TEENSY 2.0 GROUP BUY ROUND 2

[jdcarpe]

Teensy 2.0 Group Buy Round 2

Orders closing soon. Invoicing to begin this weekend. ALL PAYMENTS DUE BY FEBRUARY 21, 2014.

*** IF YOU CANNOT PAY BY FEBRUARY 21, 2014, PLEASE DO NOT ORDER ***


Details
The Teensy USB Development Board is a complete USB-based microcontoller development system. Only a standard Mini-B USB cable is needed to connect to a PC or Macintosh. This version has solder pads for all I/O signals. Also included with each Teensy ordered is a set of 40 male header pins (not soldered to Teensy).



Pricing:
$14.00 per Teensy


Shipping:
Shipping will be in bubble mailers via USPS First Class Mail.

CONUS rates:
1-2: $2.50
3-4: $4.00
5+: $6.00

Int'l rates:
1-2: $10.00
3-4: $13.50
5+: $26 (Priority Mail)

Order Form
Please submit your order using the Google Docs form, >ORDERS CLOSED<

PM me for any order changes.


Order List
phoenix1234 paid
avtar paid
codyeatworld canceled
Pacifist paid
mooswa paid
AKmalamute paid
doub paid
PhineasRex paid
cafiend paid
tricheboars paid
DelKey paid
bunnylake paid
tony@hk canceled
jorgenslee paid
thegagne paid
hydrospell paid
Proc31 paid
Photoelectric paid
Rayne paid
nubbinator paid
shrapneL paid
JoshMK paid
n7 paid
domesticbark paid
vasipher paid
MythicalWagyu paid
intelli78 paid
LechnerDE paid
CPTBadAss paid
ZeDestructor paid
mark0331 paid
OldDataHands paid
r3dx paid
ryan7107 paid
n0rvig paid
riotonthebay paid
mkawa paid
damorgue paid
tgujay paid
poog paid
stoic-lemon paid
apotheosis paid
jeb paid
remdell paid
thecableguy paid

Total number ordered: 149
Payments received: 60/61



Additional Teensy models available (International orders only, must purchase at least one Teensy 2.0 to add any of the following):
Teensy++ 2.0 - $24.00
Teeny 3.0 - $19.00
Teensy 3.1 - $19.80

If you are placing an international order, and would like me to proxy one of these other Teensy models for you, please state this in the comments section of the order form.

[jdcarpe]

To let you know what you are getting for your $14, the Teensy 2.0 with pins sells for $19 plus shipping from PJRC.com. Their base shipping cost is $3.50 or so. The only difference here is that you have to solder on the header pins to the Teensy. Which is very easy to do. So, by soldering your own pins, and ordering in bulk, you will save at least $6 for one piece. Consider each additional unit you order as an additional $5 saved.

[jdcarpe]

Some projects that require a Teensy:

Soarer's XT/AT/PS2/Terminal to USB Converter with NKRO

Soarer's WYSE Converter firmware

PJE's OneHand - 20% Keyboard - Teensy 2.0 only

Phantom - Teensy 2.0 only

ErgoDox - Teensy 2.0 only

Kishsaver Converter Project

[metalliqaz]

Awww... I just ordered!  D'oh!

[Pacifist]

sign me up for 1 now and maybe another later

edit: filled out form for 2 

[codyeatworld]

Awesome, I'll need one of these for my kishsaver!

I just ordered!

[avtar]

[mooswa]

In for 2. 
The form still says Sept 2013, btw.

[jdcarpe]

In for 2. 
The form still says Sept 2013, btw.

Heh, will fix that. Reused the original form.

[n0rvig]

Yes please

[Dubsgalore]

Show Image

LOL awesome gif

good luck with this JD :)

[AKmalamute]

If the timing of my finances and this GB work together, I'll order 1, maybe two more.
In for one, as of right now.

[Pacifist]

How hard is it to solder these together? Is it like SMD work or like soldering switches?

[jdcarpe]

How hard is it to solder these together? Is it like SMD work or like soldering switches?

Just like soldering switches. Nothing much to it, really.

[CalmB4tehPwn]

I'll pass on this one. Still got a Teensy left over from the last buy, and it'll be awhile before it gets used.

Glad to see more are getting circulated, though!

Keep up the good work, JD

[TheHydroMule]

I've been looking around online and it seems that the ErgoDox only works with teensy 2.0 and not 3.0/3.1, correct? If this is true and I can only use 2.0 I'll be in for one or two, have to confirm with a friend if he wants one.

[xmagusx]

Just so there is an apples to apples comparison, pjrc does sell the Teensy 2.0 without headers for $16. CONUS shipping for one is ~$3, going up to ~$3.5 for eight. So while you definitely do save with this, the savings are not quite as pronounced as the original post indicates.

$20.60 for one from pjrc; $16.50 from this group buy
$145 for eight from pjrc; $118 for eight from this group buy

Definite thanks to jdcarpe for organizing this, though!

Edit: Missed the headers, updating comparison. This (with headers) is still cheaper than buying from pjrc without headers, by the way.

[AKmalamute]

xmagusx: Yes looked at those numbers. It's a coupla bucks saved, and as (Jefferson? Edison?) said, a penny saved is ... (also you're getting the header pins which are also a couple bucks, so I think it works out to $3 saved if you get just one)

HydroMule: that PCB expressly expects by its pinouts to be given the 2.0 in particular, yes. Same with the phantom.

[TheHydroMule]

Just so there is an apples to apples comparison, pjrc does sell the Teensy 2.0 without headers for $16. CONUS shipping for one is ~$3, going up to ~$3.5 for eight. So while you definitely do save with this, the savings are not quite as pronounced as the original post indicates.

$19 for one from pjrc; $16.50 from this group buy
$131.50 for eight from pjrc; $118 for eight from this group buy

Definite thanks to jdcarpe for organizing this, though!

looked at that site and it seems that international orders (Canada) doesn't really make a difference and saves like 50 cents going through pjrc but I don't know if header pins are included. and going with adafruit theirs is $20 and $9.50 shipping I think.  So this ends up being a little cheaper.

HydroMule: that PCB expressly expects by its pinouts to be given the 2.0 in particular, yes. Same with the phantom.

alright thanks!

[jdcarpe]

Just so there is an apples to apples comparison, pjrc does sell the Teensy 2.0 without headers for $16. CONUS shipping for one is ~$3, going up to ~$3.5 for eight. So while you definitely do save with this, the savings are not quite as pronounced as the original post indicates.

$19 for one from pjrc; $16.50 from this group buy
$131.50 for eight from pjrc; $118 for eight from this group buy

Definite thanks to jdcarpe for organizing this, though!

You get a 40-pin set of header pins by ordering from me, so let's do the math, shall we?

From PJRC:

2    HEADER_20x1   Pins (header), 20 pins, 0.1 inch (2.54 mm) spacing    0.80   1.60
1   TEENSY   Teensy USB Board    16.00   16.00
Subtotal:    17.60
US Mail: 3.03
Total: 20.63

From this GB:
1 Teensy 2.0 w/40-pin header: 14.00 14.00
US Mail: 2.50
Total: 16.50

20.63-16.50= $4.13 saved, and I said $6. Oops. Anything else you want to point out??

[Hellmark]

Hmm, may want to order a couple more. Will have to see how funds are.

[Ian S]

For those who can't easily buy it, had you considered offering the chip on the other ErgoDox PCB with each Teensey?

[Puddsy]

Will payment be in Jan. or Feb.?

I could use 1 or 2 of these, I just need to know when I have to pay.

[tricheboars]

perfect.  i just bought some ergodox pcbs on mass drop for no reason and was worried about sourcing the rest of the kits. 


one thing down!

thanks for doing this.

[yasuo]

$24.00 International orders included shipping?
EDIT:yeah,include shipp,apparently

[jdcarpe]

OP updated to reflect current numbers. Payments will most likely be due some time in February.

Both domestic and international shipping costs are listed separately from the Teensy prices in the OP.

[hydrospell]

Placed order for 2 in the form. What sort of shipping is $10 for intl? (Tracking available?)

[jdcarpe]

Placed order for 2 in the form. What sort of shipping is $10 for intl? (Tracking available?)

Thank you! $10 Int'l shipping is First Class USPS in a bubble mailer, with a Customs number for tracking.

[hydrospell]

Cool thanks!

Just dropping a note that when it's time to pay and you don't hear from me please PM, that is linked to my email so I will definitely get notified and pay the ____ up.

Thanks!

[tgujay]

I'll take two, thanks.

[LechnerDE]

Just posting here to not forgot about that thread.

Will probably order two Teensy 2.0s when the deadline approaches

[jdcarpe]

If this doesn't get more orders soon, I'm probably going to cancel the buy. Unless everyone is okay with paying $15.60 each for their Teensys. That's the best price I can do if we don't hit 100 units.

That still saves you $2 per unit versus ordering at retail for the Teensy ($16) and header pins ($1.60), at $17.60.

[LechnerDE]

We are 68 Teensys short right? So my 2 won't make a difference I guess

[AKmalamute]

Give it a while longer to percolate. I can ask around at work, maybe I can proxy for another three or four here at my office. Or maybe not but I'll update you if so ;-)

[tricheboars]

I am so sorry but please cancel my order. Massdrop ****ed up my ergo dox pcb order... Jerks!

[AKmalamute]

I am so sorry but please cancel my order. Massdrop ****ed up my ergo dox pcb order... Jerks!

Mechanical Keyboards (.com) ?

Also, JD: PM incoming about a modification to my order

[avtar]

That's too bad. I was wondering when I would see an invoice come in for this. I would only need two but it's not like that will make a huge difference :/

If this doesn't get more orders soon, I'm probably going to cancel the buy. Unless everyone is okay with paying $15.60 each for their Teensys. That's the best price I can do if we don't hit 100 units.

That still saves you $2 per unit versus ordering at retail for the Teensy ($16) and header pins ($1.60), at $17.60.

[jdcarpe]

OP updated to reflect current numbers.

We are halfway there! Everyone double their order, and we can proceed right away!!

HURRY, ORDER MORE BEFORE IT'S TOO LATE!!!

[Hellmark]

For me, it all depends on when I can get money. I have several good sized chunks of money coming in, just waiting to see when I can actually get it.

[codyeatworld]

I might get another one, I've been itching to hand wire a custom layout...

[WhaleHunterNate]

Nice, just ordered 2 of em, one for a brownfox type build, and another for if I fry the first one.

[Photoelectric]

In for one!

[Rayne]

in for 2! might have some projects to work on soon.

[nubbinator]

Put my order in so I can mod my IBM keyboard from serial to USB or PS/2...but I feel so dirty doing so.

[Photoelectric]

Put my order in so I can mod my IBM keyboard from serial to USB or PS/2...but I feel so dirty doing so.

That's what mine will be for too

[Proc31]

What kind of discount could we get if the order was just for 50 rather than the 100 because it isn't looking like we are going to make it.

[jdcarpe]

What kind of discount could we get if the order was just for 50 rather than the 100 because it isn't looking like we are going to make it.

Price breaks are at 25 and 100 units only. At 25-99 units, I would have to add $1.60 to each Teensy ordered, making them $15.60/ea. I know that doesn't sound different than the $16.00 they cost at retail, but if you add the cost of header pins from PJRC ($0.80/ea x 2=$1.60), you actually save $2.00.

I was hoping we would make 100 units ordered, because I really need Teensys, but I can't afford to buy us up to 100 on my own.

[SpAmRaY]

What kind of discount could we get if the order was just for 50 rather than the 100 because it isn't looking like we are going to make it.

Price breaks are at 25 and 100 units only. At 25-99 units, I would have to add $1.60 to each Teensy ordered, making them $15.60/ea. I know that doesn't sound different than the $16.00 they cost at retail, but if you add the cost of header pins from PJRC ($0.80/ea x 2=$1.60), you actually save $2.00.

I was hoping we would make 100 units ordered, because I really need Teensys, but I can't afford to buy us up to 100 on my own.

How many do you need JD?

[jdcarpe]

How many do you need JD?

Me personally? Or to make up the difference to 100?

[damorgue]

I might need a few but when I ordered from the previous teensy GB it turned out to be more expensive than when I ordered from PJRC directly, simply because he charges about half for international shipping. I have to order 4 to make up for it and for me to save anything by entering into this GB. It doesn't make much sense for international orders I am afraid.

[SpAmRaY]

How many do you need JD?

Me personally? Or to make up the difference to 100?

Sorry I should have asked if the 50 in the OP was current.

[jdcarpe]

How many do you need JD?

Me personally? Or to make up the difference to 100?

Sorry I should have asked if the 50 in the OP was current.

Yes, it's right around there. I've had a couple new orders, and a couple back out.

[shrapneL]

Sent in an order for 2! Hopefully we can get somewhere near 100

[JoshMK]

Put in an order, jdcarpe. 

[jdcarpe]

MechanicalKeyboards, always coming through for our group buys!

With my order, that puts us over 100, everyone. I will start invoicing this weekend, and you will have until February 21 to get all payments in. The sooner the better though, so that I can order the Teensys from PJRC once I receive all payments.

THANK YOU, EVERYONE!!


P.S. If you were waiting to put in a last minute order, you had better do it quickly!

[Pacifist]

MechanicalKeyboards, always coming through for our group buys!

With my order, that puts us over 100, everyone. I will start invoicing this weekend, and you will have until February 21 to get all payments in. The sooner the better though, so that I can order the Teensys from PJRC once I receive all payments.

THANK YOU, EVERYONE!!


P.S. If you were waiting to put in a last minute order, you had better do it quickly!

sweet. Can't wait

[n7]

I ordered two... this is too good a deal to pass up. Thanks for the buy

[Proc31]

I was getting worried this buy wouldn't make it. Thanks to MechanicalKeyboards for making up the 100 but more importantly to jdcarpe for running this.

[jdcarpe]

Unless there are any objections, Muirium at Deskthority has offered to proxy shipping for all European orders. That should save a few of you a fair bit of money. If you have an order shipping to Europe and don't want to be in the proxy shipping group, please let me know now, so that I can invoice you for the full shipping cost.

[shrapneL]

Just paid 0115. Thanks for organizing jd. 

[Pacifist]

paid 0100 for two teensies

[n7]

Paid 0116. Thanks again for the buy!

[Photoelectric]

Paid--thanks, JD!

[phoenix1234]

Paid Inv 0097.
Thank you for arranging this group buy.

[MythicalWagyu]

Hey JD, this GB caught my eye but wasn't sure if you were still taking orders or not - if are you I sent one your way, will pay as soon as I see an invoice - if not, no worries!
Happy to scoop up someone else's order if you have/had anyone cancel

[hydrospell]

I have not yet received an invoice. Could you PM me? That will be forwarded to my email address. Thanks for organising! 

[tricheboars]

lol. the project i was going to use this for ended up being cancelled in lieu of massdrop. i even asked to cancel my order on this but i paid the invoice anyway and now figure it cant hurt to just have another teensy around. thanks.

so dont cancel my order cause i paid. thanks for this jd.

[jdcarpe]

lol. the project i was going to use this for ended up being cancelled in lieu of massdrop. i even asked to cancel my order on this but i paid the invoice anyway and now figure it cant hurt to just have another teensy around. thanks.

so dont cancel my order cause i paid. thanks for this jd.

Oops, sorry about that. I must have missed your name when I was processing a few cancellations. But you're right, it never hurts to have a spare Teensy around.

[Pacifist]

Can't wait to get mine. I tried flashing hex onto my pro micro but it never worked

[mooswa]

paid

[intelli78]

Ordered, thanks for organizing this.

[JoshMK]

Paid. Thanks jdcarpe 

[jdcarpe]

Thanks for the quick payments, so far!

FYI, I will be marking these as "shipped" with Paypal, but obviously I don't even have the Teensys in hand yet. Once I receive all payments, I will order the Teensys from PJRC. When I receive them, I will begin shipping them out, and I will update the OP with a tracking number next to your name.

If you haven't paid yet, you are not in trouble. The payment deadline is still February 21st. But if I happen to receive all payments before then, I will place the order sooner.

[CPTBadAss]

Oh crap...I completely forgot to submit an order .

[LechnerDE]

Oh crap...I completely forgot to submit an order .

You can still do it - I just placed mine a couple of hours ago

[jdcarpe]

Oh crap...I completely forgot to submit an order .

I may leave the order form open until I receive all payments, or February 21st, whichever comes first. Payment deadline is still a hard cutoff date!

[CPTBadAss]

Oh crap...I completely forgot to submit an order .

You can still do it - I just placed mine a couple of hours ago

Hooray! A happy ending for LechnerDE and I . Thanks for letting me know.

[intelli78]

Paid, thanks

[LechnerDE]

Oh crap...I completely forgot to submit an order .

You can still do it - I just placed mine a couple of hours ago

Hooray! A happy ending for LechnerDE and I . Thanks for letting me know.

Yes indeed!

Just paid my invoice and simultaneously ordered 2 Phantom PCBs from mechanicalkeyboards.com

Now I only need steel plates that support opening switches without desoldering to build my first keyboard!

Hopefully WFD returns and offers them again

[jdcarpe]

Even if he doesn't, I'm going to be working toward getting some designs to a couple people who are interested in making them available in group buys

[LechnerDE]

Even if he doesn't, I'm going to be working toward getting some designs to a couple people who are interested in making them available in group buys

That would be awesome!

[jdcarpe]

If anyone who is planning on making a Kishsaver converter using a Teensy++ 2.0 would like to order or add one or more to their order, even domestic orders, please do so now. If you already have an existing order, you can PM me to add it to your order.

[mark0331]

Invoice paid, thanks much

[Honq]

Sorry, I couldn't exactly find the "required post #" rule.

Am I eligible for this at the current "post" state I am at?

Edit: or am I too late anyways? just confused at how this all works

[shrapneL]

Sorry, I couldn't exactly find the "required post #" rule.

Am I eligible for this at the current "post" state I am at?

Edit: or am I too late anyways? just confused at how this all works

I believe it is just classifieds that has the required post count. I'm not sure if JD closed orders or not yet, but with his last post on here he mentioned that he might leave orders open until he received all the payments or Feb. 21 rolls around.

[jdcarpe]

Sorry, I couldn't exactly find the "required post #" rule.

Am I eligible for this at the current "post" state I am at?

Edit: or am I too late anyways? just confused at how this all works

As long as you can pay right away, I left the order form open. I've been trying to stay on top of sending invoices out to people placing new orders, so that they don't have to wait to make their payment.

[riotonthebay]

Last minute order in  I'll pay as soon as I'm invoiced.

[mkawa]

last minute order

[tgujay]

Can I get added then?  I posted in like the second first page saying I wanted two and never got added to the list >_>

[jdcarpe]

Can I get added then?  I posted in like the second page saying I wanted two and never got added to the list >_>

Oh, didn't notice that, sorry. Order form is still up...link also in OP.

[tgujay]

Can I get added then?  I posted in like the second page saying I wanted two and never got added to the list >_>

Oh, didn't notice that, sorry. Order form is still up...link also in OP.

Got it, thanks!  Also invoice paid.

[AKmalamute]

time enough? Another coworker wants one. PM incoming.

Edit: Thanks! Paid!

[stoic-lemon]

Form filled

[jdcarpe]

Last day! If you want to place a late order, get it in and paid quickly!

I'll be canceling any unpaid orders after today.

[remdell]

I filled the form for two.  I can't wait to try out Soarer's Converter on my XT boards. 

Edit: Invoice was sent quickly, and I paid

[thecableguy]

Too late to place my order...  Anyways, many thanks to Jdcarpe for organizing this group buy.   

[thecableguy]

Payment sent.  Thank you Jdcarpe.   

[Pacifist]

Any ETA? Its been a week

[tgujay]

Any ETA? Its been a week

Are you about ready to cancel?

[jdcarpe]

Any ETA? Its been a week

The Teensys are en route to me, and will arrive Monday evening. I'll be honest, I won't have much time before next weekend to get things packed up and sent. I'll try, but I make no promises.

[Pacifist]

Any ETA? Its been a week

The Teensys are en route to me, and will arrive Monday evening. I'll be honest, I won't have much time before next weekend to get things packed up and sent. I'll try, but I make no promises.

Sounds good. I'm still cleaning my F XT so I'm not in a hurry

[Photoelectric]

No rush for me either, JD!  You can drop mine off last.

[mkawa]

i am not in any hurry

[jdcarpe]

It's no real problem. Packing and shipping only takes a couple hours, really. It's just a matter of finding those couple hours during the week that becomes a challenge. That's why I tend to do most of my packing for GBs on weekends.

[damorgue]

Anyone know of a cheap way to power a teensy without a computer? I seem to be using them everywhere in more or less permanent installations.

I have been using power plugs meant for charging USB devices and a USB cable until now. It is basically a wall plug with a USB connector on it (pretty much a small sized 230VAC-5VDC transformer I guess). I think we need a list of sources for the cheapest power plug USB chargers.

[mkawa]

take any 5v power rail, hook the ground up to ground on a USB mini connector, and the 5V to the 5V pin and the teensy will power up when you plug in the mini USB. the teensy only asks for 500ma, so as long as your power supply can give it that, you're good. in the US, the cheapest reliable USB wall warts are probably monoprice's. otherwise, i'd say buy like 5 off of ebay from an HK seller with high feedback, test them all and just toss the ones that don't work.

[jdcarpe]

QUICK UPDATE:

Teensys arrived Monday, as scheduled. All European orders going via proxy (Muirium) have been shipped as of today. Also shipped the large order to Josh@MechanicalKeyboards today. Will work on getting the rest packed and labeled this weekend, to go out in Monday's mail.

[Pacifist]

QUICK UPDATE:

Teensys arrived Monday, as scheduled. All European orders going via proxy (Muirium) have been shipped as of today. Also shipped the large order to Josh@MechanicalKeyboards today. Will work on getting the rest packed and labeled this weekend, to go out in Monday's mail.

YAY!!!

[n0rvig]

w00t! thanks for the update

[hydrospell]

curious - how many of the teensys are going to (southeast) asia?

[stoic-lemon]

I don't think SE Asia covers me, but I'm getting some.

[JoshMK]

Also shipped the large order to Josh@MechanicalKeyboards today.

Got them in today. Thanks JD! 

[Pacifist]

Can't wait

[jdcarpe]

I forgot to tell you guys.

THESE ARE 100% SHIPPED.

I shipped out all CONUS orders on Monday the 10th, and I shipped all non-proxy international orders yesterday. Some people should be getting these very soon!

[Photoelectric]

Just received my Teensy--thank you JD!!  It really is tiny: I was surprised just how small it actually is

[Pacifist]

I forgot to tell you guys.

THESE ARE 100% SHIPPED.

I shipped out all CONUS orders on Monday the 10th, and I shipped all non-proxy international orders yesterday. Some people should be getting these very soon!

Ooooh can't wait

[tgujay]

Came home to a surprise in the mailbox... my two Teensy 2.0's!  Thanks JD!

[r3dx]

Received mine today as well! Thanks JD! 

[thecableguy]

Mine arrived today, too.  Thank you, JD!

[Pacifist]

I forgot to tell you guys.

THESE ARE 100% SHIPPED.

I shipped out all CONUS orders on Monday the 10th, and I shipped all non-proxy international orders yesterday. Some people should be getting these very soon!

Ooooh can't wait

Got em!

[remdell]

I got my pair today.  However, it will be quite some time before I use it.  Hopefully, after my midterms are over with, I can get some soldering equipment to tinker with the Teensy.

[AKmalamute]

it will be quite some time before I use it.

I, however, have already melted one of mine.

Fortunately that surface mount thing that's next to the mid-pin the ergodox relies on is either a resistor, or I got incredibly lucky reattaching it in the correct direction. I've since that heart stopping moment, programmed the teensy repeatedly and it seems to work as I'd expect.

Hopefully my coworkers will have better luck with this thing on their projects. Or at least not worse.

[tgujay]

it will be quite some time before I use it.

I, however, have already melted one of mine.

Fortunately that surface mount thing that's next to the mid-pin the ergodox relies on is either a resistor, or I got incredibly lucky reattaching it in the correct direction. I've since that heart stopping moment, programmed the teensy repeatedly and it seems to work as I'd expect.

Hopefully my coworkers will have better luck with this thing on their projects. Or at least not worse.

Yeah, despite my best efforts I'm starting to think I'm not cut out for soldering haha.  Getting the pins on my Teensy was a pain in the ass.

[n7]

Got mine yesterday. Have some ideas for some projects I want to use it for, but nothing concrete yet. Thanks again for organizing the buy!

[shrapneL]

I got mine yesterday! Thanks JD

[tricheboars]

i got mine yesterday. when i saw who it was from i got super excited. it is funny this group buy. i bought into uh.. 5 group buys before this one and i got yours before all of the others. really appreciate it.

maybe i will make an orb weaver like thingy since my nostromo is ****ing membrane. yuk.

i dislike the censor on this site for the record.

[PhineasRex]

I just got my Teensies. Thanks, JdCarpe!

[tgujay]

i got mine yesterday. when i saw who it was from i got super excited. it is funny this group buy. i bought into uh.. 5 group buys before this one and i got yours before all of the others. really appreciate it.

maybe i will make an orb weaver like thingy since my nostromo is ****ing membrane. yuk.

i dislike the censor on this site for the record.

That's an individual profile setting...

[CPTBadAss]

Just wanted to say I got my Teensys when I returned. As always, you run a hell of a GB jdcarpe. Thanks again

[nubbinator]

Got mine yesterday.  It really is teensy.

[Proc31]

Got mine yesterday, thanks everyone!

[doub]

I got mine today. Thanks for the group buy and the proxying.

[LechnerDE]

Got my 2 Teensies today

Thanks for organizing the group buy JD!

[MythicalWagyu]

Forgot to mention mine showed up over the weekend - thanks for arranging the group buy JD! I shall now go meticulously study Lowpoly's amazin Apple M0110 mod in hopes of eventually refurbing my board

[stoic-lemon]

Mine arrived safe and sound today. Thanks JD.

[hydrospell]

Hey jd, I know Singapore's probably going to take long to ship to but would like to confirm that my order is on its way. thanks!

[jdcarpe]

Hey jd, I know Singapore's probably going to take long to ship to but would like to confirm that my order is on its way. thanks!

It says "Customs Clearance Process Complete - Singapore" on USPS tracking. I'll send you a PM with the tracking number.

[stoic-lemon]

Hey jd, I know Singapore's probably going to take long to ship to but would like to confirm that my order is on its way. thanks!

Not to worry. yours can't be far behind mine.

[n0rvig]

Happy happy. Thanks JD.

[hydrospell]

Thanks jd and lemon

[jdcarpe]

jorgenslee, I just got a tracking update for your package, and they just processed though customs in Chicago! They were sent on the same day as the other 8 international packages I sent, so I don't know if USPS lost them in their system for 2 weeks or what. But know that your Teensys are on their way, and I apologize on behalf of USPS for them taking so long to get there.

[jorgenslee]

Cool, no worries jdcarpe. It is so nice of you to update us the statuses of the tracking. I am in no hurry so that is fine. Thanks for this GB.

[hydrospell]

Mr Carpexxxxxxxx the teensy has arrived here in Singapore. Thanks again!

[ZeDestructor]

Arrived in Australia a few days ago. Thanks for the effort!

[phoenix1234]

Received mine today, everything is perfect, thanks JD.

[jorgenslee]

Got the 2 teensy's today. Thanks jdcarpe.

[Zentaaa]

If anyone has a spare, I am in need of one Thanks

[feizor]

Yep I need one too for the phantom.

[Zentaaa]

Yep I need one too for the phantom.

Okay just found out that MechanicalKeyboards.com just got a restock so head over to here for one man!

http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=568

[feizor]

Awesome, thanks for the heads up!

[Zentaaa]

Awesome, thanks for the heads up!

Its okay