Author Topic: [SPRiT] R1 R2 (Shipping 92% Completed)  (Read 1690133 times)

0 Members and 1 Guest are viewing this topic.

Offline pichu23

  • ୧༼ಠ益ಠ༽୨ FITE ME
  • * Esteemed Elder
  • Posts: 1586
  • Location: Littleroot Town, Hoenn
  • ʕ ͡·ᴥ ͡· ʔ
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1850 on: Thu, 06 March 2014, 18:43:04 »
Patience patience ... :x
Collection(s) : Ducky Shine 2 TKL x Poker II x 62g FaceW x 62g Gateron Black GON NerD TKL x 65g Z GON NerD 60

Offline RSSonic92

  • Posts: 80
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1851 on: Fri, 07 March 2014, 05:04:47 »
Hi Sprit,

MX Clear is a option?
If yes, I would like to switch from MX Brown to Clear and edit my order!
Plesse confirm :)

Edit: Updated my order to say that I would prefer MX Clear over MX Brown.
I would still like to be notified if MX Clear is possible or not, please, so I can edit my order to be less confusing for you guys.
« Last Edit: Fri, 07 March 2014, 10:02:09 by RSSonic92 »

Offline cookiesowns

  • Posts: 197
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1852 on: Fri, 07 March 2014, 22:49:47 »
Hi Sprit,

MX Clear is a option?
If yes, I would like to switch from MX Brown to Clear and edit my order!
Plesse confirm :)

Edit: Updated my order to say that I would prefer MX Clear over MX Brown.
I would still like to be notified if MX Clear is possible or not, please, so I can edit my order to be less confusing for you guys.

From what I can tell sprit may have already fulfilled all the orders with MX Clears, and since Cherry does not product them anymore, he might not be able to get additional stock.

It's worth a PM. Maybe he has just enough for you.

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1853 on: Sat, 08 March 2014, 01:23:36 »
Metal Case Sample Update   - Design 01 : Full Metal, more affordable, popular design.

More Pics are in the first page.

Apology for the delay!   These are Full Metal, More affordable Designs. Some details will be upgraded in the Final Version.   
100% Compatible with Acrylic Case,  Mix n Match ! 

Metal Feet and  H Bars for the F1-F12 will be prepared. 
Net Weight  :  60% Case   1.3KG (2.9 pounds) ,  87% Case  2.2KG (5 pounds)




56792-0  56802-1 
56794-2  56796-3   56798-4   56800-5   56804-6
« Last Edit: Sat, 08 March 2014, 10:00:32 by sprit »

Offline meiosis

  • * Esteemed Elder
  • Posts: 1281
  • Location: 408
  • Time
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1854 on: Sat, 08 March 2014, 01:37:19 »
Very nice design :) looks solid
Keyboards:
Filco Majestouch 2 - Sakura Edition [MX Blue]
Filco Majestouch 2 - Lotus Edition [MX Brown]
Realforce 23ub - Modded with 55g Domes.
Aripeko TKL

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1855 on: Sat, 08 March 2014, 01:44:58 »
Hmm, I was hoping for some angles/lines in the design of the metal cases. It looks pretty plain from my perspective.
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline witbliz

  • Posts: 120
I think the case is beautiful ! Just wondering how I can buy extra parts to mix n match. Wondering how it looks when switches are plate mounted and acryclic cover on top ? So curious ! Can't wait ! Thanks sprit!

Offline pichu23

  • ୧༼ಠ益ಠ༽୨ FITE ME
  • * Esteemed Elder
  • Posts: 1586
  • Location: Littleroot Town, Hoenn
  • ʕ ͡·ᴥ ͡· ʔ
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1857 on: Sat, 08 March 2014, 06:01:58 »
the case looks really solid :O
Collection(s) : Ducky Shine 2 TKL x Poker II x 62g FaceW x 62g Gateron Black GON NerD TKL x 65g Z GON NerD 60

Offline PandaSPUR

  • Posts: 157
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1858 on: Sat, 08 March 2014, 09:04:52 »
Noob with a question here.

So I just want a new case for my KBT Pure. Can I order just the acrylic 60% case for 70 bucks? And that price includes shipping?

Also, I was a bit confused by the OP. Will the acrylic sheets be bolted together with visible bolts or are they glued together?

Oh and I can just drop in the PCB as it is with switches and all right? No need to desolder and resolder?

Thankss
Home:
Das Keyboard - MX Browns - Vortex Grey Side-Printed PBT Caps
Work:
KBT Pure - iKBC Aluminum Case - MX Reds
Vortex Poker II - Frosty on Lime Acrylic Case - MX Clears

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.com
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1859 on: Sat, 08 March 2014, 09:08:44 »
Wow, I love how thick and solid that case looks! Well done Sprit :thumb:

Offline jorgenslee

  • Posts: 369
  • Location: Philippines
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1860 on: Sat, 08 March 2014, 09:50:56 »
Hi sprit,

That case looks awesome, now that is one more way to hack my wallet. But you have to know that the success of that case depends on the success  and result of the first round gb. I notice you are avoiding the status update of the shipping. You mention that shipping will be restarted this week  but it is weekend now and there is still no word about it, except for the case. Please let us know the ETA of the shipment and not just promises. As far as I know, the only thing that would delay the shipping is smd soldering and the springs but I think the spring issue has been settled last week. Does the pcb still on soldering processes? An update about this would highly be appreciated.

Thanks,
Jorge

Offline Melanic

  • Posts: 71
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1861 on: Sat, 08 March 2014, 19:10:55 »
Metal Case Sample Update   - Design 01 : Full Metal, more affordable, popular design.

More Pics are in the first page.

Apology for the delay!   These are Full Metal, More affordable Designs. Some details will be upgraded in the Final Version.   
100% Compatible with Acrylic Case,  Mix n Match ! 

Metal Feet and  H Bars for the F1-F12 will be prepared. 
Net Weight  :  60% Case   1.3KG (2.9 pounds) ,  87% Case  2.2KG (5 pounds)


That looks really thick. Could you post the dimensions of the case? Including the thickness of the sides around the keyboard. They look like a solid 1-1.5cm.

Offline CK Briefs

  • formerly calvins1
  • Posts: 545
  • Location: BC, Canada
So the orders are still up? I'm just a bit confused. Looked like the springs were already done; I just ordered springs and LEDs. Btw, are these 2x3x4 LEDs?
Current Keyboards: Orion - 62g ergo clears;
A87 PS2AVR - 59g ergo clears; QFR - stock blues

Offline Vintage

  • Posts: 456
  • Location: United States
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1863 on: Sun, 09 March 2014, 10:46:07 »
Metal Case Sample Update   - Design 01 : Full Metal, more affordable, popular design.

More Pics are in the first page.

Apology for the delay!   These are Full Metal, More affordable Designs. Some details will be upgraded in the Final Version.   
100% Compatible with Acrylic Case,  Mix n Match ! 

Metal Feet and  H Bars for the F1-F12 will be prepared. 
Net Weight  :  60% Case   1.3KG (2.9 pounds) ,  87% Case  2.2KG (5 pounds)




(Attachment Link)   (Attachment Link)  
(Attachment Link)   (Attachment Link)     (Attachment Link)     (Attachment Link)     (Attachment Link)
Wow those look sexy  :eek:
CM QFR w/ MX Reds  | Logitech G900


Offline Latin00032

  • * Destiny Supporter
  • Posts: 1528
Are these metal cases compatible with a hhkb layout, too?

Offline PandaSPUR

  • Posts: 157
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1865 on: Sun, 09 March 2014, 13:29:17 »
Noob with a question here.

So I just want a new case for my KBT Pure. Can I order just the acrylic 60% case for 70 bucks? And that price includes shipping?

Also, I was a bit confused by the OP. Will the acrylic sheets be bolted together with visible bolts or are they glued together?

Oh and I can just drop in the PCB as it is with switches and all right? No need to desolder and resolder?

Thankss

Could someone help me out? Or should I just PM sprit?

I'm currently thinking of getting a frosty/clear/frosty 60% case.
Home:
Das Keyboard - MX Browns - Vortex Grey Side-Printed PBT Caps
Work:
KBT Pure - iKBC Aluminum Case - MX Reds
Vortex Poker II - Frosty on Lime Acrylic Case - MX Clears

Offline cherpalla

  • Posts: 370
  • Location: Seattle, WA
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1866 on: Sun, 09 March 2014, 16:35:32 »
Noob with a question here.

So I just want a new case for my KBT Pure. Can I order just the acrylic 60% case for 70 bucks? And that price includes shipping?

Also, I was a bit confused by the OP. Will the acrylic sheets be bolted together with visible bolts or are they glued together?

Oh and I can just drop in the PCB as it is with switches and all right? No need to desolder and resolder?

Thankss

Could someone help me out? Or should I just PM sprit?

I'm currently thinking of getting a frosty/clear/frosty 60% case.

Shipping is not included. Shipping will run you ~$80.
c h e r

Offline PandaSPUR

  • Posts: 157
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1867 on: Sun, 09 March 2014, 17:07:05 »
Noob with a question here.

So I just want a new case for my KBT Pure. Can I order just the acrylic 60% case for 70 bucks? And that price includes shipping?

Also, I was a bit confused by the OP. Will the acrylic sheets be bolted together with visible bolts or are they glued together?

Oh and I can just drop in the PCB as it is with switches and all right? No need to desolder and resolder?

Thankss

Could someone help me out? Or should I just PM sprit?

I'm currently thinking of getting a frosty/clear/frosty 60% case.

Shipping is not included. Shipping will run you ~$80.

You mean case + shipping will cost ~$80 right? lol
Home:
Das Keyboard - MX Browns - Vortex Grey Side-Printed PBT Caps
Work:
KBT Pure - iKBC Aluminum Case - MX Reds
Vortex Poker II - Frosty on Lime Acrylic Case - MX Clears

Offline bubchi89

  • Posts: 39
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1868 on: Sun, 09 March 2014, 18:15:41 »
You mean case + shipping will cost ~$80 right? lol

Refer to this: http://geekhack.org/index.php?topic=50580.msg1194982#msg1194982

There were rumors about some proxying to reduce shipping costs, but not a lot of transparency. He did say explicitly that if the original invoice was inaccurate (e.g. if proxying happens and everyone's shipping is cheaper or EMS changes their pricing), he'd invoice again (or refund).

Offline lotus1109

  • Posts: 130
So…… Sprit you shipped already? :)
Nice metal case I would say, too bad I have insufficient cash: p

Offline PandaSPUR

  • Posts: 157
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1870 on: Sun, 09 March 2014, 20:55:30 »
You mean case + shipping will cost ~$80 right? lol

Refer to this: http://geekhack.org/index.php?topic=50580.msg1194982#msg1194982

There were rumors about some proxying to reduce shipping costs, but not a lot of transparency. He did say explicitly that if the original invoice was inaccurate (e.g. if proxying happens and everyone's shipping is cheaper or EMS changes their pricing), he'd invoice again (or refund).

Wow... that should probably be posted in the OP somewhere... unless I missed it.
Thanks for showing it to me lol. Guess I'll pass on this.
Home:
Das Keyboard - MX Browns - Vortex Grey Side-Printed PBT Caps
Work:
KBT Pure - iKBC Aluminum Case - MX Reds
Vortex Poker II - Frosty on Lime Acrylic Case - MX Clears

Offline shrapneL

  • Posts: 151
  • Location: Cincinnati, Ohio, USA
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1871 on: Mon, 10 March 2014, 17:50:45 »
Sprit, I pm'ed you about my order a week or so ago. Should I send you another?
hello.

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1872 on: Mon, 10 March 2014, 19:08:17 »
Sprit, I pm'ed you about my order a week or so ago. Should I send you another?

Hello!  shrapneL!  ;)   How's going there ?   It's still cold here, It snowed on weekend. 

Sorry for the delayed answer !   Too many PMs to reply   :)

I have read Your order again, and  I PMed You!   :)      Thanks !
« Last Edit: Mon, 10 March 2014, 19:53:20 by sprit »

Offline John Venture

  • Posts: 28
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1873 on: Mon, 10 March 2014, 20:22:14 »
Can you mix an ISO and ANSI layout on this PCB? EG if I wanted the ANSI return but the shorter shift and additional key would it be possible to do so on one board?

Also if I were to order a PCB now, how long would it take before it is shipped?

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1874 on: Mon, 10 March 2014, 20:27:53 »
Hi sprit,

That case looks awesome, now that is one more way to hack my wallet. But you have to know that the success of that case depends on the success  and result of the first round gb. I notice you are avoiding the status update of the shipping. You mention that shipping will be restarted this week  but it is weekend now and there is still no word about it, except for the case. Please let us know the ETA of the shipment and not just promises. As far as I know, the only thing that would delay the shipping is smd soldering and the springs but I think the spring issue has been settled last week. Does the pcb still on soldering processes? An update about this would highly be appreciated.

Thanks,
Jorge

Hello! Jorge!   ;) 
Thanks A Lot for your advice!   :thumb:    I am really grateful!
I will clear it up, and post it!   :) 

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1875 on: Mon, 10 March 2014, 20:32:35 »
Can you mix an ISO and ANSI layout on this PCB? EG if I wanted the ANSI return but the shorter shift and additional key would it be possible to do so on one board?

Also if I were to order a PCB now, how long would it take before it is shipped?

Basically You can mix ISO and ANSI,  You can mod Keymap as You like.  :)

I am doing restart shipping for the 1st Round at this moment,   ;)    so, if You order now, You need wait for the the MOQ.
« Last Edit: Mon, 10 March 2014, 20:40:21 by sprit »

Offline nubbinator

  • Dabbler Supreme
  • * Maker
  • Posts: 8658
  • Location: Orange County, CA
  • Model M "connoisseur"
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1876 on: Mon, 10 March 2014, 20:33:02 »
Is there any kind of timeline on this Sprit?  It seems like things keep getting added and changed and so on and it would be nice to know when to expect things to ship. I'm not rushing you, just curious about timing.

Offline John Venture

  • Posts: 28
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1877 on: Mon, 10 March 2014, 21:07:42 »

I am doing restart shipping for the 1st Round at this moment,   ;)    so, if You order now, You need wait for the the MOQ.

Cool, is there a link to the current status of orders? I don't care much for the color of the PCB as I intend to plate-mount.

Also could you post a picture of the 75% pcb please?


Offline xqz

  • Posts: 23
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1878 on: Tue, 11 March 2014, 10:26:12 »
Sprit do you mind checking your PMs from me =P I sent you two PMs regarding my order

Offline fatchoi

  • Posts: 218
  • Location: Hong Kong
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1879 on: Tue, 11 March 2014, 11:03:47 »
Sprit do you mind checking your PMs from me =P I sent you two PMs regarding my order

Same here. :D
Sprit, I've PM-ed you about adding 2 new springs to my 1st round order.
I can't stop adding thing now until things ship :P

Offline Grendel

  • Posts: 462
  • Location: OR, USA
    • Firmware for Costar Replacement Controllers
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1880 on: Tue, 11 March 2014, 11:23:57 »
I wish I would receive anything. Waiting since Nov....
Currently using: RK-9000WH/GR, CMS QFXT w/ Ghost Squid
- I'm game !

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1881 on: Wed, 12 March 2014, 01:56:23 »
1st  GB Status  Summarized. 


Hi  Guys!   Big Apology for the Delay!    :(    :) 


1st GB  :  1st Order and Paymaent closed  24th Dec.   -  Productions ...   Additional Parts Order and Payment for the Shipping closed  25th. Jan 



57163-0   


57288-1   57286-2 
« Last Edit: Sat, 19 July 2014, 06:27:39 by sprit »

Offline bubchi89

  • Posts: 39
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1882 on: Wed, 12 March 2014, 02:12:22 »
Thanks for the update sprit!

It looks like it'll be some time before you have my order ready to ship, which is fine. However, I'm moving (again) and need to change my address. I'll send it to you over PM but just pinging you in the thread to increase chances that you see it

Offline justnits

  • Posts: 663
  • Location: Malaysia
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1883 on: Wed, 12 March 2014, 02:14:40 »
1st  GB Status  Summarized. 


Hi  Guys!   Big Apology for the Delay!    :(    :) 


1st GB  :  1st Order and Paymaent closed  24th Dec.  Productions.   Additional Parts Order and Payment for the Shipping closed  25th. Jan 



(Attachment Link)

 :'(
reproduction will take how long?
| | | |
Ducky DK9008 Shine 2 Gateron Red w/ Korean 55g gold lubed spring & custom LED | Ergodox with Aluminium top plate | IBM Model M SSK | GHPad | GON's Nerd TKL | Filco Majestouch 2 TKL MX Blue
[Sold]Keycool 87 PBT White Cherry MX Blue | [Sold]ikbc F-104 Cherry MX Brown

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1884 on: Wed, 12 March 2014, 02:15:11 »
Thanks for the update sprit!

It looks like it'll be some time before you have my order ready to ship, which is fine. However, I'm moving (again) and need to change my address. I'll send it to you over PM but just pinging you in the thread to increase chances that you see it

Really Sorry and thanks,   bubchi !   :(

I will update Your New Address when I got it!    :)
« Last Edit: Wed, 12 March 2014, 02:28:57 by sprit »

Offline Zeal

  • Actually the King of Green Tea Kit-Kats
  • * Vendor
  • Posts: 2798
  • Location: BC, Canada
    • Zeal Generation Inc.
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1885 on: Wed, 12 March 2014, 02:34:21 »
Hi sprit,

Since there weren't a lot of metal plates made, what colour did you go with?
        "Bird have wing, bird will fly. Henry had wings.  Henry now fly." -Sent

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1886 on: Wed, 12 March 2014, 02:44:16 »
Hi sprit,

Since there weren't a lot of metal plates made, what colour did you go with?
Hi!  Zeal!  :) 

Most of them were Silvers and Gunmetals, few Reds, Lime.


I need to talk with people thru PM.
« Last Edit: Wed, 12 March 2014, 03:10:41 by sprit »

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1887 on: Wed, 12 March 2014, 02:46:05 »
Hello!  Justnits!  :)

I sent You PM!   ;)
« Last Edit: Wed, 12 March 2014, 04:31:28 by sprit »

Offline jufa

  • Posts: 127
  • Location: Indonesia
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1888 on: Wed, 12 March 2014, 03:26:35 »
hi sprit , please read my PM

Offline pasph

  • Posts: 1059
  • Location: Italy
Great update,  thanks Sprit
"There is more stupidity than hydrogen in the universe, and it has a longer shelf life"

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ...
« Reply #1890 on: Wed, 12 March 2014, 08:06:48 »
SPRiT Edition  :  60% Face W,  75% Mini W,  A.87 W,  110% W 
   
Latest  Firmware  v 1.2.3  May 5, 2016 (Tested by SPRiT)
 

DOWN  >  * Latest ps2avrGB4U_firmware_V1.2.3_160520(Tested by SPRiT).zip (54.09 kB - downloaded 371 times.)





A.   How to Update the Firmware and KeyMap?          

-  Basically The Latest Firmware and Keymaps are Installed and Tested Before shipping.   
Basic Key Map  : 60%  -   https://geekhack.org/index.php?topic=50580.msg1353538#msg1353538         
Unplug the USB cable,
Press Q for 5 seconds, and plug the USB cable  (all LEDs will flick.)   :o :o
-  Open   HIDBootFlash.exe
-  Press  'Find Device'  button
-  Press  'Open .hex File'  button  -   keymain_NKRO.hex  (N-Key Rollover) is the recommended firmware. 
-  Press  'Flash Device'  button    -  it takes 5-10 seconds.
-  Press  'Open .hex file'  button  -  Choose one of the 'keymap.hex'   (60% face,  or  a.87_V03 for A87,  MXmini,  A87UEX)

-  When the flashing is done, unplug the USB Cable, and then plug it again.  -   Hell' ~  My precious!    :-* 

-   https://geekhack.org/index.php?topic=58945.0   
   
57171-1 

57173-2 

57185-3



B.   How to Change the KeyMap?    (Custom Keymap)

Save and backup  Your current keymap. 
-  Load Keymapper  * - bootMapperClient_swf_140812.zip (894.57 kB - downloaded 543 times.)    or, go to   http://winkeyless.kr/bootMapper/   MacOS  https://www.dropbox.com/s/dy2gty3yx567ur8/bootMapperClient.zip?dl=0
-  Load Your Current or standard Keymap          (1)    ;)
-  Click & Edit the Keys!  with the Re-mapping key buttons.   (2)  ;)  
-  If You don't want to  'apply it to all layers',   Uncheck the box.       (3)    ;)   
-  Press  'save keymap_part.hex'   button  to save Your Custom keymap.    (4)   ;)   
Unplug the USB cable,  Press Q, and Load Your custom keymap to Your PCB. 
   (as you did before in the  'A. How to Update the Firmware and KeyMaps')
-  Congrat!    Happy Mapping!      >:D   

67205-5



C.   How to SW Macro?

-  Same as  above.   :o
Save and
backup  Your current keymap.  >:D 
-  Load keymapper  * - bootMapperClient_swf_140812.zip (894.57 kB - downloaded 543 times.)   or, go to   http://boot.winkeyless.kr/bootMapper ,  MacOS   :  https://www.dropbox.com/s/dy2gty3yx567ur8/bootMapperClient.zip?dl=0
-  Go to  >   Custom Macro  Tab  menu
-  Load Your Current or standard Keymap.       
-  Try it Yourself,  as we know, Macro is a pretty thing.    :-*
 


Mod Edit: Removed attached mp3.
« Last Edit: Thu, 14 July 2016, 20:50:32 by sprit »

Offline tjweir

  • * Exquisite Elder
  • Posts: 1039
  • Location: Toronto
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Assemble Service available)
« Reply #1891 on: Wed, 12 March 2014, 08:45:07 »
Awesome news Sprit!

I use Ps2AvrU for my Aikon boards now, and it works on my Mac flawlessly.

Offline bubchi89

  • Posts: 39
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1892 on: Wed, 12 March 2014, 11:22:36 »
Did anyone see which acrylic colors made MOQ? sprit mentioned in a PM that one of my colors didn't reach MOQ but I don't know which one failed to meet MOQ nor which colors made it through production (other than clear which he mentioned explicitly).

Offline Shinryuu

  • Posts: 49
  • Location: Finland
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1893 on: Wed, 12 March 2014, 15:44:15 »
Hey, is it possible to buy springs alone? :)
(ノ◕ヮ◕)ノ*:・゚✧

Offline BlueBär

  • Posts: 2231
  • Location: Germany, SB
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1894 on: Wed, 12 March 2014, 17:20:02 »
Hey, is it possible to buy springs alone? :)

Yes, that's what I did, just put zero in all other fields ;)

Offline bubchi89

  • Posts: 39
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1895 on: Wed, 12 March 2014, 22:21:53 »
Did anyone see which acrylic colors made MOQ? sprit mentioned in a PM that one of my colors didn't reach MOQ but I don't know which one failed to meet MOQ nor which colors made it through production (other than clear which he mentioned explicitly).

Just answering my own question since sprit PM'd me. I misread his PM--acrylic _cases_ mostly met MOQ so I got the white/black/white I ordered. The _plates_ are mostly clear though (because of MOQ and production issues?)

Offline fatchoi

  • Posts: 218
  • Location: Hong Kong
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1896 on: Thu, 13 March 2014, 02:03:49 »
The new firmware looks great! Looking forward to program my board for alternative layouts.

Offline sprit

  •  Post Editing Timeout
  • Thread Starter
  • Posts: 2425
  • Location: The Geek Symphosion :::::: Mechanical Engineering ::: Alta Magna Uniforma :::::: 哀吾生之須臾羨長江之無窮 ::
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1897 on: Thu, 13 March 2014, 02:44:32 »

It Rained yesterday, I took some Pics this morning.  ;)

57290-0   57292-1 
 
« Last Edit: Thu, 17 April 2014, 04:31:31 by sprit »

Offline justnits

  • Posts: 663
  • Location: Malaysia
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1898 on: Thu, 13 March 2014, 02:53:24 »



It Rained yesterday, I took some Pics this morning.  ;)


(Attachment Link)     (Attachment Link)

getting more n more excited! :D
are you shipping out soon?  :D
| | | |
Ducky DK9008 Shine 2 Gateron Red w/ Korean 55g gold lubed spring & custom LED | Ergodox with Aluminium top plate | IBM Model M SSK | GHPad | GON's Nerd TKL | Filco Majestouch 2 TKL MX Blue
[Sold]Keycool 87 PBT White Cherry MX Blue | [Sold]ikbc F-104 Cherry MX Brown

Offline infiniti

  • I <3 KB
  • * Senior Moderator
  • Posts: 2404
  • Location: Thrilla, Manila, Philippines
  • Bob was here
    • PM me and ask for a custom title!
Re: < SPRIT Model 1 > PCB + Case + Parts ... (Preparing to Ship)
« Reply #1899 on: Thu, 13 March 2014, 05:35:40 »

It Rained yesterday, I took some Pics this morning.  ;)


(Attachment Link)     (Attachment Link)

sprit, I think you've been very busy lately!  Please water your plant...they look kinda sad in those pictures :(