« previous next »
Pages:  [1]     Go Down

Author Topic: Flat keycaps for Topre ?  (Read 3220 times)

0 Members and 1 Guest are viewing this topic.

Offline Leoboc

  • Thread Starter
  • Posts: 2
Flat keycaps for Topre ?
« on: Tue, 13 October 2015, 07:53:23 »
Hi everyone  ^-^

First time posting but long time lurking, enough to convince me to get my hands on a realforce 
88ub. I’m really happy about it, but the only thing is I’d like to use it to play Starcraft 2, and I can’t, because of the profile of the keycaps. Indeed I’m using « the core » hotkey layout to play, and it requires to tilt the board (pic included) ; the thing is that with this tilt, the ergonomic profile of the right shift key prevents me to press both shift + ctrl with my thumb, because the bottom of the shift key is to high and hurt my finger.





So my question is : is there anyone who knows where I could find a « flat » shift keycap for Topre ? I saw that elite keyboards sells Topre modifiers, but the profile looks the same ; I’ve took a look toward artisans as well, but I didn’t find any shift keycap. I even considered buying the EK modifiers, and « mod » them myself to flatten the bottom.

As you can see I’m kinda struggling with english so I hope I made myself clear, and thanks in advance to everyone who could help me  :D :D
Logged

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: Flat keycaps for Topre ?
« Reply #1 on: Tue, 13 October 2015, 07:58:13 »
It is possible to get mx keycap compatible topre stems then you could use any mx keycap.
Logged

Offline sth

  • 2 girls 1 cuprubber
  • Posts: 3438
Re: Flat keycaps for Topre ?
« Reply #2 on: Tue, 13 October 2015, 07:59:12 »
there is no flat key but you could maybe try flipping the key around if it really hurts? i'll avoid making fun of your thumb sensitivity :P
Logged
11:48 -!- SmallFry [~SmallFry@unaffiliated/smallfry] has quit [Ping timeout: 245 seconds] ... rest in peace

Offline Oobly

  • * Esteemed Elder
  • Posts: 3929
  • Location: Finland
Re: Flat keycaps for Topre ?
« Reply #3 on: Tue, 13 October 2015, 09:17:23 »
You could try flip the keycap around, so the lower edges are closest to each other. (or is this not possible with the Realforce, I'm not a Topre expert)
Logged
Buying more keycaps,
it really hacks my wallet,
but I must have them.

Offline sth

  • 2 girls 1 cuprubber
  • Posts: 3438
Re: Flat keycaps for Topre ?
« Reply #4 on: Tue, 13 October 2015, 09:29:51 »
Quote from: Oobly on Tue, 13 October 2015, 09:17:23
You could try flip the keycap around, so the lower edges are closest to each other. (or is this not possible with the Realforce, I'm not a Topre expert)

Quote from: sth on Tue, 13 October 2015, 07:59:12
there is no flat key but you could maybe try flipping the key around if it really hurts? i'll avoid making fun of your thumb sensitivity :P

am i on oobly's ignore list???
Logged
11:48 -!- SmallFry [~SmallFry@unaffiliated/smallfry] has quit [Ping timeout: 245 seconds] ... rest in peace

Offline Oobly

  • * Esteemed Elder
  • Posts: 3929
  • Location: Finland
Re: Flat keycaps for Topre ?
« Reply #5 on: Tue, 13 October 2015, 09:50:05 »
Quote from: sth on Tue, 13 October 2015, 09:29:51
Quote from: Oobly on Tue, 13 October 2015, 09:17:23
You could try flip the keycap around, so the lower edges are closest to each other. (or is this not possible with the Realforce, I'm not a Topre expert)

Quote from: sth on Tue, 13 October 2015, 07:59:12
there is no flat key but you could maybe try flipping the key around if it really hurts? i'll avoid making fun of your thumb sensitivity :P

am i on oobly's ignore list???

oops, sorry, my bad... really tired today... other lame excuse... more lame excuses...
Logged
Buying more keycaps,
it really hacks my wallet,
but I must have them.

Offline Leoboc

  • Thread Starter
  • Posts: 2
Re: Flat keycaps for Topre ?
« Reply #6 on: Tue, 13 October 2015, 14:50:45 »
Thanks a lot for the quick answers !!

About the mx to topre stems, I think there is at the moment no way not involving a complex / expensive 3D printing right :/ ?

So I tried to flip my keycap (brillant idea !) and it works way better, thanks again, even if I still feel that damn edge a bit on the top of my thumb..

Anyway thanks a lot, I think I'll try to perform some surgery on that EK lavender - or orange ??????- modifiers  ^-^  ^-^
« Last Edit: Tue, 13 October 2015, 14:57:27 by Leoboc »
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Flat keycaps for Topre ?
« Reply #7 on: Tue, 13 October 2015, 20:48:05 »
Quote from: Leoboc on Tue, 13 October 2015, 14:50:45
Thanks a lot for the quick answers !!

About the mx to topre stems, I think there is at the moment no way not involving a complex / expensive 3D printing right :/ ?

So I tried to flip my keycap (brillant idea !) and it works way better, thanks again, even if I still feel that damn edge a bit on the top of my thumb..

Anyway thanks a lot, I think I'll try to perform some surgery on that EK lavender - or orange ??????- modifiers  ^-^  ^-^

BunnyLake from [CTRL]ALT has paired with JT Keycaps to produce some that are, AFAIK, not 3D printed, but properly molded.

These are not directly available at the moment, but the first batch is on the way.
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline Oobly

  • * Esteemed Elder
  • Posts: 3929
  • Location: Finland
Re: Flat keycaps for Topre ?
« Reply #8 on: Wed, 14 October 2015, 03:31:56 »
Quote from: rowdy on Tue, 13 October 2015, 20:48:05
Quote from: Leoboc on Tue, 13 October 2015, 14:50:45
Thanks a lot for the quick answers !!

About the mx to topre stems, I think there is at the moment no way not involving a complex / expensive 3D printing right :/ ?

So I tried to flip my keycap (brillant idea !) and it works way better, thanks again, even if I still feel that damn edge a bit on the top of my thumb..

Anyway thanks a lot, I think I'll try to perform some surgery on that EK lavender - or orange ??????- modifiers  ^-^  ^-^

And there's also the CMStorm Novatouch, Royal Kludge RC930 and Noppoo 108EC-Pro which all have MX compatible sliders that fit Topre boards.

BunnyLake from [CTRL]ALT has paired with JT Keycaps to produce some that are, AFAIK, not 3D printed, but properly molded.

These are not directly available at the moment, but the first batch is on the way.
Logged
Buying more keycaps,
it really hacks my wallet,
but I must have them.
Pages:  [1]     Go Up
« previous next »