Tex 60% Case w/ feet?

[awhitedev]

I was looking to buy one of your Tex 60% cases. Do these come with aluminum feet? If not, are there any options for a 60% case that is slightly elevated?

[00zeRO]

I was looking to buy one of your Tex 60% cases. Do these come with aluminum feet? If not, are there any options for a 60% case that is slightly elevated?

No aluminum feet. They come with 4 large Rubber feet, and 6 small Rubber feet.

[drewba]

I was looking to buy one of your Tex 60% cases. Do these come with aluminum feet? If not, are there any options for a 60% case that is slightly elevated?

No aluminum feet. They come with 4 large Rubber feet, and 6 small Rubber feet.

Came here to find an answer to this question. Just ordered one, thanks!

[PunksDead]

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

[00zeRO]

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow... :thumb:

[drewba]

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow...

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.

[Cotay]

So what are the chances that the purple Tex 60% case is ever coming back in stock?

[00zeRO]

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow...

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.

Show Image

This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

[drewba]

More

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow...

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.

Show Image

This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

[Cotay]

More

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow...

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.

Show Image

This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

Maybe I'll get a response in 2 years.  ;D

[00zeRO]

More

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow...

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.

Show Image

This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

Gah...good gravy. So very sorry for that...not sure how we missed seeing the new response after two years...

[00zeRO]

So what are the chances that the purple Tex 60% case is ever coming back in stock?

Not sure of the chances...we are still waiting for production. I'd imagine it will be a good chance, though we won't likely stock many of them.

[drewba]

More

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

hey dudes, i just had a quick question about the tex cases.

i have a bronze and black...

the bronze tex case seems to have an opening for dipswitches fitted for pokers

while the black tex case fully exposes the v60 dips,

which models do you guys currently have in stock?

Show Image

That is a great question. To our knowledge, the screws are in the wrong spot on the current batch to fit a V60 without some sort of modification. Sight unseen, since I am at home away from the office until tomorrow, I will have to say that they fit the smaller 4 DIP layout of the Poker II. I will know better once I get to the office tomorrow...

Hoping this is helpful - I received my tex today from mechanicalkeyboards.com and it definitely came with the larger rectangular opening for the dips.

Show Image

This larger hole is to accommodate larger DIP switch banks. Many newer keyboards have 6 instead of 4.

I appreciate the follow up 2 years later  ;D :p

Gah...good gravy. So very sorry for that...not sure how we missed seeing the new response after two years...

I was just goofing around. I purchased the TEX case from you guys awhile back and very happy with it!  :thumb: