I'd like to know what Control Mode, Key lock, Push lock, Change lock, LED bypass, etc. does
I've been reading this translated text over and over too and trying to understand:
Maximum brightness automatic control of the switch LED and RGB LED
In the 500mA of USB 2.0 switch with LED status lights, effects, conditions, and automatically controlling the brightness of the colors of the RGB
If the switch LED except for the bypass mode and multi-LED disabled
It can affect the brightness of RGB when the bypass mode. (Full LED OFF switch at the maximum, full ON, minimum brightness)
Bypass mode only affects switch LED mode.
The maximum power setting
LED as the ability to set the maximum current value available in the (RGB included),
All responsibility for the operation and fault when setting its functions are attributed to your own.
For a USB output current of the devices used (PC, etc.), if you only set generous.
Example) lights up the entire bypass switch LED (LED multi-use) to secure an RGB LED brightness in the state.
> Setting
After entering control mode,
SCM Enter, enter,
Pressing a number from 500 to 900 slowly (base 500)
Control mode, press (Save)
Control mode is exited with ESC
Using the event of default after reset operational errors or dead 500
Keyboard LED LED Down key and then press the Stop recognized
After changing power settings
