Author Topic: My DIY Caps  (Read 165643 times)

0 Members and 2 Guests are viewing this topic.

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1150 on: Thu, 01 February 2018, 18:33:58 »
Tryin to see if putting in a visor works....

Midas Cats  :p
Show Image


Code: [Select]
Midas Cats

Dope!
Cheers!

When the CopyCat sale though?
Maybe this month. Will depend on how my resin cooperates with me  :-\
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1151 on: Sat, 03 February 2018, 01:35:19 »
Trying to bring this guy to life again  :rolleyes:

TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline mogo

  • Posts: 582
  • handshoes and horse grenades
Re: My DIY Caps
« Reply #1152 on: Sun, 04 February 2018, 11:05:49 »
It's a lovely cast! :D

Offline suicidal_orange

  • * Global Moderator
  • Posts: 3155
  • Location: England
Re: My DIY Caps
« Reply #1153 on: Mon, 05 February 2018, 05:40:10 »
And why not - it's a solid design and looks like you've got the double shot parts perfect :thumb:
                               
Ducky Zero, MX Reds    JD40, Jailhouse Blues           GH60
Soarer controller

Offline TonyD

  • Posts: 20
  • Location: Newcastle, UK
    • dtronixs
Re: My DIY Caps
« Reply #1154 on: Wed, 07 February 2018, 04:51:41 »
+1 great looking caps

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1155 on: Wed, 07 February 2018, 19:46:46 »
+1 great looking caps

It's a lovely cast! :D

And why not - it's a solid design and looks like you've got the double shot parts perfect :thumb:

Thanks!
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1156 on: Wed, 07 February 2018, 19:48:26 »
Mr Cupido

TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Online DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • Posts: 972
  • Location: Charleston, SC
  • Haha just kidding
Re: My DIY Caps
« Reply #1157 on: Sat, 10 February 2018, 14:08:57 »
Mr Cupido

Show Image


My inner weeb NEEDS one (or more) of these

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1158 on: Sat, 24 February 2018, 06:41:48 »
Bringing back the old designs...







TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Online UsualSuspectXXX

  • Posts: 3431
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: My DIY Caps
« Reply #1159 on: Sat, 24 February 2018, 22:00:50 »
Bringing back the old designs...

Show Image


Love seeing the JS2.0 make a comeback, especially this green colorway.

Any chance of rebooting the JS1.0?

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1160 on: Sun, 25 February 2018, 01:17:31 »
Bringing back the old designs...

Show Image


Love seeing the JS2.0 make a comeback, especially this green colorway.

Any chance of rebooting the JS1.0?

Sir, yes sir!
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Online UsualSuspectXXX

  • Posts: 3431
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: My DIY Caps
« Reply #1161 on: Sun, 25 February 2018, 09:46:40 »
Bringing back the old designs...

Show Image


Love seeing the JS2.0 make a comeback, especially this green colorway.

Any chance of rebooting the JS1.0?

Sir, yes sir!
Show Image


Yes!

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1162 on: Sun, 25 February 2018, 11:52:01 »
Some moar...



TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1163 on: Fri, 16 March 2018, 04:34:21 »
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline suicidal_orange

  • * Global Moderator
  • Posts: 3155
  • Location: England
Re: My DIY Caps
« Reply #1164 on: Fri, 16 March 2018, 05:15:00 »
This thread always makes me laugh - 'DIY Caps', but when you open it you find another 5 shot masterpiece!
                               
Ducky Zero, MX Reds    JD40, Jailhouse Blues           GH60
Soarer controller

Offline mogo

  • Posts: 582
  • handshoes and horse grenades
Re: My DIY Caps
« Reply #1165 on: Fri, 16 March 2018, 09:37:36 »
This thread always makes me laugh - 'DIY Caps', but when you open it you find another 5 shot masterpiece!

True! Maybe it's time to change the thread title to something more descriptive, like "Krytone's Krap Karnival"  :))... wait, on second thought, maybe that much alliteration is a bad idea...  :-X

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1166 on: Fri, 16 March 2018, 22:16:27 »
This thread always makes me laugh - 'DIY Caps', but when you open it you find another 5 shot masterpiece!

True! Maybe it's time to change the thread title to something more descriptive, like "Krytone's Krap Karnival"  :))... wait, on second thought, maybe that much alliteration is a bad idea...  :-X

omg that is so wrong in so many ways that i wanna do it  :))
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1167 on: Fri, 16 March 2018, 22:26:42 »
Some moar skulls...

TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline kgolden

  • Posts: 94
Re: My DIY Caps
« Reply #1168 on: Sat, 17 March 2018, 16:52:12 »
Those skulls are pretty sick.. nice work

Offline Vloshko

  • Posts: 145
  • Location: Cali, Colorado, & Israel
Re: My DIY Caps
« Reply #1169 on: Sat, 17 March 2018, 22:30:12 »
I'm diggin those skulls too. I'm quite fond of the illuminated maker logo/signature on the back.
Visit the Typing Test and try!

Online UsualSuspectXXX

  • Posts: 3431
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: My DIY Caps
« Reply #1170 on: Sat, 17 March 2018, 22:34:21 »
Some moar skulls...

Show Image


Oh damn. Crowned Skulls getting a nice reboot!

Offline gr4v3m4n

  • Posts: 104
  • Location: kaps land
    • my store
Re: My DIY Caps
« Reply #1171 on: Mon, 26 March 2018, 17:00:47 »
hi there, i just got a pressure pot and iím encountering some problem.
iíve tried casting under pressure 3 times now and for some reason my resin doesnít want to cure, it just stayed in elastic mode iíve tried to balance the mixture using scale still the same result. does pressure affect the curing prosess? cause i have the same problem with my silicone curing under pressure, seems that it took longer to cure. i dont know if my silicone and resin is expired  cause i just bought them.
i cant get access to most common type of resin you guys use like smooth-on or alumilite so i just have a non branded d-80 resin and i use rtv silicone.


Sent from my iPhone using Tapatalk

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1172 on: Mon, 26 March 2018, 20:54:40 »
hi there, i just got a pressure pot and iím encountering some problem.
iíve tried casting under pressure 3 times now and for some reason my resin doesnít want to cure, it just stayed in elastic mode iíve tried to balance the mixture using scale still the same result. does pressure affect the curing prosess? cause i have the same problem with my silicone curing under pressure, seems that it took longer to cure. i dont know if my silicone and resin is expired  cause i just bought them.
i cant get access to most common type of resin you guys use like smooth-on or alumilite so i just have a non branded d-80 resin and i use rtv silicone.


Sent from my iPhone using Tapatalk

I actually use a local resin and silicone brand here in Malaysia so i dont think that matters. Also, i havent experienced pressure affecting the curing time. What i can guess is that either you dont mix them enough or you use less catalyst/hardener thats why it cures slower. Try to refine those 2 points and see what happens. Else if it still doesnt and you already followed the proper instruction of your resin/silicone, you need to contact your supplier to ask why.

I also used expired resin/silicone and they work just fine. The only difference they have with non-expired materials is that expired ones is more thicker and harder to stir but still usable. Hope that helps and GL.
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline gr4v3m4n

  • Posts: 104
  • Location: kaps land
    • my store
Re: My DIY Caps
« Reply #1173 on: Mon, 26 March 2018, 21:04:37 »
hi there, i just got a pressure pot and iím encountering some problem.
iíve tried casting under pressure 3 times now and for some reason my resin doesnít want to cure, it just stayed in elastic mode iíve tried to balance the mixture using scale still the same result. does pressure affect the curing prosess? cause i have the same problem with my silicone curing under pressure, seems that it took longer to cure. i dont know if my silicone and resin is expired  cause i just bought them.
i cant get access to most common type of resin you guys use like smooth-on or alumilite so i just have a non branded d-80 resin and i use rtv silicone.


Sent from my iPhone using Tapatalk

I actually use a local resin and silicone brand here in Malaysia so i dont think that matters. Also, i havent experienced pressure affecting the curing time. What i can guess is that either you dont mix them enough or you use less catalyst/hardener thats why it cures slower. Try to refine those 2 points and see what happens. Else if it still doesnt and you already followed the proper instruction of your resin/silicone, you need to contact your supplier to ask why.

I also used expired resin/silicone and they work just fine. The only difference they have with non-expired materials is that expired ones is more thicker and harder to stir but still usable. Hope that helps and GL.
i use 2 mixing cup to measure the volume which i use over again after i clean ofcourse, i did the same thing with the silicone its easier to clean the cup. is it possible thats the cause? its impossible to clean spotless but iíve been doing that since the beginning and iíve had no problem until i try preessure casting. but iíll try more detailed measuring and mixing, thanks for the reply.


Sent from my iPhone using Tapatalk

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1174 on: Mon, 26 March 2018, 21:16:09 »
hi there, i just got a pressure pot and iím encountering some problem.
iíve tried casting under pressure 3 times now and for some reason my resin doesnít want to cure, it just stayed in elastic mode iíve tried to balance the mixture using scale still the same result. does pressure affect the curing prosess? cause i have the same problem with my silicone curing under pressure, seems that it took longer to cure. i dont know if my silicone and resin is expired  cause i just bought them.
i cant get access to most common type of resin you guys use like smooth-on or alumilite so i just have a non branded d-80 resin and i use rtv silicone.


Sent from my iPhone using Tapatalk

I actually use a local resin and silicone brand here in Malaysia so i dont think that matters. Also, i havent experienced pressure affecting the curing time. What i can guess is that either you dont mix them enough or you use less catalyst/hardener thats why it cures slower. Try to refine those 2 points and see what happens. Else if it still doesnt and you already followed the proper instruction of your resin/silicone, you need to contact your supplier to ask why.

I also used expired resin/silicone and they work just fine. The only difference they have with non-expired materials is that expired ones is more thicker and harder to stir but still usable. Hope that helps and GL.
i use 2 mixing cup to measure the volume which i use over again after i clean ofcourse, i did the same thing with the silicone its easier to clean the cup. is it possible thats the cause? its impossible to clean spotless but iíve been doing that since the beginning and iíve had no problem until i try preessure casting. but iíll try more detailed measuring and mixing, thanks for the reply.


Sent from my iPhone using Tapatalk
i use disposable cups for resin and silicone cause cleaning them is a pain and time consuming. Try it with a fresh cups and see if that helps. Also make sure you stir really well. One thing i always notice when transitioning from potless casting to using pressure pot is you got used to careful stirring which is not required already and just have a go at it and dont mind the bubbles since that would go away when being pressured.
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline gr4v3m4n

  • Posts: 104
  • Location: kaps land
    • my store
Re: My DIY Caps
« Reply #1175 on: Mon, 26 March 2018, 21:20:18 »
hi there, i just got a pressure pot and iím encountering some problem.
iíve tried casting under pressure 3 times now and for some reason my resin doesnít want to cure, it just stayed in elastic mode iíve tried to balance the mixture using scale still the same result. does pressure affect the curing prosess? cause i have the same problem with my silicone curing under pressure, seems that it took longer to cure. i dont know if my silicone and resin is expired  cause i just bought them.
i cant get access to most common type of resin you guys use like smooth-on or alumilite so i just have a non branded d-80 resin and i use rtv silicone.


Sent from my iPhone using Tapatalk

I actually use a local resin and silicone brand here in Malaysia so i dont think that matters. Also, i havent experienced pressure affecting the curing time. What i can guess is that either you dont mix them enough or you use less catalyst/hardener thats why it cures slower. Try to refine those 2 points and see what happens. Else if it still doesnt and you already followed the proper instruction of your resin/silicone, you need to contact your supplier to ask why.

I also used expired resin/silicone and they work just fine. The only difference they have with non-expired materials is that expired ones is more thicker and harder to stir but still usable. Hope that helps and GL.
i use 2 mixing cup to measure the volume which i use over again after i clean ofcourse, i did the same thing with the silicone its easier to clean the cup. is it possible thats the cause? its impossible to clean spotless but iíve been doing that since the beginning and iíve had no problem until i try preessure casting. but iíll try more detailed measuring and mixing, thanks for the reply.


Sent from my iPhone using Tapatalk
i use disposable cups for resin and silicone cause cleaning them is a pain and time consuming. Try it with a fresh cups and see if that helps. Also make sure you stir really well. One thing i always notice when transitioning from potless casting to using pressure pot is you got used to careful stirring which is not required already and just have a go at it and dont mind the bubbles since that would go away when being pressured.
ok, will do. thank you so much


Sent from my iPhone using Tapatalk

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1176 on: Fri, 11 May 2018, 05:22:19 »
NSFW random sculpts  :blank:
More
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Online romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8382
  • Location: The Windy City
Re: My DIY Caps
« Reply #1177 on: Fri, 11 May 2018, 09:46:40 »
NSFW random sculpts  :blank:
More
Show Image

I love it.

Online Waateva

  • * Esteemed Elder
  • Posts: 1751
  • Location: Michigan, USA
Re: My DIY Caps
« Reply #1178 on: Fri, 11 May 2018, 10:05:39 »
NSFW random sculpts  :blank:
More
Show Image

I love it.

Of course you do

More
More
More
More
Duck Black Bird - 80g Gatistotles /// O'Mira - V Blacks /// LZ GH v2 - V Clears /// NIU40 - Ergo Clears

Offline mogo

  • Posts: 582
  • handshoes and horse grenades
Re: My DIY Caps
« Reply #1179 on: Fri, 11 May 2018, 10:18:09 »
NSFW random sculpts  :blank:
More
Show Image

Oh my.  :blank:

Offline gr4v3m4n

  • Posts: 104
  • Location: kaps land
    • my store
Re: My DIY Caps
« Reply #1180 on: Fri, 11 May 2018, 10:22:23 »
NSFW random sculpts  :blank:
More
Show Image
BALLSSS


Sent from my iPhone using Tapatalk

Online csmertx

  • proprietor of waffles
  • * Elevated Elder
  • Posts: 2406
  • Location: Gainesville, FL
    • https://csmertx.github.io
Re: My DIY Caps
« Reply #1181 on: Fri, 11 May 2018, 12:25:25 »
 / another 3d keyboard model thread / open source sucks / github 
Quote
...Especially the Florida cousins, who obviously can't take a hint.

Offline Krytone

  • * Maker
  • Thread Starter
  • Posts: 596
  • Location: Rollin in the deep
  • ᕦ(Ú_ůˇ)ᕤ
    • Krap Shop
Re: My DIY Caps
« Reply #1182 on: Sat, 12 May 2018, 01:06:42 »
TGR Jane CE | TX-CP | ZZ96 | HHKB | Ducky Shine 3 | Atreus | Infinity Ergodox | IBM Model M | Smart Pad | Taobao Acrylic 96 | TGR910 SE | RGB96 | M4-A | Moon

Pending: Exent | EM7 | M-60 | Kira EXS | 910 Poly | Kn210 | Alice

Offline Montaberne

  • Posts: 1
  • Location: Montreal
Re: My DIY Caps
« Reply #1183 on: Sat, 12 May 2018, 19:43:06 »
Ok wow. That's awesome! Great work.