[FS] ListoKei's Sale - Korean custom keyboard tuner [Update acrylic 60%]

[pmh1410]

Still, $620 is very steep for a 60% keyboard.  I've done some napkin calculations of material costs + shipping + PayPal fee, and you're still making over $100 in profit for labor and "tuning" (which requires cheap materials, so it's just another word for "labor").

I think that his price was reasonnable because Kmac Happy was included DSA retro full keyset. It's my opinion.


@ ListoKei: GLWS

[Photoelectric]

I included hat into my estimate (say $85 max for that 60% set).  Anyway, I've put in my bit, not here to argue

[meiosis]

I included hat into my estimate (say $85 max for that 60% set).  Anyway, I've put in my bit, not here to argue

He quoted me at $499 probably not including shipping when he first came here.  Calculation wise you need to cater to exactly what was put in.

Let's say we start from the beginning:
kbdmod.com sells KMAC happy kit 380,000W
$340+Shipping($12)
$352 for the kit, not including anything other than PCB,Plate,Case
-

Switches: $50 for good measure
Stickers+Lube: $8 being cheap
Springs:$10
Have you ever stickered and lubed 50+ switches in one sitting? it honestly is a tasking job on my mental state, it will take at least 2 hours to do it "perfectly"
-
$58+8+10
-
$76

$352+$76=$428

Let's not forget assembly of soldering and such a common rate on this forum is lets say $40 minus back and forth shipping?

x+30=$458

So yeah you are essentially paying him $40 in profit to have an assembled board, are you really going to chastise him for $40, especially since he even went out of his way to get a vendor badge which denotes "for profit" selling on this forum ;p.

But yeah, I'm not saying its right or wrong, just that I usually calculate before buying


Good luck Listokei, your acrylic work is really good, do you make casings for Filco?

[Photoelectric]

That was close to my calculation, Meiosis.  I had under $500 for parts + shipping + fees.  Hence >$100 profit.
(Yes, I've stickered and lubed and replaced springs in over 2 TKL boards' worth of switches.  And one of them was an o-ring Jailhouse Blues mod, where every blue stem had to have a piece of silicone o-ring go in just so.)

[pmh1410]

I included hat into my estimate (say $85 max for that 60% set).  Anyway, I've put in my bit, not here to argue

He quoted me at $499 probably not including shipping when he first came here.  Calculation wise you need to cater to exactly what was put in.

Let's say we start from the beginning:
kbdmod.com sells KMAC happy kit 380,000W
$340+Shipping($12)
$352 for the kit, not including anything other than PCB,Plate,Case
-

Switches: $50 for good measure
Stickers+Lube: $8 being cheap
Springs:$10
Have you ever stickered and lubed 50+ switches in one sitting? it honestly is a tasking job on my mental state, it will take at least 2 hours to do it "perfectly"
-
$58+8+10
-
$76

$352+$76=$428

Let's not forget assembly of soldering and such a common rate on this forum is lets say $40 minus back and forth shipping?

x+30=$458

So yeah you are essentially paying him $40 in profit to have an assembled board, are you really going to chastise him for $40, especially since he even went out of his way to get a vendor badge which denotes "for profit" selling on this forum ;p.

But yeah, I'm not saying its right or wrong, just that I usually calculate before buying


Good luck Listokei, your acrylic work is really good, do you make casings for Filco?

You wasn't calculed led, resisters, soldering fee, stabilizer and paypal fee. Sticker + lubed was 8$ ------------> very cheap.

[meiosis]

I included hat into my estimate (say $85 max for that 60% set).  Anyway, I've put in my bit, not here to argue

He quoted me at $499 probably not including shipping when he first came here.  Calculation wise you need to cater to exactly what was put in.

Let's say we start from the beginning:
kbdmod.com sells KMAC happy kit 380,000W
$340+Shipping($12)
$352 for the kit, not including anything other than PCB,Plate,Case
-

Switches: $50 for good measure
Stickers+Lube: $8 being cheap
Springs:$10
Have you ever stickered and lubed 50+ switches in one sitting? it honestly is a tasking job on my mental state, it will take at least 2 hours to do it "perfectly"
-
$58+8+10
-
$76

$352+$76=$428

Let's not forget assembly of soldering and such a common rate on this forum is lets say $40 minus back and forth shipping?

x+30=$458

So yeah you are essentially paying him $40 in profit to have an assembled board, are you really going to chastise him for $40, especially since he even went out of his way to get a vendor badge which denotes "for profit" selling on this forum ;p.

But yeah, I'm not saying its right or wrong, just that I usually calculate before buying


Good luck Listokei, your acrylic work is really good, do you make casings for Filco?

You wasn't calculed led, resisters, soldering fee, stabilizer and paypal fee. Sticker + lubed was 8$ ------------> very cheap.

True, LED as well would pump it another $20, but soldering+stabilizer is same as assembly fee which I put at $40 .

[Sifo]

If it's that cheap, are you interested in just selling an acrylic housing + pcb and parts? No assembly.

[jonathanyu]

I am interested in the acrylic housing too

[Neo.X]

That KMAC Happy is a really beauty.   

[MTManiac]

You do VERY good work!

[listokei]

That was close to my calculation, Meiosis.  I had under $500 for parts + shipping + fees.  Hence >$100 profit.
(Yes, I've stickered and lubed and replaced springs in over 2 TKL boards' worth of switches.  And one of them was an o-ring Jailhouse Blues mod, where every blue stem had to have a piece of silicone o-ring go in just so.)

Hi,

Are you seen new PS2avr PCB?

It's 100% hand soldering, all of ic chip, smd diode, smd resistor, USB port, Full LED and firmware update.

Is not same KMAC, Duck mini's PCB.

This mean more need time to assembly.

Thanks  )

[thebeargentile]

Just want to give a big thumbs up to ListoKei, he's been very professional and great to work with 

[GeeGee]

Just want to give a big thumbs up to ListoKei, he's been very professional and great to work with 

Agreed. Was a pleasure to do business with him, really recommend him.

[listokei]

Just want to give a big thumbs up to ListoKei, he's been very professional and great to work with 

Appreciate your comment for me. 

[listokei]

Just want to give a big thumbs up to ListoKei, he's been very professional and great to work with 

Agreed. Was a pleasure to do business with him, really recommend him.

Appreciate your comment for me. 

[listokei]

Update KMAC Diablo Edition!

Thank you 

[lcs]

Very nice

Do you take custom orders?

[___q]

For anyone who's on the fence about one of these, I figured I would put in my support for these boards.

I have a kingsaver made by listokei (this one, though this is his picture: http://listokei.gomdesign.com/king/_DSC3034.jpg), and I have no complaints about it.  The build quality is solid, there's no flex anywhere, and the colors are as nice as the pictures make them seem.  The lubing etc. of the switches seems fine (they are smooth, though I do not know how smooth they are stock).

It's not as heavy as a metal keyboard (it's even lighter than very light Al keyboards e.g. the cheat), but it comes in many more (and much brighter) colors!

[listokei]

Very nice

Do you take custom orders?

Hi,

Yes, Please tell me what do you want! 

If I can make, I'll help you get awesome custom keyboard!

Thank you 

[listokei]

For anyone who's on the fence about one of these, I figured I would put in my support for these boards.

I have a kingsaver made by listokei (this one, though this is his picture: http://listokei.gomdesign.com/king/_DSC3034.jpg), and I have no complaints about it.  The build quality is solid, there's no flex anywhere, and the colors are as nice as the pictures make them seem.  The lubing etc. of the switches seems fine (they are smooth, though I do not know how smooth they are stock).

It's not as heavy as a metal keyboard (it's even lighter than very light Al keyboards e.g. the cheat), but it comes in many more (and much brighter) colors!

Wow!

Nice to see you again! 

I was worried that the delivery was make problem.

Thank you for very satisfied with my work. 

Thank you!

[listokei]

Hi,

I have update YouTube 

If you wonder my work, Please watch YouTube 

Thanks!

[listokei]

Update!!

Duck mini V1 Mark5 Edition!

Cut down PS2AVR a87 price!!

Thank you 

[piberry]

willl join the auction
Duck 410$!

[listokei]

willl join the auction
Duck 410$!

Thank you 

[Neo.X]

awesome duck.

$415

[doclong]

430$ for Duck

[listokei]

Auction left about 24hour 

Thank you 

[Forsythe]

Very good price, if I didn't have a KMAC2, I might just buy this.

Details please check this link 
http://goo.gl/YyQfM1

Price is $370 $299
(Included PayPal fee, Worldwide EMS Shipping cost)

Thank you 

[listokei]

Very good price, if I didn't have a KMAC2, I might just buy this.

Details please check this link 
http://goo.gl/YyQfM1

Price is $370 $299
(Included PayPal fee, Worldwide EMS Shipping cost)

Thank you 

Thank you 

I think, GH people don't like blue switches 

So I decide "Hot SALE" 

Thank you   

[GeeNDL82]

great seller. I hope you will have more duck for sale

[Chase5delta]

I would assume Browns/Reds/Clears sell the best. It seems that not many people like blue or black.

[listokei]

I would assume Browns/Reds/Clears sell the best. It seems that not many people like blue or black.

Oh, I understand. 

Thank you 

[melt]

DUCK $500

[meiosis]

DUCK $500

Damn. well there went my sneaky bid

[listokei]

Auction left about 1 hour

[adamseto]

Duck $535

[melt]

duck $600

[listokei]

duck $600

Auction Finished!

Thank you 

[listokei]

Has update, shipping!

Thank you 

[aj-kun]

is it possible to order KMAC kit's from you? (if you have access to them)

[listokei]

Today!

Update LZ-HX!! 

Thank you 

[meiosis]

Today!

Update LZ-HX!! 

Thank you 

I might have to say thats the best looking bottom of a mini keyboard I've ever seen

[adamseto]

GLWS.

[rurushu]

Today!

Update LZ-HX!! 

Thank you 

very nice item listokei, this is comparable with duck v1 and 356mini!

[listokei]

GLWS.

Thank you

[listokei]

Today!

Update LZ-HX!! 

Thank you 

very nice item listokei, this is comparable with duck v1 and 356mini!

I think LZ-HX more unique better 356mini.

because LZ-HX is custom-made keyboard, I heard the only one!!

Thank you 

[Sent]

LZ-HX $450

[___q]

LZ-HX $500

[listokei]

Thank you!

Auction left about 23 hour!! 

[esoomenona]

Is that thing an authentic LifeZone board? I ask because it looks like the LZ engraving on it doesn't look like his other boards. It just seems to be a copy of the 356mini.