[IC] CF-LX Ultra-light Carbon Fiber 60% Case

[hwood34]

DrHubblePhD

Interest Form

Specs:
- 1.5mm Carbon Fiber
- Skeleton style case (top/plate, bottom, standoffs in middle)
- Universally compatible plate

More renders:

More

Joey Quinn

[Ripudio]

I might be interested depending on the details. Can it be made so that switches are removable?

What about making a poker compatible plate out of CF?

[hwood34]

I might be interested depending on the details. Can it be made so that switches are removable?

What about making a poker compatible plate out of CF?

Yep, one of the options on the IC form is for a notched switchplate. And the top would be compatible with a Poker, though I'm not offering just plates at this time

[Ripudio]

Woops, didn't see the form. Thanks!

[iamtootallforthis]

Filled out the form.

[ideus]

It would be clear to call the project "CF60% carbon fiber plates set". These are not "a case".

[hwood34]

It would be clear to call the project "CF60% carbon fiber plates set". These are not "a case".

These are "a case":

This is an interest check for a 60% case made out of carbon fiber, a durable and light material. The case will fit all standard 60% PCBs. It will consist of a top layer, also acting as the switchplate, and a bottom layer. In between the two will be spacers, similar to the JD40 case

[Melvang]

It is still a case, albeit skeleton style but still a case.  If you haven't looked at manufacturing methods yet I would recommend waterjet, I am not sure if CF can be laser cut.  Even if it can I would venture to guess it gives off toxic fumes similar to acrylic when laser cut.  Also, from other materials I have seen both laser and waterjet cut, I much prefer the edge quality of the waterjet.  However, the roughness on the cut edge of laser cut plates greatly adds to the ability for the switch to grab a hold of the plate.

[nubbinator]

Carbon fiber burns by laser.  And will the carbon fiber have a core material it's built up around?  If you want to do some prototypes, I may be able to get my cousin to prototype since I know he has access to a waterjet at his work and has offered to do some stuff when he visited in September or October.

[heedpantsnow]

I'm in. My full CF case project hit some snags

[hwood34]

Yeah, I found a place that does waterjet machining for the carbon fiber

Carbon fiber burns by laser.  And will the carbon fiber have a core material it's built up around?  If you want to do some prototypes, I may be able to get my cousin to prototype since I know he has access to a waterjet at his work and has offered to do some stuff when he visited in September or October.

Hmm, that sounds pretty cool. PM'd

[CPTBadAss]

Could you clarify how this is going to be made? Are you making a skeleton style case like the ones JD made and then using waterjet to cut out the switch holes?

So the carbon fiber will be made into two solid plates then cut after it's formed and solidified right? Because as is, cutting a sheet of carbon fiber with waterjet would be monumental overkill.

[hwood34]

Could you clarify how this is going to be made? Are you making a skeleton style case like the ones JD made and then using waterjet to cut out the switch holes?

So the carbon fiber will be made into two solid plates then cut after it's formed and solidified right? Because as is, cutting a sheet of carbon fiber with waterjet would be monumental overkill.

Pretty much yeah. I'm gonna sit down with swill's tool to make a CAD file to get a better price estimate

[hwood34]

anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better

[Joey Quinn]

anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better

Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.

[hwood34]

anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better

Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.

I've had some issues with it, if it wouldn't be a problem that'd be awesome

[Joey Quinn]

anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better

Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.

I've had some issues with it, if it wouldn't be a problem that'd be awesome

Ok, I'll work on it tonight, what layout options do you want?

[hwood34]

anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better

Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.

I've had some issues with it, if it wouldn't be a problem that'd be awesome

Ok, I'll work on it tonight, what layout options do you want?

Any way it could be one of the ANSI/ISO multi compatible layouts?

[Joey Quinn]

anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better

Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.

I've had some issues with it, if it wouldn't be a problem that'd be awesome

Ok, I'll work on it tonight, what layout options do you want?

Any way it could be one of the ANSI/ISO multi compatible layouts?

Probably, just to be clear, am I making a JD style case or the bent infinity case?

[hwood34]

anyone got the files for a 60% layout plate I could use for this? A full skeleton case would be even better

Swill's plate maker would probably work, if you want something else I could probably make one tomorrow if I finish my research paper early.

I've had some issues with it, if it wouldn't be a problem that'd be awesome

Ok, I'll work on it tonight, what layout options do you want?

Any way it could be one of the ANSI/ISO multi compatible layouts?

Probably, just to be clear, am I making a JD style case or the bent infinity case?

the JD style

[Joey Quinn]

the JD style

Any idea what size you want the bezel to be?

[Joey Quinn]

For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.

[hwood34]

(Attachment Link)

For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.

That should work. I'm looking for it to be a pretty small, lighter case

[Joey Quinn]

(Attachment Link)

For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.

That should work. I'm looking for it to be a pretty small, lighter case

The only thing that restricts the bezel size is the size of the bezel on the pcb, if you make the plate too small the standoffs will hit the pcb.

[hwood34]

(Attachment Link)

For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.

That should work. I'm looking for it to be a pretty small, lighter case

The only thing that restricts the bezel size is the size of the bezel on the pcb, if you make the plate too small the standoffs will hit the pcb.

So then what would be the smallest bezel that would work with a standard 60% PCB i.e. Poker II

[Joey Quinn]

(Attachment Link)

For reference this is a 1cm bezel, not sure what the JD40 is but I think it's a bit larger.

That should work. I'm looking for it to be a pretty small, lighter case

The only thing that restricts the bezel size is the size of the bezel on the pcb, if you make the plate too small the standoffs will hit the pcb.

So then what would be the smallest bezel that would work with a standard 60% PCB i.e. Poker II

No clue, I actually just sold mine, this could be answered very easily if someone is willing to make a measurement for me. I need the distance from the center of the mx switch to the edge of the pcb. I need x, someone my know it. If no one knows or measures it I'll just use the dimensions of the GH60 because I already have those files.

[hwood34]

So the GH60 measurements should be fine

[Joey Quinn]

So the GH60 measurements should be fine

Sounds good.

[Ngt]

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

[Ngt]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

[hwood34]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

[Ngt]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

[hwood34]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

[Ngt]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

Fair enough. How many entries do you have so far in IC?

[hwood34]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

Fair enough. How many entries do you have so far in IC?

about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB orders

[cmadrid]

Never any TKL cases >_<

[Ngt]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

Fair enough. How many entries do you have so far in IC?

about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB orders

I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?

[hwood34]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

Fair enough. How many entries do you have so far in IC?

about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB orders

I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?

Well, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.

[hwood34]

Never any TKL cases >_<

Depending on when this finishes up, whether it works or not, I'll look into doing a TKL case

[Ngt]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

Fair enough. How many entries do you have so far in IC?

about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB orders

I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?

Well, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.

Fair enough. Have you tried to see how much it would be with just a standard 60% CAD file even though it might not be the final CAD file?

[hwood34]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

Fair enough. How many entries do you have so far in IC?

about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB orders

I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?

Well, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.

Fair enough. Have you tried to see how much it would be with just a standard 60% CAD file even though it might not be the final CAD file?

Well, since all the files I found lacked plates, I just got an estimate for one of those and added a decent amount to it since all the small adjustments involved in making plates can add up quickly

[Ngt]

I submitted. I'm definitely interested in this. I'm curious to know what companies you need to contact for that to be real. I mean which manufacturers, providers and so on.

I'll be using Big Blue Saw for waterjetting

the JD style

Any idea what size you want the bezel to be?

I didn't get what the bezel is. Is it the thickness of the plate?

The width of the plate that extends past the PCB on the sides and top

Ok thanks. Do they provide the CF too?


Thanks. I think it could be added to the GH glossary .

I'm not actually sure. It seems like they do though

Fair enough. How many entries do you have so far in IC?

about 45. But that might go up once I get a more definite price and stance on this whole thing. And IC numbers are usually a good deal lower than actual GB orders

I guess you needed the IC numbers to contact the manufacturers and tell them at least how many you'll be interested for. Am I right? If yes, when do you plan on contacting them for that more precise price information?

Well, once I get the CAD files for the case, they have an auto price estimator on their website. If I get a little more interest, I'll start up the buy. But that all depends on what the actual price ends up being.

Fair enough. Have you tried to see how much it would be with just a standard 60% CAD file even though it might not be the final CAD file?

Well, since all the files I found lacked plates, I just got an estimate for one of those and added a decent amount to it since all the small adjustments involved in making plates can add up quickly

I think I might not be sure that I understood what a CAD file is. Isn't the file that describe the structure of the plate?


Oh that's where the $50-80 price range comes from?

[hwood34]

Yep

[Ngt]

Yep

So if the CAD is the file that describes the plate, how could you find such files lacking the plate?

[heedpantsnow]

Could you post a list of those interested?  I can't remember if I already signed up.

[Ngt]

Could you post a list of those interested?  I can't remember if I already signed up.

He could just tell you if you are in the list rather than naming everybody.

[heedpantsnow]

Could you post a list of those interested?  I can't remember if I already signed up.

He could just tell you if you are in the list rather than naming everybody.

Or that

[hwood34]

Could you post a list of those interested?  I can't remember if I already signed up.

He could just tell you if you are in the list rather than naming everybody.

Or that

I actually forgot to include a username field in the form

[ideus]

Just filled the form. Will the plate fit both, the Poker X and the Infinity keyboard? I require both.

[hwood34]

Just filled the form. Will the plate fit both, the Poker X and the Infinity keyboard? I require both.

Poker, yes. Infinity, doubt it, has the different layout problem