Author Topic: Skeldon Phantom Case GB [Getting ready to ship TO YOU!] (Read 52639 times)

KuhnTang · « **Reply #50 on:** Tue, 11 June 2013, 18:57:52 »

Quote from: AKIMbO on Tue, 11 June 2013, 17:55:42

Dang...every other color is getting love except purple.

0 for gold as well.

KuhnTang · « **Reply #51 on:** Tue, 11 June 2013, 19:04:26 »

Just tried to fill out the order form and it appears that gold is not an option. Can I start the count at one for gold?

Jupiter · « **Reply #52 on:** Tue, 11 June 2013, 19:06:31 »

Quote from: metalliqaz on Tue, 11 June 2013, 18:55:56

Quote from: Jupiter on Tue, 11 June 2013, 17:59:36
I wonder how many orders this will actually get. My bet is on 20-25

Actually I'm worried we won't hit MOQ

All we can do is wait and see. It's been less than 24 48 hours since this went up and we have 5-6 already.

jdcarpe · « **Reply #53 on:** Tue, 11 June 2013, 19:57:59 »

Gold anodizing is only for plates, not cases.

UPDATE
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost.

i3oilermaker · « **Reply #54 on:** Tue, 11 June 2013, 20:09:30 »

Form updated with JD's new plates

boost · « **Reply #55 on:** Tue, 11 June 2013, 20:13:52 »

Quote from: jdcarpe on Tue, 11 June 2013, 19:57:59

Gold anodizing is only for plates, not cases.

UPDATE
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost.

Woot!!!!

Big thanks to jd for this. I owe you a few beers jd!

Jupiter · « **Reply #56 on:** Tue, 11 June 2013, 20:14:35 »

Sweet! How do we change our orders? Want to change mine to ANS125

i3oilermaker · « **Reply #57 on:** Tue, 11 June 2013, 20:18:50 »

PM me for changes

rindorbrot · « **Reply #58 on:** Tue, 11 June 2013, 23:43:44 »

Ah ok, I forgot about the QFRs controller.
That will not fit, yes.

We need more plate options! I want ISO150 with 1.75x right Shift + 1x key right of it.

Also boiler, please separate the options of top case (winkey or winkeyless) and plates (ANSI, ISO, 125, 150, ... ).

Wraul · « **Reply #59 on:** Wed, 12 June 2013, 00:44:33 »

Quote from: jdcarpe on Tue, 11 June 2013, 19:57:59

If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost.

Thank you. I will soon place my order.

One more question.
I might want to order 2 cases with different plates. If I can convince my friend to get one.
How would I do this? I can't see any way to do this using the form.

SmallFry · « **Reply #60 on:** Wed, 12 June 2013, 00:45:47 »

In the OP it mentions to submit the form more than once.

KuhnTang · « **Reply #61 on:** Wed, 12 June 2013, 00:50:15 »

In the interest check I believe it mentioned we could get any color anodized from the picture of colors. I would like gold. Since you're already doing the plates in gold can I get my case in gold?

Wraul · « **Reply #62 on:** Wed, 12 June 2013, 00:54:22 »

Quote from: SmallFry on Wed, 12 June 2013, 00:45:47

In the OP it mentions to submit the form more than once.

Whoops.
And I thought I read everything carefully.
Sorry.

Thank you.

SmallFry · « **Reply #63 on:** Wed, 12 June 2013, 00:55:42 »

NP, more Phantoms in the world is always a good thing!

BimboBB · « **Reply #64 on:** Wed, 12 June 2013, 03:30:02 »

Quote from: jdcarpe on Tue, 11 June 2013, 19:57:59

UPDATE
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost.

Dammit....guess now I am down to one.

However something needs to be changed in the order form regarding plate options, or at least separate winkey/winkeyless options from plate options.

Also are there any pictures from the case when he got chamfered?

i3oilermaker · « **Reply #65 on:** Wed, 12 June 2013, 08:33:57 »

Quote from: Wraul on Wed, 12 June 2013, 00:44:33

Quote from: jdcarpe on Tue, 11 June 2013, 19:57:59
If not having options for ANSI 125, ISO 125, or ISO 150 layouts was holding anyone back from ordering, well, you have no excuse now. I just added those plate designs and sent the files to boost.

Thank you. I will soon place my order.

One more question.
I might want to order 2 cases with different plates. If I can convince my friend to get one.
How would I do this? I can't see any way to do this using the form.

Complete the form twice.

i3oilermaker · « **Reply #66 on:** Wed, 12 June 2013, 10:12:56 »

Awesome Update

Thanks to kaiserreich for looking into a new shipping option, we are able to offer internation shipping on 1 unit for $63.

If there are more than 1 units, this will go up, but not double. The form is updated, and orders already placed are updated.

boost · « **Reply #67 on:** Wed, 12 June 2013, 10:29:40 »

Another update

More plates created thanks to jd

jdcarpe · « **Reply #68 on:** Wed, 12 June 2013, 10:32:22 »

Quote from: boost on Wed, 12 June 2013, 10:29:40

Another update

More plates created thanks to jd

Options are available now for:

ANSI 125, ANSI 150, ISO 125, ISO 150. Any of these can be had with 1.75x short right shift (with 1x key to the right of it), and/or split backspace.

boost · « **Reply #69 on:** Wed, 12 June 2013, 10:52:01 »

Thinking of getting ansi150 with split backspace because I want the bs setup like the hhkb

Acetrak · « **Reply #70 on:** Wed, 12 June 2013, 10:52:58 »

Quote from: boost on Wed, 12 June 2013, 10:52:01

Thinking of getting ansi150 with split backspace because I want the bs setup like the hhkb

Attaboy boost

metalliqaz · « **Reply #71 on:** Wed, 12 June 2013, 10:54:15 »

Okay so now I have to update my order to select a plate. Resubmit?

boost · « **Reply #72 on:** Wed, 12 June 2013, 10:54:38 »

Quote from: Acetrak on Wed, 12 June 2013, 10:52:58

Quote from: boost on Wed, 12 June 2013, 10:52:01
Thinking of getting ansi150 with split backspace because I want the bs setup like the hhkb
Attaboy boost

Pfft. You don't even has a phantom..

boost · « **Reply #73 on:** Wed, 12 June 2013, 10:54:56 »

Quote from: metalliqaz on Wed, 12 June 2013, 10:54:15

Okay so now I have to update my order to select a plate. Resubmit?

Nah. Just send boiler a pm

i3oilermaker · « **Reply #74 on:** Wed, 12 June 2013, 10:55:09 »

Quote from: metalliqaz on Wed, 12 June 2013, 10:54:15

Okay so now I have to update my order to select a plate. Resubmit?

Please just PM updates

jdcarpe · « **Reply #75 on:** Wed, 12 June 2013, 10:58:02 »

Quote from: boost on Wed, 12 June 2013, 10:52:01

Thinking of getting ansi150 with split backspace because I want the bs setup like the hhkb

Yep, I'm thinking of changing mine to that, too. That would be ANSI 150 w/Short Right Shift and Split Backspace.

So, you're going to design another top with 1.5x blockers on the ends, instead of the winkey blockers, right??

rindorbrot · « **Reply #76 on:** Wed, 12 June 2013, 11:26:24 »

Is the cable hole just a straight hole or is there any kind of retention in there?

Also when will all the new plates and options be available in the form?

i3oilermaker · « **Reply #77 on:** Wed, 12 June 2013, 11:33:16 »

Quote from: rindorbrot on Wed, 12 June 2013, 11:26:24

Is the cable hole just a straight hole or is there any kind of retention in there?

Also when will all the new plates and options be available in the form?

They should be an option now.

rindorbrot · « **Reply #78 on:** Wed, 12 June 2013, 11:47:04 »

But where can I select the extra options (1.75x right shift or split backspace)?
And I still think the plate layout should be a separate option from the top case (winkey-blockers or not).

KuhnTang · « **Reply #79 on:** Wed, 12 June 2013, 18:19:10 »

Why can't we anodize the case Gold?

jdcarpe · « **Reply #80 on:** Wed, 12 June 2013, 18:21:26 »

Quote from: KuhnTang on Wed, 12 June 2013, 18:19:10

Why can't we anodize the case Gold?

Cuz it's boost's case and he don't wanna?

You can re-anodize anything you want after you get it. KMAC, LZ, Skeldon case, whatever.

boost · « **Reply #81 on:** Wed, 12 June 2013, 18:35:09 »

If 4 ppl want gold it can be done

tsangan · « **Reply #82 on:** Wed, 12 June 2013, 19:36:24 »

Quote from: boost on Wed, 12 June 2013, 18:35:09

If 4 ppl want gold it can be done

If it's like this shade of gold I will take one, but iirc that's real gold plating, if you could do that too I would take one also

User: 김재연/메룩스짱

Source: http://www.kbdmania.net/xe/index.php?mid=photo&page=163&document_srl=5346586

i3oilermaker · « **Reply #83 on:** Wed, 12 June 2013, 19:40:57 »

Gold color is in OP

tsangan · « **Reply #84 on:** Wed, 12 June 2013, 19:43:17 »

Quote from: i3oilermaker on Wed, 12 June 2013, 19:40:57

Gold color is in OP

That's a bronzy yellow!

But okay :behindcouch:

BimboBB · « **Reply #85 on:** Thu, 13 June 2013, 02:36:42 »

Quote from: i3oilermaker on Wed, 12 June 2013, 11:33:16

Quote from: rindorbrot on Wed, 12 June 2013, 11:26:24
Is the cable hole just a straight hole or is there any kind of retention in there?

Also when will all the new plates and options be available in the form?

They should be an option now.

Nope. Still no options for splitted shift/backspace and also case options and plate options still not separated, so when you want ANSI 150 you cannot choose if winkey or winkeyless case.

Moosecraft · « **Reply #86 on:** Thu, 13 June 2013, 02:48:29 »

Awesome chance for something really unique..
If only I had a phantom..

Wraul · « **Reply #87 on:** Thu, 13 June 2013, 03:37:04 »

Quote from: BimboBB on Thu, 13 June 2013, 02:36:42

Nope. Still no options for splitted shift/backspace and also case options and plate options still not separated, so when you want ANSI 150 you cannot choose if winkey or winkeyless case.

This is whats keeping me from placing a order.

gizzard · « **Reply #88 on:** Thu, 13 June 2013, 11:46:01 »

submitted a second order to replace my first

KuhnTang · « **Reply #89 on:** Thu, 13 June 2013, 12:26:40 »

Can you add the Gold anodizing to the order form so I can submit my order?

Thanks

i3oilermaker · « **Reply #90 on:** Thu, 13 June 2013, 12:44:46 »

Quote from: gizzard on Thu, 13 June 2013, 11:46:01

submitted a second order to replace my first

Got it - For everyone else please just PM updates to me

Quote from: KuhnTang on Thu, 13 June 2013, 12:26:40

Can you add the Gold anodizing to the order form so I can submit my order?

Thanks

Done

rindorbrot · « **Reply #91 on:** Thu, 13 June 2013, 14:49:02 »

Can you please also add the extra layout options? (short shift, split backspace)
And make the top cover a separate choice? (winkey or with blockers)

Then I can submit my order

i3oilermaker · « **Reply #92 on:** Thu, 13 June 2013, 14:50:45 »

Quote from: rindorbrot on Thu, 13 June 2013, 14:49:02

Can you please also add the extra layout options? (short shift, split backspace)
And make the top cover a separate choice? (winkey or with blockers)

Then I can submit my order

I need to confirm those options with boost.

duq · « **Reply #93 on:** Thu, 13 June 2013, 16:06:36 »

Quote from: rindorbrot on Thu, 13 June 2013, 14:49:02

Can you please also add the extra layout options? (short shift, split backspace)
And make the top cover a separate choice? (winkey or with blockers)

Then I can submit my order

+1 interest is dependent on the availability of this option.

boost · « **Reply #94 on:** Thu, 13 June 2013, 16:13:59 »

I got like 10+ plate designs from JD. WHen I get home I'll give boiler the info and he will update.

Thanks
Bost

kaiserreich · « **Reply #95 on:** Thu, 13 June 2013, 19:29:13 »

Do you guys have a ballpark time frame on when this will ship?

gizzard · « **Reply #96 on:** Thu, 13 June 2013, 20:15:47 »

Quote from: i3oilermaker on Thu, 13 June 2013, 12:44:46

Quote from: gizzard on Thu, 13 June 2013, 11:46:01
submitted a second order to replace my first

Got it - For everyone else please just PM updates to me

Cool beans.. Thanks

Another question... I assume by ANSI125 you mean the Phantom ANSI 125 92key? Will this have cutout space above the arrows for the additional 5 keys?

Thanks
Chris

litster · « **Reply #97 on:** Thu, 13 June 2013, 21:27:16 »

Yes, more Phantoms!

mtl · « **Reply #98 on:** Thu, 13 June 2013, 21:54:47 »

Does this case have feet?

boost · « **Reply #99 on:** Thu, 13 June 2013, 22:06:08 »

Quote from: gizzard on Thu, 13 June 2013, 20:15:47

Quote from: i3oilermaker on Thu, 13 June 2013, 12:44:46
Quote from: gizzard on Thu, 13 June 2013, 11:46:01
submitted a second order to replace my first

Got it - For everyone else please just PM updates to me

Cool beans.. Thanks

Another question... I assume by ANSI125 you mean the Phantom ANSI 125 92key? Will this have cutout space above the arrows for the additional 5 keys?

Thanks
Chris

no, 87key

Quote from: mtl on Thu, 13 June 2013, 21:54:47

Does this case have feet?

Yes, 4 rubber feet.

News:

Author Topic: Skeldon Phantom Case GB [Getting ready to ship TO YOU!] (Read 52639 times)