Author Topic: [WTS] HKP Bloodsplat (Topre), Stock Poker 2 Case, Green on White Backlit Caps  (Read 28228 times)

0 Members and 2 Guests are viewing this topic.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Hot Key Project Bloodsplat (Topre) $30 + $7.50 USPS Priority Shipping



This is a BOTTOM ROW keycap, for things like the windows key.
The black color is a bit darker than the dark grey caps that are on stock topre keyboards btw.


Poker 2 Stock Case $10 + Shipping



All Pics:
https://imgur.com/a/PfAzF7I

Case is in good condition, has been used but there appears to be no damage to it.
The bottom right/middle area case mount did snap off at one point in time so I super glued it back on.
I don't think it's going to break off, but I thought I should point that out.


Green on White Backlit ABS Doubleshot Keycaps $20 + $7.50 USPS Priority Shipping


In great condition, barely used, no visible shine.
Does NOT come with the keycap tray



More
More
SOLD Reactor Core Green V2 (GID) $75 + Shipping
MX Stem

More
SOLD Ribbit V2 $75 + Shipping
TMX Stem

More
Nubbinator Dollys YOU GET BOTH (no idea color or name) $50 + Shipping SOLD
MX Stem on both (2nd one had a stem swap and it isn't perfectly level, can probably fix that if you swap the stem again)



More
Blackout Reaper $70 + Shipping SOLD
Topre Stem

More
SOLD Booper Lilith (no idea name) $60 + Shipping
MX Stem
« Last Edit: Sat, 16 February 2019, 15:10:55 by HPE1000 »

Offline ComradeSniper

  • HHKB Pro
  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 1086
  • Location: Montana
Re: [WTB] 360 Corsa
« Reply #1 on: Sat, 15 November 2014, 21:58:35 »
Good luck dude, I hope you find one  :)

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 360 Corsa
« Reply #2 on: Tue, 18 November 2014, 08:02:28 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] GMK 7u Black Cherry Spacebar
« Reply #3 on: Sat, 22 November 2014, 20:45:38 »
Bump

Want 7 unit black cherry spacebar from gmk groupbuy. I will buy 2-3 if you have them.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] GMK 7u Black Cherry Spacebar
« Reply #4 on: Sun, 23 November 2014, 23:18:52 »
beep

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Green DSA Retro Keys (Return and ESC)
« Reply #5 on: Sat, 29 November 2014, 12:03:01 »
halp

I would like to buy the green keys that were included in the DSA Retro keycap set. The keys are the return and esc key in this picture


Offline codymaust

  • Trade Count: (0)
  • Posts: 95
  • Location: Pittsburgh, PA
Re: [WTB] Green DSA Retro Keys (Return and ESC)
« Reply #6 on: Sat, 29 November 2014, 19:17:43 »
Just sent you a PM

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Cherry G80-8200 Black Cable
« Reply #7 on: Tue, 02 December 2014, 08:01:36 »
Need Black cable from Cherry G80-8200

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14448
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: [WTB] Cherry G80-8200 Black Cable
« Reply #8 on: Tue, 02 December 2014, 08:21:48 »
I think I've got the cable you are after. But I'm really slow at getting to things.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Cherry G80-8200 Black Cable
« Reply #9 on: Tue, 02 December 2014, 08:23:53 »
I think I've got the cable you are after. But I'm really slow at getting to things.
Sounds good, no rush at all so take your time  ;)

Offline berserkfan

  • Trade Count: (0)
  • Posts: 2136
  • Location: Not CONUS Not CONUS Not CONUS Not CONUS
  • changing diapers is more fun than model f assembly
Re: [WTB] Cherry G80-8200 Black Cable
« Reply #10 on: Tue, 02 December 2014, 09:31:24 »
Damn, I gave my new cable away already. What a coincidence!
« Last Edit: Tue, 02 December 2014, 12:38:16 by berserkfan »
Most of the modding can be done on your own once you break through the psychological barriers.

Offline Helterr

  • Trade Count: (0)
  • Posts: 11
  • Location: Pennsylvania
Re: [WTB] Cherry G80-8200 Black Cable
« Reply #11 on: Tue, 02 December 2014, 10:11:47 »
Aw man, I just saw one on /r/mechmarket a couple weeks ago
WTB: Any Warmasters! Feel free to PM me!

Offline inlikeflynn

  • * Esteemed Elder
  • Trade Count: (0)
  • Posts: 768
  • Location: MN
  • file not found
Re: [WTB] Cherry G80-8200 Black Cable
« Reply #12 on: Tue, 02 December 2014, 11:04:32 »
WTB:

Black cable from Cherry G80-8200

any different than an 8113 or other 8000 cable? from this picture it looks like maybe just the usual wider cherry connector plug, but not sure if 4 or 5 wire in this photo
----------- __o
--------- _`\<,_
BRAAP(>)/ (*)
************^^^^^^

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Cherry G80-8200 Black Cable, OTD Hand Doubleshot Cap (White on Red)
« Reply #13 on: Fri, 12 December 2014, 20:24:48 »
Still kinda looking for that cable, not an emergency or anything.

Also it would be cool if someone had a white on red OTD hand doubleshot. I saw a bunch of them in peoples pictures from the SP grab bags from this year. I have a bunch of novelty keycaps left over from that grab bag, we could trade or something.

Offline berserkfan

  • Trade Count: (0)
  • Posts: 2136
  • Location: Not CONUS Not CONUS Not CONUS Not CONUS
  • changing diapers is more fun than model f assembly
Re: [WTB] Cherry G80-8200 Black Cable, OTD Hand Doubleshot Cap (White on Red)
« Reply #14 on: Fri, 12 December 2014, 23:41:25 »
WTB:

Black cable from Cherry G80-8200

OTD Hand Doubleshot Cap (White on Red)

If you just need a classy looking coiled cable I will be listing a few shortly. These are from various Model Ms, so they are gray and very heavy but I think with a bit of adapting you will be ok.
Most of the modding can be done on your own once you break through the psychological barriers.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Cherry G80-8200 Black Cable, OTD Hand Doubleshot Cap (White on Red)
« Reply #15 on: Mon, 15 December 2014, 18:51:52 »
WTB:

Black cable from Cherry G80-8200

OTD Hand Doubleshot Cap (White on Red)

If you just need a classy looking coiled cable I will be listing a few shortly. These are from various Model Ms, so they are gray and very heavy but I think with a bit of adapting you will be ok.
I want to be sure they will work on the keyboard, and black is preferable. Thanks for the offer though :)

Bump

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Trade Count: (0)
  • Posts: 8199
  • Location: USA
Re: [WTB] Cherry G80-8200 Black Cable, OTD Hand Doubleshot Cap (White on Red)
« Reply #16 on: Mon, 15 December 2014, 18:58:21 »
I have one of those G80 cables sitting here. A few of the last turns are a bit stretched out, but otherwise is all good... black PS/2 type with purple plug. $4 shipped should cover it.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Cherry G80-8200 Black Cable, OTD Hand Doubleshot Cap (White on Red)
« Reply #17 on: Mon, 15 December 2014, 19:08:24 »
I have one of those G80 cables sitting here. A few of the last turns are a bit stretched out, but otherwise is all good... black PS/2 type with purple plug. $4 shipped should cover it.
Sounds good, thank you Ivan!  :)

Offline berserkfan

  • Trade Count: (0)
  • Posts: 2136
  • Location: Not CONUS Not CONUS Not CONUS Not CONUS
  • changing diapers is more fun than model f assembly
Re: [WTB] Cherry G80-8200 Black Cable, OTD Hand Doubleshot Cap (White on Red)
« Reply #18 on: Tue, 16 December 2014, 12:07:42 »
I have one of those G80 cables sitting here. A few of the last turns are a bit stretched out, but otherwise is all good... black PS/2 type with purple plug. $4 shipped should cover it.

Trust Ivan to keep on stock all kinds of parts!

Say... do you have a cable or controller box that can work on the G80-9009HAU, aka Reuters keyboard?
Most of the modding can be done on your own once you break through the psychological barriers.

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Trade Count: (0)
  • Posts: 8199
  • Location: USA
Re: [WTB] Cherry G80-8200 Black Cable, OTD Hand Doubleshot Cap (White on Red)
« Reply #19 on: Tue, 16 December 2014, 12:55:24 »
Sent.

No I don't have anything for 9009, never had one of those.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Dolch Numpad Set + Cherry PCB Mount Stabs for Numpad
« Reply #20 on: Wed, 25 March 2015, 16:38:34 »
Bump

Looking for a dolch numpad set from ivans recent GB.

Also looking for cherry PCB mount stabilizers for a numpad (3 stabs)

Offline azhdar

  • Praise the AZERTY god
  • Trade Count: (0)
  • Posts: 2297
  • Location: France
  • 65% Enlighted

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Dolch Numpad Set + Cherry PCB Mount Stabs for Numpad
« Reply #22 on: Wed, 25 March 2015, 18:36:41 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Cherry PCB Mount Stabilizers for Numpad + 7u Spacebar Wire
« Reply #23 on: Thu, 26 March 2015, 18:24:40 »
Bump

Just looking for the cherry pcb mount stabilizers for a numpad and a 7u spacebar wire if possible.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 23 Commando Keycap Set
« Reply #24 on: Fri, 10 April 2015, 15:15:07 »
Looking for the 23 Commando keycap set. :)

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 23 Commando Keycap Set
« Reply #25 on: Sat, 11 April 2015, 14:46:52 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 23 Commando Keycap Set
« Reply #26 on: Sun, 12 April 2015, 16:31:53 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 23 Commando Keycap Set
« Reply #27 on: Tue, 14 April 2015, 20:31:06 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 23 Commando Keycap Set
« Reply #28 on: Thu, 16 April 2015, 10:31:13 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 23 Commando Keycap Set
« Reply #29 on: Thu, 23 April 2015, 12:15:34 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 101 vintage black switches
« Reply #30 on: Sun, 02 August 2015, 23:02:04 »
I'm looking for 101 vintage black switches. If you have any, let me know.  :)

Offline alienman82

  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 4050
Re: [WTB] 101 vintage black switches
« Reply #31 on: Mon, 03 August 2015, 13:11:43 »
removed.
« Last Edit: Thu, 01 March 2018, 17:18:00 by alienman82 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 101 vintage black switches
« Reply #32 on: Mon, 03 August 2015, 13:32:16 »
plate or pcb?
Well I just realized I need PCB mount.

Offline alienman82

  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 4050
Re: [WTB] 101 vintage black switches
« Reply #33 on: Mon, 03 August 2015, 13:48:49 »
removed.
« Last Edit: Thu, 01 March 2018, 17:17:58 by alienman82 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 101 vintage black switches
« Reply #34 on: Mon, 03 August 2015, 15:24:22 »
Looking for Cherry PCB Mount stabs for full sized board and 7x spacebar wire.


plate or pcb?
Well I just realized I need PCB mount.

I only have plate mount but good luck  :thumb:
Well I ended up getting plate mount switches but I am going to swap the bottoms out lol

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 7x Cherry Stab Spacebar Wire
« Reply #35 on: Sun, 22 November 2015, 00:09:16 »
NVM
« Last Edit: Sun, 22 November 2015, 11:12:47 by HPE1000 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Quickfire Rapid MX Red
« Reply #36 on: Wed, 13 January 2016, 18:10:10 »
pls

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Quickfire Rapid MX Red
« Reply #37 on: Thu, 14 January 2016, 20:42:08 »
boop

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Black Sprit 60% PCB, Quickfire Rapid MX Red
« Reply #38 on: Fri, 15 January 2016, 21:49:45 »
i cri everytiem

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Black or White Sprit 60% PCB, Quickfire Rapid MX Red
« Reply #39 on: Sat, 16 January 2016, 20:31:29 »


I guess it doesn't really matter if it is black or white.
« Last Edit: Sat, 16 January 2016, 20:36:49 by HPE1000 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Black or White Sprit 60% PCB, Quickfire Rapid MX Red
« Reply #40 on: Sun, 17 January 2016, 19:07:55 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 60% PCB (ง ͠° ل͜ °)ง
« Reply #41 on: Sun, 24 January 2016, 01:43:24 »

Offline VentureG

  • Trade Count: (0)
  • Posts: 64
Re: [WTB] 60% PCB (ง ͠° ل͜ °)ง
« Reply #42 on: Sun, 24 January 2016, 12:51:20 »
There's always this:

http://www.ebay.com/itm/272032784852

There are other sources to get it such as taobao and aliexpress, as well.

https://geekhack.org/index.php?topic=66624.50

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] 60% PCB (ง ͠° ل͜ °)ง
« Reply #43 on: Sun, 24 January 2016, 14:52:20 »
There's always this:

http://www.ebay.com/itm/272032784852

There are other sources to get it such as taobao and aliexpress, as well.

https://geekhack.org/index.php?topic=66624.50
Yeah I have been looking at that board. I am still not 100% sure if I want it or not since it is hard to find out how reliable they are.

Offline VentureG

  • Trade Count: (0)
  • Posts: 64
Re: [WTB] 60% PCB (ง ͠° ل͜ °)ง
« Reply #44 on: Sun, 24 January 2016, 15:20:48 »
I'll let you know late February when I get all my parts, if you're still looking.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] n0thing
« Reply #45 on: Sun, 24 January 2016, 16:39:26 »
I'll let you know late February when I get all my parts, if you're still looking.
Well I ended up getting a satan so I am all good :)

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTT: Topre Noxious V2 Brobot WTTF: MX Artisan
« Reply #46 on: Sun, 07 February 2016, 18:32:25 »

Offline fanpeople

  • Trade Count: (2)
  • Posts: 816
Re: WTT: Topre Noxious V2 Brobot WTTF: MX Artisan
« Reply #47 on: Sun, 07 February 2016, 21:24:56 »
Would you consider an mx high c u mad bro for your bbv2?

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTT: Topre Noxious V2 Brobot WTTF: MX Artisan
« Reply #48 on: Sun, 07 February 2016, 22:05:14 »
Would you consider an mx high c u mad bro for your bbv2?
I am not interested in a u mad bro. Thank you for the offer though.

Offline Durvid

  • Trade Count: (0)
  • Posts: 56
  • Location: Santa Cruz, California
  • Thunk thunk thunk..
Re: WTT: Topre Noxious V2 Brobot WTTF: MX Artisan
« Reply #49 on: Sun, 07 February 2016, 23:34:40 »
Are you interested in an MX Interstellar Green for the Noxious?

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTT: Topre Noxious V2 Brobot WTTF: MX Artisan
« Reply #50 on: Mon, 08 February 2016, 18:05:43 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: G80-3000 Case (Condition Doesn't Matter Much)
« Reply #51 on: Fri, 11 March 2016, 18:12:30 »
༼ つ ◕_◕ ༽つ

Offline azhdar

  • Praise the AZERTY god
  • Trade Count: (0)
  • Posts: 2297
  • Location: France
  • 65% Enlighted
Re: WTB: G80-3000 Case (Condition Doesn't Matter Much)
« Reply #52 on: Fri, 11 March 2016, 18:37:02 »
Pm me so I snap so I remember to snap of pic of it when home

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: G80-3000 Case (Condition Doesn't Matter Much)
« Reply #53 on: Fri, 11 March 2016, 22:45:59 »
Pm me so I snap so I remember to snap of pic of it when home

PM'd

Plus I should note for everyone, I am looking for a WKL case and I am going to be painting this so I am not looking for a mint condition case.

Thanks

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: 1 Nixdorf Black
« Reply #54 on: Wed, 25 May 2016, 18:28:34 »
pls make me dream come true, I just want one. preferably one in good condition as far as no dents or major scratches on the housing.


Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: 1 Nixdorf Black
« Reply #55 on: Thu, 26 May 2016, 18:51:09 »
bumperino

Offline Michael

  • Formerly Bro Caps
  • * Maker
  • Trade Count: (0)
  • Posts: 4632
  • REEEeeeeEEEEEEEEeeeeeeeeeeeEEEEEEEEEEEEEEEeeeee
Re: WTB: 1 Nixdorf Black
« Reply #56 on: Thu, 26 May 2016, 19:37:44 »

Offline Photekq

  • wheat flour zone
  • Trade Count: (1)
  • Posts: 4634
  • Location: North Wales/Loughborough, UK
Re: WTB: 1 Nixdorf Black
« Reply #57 on: Thu, 26 May 2016, 19:42:46 »
If you can wait like a month I can hook you up with a switch for $100.

Offline Photekq

  • wheat flour zone
  • Trade Count: (1)
  • Posts: 4634
  • Location: North Wales/Loughborough, UK
Re: WTB: 1 Nixdorf Black
« Reply #58 on: Thu, 26 May 2016, 19:43:04 »
If you can wait like a month I can hook you up with a switch for $100.
Or free. Whichever you prefer.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: 1 Nixdorf Black
« Reply #59 on: Thu, 26 May 2016, 19:49:05 »
I want just one Nixdorf Black pls


Show Image


If you can wait like a month I can hook you up with a switch for $100.
Or free. Whichever you prefer.
I will pay no more than $99 and that is my final offer.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS
« Reply #60 on: Wed, 08 June 2016, 10:17:46 »
i WOULD LiKE SOME GMK QMX CLiPS


Offline admiralvorian

  • Trade Count: (0)
  • Posts: 323
  • Location: United States
  • DIY
Re: WTB: GMK QMX CLiPS
« Reply #61 on: Wed, 08 June 2016, 11:59:51 »
i WOULD LiKE SOME GMK QMX CLiPS

Show Image


MY MAiN GOAL
iS TO BLOW UP
AND PRETEND LiKE i DONT KNOW NOBODYYY
Darude Status:
☐ Not Sandstorm
☑ Sandstorm                                               wts wtt wtb

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: USED QFR <$50 SHiPPED
« Reply #62 on: Fri, 10 June 2016, 19:44:39 »
i WOULD LiKE SOME GMK QMX CLiPS

Show Image


MY MAiN GOAL
iS TO BLOW UP
AND PRETEND LiKE i DONT KNOW NOBODYYY
YOU KNOW iT

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: USED QFR <$50 SHiPPED
« Reply #63 on: Sat, 11 June 2016, 19:11:20 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: USED QFR ~$50 SHiPPED
« Reply #64 on: Sun, 12 June 2016, 19:48:51 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: USED QFR ~$50 SHiPPED
« Reply #65 on: Mon, 13 June 2016, 20:18:26 »

Offline jerue

  • (Whenever that happens :P)
  • * Destiny Supporter
  • Trade Count: (0)
  • Posts: 1228
  • Location: SC
Re: WTB: USED QFR ~$50 SHiPPED
« Reply #66 on: Tue, 14 June 2016, 17:03:17 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: USED QFR ~$50 SHiPPED
« Reply #67 on: Tue, 14 June 2016, 17:26:10 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: WARiO KEYCAP
« Reply #68 on: Mon, 20 June 2016, 16:05:49 »
i WOULD LiKE THE WARiO DOUBLESHOT/DYESUB KEYCAP THAT THEY USED TO SELL ON TECHKEYS. THANK YOU

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: WARiO KEYCAP
« Reply #69 on: Thu, 30 June 2016, 18:10:29 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS
« Reply #70 on: Mon, 11 July 2016, 14:51:59 »
get them while they are hot


Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS
« Reply #71 on: Tue, 12 July 2016, 14:48:10 »
rip keyboard


Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS
« Reply #72 on: Wed, 13 July 2016, 18:38:37 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS
« Reply #73 on: Sun, 17 July 2016, 12:47:22 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS
« Reply #74 on: Mon, 18 July 2016, 15:57:35 »
 .

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS
« Reply #75 on: Tue, 19 July 2016, 19:03:09 »
































.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS
« Reply #76 on: Wed, 20 July 2016, 19:27:27 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS $25 SHiPPED CONUS ONLY
« Reply #77 on: Mon, 25 July 2016, 13:33:46 »
 :blank:

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS $25 SHiPPED CONUS ONLY
« Reply #78 on: Tue, 26 July 2016, 13:36:39 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS $25 SHiPPED CONUS ONLY
« Reply #79 on: Wed, 27 July 2016, 14:31:32 »
someone buy them pls

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS $25 SHiPPED CONUS ONLY
« Reply #80 on: Tue, 02 August 2016, 17:39:04 »
 :-X

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS $25 SHiPPED CONUS ONLY
« Reply #81 on: Wed, 03 August 2016, 17:33:15 »
PLEASE BUY iT

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS $25 SHiPPED CONUS ONLY
« Reply #82 on: Thu, 11 August 2016, 15:09:47 »
-

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: 87 USED CHERRY MX BROWNS $25 SHiPPED CONUS ONLY
« Reply #83 on: Tue, 16 August 2016, 18:59:35 »
bumppppppppppppppppppppp

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Used EVGA GTX670 2GB - 87 Used Cherry MX Browns
« Reply #84 on: Thu, 18 August 2016, 16:23:55 »
Bumperino

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Used EVGA GTX670 2GB - 87 Used Cherry MX Browns
« Reply #85 on: Fri, 19 August 2016, 19:14:41 »
buy eeet

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Used EVGA GTX670 2GB - 87 Used Cherry MX Browns
« Reply #86 on: Sat, 20 August 2016, 19:05:03 »
 :blank:

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: OTD TKL PCB
« Reply #87 on: Tue, 06 September 2016, 16:59:06 »
boop probably impossible to find

Offline alienman82

  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 4050
Re: WTB: OTD TKL PCB
« Reply #88 on: Wed, 07 September 2016, 10:22:11 »
removed.
« Last Edit: Thu, 01 March 2018, 14:12:47 by alienman82 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: OTD TKL PCB
« Reply #89 on: Wed, 07 September 2016, 11:04:22 »
boop probably impossible to find

usually only one was made per board except for the koala as far as I know.  There was a replica PCB and plate with backlighting on TaoBao, but I think that GB has since Gone away.
Yeah the thing is I do not NEED one, but it would be nice to have one sitting around. I wasn't aware that they simply don't make more PCBS than boards though, doesn't make much sense to me :/

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLIP, OTD TKL PCB
« Reply #90 on: Sun, 30 October 2016, 00:05:15 »
 :llama:

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB
« Reply #91 on: Mon, 31 October 2016, 11:48:36 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB
« Reply #92 on: Tue, 01 November 2016, 21:25:59 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB
« Reply #93 on: Wed, 02 November 2016, 19:42:08 »
boop

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB
« Reply #94 on: Fri, 04 November 2016, 18:44:33 »
BAMP

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 MATiAS SWiTCH, 1 NiXDORF BLACK
« Reply #95 on: Mon, 07 November 2016, 20:22:30 »
HALP

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 MATiAS SWiTCH, 1 NiXDORF BLACK
« Reply #96 on: Wed, 09 November 2016, 14:56:47 »

Offline ctm

  • Trade Count: (0)
  • Posts: 423
  • Location: Seattle, WA
  • Hello, world!
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 MATiAS SWiTCH, 1 NiXDORF BLACK
« Reply #97 on: Fri, 11 November 2016, 07:50:57 »
Are you still looking for one Matias switch? I have a few spare one for Click, Quiet Click and Quiet Linear.
TMK Alps64 w/ Matias Quiet Switches in KBP V60 case.
Infinity60 with SKCM Orange Switches w/ TMK.
CM Storm QRF w/ Frosty Flake controller, Cherry MX Blue Switches and TMK firmware.


Coming:
Ellipse Model F F62.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 MATiAS SWiTCH, 1 NiXDORF BLACK
« Reply #98 on: Fri, 11 November 2016, 09:26:47 »
Are you still looking for one Matias switch? I have a few spare one for Click, Quiet Click and Quiet Linear.
Yeah. A click one would be appreciated :)

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK
« Reply #99 on: Sun, 13 November 2016, 10:16:11 »
bump

Online ideus

  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 7169
  • Location: In the middle of nowhere.
  • Björkö.
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK
« Reply #100 on: Sun, 13 November 2016, 10:19:42 »
You may try the Zealencios instead of the QMX, apparently, they have the advantage that they do work with plate mounted switches. Its drop is still active. Disclaimer: I have not used any silencer of the clip type ever, I really like the noise  of my boards.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK
« Reply #101 on: Sun, 13 November 2016, 12:15:30 »
You may try the Zealencios instead of the QMX, apparently, they have the advantage that they do work with plate mounted switches. Its drop is still active. Disclaimer: I have not used any silencer of the clip type ever, I really like the noise  of my boards.
I am using on a pcb mount board, plus I am not paying 80 or whatever dollars for them before shipping. That is ridiculous :/

I'll prob just end up ordering them from germany
« Last Edit: Sun, 13 November 2016, 12:20:25 by HPE1000 »

Online ideus

  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 7169
  • Location: In the middle of nowhere.
  • Björkö.
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK
« Reply #102 on: Sun, 13 November 2016, 13:20:23 »
You may try the Zealencios instead of the QMX, apparently, they have the advantage that they do work with plate mounted switches. Its drop is still active. Disclaimer: I have not used any silencer of the clip type ever, I really like the noise  of my boards.
I am using on a pcb mount board, plus I am not paying 80 or whatever dollars for them before shipping. That is ridiculous :/

I'll prob just end up ordering them from germany


The need to silence a mechanical board is beyond logic to me; but, I respect those who want to do so; however, I will never push anyone into it. Just for the record, the silencers are at forty dollars, not eighty. Good luck.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK
« Reply #103 on: Sun, 13 November 2016, 13:22:23 »
You may try the Zealencios instead of the QMX, apparently, they have the advantage that they do work with plate mounted switches. Its drop is still active. Disclaimer: I have not used any silencer of the clip type ever, I really like the noise  of my boards.
I am using on a pcb mount board, plus I am not paying 80 or whatever dollars for them before shipping. That is ridiculous :/

I'll prob just end up ordering them from germany


The need to silence a mechanical board is beyond logic to me; but, I respect those who want to do so; however, I will never push anyone into it. Just for the record, the silencers are at forty dollars, not eighty. Good luck.
Oh its for a full size keyboard so that is kinda the problem. The 110 option was like +35 or something. :(

But yeah, I understand. The only reason I want to do it is because it is on a pcb mount linear board with SA caps on it, so it might sound pretty cool with them.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK
« Reply #104 on: Mon, 14 November 2016, 16:51:44 »
boop

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK
« Reply #105 on: Mon, 21 November 2016, 17:24:33 »
ayyyy

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #106 on: Thu, 24 November 2016, 10:44:19 »
haay

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #107 on: Sat, 26 November 2016, 10:18:53 »
 ^-^

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #108 on: Tue, 29 November 2016, 18:50:41 »
pls

Offline pr0ximity

  • Trade Count: (0)
  • Posts: 2310
  • Location: Vacationland
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #109 on: Tue, 29 November 2016, 19:21:19 »
Seller here claims there are 87-key PCBs on Taobao that fit a 456GT: https://www.reddit.com/r/mechmarket/comments/5fda4o/ustx_h_otd_456gt_custom_rgb_tkl_rs96_internals/

Might try contacting them for details or look around.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #110 on: Tue, 29 November 2016, 21:26:54 »
Seller here claims there are 87-key PCBs on Taobao that fit a 456GT: https://www.reddit.com/r/mechmarket/comments/5fda4o/ustx_h_otd_456gt_custom_rgb_tkl_rs96_internals/

Might try contacting them for details or look around.
I've seen them, but I am only interested in an original. I dont NEED another pcb, but it'd be nice to have considering how terrible these otd pcbs are.

Thanks for letting me know though :)

Offline Damonskv

  • Trade Count: (0)
  • Posts: 258
  • Location: Moscow, Russia
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #111 on: Wed, 30 November 2016, 05:03:56 »
Hi, can you tell what is special about nixdorf?

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #112 on: Wed, 30 November 2016, 07:28:24 »
Hi, can you tell what is special about nixdorf?
For me just the novelty. But they are pretty rare mx black switches with milky white tops similar to gateron switches. They are smoother than normal mx blacks as well. I just want one since I have an mx super black switch and it'd be cool to have another type of rare mx black switch, since they are my favorite switches.

Offline Damonskv

  • Trade Count: (0)
  • Posts: 258
  • Location: Moscow, Russia
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #113 on: Wed, 30 November 2016, 07:32:33 »
Hi, can you tell what is special about nixdorf?
For me just the novelty. But they are pretty rare mx black switches with milky white tops similar to gateron switches. They are smoother than normal mx blacks as well. I just want one since I have an mx super black switch and it'd be cool to have another type of rare mx black switch, since they are my favorite switches.
GL in your search, I only recently discovered vintage blacks and are in full admiration

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #114 on: Wed, 07 December 2016, 21:12:50 »
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Offline nasby99

  • Trade Count: (0)
  • Posts: 259
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #115 on: Thu, 15 December 2016, 22:28:26 »
 ^-^   hpe1000   hello..

what's otd tkl(tenkeyless) pcb???

what kind of pcb??   :eek:
What I have currently
356CL(Black,Gun-metal), 356L, 356.2, 356DGE,356N MK2, 356MINI v1(military,red) 356MINI v2(red) 360c(apple silver,hyper blue),Koala,Cheat..
G81-3000SAV, G81-3100SAV,G81-3004SAT,G81-3000SAT,G81-3000SPBUS,G80-3000HAV,G80-2100HDU...

What I want to get now
Nothing atm

Offline jerue

  • (Whenever that happens :P)
  • * Destiny Supporter
  • Trade Count: (0)
  • Posts: 1228
  • Location: SC
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #116 on: Fri, 16 December 2016, 18:19:45 »
^-^   hpe1000   hello..

what's otd tkl(tenkeyless) pcb???

what kind of pcb??   :eek:

I think he is looking for extra red PCB used on 360c and 456GT/356.2 etc.

like this (photo from photekq):


Offline nasby99

  • Trade Count: (0)
  • Posts: 259
Re: WTB: GMK QMX CLiPS, OTD TKL PCB, 1 NiXDORF BLACK, G80-3000 WKL CASE
« Reply #117 on: Fri, 16 December 2016, 18:25:55 »
Ahhh   i see.  Common otd red pcb    yah   that s right.  But it s almost impossible to get only pcb+plate? Who sell pcb+and plate remaining housing?  Maker didnt make spare pcb+plate 

나의 SM-A700K 의 Tapatalk에서 보냄

What I have currently
356CL(Black,Gun-metal), 356L, 356.2, 356DGE,356N MK2, 356MINI v1(military,red) 356MINI v2(red) 360c(apple silver,hyper blue),Koala,Cheat..
G81-3000SAV, G81-3100SAV,G81-3004SAT,G81-3000SAT,G81-3000SPBUS,G80-3000HAV,G80-2100HDU...

What I want to get now
Nothing atm

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: Numpad keycap set for Leopold FC210
« Reply #118 on: Thu, 19 January 2017, 21:22:45 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: SA Numpad Keycaps
« Reply #119 on: Sat, 21 January 2017, 09:33:25 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: SA Numpad Keycaps
« Reply #120 on: Sun, 22 January 2017, 10:42:30 »
.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: SA Numpad Keycaps
« Reply #121 on: Mon, 23 January 2017, 10:48:51 »
 :-*

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: WKL Cherry G80 3000 Case
« Reply #122 on: Sat, 04 February 2017, 16:51:13 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: WKL Cherry G80 3000 Case
« Reply #123 on: Sun, 05 February 2017, 16:57:44 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: WKL Cherry G80 3000 Case
« Reply #124 on: Mon, 06 February 2017, 16:24:31 »
bump
« Last Edit: Wed, 11 October 2017, 16:18:17 by HPE1000 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTT: Brocaps WTTF: Brocaps, Clacks, Etc (???)
« Reply #125 on: Wed, 11 October 2017, 16:18:27 »
bump????

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTT: Brocaps WTTF: Brocaps, Clacks, Etc (???)
« Reply #126 on: Wed, 11 October 2017, 17:21:10 »
Should have clarified, only interested in MX caps in exchange.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTT: Brocaps WTTF: Brocaps, Clacks, Etc (???)
« Reply #127 on: Mon, 16 October 2017, 13:44:32 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red 60% Case, 69 Green Alps, Alps Keycap Sets WTT: Black Topre Reaper
« Reply #128 on: Wed, 11 April 2018, 17:24:36 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red 60% Case, 69 Green Alps, Alps Keycap Sets WTT: Black Topre Reaper
« Reply #129 on: Sun, 22 April 2018, 14:02:00 »
 :llama:

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red 60% Case, 69 Green Alps, Alps Keycap Sets WTT: Black Topre Reaper
« Reply #130 on: Fri, 27 April 2018, 15:01:14 »
BUMP WoB Alps Caps Gone

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red 60% Case, 69 Green Alps, Alps Keycap Set WTT: Black Topre Reaper
« Reply #131 on: Mon, 30 April 2018, 11:45:55 »
 :-*

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red 60% Case, Alps Keycap Set WTT: Black Topre Reaper Brocap
« Reply #132 on: Mon, 30 April 2018, 19:19:18 »
alps switches gone

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red Dolch Alps Keycap Set WTT: Black Topre Reaper W: MX Artisan
« Reply #133 on: Wed, 02 May 2018, 18:02:18 »
pls

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red Dolch Alps Keycap Set WTT: Black Topre Reaper W: MX Artisan
« Reply #134 on: Mon, 07 May 2018, 11:21:22 »
esketit

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red Dolch Alps Keycap Set WTT: Black Topre Reaper W: MX Artisan
« Reply #135 on: Thu, 14 June 2018, 13:25:28 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: Cheap Filco MJ2 TKL WTT: Black Topre Reaper W: MX Artisan
« Reply #136 on: Wed, 19 September 2018, 17:43:24 »
B U M P

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: Cheap Filco MJ2 TKL WTT: Black Topre Reaper W: MX Artisan
« Reply #137 on: Mon, 24 September 2018, 12:31:06 »
boop

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: Cheap Filco MJ2 TKL WTS: Red Aluminum 60% Case
« Reply #138 on: Tue, 25 September 2018, 12:19:42 »
bamp

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: Cheap Filco MJ2 TKL WTS: Red Aluminum 60% Case
« Reply #139 on: Thu, 27 September 2018, 13:26:39 »
b̵̧̧̡̧̛̬̩͇̠͔̳̬̖̱̹̙̬̪̠͙̮̦̭̻̼̜̩̳̠͎̹̩͕̤̻̲̖̮̘̳̫̹̥̙̜̰̤̳̓͐͐̂́̓͌̈́̄̂̅͌͛̾̊͗̌̆̈̈́̊͑̉̆́͂̀̑̏̔̀̊͂́͋̍̽̌̍́̌̾̎͛̍͊́̓̊̃̇̊͒̉̽̐̑̈́̃̀͊̀̌̓̀͋̂̔̐́́́̓͋̈́̅́̒̓̐͋̾̒̒̆̀͛͑͗̋͆̽͆̈̓͂̀̅͗̋̌̍̋̈́͑̑̎̀̌̂͛̓̃̀͆̈́̀́̒̃͛̆̇̄͗͐̎̆͛̄͋̇̐̈́̀͊́̂̌͐͗͊̒͑̍͆̍̆̽̌̀̅̋̑̊͂̈̂͒̃̈́̀̆̂̎͆̊̆͛̄̈̿̊̌̀͐͒͊͗̃̇̀̊̓̃͆̈́̈́̔͂̓̾̃̅̒̄̓̐͛̓͌͊͆̿̈̏̋͗̑̎͆̂̇̓̓́̓̑̌͋͘̕̕͘̕̚̕̕̕͘̕̕͘̕̕̕̚͜͠͝͝͝͝͝͝͝͝͝͠ͅư̶̡̡̧̢̧̢̧̡̡̢̡̡̨̧̛̛̛͕̹̫̙̞̣̖̘̤̩̹̜̼͙̭̤̮͚̺̹͙̯͔̞̮̮̖͎͙̩̼͍̝͓̺͎͕̖͙͙͍͚͙̜̼̰͓̳̹̦͎̘͈̺̩̙͈͙̺̮̮͖͍͉̲̮̻̹̳̫̭̝̯̫̺̭̼̰̝͕̫̗͔̗̞͕͉̻͙̜͇̻̗̞͙̣̬̮̣̪̠͇͇͕̳͇̞͉͍̮͎͕̩̠̤̯̣̤̲̙̼͉͋̉̇̀̽̃̔̓̔̀̇͒̓̈́̽͐̅̽̈̌͛̽̑̔͋͂̈́̆́̾̎̓͂͛̎̇̍͌̀͛̃̓̌̒̏̂̅͑͒̇͒̂̌̅̊̀̅̔́̈́͒̈̊̂̏͘̕͘̚̚̚͘͜͜͜͜͝͝͝͠͝͝͝͝ͅͅͅͅm̶̧̡̛̛̛̛̛̛̛̛̠͇̭̠̟͙̦̽͑̐́̇̌͗̀͛̐̓̀̊͒̊́͂͊̀̂̆̐̔͌͊͑͑̊̔̏͌̀̇̈̈̾͑͗͋̾͋̉̽̍͐̀̆̅͗̎̇̍̽̄̏̾̒̽͑̿̏́̂̍̇̅̑̉̅͛̾̀̄̈͊͑̋̋̀͂̔̒̂̐̈̌͌̿̆̑̉̒̋̃̉̒̋͊͂͗̂̃̎̊̈́͌̈́̔̊̿̈̍͗̔̂̓͂̀̈́̂͂̑̊͛́͋͌͊̊̎̄̌̊͊̊͑̔̄̉̔̀̈́̄̾̈͂̈́̽̓̄̍̐͗͑̎̅͗̏̈́̔̔́͛͐̓̀̄̇͂̌̈́̅̎̌͗̆͂̂͑̈͐͛̾̓͗̌̃̓̃̽̂̿̿͐́͂̍́͋̃̀̽́̉̈́̒̃̈̄̀͂̈́̍̓̽͑̒̃́̈́͋͘͘͘͘͘̕̚͘̚̚͘̕̚͘͘̚̕͘̕̚̕͘̚͘̚͘͠͝͝͠͠͠͝͝͝͝͝͝͝͝͝͝͠͠͝͝͝͝͝͝͝͠͠͝͝p̷̨̨̢̢̢̡̡̧̢̧̢̢̢̡̡̨̨̢̡̨̢̨̢̧̛̛͇̼̮̜͔̞̟̟͔̻͓̺̯̞̥͎̺͓̟̘̳̪͎̦̠̘̱̺̮̩̪̺̠͎̩̺͚̣͓̳̤̘̜͖͙̗̹̥͕̮̟̝͕̥̜̫͉͈̺̼̙͙̣̩̝̥͇͓̳͉̣̜͍̬̥̤͇̩͕̭̼̱̰̰̣̙̩̤͙̰̥͖͎̠͔̘̜̣̜͖̼̞̠͓̝̤̳͚͔̜͙͔͎̲̦̯͖̟̭͓̯͙̣̣̲̹͔̹̮̳̦̱̤͚͔͓̻̥̤̱͉̰͈̞͓̫̙͓̦͚̦̗̟̙͖̲͈̙̝͓͉̩̲̼̖͚̪̠̱̠̜̰̦̠͔̫̫̹͕̺̖͔̰̬̺̗͇̯̻̮̠͇̟͇̤͓̮̦͓̬̠̣̪͙̞̪̺̟̩̯͇̜̼͇̗̼̩̻̺̞̯̺̼̟̘̱̣̺͚̼̹͈͇̦͚͓̩̠̘͍̮͙̻̖̎̈́̍͆͌̈̋̌̓͆̂̾͛͗̈́̎̌̌́̎̾̑̒͐̈́̎̓̀̓̋̊̓̈͗̒̿̉̓̔̓̓̍̒̀̓̒̑͛̿̈́̎͌̉̑̊̌̀͗̾͌̚͘̚̚̚͘͜͜͜͜͜͜͜͜͜͜͠͠͝͝ͅͅ

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTB: Cheap Filco MJ2 TKL WTS: Red Aluminum 60% Case
« Reply #140 on: Sat, 06 October 2018, 15:57:27 »
somebody buy it, you know you want to

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red Aluminum 60% Case
« Reply #141 on: Sun, 14 October 2018, 12:45:41 »
bbbbbbbbbbbbb
uuuuuuuuuuuuuuu
mmmmmmmmmmm
pppppppppppppppppppp

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red Aluminum 60% Case
« Reply #142 on: Sat, 10 November 2018, 19:17:25 »
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red Aluminum 60% Case $35
« Reply #143 on: Wed, 28 November 2018, 15:08:11 »
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Red Aluminum 60% Case $55 SHIPPED
« Reply #144 on: Sat, 08 December 2018, 14:58:29 »
a

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
-
« Reply #145 on: Sun, 09 December 2018, 14:27:57 »
-
« Last Edit: Wed, 19 December 2018, 18:05:44 by HPE1000 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Bump

Offline weaston

  • Trade Count: (0)
  • Posts: 9
Pming

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Whitefox Aria, Cherry G84-4101SPAUS, Zhuque Blue, Red Alu 60% Case
« Reply #148 on: Thu, 27 December 2018, 13:21:47 »
KPAD gone, sorry for those who missed it

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: WTS: Whitefox Aria, Cherry G84-4101SPAUS, Red Alu 60% Case
« Reply #149 on: Tue, 01 January 2019, 17:31:14 »
bump


proof for dreamer
« Last Edit: Wed, 02 January 2019, 11:54:37 by HPE1000 »

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
updated some stuff, added some things, too many things pls buy lmao

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
A few things sold, lowered prices quite a bit on everything. If you make an offer tonight I might be more willing to go a bit lower :)

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] Walnut 60% Case, Whitefox Gatistotle, Custom Pok3r, G84 Dyesub
« Reply #153 on: Wed, 09 January 2019, 10:28:14 »
price drop

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
updated tings

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] JD40(Green Tea,Wood Insert), Cherry G84-4101SPAUS
« Reply #155 on: Sun, 13 January 2019, 16:23:20 »
reeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] Cherry G84-4101SPAUS (Cherry ML)
« Reply #156 on: Tue, 15 January 2019, 16:18:51 »
JD40 Sold

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Ducky Shine 2/II TKL CHEAP, CAN BE BROKEN [WTS] Cherry G84-4101SPAUS
« Reply #157 on: Thu, 17 January 2019, 17:05:56 »
bamp

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTB] Ducky Shine 2 or 3 TKL (Cheap, Can be Broken!)
« Reply #158 on: Fri, 18 January 2019, 20:05:01 »
booOooooOooOoooOOOooOoOOooOooP

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] Stock Pok3r Case, Red Dolch Doubleshot Alps Keycaps
« Reply #159 on: Sat, 02 February 2019, 11:28:18 »
bop

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] Stock Pok3r Case, Red Dolch Doubleshot Alps Keycaps
« Reply #160 on: Sat, 02 February 2019, 11:34:08 »
red dolch alps caps gone

Online iKevinFtw

  • Trade Count: (0)
  • Posts: 84
  • Location: Providence, RI
  • Damn this is making me broke
Re: [WTS] Stock Pok3r Case
« Reply #161 on: Sat, 02 February 2019, 21:04:37 »
pmd
Anne Pro 2 w/ Gat Browns and an Alu case. The bluetooth is too good to pass up!

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] Custom White Aluminum QFR TKL, Stock Pok3r Case
« Reply #162 on: Mon, 04 February 2019, 12:34:08 »
 :llama:

Online ideus

  • * Exalted Elder
  • Trade Count: (0)
  • Posts: 7169
  • Location: In the middle of nowhere.
  • Björkö.
Re: [WTS] Stock Pok3r Case
« Reply #163 on: Tue, 05 February 2019, 11:00:33 »
PM'ed on the Poker case.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] Filco MJ2 w/ Gateron Reds
« Reply #164 on: Sat, 09 February 2019, 11:19:47 »
 :confused:

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS/T] Artisans, IBM 6113442, Poker 2 Case, Green Backlit Caps
« Reply #165 on: Sun, 10 February 2019, 16:02:49 »
added artisans

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS/T] Artisans, IBM 6113442, Poker 2 Case, Green Backlit Caps [WTTF] ETF SOX
« Reply #166 on: Mon, 11 February 2019, 16:13:57 »
Bump

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] Ramage Wood Esc Key, IBM 6113442, Poker 2 Case, Green Backlit Caps
« Reply #167 on: Wed, 13 February 2019, 18:00:41 »
bump

going to revisit trading/selling artisans this weekend. would like to get some of this other stuff sold lol.

Offline HPE1000

  • Keycap Paparazzo
  • Trade Count: (0)
  • Thread Starter
  • Posts: 2785
  • Location: Carolina Beach, NC
Re: [WTS] HKP Bloodsplat (Topre), Stock Poker 2 Case, Green on White Backlit Caps
« Reply #168 on: Sat, 16 February 2019, 15:10:22 »
bump