
3x OCZ Agility 30 gig SSD in raid 0 - living dangerously  :cool:
CM Haf 932
Heatkiller CPU and GPU Blocks
Bitspower Fittings
Fesser Monsta 340 Rad
Danger Den? 320 rad
2x Lian D5 pumps with EK pump heads
2x bitspower bay res's

2013
More
I built this pretty cheaply.  A lot of open box stuff from Microcenter. :)  i didn't take a lot of pictures for this build because it wasn't really anything custom going on.  I didn't sleeve anything and it was an AIO W/C setup.  Just a final picture


SPECS:
Intel 3770k @ 4.7 ghz 1.3v
2x 8gb Corsair Dominator 1800 mhz
2x Nvidia branded 660 Ti 1200/6000
Samsung 840 SSD 256gb
WD 1TB Black
Corsair AX860 PSU
Corsair 650 D Case
Corsair H100i CPU Cooler

The sandy/ivy bridge cpus are so STUPIDLY easy to overclock.  its like 3 settings in the bios and i had a stable system in like an hour haha.  I big change from the old FSB days.  getting a decent stable overclock always took me like 8 hours to get it perfect.
« Last Edit: Tue, 03 September 2013, 08:35:27 by badcop »
| MX Green Poker | HHKB Pro 2 White | HHKB Pro 2 Black | MX White Goldtouch TK Pad | Modded MX Red kul ES-87
| COMING SOON™ | MX Red GH60 | Ergo Clear GH60 |

Offline badcop

  • Posts: 482
  • Location: NJ
  • thorpe thocking master race
Re: Post your rig
« Reply #252 on: Tue, 03 September 2013, 08:36:34 »
i5 4670K@4,3GHz
Corsair H100i
Asus Gene 6 Z87
2x4GB Corsair Dominator Platinum 2133Mhz
Asus Directcu2 770GTX
Asus Phoebus
Corsair Ax760i
Samsung 840Pro 256Gb

Show Image

Show Image


mad clean  :thumb:
| MX Green Poker | HHKB Pro 2 White | HHKB Pro 2 Black | MX White Goldtouch TK Pad | Modded MX Red kul ES-87
| COMING SOON™ | MX Red GH60 | Ergo Clear GH60 |

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: Post your rig
« Reply #253 on: Tue, 03 September 2013, 08:49:35 »
i'll post a few of my past W/C rigs and my current one.

Great looking rigs!
getting tired of custom WC are you?

I hate the constant maintenance and the greed to keep upgrading
Quote
Women always figure out the truth. Always. - Han Solo

Offline badcop

  • Posts: 482
  • Location: NJ
  • thorpe thocking master race
Re: Post your rig
« Reply #254 on: Tue, 03 September 2013, 08:58:35 »
i'll post a few of my past W/C rigs and my current one.

Great looking rigs!
getting tired of custom WC are you?

I hate the constant maintenance and the greed to keep upgrading

yeah exactly.  i don't have the time i used to.  I would drain, clean and re bleed the lines at least once a year.  i may go back to a custom WC setup eventually but i will never do a dual loop ever again.  They are a huge pain in the ass.

my H100i is holding up quite well.  3770k is running at 4.7 ghz and under full load it doesnt go past 75 degrees.

EDIT:
Jokrick - i didn't even see your setup up there.  that thing is clean as hell too.  i have to try a white case one of these days.  they look so nice.
« Last Edit: Tue, 03 September 2013, 09:00:07 by badcop »
| MX Green Poker | HHKB Pro 2 White | HHKB Pro 2 Black | MX White Goldtouch TK Pad | Modded MX Red kul ES-87
| COMING SOON™ | MX Red GH60 | Ergo Clear GH60 |

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: Post your rig
« Reply #255 on: Tue, 03 September 2013, 13:24:50 »
I did this last winter after saving up nearly two thousand dollars (had to get the monitor and my first mechanical keyboard!)  This is the build log:
http://imgur.com/a/P8fvy

And some more ****ty pictures:
http://imgur.com/a/Epga1

She's still kickin' to this day.  Have her here in my dorm!

Offline SeriouSSpotS

  • Posts: 460
  • Location: South Wales - UK
  • 60% is love, 60% is life
Re: Post your rig
« Reply #256 on: Tue, 03 September 2013, 13:26:49 »
I did this last winter after saving up nearly two thousand dollars (had to get the monitor and my first mechanical keyboard!)  This is the build log:
http://imgur.com/a/P8fvy

And some more ****ty pictures:
http://imgur.com/a/Epga1

She's still kickin' to this day.  Have her here in my dorm!

Awesome looking rig
QFR - MX black   |   Poker X - Panda Clears   |   Poker 2 - MX blue

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Posts: 1303
  • Location: US: Virginia
Re: Post your rig
« Reply #257 on: Tue, 03 September 2013, 13:26:58 »
That CPU cooler!  Holy crap!   :eek:

I did this last winter after saving up nearly two thousand dollars (had to get the monitor and my first mechanical keyboard!)  This is the build log:
http://imgur.com/a/P8fvy

And some more ****ty pictures:
http://imgur.com/a/Epga1

She's still kickin' to this day.  Have her here in my dorm!

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: Post your rig
« Reply #258 on: Tue, 03 September 2013, 13:28:20 »
That CPU cooler!  Holy crap!   :eek:

I did this last winter after saving up nearly two thousand dollars (had to get the monitor and my first mechanical keyboard!)  This is the build log:
http://imgur.com/a/P8fvy

And some more ****ty pictures:
http://imgur.com/a/Epga1

She's still kickin' to this day.  Have her here in my dorm!
Yeah I had to reseat because I put way too much thermal paste on there the first time haha.

Offline oscillik

  • Posts: 410
  • Location: England
    • music podcasts
Re: Post your rig
« Reply #259 on: Tue, 03 September 2013, 14:11:30 »
(posting here since this is the long standing thread)

sorry for bad picture (can't get the whole case in shot properly)



Corsair Obsidian 900D
H110 all in one cooler (push/pull config)
Intel Core i7-3970x
Corsair Dominator GT 32GB RAM
Corsair Neutron GTX 240MB SSD
various hard disks of different sizes
EVGA GTX Titan
all fans are Noctua 140mm, except those on the back of the drive cages which are 120mm Noctuas

I do plan on putting a proper watercooling loop in here, but I found this site so....yeah....
HHKB Pro 2 55g with PBT Spacebar Realforce 23UB CODE Keyboard MX Clear

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: Post your rig
« Reply #260 on: Tue, 03 September 2013, 20:02:58 »
i'll post a few of my past W/C rigs and my current one.

Great looking rigs!
getting tired of custom WC are you?

I hate the constant maintenance and the greed to keep upgrading

yeah exactly.  i don't have the time i used to.  I would drain, clean and re bleed the lines at least once a year.  i may go back to a custom WC setup eventually but i will never do a dual loop ever again.  They are a huge pain in the ass.

my H100i is holding up quite well.  3770k is running at 4.7 ghz and under full load it doesnt go past 75 degrees.

EDIT:
Jokrick - i didn't even see your setup up there.  that thing is clean as hell too.  i have to try a white case one of these days.  they look so nice.
I still want a custom loop though
but not so extreme, maybe just cooling a cpu and a single card with 360+240 rad in a mid tower case
man Im in love with sm8-x caselabs
Quote
Women always figure out the truth. Always. - Han Solo

Offline domoaligato

  • * Exquisite Elder
  • Posts: 1662
  • Location: USA
  • All your base are belong to us!
    • All your base are belong to us!
Re: Post your rig
« Reply #261 on: Tue, 03 September 2013, 23:34:56 »
I still want a custom loop though
but not so extreme, maybe just cooling a cpu and a single card with 360+240 rad in a mid tower case
man Im in love with sm8-x caselabs

that is overkill for a cpu and one gpu.
I have a 2x gtx580's on one 360 and a 2600k on a 240
cpu = loop 1 and gpu's = loop 2


here is a pic

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: Post your rig
« Reply #262 on: Wed, 04 September 2013, 00:59:02 »
I still want a custom loop though
but not so extreme, maybe just cooling a cpu and a single card with 360+240 rad in a mid tower case
man Im in love with sm8-x caselabs

that is overkill for a cpu and one gpu.
I have a 2x gtx580's on one 360 and a 2600k on a 240
cpu = loop 1 and gpu's = loop 2


here is a pic
Show Image

I dont understand the word overkill :p

currently running 360+480+240 for SLI 670, mosfet and a 4.8ghz 3770k

dual loop in a mid tower case is amazing, its really hard to work with
well cone
Quote
Women always figure out the truth. Always. - Han Solo

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1876
  • Location: Arkansas
  • Say WHAAT...
Re: Post your rig
« Reply #263 on: Wed, 04 September 2013, 01:42:16 »
I'm still working on it...

4770K 4.6g at 1.28 on a Corsair H80
Z87 Sabertooth
Vengeance Pro 16gb 2133
Sli 780 SuperClocked ACX
AX1200i
Caselabs M8
Alphacool UT60 360mm x2
EK nickel/plexi CPU and GPUs (waiting for the second one now...)

Waiting on the last few things (should be here tomorrow) and then it's building time!!!
Gonna do acrylic tubing too!
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline oscillik

  • Posts: 410
  • Location: England
    • music podcasts
Re: Post your rig
« Reply #264 on: Wed, 04 September 2013, 04:21:12 »
I'm still working on it...
Show Image

4770K 4.6g at 1.28 on a Corsair H80
Z87 Sabertooth
Vengeance Pro 16gb 2133
Sli 780 SuperClocked ACX
AX1200i
Caselabs M8
Alphacool UT60 360mm x2
EK nickel/plexi CPU and GPUs (waiting for the second one now...)

Waiting on the last few things (should be here tomorrow) and then it's building time!!!
Gonna do acrylic tubing too!

I've never seen a Sabretooth board actually filled with components.

Gotta say, it looks DAMN good
HHKB Pro 2 55g with PBT Spacebar Realforce 23UB CODE Keyboard MX Clear

Offline Gunni

  • Posts: 110
  • Location: Australia
Re: Post your rig
« Reply #265 on: Wed, 04 September 2013, 05:17:44 »
I'll post some pictures soon, the specs are as follows:

Intel i5 3570K, 8GB G.Skill RAM, GTX 650 Ti OC, SanDisk Extreme 120GB SSD, 1TB Seagate HDD, Gigabyte GA-Z77X-D3H, Corsair GS600 PSU, Thermaltake Starcraft Case, Razer DeathAdder 2013 Mouse.

My current keyboard is a Microsoft Wireless 800, I'm getting a mechanical one soon...most likely a CM QuickFire Rapid!
CM Storm Quickfire TK w/ Browns HHKB Pro 2

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1876
  • Location: Arkansas
  • Say WHAAT...
Re: Post your rig
« Reply #266 on: Wed, 04 September 2013, 05:17:54 »
I'm still working on it...
Show Image

4770K 4.6g at 1.28 on a Corsair H80
Z87 Sabertooth
Vengeance Pro 16gb 2133
Sli 780 SuperClocked ACX
AX1200i
Caselabs M8
Alphacool UT60 360mm x2
EK nickel/plexi CPU and GPUs (waiting for the second one now...)

Waiting on the last few things (should be here tomorrow) and then it's building time!!!
Gonna do acrylic tubing too!

I've never seen a Sabretooth board actually filled with components.

Gotta say, it looks DAMN good
Thanks Oscillik! I'm gonna put a Asus Xonar STX in there somewhere too!  :p

P.S. Gunni, your setup sounds good! I've never seen the SC case...
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline Gunni

  • Posts: 110
  • Location: Australia
Re: Post your rig
« Reply #267 on: Wed, 04 September 2013, 05:21:46 »
Quote
P.S. Gunni, your setup sounds good! I've never seen the SC case...

Yeah it's a very nice case, I love it  ;D
CM Storm Quickfire TK w/ Browns HHKB Pro 2

Offline Winther

  • Posts: 58
  • Location: Danmark
Re: Post your rig
« Reply #268 on: Wed, 04 September 2013, 06:00:32 »
Right now my rig really doesnt look like anything special, not complaining about the hardware though.. :P

Here it is as it looks right now:



I'm planing on modding it and doing a full watercooling loop with chromes copper pipes.. :)

Offline badcop

  • Posts: 482
  • Location: NJ
  • thorpe thocking master race
Re: Post your rig
« Reply #269 on: Wed, 04 September 2013, 10:05:57 »
i'll post a few of my past W/C rigs and my current one.

Great looking rigs!
getting tired of custom WC are you?

I hate the constant maintenance and the greed to keep upgrading

yeah exactly.  i don't have the time i used to.  I would drain, clean and re bleed the lines at least once a year.  i may go back to a custom WC setup eventually but i will never do a dual loop ever again.  They are a huge pain in the ass.

my H100i is holding up quite well.  3770k is running at 4.7 ghz and under full load it doesnt go past 75 degrees.

EDIT:
Jokrick - i didn't even see your setup up there.  that thing is clean as hell too.  i have to try a white case one of these days.  they look so nice.
I still want a custom loop though
but not so extreme, maybe just cooling a cpu and a single card with 360+240 rad in a mid tower case
man Im in love with sm8-x caselabs

the sm8's are pretty cool.  I'm really glad manufacturers are starting to accommodate custom loops.  I remember back in the day, i would do just about anything for a mountain mods asscention case.

| MX Green Poker | HHKB Pro 2 White | HHKB Pro 2 Black | MX White Goldtouch TK Pad | Modded MX Red kul ES-87
| COMING SOON™ | MX Red GH60 | Ergo Clear GH60 |

Offline Kagusaki Wolf

  • Posts: 72
  • Location: San Diego
Re: Post your rig
« Reply #270 on: Wed, 04 September 2013, 10:09:28 »
Here's my big sexy beast.  He's an Inwin Q500N made in the late 90s/early 00s.  Been cut 120mm fan holes on the rear top and front bottom of the tower but man it's a pain in the rear to cut through the steel -_-

Motherboard: Gigabyte 890GPA-UD3H
CPU: Phenom II X6 1100T Black Edition
Ram: Corsair XMS 4GB X2
Graphics Card: MSI R6870 Twin Frozr II
HDD: Seagate Barracuda 1TB
PSU: Antec EarthWatts 750 Watt Power Supply
Keyboard: NMB Right Touch
OS: Windows XP/Ubuntu
SIIG Suntouch K101 | Northgate Omnikey Ultra T | NMB RT8255C+ | Cherry G84-4100 | Cherry G84-4420 X2 | IBM Model M | Laser Brand Keyboard | Monterey K 108 X2 |

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4615
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Post your rig
« Reply #271 on: Wed, 04 September 2013, 23:47:21 »
Here is my Fractal R4. Still with protective film on the side window.















« Last Edit: Thu, 05 September 2013, 17:17:29 by CommonCurt »
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1876
  • Location: Arkansas
  • Say WHAAT...
Re: Post your rig
« Reply #272 on: Thu, 05 September 2013, 00:11:13 »
Here is my Fractal R4. Still with protective film on the side window.

Show Image


Show Image


Show Image


Show Image


Show Image

Nice 760! Those things are pretty BA for the money. What are your monitors?
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4615
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Post your rig
« Reply #273 on: Thu, 05 September 2013, 00:23:01 »
Here is my Fractal R4. Still with protective film on the side window.

Show Image


Show Image


Show Image


Show Image


Show Image

Nice 760! Those things are pretty BA for the money. What are your monitors?

They are two Asus VE258Q 25-Inch. Some people were saying that they got theirs with dead pixels, but both of mine are fine. I really like them. Just kinda wish I would have gotten IPS.
The GTX 760 has been amazing for my needs.
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Badwrench

  • * Destiny Supporter
  • Posts: 1986
  • Location: So. Cal.
  • ummmm.....I forgot
Re: Post your rig
« Reply #274 on: Thu, 05 September 2013, 00:27:28 »
Some great looking rigs in here.  Figured I should add mine

PhenomII - 960T 3.0ghz (running as a quad at 4.073ghz)
CM Hyper 212evo push/pull (was running the H60 shown in the pic)
Asus M4A89GTD-pro usb3
8gb Samsung wonder ram
240 GB Samsung 840 ssd
1tb Samsung HDD
PNY 660Ti @ 965 core / 1602 memory
CM Silent Pro 700w
Inverted Lian-Li A05FNB
Asus Xonar DS
Scythe fan controller
Win7-64

34151-0
wut. i'd buy a ****ty IBM board for that green V2

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4615
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Post your rig
« Reply #275 on: Thu, 05 September 2013, 01:10:58 »
Some great looking rigs in here.  Figured I should add mine

PhenomII - 960T 3.0ghz (running as a quad at 4.073ghz)
CM Hyper 212evo push/pull (was running the H60 shown in the pic)
Asus M4A89GTD-pro usb3
8gb Samsung wonder ram
240 GB Samsung 840 ssd
1tb Samsung HDD
PNY 660Ti @ 965 core / 1602 memory
CM Silent Pro 700w
Inverted Lian-Li A05FNB
Asus Xonar DS
Scythe fan controller
Win7-64

(Attachment Link)

Very clean. Nice
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Posts: 1303
  • Location: US: Virginia
Re: Post your rig
« Reply #276 on: Thu, 05 September 2013, 08:40:08 »
That's a clean-looking case!  I could never get my Lian-Li's cables quite so organized (too many hard drives...), ended up moving to a larger model.

Some great looking rigs in here.  Figured I should add mine

PhenomII - 960T 3.0ghz (running as a quad at 4.073ghz)
CM Hyper 212evo push/pull (was running the H60 shown in the pic)
Asus M4A89GTD-pro usb3
8gb Samsung wonder ram
240 GB Samsung 840 ssd
1tb Samsung HDD
PNY 660Ti @ 965 core / 1602 memory
CM Silent Pro 700w
Inverted Lian-Li A05FNB
Asus Xonar DS
Scythe fan controller
Win7-64

(Attachment Link)

Offline microsoft windows

  • Blue Troll of Death
  • * Exalted Elder
  • Posts: 3621
  • President of geekhack.org
    • Get Internet Explorer 6
Re: Post your rig
« Reply #277 on: Thu, 05 September 2013, 09:38:49 »
THIS WEEKEND I'LL HAVE TO POST UP A COUPLE PANORAMAS OF MY COMPUTING SETUP.
CLICK HERE!     OFFICIAL PRESIDENT OF GEEKHACK.ORG    MAKE AMERICA GREAT AGAIN MERRY CHRISTMAS

Offline vasouv

  • Posts: 88
  • Location: Greece
Re: Post your rig
« Reply #278 on: Thu, 05 September 2013, 11:17:54 »
THIS WEEKEND I'LL HAVE TO POST UP A COUPLE PANORAMAS OF MY COMPUTING SETUP.
Dude, if you post any pictures of an ENIAC-like computer of yours, I'll come over there and kick your a*s! :P

Offline BliTzKiN

  • Posts: 142
  • Location: Singapore
Re: Post your rig
« Reply #279 on: Thu, 05 September 2013, 11:24:22 »
Some great looking rigs in here.  Figured I should add mine

PhenomII - 960T 3.0ghz (running as a quad at 4.073ghz)
CM Hyper 212evo push/pull (was running the H60 shown in the pic)
Asus M4A89GTD-pro usb3
8gb Samsung wonder ram
240 GB Samsung 840 ssd
1tb Samsung HDD
PNY 660Ti @ 965 core / 1602 memory
CM Silent Pro 700w
Inverted Lian-Li A05FNB
Asus Xonar DS
Scythe fan controller
Win7-64

(Attachment Link)

Wow! I'm really digging the looks of those cables. Really neat rig!

Offline SeriouSSpotS

  • Posts: 460
  • Location: South Wales - UK
  • 60% is love, 60% is life
Re: Post your rig
« Reply #280 on: Thu, 05 September 2013, 13:43:08 »
Some great looking rigs in here.  Figured I should add mine

PhenomII - 960T 3.0ghz (running as a quad at 4.073ghz)
CM Hyper 212evo push/pull (was running the H60 shown in the pic)
Asus M4A89GTD-pro usb3
8gb Samsung wonder ram
240 GB Samsung 840 ssd
1tb Samsung HDD
PNY 660Ti @ 965 core / 1602 memory
CM Silent Pro 700w
Inverted Lian-Li A05FNB
Asus Xonar DS
Scythe fan controller
Win7-64

(Attachment Link)

Nice looking rig
QFR - MX black   |   Poker X - Panda Clears   |   Poker 2 - MX blue

Offline Badwrench

  • * Destiny Supporter
  • Posts: 1986
  • Location: So. Cal.
  • ummmm.....I forgot
Re: Post your rig
« Reply #281 on: Thu, 05 September 2013, 16:51:41 »

Very clean. Nice

Thanks.



Wow! I'm really digging the looks of those cables. Really neat rig!

Thanks.  I have changed it several times, and decided I wanted something that I had not seen done before (and it matched my mobo).

That's a clean-looking case!  I could never get my Lian-Li's cables quite so organized (too many hard drives...), ended up moving to a larger model.

I have done the large case thing, and wanted to try to get a nice clean smaller rig but still be able to use my full ATX mobo.  The key to the minimal cabling was the modular psu and making my own cables. 

Here is my old setup:  Corsair 600T LE with the same basic hardware except 6870 gpu and full loop for cpu (240 rad, pump/res combo).  I was able to get over 4.2 ghz on this setup daily use, but just didn't like all the noise and how huge it was. 
34246-0



Nice looking rig

Thanks
wut. i'd buy a ****ty IBM board for that green V2

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1876
  • Location: Arkansas
  • Say WHAAT...
Re: Post your rig
« Reply #282 on: Tue, 10 September 2013, 04:27:27 »
Getting closer... Still waiting on MDPC from Germany!!!



{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3031
  • Location: Death Star
Re: Post your rig
« Reply #283 on: Tue, 10 September 2013, 08:28:30 »
Getting closer... Still waiting on MDPC from Germany!!!


Guessing you will be using 4x120 rad at the top to cool all those blocks?
very clean acrylic bend btw!
Quote
Women always figure out the truth. Always. - Han Solo

Offline SeriouSSpotS

  • Posts: 460
  • Location: South Wales - UK
  • 60% is love, 60% is life
Re: Post your rig
« Reply #284 on: Tue, 10 September 2013, 09:07:52 »
Getting closer... Still waiting on MDPC from Germany!!!

Show Image

Show Image

Show Image


That looks amazing
QFR - MX black   |   Poker X - Panda Clears   |   Poker 2 - MX blue

Offline Badwrench

  • * Destiny Supporter
  • Posts: 1986
  • Location: So. Cal.
  • ummmm.....I forgot
Re: Post your rig
« Reply #285 on: Tue, 10 September 2013, 10:54:40 »
wut. i'd buy a ****ty IBM board for that green V2

Offline domoaligato

  • * Exquisite Elder
  • Posts: 1662
  • Location: USA
  • All your base are belong to us!
    • All your base are belong to us!
Re: Post your rig
« Reply #286 on: Tue, 10 September 2013, 11:45:46 »
his motherboard comes with one. he just hasn't put it on yet.

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1876
  • Location: Arkansas
  • Say WHAAT...
Re: Post your rig
« Reply #287 on: Tue, 10 September 2013, 22:41:39 »
Looks great ApocalypseMaow, you actually made that case labs looks the correct size (instead of grossly oversized).  Now you just need one of these: 
Nah. I like the goldish/brown one that's on there.   :p



That looks amazing
Thanks Spots!

Guessing you will be using 4x120 rad at the top to cool all those blocks?
very clean acrylic bend btw!
Alphacool UT60s 3x120. I'll have two in the back half... Hope to get them standing upright, but might have to put one up top and the other in the middle... Working that all out now!  ;D

{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline RapidCancel

  • Posts: 35
Re: Post your rig
« Reply #288 on: Wed, 11 September 2013, 20:04:41 »
Here's mine, built it earlier this year.  Mainly wanted it to be portable for when moving between my gf's place and mine and to do some light gaming.

CPU: Intel Core i3-3220 3.3GHz
Heatsink: Noctua NH-L9I CPU Cooler
Mobo: Asus P8H77-I Mini ITX LGA1155
PSU: Antec 450W ATX12V
GPU: MSI Radeon HD 7850 2GB
Memory: Samsung 8GB (2 x 4GB)
Storage: Samsung 840 Series 120GB 2.5" SSD, Seagate 2TB 3.5"
Extra Fan: Scythe Gentle Typhoon
Case: Cooler Master Elite 120


Before the 7850 was installed

Offline CommonCurt

  • One of the cool kids
  • * Esteemed Elder
  • Posts: 4615
  • Location: WPB, FL
  • 🍒 Beige or Bust
    • My Flickr Page
Re: Post your rig
« Reply #289 on: Wed, 11 September 2013, 22:24:52 »
Getting closer... Still waiting on MDPC from Germany!!!

Show Image

Show Image

Show Image


That res is huge.  Nice
Some of my Keyboards -->
More
OTD Koala:  lubed 62g Old MX-Blacks   |   LZ-GH V2   |   KMAC2:  lubed 62g Tactile MX-Greys   |   LZ CLS s   |   X60:  lubed 62g Vintage MX-Blacks   |   GON NerD 60:  lubed 62g Old MX-Clears   |   Filco MJ2 (Beige) TKL's:  lubed 62g MX-Clears  &  lubed  62g Vintage MX-Blacks   |   IBM '91 SSK
                                
       
WTB/WTS/WTT ---->
More

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Posts: 1303
  • Location: US: Virginia
Re: Post your rig
« Reply #290 on: Thu, 12 September 2013, 07:35:59 »
Here's mine, built it earlier this year.  Mainly wanted it to be portable for when moving between my gf's place and mine and to do some light gaming.

CPU: Intel Core i3-3220 3.3GHz
Heatsink: Noctua NH-L9I CPU Cooler
Mobo: Asus P8H77-I Mini ITX LGA1155
PSU: Antec 450W ATX12V
GPU: MSI Radeon HD 7850 2GB
Memory: Samsung 8GB (2 x 4GB)
Storage: Samsung 840 Series 120GB 2.5" SSD, Seagate 2TB 3.5"
Extra Fan: Scythe Gentle Typhoon
Case: Cooler Master Elite 120

Show Image

Before the 7850 was installed
Show Image


That's a nice clean build!  Is that opening above the CPU fan a slot for an optical drive?  Couldn't tell from the front of the case if the upper section is a door for a DVD drive.

Offline SeriouSSpotS

  • Posts: 460
  • Location: South Wales - UK
  • 60% is love, 60% is life
Re: Post your rig
« Reply #291 on: Thu, 12 September 2013, 08:02:13 »
Here's mine, built it earlier this year.  Mainly wanted it to be portable for when moving between my gf's place and mine and to do some light gaming.

CPU: Intel Core i3-3220 3.3GHz
Heatsink: Noctua NH-L9I CPU Cooler
Mobo: Asus P8H77-I Mini ITX LGA1155
PSU: Antec 450W ATX12V
GPU: MSI Radeon HD 7850 2GB
Memory: Samsung 8GB (2 x 4GB)
Storage: Samsung 840 Series 120GB 2.5" SSD, Seagate 2TB 3.5"
Extra Fan: Scythe Gentle Typhoon
Case: Cooler Master Elite 120

Show Image

Before the 7850 was installed
Show Image


That is a nice little builds
QFR - MX black   |   Poker X - Panda Clears   |   Poker 2 - MX blue

Offline RapidCancel

  • Posts: 35
Re: Post your rig
« Reply #292 on: Thu, 26 September 2013, 09:21:48 »
That's a nice clean build!  Is that opening above the CPU fan a slot for an optical drive?  Couldn't tell from the front of the case if the upper section is a door for a DVD drive.

Thanks!  Are you talking about to the left of the fan?  If so, that's actually for the power supply.  From the front of the case, that's the slot for a DVD drive, but you have to remove the panel in order to install it.  I have a external usb one that I've been using so I figure I didn't need to buy an internal one.

That is a nice little builds

Thanks!  I think I like the small form factor so much that all my builds from now on will probably be the same.  I was able to fit the cpu and all the cables along with my mouse and keyboard into a duffle bag to transport, very convenient!

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21065
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Post your rig
« Reply #293 on: Thu, 26 September 2013, 18:29:21 »
Thanks!  I think I like the small form factor so much that all my builds from now on will probably be the same.  I was able to fit the cpu and all the cables along with my mouse and keyboard into a duffle bag to transport, very convenient!

Provided you can keep the rig cool, I like the smaller cases too.  Both of my last two purchases have been smaller cases.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline RapidCancel

  • Posts: 35
Re: Post your rig
« Reply #294 on: Thu, 26 September 2013, 19:08:43 »
Provided you can keep the rig cool, I like the smaller cases too.  Both of my last two purchases have been smaller cases.

I was worried about that too so I replaced the stock front fan that it came with and added another case fan inside with scythe typhoons.  My temps usually read around 40 C for the cpu and 30 C for the motherboard.  Which...isn't bad I guess?  I really don't know what temps are considered good.

Offline oscillik

  • Posts: 410
  • Location: England
    • music podcasts
Re: Post your rig
« Reply #295 on: Fri, 27 September 2013, 09:59:07 »
Provided you can keep the rig cool, I like the smaller cases too.  Both of my last two purchases have been smaller cases.

I was worried about that too so I replaced the stock front fan that it came with and added another case fan inside with scythe typhoons.  My temps usually read around 40 C for the cpu and 30 C for the motherboard.  Which...isn't bad I guess?  I really don't know what temps are considered good.

For a case so small and tight, I'd say those were good temps!
HHKB Pro 2 55g with PBT Spacebar Realforce 23UB CODE Keyboard MX Clear

Offline tipo33

  • Posts: 395
  • Location: www.leningrad.spb.ru
  • "Ski"
Re: Post your rig
« Reply #296 on: Fri, 27 September 2013, 16:58:08 »
Here's my big sexy beast.  He's an Inwin Q500N made in the late 90s/early 00s.  Been cut 120mm fan holes on the rear top and front bottom of the tower but man it's a pain in the rear to cut through the steel -_-

Motherboard: Gigabyte 890GPA-UD3H
CPU: Phenom II X6 1100T Black Edition
Ram: Corsair XMS 4GB X2
Graphics Card: MSI R6870 Twin Frozr II
HDD: Seagate Barracuda 1TB
PSU: Antec EarthWatts 750 Watt Power Supply
Keyboard: NMB Right Touch
OS: Windows XP/Ubuntu

I own that exact case!!
KM4COL    R.I.P.  SmallFry

Offline tanilolli

  • Posts: 11
  • Location: Canada
  • ಠ_ಠ
    • The Tech Zone Live
Re: Post your rig
« Reply #297 on: Mon, 30 September 2013, 09:57:28 »

LEDs: Blue NZXT Sleeved Kit



CPU: i7 2600K
O.C: 4.4GHz
Cooler: Noctua NH-D14
GPU: MSI R7970 3GB
RAM: Mushkin 16 GB
Motherboard: Asus P8P67
Case: Corsair Obsidian 650D
Storage: 300GB Intel SSD, 1TB internal, 1.5TB external backup

I'm running pretty low on space at the moment, so my next upgrade will probably be new drives.
Leopold FC200RT/AB Cherry MX Browns

Offline microsoft windows

  • Blue Troll of Death
  • * Exalted Elder
  • Posts: 3621
  • President of geekhack.org
    • Get Internet Explorer 6
Re: Post your rig
« Reply #298 on: Mon, 30 September 2013, 16:07:37 »
Here's my big sexy beast.  He's an Inwin Q500N made in the late 90s/early 00s.  Been cut 120mm fan holes on the rear top and front bottom of the tower but man it's a pain in the rear to cut through the steel -_-

Motherboard: Gigabyte 890GPA-UD3H
CPU: Phenom II X6 1100T Black Edition
Ram: Corsair XMS 4GB X2
Graphics Card: MSI R6870 Twin Frozr II
HDD: Seagate Barracuda 1TB
PSU: Antec EarthWatts 750 Watt Power Supply
Keyboard: NMB Right Touch
OS: Windows XP/Ubuntu

That's a nice computer you got there. Always been a fan of full towers. I've got a couple full tower machines on my personal fleet.
CLICK HERE!     OFFICIAL PRESIDENT OF GEEKHACK.ORG    MAKE AMERICA GREAT AGAIN MERRY CHRISTMAS

Offline RapidCancel

  • Posts: 35
Re: Post your rig
« Reply #299 on: Tue, 01 October 2013, 13:23:00 »
For a case so small and tight, I'd say those were good temps!

Thanks!  Can anyone school me a bit on water cooling?  Is it that much cooler?  Worth it over air cooling?