ಠ_ಠ [LF] F2 Blue Skull MX for Hack Orange Skull MX

[jdcarpe]

I would like one of the winkeyless pcb from you. Sent you a PM, sir!

[ninjadoc]

I would like the other  MX Mini PS2AVR PCB + USB Extender kit . PM sent

[zenuty]

just for a question, does those imsto have any "bad" key? i mean, are all four side of a keycap is straight? because one of my imsto keycap bend inside, and it get stuck with the costar stabilizer .

Sorry i cant understand your reply 
My Imsto Thick PBT keycap is A Brand New.

Imsto PBT side angle is sharpness.
And i have other PBT Extra keycaps.

if you have anything else question, let me know 

[zenuty]

I would like one of the winkeyless pcb from you. Sent you a PM, sir!

Just Sent you pm

I would like the other  MX Mini PS2AVR PCB + USB Extender kit . PM sent

You got pm !

Totally i have MX MINI PS2AVR PCB 2Set

[jonathanyu]

just for a question, does those imsto have any "bad" key? i mean, are all four side of a keycap is straight? because one of my imsto keycap bend inside, and it get stuck with the costar stabilizer .

Sorry i cant understand your reply 
My Imsto Thick PBT keycap is A Brand New.

Imsto PBT side angle is sharpness.
And i have other PBT Extra keycaps.

if you have anything else question, let me know 

Have you try them on a costar stabilizer board? because one of my imsto keycap are "too thick" on a costar stabilzer board, but it work on a cherry stabilizer
I know it is quite strange

[Photoelectric]

Is your spacebar straight?  (if you're talking about your spacebar).  I have a thick PBT Cherry profile set (by Vortex) on one of my Filcos (Costar stabilizers), and it has no grinding issues.  I'd inspect any key that grinds and make sure you put it on properly and that it's straight (might need to be held in very hot water for a minute and straightened).

[zenuty]

http://www.keyboardlover.com/img/CostarStabilizers.JPG

Your PCB is this stbilizer right ?
Sorry i cant find reasons.

Metoo i have still seen other problems

[jonathanyu]

Is your spacebar straight?  (if you're talking about your spacebar).  I have a thick PBT Cherry profile set (by Vortex) on one of my Filcos (Costar stabilizers), and it has no grinding issues.  I'd inspect any key that grinds and make sure you put it on properly and that it's straight (might need to be held in very hot water for a minute and straightened).

This problem only occur in my right enter. I think it is because my keycap of the enter is not straight. the first time that I put the keycap on the enter key, I press down the enter key and it didn't come up. So I used a cutter to plane it, it get much better, but at lease it didn't get stuck with the stabilizer any more. 

http://www.keyboardlover.com/img/CostarStabilizers.JPG

Your PCB is this stbilizer right ?
Sorry i cant find reasons.

Metoo i have still seen other problems

that's right. I think is because of the keycap is not straight 

[Photoelectric]

Is your spacebar straight?  (if you're talking about your spacebar).  I have a thick PBT Cherry profile set (by Vortex) on one of my Filcos (Costar stabilizers), and it has no grinding issues.  I'd inspect any key that grinds and make sure you put it on properly and that it's straight (might need to be held in very hot water for a minute and straightened).

This problem only occur in my right enter. I think it is because my keycap of the enter is not straight. the first time that I put the keycap on the enter key, I press down the enter key and it didn't come up. So I used a cutter to plane it, it get much better, but at lease it didn't get stuck with the stabilizer any more. 

http://www.keyboardlover.com/img/CostarStabilizers.JPG

Your PCB is this stbilizer right ?
Sorry i cant find reasons.

Metoo i have still seen other problems

that's right. I think is because of the keycap is not straight 

If it is warped, try putting it in hot boiled water for a minute, then take out with some utencil and straighten it as it cools off.  Might need to repeat a couple of times.

[jonathanyu]

Is your spacebar straight?  (if you're talking about your spacebar).  I have a thick PBT Cherry profile set (by Vortex) on one of my Filcos (Costar stabilizers), and it has no grinding issues.  I'd inspect any key that grinds and make sure you put it on properly and that it's straight (might need to be held in very hot water for a minute and straightened).

This problem only occur in my right enter. I think it is because my keycap of the enter is not straight. the first time that I put the keycap on the enter key, I press down the enter key and it didn't come up. So I used a cutter to plane it, it get much better, but at lease it didn't get stuck with the stabilizer any more. 

http://www.keyboardlover.com/img/CostarStabilizers.JPG

Your PCB is this stbilizer right ?
Sorry i cant find reasons.

Metoo i have still seen other problems

that's right. I think is because of the keycap is not straight 

If it is warped, try putting it in hot boiled water for a minute, then take out with some utencil and straighten it as it cools off.  Might need to repeat a couple of times.

 ;)thank you for the advice, going to try this right now.

[Photoelectric]

PBT becomes very soft when heated, so be careful to not warp it in other places!  Also it's going to be very hot to touch   But that is how people straighten out warped PBT spacebars.
---
Sorry Zenuty for derailing your thread!!

[zenuty]

PBT becomes very soft when heated, so be careful to not warp it in other places!  Also it's going to be very hot to touch   But that is how people straighten out warped PBT spacebars.
---
Sorry Zenuty for derailing your thread!!

No Problems ! Never Mind 

[remedyhalopc]

Aww man. I wanted that MX Mini PCB. 

[zenuty]

Aww man. I wanted that MX Mini PCB.

Sorry MX MIN PCB All gone 

[jonathanyu]

PBT becomes very soft when heated, so be careful to not warp it in other places!  Also it's going to be very hot to touch   But that is how people straighten out warped PBT spacebars.
---
Sorry Zenuty for derailing your thread!!

problem solve, feel a lot better now

[zenuty]

PBT becomes very soft when heated, so be careful to not warp it in other places!  Also it's going to be very hot to touch   But that is how people straighten out warped PBT spacebars.
---
Sorry Zenuty for derailing your thread!!

problem solve, feel a lot better now

Grats !! 

[Thechemist]

Ygpm.

[zenuty]

Ygpm.

Yspm

[bueller]

Are the IMSTO Purple on White Dye Subs still available?

[Sent]

If only you were selling that Graphite set, Zenuty bro. 

[zenuty]

Are the IMSTO Purple on White Dye Subs still available?

Sorry im still have plan to sell purple on whihte 

Now sell to Gray and Cherry legend color rgb Dysub.

[zenuty]

If only you were selling that Graphite set, Zenuty bro. 

if i sell to graphite separately i will send to you pm
its ok ?

[Sent]

if i sell to graphite separately i will send to you pm
its ok ?

Yes, please.    Zenuty, if you ever sell me that set, I will love you forever.  )

[RolandoWilkins]

ಠ_ಠ  Wellcome to zenuty's market

i cant speek to english well. verry sorry....

im preparing to some BouNus Gift.
i will try my best Service and Sell to you !!!


!!!! I always looking for Click Clack MX & Brobot MX !!!! 


[ Whats I Looking For ]

Show Image

[ Whats I have ]

Show Image

- CC Skull Hack Orange Topre
- CC Skull 3D MX
- CC 420 RED MX, CC 420 GREEN MX
- CC Mint Gum Blank WASD MX
- Brobot BLUE MX, Brobot
   
- KBD G.B Graphite
URL : http://imgur.com/a/t9UCl

- R1 Dolch Replica

- R4 R3 Dolch Replica

- 356N MK II PCB + Plate Set ( Winkey 87 key Layout )

- 356mini PCB + Plate Set ( Winkey 87 key Layout )
 
- Cash $$$$$$$ [/b]

Show Image

* Drawing By Binge.



======== WTS ============================================





[ A ] IMSTO THICK DYESUB Cherry Font, RGB, PBT Set
       / $ 80 USD ( included shipping fee )
     
      - Made by imsto China / Cherry MX KeyCap
      - Compatible All MX keyboard ( Cherry, Filco, others )
      - Condition : A Brand New, Keycap is PBT and Thick   
   

Show Image

Show Image

Show Image

[ B ] IMSTO THICK DYESUB GRAY PBT Set
       / $ 80 USD ( included shipping fee )
     
      - Made by imsto China / Cherry MX KeyCap
      - Compatible All MX keyboard ( Cherry, Filco, others )
      - Condition : A Brand New, Keycap is PBT and Thick

Show Image

 

Show Image

Show Image

[ C ] MX Mini PS2AVR PCB + USB Extender kit
       / GONE ( included shipping fee )
     
      - MX MINI LAYOUT PCB, Included Cheap Set
      - Basically It is support to PS2, But USB Extender Can Be Change PS2 to USB Conection.
      - Support to Full led light, Infinite Fast Input, Dual Input.
      - Firmware work completed.
        URL : http://winkeyless.kr/entry/MXmini-ps2avr-기판-조립-가이드
        URL : http://winkeyless.kr/entry/ps2avrext2

Show Image

[ D ] Cherry Winkeyless PCB + Ergo 62g Clear MX Switch Set  + Extra Clear MX Switch
       / GONE ( included shipping fee )
     
      - Cherry Vintage winkeyless PCB, ANSI USA Layout, Ergo 62g Clear MX Switch
      - It was finished PS2 Cable Work
      - Included Extra Clear MX Switch About Quantity of Number Pad Vintage Black MX Switch.

Show Image

ಠ_ಠ  BONUS !!!
If you buy my stuff, i will be Some Random Send to you !!!

Show Image

Show Image

Show Image

* Shipping information

- Shipping fee will depend on weight and distance.
  if you need to tracking and Fast shipping, let me know ^^

- AirMail / $ 7 ~ 10 USD / Approxiemtely 2 weeks /  Not Supprot Tracking / Slow Speed, Verry Cheap
- Priority / $ 20 ~ 30 USD  / Aproximetely 1 weeks / Support Tracking / Normal Speed, Cheap
- EMS / $ 30 ~ 50 USD / Aproximetely 3 days / Support Tracking / Verry Fast, But Expensive



* Payment information    

Please pay to my paypal



* Next Coming Soon Sale Stuff

NOTTHING

Hello friend you are offering very good products.. is the offer still going on?Please reply thanks in advance:)

[zenuty]

To RolandoWilkins

Yes im still sell to my stuff
if you have question let me know 

[Jocelyn]

You updated the thread, but never bumped it

[danielucf]

good luck with sale and/or trade zenuty

[zenuty]

You updated the thread, but never bumped it

Jocelyn
Thankyou very much bump it

good luck with sale and/or trade zenuty

Danielucf
Thankyou ^__^

[jonathanyu]

  those boards look really good!  And what is 40g spring 

[moogle]

_

[Glenn315]

All of your pictures and of course the things you're selling look nice. 

[zenuty]

love that custom dolch keyboard

You aloso like Dolch ? ^_^

those boards look really good!  And what is 40g spring 

Yes Dolch keyboard used good parts

All of your pictures and of course the things you're selling look nice. 

Thankyou very much

[zenuty]

Sold IMSTO DYESUB RGB Set

And Update !

[moogle]

_

[zenuty]

Sold Custom Dolch keyboard + Dolch Keycap Set

More update 

[Photoelectric]

That Reuters keyboard is so classy!  You've done so well putting it together.

[zenuty]

That Reuters keyboard is so classy!  You've done so well putting it together.

Yes I love Reuters Keyboard
I wonder Orange keyset looks very nice combo 

[HackJoe]

If the Red Alert set is still available could you post pictures?

J.

[zenuty]

If the Red Alert set is still available could you post pictures?

J.

Whats you means ?
You means RedAlert Tsangan Pack ?

Its still available.

[j2c8w6f8]

pmed

[HackJoe]

Whats you means ?
You means RedAlert Tsangan Pack ?

Its still available.

Sorry, just read that Tsangan won't work with my Poker2. I'm never gonna find a RA set..

J.

[zenuty]

Yes its not Modi kit
This is winkeyless kit

Whats you means ?
You means RedAlert Tsangan Pack ?

Its still available.

Sorry, just read that Tsangan won't work with my Poker2. I'm never gonna find a RA set..

J.

[zenuty]

Qwerkeys Red Pack SOLD
RedAlert Round2 Tsangan Pack SOLD

NEW UPDATE 

[bueller]

EDIT: I don't know why I didn't think to just look at the pictures, I should get some sleep!

[Tym]

Zenuty your avatar is always so stern 

[ninjadoc]

PM'ed

[BunnyLake]

sent pm

[GeeNDL82]

Pmed

[zenuty]

Pmed

I was response about all pm !

[pmh1410]

i will take Sanctuary set, please help me get it