NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
Quote from: UsualSuspectXXX on Wed, 08 June 2016, 22:07:39Quote from: bazh on Wed, 08 June 2016, 21:59:12So for the assembly and parts content order, we're planning this:- PCB will be $68 kit from winkeyless- 100 LEDs ($5)- 70 switches ($0.75 each)What else are we missing? :-?Oh right, looking into stab too75¢ per switch, even for Gaterons? If this is the case, I don't think I'm going to do full assembly anymore. Edit: You're ordering PCBs from Winkeyless, Cherry switches are max $0.70 from them, and Gaterons are $0.50 max (most of which are $0.33). Where did the price of $0.75 come from?Sorry for not clarify, 0.75$ is the price for Zealios since the order for Zealios are the most quantity I forgot about other user with Gateron and Cherry MX Gateron and Cherry MX mostly will be cheaper than you suggest
Quote from: bazh on Wed, 08 June 2016, 21:59:12So for the assembly and parts content order, we're planning this:- PCB will be $68 kit from winkeyless- 100 LEDs ($5)- 70 switches ($0.75 each)What else are we missing? :-?Oh right, looking into stab too75¢ per switch, even for Gaterons? If this is the case, I don't think I'm going to do full assembly anymore. Edit: You're ordering PCBs from Winkeyless, Cherry switches are max $0.70 from them, and Gaterons are $0.50 max (most of which are $0.33). Where did the price of $0.75 come from?
So for the assembly and parts content order, we're planning this:- PCB will be $68 kit from winkeyless- 100 LEDs ($5)- 70 switches ($0.75 each)What else are we missing? :-?Oh right, looking into stab too
Sandblasted test piece are back. It's as good as expected Show ImageShow Image
@Bazh, will the aluminium stands be compatible with other cases like Tex aluminium case?
Quote from: Skydra on Thu, 09 June 2016, 00:24:23@Bazh, will the aluminium stands be compatible with other cases like Tex aluminium case?It can be if you able to drill 4 x 4mm holes with countersink for M4 screw. Or using two side adhesive sticker...
Quote from: foggyflute on Thu, 09 June 2016, 02:52:49Sandblasted test piece are back. It's as good as expected Show ImageShow ImageLooks really nice!I haven't received any invoice yet, should I be worried about that, or is the invoicing still in progress?
Sorry for not clarify, 0.75$ is the price for Zealios since the order for Zealios are the most quantity I forgot about other user with Gateron and Cherry MX Gateron and Cherry MX mostly will be cheaper than you suggest
Quote from: foggyflute on Thu, 09 June 2016, 02:52:49Sandblasted test piece are back. It's as good as expected Show ImageShow ImageThat looks amazing? Just a question to clarify, is sandblasted and frosted the same thing?
Quote from: foggyflute on Thu, 09 June 2016, 02:52:49Sandblasted test piece are back. It's as good as expected Show ImageShow ImageLooks great. Wonder if you can make some that is compatible with Weaven as back plate?
Quote from: Geekmie on Thu, 09 June 2016, 08:25:35Quote from: foggyflute on Thu, 09 June 2016, 02:52:49Sandblasted test piece are back. It's as good as expected Show ImageShow ImageLooks great. Wonder if you can make some that is compatible with Weaven as back plate?+1
Guess I should have asked this before, but the Gaterons are the RGB ones with the clear switch tops, right?
Quote from: UsualSuspectXXX on Fri, 10 June 2016, 08:21:56Guess I should have asked this before, but the Gaterons are the RGB ones with the clear switch tops, right?Well, all of them are milky bottom with clear top but not have space for SMD rgb LED below like cherry RGB, they have a version with 4 pin rgb LED as I remember. I will need to check back if that's what you need.
Quote from: foggyflute on Fri, 10 June 2016, 09:30:42Quote from: UsualSuspectXXX on Fri, 10 June 2016, 08:21:56Guess I should have asked this before, but the Gaterons are the RGB ones with the clear switch tops, right?Well, all of them are milky bottom with clear top but not have space for SMD rgb LED below like cherry RGB, they have a version with 4 pin rgb LED as I remember. I will need to check back if that's what you need.That's perfect since I'll be installing sip sockets. I just want to have the clear switch tops. I sent a PM too bazh about a tweak to my order but I can't remember who was actually handling the invoices.
Quote from: UsualSuspectXXX on Fri, 10 June 2016, 09:59:17Quote from: foggyflute on Fri, 10 June 2016, 09:30:42Quote from: UsualSuspectXXX on Fri, 10 June 2016, 08:21:56Guess I should have asked this before, but the Gaterons are the RGB ones with the clear switch tops, right?Well, all of them are milky bottom with clear top but not have space for SMD rgb LED below like cherry RGB, they have a version with 4 pin rgb LED as I remember. I will need to check back if that's what you need.That's perfect since I'll be installing sip sockets. I just want to have the clear switch tops. I sent a PM too bazh about a tweak to my order but I can't remember who was actually handling the invoices.Either bazh or pear_voz, pm me if you need help with technical stuff.
Either bazh or pear_voz, pm me if you need help with technical stuff.
Quote from: foggyflute on Fri, 10 June 2016, 10:07:13Either bazh or pear_voz, pm me if you need help with technical stuff.Can you make sandblasted acrylic back plate for Weaven as an option instead of CF?
Quote from: Geekmie on Fri, 10 June 2016, 10:11:00Quote from: foggyflute on Fri, 10 June 2016, 10:07:13Either bazh or pear_voz, pm me if you need help with technical stuff.Can you make sandblasted acrylic back plate for Weaven as an option instead of CF?I will need to test the 1.5mm acrylic to see if it sturdy enough first, it really easy to crack and we also have to press the pcb down to the back plate with the anti-slip mat in between, that's how it was designed. Maybe an acrylic plate under skeletonized carbon/steel frame or cut out for led diffuse. I will working on that.
so how far are we on billing? excitied to see mine come in
Quote from: mattycee on Sat, 11 June 2016, 02:30:22so how far are we on billing? excitied to see mine come in YGPM
I'd be interested in adding a set of orange stands to my order also.
Did Orange make it for production? If so I would like to change my Order to Orange, I just ordered an Overcast keycap set from massdrop and would like the case to match.
Quote from: JDragon on Sun, 12 June 2016, 14:00:08I'd be interested in adding a set of orange stands to my order also.Quote from: teemo on Sun, 12 June 2016, 11:42:00Did Orange make it for production? If so I would like to change my Order to Orange, I just ordered an Overcast keycap set from massdrop and would like the case to match.Orange did make it into final. We will have some surplus for final QC, I will notice you guys about that after checking our inventory in a few next days.If there's no surplus, we will order more raw materials and do an extended run right after current one finish CNC
still waiting on the update invoice, should i cancel the current one?
Quote from: Khuya on Tue, 14 June 2016, 20:36:27still waiting on the update invoice, should i cancel the current one?That's what bazh had me do, so most likely.
Updated: All PCB purchased today! Also stabs and LEDs are all en routeShow Image