Author Topic: [WTB] DELL AT101 or SGI ALPs Key Caps (Read 14408 times)

elton5354 · « **on:** Sat, 19 October 2013, 01:44:56 »

As the title states, I'm looking for these key caps with 1.5x bottom modifiers for CTRL and ALT and 7x space bar I assume.

Thanks

Similar to this picture

More

Looking to sell my modded Poker X. Mixed MX blues, whites, reds. Installed is a steel poker plate. LEDs are all red.

Price: ~~$100 + shipping.~~ SOLD

Looking to buy one of each in grey colour.

Also looking for a Cherry "N" key cap in Black on White key cap

More

Poker/GH60 cases for sale

Acrylic case (green top and bottom with clear plates in between) - $50 + shipping SOLD
2x white case - $30 + shipping each - 1 SOLD
1x plasti dipped case (red) not the best job - $30 + shipping

More

Selling a silver KMAC Happy. Key caps are not included in the picture. Comes with MX Clear modded with 62g springs, stickered, and with white LEDs

I'll get better pictures later.

Price: $400 + shipping SOLD

More

Just received a butterfly key pad, so this will not be needed.

Modded it a bit with MX Blue switches along with stock red switches (I wanted MX blues, but was sent with MX Reds instead). Num Lock was modded with a pencil spring, so it's very heavy. Num lock LED is green.

Price: ~~$35 + shipping.~~ - SOLD

More

I have some that I would like to get rid of. Would like to get as much back as possible and only selling as a bundle. These are never used, only stored.

Price: SOLD

Picture

More

Bag of O-Rings

There are about 255 never used O-rings - I think they are the same size as WASD ones.
Price: ~~$20 shipped worldwide by letter~~ - SOLD

More

Novelty Crap Bag

There are 72 novelty key caps
Price: ~~$115 + shipping~~ - SOLD

More

Signature Plastics TKL Sets

Ragnorok TKL 87 Keys Set (Red on Black) - ~~$75 + shipping~~ - SOLD
Klaxon TKL 87 Key Set with tsangan kit and ISO kit (White on Red for both mods and alphas) - SOLD
CCnG TKL 87 Key Set with tsangan kit and ISO kit (Reversed Alphas - white on green) - ~~$110 + shipping~~ - SOLD

More

What is included:

Matias clicky alps
Dell AT101W key caps
Black case
Red stand/raiser
MX back plate and ALPS back plate (installed)

- This is compatible with Poker/GH60 PCBs if you desire to install it on this case.

Price? Best offer takes it.

Everything included with box weighs around 5 LB, so shipping may cost around $30 to USA with tracking. International will cost almost double that with no tracking.

___________________________________________________________________________________________________

Also selling LZ-GH with MX Clears lubed with krytox 205 and 105, 62g springs, and red switch stickers. Case is "wine red" in colour.

One problem with it: When I received it, one of the LED trace for the right ALT was broken. I had someone kind of taken care of it..that LED is still a bit wonky. Maybe you can fix it?
~~Price: $390 + shipping~~ - SOLD

Forever · « **Reply #1 on:** Sat, 19 October 2013, 01:50:47 »

Mayde you should start an auction just like others did these days.

Halverson · « **Reply #2 on:** Sat, 19 October 2013, 01:54:44 »

Quote from: Forever on Sat, 19 October 2013, 01:50:47

Mayde you should start an auction just like others did these days.

Yea that would be great

Did you remove the LEDs from it that didn't work elton?

Oh AND I AM SAD THAT YOU ARE SELLING. YOU WERE MY DUCK V2 TWIN BRO

elton5354 · « **Reply #3 on:** Sat, 19 October 2013, 01:56:03 »

Yeah, I removed them. I installed them the wrong way..I was stupid and didn't test one before installing the rest. I'm not bothering to install them the right way.

I need to start paying back OSAP

Halverson · « **Reply #4 on:** Sat, 19 October 2013, 01:56:38 »

Quote from: elton5354 on Sat, 19 October 2013, 01:56:03

Yeah, I removed them. I installed them the wrong way..I was stupid and didn't test one before installing the rest. I'm not bothering to install them the right way.

I'll install them for you if you decide not to sell!

I'll even give you a Zoroark!

elton5354 · « **Reply #5 on:** Sat, 19 October 2013, 02:03:46 »

Quote from: Halverson on Sat, 19 October 2013, 01:56:38

Quote from: elton5354 on Sat, 19 October 2013, 01:56:03
Yeah, I removed them. I installed them the wrong way..I was stupid and didn't test one before installing the rest. I'm not bothering to install them the right way.

I'll install them for you if you decide not to sell!

I'll even give you a Zoroark!

Lol, I have that one already.

Probably going to add 3 GH60s and their accessories to the list to sell, but probably not a good idea right now as the organizers aren't active in that GB atm.

Halverson · « **Reply #6 on:** Sat, 19 October 2013, 02:05:53 »

Quote from: elton5354 on Sat, 19 October 2013, 02:03:46

Quote from: Halverson on Sat, 19 October 2013, 01:56:38
Quote from: elton5354 on Sat, 19 October 2013, 01:56:03
Yeah, I removed them. I installed them the wrong way..I was stupid and didn't test one before installing the rest. I'm not bothering to install them the right way.

I'll install them for you if you decide not to sell!

I'll even give you a Zoroark!

Lol, I have that one already.

Probably going to add 3 GH60s and their accessories to the list to sell, but probably not a good idea right now as the organizers aren't active in that GB atm.

I was kind of sad to see it wasn't so rare

Well GLWS man! Hopefully someone grabs this amazing board and will become my new twin duck bro!!!

bazemk1979 · « **Reply #7 on:** Sat, 19 October 2013, 03:30:04 »

Elton how does the spacebar on the Alps board feels? I see it don't have stabilizers on it

elton5354 · « **Reply #8 on:** Sat, 19 October 2013, 03:31:39 »

The first picture was when it wasn't fully assembled. Right now, all the stabilizers are in place and I'm typing on it right now. The pictures after the first one are the ones I just took.

phetto · « **Reply #9 on:** Sat, 19 October 2013, 03:34:06 »

Very nice keyboards elton! Good luck, eh! :]

elton5354 · « **Reply #10 on:** Sat, 19 October 2013, 12:53:09 »

LZ GH sold! Thanks!

Photoelectric · « **Reply #11 on:** Sat, 19 October 2013, 13:05:06 »

Aw sad, but congratulations on selling it successfully so quickly. Good luck with your financial situation!

elton5354 · « **Reply #12 on:** Sat, 19 October 2013, 19:53:17 »

Quote from: Photoelectric on Sat, 19 October 2013, 13:05:06

Aw sad, but congratulations on selling it successfully so quickly. Good luck with your financial situation!

Yeah, I wanted to change the colour of it too. Oh well. Thanks

Also, DuckMini V2 is pending to a local GH member. I'm going to add some SP TKL sets soon.

Forever · « **Reply #13 on:** Sat, 19 October 2013, 20:52:22 »

Wow, Klaxon set. Can i order it?

elton5354 · « **Reply #14 on:** Sat, 19 October 2013, 22:09:24 »

Quote from: Forever on Sat, 19 October 2013, 20:52:22

Wow, Klaxon set. Can i order it?

Sold ~

Updated prices.

nubbinator · « **Reply #15 on:** Sat, 19 October 2013, 23:05:33 »

Would you be willing to part with just the Tsangan for the CCnG?

elton5354 · « **Reply #16 on:** Sat, 19 October 2013, 23:21:48 »

Quote from: nubbinator on Sat, 19 October 2013, 23:05:33

Would you be willing to part with just the Tsangan for the CCnG?

Looking to sell as a whole set only.

berserkfan · « **Reply #17 on:** Sat, 19 October 2013, 23:58:55 »

just a word (actually a paragraph) of support

you've been so great helping us with group buys; am very sorry (but not surprised

) to hear that you're short of cash. glws!

elton5354 · « **Reply #18 on:** Sun, 20 October 2013, 00:53:00 »

Quote from: berserkfan on Sat, 19 October 2013, 23:58:55

just a word (actually a paragraph) of support

you've been so great helping us with group buys; am very sorry (but not surprised ) to hear that you're short of cash. glws!

Thanks, but it has nothing to do with the GBs. It's my student loans I have to repay. They're taking a big chunk of change every month from my poor bank account.

berserkfan · « **Reply #19 on:** Sun, 20 October 2013, 08:24:12 »

Student loans, huh? I've heard that college fees have become truly exorbitant, and an entire generation is now severely indebted.

Quote from: elton5354 on Sun, 20 October 2013, 00:53:00

Quote from: berserkfan on Sat, 19 October 2013, 23:58:55
just a word (actually a paragraph) of support

you've been so great helping us with group buys; am very sorry (but not surprised ) to hear that you're short of cash. glws!

Thanks, but it has nothing to do with the GBs. It's my student loans I have to repay. They're taking a big chunk of change every month from my poor bank account.

saturnotaku · « **Reply #20 on:** Sun, 20 October 2013, 09:37:29 »

PM sent

elton5354 · « **Reply #21 on:** Tue, 22 October 2013, 01:06:47 »

Updated OP

pichu23 · « **Reply #22 on:** Tue, 22 October 2013, 01:13:32 »

Dear god, Bulba, Charmander, Pikachu... what a tease. $:-\$
I'd buy 1/2 that bag if I could lol. Just very very tight on budget till the next month.
Glws tho

elton5354 · « **Reply #23 on:** Thu, 24 October 2013, 14:56:29 »

ohgodpleaseno · « **Reply #24 on:** Thu, 24 October 2013, 16:42:39 »

What hardness are the O-Rings?

Photoelectric · « **Reply #25 on:** Thu, 24 October 2013, 17:31:04 »

Those kinda look like mcmaster-carr o-rings (which amazon repackages and resells)--if so, they are 50A. 50A Amazon o-rings are my favorite general purpose o-rings.

elton5354 · « **Reply #26 on:** Thu, 24 October 2013, 18:22:24 »

Quote from: ohgodpleaseno on Thu, 24 October 2013, 16:42:39

What hardness are the O-Rings?

Probably as photoelectric said, 50A. I bought it like 2 years ago and it's just sitting there lol. If the 50A the popular one, it's probably that.

With some digging, they're Buna-N soft o-rings.

swill · « **Reply #27 on:** Thu, 24 October 2013, 19:05:04 »

elton5354 · « **Reply #28 on:** Fri, 17 January 2014, 10:24:31 »

Added new things.

elton5354 · « **Reply #29 on:** Sun, 19 January 2014, 17:40:44 »

elton5354 · « **Reply #30 on:** Wed, 22 January 2014, 12:28:19 »

Looking for new thigns~

elton5354 · « **Reply #31 on:** Thu, 23 January 2014, 13:34:21 »

Still looking~

elton5354 · « **Reply #32 on:** Fri, 24 January 2014, 07:51:46 »

Looking

elton5354 · « **Reply #33 on:** Sun, 26 January 2014, 14:36:40 »

Still looking

Zeal · « **Reply #34 on:** Sun, 26 January 2014, 14:55:01 »

$11.32 each.

http://www.onlinecomponents.com/cherry-electrical-mx1a31nn.html?p=11075424

elton5354 · « **Reply #35 on:** Sun, 26 January 2014, 20:09:13 »

Thanks but too expensive

Looking to buy them for no more than a couple bucks each..

elton5354 · « **Reply #36 on:** Tue, 11 February 2014, 19:52:34 »

Added something new

hwood34 · « **Reply #37 on:** Tue, 11 February 2014, 19:56:59 »

I'll take the keypad

elton5354 · « **Reply #38 on:** Tue, 11 February 2014, 20:06:22 »

Quote from: hwood34 on Tue, 11 February 2014, 19:56:59

I'll take the keypad

Ok, PM me your info. It also includes the stock key caps.

elton5354 · « **Reply #39 on:** Tue, 01 April 2014, 20:52:33 »

updated op

mashby · « **Reply #40 on:** Wed, 02 April 2014, 11:05:17 »

Tranquilite · « **Reply #41 on:** Wed, 02 April 2014, 13:15:15 »

elton5354 · « **Reply #42 on:** Sat, 12 April 2014, 17:03:26 »

added an item

mashby · « **Reply #43 on:** Sat, 12 April 2014, 17:23:14 »

You bastard! Why tempt me with that KMAC Happy when the Viper is just around the corner. You're eviiiiiil!

Also, you're going to want to replace your photos with one that display the date and your GH username. It's all part of the new classifieds rules.

elton5354 · « **Reply #44 on:** Sat, 12 April 2014, 17:27:53 »

Should've posted it up with the cases so you would've bought them together!

Yeah, I'm aware of that. I'll do it when I get home around midnight.

Neo.X · « **Reply #45 on:** Sat, 12 April 2014, 18:34:41 »

OMG, what a beautiful happy! And you are in Toronto, this makes it even harder to rezist...but I must.

GLWS

Neal · « **Reply #46 on:** Sat, 12 April 2014, 18:38:47 »

If no one buys the Happy within 7 days, I will. (relatively long time for such an item!)
Even tho I'm not CONUS, We'll sort something out.

elton5354 · « **Reply #47 on:** Sat, 12 April 2014, 18:47:10 »

Hey Neo.X, we can so easily meet up at Sq.1 again

Neal. if I had to ship to The Netherlands, I'd want to ship it with tracking and that will probably cost $50+.

Sifo · « **Reply #48 on:** Sat, 12 April 2014, 19:37:52 »

Who needs a kmac happy when there's a viper eh?

GL I might grab one of the poker cases... just a maybe

dustinhxc · « **Reply #49 on:** Sat, 12 April 2014, 19:38:27 »

Damn that KMAC is beautiful. Love the hyperfuse on it.

News:

Author Topic: [WTB] DELL AT101 or SGI ALPs Key Caps (Read 14408 times)