Author Topic: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Shipped!]  (Read 17362 times)

0 Members and 1 Guest are viewing this topic.

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
(RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Shipped!]
« on: Sat, 13 August 2016, 23:30:17 »
The buying period is now over. Thanks to all who participated

Greetings,

After much hard work I am finally able to offer you guys Aluminium Row 3 SA keycaps. It was extremely difficult to get at this price so I hope you enjoy.

The groupbuy will be run over here: http://www.gb.mech.market/?product=aluminium-keycap-group-buy

I am currently based in Australia so shipping costs are based off that. It's a $13 flat rate World wide + $0.35 per 7g. This means if you order 50 caps shipping will be $30.50 ( 13+(0.35*50)=shipping ) if you live in Australia, however, $10 flat rate is offered.

The MoQ is 100 caps. It is currently 259/100

The timeframe for shipping will be definitely before Christmas. The Order will be placed as soon as the GB is over. It will then take 2-4 weeks for manufacturing. Once manufacturing is complete I will receive the caps. Package them and send them off to you guys.

  • It is $4.99USD per cap. This is a great improvement over what usually would cost $20.
  • The caps are low tolerance milled, meaning that each and every cap should be very similar.
  • The caps are lightly sandblasted
  • The caps are also anodised (clear) to protect from wear.
  • 1u size
  • 7g in weight each
  • Row 3 SA Profile
  • Caps are blanks

A Video of the prototype caps can be found here





I hope you enjoy them and feel free to ask away.

A message from KingRama
Designed by RAMA – www.rama.works.

NOTE: This is not a release of an official RAMA cap, but a collaborative effort between ZISB(Invyr) and RAMA to bring to the community low cost SA profile key caps. This is separate from the work that RAMA produces out of RAMA WORKS and will differ in its presentation and packaging.

also for the warning/note:

Unfortunately, not all Cherry MX Stems are made equal. The stem cross for each switch type vary heavily. You will find that the precisely dimensioned RAMA SA 3 (WHITELABEL) will fit perfectly on some switches, and very loosely on others.

In the event of a loose fitting cap, place a piece of tape across the stem and push onto the switch. This will act as a shim to fill the gap between the cross and the stem.
« Last Edit: Tue, 11 October 2016, 18:20:40 by zisb »

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #1 on: Sun, 14 August 2016, 21:36:30 »
Approval bump!

Offline Shados

  • Posts: 129
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #2 on: Sun, 14 August 2016, 21:38:30 »
And now I kinda want a board with full aluminium keycaps. Not at >500 USD though :(.

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #3 on: Sun, 14 August 2016, 21:41:46 »
That's as good as I could get it. Otherwise it would be $2000 with most manufacturers.  :(

Offline Shados

  • Posts: 129
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #4 on: Sun, 14 August 2016, 21:46:51 »
That sucks, I'd be tempted to go for it if it were more like $200.

Offline Khuya

  • Posts: 91
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #5 on: Mon, 15 August 2016, 00:51:21 »
so tempting to get 60%, but can't afford..

Offline Data

  • Posts: 2606
  • Location: Orlando, FL
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #6 on: Mon, 15 August 2016, 07:56:43 »
Waiting for someone to fill a Planck with these.  :))

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #7 on: Mon, 15 August 2016, 08:54:57 »
That, I would love to see!

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2465
  • Location: Orlando
  • Hmmmm beer.
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #8 on: Mon, 15 August 2016, 11:11:10 »
Going to pick up some of these, what are the chances of Titanium in the future?
VE.A 67g Zealios | GH60 MX Clears |

Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #9 on: Mon, 15 August 2016, 12:28:51 »

Hey man, I talked to you briefly over at reddit, but I'm curious if I buy a few caps, could I arrange for my orders to be un-anodised? (from the Reddit thread, these were to be anodised but the oxide layer will not be dyed i.e. just clear anodise).

Asking as I would like to try and get a few and find a local coating shop to anodise them in different colours to match the SA sets I have, and I'm not sure if caps can be re-anodised without abrading away the factory-anodised layer.

Let me know!  :thumb:
« Last Edit: Mon, 15 August 2016, 17:01:23 by duynguyenle »
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #10 on: Mon, 15 August 2016, 16:16:12 »
Going to pick up some of these, what are the chances of Titanium in the future?
Theres definitely a chance, however it is much more expensive to mill and manufacture titanium.

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #11 on: Mon, 15 August 2016, 18:01:55 »

Hey man, I talked to you briefly over at reddit, but I'm curious if I buy a few caps, could I arrange for my orders to be un-anodised? (from the Reddit thread, these were to be anodised but the oxide layer will not be dyed i.e. just clear anodise).

Asking as I would like to try and get a few and find a local coating shop to anodise them in different colours to match the SA sets I have, and I'm not sure if caps can be re-anodised without abrading away the factory-anodised layer.

Let me know!  :thumb:
Hey man. I will have a quick chat with my manufacturer and see if some can just be set aside. It shouldnt be a problem since anodising is usually last.

Offline Zealousy

  • Posts: 89
  • Location: Bay Area
    • Twitter
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #12 on: Tue, 16 August 2016, 00:45:11 »
I'm in for one! Looking forward to seeing how it turns out!

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #13 on: Tue, 16 August 2016, 03:12:55 »

Hey man, I talked to you briefly over at reddit, but I'm curious if I buy a few caps, could I arrange for my orders to be un-anodised? (from the Reddit thread, these were to be anodised but the oxide layer will not be dyed i.e. just clear anodise).

Asking as I would like to try and get a few and find a local coating shop to anodise them in different colours to match the SA sets I have, and I'm not sure if caps can be re-anodised without abrading away the factory-anodised layer.

Let me know!  :thumb:

Okay I had a chat and that's no problem at all! Just PM me when you have placed your order and the quantity ordered (just to confirm) and I will leave a note for the manufacturer.

Offline 27

  • Posts: 750
  • Location: Ottawa, Ontario, Canadeh
  • The Maple Man
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #14 on: Tue, 16 August 2016, 22:20:18 »
Really like these, but I don't really like SA.  Any chance of them happening in Cherry profile eventually?
« Last Edit: Tue, 16 August 2016, 22:38:05 by 27 »
IG: https://www.instagram.com/27mechs/                                        Website: http://www.mech27.com/

Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #15 on: Wed, 17 August 2016, 04:03:39 »

Hey man, I talked to you briefly over at reddit, but I'm curious if I buy a few caps, could I arrange for my orders to be un-anodised? (from the Reddit thread, these were to be anodised but the oxide layer will not be dyed i.e. just clear anodise).

Asking as I would like to try and get a few and find a local coating shop to anodise them in different colours to match the SA sets I have, and I'm not sure if caps can be re-anodised without abrading away the factory-anodised layer.

Let me know!  :thumb:

Okay I had a chat and that's no problem at all! Just PM me when you have placed your order and the quantity ordered (just to confirm) and I will leave a note for the manufacturer.

Thanks man, I'll make an order later after work and let you know my order number.
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #16 on: Fri, 19 August 2016, 23:37:10 »
That made me giggle. I just did a quick count and there are 99 that have been ordered. Just need one more to hit that MoQ  :))

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #17 on: Sat, 20 August 2016, 00:22:12 »
MoQ Has been hit  :eek:

Thanks everyone who joined in to the sale! For those who haven't, dont worry you still have about 6 days left.

Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #18 on: Sat, 20 August 2016, 06:39:39 »
MoQ Has been hit  :eek:

Thanks everyone who joined in to the sale! For those who haven't, dont worry you still have about 6 days left.

Zisb I sent you a PM about my order  :thumb:
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline milchek

  • Posts: 73
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #19 on: Sun, 21 August 2016, 22:55:02 »
Just joined, first group buy purchase off this forum! ;D

EDIT: Hmm seems I spoke too soon. There seems to be an error with checkout?

"This recipient is currently unable to receive money."

I'll PM you.
« Last Edit: Sun, 21 August 2016, 23:00:00 by milchek »

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #20 on: Mon, 22 August 2016, 01:03:38 »
Hey guys. Checkout will be down for today. I just have to wait for paypal to verify my information (Again  :eek:). Ill keep you updated.

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #21 on: Mon, 22 August 2016, 16:13:01 »
Alright, the store is functioning again. Sorry about that everyone.

Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #22 on: Mon, 22 August 2016, 16:31:10 »
Alright, the store is functioning again. Sorry about that everyone.

Hey Zisb I'm the one who asked about getting some of the caps in my order in a raw non-anodised form, I think I sent you a PM but wasn't sure, could you confirm?

Thanks!  :thumb:
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #23 on: Mon, 22 August 2016, 18:08:13 »
Alright, the store is functioning again. Sorry about that everyone.

Hey Zisb I'm the one who asked about getting some of the caps in my order in a raw non-anodised form, I think I sent you a PM but wasn't sure, could you confirm?

Thanks!  :thumb:

Yep confirmed  :thumb:

Sorry it has been a busy weekend  :eek:

Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #24 on: Mon, 22 August 2016, 18:27:33 »
Alright, the store is functioning again. Sorry about that everyone.

Hey Zisb I'm the one who asked about getting some of the caps in my order in a raw non-anodised form, I think I sent you a PM but wasn't sure, could you confirm?

Thanks!  :thumb:

Yep confirmed  :thumb:

Sorry it has been a busy weekend  :eek:

No worries man! Glad we made MOQ, looking forward to seeing this made!
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline KingRama

  • * Maker
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #25 on: Tue, 23 August 2016, 20:58:01 »


Very excited for this Zisb.

Zisb sent me one of the prototypes and I can confirm that it feels amazing.

Here's a video of the sound difference, very satisfying!
https://www.instagram.com/p/BGbelG0B6sD/?taken-by=ramaworks
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline milchek

  • Posts: 73
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #26 on: Wed, 24 August 2016, 05:10:34 »
Here's a video of the sound difference, very satisfying!
https://www.instagram.com/p/BGbelG0B6sD/?taken-by=ramaworks

That's a hell of a thock. Didn't realise it would make such a difference!

Offline KingRama

  • * Maker
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #27 on: Wed, 24 August 2016, 06:35:04 »
Here's a video of the sound difference, very satisfying!
https://www.instagram.com/p/BGbelG0B6sD/?taken-by=ramaworks

That's a hell of a thock. Didn't realise it would make such a difference!


Yeah man, huge difference! Just noticed you're in Melbourne, where about's?

Could show you in person if you want :) Or come around to whenever me and a few other Melbourne GH'ers meet up :D


Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline milchek

  • Posts: 73
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #28 on: Wed, 24 August 2016, 19:57:08 »
Quote from: KingRama
Just noticed you're in Melbourne, where about's?
Could show you in person if you want :) Or come around to whenever me and a few other Melbourne GH'ers meet up :D

Yep I'm in Melbourne, well, SE Suburbs anyway. Didn't realise there was a Melbourne GH group - details? Would be keen to come along at some point. I have a newborn to contend with right now though, so spare time is scarce. Anyway, I ordered a few of these though, so if timing is right I'll grab em at the next meet, so you don't have to post em.

Offline KingRama

  • * Maker
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #29 on: Wed, 24 August 2016, 20:09:51 »
Quote from: KingRama
Just noticed you're in Melbourne, where about's?
Could show you in person if you want :) Or come around to whenever me and a few other Melbourne GH'ers meet up :D

Yep I'm in Melbourne, well, SE Suburbs anyway. Didn't realise there was a Melbourne GH group - details? Would be keen to come along at some point. I have a newborn to contend with right now though, so spare time is scarce. Anyway, I ordered a few of these though, so if timing is right I'll grab em at the next meet, so you don't have to post em.

Yeah I'm in SE as well!

Not exactly a group, but I just meet up with a few of the members every now and then, I'll let you know if something comes up! We just hang out together more than anything, but we always like showing things we got off :P

Oh, I'm not actually shipping them, I just designed these for ZISB, so they're entirely his product. It differs a bit from the caps I produce myself.
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Shados

  • Posts: 129
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #30 on: Wed, 24 August 2016, 20:13:15 »
Show Image


Very excited for this Zisb.

Zisb sent me one of the prototypes and I can confirm that it feels amazing.

Here's a video of the sound difference, very satisfying!
https://www.instagram.com/p/BGbelG0B6sD/?taken-by=ramaworks

Crap, that actually does sound amazing, hnnng. Maybe I'll just get four for the arrows on my Filco ._.

Offline KingRama

  • * Maker
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #31 on: Wed, 24 August 2016, 20:23:52 »
Show Image


Very excited for this Zisb.

Zisb sent me one of the prototypes and I can confirm that it feels amazing.

Here's a video of the sound difference, very satisfying!
https://www.instagram.com/p/BGbelG0B6sD/?taken-by=ramaworks

Crap, that actually does sound amazing, hnnng. Maybe I'll just get four for the arrows on my Filco ._.

OH man, another Melbourner! You gotta come along too :P Where abouts are you mate?
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Shados

  • Posts: 129
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #32 on: Wed, 24 August 2016, 20:30:46 »
Show Image


Very excited for this Zisb.

Zisb sent me one of the prototypes and I can confirm that it feels amazing.

Here's a video of the sound difference, very satisfying!
https://www.instagram.com/p/BGbelG0B6sD/?taken-by=ramaworks

Crap, that actually does sound amazing, hnnng. Maybe I'll just get four for the arrows on my Filco ._.

OH man, another Melbourner! You gotta come along too :P Where abouts are you mate?

There are literally millions of us ;)! I'm up just a few suburbs north from the CBD.

Offline KingRama

  • * Maker
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #33 on: Wed, 24 August 2016, 20:32:00 »
Show Image


Very excited for this Zisb.

Zisb sent me one of the prototypes and I can confirm that it feels amazing.

Here's a video of the sound difference, very satisfying!
https://www.instagram.com/p/BGbelG0B6sD/?taken-by=ramaworks

Crap, that actually does sound amazing, hnnng. Maybe I'll just get four for the arrows on my Filco ._.

OH man, another Melbourner! You gotta come along too :p Where abouts are you mate?

There are literally millions of us ;) ! I'm up just a few suburbs north from the CBD.

Hahaha oh yeah, there are too! :P I will find the GH'ers one by one Okay sweet, sounds close enough to me :P
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline milchek

  • Posts: 73
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #34 on: Wed, 24 August 2016, 21:07:31 »
showing things we got off :P



Let me know when the next catch up, I'll try to make it down and say g'day.

Offline KingRama

  • * Maker
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #35 on: Wed, 24 August 2016, 21:08:53 »
showing things we got off :p

Show Image


Let me know when the next catch up, I'll try to make it down and say g'day.

HAHA! Awesome dude, I'll let you know for sure :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #36 on: Wed, 24 August 2016, 21:26:48 »
Honestly I would try to go down to Melbourne if there was a meetup  :thumb:

Anything to get out of Brisvegas.


On a side note we are now at 186.. so close to 200. Thanks for all the support guys <3

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #37 on: Thu, 25 August 2016, 21:01:51 »
12 Hours left. Payment will be made immediately so please get your orders in now if you have been waiting  :thumb:

Offline Khuya

  • Posts: 91
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #38 on: Thu, 25 August 2016, 23:58:15 »
just got some $$, in for 33...

Offline ba7777

  • Posts: 177
  • Location: China
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #39 on: Fri, 26 August 2016, 01:07:18 »
great caps. Just ordered a dozen of them.


从我的 iPad 发送,使用 Tapatalk

Offline Meowsaur

  • Posts: 22
  • Location: England (South)
  • I don't like that.
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #40 on: Fri, 26 August 2016, 07:09:28 »
£13 for a singular keycap? I must be mental.
Ordered.

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5204
  • Location: United Kingdom
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3
« Reply #41 on: Fri, 26 August 2016, 07:19:34 »
£13 for a singular keycap? I must be metal.
Ordered.
FTFY :))

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #42 on: Fri, 26 August 2016, 10:03:26 »
The buying period is now over. A great thanks to everyone who participated.  ;D

Payment will be made to the manufacturer within a week. ( Transferring money takes time)

From there it will be a 3-4week manufacturing time.

I will keep you updated!

Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #43 on: Fri, 26 August 2016, 10:30:35 »
The buying period is now over. A great thanks to everyone who participated.  ;D

Payment will be made to the manufacturer within a week. ( Transferring money takes time)

From there it will be a 3-4week manufacturing time.

I will keep you updated!

Zisb I literally was just about to PM you to ask if I could add a few caps to my order  :-[

Seems like I missed the boat... Sadness...
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline jdreamer

  • Posts: 179
  • Location: Kangaroo Land
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #44 on: Sun, 28 August 2016, 00:41:53 »
I am based in Australia as well. If there are any extras, please PM.. :(
My life for Aiur!

Offline jdreamer

  • Posts: 179
  • Location: Kangaroo Land
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #45 on: Mon, 29 August 2016, 23:37:25 »
Any update? :)
My life for Aiur!

Offline LunarisDream

  • Posts: 440
  • Location: Changchun, China
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #46 on: Tue, 30 August 2016, 00:21:06 »

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #47 on: Tue, 30 August 2016, 00:39:48 »
Any update? :)

A tad soon, mate.

Ehh not bad :P


So at the moment I am just waiting for paypal to transfer funds to my bank account so I can pay. I should have it by 2nd of sept at the latest.

Offline zisb

  • Thread Starter
  • Posts: 128
  • Location: Australia
  • Aluminium, learn to spell it.
    • zisb.io
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #48 on: Tue, 30 August 2016, 04:14:22 »
Payment has been made. Manufacturing is now beginning. Estimated date of completion is 22nd September.  :thumb:

Offline milchek

  • Posts: 73
  • Location: Melbourne, Australia
Re: (RAMA WORKS x Invyr) Aluminium Keycaps SA Row 3 [Manufacturing]
« Reply #49 on: Tue, 30 August 2016, 05:28:05 »
Nice one! Thanks for the update.