[IC] LeandreN Round 4 - PCBs, plates etc.

[LeandreN]

Please share your ideas in this form. Thanks.

Please fill out the Google form and discuss stuff here. This is seperate from the Winkeyless and HHKB plates I am planning.

PCBs by GON

Orange & black PCBs available.

Plates  by me and JD

60% is still the theme because of the demand!

Plates are available in different colours.

[TalkingTree]

Filled.

[JorisBoers]

I filled it real good ( ͡° ͜ʖ ͡°)

[Sifo]

You'll never guess which answer was mine

[db268]

Filled. Probably interested in the plates

[LeandreN]

You'll never guess which answer was mine

Octarine is no colour

EDIT: Octarine is the imaginary colour of magic

I will look that up for you Sifo and see if it is available.

[LeandreN]

Filled.

You are always fast!

[SaiZn]

Any plans for a prototyper round 2?

[LeandreN]

Any plans for a prototyper round 2?

Soon™

[lashiel]

I haven't even built my stuff from last buy. But part of me feels like I should order something here anyways....

I'll have to think about what I want.

Edit: obviously, the above being in the case this happens. Filled out the form regardless.

[xondat]

Filled.

NAA

[LeandreN]

Thanks for all the answers!

I was thinking about doing a custom orange/purple PCB for the Geekhack theme, but then i would need a PCB in a neutral colour too, which is difficult because of the high MOQ that is set.(We need to order more than the last GB).

[ccarlitos2]

Wait when you say Winkeyless. Are you talking about a winkeyless 60%? One of my dream boards is a Winkeyless 60% with a short right shift...


edit: Filled out form   

[LeandreN]

Wait when you say Winkeyless. Are you talking about a winkeyless 60%? One of my dream boards is a Winkeyless 60% with a short right shift...


edit: Filled out form   

That GB is soon(trademark).

True Winkeyless plates with winkey covered. Split shift, stepped or non stepped caps lock and ISO/ANSI.

[TalkingTree]

I was thinking about doing a custom orange/purple PCB for the Geekhack theme, but then i would need a PCB in a neutral colour too, which is difficult because of the high MOQ that is set.(We need to order more than the last GB).

LeandreN's Orange sounds fun to me.
What's the MOQ?

[ccarlitos2]

Wait when you say Winkeyless. Are you talking about a winkeyless 60%? One of my dream boards is a Winkeyless 60% with a short right shift...


edit: Filled out form   

That GB is soon(trademark).

True Winkeyless plates with winkey covered. Split shift, stepped or non stepped caps lock and ISO/ANSI.

-drooling- oh my god... is there an IC thread for this? I already know what I want Winkeyless, stepped, split shift.. LeandreN gimme now please and thank you 

[LeandreN]

I was thinking about doing a custom orange/purple PCB for the Geekhack theme, but then i would need a PCB in a neutral colour too, which is difficult because of the high MOQ that is set.(We need to order more than the last GB).

LeandreN's Orange sounds fun to me.
What's the MOQ?

100 PCBs for a new colour preferably. I can do it by paying a fee and stuff, but i don't want to delay anything because of the colour. Also, i need colours that anyone would buy.

[LeandreN]

Wait when you say Winkeyless. Are you talking about a winkeyless 60%? One of my dream boards is a Winkeyless 60% with a short right shift...


edit: Filled out form   

That GB is soon(trademark).

True Winkeyless plates with winkey covered. Split shift, stepped or non stepped caps lock and ISO/ANSI.

-drooling- oh my god... is there an IC thread for this? I already know what I want Winkeyless, stepped, split shift.. LeandreN gimme now please and thank you 

Yes there is

https://geekhack.org/index.php?topic=77342.0

[TalkingTree]

i need colours that anyone would buy.

How did it go with SPRiT's then? It came in black, blue and white.

[LeandreN]

Ok someone is putting 40 USD in as a good price, that's a really  great price and won't happen. Also the 80 USD option shouldn't be there. That is above retail, sorry for that.

Aiming for around 60-65. Retail is 70 + shipping + inspection fees.

Stabilisers will be available.

[LeandreN]

i need colours that anyone would buy.

How did it go with SPRiT's then? It came in black, blue and white.

SPRiT already had those made. Most of the PCBs atleast.

[TalkingTree]

i need colours that anyone would buy.

How did it go with SPRiT's then? It came in black, blue and white.

SPRiT already had those made. Most of the PCBs atleast.

Sorry, I didn't make myself clear.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.

[LeandreN]

i need colours that anyone would buy.

How did it go with SPRiT's then? It came in black, blue and white.

SPRiT already had those made. Most of the PCBs atleast.

Sorry, I didn't make myself clear.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.

Aha! Thanks. The black one was the most popular one.

[TalkingTree]

i need colours that anyone would buy.

How did it go with SPRiT's then? It came in black, blue and white.

SPRiT already had those made. Most of the PCBs atleast.

Sorry, I didn't make myself clear.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.

Aha! Thanks. The black one was the most popular one.

You got yourself your first candidate colour.

[LeandreN]

i need colours that anyone would buy.

How did it go with SPRiT's then? It came in black, blue and white.

SPRiT already had those made. Most of the PCBs atleast.

Sorry, I didn't make myself clear.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.

Aha! Thanks. The black one was the most popular one.

You got yourself your first candidate colour.

Yup, a pretty boring one too.

[TalkingTree]

i need colours that anyone would buy.

How did it go with SPRiT's then? It came in black, blue and white.

SPRiT already had those made. Most of the PCBs atleast.

Sorry, I didn't make myself clear.
I was suggesting to check how well they sold in your group buy. So you can have an idea of what colours are favored.

Aha! Thanks. The black one was the most popular one.

You got yourself your first candidate colour.

Yup, a pretty boring one too.

Black goes on anything, but I'm really wishing for a LeandreN's Orange.

[pichu23]

Oh snap, a GON 60%?
I might be in after all!

[Zambumon]

Filled 

I need a board for the Zealios!

[FoC_Tow]

Definitely in for another gon pcb or two!

Not a huge fan of the orange & black color combo, but any custom color scheme would be pretty hard to resist tbh!

Would Love to see something like White on Gray, or maybe Purple on Gray!

Purple goes with anything as well if you have some Zealios to go along!

On another note, are hhkb style plates still planned?

Acrylic or polycarb hhkb style plates would be really epic to show of dat custom pcb, and make use of the top smd led spots!

[Pinecone]

Filled. I told myself no more buying things because I have FaceW and Satan GH60 PCBS coming... but I can't say no to a GoN, especially at GB rates. WHYYYY 

[Atredl]

Can't pass up on getting a GON 

I'm just a little worried on how long it would take to get fulfilled. I've only heard about how long he takes to fulfill the regular orders. Even if it takes a while I want one!

[TalkingTree]

This is a black NerD 60 v.1.61 and we're getting a v2.0, but it should us an idea how it looks.

[LeandreN]

This is a black NerD 60 v.1.61 and we're getting a v2.0, but it should us an idea how it looks.

Show Image

Thanks !

I will be getting a little custom logo on it also, it seems. Totally unecessery, but why not.

[TalkingTree]

I will be getting a little custom logo on it also, it seems. Totally unecessery, but why not.

See to have it on the backside, so I can admire your avatar through a clear case. 

[TalkingTree]

@LeandreN: you might want to show the default white PCB on the first post as well.

[FoC_Tow]

Can pcb color and color of prints both be custom?

Would a Gray pcb with purple printing even be possible in theory?

Have never seen a gray pcb before, but imagine it to look really sweet.

It's a nice neutral inbeteen as well, since black usually looks way to dark to me personally...

[Dernubenfrieken]

Definitely in for another gon pcb or two!

Not a huge fan of the orange & black color combo, but any custom color scheme would be pretty hard to resist tbh!

Would Love to see something like White on Gray, or maybe Purple on Gray!

Purple goes with anything as well if you have some Zealios to go along!

On another note, are hhkb style plates still planned?

Acrylic or polycarb hhkb style plates would be really epic to show of dat custom pcb, and make use of the top smd led spots!

I wrote white in the form, but white with purple would be a great choice too IMO.

[LeandreN]

Ordered a PCB from GON since i have never owned a Nerd60 V.2 before. Just a plain white one. I am going to take some pictures and figure out the GUI so i can assure the quality 100% myself.

[Lpwl]

Just filled your form ! 

If GON can deliver in "a timely manner" then we're living in the best of all possible worlds - haha 

[Zambumon]

Ordered a PCB from GON since i have never owned a Nerd60 V.2 before. Just a plain white one. I am going to take some pictures and figure out the GUI so i can assure the quality 100% myself.

Will yours be pre soldered?

[LeandreN]

Ordered a PCB from GON since i have never owned a Nerd60 V.2 before. Just a plain white one. I am going to take some pictures and figure out the GUI so i can assure the quality 100% myself.

Will yours be pre soldered?

Yes.

[Vittra]

Filled out the form, definitely interested in 1, possibly 2 sets.

Not going to lie, GON sounds incredibly busy to the point that I am curious at what the actual lead time for this would be.

[toneman77]

As a Linux user: how are NerD PCBs flashed? tmk?

[swimmingbird]

quick question - when you mention the case parts for $80USD are you referring to a GON housing?

If so that seems incredibly cheap

[LeandreN]

Nono. It's a sandwhich case

[chilldude_22]

Big time in for a black Gon PCB. Looking for one to put in my Gon Crystal housing. 

[bloodl1n3]

Haven't even completed my build from round 3, but have always wanted a GON.

Interested in the case that will be available. Is it one that's been produced before or will it be a new custom one?

[LeandreN]

Haven't even completed my build from round 3, but have always wanted a GON.

Interested in the case that will be available. Is it one that's been produced before or will it be a new custom one?

Most likely no case. It would have been a new designed layered case.

[pichu23]

Big time in for a black Gon PCB. Looking for one to put in my Gon Crystal housing. 

I just want a black PCB from GON. 
Got a white one on my FaceW and on my NerD TKL.

[TalkingTree]

I'll surely get two PCBs, eventually a third.

[pichu23]

LeandreN, will you be offering universal plates or just the HHKB style plates for this run?

[LeandreN]

LeandreN, will you be offering universal plates or just the HHKB style plates for this run?

Universal with this. hHKB and Winkeyless in an earlier round or together with this

[pichu23]

LeandreN, will you be offering universal plates or just the HHKB style plates for this run?

Universal with this. hHKB and Winkeyless in an earlier round or together with this

Sweet! Thanks for organising it and making it happen 

[FoC_Tow]

LeandreN, will you be offering universal plates or just the HHKB style plates for this run?

Universal with this. hHKB and Winkeyless in an earlier round or together with this

hhkp plates! F**k Yeah!

Any chance for something acrylic?
(Since gon's pcb supports top mounted smd leds?)

[Dernubenfrieken]

LeandreN, will you be offering universal plates or just the HHKB style plates for this run?

Universal with this. hHKB and Winkeyless in an earlier round or together with this

hhkp plates! F**k Yeah!

Any chance for something acrylic?
(Since gon's pcb supports top mounted smd leds?)

I would also be interested in acrylic plates.

[LXXXIX]

+1 for WKL

Also, I wish this was a TKL PCB + Aluminum plates.

[LeandreN]

Okay updates.

Orange PCB with 50 MOQ

Black PCB with 50 MOQ.

Will have a custom LeandreN silkscreen, because why not?

GON has promised me several times that the orders will go fast, because they don't require his assembly. Some more questions will be asked.


So we will have one neutral black colour for those that are not interested in flashy colours, and we will have the signature orange PCB.

Looks like the price is going to be around 60$ now.

Let me know if you have any questions.

[FoC_Tow]

Why does it have to be a boring standard black? =/

Not a big fan of orange either, so if it stays like this my wallet is safe.

Honestly think a gray pcb would create more interest then black because it's like the best of both worlds. (would be all over gray pcbs)

[LeandreN]

Why does it have to be a boring standard black? =/

Not a big fan of orange either, so if it stays like this my wallet is safe.

Honestly think a gray pcb would create more interest then black because it's like the best of both worlds. (would be all over gray pcbs)

Hi!

Normally PCBs only give you one choice, like in my round 3 GB with white Winkeyless PCBs. I thought I was safe with two colours. One boring plain PCB and one cool orange PCB. In the end, you doesn't even see the PCB. A grey PCB would require another custom colour fee.

Sorry, I can't please everyone, glad that your wallet is safe

[FoC_Tow]

Why does it have to be a boring standard black? =/

Not a big fan of orange either, so if it stays like this my wallet is safe.

Honestly think a gray pcb would create more interest then black because it's like the best of both worlds. (would be all over gray pcbs)

Hi!

Normally PCBs only give you one choice, like in my round 3 GB with white Winkeyless PCBs. I thought I was safe with two colours. One boring plain PCB and one cool orange PCB. In the end, you doesn't even see the PCB. A grey PCB would require another custom colour fee.

Sorry, I can't please everyone, glad that your wallet is safe

I know gon's pcbs usually come in black or white.

After all I currently have a white nerd 60 pcb and crystal case here to build, in which btw you actually would see the pcb.

(Also planning on getting some acrylic hhkb plates cut which would also show parts of it at least on a standard case)


I still think gray would have sparked more interest, but I didn't consider custom color fees.
Will the additional cost be split on both colors or will black be cheaper then orange?
If so what happens when black doesn't reach moq?

I understand that you can't please anyone tho! And even tho I really wished for an epic custom gon, its also kind of nice to save on funds for once.

[amharris]

A GON-based GB would be very nice, albeit not to convenient for me in the near future for personal reasons; but in later rounds, I'd love to see a GON-based 60% GB repeated, if the IC is successful.

I also added to the form, my interest in seeing lubricant added as an optional part of the potential GB, as it's difficult to get a hold of any suitable lubricant in the UK, with ease, let alone the most preferable options.

[chilldude_22]

Okay updates.

Will have a custom LeandreN silkscreen, because why not?

Will the silkscreen be in the place of the NerD logo, or will it be plastered huge like the CTRL ALT PCBs? I never quite understood having someone else's name/logo on your board and the biggest reason to have a special colored PCB is to make it visible in some way (mine will be going in a Gon Crystal case).

If you're accepting feedback, I'd scrap the personal logo or keep it small.

[LeandreN]

Okay updates.

Will have a custom LeandreN silkscreen, because why not?

Will the silkscreen be in the place of the NerD logo, or will it be plastered huge like the CTRL ALT PCBs? I never quite understood having someone else's name/logo on your board and the biggest reason to have a special colored PCB is to make it visible in some way (mine will be going in a Gon Crystal case).

If you're accepting feedback, I'd scrap the personal logo or keep it small.

It is very small

[chilldude_22]

Okay updates.

Will have a custom LeandreN silkscreen, because why not?

Will the silkscreen be in the place of the NerD logo, or will it be plastered huge like the CTRL ALT PCBs? I never quite understood having someone else's name/logo on your board and the biggest reason to have a special colored PCB is to make it visible in some way (mine will be going in a Gon Crystal case).

If you're accepting feedback, I'd scrap the personal logo or keep it small.

It is very small

Great news! Thanks for the prompt response. Consider me all-in for a PCB or two.

[TalkingTree]

Orange PCB with 50 MOQ

Black PCB with 50 MOQ.

I'm in for both.

[ccarlitos2]

I'll be in for a PCB and the winkeyless plate from your other GB will the stabilizers from this GB work with that plate?

[LeandreN]

I'll be in for a PCB and the winkeyless plate from your other GB will the stabilizers from this GB work with that plate?

Yes. PCB mounted stabilisers all the way.

[ccarlitos2]

I'll be in for a PCB and the winkeyless plate from your other GB will the stabilizers from this GB work with that plate?

Yes. PCB mounted stabilisers ask the way.

Awesome thanks for the fast reply! Good luck with the GB

[LeandreN]

I'll be in for a PCB and the winkeyless plate from your other GB will the stabilizers from this GB work with that plate?

Yes. PCB mounted stabilisers ask the way.

Awesome thanks for the fast reply! Good luck with the GB

Thanks!!

[trenzafeeds]

The pcbs just keep getting better

[Pinecone]

Orange PCB with 50 MOQ

This + your orange plate + orange case or acrylic w/ orange LEDs + SA carbon orange alphas = YES
Count me in 

[Numpy]

Can't recommend this GB enough.
Was lucky enough to be part of his round 3 version and Leandre is super duper friendly and responsive.
GB went smoothly and efficiently.
He accidentally missed a stabiliser wire in my order and promptly sent me another without any shipping cost.

I r8 88/8

[toneman77]

In case my question got buried... Anyone knows if there is a way to flash the PCB under Linux? the Nerdy Gui looks like windows only...

[xondat]

Not taking part in this round but I can reassure anyone that takes part will enjoy the smoothness of the ride. It's like a Rolls Royce. GLW R4

[Lpwl]

In case my question got buried... Anyone knows if there is a way to flash the PCB under Linux? the Nerdy Gui looks like windows only...

This thread might help you on this specific subject (GON PCBs & Linux).

[pichu23]

LeandreN, will the universal plate require an IC like the winkeyless, hhkb ones or would it be a gb straight together with the pcbs?

[chilldude_22]

Have you thought about offering Gon's Bluetooth kits?

[LeandreN]

LeandreN, will the universal plate require an IC like the winkeyless, hhkb ones or would it be a gb straight together with the pcbs?

The universal plates are already known. They will not require an IC.

[skaloola]

anyway to use RGB side leds on gons pcbs?

[pichu23]

LeandreN, will the universal plate require an IC like the winkeyless, hhkb ones or would it be a gb straight together with the pcbs?

The universal plates are already known. They will not require an IC.

 

[FoC_Tow]

anyway to use RGB side leds on gons pcbs?

I don't think thats possible unfortunately skaloola. RGB leds require a controller, additional leads and compatible firmware.

Gon's pcbs have other advantages tho like the possibility to use smd leds on top of the pcb,  an additional bluetooth module, and the overall top notch quality of gon's parts!

[axtran]

If you can get a GON NerD 60 PCB in Black, I am SO in.

[LeandreN]

Hi, the sample PCB arrived today.
GON sent some stickers. I think he wants me to have this as an option, as he wants to sell those.



Thickness is good. Looks like it's 1,5cm.


Well soldered controller parts.


Solid sockets and well mounted diodes.


Great PCB, I will do some firmware testing and case fitting.

[ccarlitos2]

Hi, the sample PCB arrived today.
GON sent some stickers. I think he wants me to have this as an option, as he wants to sell those.

Show Image

Thickness is good. Looks like it's 1,5cm.

Show Image

Well soldered controller parts.

Show Image

Solid sockets and well mounted diodes.

Show Image

Great PCB, I will do some firmware testing and case fitting.

Looking good

[lashiel]

GoN hypu

[pichu23]

Hi, the sample PCB arrived today.
GON sent some stickers. I think he wants me to have this as an option, as he wants to sell those.

Show Image

Thickness is good. Looks like it's 1,5cm.

Show Image

Well soldered controller parts.

Show Image

Solid sockets and well mounted diodes.

Show Image

Great PCB, I will do some firmware testing and case fitting.

GON's pcb is the bomb. NerD UI is so user friendly 

[Kalp1]

Hello, first post there. Would you find it messy to put this beauty in a cheap 60% case from Ali/Tao ?

[pichu23]

Hello, first post there. Would you find it messy to put this beauty in a cheap 60% case from Ali/Tao ?

Do you have a picture of it?
I'm putting mine in one of these alu case:

Got them from Pexon awhile back. 

[Kalp1]

Hello, first post there. Would you find it messy to put this beauty in a cheap 60% case from Ali/Tao ?

Do you have a picture of it?

It really looks cheap but it is a good start. Nice black alu case by the way.

[pichu23]

Hello, first post there. Would you find it messy to put this beauty in a cheap 60% case from Ali/Tao ?

Do you have a picture of it?

Show Image

Show Image

It really looks cheap but it is a good start. Nice black alu case by the way.

Ah, those are Poker plastic cases that usually comes with the keyboards.
Mine is literally the same just that it is aluminium.
Don't worry, the all clear one seems pretty decent if you're planning on blinging your board. 

[lashiel]

FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)

[pichu23]

FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)

Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb.  )

[Kalp1]

FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)

Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb.  )

Thank you for your informative answer.

[Jumie]

FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)

Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb.  )

Thank you for your informative answer.

The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.

[pichu23]

FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)

Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb.  )

Thank you for your informative answer.

The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.

I think the other person meant if he wants to have smd leds at the bottom of the pcb he would need to modify the case as the ridges are blocking the empty spaces.
The alu case from pexon is identical to the plastic case. Only difference is the material iinm.

[Brammm87]

Looks like a good home for my Zealios. In.

[Kalp1]

FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)

Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb.  )

Thank you for your informative answer.

The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.

I think the other person meant if he wants to have smd leds at the bottom of the pcb he would need to modify the case as the ridges are blocking the empty spaces.
The alu case from pexon is identical to the plastic case. Only difference is the material iinm.

Yes, i'll go with smd leds, but finally I prefer to put more $$ in a frosted acrylic case like Tex CNC or Dulphin's (if he still have some)

[pichu23]

FYI, those cases may not work without some modification. The under glow parts on GON and WKL PCBs often make them incompatible with some cases (in general, anything with ridges seems to not work, from what I've heard)

Yeah, he might have to break them off and sand them down if he wants the underglow.
I thought my case was not compatible with the pcb as the picture of the usb port shown was on the right side.
Then I realised the picture was actually the underside of the pcb.  )

Thank you for your informative answer.

The cheap Aliexpress case shown above is compatible with gon/winkeyless pcb. U wont need any dremelling with that case as I also built mine with that case. I'll post the pic later as I'm on my phone atm. Regardless, u should be good to go with that case. But no idea with the alu case from pexon.

I think the other person meant if he wants to have smd leds at the bottom of the pcb he would need to modify the case as the ridges are blocking the empty spaces.
The alu case from pexon is identical to the plastic case. Only difference is the material iinm.

Yes, i'll go with smd leds, but finally I prefer to put more $$ in a frosted acrylic case like Tex CNC or Dulphin's (if he still have some)

The TEX acrylic case is a good choice. Looks elegant with smd LEDs.

[mastermachetier]

Do you need a plate with these pcbs or can you just mount directly on the pcb and put it and a case and go ? Also does this pcb only accept cherry switches ?

[TalkingTree]

Do you need a plate with these pcbs?

No but a plate would increase stability and give you a better overall feel.

does this pcb only accept cherry switches ?

Cherry and Cherry clones. ALPS switches have a different pins position.

[LeandreN]

https://geekhack.org/index.php?topic=79568.0

This GB will not delay any orders in GONs workshop.

[Liam]

This gb come black n orange only or it still have the solid white one?

[LeandreN]

This gb come black n orange only or it still have the solid white one?

Black or orange. No white option.

[Liam]

This gb come black n orange only or it still have the solid white one?

Black or orange. No white option.

Done to me

[LeandreN]

This gb come black n orange only or it still have the solid white one?

Black or orange. No white option.

Done to me

I do appericate your input anyway. Thanks.

[axtran]

Best GB leader I've been a buyer for Highly anticipating where this GB is going

[TalkingTree]

Black or orange. No white option.

I'll definetely get one of each, eventually a third PCB.

[LeandreN]

Black or orange. No white option.

I'll definetely get one of each, eventually a third PCB.

You need them all 

[LeandreN]

Best GB leader I've been a buyer for Highly anticipating where this GB is going

Thanks a lot Axtran!

[Pinecone]

Can't wait for this to launch! Been wanting a GoN for a while now 
Will you be offering any of his cases? (Crystal, Acrylic, etc.) or will I need to source my own?

[LeandreN]

Can't wait for this to launch! Been wanting a GoN for a while now 
Will you be offering any of his cases? (Crystal, Acrylic, etc.) or will I need to source my own?

You will need to source your own cases. This is running the traditional PCB, stabilisers and plates style. I like to keep GBs as fast and simple as possible.

[Pinecone]

Can't wait for this to launch! Been wanting a GoN for a while now 
Will you be offering any of his cases? (Crystal, Acrylic, etc.) or will I need to source my own?

You will need to source your own cases. This is running the traditional PCB, stabilisers and plates style. I like to keep GBs as fast and simple as possible.

Understandable, thanks for the fast reply! Looks like I got some dremeling to do on the TEX case people mentioned on the last page of comments 

[TalkingTree]

LeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.

[ccarlitos2]

Has anyone tried this PCB with one of Ziptyze's z-cases?

[feediko]

In for 1 or 2 PCBs + plates aswell.
Anyone knows if it would fit a stock pok3r aluminium case?

[Ephemeral]

Filled. This looks great, I'll be looking forward to seeing this happen. 

[axtran]

Has anyone tried this PCB with one of Ziptyze's z-cases?

Ziptyze states that it fits. I soldered on all Side LEDs on my old one and it had clearance issues.

[axtran]

In for 1 or 2 PCBs + plates aswell.
Anyone knows if it would fit a stock pok3r aluminium case?

Yes, if you do not solder on Side LEDs. No if you do.

[TalkingTree]

Thank you too mate. 

[LeandreN]

Show Image

Thank you too mate.  :thumb:

You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.

[TalkingTree]

Show Image

Thank you too mate.  :thumb:

You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.

It was definetely unexpected and a big surprise, I really appreciated it and it looks great, it has a nice texture and it's Cherry profile (Signature Plastic DCS I assume) which is my favourite.
I'm intrigued, how many others got this present?

[LeandreN]

Show Image

Thank you too mate.  :thumb:

You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.

It was definetely unexpected and a big surprise, I really appreciated it and it looks great, it has a nice texture and it's Cherry profile (Signature Plastic DCS I assume) which is my favourite.
I'm intrigued, how many others got this present?

I gave one away in a mechmarket package I sent a while back and skiwithpete has one.

[TalkingTree]

Show Image

Thank you too mate.  :thumb:

You have been pretty supportive in my GB treads and helped a lot of people out. Thanks.

It was definetely unexpected and a big surprise, I really appreciated it and it looks great, it has a nice texture and it's Cherry profile (Signature Plastic DCS I assume) which is my favourite.
I'm intrigued, how many others got this present?

I gave one away in a mechmarket package I sent a while back and skiwithpete has one.

Cool. Thanks again.  ;D

[DALExSNAIL]

Just wondering, and hope it isnt too off topic, but the 60% crystal gon case people are talking about, is it still available?

[W_hinklebottom]

I could make this into a HHKB layout correct? Just the plate would look a little wonky. Does GON sell just plates?

[TalkingTree]

I could make this into a HHKB layout correct?

There's a group buy for HHKB plates, also run by LeandreN.

Does GON sell just plates?

PCBs and accessories too.

You can combine GON PCB and HHKB-like plate (more info here) to achieve your goal.

[W_hinklebottom]

I could make this into a HHKB layout correct?

There's a group buy for HHKB plates, also run by LeandreN.

Does GON sell just plates?

PCBs and accessories too.

You can combine GON PCB and HHKB-like plate (more info here) to achieve your goal.

Found the other Group buy now I am really excited 

[LeandreN]

I am done with testing my GON Nerd60 PCB so i will sell it for 94$ shipped if anyone wants. (This is what I paid including shipping).

[TalkingTree]

LeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.

[LeandreN]

LeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.

He is busy upgrading the PCB. I doubt it

[TalkingTree]

LeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.

He is busy upgrading the PCB. I doubt it

Alright, thanks anyway.

[LeandreN]

I am going to put the PCB on mechmarket if none of you guys want it.

[Vittra]

pm'd

[DALExSNAIL]

LeandreN, any chance we (or actually I) can get a Gonpad through this GB, even at retail price? I just need it.

He is busy upgrading the PCB. I doubt it

What about an orange TKL pcb? 

[pichu23]

This gb come black n orange only or it still have the solid white one?

Black or orange. No white option.

What option is this for again?
The pcb colour?

[Liam]

This gb come black n orange only or it still have the solid white one?

Black or orange. No white option.

What option is this for again?
The pcb colour?

Hope he continues with white If he doesn't maybe I have to go with orange anyway.

[TalkingTree]

This gb come black n orange only or it still have the solid white one?

Black or orange. No white option.

What option is this for again?
The pcb colour?

PCB indeed.

[grav3serker]

I'll be in for a black PCB! 

[flopix]

My preferences in order: white, black, orange 

[azhdar]

I could be interested in this.

[megaforce]

Possible ETA on the start date of the GB? Interested in 2-3 PCBs + plates regardless of color.

[LeandreN]

White on the black PCB and black on the orange PCB.

[pichu23]

Show Image

White on the black PCB and black on the orange PCB.

Is the logo confirmed to be silk screened to the pcb?
Too cute!  ^______^
I'm down for a white on black pcb!

[Atredl]

Will this PCB fit in a TEX Aluminum?

Obviously, I don't plan on using the bottom mounted LED's.

[pichu23]

Will this PCB fit in a TEX Aluminum?

Obviously, I don't plan on using the bottom mounted LED's.

The render posted by Leandren seems to show that the holes for screw would match the poker ones.
So assuming the TEX case uses the standard poker layout screws, it should be fine.

[Jumie]

Launch ETA?

[Atredl]

Will this PCB fit in a TEX Aluminum?

Obviously, I don't plan on using the bottom mounted LED's.

The render posted by Leandren seems to show that the holes for screw would match the poker ones.
So assuming the TEX case uses the standard poker layout screws, it should be fine.

It uses the Poker screw hole layout but I was more worried about things like the ridges on the case getting in the way of things like the controller.

I have no problem using a dremel on my acrylic TEX but I would rather leave my Aluminum TEX pretty if possible. (Inside and out  ))

[axtran]

GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

[Bumbibear]

GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

Is there any other type of aluminium case that is rather simple to acquire that you know would fit ?

[axtran]

GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

Is there any other type of aluminium case that is rather simple to acquire that you know would fit ?

Find any case without ridges, really. The MassDrop cast aluminum cases work, or the cases on Amazon right now also work (I think they're called iQunix Lambo cases).

[chilldude_22]

GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.

[Bumbibear]

GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

Is there any other type of aluminium case that is rather simple to acquire that you know would fit ?

Find any case without ridges, really. The MassDrop cast aluminum cases work, or the cases on Amazon right now also work (I think they're called iQunix Lambo cases).

Sweet! Found this one: http://dro.ps/b/eBi1m6F

Thank you!

[pichu23]

GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.

Yeah, what he said. As long as there is not smd leds at the bottom, it should fit the alu case just fine

[axtran]

All I'm saying is why buy GON PCB of you don't go all rainbow lightshow?

[pichu23]

All I'm saying is why buy GON PCB of you don't go all rainbow lightshow?

Already have a NerD TKL with an acrylic case for that 
The 60% would be for something else 

[Chewypost]

Would 65% ever be an option? :0

[Pinecone]

What SMD LED size would best fit the PCB?

[Ludovician]

Would 65% ever be an option? :0

Have you checked out the Clueboard?

[axtran]

What SMD LED size would best fit the PCB?

1206 SMD.

[Atredl]

GON's Side LEDs and extra electronics won't let the PCB be an immediate fit into a Tex Aluminum case. You'll want to use the acrylic and modify it. The screw holes fit as asked though.

I've put a Gon PCB in a TEX Aluminum case no problem. Granted I didn't use any bottom SMD LEDs, but I don't know why you would want to.

This is exactly what I needed to hear Count me in for a PCB in black 

[Chewypost]

Would 65% ever be an option? :0

Have you checked out the Clueboard?

I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.
.

I've seen some Korean boards like this, but wanted to see if other places had it too.

[eksuen]

Would 65% ever be an option? :0

Have you checked out the Clueboard?

I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.

Show Image

.

I've seen some Korean boards like this, but wanted to see if other places had it too.

https://geekhack.org/index.php?topic=77434.0;topicseen

The buy already ran on Massdrop, but you may be able to pick one up second-hand.

[Chewypost]

Would 65% ever be an option? :0

Have you checked out the Clueboard?

I have actually, but I'm more looking more for something with 4 keys along the side of the layout like this.

Show Image

.

I've seen some Korean boards like this, but wanted to see if other places had it too.

https://geekhack.org/index.php?topic=77434.0;topicseen

The buy already ran on Massdrop, but you may be able to pick one up second-hand.

Yah I saw that too. Looks beautiful and form is just what I wanted. I'm just looking into whether or not I can make a custom case for it and add some LED for the switches and for some underglow (rgb underglow).

[The_Skynacho]

This is great, I am in for a PCB and plate. My case and zealios have been unused for too long. 

[Edited for clarity]

[grav3serker]

Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

[chilldude_22]

Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.

[grav3serker]

Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.

So what LEDs can I use for the bottom? The SMDs from GON?

[chilldude_22]

Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.

So what LEDs can I use for the bottom? The SMDs from GON?

Yeah, they're standard 1206 SMD LEDs. You can get them on eBay for pretty cheap.

[grav3serker]

Would the RGB LEDs from Winkeyless work on the bottom of the board? If so, what would I need? Resistors come pre-soldered, right?

No, they won't work. Resistors and diodes will be pre-soldered if I remember right.

So what LEDs can I use for the bottom? The SMDs from GON?

Yeah, they're standard 1206 SMD LEDs. You can get them on eBay for pretty cheap.

Thanks a bunch!

[Fullcream]

Hello, I'm sorry that I don't know anything. All I want to do is buy parts to build a hhkb layout board and want to be able to put LEDs through the switches and in to the pcb.
(short right shift, 2x1u instead of the standard 2u backspace on top row, bottom row: 1u/1.5u/7u/1.5u/1u, and stepped caps would be nice.)
So I guess I need a pcb, plate, and stabilizers. Am I in the right place?

[Jumie]

Hello, I'm sorry that I don't know anything. All I want to do is buy parts to build a hhkb layout board and want to be able to put LEDs through the switches and in to the pcb.
(short right shift, 2x1u instead of the standard 2u backspace on top row, bottom row: 1u/1.5u/7u/1.5u/1u, and stepped caps would be nice.)
So I guess I need a pcb, plate, and stabilizers. Am I in the right place?

You are.. Stay tune

[Fullcream]

thanks m8.

[LeandreN]

Hi. Sorry for the lack of updates. I'm going to merge the winkeyless and HHKB buy into this one. Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want. Still waiting for samples...

LeandreN

[TalkingTree]

Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want.

Will you handle merging the orders? I wanna add things from this IC to the HHKB plate I ordered.
Also, ETA on this GB?

[LeandreN]

Any orders for winkeyless and HHKB plates can be edited or cancelled now if you want.

Will you handle merging the orders? I wanna add things from this IC to the HHKB plate I ordered.
Also, ETA on this GB?

No ETA yet. Need the samples and then shortly after, the GB will start.

I will probably delete orders and send a message to everyone to refill the form. I know this is very inconvenient, but it is way easier for me.

[TalkingTree]

I will probably delete orders and send a message to everyone to refill the form. I know this is very inconvenient, but it is way easier for me.

Yeah, that looks like the safest and easiest way.

[endeavour90]

Hi, I am new to custom keyboard.
I checked the GON website, it offers Nerdy GUI to customize the keyboard layout but it is only available on windows.
Is there a similar software to edit keyboard layout in mac osx?
I don't really mind if it does not have the friendly interface, but getting a windows computer to edit the layout is too much for me  .

[LeandreN]

Hi, I am new to custom keyboard.
I checked the GON website, it offers Nerdy GUI to customize the keyboard layout but it is only available on windows.
Is there a similar software to edit keyboard layout in mac osx?
I don't really mind if it does not have the friendly interface, but getting a windows computer to edit the layout is too much for me  .

The software is Windows only. I checked this up for someone a couple of weeks ago. Unfortunate for for people who use OSX exclusively.

[LeandreN]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

[grav3serker]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

We'll be able to buy just plates still, right?

[LeandreN]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

We'll be able to buy just plates still, right?

Yes

[TalkingTree]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

[LeandreN]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.

[TalkingTree]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.

Roger that. Will the new form include orders for PCBs and universal plates as well?

[LeandreN]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.

Roger that. Will the new form include orders for PCBs and universal plates as well?

Correct

[TalkingTree]

jump over here

https://geekhack.org/index.php?topic=79315.msg2037225#msg2037225

The form is still for HHKB and Winkeyless plates. Did you clear the (pre)orders or do you still have them?

The submissions will be deleted. I will message everyone that entered.

Roger that. Will the new form include orders for PCBs and universal plates as well?

Correct

You're mighty awesome, as always.

[bnthor]

I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.

[LeandreN]

I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.

Of course. ISO is the only layout!

I'm nice to include ANSI support.

[bnthor]

I'm in for a black plate and a black PCB, I just need to know, does the PCB is ISO compatible ?
OR even two of both... In that case one of the plates would be Red.

Of course. ISO is the only layout!

I'm nice to include ANSI support.

haha Great  then I'm definitely in !

[bnthor]

Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with

• Poker/ Poker X/ Poker 2
• GH60
• Pure/ Pure Pro
• Ducky Mini (MK1 only)
• V60 (with 3 screws affixed)

[pichu23]

Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with

• Poker/ Poker X/ Poker 2
• GH60
• Pure/ Pure Pro
• Ducky Mini (MK1 only)
• V60 (with 3 screws affixed)

Show Image

It will work only if you're not soldering the smd leds but other than that, should be fine.

[bnthor]

Sorry I'm a bit of a noob... but the Gon PCB should fit in there right ? it's said being compatible with

• Poker/ Poker X/ Poker 2
• GH60
• Pure/ Pure Pro
• Ducky Mini (MK1 only)
• V60 (with 3 screws affixed)

Show Image

It will work only if you're not soldering the smd leds but other than that, should be fine.

THX!