Author Topic: Thumb vs finger operated trackball  (Read 48261 times)

0 Members and 1 Guest are viewing this topic.

Offline knightjp

  • Thread Starter
  • Posts: 116
Thumb vs finger operated trackball
« on: Sun, 06 September 2015, 14:07:01 »
I'm thinking of getting a trackball. No I don't game nor do I have any RSI, etc. I always believed that prevention is better than cure. So if getting a trackball is better than a mouse and those suffering with injuries, then obviously, getting one now would be better.

Of course I now cannot decide whether getting a thumb operated one is better than a finger operated one. Specifically the Logitech M570 vs The Kensington Orbit with scroll wheel.
« Last Edit: Tue, 28 June 2016, 03:58:06 by knightjp »

Offline kurplop

  • THE HERO WE DON'T DESERVE
  • Posts: 953
  • "Losing the digital battle one digit at a time."
Re: Thumb vs finger operated trackball
« Reply #1 on: Sun, 06 September 2015, 15:50:58 »
Welcome to the Geekhack forum.

I'm a finger man myself but it is a very individual thing. Also, I wouldn't assume that a trackball is better for you; it is for some but not for others.

I think that the first guiding principle for good ergonomics is that it is comfortable and that it feels right for you. It's best if you could try out several before you buy.

Offline Findecanor

  • Posts: 3821
  • Location: Stockholm, Sweden
  • Does not take bull****
Re: Thumb vs finger operated trackball
« Reply #2 on: Sun, 06 September 2015, 16:12:05 »
Welcome to Geekhack!

I find that the most important thing is the angle of the hand - that it is slanted and not flat on the desk. I have never taken a liking to trackballs myself, but I can see the value when you have multiple ways to position your hand.
Smoking is an act of violence. I defend myself.
Daily driver: Phantom (Lubed Cherry MX Clear, Lasered Cherry PBT keycaps with Row A. Plastic "Frankencase". Custom firmware, Swedish layout)

Offline kurplop

  • THE HERO WE DON'T DESERVE
  • Posts: 953
  • "Losing the digital battle one digit at a time."
Re: Thumb vs finger operated trackball
« Reply #3 on: Sun, 06 September 2015, 17:34:22 »
I agree entirely with your comment about the angle. It's critical that it be right. That was my major concern when I mounted mine between my split keyboard. I really liked the angle I set my Expert Mouse on an earlier keyboard tray.
110401-0


The one thing that I didn't anticipate when centering the ball on later keyboards is the benefit of being able to use alternate hands or both hands at the same time to reduce fatigue, especially during extended CAD sessions.
110402-1

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #4 on: Mon, 07 September 2015, 06:59:03 »
I suppose choosing one over the other is a very subjective thing. What works for one person, won't necessarily work for another. I just wondered if there was any advantage type had over the other.

I know that the finger operated one is ambidextrous. That means since I'm left handed, I would be able to use on my left hand. But I primarily mouse  with my right since I like using the keyboard shortcuts while I'm holding on to the mouse.

So having in ambidextrous would be advantageous if at any point I switch to the Dvorak layout. But for now, does not seem essential.

I know how many people say that the thumb operated one is extremely comfortable. However it seems to me that it would probably put a strain on the thumb over long hours of usage. I've never used one, so anyone who is currently using it would be able to comment on that.

What looks comfortable sometimes is not exactly the best for me in my experience. Used to type on Colemak. Everyone said that it would be easy to pick up and would be comfortable. It took me 2 years before I was able to type a single sentence properly and my fingers felt cramped. So I'm not sure about that.

Offline Tactile

  • Posts: 1047
  • Location: Portland, OR
Re: Thumb vs finger operated trackball
« Reply #5 on: Mon, 07 September 2015, 11:14:33 »
I have both types & for me the fine motor skill required by the thumb trackball is less comfortable (and I'm not as skilled at it) as the gross movement of a finger type trackball.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #6 on: Mon, 07 September 2015, 15:58:19 »
So far all the reviews & the posts on other threads that I've been reading seem to be mixed. I guess it comes down to preference and what works best for each individual. I like the what I read in the link below.

http://www.trackballmouse.org/top-10-trackball-mouse/

The only problem here is that I don't have a tech shop with display pieces of trackballs for me to try out.


« Last Edit: Mon, 07 September 2015, 17:23:42 by knightjp »

Offline snarfarlarkus

  • Posts: 159
Re: Thumb vs finger operated trackball
« Reply #7 on: Tue, 08 September 2015, 00:56:08 »
Thumb trackballs kind of strain my wrist... Is that just me?

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #8 on: Wed, 09 September 2015, 01:35:58 »
Thumb trackballs kind of strain my wrist... Is that just me?

I'm sure that its not just you. Pretty sure that there are those who use the finger operated ones just for that very reason.
From the reviews of the M570 that I've read online, quite a few claimed that they find it more comfortable than finger operated ones.

Opinions in between the two seem to be divided equally on which type is best. I guess that it all depends on what is best for each person really or where our preferences are.

Offline Snarfangel

  • Posts: 276
Re: Thumb vs finger operated trackball
« Reply #9 on: Wed, 09 September 2015, 14:47:20 »
So far all the reviews & the posts on other threads that I've been reading seem to be mixed. I guess it comes down to preference and what works best for each individual. I like the what I read in the link below.

http://www.trackballmouse.org/top-10-trackball-mouse/

The only problem here is that I don't have a tech shop with display pieces of trackballs for me to try out.





Of the trackballs I've used, I like the Kensington Slimblade and Expert, and the Logitech Trackman Marble FX (the latter only available used, pretty much, and in PS/2 format -- it's an old one, but I have two that still work perfectly). The two top-end Kensington ones are excellent, though, and available new, and the ball glides like a dream on either one (a little quieter on the Slimblade, I think, though that might just be mine).


Never did care much for thumb-operated trackballs, though that's more of a personal preference. You can really give the finger-operated ones a good spin.

Offline 0100010

  • Posts: 1122
  • Location: DFW, TX, US
  • Not Sure
Re: Thumb vs finger operated trackball
« Reply #10 on: Wed, 09 September 2015, 15:13:28 »
You need a trackball that can be operated by both your fingers AND your thumb.  Logitech Trackman FX

  Quoting me causes a posting error that you need to ignore.

Offline jerue

  • (Whenever that happens :P)
  • * Destiny Supporter
  • Posts: 1235
  • Location: SC
Re: Thumb vs finger operated trackball
« Reply #11 on: Fri, 11 September 2015, 13:29:58 »
FWIW, I don't like thumb trackballs. Fingerballs FTW.

Obtain a Microsoft Trackball Explorer, or a Logitech Trackman FX. Both of those are awesome, and I would argue that the MS Trackball Explorer is the best input device ever.

I'd also take a look at the CST2545-5W as you can also mod it and add two extra buttons, some users like to rig mechanical switches to them. Like this! (via /u/tylerbrainerd on r/mk)


Offline smknjoe

  • Posts: 862
  • Location: Tejas
  • I like tactile, clicky, switches.
Re: Thumb vs finger operated trackball
« Reply #12 on: Fri, 11 September 2015, 14:01:30 »
You need a trackball that can be operated by both your fingers AND your thumb.  Logitech Trackman FX

Show Image


That looks like it would be pretty comfortable.

Finger operated seems to be more popular, but I'm not a fan. The wrist motion is similar to a standard mouse. This is the most comfortable mouse I've ever used: http://www.amazon.com/Microsoft-TrackBall-Optical-PC-MAC/dp/B00005853X ...too bad they don't make them anymore.

As with keyboards, you need to try them out to see what you like best. Everyone is different.
SSKs for everyone!

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #13 on: Sat, 12 September 2015, 16:31:07 »
Finger operated seems to be more popular, but I'm not a fan. The wrist motion is similar to a standard mouse. This is the most comfortable mouse I've ever used: http://www.amazon.com/Microsoft-TrackBall-Optical-PC-MAC/dp/B00005853X ...too bad they don't make them anymore.

As with keyboards, you need to try them out to see what you like best. Everyone is different.

I'm not sure if anyone here watches the youtube show Tec syndicate. I remembered seeing an episode where they build a system linux for Eric S Raymond. I just watched it again and I'm not one to choose something just because someone famous uses it. But Eric was using a Logitech thumb operated trackball. I just thought that it was interesting to note.

Offline njbair

  • Posts: 2825
  • Location: Cleveland, Ohio
  • I love the Powerglove. It's so bad.
    • nickbair.net
Re: Thumb vs finger operated trackball
« Reply #14 on: Sat, 12 September 2015, 17:20:12 »
I'll chime in with a second endorsement for the CST L-TRAC. I also have the model with two expandable button ports, although I'm not currently using them.

It's a finger trackball, but sometimes I find myself sort of tenting my hand and using my thumb, it's not hard to do.

The other cool thing about the L-TRAC is that you can replace the ball with any 2-1/4" billiard ball.

Alpine Winter GB | My Personal TMK Firmware Repo
IBM Rubber Band "Floss" Mod | Click Modding Alps 101 | Flame-Polishing Cherry MX Stems
Review: hasu's USB to USB converter
My boards:
More
AEKII 60% | Alps64 HHKB | Ducky Shine 3, MX Blues | IBM Model M #1391401, Nov. 1990 | IBM SSK #1391472, Nov. 1987, screw modded, rubber-band modded | Noppoo EC108-Pro, 45g | Infinity 60% v2 Hacker, Matias Quiet Pros | Infinity 60% v2 Standard, MX Browns | Cherry G80-1800LPCEU-2, MX Blacks | Cherry G80-1813 (Dolch), MX Blues | Unicomp M-122, ANSI-modded | Unicomp M-122 (Unsaver mod in progress) | 2x Unitek K-258, White Alps | Apple boards (IIGS, AEKII) | Varmilo VA87MR, Gateron Blacks | Filco Zero TKL, Fukka White Alps | Planck, Gateron Browns | Monarch, click-modded Cream Alps

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #15 on: Sun, 13 September 2015, 03:39:48 »
The CST L-Trac does look cool. I just saw a video of someone using it. It looks OK.. but how does that compare with something like the Logitech M570?

Offline njbair

  • Posts: 2825
  • Location: Cleveland, Ohio
  • I love the Powerglove. It's so bad.
    • nickbair.net
Re: Thumb vs finger operated trackball
« Reply #16 on: Sun, 13 September 2015, 07:01:25 »
The CST L-Trac does look cool. I just saw a video of someone using it. It looks OK.. but how does that compare with something like the Logitech M570?
You must not have done a price comparison or you wouldn't have to ask!

The L in L-TRAC stands for Laser, whereas the Logitech is optical. It's wired, not wireless like the Logitech, but trackballs don't really move so I don't see the point of wireless in this case. It's probably twice as big as the Logitech.

And it costs like $100 more.

That said, it could be the last pointing device you'll ever buy. Unless you buy more L-TRACs.

Alpine Winter GB | My Personal TMK Firmware Repo
IBM Rubber Band "Floss" Mod | Click Modding Alps 101 | Flame-Polishing Cherry MX Stems
Review: hasu's USB to USB converter
My boards:
More
AEKII 60% | Alps64 HHKB | Ducky Shine 3, MX Blues | IBM Model M #1391401, Nov. 1990 | IBM SSK #1391472, Nov. 1987, screw modded, rubber-band modded | Noppoo EC108-Pro, 45g | Infinity 60% v2 Hacker, Matias Quiet Pros | Infinity 60% v2 Standard, MX Browns | Cherry G80-1800LPCEU-2, MX Blacks | Cherry G80-1813 (Dolch), MX Blues | Unicomp M-122, ANSI-modded | Unicomp M-122 (Unsaver mod in progress) | 2x Unitek K-258, White Alps | Apple boards (IIGS, AEKII) | Varmilo VA87MR, Gateron Blacks | Filco Zero TKL, Fukka White Alps | Planck, Gateron Browns | Monarch, click-modded Cream Alps

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #17 on: Tue, 15 September 2015, 02:28:13 »
Having a look through the L-Trac site. I will say that I'm not impressed  by the overall design of the L-Trac. It seems like the scroll wheel was an after-thought. However what is impressive is the glowing trackball - nice feature.

However, even though I'm reading through the material, I cannot figure out what is the difference in between the CST2545-5W(GL) & CST2545W(GL)..

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #18 on: Sun, 27 September 2015, 11:57:31 »
I got myself a Logitech M570 today.
I tried looking for the L-Trac and the Kensington Orbit, but apparently, they don't come here in Dubai. If I do need them, I would have to order online and wait about a month of delivery.

Nevertheless, I'm enjoying the Logitech. Like the reviews state, it is quite comfortable to use. I'm slow at this point and I do feel that there is a loss on speed. Probably due to the learning curve, since this is my first trackball. For the moment I'm enjoying the comfort. :)

Offline njbair

  • Posts: 2825
  • Location: Cleveland, Ohio
  • I love the Powerglove. It's so bad.
    • nickbair.net
Re: Thumb vs finger operated trackball
« Reply #19 on: Sun, 27 September 2015, 13:01:59 »
I got myself a Logitech M570 today.
I tried looking for the L-Trac and the Kensington Orbit, but apparently, they don't come here in Dubai. If I do need them, I would have to order online and wait about a month of delivery.

Nevertheless, I'm enjoying the Logitech. Like the reviews state, it is quite comfortable to use. I'm slow at this point and I do feel that there is a loss on speed. Probably due to the learning curve, since this is my first trackball. For the moment I'm enjoying the comfort. :)
You will learn to "fling" the ball to quickly move across the screen. At that point you move less than with a mouse, since the ball's momentum is doing the work for you.

Alpine Winter GB | My Personal TMK Firmware Repo
IBM Rubber Band "Floss" Mod | Click Modding Alps 101 | Flame-Polishing Cherry MX Stems
Review: hasu's USB to USB converter
My boards:
More
AEKII 60% | Alps64 HHKB | Ducky Shine 3, MX Blues | IBM Model M #1391401, Nov. 1990 | IBM SSK #1391472, Nov. 1987, screw modded, rubber-band modded | Noppoo EC108-Pro, 45g | Infinity 60% v2 Hacker, Matias Quiet Pros | Infinity 60% v2 Standard, MX Browns | Cherry G80-1800LPCEU-2, MX Blacks | Cherry G80-1813 (Dolch), MX Blues | Unicomp M-122, ANSI-modded | Unicomp M-122 (Unsaver mod in progress) | 2x Unitek K-258, White Alps | Apple boards (IIGS, AEKII) | Varmilo VA87MR, Gateron Blacks | Filco Zero TKL, Fukka White Alps | Planck, Gateron Browns | Monarch, click-modded Cream Alps

Offline SamirD

  • * Esteemed Elder
  • Posts: 1485
  • Location: HSV and CHI
  • on Buckling Springs since '88
    • http://www.huntsvillecarscene.com
Re: Thumb vs finger operated trackball
« Reply #20 on: Mon, 28 September 2015, 23:09:34 »
Finger operated seems to be more popular, but I'm not a fan. The wrist motion is similar to a standard mouse.
I own both a Logitech thumb and finger model and this makes sense as my hand hurts with extended use on the finger model.  Thumb model--well I've been sitting at this one for 11hrs now and still no pain.
I have both types & for me the fine motor skill required by the thumb trackball is less comfortable (and I'm not as skilled at it) as the gross movement of a finger type trackball.
It definitely takes some getting used to since the thumb is small and is missing a joint compared to the fingers.  But that being said, once you do get used to it, you're moving and straining less.
I know how many people say that the thumb operated one is extremely comfortable. However it seems to me that it would probably put a strain on the thumb over long hours of usage. I've never used one, so anyone who is currently using it would be able to comment on that.
Been using it for 11hrs now and thumb feel 100% normal and unstrained.  I don't mouse a lot, but I do need it about every 20-30 seconds.  I work at least 8hrs a day every day and have been for over 2 years now on my current IBM M and Logitech trackman setup with the same desk and chair, monitors, everything.  I get terribly sleepy or hungry before my hands hurt--haven't figured out how to permanently solve those two problems yet.  :))
I got myself a Logitech M570 today.
I tried looking for the L-Trac and the Kensington Orbit, but apparently, they don't come here in Dubai. If I do need them, I would have to order online and wait about a month of delivery.

Nevertheless, I'm enjoying the Logitech. Like the reviews state, it is quite comfortable to use. I'm slow at this point and I do feel that there is a loss on speed. Probably due to the learning curve, since this is my first trackball. For the moment I'm enjoying the comfort. :)
You'll find it fairly comfortable if you're used to a traditional mouse.  In fact, you may even try to move it every so often before remembering to use your thumb.  It takes time to set in, so don't worry.
You will learn to "fling" the ball to quickly move across the screen. At that point you move less than with a mouse, since the ball's momentum is doing the work for you.
Yes, totally awesome advice!  I use this all the time.  And when it doesn't fling as quickly, time to clean the ball pads and/or the ball.  Flinging is awesome.  I fly across a 2048x1536 screen with ease, and much less strain than a mouse.

Offline davkol

  • Posts: 4993
Re: Thumb vs finger operated trackball
« Reply #21 on: Wed, 30 September 2015, 13:04:42 »
Statistically, the kind of motion required by thumb trackballs is a tendon killerÖ and most fingertip trackballs don't really promote a good wrist posture. Unfortunately, I'm unaware of anything done right, but the discontinued Microsoft Trackball Explorer. In the end, it boils down to personal "durability" or consciously avoiding some habits (like resting an extended wrist).

Offline SamirD

  • * Esteemed Elder
  • Posts: 1485
  • Location: HSV and CHI
  • on Buckling Springs since '88
    • http://www.huntsvillecarscene.com
Re: Thumb vs finger operated trackball
« Reply #22 on: Wed, 30 September 2015, 14:39:04 »
Statistically, the kind of motion required by thumb trackballs is a tendon killerÖ and most fingertip trackballs don't really promote a good wrist posture. Unfortunately, I'm unaware of anything done right, but the discontinued Microsoft Trackball Explorer. In the end, it boils down to personal "durability" or consciously avoiding some habits (like resting an extended wrist).
Interesting.  I was just watching my thumb and hand as it was using my logitech and essentially only the two thumb joints were moving.  How is that bad?

It's interesting that there's such a following behind some trackballs like the Logitech and MS one.  I didn't even know about the MS one, but now I'm wanting one like other keyboards just to see how good they are.  I think I'm evolving into a connoisseur of input devices, lol.


Offline kurplop

  • THE HERO WE DON'T DESERVE
  • Posts: 953
  • "Losing the digital battle one digit at a time."
Re: Thumb vs finger operated trackball
« Reply #23 on: Wed, 30 September 2015, 18:07:20 »
As much as I personally need a finely tailored keyboard/trackball set up, I would suggest that you be careful not to be drawn into thinking that there's something out there that is going to be greatly superior to what you have if what you are using is already comfortable. Years ago when I first was taught how to touch type, I knew that the straight rows would not work with my physiology. I didn't know that there were options but years later when I first saw a split board, I knew that was what I needed. The same thing is true with the excessive pronation needed with a standard mouse.

My point is that most people don't need anything with the word ergonomic in front of it. If and when they do, their body will let them know, loud and clear, before any irreversible damage is done. What will you then need? Probably not the latest ergo studies or experts to tell you; just a little common  sense and exposure to what is available out there. What feels comfortable is probably your best guide to what is best for you. If you like the feel of the 570, you probably have your answer.

Offline SamirD

  • * Esteemed Elder
  • Posts: 1485
  • Location: HSV and CHI
  • on Buckling Springs since '88
    • http://www.huntsvillecarscene.com
Re: Thumb vs finger operated trackball
« Reply #24 on: Wed, 30 September 2015, 23:27:26 »
Very good points.  Although I never really searched for the best trackball for me.  The wired Logitech was the cheapest that walmart had at the time.  Little did I know it was the one that has a cult following today.  I got lucky on the second one I bought--got it for $3 because the ball was missing.  And since they have a lifetime warranty, Logitech sent me a new ball for free.

Hence it would probably be a bit prudent of me to check out what else is out there, very much like I need to try different keyboards, before I decide these are 'it' for me.  Although, I've been lucky enough that I've landed by default on some very good choices and honestly don't think they'll change to anything different.  I sometimes get lucky like that, but very seldom.

Offline KaminKevCrew

  • Posts: 555
  • Location: Tacoma, Washington
Re: Thumb vs finger operated trackball
« Reply #25 on: Wed, 30 September 2015, 23:30:18 »
I got myself a Logitech M570 today.
I tried looking for the L-Trac and the Kensington Orbit, but apparently, they don't come here in Dubai. If I do need them, I would have to order online and wait about a month of delivery.

Nevertheless, I'm enjoying the Logitech. Like the reviews state, it is quite comfortable to use. I'm slow at this point and I do feel that there is a loss on speed. Probably due to the learning curve, since this is my first trackball. For the moment I'm enjoying the comfort. :)
You will learn to "fling" the ball to quickly move across the screen. At that point you move less than with a mouse, since the ball's momentum is doing the work for you.
That's the issue I have with my optical Kensington. If I flick the ball too fast, the sensor can't keep up, and the cursor kinda hovers in one spot on screen. Opto-mechanical for the win! (a friend of mine has an old Kensington Turbo, and you can flick it as fast as you like.)

Offline SamirD

  • * Esteemed Elder
  • Posts: 1485
  • Location: HSV and CHI
  • on Buckling Springs since '88
    • http://www.huntsvillecarscene.com
Re: Thumb vs finger operated trackball
« Reply #26 on: Thu, 01 October 2015, 12:09:09 »
That's the issue I have with my optical Kensington. If I flick the ball too fast, the sensor can't keep up, and the cursor kinda hovers in one spot on screen. Opto-mechanical for the win! (a friend of mine has an old Kensington Turbo, and you can flick it as fast as you like.)
Interesting.  The Logitech I have is optical too I believe.  I guess it's a vastly different design because I've never had that happen.


Offline mrgoldenzombie

  • Posts: 47
  • Location: Ohio
  • Topre is cool I guess....
Re: Thumb vs finger operated trackball
« Reply #27 on: Mon, 26 October 2015, 22:34:20 »
I'm a finger man myself  :cool:
O-Ringed Black RealForce 87u  | O-Ringed Novatouch with Miami PBT

Offline captain

  • Posts: 693
Re: Thumb vs finger operated trackball
« Reply #28 on: Mon, 16 May 2016, 09:54:18 »
If anyone is still on the fence, this may be the time to get off...especially if you're a "finger man"!  ;-p

Massdrop has the CST-Laser Trackballs at some excellent prices.

If you want to give me referral credit for saving you $50, I'd be grateful if you'd use this link:  https://www.massdrop.com/r/3FDYVX  ;-)  The trackballs are here: https://www.massdrop.com/buy/cst-laser-trackballs

For further trackball wisdom, study from the master: hunt down ripster's trackball wiki faq.  He has the best trackballs I've ever seen!

In the mean time, here's a decent review of the non-backlit CST-L L-Track and Kensington Slimblade: 
« Last Edit: Mon, 16 May 2016, 11:29:25 by captain »
Welcome to geekhack -- where we like to type -- but don't care so much about reading.

Offline Marizen

  • Posts: 76
  • Location: Central California
Re: Thumb vs finger operated trackball
« Reply #29 on: Thu, 19 May 2016, 11:55:49 »
I like fingering more. There's just more control.

I use a Kensington Expert. I've tried the Trackman Marble and it was alright, but felt cheap in comparison (which makes sense because of the price difference). I will own a Slimblade and L-Trac Glow one day, but I don't have any desire to spend the money right now. I'm kind of skeptical of the Slimblade because it doesn't have separated buttons, so I'm worried there will be some plastic bend before actuating the switch.

I also have an M570 and it's alright, but I don't like using my thumb and I don't like how small the ball is. The scroll wheel sucks too.
« Last Edit: Thu, 19 May 2016, 20:22:20 by Marizen »

Offline Leslieann

  • * Elevated Elder
  • Posts: 2048
Re: Thumb vs finger operated trackball
« Reply #30 on: Thu, 19 May 2016, 17:17:12 »
I've had both.
Thumb is fine for browsing, but beyond that, finger is better, this is especially true if you are doing Cad, Photoshop or video editing, anything requiring straight lines. This isn't to say it can't be done, people do it, but others and myself have found we can work faster using fingers in those circumstances. Personally, if I got another (I've considered it) it would be finger and use a mouse along with it.

If you have tendonitis or arthritis in your thumb, do not use a thumb trackball, on the other hand, if you have carpal tunnel in your wrist, a thumb one can be fantastic. I have tendonitis in my thumb and cannot use thumb for long periods, my mother has carpal tunnel and needs a thumb trackball in order to use her computer for more than an hour.

I agree with the earlier statement, wireless is pointless unless you use it with a laptop (same with keyboards), since they don't get pushed around the desk.
Filco MJ2 L.E. w/Vortex case, hand milled case, custom feet, custom paint, Klaxxon key caps, lubed and o-ringed Jailhouse Blues made from vintage Cherry MX Blues, HID Liberator, stainless steel universal plate, 3d printed adapters, removable cord, sound dampened. Winkey blockoff plate | Magicforce 68 w/Outemu Blues |KBT Race S L.E. w/Ergo-Clears, custom WASD keyset | Das Pro w/browns (Costar model) | IBM Model M (x2)

Offline Marizen

  • Posts: 76
  • Location: Central California
Re: Thumb vs finger operated trackball
« Reply #31 on: Thu, 19 May 2016, 20:21:25 »
I agree with the earlier statement, wireless is pointless unless you use it with a laptop (same with keyboards), since they don't get pushed around the desk.

I could see how wireless would be desirable. It can definitely help reduce clutter. In terms of pure functionality, sure, it's kind of pointless unless you're mobile. But I also appreciate that my trackball isn't adding more wires to my desk  when I already have a keyboard, mouse, headset, wireless adapter, laptop and charger, xbox, 2 large speakers, a large amp, external hdd, a couple miscellaneous charging cables, and two monitors.

Of course, a lot of the clutter could be remedied by me getting a larger and more organizable desk. I'm currently using a $30 fold-up table form Costco.
« Last Edit: Thu, 19 May 2016, 20:32:25 by Marizen »

Offline csmertx

  • proprietor of waffles
  • * Elevated Elder
  • Posts: 2292
  • Location: USA
    • https://csmertx.gitlab.io
Re: Thumb vs finger operated trackball
« Reply #32 on: Sun, 22 May 2016, 22:59:10 »
I've jammed my wrists so many times throughout the years that they just won't move they way I want them too. I have to either use mice at ridiculously high dpi or use a trackball. So far I've used the trackman marble mouse (wired cheapie) and it served me well for the first year. I guess Chinese Omrons don't last as long as the Japanese variety. I use my fingertips for all input devices so fingertip mice make sense to me. I don't like the L-Trac's shape but it has the best dpi afaik. I'm really not a fan of the small trackball in the marble mouse; I can't use it to do any sort of task that requires pinpoint accuracy aside from FPS/RPG gaming stuff. I've tried to use it with some basic 3D modeling and it was not as smooth as mouse operations (my mouse even has acceleration lol). L-Trac would be my first choice but not the newer model. I would prefer the discontinued 3,200 CPI L-TracX model because I've become accustomed to 3,200 - 8,000 cpi/dpi.
   

Offline esr

  • Posts: 10
  • Location: Malvern, PA, USA
  • Yes, *that* ESR. It's what they always ask.
    • Home page
Re: Thumb vs finger operated trackball
« Reply #33 on: Fri, 03 June 2016, 12:10:36 »
I'm not sure if anyone here watches the youtube show Tec syndicate. I remembered seeing an episode where they build a system linux for Eric S Raymond. I just watched it again and I'm not one to choose something just because someone famous uses it. But Eric was using a Logitech thumb operated trackball. I just thought that it was interesting to note.

Confirmed, that was me using a Logitech T-CH11, the original Logitech optical trackball with three buttons.  In my opinion the best pointing device ever, and a great improvement over its successors.

You can read about my Frankenball, a T-CH11 mated with the guts of a Sanoxy active PS/2-to-USB adapter, here:

http://www.catb.org/esr/trackman-conversion/

We're still refining the build; seems the little microboard in the Danoxy has trouble driving signal over a six-foot USB cable.  Any recommendations for low-resistance USB cables would be welcome.
Unicomp EnduraPro Ultra Classic

Offline TheVengeance

  • Posts: 74
Re: Thumb vs finger operated trackball
« Reply #34 on: Fri, 03 June 2016, 13:05:54 »
I agree entirely with your comment about the angle. It's critical that it be right. That was my major concern when I mounted mine between my split keyboard. I really liked the angle I set my Expert Mouse on an earlier keyboard tray.
(Attachment Link)

The one thing that I didn't anticipate when centering the ball on later keyboards is the benefit of being able to use alternate hands or both hands at the same time to reduce fatigue, especially during extended CAD sessions.
(Attachment Link)

Whoa, what is the one at the bottom? Is that an adapted Ergodox?

Offline kurplop

  • THE HERO WE DON'T DESERVE
  • Posts: 953
  • "Losing the digital battle one digit at a time."
Re: Thumb vs finger operated trackball
« Reply #35 on: Fri, 03 June 2016, 19:55:00 »
I agree entirely with your comment about the angle. It's critical that it be right. That was my major concern when I mounted mine between my split keyboard. I really liked the angle I set my Expert Mouse on an earlier keyboard tray.
(Attachment Link)

The one thing that I didn't anticipate when centering the ball on later keyboards is the benefit of being able to use alternate hands or both hands at the same time to reduce fatigue, especially during extended CAD sessions.
(Attachment Link)

Whoa, what is the one at the bottom? Is that an adapted Ergodox?

The design was inspired by the ErgoDox but it is rumored to be the love child of a Slimblade and an Atreus.   https://flic.kr/s/aHsk9S87aK

Offline AKmalamute

  • HHKB Scrub
  • Posts: 826
  • Location: Western WA, USA
Re: Thumb vs finger operated trackball
« Reply #36 on: Fri, 03 June 2016, 20:28:26 »
Somebody was going to custom build an L-Trac lookalike using high-value rollers and a billiard ball. I commented on how you could tip it a bit to make a thumb trackball but got ignored.

Has anybody seen the files for that? I'd kinda like to play with making my own as everything in that project resonated with me ... except the orientation of the surface; I have tried finger-balls before and they make my hand hurt. Thumb trackballs, I maintain, are amazing.

HHKB-lite2, Dvorak user

Offline FoxWolf1

  • Posts: 838
  • 154
Re: Thumb vs finger operated trackball
« Reply #37 on: Fri, 03 June 2016, 20:34:37 »
Thumb ball users, how's cursor stability on a thumb ball during energetic spam-clicking while simultaneously moving the ball (or at least not lifting your finger off of it)?

I find that, with my CST, it's fine for slow-paced uses, since you can click gently, lift your fingers off the ball when clicking, or both-- but when playing some kinds of games, neither of these is an option, and the cursor winds up jumping around a lot. I was wondering if the ergonomics of a thumb-ball might be better in this regard. I didn't consider them at first, since my thumbs don't have great dexterity (how the hell do people use game controllers, anyway?), but maybe they'd suit me a bit better anyway...
Oberhofer Model 1101 | PadTech Hall Effect (Prototype) | RK RC930-104 v2 | IBM Model M | Noppoo TANK | Keycool Hero 104

Offline AKmalamute

  • HHKB Scrub
  • Posts: 826
  • Location: Western WA, USA
Re: Thumb vs finger operated trackball
« Reply #38 on: Fri, 03 June 2016, 21:04:03 »
Not 100% sure I get the problem you're describing, but FPSs are what got me hooked on thumb-trackballs in the first place.

Generally you want to turn mouse acceleration on; then when you jump from one end of the swiping space to the other, your char has turned a full 180 ... but when you're trying to manipulate 3D objects in Bethesda-space you can still manage to drop the object on the table where you were trying to put it. Upside-down, but still with a degree of precision.

HHKB-lite2, Dvorak user

Offline csmertx

  • proprietor of waffles
  • * Elevated Elder
  • Posts: 2292
  • Location: USA
    • https://csmertx.gitlab.io
Re: Thumb vs finger operated trackball
« Reply #39 on: Fri, 03 June 2016, 21:15:38 »
I can see how gaming could be difficult with the CST. I've watched a video of someone that added some extra buttons to his CST so that he could press the buttons with his thumb. The Marble Mouse trackball I used was perfect for gaming when the ball was new; but after a while, those optical trackball balls start to lose their effectiveness. Maybe the oils from my skin turned the clear coating into an opaque coating? Too bad, because optical tracking is supposedly the most precise
   

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #40 on: Sat, 04 June 2016, 23:10:39 »
Confirmed, that was me using a Logitech T-CH11, the original Logitech optical trackball with three buttons.  In my opinion the best pointing device ever, and a great improvement over its successors.


So I'm assuming that you prefer the thumb operated trackballs over the finger operated ones. What is your take on the Logitech M570?

Offline esr

  • Posts: 10
  • Location: Malvern, PA, USA
  • Yes, *that* ESR. It's what they always ask.
    • Home page
Re: Thumb vs finger operated trackball
« Reply #41 on: Sun, 05 June 2016, 16:30:57 »

So I'm assuming that you prefer the thumb operated trackballs over the finger operated ones. What is your take on the Logitech M570?


Your assumption is correct.

As for the M570, I have one.  it's not horrible, but I have little use for scroll wheels and (being a Linux user) want my third button back.  Also, the top curve of the shell is different from and in my opinion inferior to the T-CH11 - it;s like the designed it for someone with a child-sized right hand.

The RF circuitry is weak; signal can be blocked by the mass of an adult human.

I've heard M570s tend to die quickly, but not had mine long enough to refute the claim.
Unicomp EnduraPro Ultra Classic

Offline davkol

  • Posts: 4993
Re: Thumb vs finger operated trackball
« Reply #42 on: Sun, 05 June 2016, 17:09:41 »
Switches tend to die. I've already replaced the two under the primary two buttons. The rest (back/forward and wheel) is unfortunately more problematic.

Offline esr

  • Posts: 10
  • Location: Malvern, PA, USA
  • Yes, *that* ESR. It's what they always ask.
    • Home page
Re: Thumb vs finger operated trackball
« Reply #43 on: Sun, 05 June 2016, 19:06:14 »
Switches tend to die. I've already replaced the two under the primary two buttons. The rest (back/forward and wheel) is unfortunately more problematic.

To be fair, that can happen with the older Trackman models as well (though they're much more durable than the newer ones).  I had to replace the forefinger switch on my wife's T-CH11 last year.  No big deal, the Omron D2F microswitches they use are very inexpensive and it was all less than 10 minutes of work with a light soldering iron.
Unicomp EnduraPro Ultra Classic

Offline davkol

  • Posts: 4993
Re: Thumb vs finger operated trackball
« Reply #44 on: Mon, 06 June 2016, 03:23:37 »
The M570 usually doesn't even have the cheapest omrons, but I've had problems with those too (ironically, only in Logitech mice/trackballs). They often die within months.

Logitech absolutely used some much better microswitches 15+ years ago. I sometimes harvest Japanese omrons from their OEM ball mice.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #45 on: Mon, 06 June 2016, 04:44:58 »
In the time that I've been using my M570, I have not noticed any problems or issues. One thing I did find was that the scroll wheel was smoother using the standard Mac OS X drivers than installing the Logitech drivers. But in order to get the functionality of the extra two buttons, you need the drivers so it took me a while of adjusting the scrolling speed, etc., to get it working right.

There are plenty of people who love the M570, but equally those who complain about the quality. Even on here...
http://www.trackballmouse.org/logitech-wireless-trackball-m570/

Looking at the site in the link, the Kensington Slimblade and Expert finger operated ones achieve high praise. CST L-Trac too.... But the site calls the M570 as the best selling trackball at the moment.

Offline davkol

  • Posts: 4993
Re: Thumb vs finger operated trackball
« Reply #46 on: Mon, 06 June 2016, 05:20:36 »
But the site calls the M570 as the best selling trackball at the moment.
Because it's Logitech, i.e., available locally in every ****hole, and it's less intimidating than a finger-operated trackball at first look for the general public.

It's the same reason as in case of Razer BlackWidow or SteelSeries 6G until about 2012. If you wanted a mechanical keyboard, these two were the only available in brick-and-mortar stores all over the world.

M570 is a problematic product. It combines Logitech's know-how (above-average wireless w/ Unifying receiver, good tracking) with subpar components: the choice of switches and wheel is something I'd expect in a $5 mouse (actually, Logitech RX250 is higher quality) and not a product with $80 price tag outside the US.
« Last Edit: Mon, 06 June 2016, 05:26:14 by davkol »

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #47 on: Sat, 11 June 2016, 05:57:14 »
Been watching a few reviews on the M570 and there are those who swear by them. I think that when it comes to Thumb and finger operated trackballs, there is pretty much an equal divide. Kind of like asking car guys which do they prefer - Ford or Chevy.  :p ;D

Offline csmertx

  • proprietor of waffles
  • * Elevated Elder
  • Posts: 2292
  • Location: USA
    • https://csmertx.gitlab.io
Re: Thumb vs finger operated trackball
« Reply #48 on: Sat, 11 June 2016, 13:55:54 »
With Logitech's M570 continued success, I find myself wondering why they are so few thumb-operated trackballs models available. The people of Elecom know, I guess it all comes down to the ergonomics of the M570.
   

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #49 on: Sun, 12 June 2016, 00:24:00 »
With Logitech's M570 continued success, I find myself wondering why they are so few thumb-operated trackballs models available. The people of Elecom know, I guess it all comes down to the ergonomics of the M570.
I'm not an expert when it comes to ergonomics, but seeing ESR use the thumb operated trackball and trying out the M570 for myself, I can say that it is pretty good. Doesn't get editor's choice on http://www.trackballmouse.org/, but that is mostly down to the fact that the person who does the reviews prefers the finger operated ones.  :p

Offline wolf

  • Posts: 86
  • Location: Manawatu, New Zealand
  • Ah, yeah, g'day.
Re: Thumb vs finger operated trackball
« Reply #50 on: Tue, 28 June 2016, 03:48:46 »
I use a thumb trackball - Logitech Trackman Wheel - and I use it for hours on end with no strain or fatigue.   I spend numerous hours at home on the computer using the trackball and I even take it to work with me to use it there as well as I find a trackball far preferable to a mouse.  Never yet had a problem with tiring out my thumb or any discomfort.

However, as others have pointed out, it's not going to be ideal for everyone.
Have keyboard, will travel...

Offline Paspie

  • Posts: 29
  • Location: England, UK
Re: Thumb vs finger operated trackball
« Reply #51 on: Thu, 30 June 2016, 07:30:40 »
I once used an M570, until last year when I became so frustrated by having to clean it all the time. Also, the left click button was wearing out. I would agree that the trackball is too small, it too easily moved about if I positioned my thumb close to the edge. It is now in sandwich bag in a cupboard, probably never to be used again.

If I had to get a Trackball now it would definitely be the CST L-Trac, with its middle click.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #52 on: Tue, 27 September 2016, 05:25:28 »
I once used an M570, until last year when I became so frustrated by having to clean it all the time.

Yes, keeping the trackball clean is clearly an issue. But is easy since the ball just pops out when needed. :)

Offline MJL

  • Posts: 43
  • Location: Bay of Plenty, New Zealand
Re: Thumb vs finger operated trackball
« Reply #53 on: Tue, 18 October 2016, 21:04:07 »
I've been in IT since 1984 and have used a variety of mice and trackballs. Must have had just about every trackball that I could get my hands on, cheap and expensive alike. Arthritis is plaguing me and several years ago my right hand (especially my right hand's index knuckle) got so bad that I had to start using my left hand for a pointing device.

Have tried a lot of different combinations like trackpad on one side, trackball other side etc. as well as different brands (for a long time used a 3M ergonomic mouse - more like a joystick).

At the moment I am using a Kensington orbit trackball with scroll ring (ABS plastic and the keys go shiny quickly). It took me about 18 months before I was totally comfortable using my left hand for the mouse, now I do not even think about it and using my right hand feels strange and uncomfortable.

Every now and then I clean the mouse - I am not happy that I cannot take the scroll ring off to clean underneath there - and then use some uMicroLubrol Ultimox 226 (a Teflon lubricant) on the trackball itself (and wipe it off afterwards) to get a silky smooth movement. Initially I used the finger tips but more and more I am using the intermediate (middle) phalanx to move the ball around and use my pinky/ring finger and thumb to move the scroll ring. (Also tried a thumb operated trackball but that quickly resulted in sore swollen joints at the base of the thumb).

I wish there was something available in better quality than this Kensington and have the impression that over the years the quality has gone downhill. Tried some older models without the scroll ring but came back to this one. If you want to try a trackball out then this might be one to start off with. One caveat: Using a trackball does not allow you to position / resize as accurate as a mouse. I also use something called splitview to quickly resize two programs exactly to a part of the screen and am using more and more keyboard shortcuts rather than "point and click and destroy the joints in your hand".
« Last Edit: Tue, 18 October 2016, 21:13:04 by MJL »

Offline MJL

  • Posts: 43
  • Location: Bay of Plenty, New Zealand
on another subject: your eyes....
« Reply #54 on: Tue, 18 October 2016, 21:29:31 »
The LED screens with their harsh blue backlighting will damage your eyes - I've got early cataracts and have damage to the retina. Opticians see more and more young people with damage to their eyes and they attribute this to the intense light, especially in the blue part of the spectrum, from LED screens and smartphones.

If you are wearing eye glasses you might want to investigate Zeiss's computer coatings that (hopefully) filter out the most damaging part of the blue light. (same as the horrible LED headlights of cars - they almost blind me when driving at night).

Initially I use flux for working late at night but since getting specific coatings I find that flux no longer is needed.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #55 on: Fri, 25 November 2016, 23:37:23 »
One caveat: Using a trackball does not allow you to position / resize as accurate as a mouse.
I'm not sure about that. There are those who say that using a trackball is far more accurate than a mouse. Especially in the fields of 3D rendering and stuff. I for one have had no such issues. I suppose everyone is different. What is best for you isn't necessarily the best for someone else.

Initially I used the finger tips but more and more I am using the intermediate (middle) phalanx to move the ball around and use my pinky/ring finger and thumb to move the scroll ring. (Also tried a thumb operated trackball but that quickly resulted in sore swollen joints at the base of the thumb).

I wish there was something available in better quality than this Kensington and have the impression that over the years the quality has gone downhill.
Have you tried the Kensington SlimBlade?

I currently use a thumb operated Logitech M570. Never has any issues with it.


Offline DanD3n

  • Posts: 26
  • Location: EU, Ro
Re: Thumb vs finger operated trackball
« Reply #56 on: Fri, 02 December 2016, 10:29:22 »
Had a Logitech M570, it was fine for two or three months, very comfortable, but the ball was small, required cleaning often and least but not last, my thumb's wrist tendons started to hurt. After that i bought a vertical mouse, and it was again fine for a while, until the pain appeared in a slightly different place. My conclusion: if you suffer for RSI, change your input method from time to time.

Offline YoshiCaps

  • Posts: 163
  • Location: earth
  • yes, oh god no.
Re: Thumb vs finger operated trackball
« Reply #57 on: Fri, 02 December 2016, 19:17:20 »
Had a Logitech M570, it was fine for two or three months, very comfortable, but the ball was small, required cleaning often and least but not last, my thumb's wrist tendons started to hurt. After that i bought a vertical mouse, and it was again fine for a while, until the pain appeared in a slightly different place. My conclusion: if you suffer for RSI, change your input method from time to time.
You see if I had to buy a trackball- I hate them honestly- bit i don't like the m570 cause it makes me want to move it around... when it has no sensor.
hi.

Online Tom_Kazansky

  • Posts: 233
  • Location: Vietnam
  • Oblivion Knight
Re: Thumb vs finger operated trackball
« Reply #58 on: Fri, 02 December 2016, 23:23:25 »
I have a Kensington Expert Mouse (finger operated) for 2 years.

It certainly is not a mouse for gaming, but it is great for everyday use like browsing web.

154477-0

One thing I'm sad about this trackball is: I must run its software to get the custom key (and other features) working and when I do, the mouse scroll speed of Windows is reseted to 1 (it makes scrolling of other mouse, G502, slow...   :rolleyes: )
"Any sufficiently advanced technology is indistinguishable from magic" - Arthur C. Clarke

Offline ArchDill

  • Posts: 706
  • Location: OK
Re: Thumb vs finger operated trackball
« Reply #59 on: Sat, 03 December 2016, 02:14:36 »
Just got a thumb trackball and I am enjoying it. Do people game with trackballs?

Offline DanD3n

  • Posts: 26
  • Location: EU, Ro
Re: Thumb vs finger operated trackball
« Reply #60 on: Sat, 03 December 2016, 04:32:12 »
I think it depends on the game played and on the type of trackball used. For fast paced shooters, like quake 3, i've got great results with my thumb operated trackball, but i'm not a pro player by any sort of imagination. And you need practice till you get adjusted to the feel. But i think this only works when you can press the main buttons and still be able to spin the ball, otherwise it won't work in FPS games, only top down RPGs and RTS. The M570 is perfect for this, but your thumb will hurt in time (at least from my experience).

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #61 on: Sat, 03 December 2016, 11:25:49 »
I think it depends on the game played and on the type of trackball used. For fast paced shooters, like quake 3, i've got great results with my thumb operated trackball, but i'm not a pro player by any sort of imagination. And you need practice till you get adjusted to the feel. But i think this only works when you can press the main buttons and still be able to spin the ball, otherwise it won't work in FPS games, only top down RPGs and RTS. The M570 is perfect for this, but your thumb will hurt in time (at least from my experience).
There are those who are skeptical about using a trackball for gaming.

Then I did see a video of a guy using a thumb operated trackball for an FPS. He came about it by accident. Just out of necessity actually. His mouse broke and started using an old trackball just to make do that day. Found he liked it and then continued..
This is pretty cool.

Can use finger operated one too. I saw a video of someone using a Kensington Slimblade.
« Last Edit: Sat, 03 December 2016, 11:53:01 by knightjp »

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #62 on: Sat, 03 December 2016, 13:50:52 »

Offline happylacquer

  • Posts: 400
  • Location: USA
  • BS Apologist
    • BHOBuds
Re: Thumb vs finger operated trackball
« Reply #63 on: Sat, 24 December 2016, 04:24:22 »
I have a M570. Bought it to try out thumb trackballs as I had never owned such a unit up until then... It's nice for casual use but any sort of precision is needed and it's god awful and frustrating. impossible to use with right hand too obviously, at least properly.

I've had the same Logitech Trackman for longer than I can remember. Even lacking a scroll mechanism, that trackball is perfect for me. I've got hundreds of hours in various FPSes with it and I just always have been able to do things I can't with mice with a trackball. It definitely works too, because I devastated at Overwatch (went back to CS:GO though where I am just okay)

I play Street Fighter 5 more than any FPS though...

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #64 on: Sat, 24 December 2016, 13:23:13 »
I have a M570. Bought it to try out thumb trackballs as I had never owned such a unit up until then... It's nice for casual use but any sort of precision is needed and it's god awful and frustrating. impossible to use with right hand too obviously, at least properly.

I've had the same Logitech Trackman for longer than I can remember. Even lacking a scroll mechanism, that trackball is perfect for me. I've got hundreds of hours in various FPSes with it and I just always have been able to do things I can't with mice with a trackball. It definitely works too, because I devastated at Overwatch (went back to CS:GO though where I am just okay)

I play Street Fighter 5 more than any FPS though...
Been using the M570 for a long time now and I like a lot. I have seen many reviews on youtube where the guys say that they loved it so much they bought another one.
However I am looking at getting myself a finger operated Kensington. I am looking at the Expert or the Slimblade. Wondering which one of them is the better one.

Offline happylacquer

  • Posts: 400
  • Location: USA
  • BS Apologist
    • BHOBuds
Re: Thumb vs finger operated trackball
« Reply #65 on: Sat, 24 December 2016, 21:12:54 »
I have a M570. Bought it to try out thumb trackballs as I had never owned such a unit up until then... It's nice for casual use but any sort of precision is needed and it's god awful and frustrating. impossible to use with right hand too obviously, at least properly.

I've had the same Logitech Trackman for longer than I can remember. Even lacking a scroll mechanism, that trackball is perfect for me. I've got hundreds of hours in various FPSes with it and I just always have been able to do things I can't with mice with a trackball. It definitely works too, because I devastated at Overwatch (went back to CS:GO though where I am just okay)

I play Street Fighter 5 more than any FPS though...
Been using the M570 for a long time now and I like a lot. I have seen many reviews on youtube where the guys say that they loved it so much they bought another one.
However I am looking at getting myself a finger operated Kensington. I am looking at the Expert or the Slimblade. Wondering which one of them is the better one.

I can understand the love for the m570, if you don't have any problems with your thumb getting tired then it is a comfy design plus it's nice to be able to put anywhere when it's wireless. The Microsoft thumb trackball mouse (i forget the model name) was crazy popular and still sells for ridiculous amounts of money. I haven't used one since the 90s though so idk if it's better than the m570.

Offline ChitownM2

  • Posts: 282
Re: Thumb vs finger operated trackball
« Reply #66 on: Sat, 24 December 2016, 22:41:20 »
I've been using a version of the M570 since long before it was called a 570. Probably 1995 or so when it was just a 3 button trackball, then I had to buy a new one when they invented the scroll wheel, and then others as I got more computers. I absolutely love it and always have, I usually have the sensitivity set pretty high so the amount of movement required by my thumb is pretty minimal. At this point I don't think I could ever go back to anything else.

It has always treated me well and I've never had one break. I remember how "revolutionary" it was to have a laser reading the ball back then and not having to clean the physical rollers on the mouse. I also remember it being expensive....something like $80 back in 1995.

Offline ArchDill

  • Posts: 706
  • Location: OK
Re: Thumb vs finger operated trackball
« Reply #67 on: Tue, 10 January 2017, 03:11:06 »
I use a Logitech M570 at work and I just ordered a Kensington Expert for home use.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #68 on: Tue, 10 January 2017, 03:26:08 »
I use a Logitech M570 at work and I just ordered a Kensington Expert for home use.

Which of the two types do you prefer?

Offline ArchDill

  • Posts: 706
  • Location: OK
Re: Thumb vs finger operated trackball
« Reply #69 on: Tue, 10 January 2017, 12:24:44 »
I still have not received my Kensington.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #70 on: Fri, 13 January 2017, 16:24:18 »
If you ask this question on Google, you will see many threads on forums about "Finger vs Thumb operated trackballs.

I found this one that had most of the people preferring Thumb operated ones. http://www.techimo.com/forum/general-tech-discussion/54800-finger-thumb-trackball.html

While those who are fans of finger operated trackballs state that greater accuracy can be obtained, etc. Another interesting thing is that most of the noteworthy finger trackballs are ambidextrous. However not much is mentioned about the benefits of the thumb operated ones. The first one is getting used to a trackball. For instance my Logitech M570 is the first trackball I have ever used and I got to grips with it easily since its operation is so close to using a mouse. Most of the finger placements are the same. Size is another factor. Comparing with some of the well known finger operated models, especially a Slimblade or Expert, the thumb operated trackballs are smaller and more compact. I guess easier for those who are one the move.

I have been using my M570 for quite a while now and I do not have complaints or any health issues using a thumb operated trackball. I am considering on getting a Slimblade. This is to see whether I would enjoy using it more than using my M570. There is also another reason. If I was considering on switching to Dvorak, it is better to use the mouse with the left hand. That would mean that using a Slimblade would be essential.

Offline ArchDill

  • Posts: 706
  • Location: OK
Re: Thumb vs finger operated trackball
« Reply #71 on: Sun, 15 January 2017, 02:26:26 »
I use a Logitech M570 at work and I just ordered a Kensington Expert for home use.

Which of the two types do you prefer?

Kensington came in.

I still enjoy my thumb ball fork work and travel but I am LOVING this Kensington. I really enjoy the programming of it most of all.

Offline davkol

  • Posts: 4993
Re: Thumb vs finger operated trackball
« Reply #72 on: Sun, 15 January 2017, 07:26:25 »
FWIW my dad (who's had some elbow/arm problems) has recently started to use a Kensington Expert instead of Logitech TrackMan Wheel, that I gave him, and he calls it a night-day difference too.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #73 on: Mon, 16 January 2017, 15:15:00 »
Kensington came in.

I still enjoy my thumb ball fork work and travel but I am LOVING this Kensington. I really enjoy the programming of it most of all.

What are your initial impressions of using the Kensington as compared with the M570?

Offline ArchDill

  • Posts: 706
  • Location: OK
Re: Thumb vs finger operated trackball
« Reply #74 on: Mon, 16 January 2017, 22:10:13 »
Kensington came in.

I still enjoy my thumb ball fork work and travel but I am LOVING this Kensington. I really enjoy the programming of it most of all.

What are your initial impressions of using the Kensington as compared with the M570?

It was a little weird getting used to at first. I love how bulky and comfortable it is. Have my double top click set for home and double bottom click set for end.

Offline deacon

  • Posts: 13
Re: Thumb vs finger operated trackball
« Reply #75 on: Sun, 19 February 2017, 19:40:54 »
Thumb for me, finger balls have always felt weird. I am likely biased though.
I've been using Logitech Trackman thumb balls since an ADB square one, that's decades of normal use and FPS play. Loved my Trackman Marble Wheel but another couple tumbles off the couch and it was going to need surgery.

I begrudgingly went wireless and have been surprised by the M570 I got to replace it. It is smaller body doesn't support my whole hand but the deeper palm swell and steeper curves are quite comfortable for long periods. On a desk, the edge of your hand and rear of the palm rests on the desk and the M570 is under the remainder.

The M570 is addressed differently too with your first two fingers on the buttons and two on support grooves rather than the first three being over a button or wheel.

One thing I haven't liked is the switches are too light to "make" and too quick to "break" but that shouldn't been too hard to replace with different switches once these go wonky.

-D

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #76 on: Sun, 19 February 2017, 22:43:43 »
I've been using my M570 for a while now. In terms of quality, I cannot say for certain how it does compare with other trackballs; since it is my first and only. I can say that I like using it. It is certainly comfortable and those who are fans of it are certainly justified.


Offline happylacquer

  • Posts: 400
  • Location: USA
  • BS Apologist
    • BHOBuds
Re: Thumb vs finger operated trackball
« Reply #77 on: Mon, 20 February 2017, 03:25:20 »
finger for precision
thumb for laziness and comfort

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #78 on: Fri, 17 March 2017, 06:37:55 »
I'm pretty much enjoying using my Logitech M570. So far it hasn't missed a beat.

Offline mozart

  • Posts: 3
Re: Thumb vs finger operated trackball
« Reply #79 on: Sun, 06 August 2017, 15:01:38 »
I made the M570 mouse a stand so it became a real mouse, I like it because you do not have to move. In addition, there is a Logitech touchpad that is centered on Ergodox or left. I still have to get some tracball, because my branch is not very accurate.
Sorry translation is Google translate.
[ Specified attachment is not available ][/img] [ Specified attachment is not available ][img]
« Last Edit: Sun, 06 August 2017, 15:15:52 by mozart »

Offline tp4tissue

  • * Destiny Supporter
  • Posts: 11640
  • Location: Official Geekhack Public Defender..
  • OmniExpert of: Rice, Top-Ramen, Ergodox, n Females
Re: Thumb vs finger operated trackball
« Reply #80 on: Sun, 06 August 2017, 19:52:28 »
Hahahahaha..  looks good.


Have you looked into HIGHER tenting for ur ergodox ?


I use 55 Degree personally. 


Put a couple books under ur ergodox and try it out.

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #81 on: Mon, 07 August 2017, 00:20:24 »
That looks good. Although I've never thought that the M570 needed a stand. Been using one for 3 years.. Its a great device.
I've never tried the finger ones though... Hard to get them here in Dubai and ordering from ebay or Amazon takes ages.

Offline mozart

  • Posts: 3
Re: Thumb vs finger operated trackball
« Reply #82 on: Mon, 07 August 2017, 21:40:31 »
I can not raise any more because I use the drwbar, free height is 50mm.
175279-0
The picture will be reversed?
« Last Edit: Mon, 07 August 2017, 21:42:21 by mozart »

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #83 on: Wed, 09 August 2017, 00:26:51 »
Got myself a Kensington Slimblade yesterday. Managed to find the only remaining one in Dubai for sale as brand new device and the price is half for what I would have paid on Amazon or ebay.
So far, apart from the amazing deal, I do like it.
The device itself does have really good premium feel. By comparison the Logitech looks really cheap. Strange thing is that I paid less for the Slimblade actually..  :D
Things are a bit awkward at the moment in terms of a computing experience. I'm still undecided on whether I prefer the Slimblade over the Logitech M570, but I'm attempting to give it a fair try.
For those who are used to mice, I would say that the thumb-operated one is a really good fit. Whether the ergonomics of the Slimblade is better than the M570, I have to see. But so far it is working well, and I have no issues.
The scrolling feature is nothing but genius. I actually like it. The moving the cursor and twisting the same for scrolling, makes workflow just as fast as being on the Logitech M570.  :thumb:
The buttons on the Slimblade have a different feel and require a bit of force to depress. I'm guessing since the device is new and has such a glossy finish, I'm hesitant to press it with the same amount of force that I would the M570...  :p



Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #84 on: Fri, 11 August 2017, 15:24:23 »
Update on the Slimblade usage. I'm slowly getting to grips with the device. I guess that I need to unlearn quite a bit of muscle memory before I get completely comfortable with it.
The one thing that I say is I use a generic mouse at work. Since I am at work for most of my days and I only get to use the Slim blade in the evening when I get home. This can contribute to the slow learning of the device. Maybe I should consider hauling the device to work back. But I'm unwilling to bring my own devices to work... :P

The one complaint that I have though is that the I've set the top left button as the "Back" Button. The profile says all Applications, but it doesn't work on all applications. The only time it work is on a browser like Firefox or Safari. Yes.. I use Mac OS..  :thumb:
Maybe there is a problem with the driver.

Offline tp4tissue

  • * Destiny Supporter
  • Posts: 11640
  • Location: Official Geekhack Public Defender..
  • OmniExpert of: Rice, Top-Ramen, Ergodox, n Females
Re: Thumb vs finger operated trackball
« Reply #85 on: Sat, 12 August 2017, 01:29:09 »
I can not raise any more because I use the drwbar, free height is 50mm.
(Attachment Link)
The picture will be reversed?


You have to get into the mindset that if the table doesn't allow you to do something.

Fvk the table..  cut holes in the table, drill holes on the side to lower the keyboard tray, etc etc,,  it's just a table..   YOU ARE A HUMAN BEING,  the world bends to YOUR WILL,   not the other way around..


Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #86 on: Mon, 28 August 2017, 13:02:32 »
After a while with the Slimblade, I must say that I am still feeling a bit of difficulty in being completely proficient with the device. Maybe it is because I do not know is the proper way to use it or maybe it just takes time.

Offline Targa-TV

  • Posts: 183
  • Location: Italy
Re: Thumb vs finger operated trackball
« Reply #87 on: Sun, 17 September 2017, 03:01:39 »
I can vouch for Kensington Slimblade. It's so comfortable to use (I have RSI), the "click click" sound of the (built-in) scroll is very satisfying, the button have never failed me, there are 4 of them, reprogrammable, and the trackball itself is low profile. Love it.

The downsides are the lucid finish of the body that accumulates the oil of the skin VERY easily, as well as the fact that every tiny piece of dust that slips in the space between the ball and the body will obstruct the bearings and the ball won't work anymore. Fixing this is very easy though, when you notice that the pointer arrow doesn't move, remove the ball, swipe a kleenex over the bearings, and that's it.
Filco MJ2 Black - MX Red | VA88M - MX Brown | Cherry G80-3000 -
  MX Blue | Cherry G80-3000 - MX Black | XD75re - MX Silent Red

[image]http://i.imgur.com/our8YUc.png[/image]

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #88 on: Mon, 18 September 2017, 23:57:43 »
I enjoy using the Slimblade, but after using a mouse for such a long time, and the fact that I have to use a generic mouse at work, it does feel king of different to use. I can't say that I have the same speed and accuracy as on a mouse, but it is getting there.

Offline wolf

  • Posts: 86
  • Location: Manawatu, New Zealand
  • Ah, yeah, g'day.
Re: Thumb vs finger operated trackball
« Reply #89 on: Sun, 24 September 2017, 00:13:29 »
Since my post back in June, I've got an M570 which I use at home and now leave my old wired Trackman Wheel at work so I can use a familiar trackball at both work and home without transporting one back and forth.

I don't do a lot of gaming but I play Portal using the trackball and have no problem with it.  Likewise, I can move it precisely enough to do any detailed work I need to do.  (Disclaimer: I may not need to do the level of precision that others require.

If I'm forced to use a mouse, I still get Carpal Tunnel issues from trying to grip something of that size - same as if I hold a telephone handset up to my ear for too long.

So far, after years of using a thumb-controlled Trackball, I've had no problems with pain or numbness in my hands, wrists or thumbs.
Have keyboard, will travel...

Offline Prothrin

  • Posts: 26
Re: Thumb vs finger operated trackball
« Reply #90 on: Thu, 12 October 2017, 05:00:33 »
Might want to take a look at this new trackball mouse from Logi[tech].

Offline knightjp

  • Thread Starter
  • Posts: 116
Re: Thumb vs finger operated trackball
« Reply #91 on: Thu, 12 October 2017, 06:50:26 »

Offline Zobeid Zuma

  • Posts: 238
  • Location: Texas
Re: Thumb vs finger operated trackball
« Reply #92 on: Thu, 12 October 2017, 08:58:18 »
Does nobody here use a CST?  I just got one not too long ago, and it's working well for me.

When I move it, I rest the middle part of my fingers -- not the fingertips -- on the ball and then move my whole hand and sort of roll my fingers across the top of the ball.  I've never used a thumb trackball, but I suspect the motion would be similar.

Offline Ceraon

  • Posts: 5
Re: Thumb vs finger operated trackball
« Reply #93 on: Thu, 12 October 2017, 18:53:03 »
As for the M570, I have one.  it's not horrible, but I have little use for scroll wheels and (being a Linux user) want my third button back.  Also, the top curve of the shell is different from and in my opinion inferior to the T-CH11 - it's like the designed it for someone with a child-sized right hand.

I am Linux user too and find the scroll wheel scrolls just fine.  It also works as the third button, i.e. you click the wheel.  It does take a little practice at first not to turn the wheel as you press is downwards but didn't take long to get used to that.

The RF circuitry is weak; signal can be blocked by the mass of an adult human.

Mine seemed OK - I had the M570 on the top of the desk and had the receiver under the desk where I have a KVM switch.  Interestingly the receiver worked fine in the KVM switch despite Logitech not supporting that mode of operation but I did have to put the receiver into the hub port of the KVM, i.e. the one that doesn't have the KVM looking for hotkeys but is just a plain USB hub switched to whichever PC.

I've heard M570s tend to die quickly, but not had mine long enough to refute the claim.

Mine has certainly died, in the sense that if I turn if off and turn it on again it will work for a few second and then stop working.  New batteries does not fix the issue.  I have probably had it a couple of years.  I am now using a Perrix one which is almost identical.

Thumb ball users, how's cursor stability on a thumb ball during energetic spam-clicking while simultaneously moving the ball (or at least not lifting your finger off of it)?

I don't find it to be an issue as there is no moving of fingers.  On a typical thumb ball there is only one hand position with the thumb on the ball and the fingers on their respective button so if you can move a finger without moving your thumb it will work fine.  That certainly my experience.

I did use the Kensington Orbit before they introduced the version with the scroll ring and didn't really get on with it and I wondering now if the issue was the need to move fingers around.  I will see if I can find it again and give it another go.

My first trackball was the Logitech Trackman Marble FX which a number of other people have mentioned. This is a finger ball but unlike the Kensington ambidextrous ones it is shaped for the right hand.  The way I used it, which is  what I think was intended, was my thumb on the left button, my ring finger on the right button and my pointer and middle fingers on the ball.  The centre button was less convenient but not hard to get to as that involved moving the thumb (it was on a vertical face so certainly not intended to use the pointer finger on it.  I dug it out to describe here and was reminded why I stopped using it - the left button has become dodgy.

Before it developed the fault I liked using it.  Whether because of the bigger ball or using the fingers instead of thumbs it seemed easier to have a decent rate of movement and still be able to position accurately.  It is much less like using a mouse, though than the thumb balls so you have to be a little patient at first.
« Last Edit: Thu, 12 October 2017, 18:56:49 by Ceraon »

Offline TheOtherDave

  • Posts: 17
Re: Thumb vs finger operated trackball
« Reply #94 on: Mon, 16 October 2017, 16:18:08 »
Thumb trackballs kind of strain my wrist... Is that just me?
No, I havenít found one that doesnít make my thumb ache after a while. Itís too bad, too, since the buttons seem to have better placement with those. Well, for my hands, anyway.

Offline csmertx

  • proprietor of waffles
  • * Elevated Elder
  • Posts: 2292
  • Location: USA
    • https://csmertx.gitlab.io
Re: Thumb vs finger operated trackball
« Reply #95 on: Mon, 16 October 2017, 16:31:09 »
Thumb trackballs kind of strain my wrist... Is that just me?
No, I havenít found one that doesnít make my thumb ache after a while. Itís too bad, too, since the buttons seem to have better placement with those. Well, for my hands, anyway.

I wouldn't say it's just you. Mine is a fingertip trackball but I have scroll mapped to a thumb button and that causes a bit of thumb/wrist ache. Thumb trackballs are not for me.
   

Offline Ceraon

  • Posts: 5
Re: Thumb vs finger operated trackball
« Reply #96 on: Mon, 16 October 2017, 17:16:23 »
No, I havenít found one that doesnít make my thumb ache after a while. Itís too bad, too, since the buttons seem to have better placement with those. Well, for my hands, anyway.

I haven't had the aching problem, but now trying the Kensington Orbit with Scroll Wheel which is a finger ball it does seem to be that amongst current designed the finger balls are optimised for moving the pointer and the thumb balls are optimised for clicking the buttons.

Offline SamirD

  • * Esteemed Elder
  • Posts: 1485
  • Location: HSV and CHI
  • on Buckling Springs since '88
    • http://www.huntsvillecarscene.com
Re: Thumb vs finger operated trackball
« Reply #97 on: Tue, 17 October 2017, 12:52:52 »
I've been using a version of the M570 since long before it was called a 570. Probably 1995 or so when it was just a 3 button trackball, then I had to buy a new one when they invented the scroll wheel, and then others as I got more computers. I absolutely love it and always have, I usually have the sensitivity set pretty high so the amount of movement required by my thumb is pretty minimal. At this point I don't think I could ever go back to anything else.

It has always treated me well and I've never had one break. I remember how "revolutionary" it was to have a laser reading the ball back then and not having to clean the physical rollers on the mouse. I also remember it being expensive....something like $80 back in 1995.
Do you remember the model number of this Logitech?  I'm curious if it's the same one I tried during that era.

My wife got an M570 almost a year back.  I can't believe she got a real input device!  She's usually not into such things, but now she takes it everywhere with her work laptop.  :thumb: