Author Topic: RAMA M10-A (NOW AVAILABLE)  (Read 29916 times)

0 Members and 1 Guest are viewing this topic.

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
RAMA M10-A (NOW AVAILABLE)
« on: Wed, 23 November 2016, 22:25:18 »
https://www.massdrop.com/buy/rama-m10-a?mode=guest_open



Launching soon!


After a grueling almost 8 month wait, weíre finally here. The RAMA M10-A is finally launching! Since the beginning Iíve always wanted to hit a price point that would make it accessible to as many as people as possible - thatís why I teamed up with Massdrop to make this product a reality and to get it to everyone as affordably and as time efficiently as possible.

The M10-A is really a premium product, from itís heavy weight to its monolithic structure - no detail was spared when designing this product from the ground up. Especially with Machine Industries working in parallel to make sure that the M10-A is as easy as possible to program and use.

I would not have been able to bring this product to the market without the immense support from members of the community. So thank you all for always been so supporting in my products, my designs and my work. The M10-A is only the beginning.

If you have any questions regarding the product, feel free to ask and Iíll answer it as soon as possible!


$99.99 with free domestic shipping (USA), switches and caps :)
« Last Edit: Mon, 28 November 2016, 08:12:57 by KingRama »
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline stillzman

  • Posts: 120
Re: RAMA M10-A
« Reply #1 on: Wed, 23 November 2016, 23:23:52 »
finally, congrats rama! can't wait!

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A
« Reply #2 on: Wed, 23 November 2016, 23:25:01 »
finally, congrats rama! can't wait!

Thanks heaps bro, really happy it's finally come to this! Just want to get the M10 out there :)

Can't wait to see what people do with it! :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Vigrith

  • Posts: 1316
Re: RAMA M10-A
« Reply #3 on: Thu, 24 November 2016, 08:44:53 »
Wow, that price point is incredible! The M10 looks fantastic, congratulations Rama. I'm really tempted to get one even though I can't solder, just going to have to get a friend or someone else to do it for me - I'm assuming pre-assembled is not going to be an option?

Thank you for all the work you've put in!

Offline AMongoose

  • happy workman user
  • Posts: 220
Re: RAMA M10-A
« Reply #4 on: Thu, 24 November 2016, 09:36:35 »
Sweet.

Offline SKD

  • * Vendor
  • Posts: 152
  • Location: England
Re: RAMA M10-A
« Reply #5 on: Thu, 24 November 2016, 12:47:12 »
I guess I'll have to get this too to match the M4 :thumb:

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A
« Reply #6 on: Thu, 24 November 2016, 16:20:06 »
Wow, that price point is incredible! The M10 looks fantastic, congratulations Rama. I'm really tempted to get one even though I can't solder, just going to have to get a friend or someone else to do it for me - I'm assuming pre-assembled is not going to be an option?

Thank you for all the work you've put in!

Yeah dude, I'm so happy with the price point we got it to, I was always aiming for $120. And this is including everything you need too!! There's an assembled variant for $8 extra :)

Cheers mate!

Sweet.

Thanks dude!!

I guess I'll have to get this too to match the M4 :thumb:


Brother and bigger brother!! They're a great match :D Cheers bro :)   
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Vigrith

  • Posts: 1316
Re: RAMA M10-A
« Reply #7 on: Thu, 24 November 2016, 17:31:56 »
Yeah dude, I'm so happy with the price point we got it to, I was always aiming for $120. And this is including everything you need too!! There's an assembled variant for $8 extra :)

Cheers mate!

OH, we in there 100% then, probably going to order a couple, one for the wife and one for myself, perfect! Price is beyond great yea and cheers for offering assembly, honestly, that helps a ton for people who are a little inept (or just lazy) like myself.

Hopefully there's a tiny gap between this launching and the JC65 coming out haha, wallet needs a breather!

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A
« Reply #8 on: Thu, 24 November 2016, 18:40:54 »
Yeah dude, I'm so happy with the price point we got it to, I was always aiming for $120. And this is including everything you need too!! There's an assembled variant for $8 extra :)

Cheers mate!

OH, we in there 100% then, probably going to order a couple, one for the wife and one for myself, perfect! Price is beyond great yea and cheers for offering assembly, honestly, that helps a ton for people who are a little inept (or just lazy) like myself.

Hopefully there's a tiny gap between this launching and the JC65 coming out haha, wallet needs a breather!

Awww awesome! Thanks heaps dude :)

Yeah there should be a tiny gap between the two, jchan should be receiving the first sample next week I think! :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Vigrith

  • Posts: 1316
Re: RAMA M10-A
« Reply #9 on: Thu, 24 November 2016, 20:10:43 »
Awww awesome! Thanks heaps dude :)

Yeah there should be a tiny gap between the two, jchan should be receiving the first sample next week I think! :)

Yea I'd seen he should be getting the sample some time soon, exciting times! Glad to hear there should be a tiny gap, they'll look so good next to each other! Now I just need to decide on colours, always the hardest part!

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A
« Reply #10 on: Thu, 24 November 2016, 21:54:12 »
Awww awesome! Thanks heaps dude :)

Yeah there should be a tiny gap between the two, jchan should be receiving the first sample next week I think! :)

Yea I'd seen he should be getting the sample some time soon, exciting times! Glad to hear there should be a tiny gap, they'll look so good next to each other! Now I just need to decide on colours, always the hardest part!

Super excited, very keen to see it all together after staring at it on a screen for so long :)

Yeah, I think they'd look great next to eachother, both high profile :) Colours is definitely the toughest choice to many :P
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline bnthor

  • Posts: 12
  • Location: Aix en Provence, France
Re: RAMA M10-A
« Reply #11 on: Fri, 25 November 2016, 13:15:57 »
I have the Ramamania

Offline Waateva

  • * Esteemed Elder
  • Posts: 1742
  • Location: Michigan, USA
Re: RAMA M10-A
« Reply #12 on: Fri, 25 November 2016, 13:44:55 »
Looks real nice Rama, might just have to hop in on this one :p
Duck Black Bird - 80g Gatistotles /// O'Mira - V Blacks /// LZ GH v2 - V Clears /// NIU40 - Ergo Clears

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #13 on: Mon, 28 November 2016, 08:13:21 »
Thanks guys!!

The drop is now open and the M10-A is officially available for sale! :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline SKD

  • * Vendor
  • Posts: 152
  • Location: England
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #14 on: Mon, 28 November 2016, 08:14:47 »
Joined the drop!

Offline Waateva

  • * Esteemed Elder
  • Posts: 1742
  • Location: Michigan, USA
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #15 on: Mon, 28 November 2016, 10:47:11 »
Pledged @ $99.99, let's go guys!
Duck Black Bird - 80g Gatistotles /// O'Mira - V Blacks /// LZ GH v2 - V Clears /// NIU40 - Ergo Clears

Offline Badwrench

  • * Destiny Supporter
  • Posts: 1991
  • Location: So. Cal.
  • ummmm.....I forgot
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #16 on: Mon, 28 November 2016, 11:57:25 »
Very good design.   :thumb:

I may just have to jump on the separate numpad bandwagon with this one. 
wut. i'd buy a ****ty IBM board for that green V2

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #17 on: Mon, 28 November 2016, 16:52:49 »
Joined the drop!
Pledged @ $99.99, let's go guys!
 
Very good design.   :thumb:

I may just have to jump on the separate numpad bandwagon with this one. 

Thanks so much guys!   
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline MikeTheTiger

  • Posts: 517
  • Location: Louisiana
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #18 on: Tue, 29 November 2016, 17:11:57 »
Joined...can't wait for a big brother for my M4-A!!

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #19 on: Tue, 29 November 2016, 18:05:56 »
Joined...can't wait for a big brother for my M4-A!!

They're gonna look so swell together! Thanks so much Mike :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline tinymakesthings

  • Posts: 92
  • staytuned
    • My Twitch Channel
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #20 on: Tue, 29 November 2016, 18:13:48 »
Looks so freaking clean Rama. <3

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #21 on: Tue, 29 November 2016, 18:57:09 »
Looks so freaking clean Rama. <3

Thanks so much Tiny!!! <3
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline naasfu

  • The Curator
  • * Destiny Supporter
  • Posts: 3416
  • Location: isla de encanta
  • WU-TANG IS FOR THE CHILDREN.
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #22 on: Sun, 11 December 2016, 04:26:22 »
woohoo, i just ordered one of these beautiful rama pads in space grey.  and 416 units ordered so far, wow!  go rama go.
WANTED: i like clacks                   post your mspaints!                 post your rubber domes!

Offline raymogi

  • Posts: 1412
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #23 on: Sun, 11 December 2016, 04:56:01 »
Whyyyy MD :(

Is it possible for you to ship directly to me so it can be undervalued? :D
Please feed my addiction.

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #24 on: Sun, 11 December 2016, 06:29:57 »
woohoo, i just ordered one of these beautiful rama pads in space grey.  and 416 units ordered so far, wow!  go rama go.

wow, thanks heaps naas! I'm so lost for words how awesome it's going to be to see people finally getting these in their hands and using them! So excited man :D Cheers!

Whyyyy MD :(

Is it possible for you to ship directly to me so it can be undervalued? :D
 

Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline raymogi

  • Posts: 1412
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #25 on: Sun, 11 December 2016, 07:40:54 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D
Please feed my addiction.

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #26 on: Sun, 11 December 2016, 16:34:50 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D

Thanks so much dude! Can't wait for you to get it!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline N3RDLY

  • Posts: 100
    • G33k.works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #27 on: Wed, 28 December 2016, 17:40:08 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D

Thanks so much dude! Can't wait for you to get it!


But but now we have to wait!

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #28 on: Wed, 28 December 2016, 22:21:45 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D

Thanks so much dude! Can't wait for you to get it!


But but now we have to wait!

Next year is super soon :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 52
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #29 on: Thu, 02 February 2017, 04:37:50 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #30 on: Thu, 02 February 2017, 21:04:09 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems


Yeah for sure, a few automotive shops or specialist powder coating places should be able to do it for you :) I've used paint shops quite a bit here in Melbourne, especially during my University years for models/prototypes. You can just give them anything and they'll paint it - Only the outer surfaces would have to be painted as well - fairly easy :)

Else, if you're good at spraypainting you can lay down a good primer then try it out yourself :P

Cheers :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 52
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #31 on: Fri, 03 February 2017, 18:42:57 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems


Yeah for sure, a few automotive shops or specialist powder coating places should be able to do it for you :) I've used paint shops quite a bit here in Melbourne, especially during my University years for models/prototypes. You can just give them anything and they'll paint it - Only the outer surfaces would have to be painted as well - fairly easy :)

Else, if you're good at spraypainting you can lay down a good primer then try it out yourself :P

Cheers :)

Thanks man! Looking forward to some hhkb love in 2017!! Rama + anything remotely hhkb = instabuy.

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #32 on: Fri, 03 February 2017, 22:53:16 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems


Yeah for sure, a few automotive shops or specialist powder coating places should be able to do it for you :) I've used paint shops quite a bit here in Melbourne, especially during my University years for models/prototypes. You can just give them anything and they'll paint it - Only the outer surfaces would have to be painted as well - fairly easy :)

Else, if you're good at spraypainting you can lay down a good primer then try it out yourself :p

Cheers :)

Thanks man! Looking forward to some hhkb love in 2017!! Rama + anything remotely hhkb = instabuy.

hah cheers mate! can't wait to offer more in the future :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 52
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #33 on: Sun, 05 March 2017, 22:08:42 »
Hey rama

Q1) about to get my M4A powder coated - do you happen to know what color that hhkb white is you used?  Not sure if there is an accepted color code or something for it instead of shoving my keeb in their face.

Q2) Also since i know you are busy af, i will put this here too.  Do you (or anyone else) know offhand whether holtite sockets fit the M10 and M4 pcb?
« Last Edit: Sun, 05 March 2017, 22:12:29 by libertycannon »

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #34 on: Sun, 05 March 2017, 22:54:10 »
Hey rama

Q1) about to get my M4A powder coated - do you happen to know what color that hhkb white is you used?  Not sure if there is an accepted color code or something for it instead of shoving my keeb in their face.

Q2) Also since i know you are busy af, i will put this here too.  Do you (or anyone else) know offhand whether holtite sockets fit the M10 and M4 pcb?

Hey man!

Q1) If you're referring to the initial prototype of the M10, the color is Pantone 427U. I don't have a colour reference for a stock HHKB case though, but the M10 prototype looks really nice next to it:


Q2) I will find that out for you and get back to you :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 52
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #35 on: Sun, 05 March 2017, 22:58:43 »
Thabks duuude!!

I always just assumed you had color matched it to your hhkb for some reason.  Yah though, the prototype is what i was referring to.  Keebs and keycaps have made me realize how awful i am at judging colors hah. 

Don't worry about the holtite question actually.  I was thinking you may have known offhand.  I already have a sack of them in route for the m4a so i will know soon enough.

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #36 on: Sun, 05 March 2017, 23:01:38 »
Thabks duuude!!

I always just assumed you had color matched it to your hhkb for some reason.  Yah though, the prototype is what i was referring to.  Keebs and keycaps have made me realize how awful i am at judging colors hah. 

Don't worry about the holtite question actually.  I was thinking you may have known offhand.  I already have a sack of them in route for the m4a so i will know soon enough.


No worries man :)

I really love the colour used for the prototype, cool greys are amazing. But yeah, most powdercoaters should be able to do something with that reference color, it's very widely used! You gotta share how it turns out on the M4, that's going to look pretty unique :) Also, make sure that they don't paint too much inside the area where the nylon piece sits, there's about 0.1mm of tolerance around the inside of that cut.

Hope the holtites fit too! Let us know :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 52
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #37 on: Sat, 11 March 2017, 21:11:21 »
holtite sockets do NOT fit.

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #38 on: Sun, 12 March 2017, 05:03:33 »
holtite sockets do NOT fit.

Let me check that for you, Machine uses a specific SIP socket - from what I recall it's not Holtite but another brand. I have left him a message and he will get back to me with the model and make :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 52
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #39 on: Sun, 12 March 2017, 10:05:23 »
Yeah really not a big deal man - already soldered everything anyhow.  I should have actually looked up sizes before ordering hah. 

One other question,  is there anything i can do to stabilize the 2u keys? I put an two SA 2u on and they both shot off because i hit the key on the sides (where they have no switch).  I put two DSA caps on there instead and they are fine so this could be an issue with the actual SA keys themselves but either way curious about stabilizing.

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #40 on: Sun, 12 March 2017, 19:47:19 »
Yeah really not a big deal man - already soldered everything anyhow.  I should have actually looked up sizes before ordering hah. 

One other question,  is there anything i can do to stabilize the 2u keys? I put an two SA 2u on and they both shot off because i hit the key on the sides (where they have no switch).  I put two DSA caps on there instead and they are fine so this could be an issue with the actual SA keys themselves but either way curious about stabilizing.


Hey man! They're: Mill Max 0479-0-43-80-34-27-10-0.

http://www.mouser.com/ProductDetail/Mill-Max/0479-0-43-80-34-27-10-0/?qs=SDfxZrmr%252bNnGsfiSPH9myQ==

As for the stabs, they are not supported - call me strange but I enjoy the rocking action - I think it's sort of ergonomic to hit it when it's angled and your finger pushes in on an angle rather than straight down :p
« Last Edit: Sun, 12 March 2017, 19:59:41 by KingRama »
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline cynviloq

  • Posts: 300
  • Location: meh-kee
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #41 on: Thu, 16 March 2017, 02:05:25 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?
« Last Edit: Thu, 16 March 2017, 02:16:06 by cynviloq »

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #42 on: Thu, 16 March 2017, 18:31:40 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?


Very likely! :)

Spinner is coming, looks like hopefully next month :D

As for the Mill Max socket, it has a flange so I'm assuming it sits flush - then yeah I guess you solder it, but I'm not too sure. I'll see if machine has an answer :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline breusch91

  • * Maker
  • Posts: 252
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #43 on: Thu, 16 March 2017, 18:53:47 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?


Very likely! :)

Spinner is coming, looks like hopefully next month :D

As for the Mill Max socket, it has a flange so I'm assuming it sits flush - then yeah I guess you solder it, but I'm not too sure. I'll see if machine has an answer :)

Birthday is April 11th, feel free to release the spinner and the m-6A minipad on that day  ;D ;D

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #44 on: Thu, 16 March 2017, 21:09:43 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?


Very likely! :)

Spinner is coming, looks like hopefully next month :D

As for the Mill Max socket, it has a flange so I'm assuming it sits flush - then yeah I guess you solder it, but I'm not too sure. I'll see if machine has an answer :)

Birthday is April 11th, feel free to release the spinner and the m-6A minipad on that day  ;D ;D

I will most certainly try! Hope you have an amazing birthday man :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #45 on: Mon, 27 March 2017, 17:03:22 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk


Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #46 on: Mon, 27 March 2017, 20:08:20 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk

Just got an update from Massdrop saying they are shipping to their warehouse now and will be doing an internal QC :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #47 on: Tue, 28 March 2017, 03:56:03 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk

Just got an update from Massdrop saying they are shipping to their warehouse now and will be doing an internal QC :)
Thanks! I got kinda worried since Massdrop didn't drop an update. :thumb:

Online KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1122
  • Location: Melbourne, Australia
  • www.rama.works
    • Rama Works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #48 on: Tue, 28 March 2017, 04:54:02 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk

Just got an update from Massdrop saying they are shipping to their warehouse now and will be doing an internal QC :)
Thanks! I got kinda worried since Massdrop didn't drop an update. :thumb:

Yeah completely understandable :P It's coming dw! :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Karpy

  • Posts: 5
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #49 on: Tue, 28 March 2017, 15:21:22 »
I need one of these but they are no where to be found!!:/


Sent from my iPhone using Tapatalk