Realforce issue

[tribade]

Hi all,
I got a realforce 87uw 55g board, and a digil0g aluminum case to put it in.  Everything was smooth sailing until i tried to get the ground off of the metal pcb.  Does anyone know whether Realforce puts locktight on the ground screw or something because I have had no luck whatsoever in getting it to budge, and I've been trying for a while now.  Has anyone else had this problem?

Here's an image I stole from ripster of the area: .  It's a phillips head screw that connects a ground to the PCB from the usb cable.

[khaangaaroo]

There's no locktight glue, but there might be a lock washer keeping it on there tighter than normal. Just get a good grip on a screwdriver that fits into the screw head well, and turn hard.

[exitfire401]

Weird, mine came off with no issues. I remember it took some good force to get it off, but it still came right off.

[AKIMbO]

I had trouble removing mine too.  I ended up using a very sharp micro-screw driver (flat head) to remove the screw.  It took quite a bit of downward pressure on the screw with the screwdriver, but it worked. 

[aref]

I had to use a micro tool set with an oversize handle to generate sufficient torque and, as AKIMbO said, downward pressure.

[tribade]

Thanks for all the replies guys. I'll give it another shot when I get home from work later tonight. I think it must be a lock washer or something similar.

[dorkvader]

I had to use a micro tool set with an oversize handle to generate sufficient torque and, as AKIMbO said, downward pressure.

Downward pressure is key to prevent cam out of the Phillips bit. I recommend replacing it with hex or torx.

[Wildcard]

Thanks for all the replies guys. I'll give it another shot when I get home from work later tonight. I think it must be a lock washer or something similar.

Use the force

[khaangaaroo]

I second what AKIMbO said about using a flat head driver. I remember having an easier time getting it off with a flat head than a philips. Not as much downward force required to prevent it from popping out.

[AKIMbO]

Thanks for all the replies guys. I'll give it another shot when I get home from work later tonight. I think it must be a lock washer or something similar.

Use the torx

FTFY

[tribade]

Thanks for all the replies guys. I'll give it another shot when I get home from work later tonight. I think it must be a lock washer or something similar.

Use the torx

FTFY

Got it to work, thanks guys!  Turns out I really did just need more force.  I'm used to fixing fencing equipment with jewelers screwdrivers so I thought that I could get enough torque on it with those, but I needed that fullsize handle.  Fortunately we had a phillips head screwdriver that fit perfectly.  After a battle that took days, I had it out and put into its new case in seconds.

Thanks again for your help!

[dustinhxc]

I've opened my silent model and my all 55g up multiple times and that screw came right out. Glad you got it!

[BucklingSpring]

Sh0w us s0me digil0g pr0n 0nce d0ne!