Author Topic: RAMA M10-A (NOW AVAILABLE)  (Read 38244 times)

0 Members and 2 Guests are viewing this topic.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
RAMA M10-A (NOW AVAILABLE)
« on: Wed, 23 November 2016, 22:25:18 »
https://www.massdrop.com/buy/rama-m10-a?mode=guest_open



Launching soon!


After a grueling almost 8 month wait, we’re finally here. The RAMA M10-A is finally launching! Since the beginning I’ve always wanted to hit a price point that would make it accessible to as many as people as possible - that’s why I teamed up with Massdrop to make this product a reality and to get it to everyone as affordably and as time efficiently as possible.

The M10-A is really a premium product, from it’s heavy weight to its monolithic structure - no detail was spared when designing this product from the ground up. Especially with Machine Industries working in parallel to make sure that the M10-A is as easy as possible to program and use.

I would not have been able to bring this product to the market without the immense support from members of the community. So thank you all for always been so supporting in my products, my designs and my work. The M10-A is only the beginning.

If you have any questions regarding the product, feel free to ask and I’ll answer it as soon as possible!


$99.99 with free domestic shipping (USA), switches and caps :)
« Last Edit: Mon, 28 November 2016, 08:12:57 by KingRama »
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline stillzman

  • Posts: 125
Re: RAMA M10-A
« Reply #1 on: Wed, 23 November 2016, 23:23:52 »
finally, congrats rama! can't wait!

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A
« Reply #2 on: Wed, 23 November 2016, 23:25:01 »
finally, congrats rama! can't wait!

Thanks heaps bro, really happy it's finally come to this! Just want to get the M10 out there :)

Can't wait to see what people do with it! :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Vigrith

  • Posts: 1601
Re: RAMA M10-A
« Reply #3 on: Thu, 24 November 2016, 08:44:53 »
Wow, that price point is incredible! The M10 looks fantastic, congratulations Rama. I'm really tempted to get one even though I can't solder, just going to have to get a friend or someone else to do it for me - I'm assuming pre-assembled is not going to be an option?

Thank you for all the work you've put in!

Offline AMongoose

  • happy workman user
  • Posts: 220
Re: RAMA M10-A
« Reply #4 on: Thu, 24 November 2016, 09:36:35 »
Sweet.

Offline SKD

  • * Vendor
  • Posts: 152
  • Location: England
Re: RAMA M10-A
« Reply #5 on: Thu, 24 November 2016, 12:47:12 »
I guess I'll have to get this too to match the M4 :thumb:

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A
« Reply #6 on: Thu, 24 November 2016, 16:20:06 »
Wow, that price point is incredible! The M10 looks fantastic, congratulations Rama. I'm really tempted to get one even though I can't solder, just going to have to get a friend or someone else to do it for me - I'm assuming pre-assembled is not going to be an option?

Thank you for all the work you've put in!

Yeah dude, I'm so happy with the price point we got it to, I was always aiming for $120. And this is including everything you need too!! There's an assembled variant for $8 extra :)

Cheers mate!

Sweet.

Thanks dude!!

I guess I'll have to get this too to match the M4 :thumb:


Brother and bigger brother!! They're a great match :D Cheers bro :)   
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Vigrith

  • Posts: 1601
Re: RAMA M10-A
« Reply #7 on: Thu, 24 November 2016, 17:31:56 »
Yeah dude, I'm so happy with the price point we got it to, I was always aiming for $120. And this is including everything you need too!! There's an assembled variant for $8 extra :)

Cheers mate!

OH, we in there 100% then, probably going to order a couple, one for the wife and one for myself, perfect! Price is beyond great yea and cheers for offering assembly, honestly, that helps a ton for people who are a little inept (or just lazy) like myself.

Hopefully there's a tiny gap between this launching and the JC65 coming out haha, wallet needs a breather!

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A
« Reply #8 on: Thu, 24 November 2016, 18:40:54 »
Yeah dude, I'm so happy with the price point we got it to, I was always aiming for $120. And this is including everything you need too!! There's an assembled variant for $8 extra :)

Cheers mate!

OH, we in there 100% then, probably going to order a couple, one for the wife and one for myself, perfect! Price is beyond great yea and cheers for offering assembly, honestly, that helps a ton for people who are a little inept (or just lazy) like myself.

Hopefully there's a tiny gap between this launching and the JC65 coming out haha, wallet needs a breather!

Awww awesome! Thanks heaps dude :)

Yeah there should be a tiny gap between the two, jchan should be receiving the first sample next week I think! :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Vigrith

  • Posts: 1601
Re: RAMA M10-A
« Reply #9 on: Thu, 24 November 2016, 20:10:43 »
Awww awesome! Thanks heaps dude :)

Yeah there should be a tiny gap between the two, jchan should be receiving the first sample next week I think! :)

Yea I'd seen he should be getting the sample some time soon, exciting times! Glad to hear there should be a tiny gap, they'll look so good next to each other! Now I just need to decide on colours, always the hardest part!

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A
« Reply #10 on: Thu, 24 November 2016, 21:54:12 »
Awww awesome! Thanks heaps dude :)

Yeah there should be a tiny gap between the two, jchan should be receiving the first sample next week I think! :)

Yea I'd seen he should be getting the sample some time soon, exciting times! Glad to hear there should be a tiny gap, they'll look so good next to each other! Now I just need to decide on colours, always the hardest part!

Super excited, very keen to see it all together after staring at it on a screen for so long :)

Yeah, I think they'd look great next to eachother, both high profile :) Colours is definitely the toughest choice to many :P
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline bnthor

  • Posts: 12
  • Location: Aix en Provence, France
Re: RAMA M10-A
« Reply #11 on: Fri, 25 November 2016, 13:15:57 »
I have the Ramamania

Offline Waateva

  • * Esteemed Elder
  • Posts: 1773
  • Location: Michigan, USA
Re: RAMA M10-A
« Reply #12 on: Fri, 25 November 2016, 13:44:55 »
Looks real nice Rama, might just have to hop in on this one :p
Duck Black Bird - 80g Gatistotles /// O'Mira - V Blacks /// LZ GH v2 - V Clears /// NIU40 - Ergo Clears

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #13 on: Mon, 28 November 2016, 08:13:21 »
Thanks guys!!

The drop is now open and the M10-A is officially available for sale! :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline SKD

  • * Vendor
  • Posts: 152
  • Location: England
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #14 on: Mon, 28 November 2016, 08:14:47 »
Joined the drop!

Offline Waateva

  • * Esteemed Elder
  • Posts: 1773
  • Location: Michigan, USA
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #15 on: Mon, 28 November 2016, 10:47:11 »
Pledged @ $99.99, let's go guys!
Duck Black Bird - 80g Gatistotles /// O'Mira - V Blacks /// LZ GH v2 - V Clears /// NIU40 - Ergo Clears

Offline Badwrench

  • * Destiny Supporter
  • Posts: 1986
  • Location: So. Cal.
  • ummmm.....I forgot
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #16 on: Mon, 28 November 2016, 11:57:25 »
Very good design.   :thumb:

I may just have to jump on the separate numpad bandwagon with this one. 
wut. i'd buy a ****ty IBM board for that green V2

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #17 on: Mon, 28 November 2016, 16:52:49 »
Joined the drop!
Pledged @ $99.99, let's go guys!
 
Very good design.   :thumb:

I may just have to jump on the separate numpad bandwagon with this one. 

Thanks so much guys!   
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline MikeTheTiger

  • Posts: 631
  • Location: 29.9511° N, 90.0715° W
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #18 on: Tue, 29 November 2016, 17:11:57 »
Joined...can't wait for a big brother for my M4-A!!

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #19 on: Tue, 29 November 2016, 18:05:56 »
Joined...can't wait for a big brother for my M4-A!!

They're gonna look so swell together! Thanks so much Mike :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline tinymakesthings

  • Posts: 95
  • staytuned
    • Check out my stuff here!
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #20 on: Tue, 29 November 2016, 18:13:48 »
Looks so freaking clean Rama. <3

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #21 on: Tue, 29 November 2016, 18:57:09 »
Looks so freaking clean Rama. <3

Thanks so much Tiny!!! <3
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline naasfu

  • The Curator
  • * Destiny Supporter
  • Posts: 3892
  • Location: thirty six chambers
  • WU-TANG IS FOR THE CHILDREN.
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #22 on: Sun, 11 December 2016, 04:26:22 »
woohoo, i just ordered one of these beautiful rama pads in space grey.  and 416 units ordered so far, wow!  go rama go.

Offline raymogi

  • Posts: 1412
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #23 on: Sun, 11 December 2016, 04:56:01 »
Whyyyy MD :(

Is it possible for you to ship directly to me so it can be undervalued? :D
Please feed my addiction.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #24 on: Sun, 11 December 2016, 06:29:57 »
woohoo, i just ordered one of these beautiful rama pads in space grey.  and 416 units ordered so far, wow!  go rama go.

wow, thanks heaps naas! I'm so lost for words how awesome it's going to be to see people finally getting these in their hands and using them! So excited man :D Cheers!

Whyyyy MD :(

Is it possible for you to ship directly to me so it can be undervalued? :D
 

Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline raymogi

  • Posts: 1412
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #25 on: Sun, 11 December 2016, 07:40:54 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D
Please feed my addiction.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #26 on: Sun, 11 December 2016, 16:34:50 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D

Thanks so much dude! Can't wait for you to get it!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline N3RDLY

  • Posts: 100
    • G33k.works
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #27 on: Wed, 28 December 2016, 17:40:08 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D

Thanks so much dude! Can't wait for you to get it!


But but now we have to wait!

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #28 on: Wed, 28 December 2016, 22:21:45 »
Was the only way to bring it to market, I'm just not well placed here in AUS to meet the demand :( And to get it to that price point as well X_X

Unfortunately not bro, all the units are not passing through my hands - wish I could help out. Only way is to get it through MD  :p

Joined anyway :D

Thanks so much dude! Can't wait for you to get it!


But but now we have to wait!

Next year is super soon :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #29 on: Thu, 02 February 2017, 04:37:50 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #30 on: Thu, 02 February 2017, 21:04:09 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems


Yeah for sure, a few automotive shops or specialist powder coating places should be able to do it for you :) I've used paint shops quite a bit here in Melbourne, especially during my University years for models/prototypes. You can just give them anything and they'll paint it - Only the outer surfaces would have to be painted as well - fairly easy :)

Else, if you're good at spraypainting you can lay down a good primer then try it out yourself :P

Cheers :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #31 on: Fri, 03 February 2017, 18:42:57 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems


Yeah for sure, a few automotive shops or specialist powder coating places should be able to do it for you :) I've used paint shops quite a bit here in Melbourne, especially during my University years for models/prototypes. You can just give them anything and they'll paint it - Only the outer surfaces would have to be painted as well - fairly easy :)

Else, if you're good at spraypainting you can lay down a good primer then try it out yourself :P

Cheers :)

Thanks man! Looking forward to some hhkb love in 2017!! Rama + anything remotely hhkb = instabuy.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #32 on: Fri, 03 February 2017, 22:53:16 »
Hey Rama - is there any practical way i (or maybe a special shop could) can recolor the silver M10-A to the offwhite color you have, so it matches the case of white hhkb, without potentially ruining it or the finish? Super excited to get it but the color difference wont be ideal #firstworldproblems


Yeah for sure, a few automotive shops or specialist powder coating places should be able to do it for you :) I've used paint shops quite a bit here in Melbourne, especially during my University years for models/prototypes. You can just give them anything and they'll paint it - Only the outer surfaces would have to be painted as well - fairly easy :)

Else, if you're good at spraypainting you can lay down a good primer then try it out yourself :p

Cheers :)

Thanks man! Looking forward to some hhkb love in 2017!! Rama + anything remotely hhkb = instabuy.

hah cheers mate! can't wait to offer more in the future :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #33 on: Sun, 05 March 2017, 22:08:42 »
Hey rama

Q1) about to get my M4A powder coated - do you happen to know what color that hhkb white is you used?  Not sure if there is an accepted color code or something for it instead of shoving my keeb in their face.

Q2) Also since i know you are busy af, i will put this here too.  Do you (or anyone else) know offhand whether holtite sockets fit the M10 and M4 pcb?
« Last Edit: Sun, 05 March 2017, 22:12:29 by libertycannon »

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #34 on: Sun, 05 March 2017, 22:54:10 »
Hey rama

Q1) about to get my M4A powder coated - do you happen to know what color that hhkb white is you used?  Not sure if there is an accepted color code or something for it instead of shoving my keeb in their face.

Q2) Also since i know you are busy af, i will put this here too.  Do you (or anyone else) know offhand whether holtite sockets fit the M10 and M4 pcb?

Hey man!

Q1) If you're referring to the initial prototype of the M10, the color is Pantone 427U. I don't have a colour reference for a stock HHKB case though, but the M10 prototype looks really nice next to it:


Q2) I will find that out for you and get back to you :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #35 on: Sun, 05 March 2017, 22:58:43 »
Thabks duuude!!

I always just assumed you had color matched it to your hhkb for some reason.  Yah though, the prototype is what i was referring to.  Keebs and keycaps have made me realize how awful i am at judging colors hah. 

Don't worry about the holtite question actually.  I was thinking you may have known offhand.  I already have a sack of them in route for the m4a so i will know soon enough.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #36 on: Sun, 05 March 2017, 23:01:38 »
Thabks duuude!!

I always just assumed you had color matched it to your hhkb for some reason.  Yah though, the prototype is what i was referring to.  Keebs and keycaps have made me realize how awful i am at judging colors hah. 

Don't worry about the holtite question actually.  I was thinking you may have known offhand.  I already have a sack of them in route for the m4a so i will know soon enough.


No worries man :)

I really love the colour used for the prototype, cool greys are amazing. But yeah, most powdercoaters should be able to do something with that reference color, it's very widely used! You gotta share how it turns out on the M4, that's going to look pretty unique :) Also, make sure that they don't paint too much inside the area where the nylon piece sits, there's about 0.1mm of tolerance around the inside of that cut.

Hope the holtites fit too! Let us know :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #37 on: Sat, 11 March 2017, 21:11:21 »
holtite sockets do NOT fit.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #38 on: Sun, 12 March 2017, 05:03:33 »
holtite sockets do NOT fit.

Let me check that for you, Machine uses a specific SIP socket - from what I recall it's not Holtite but another brand. I have left him a message and he will get back to me with the model and make :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #39 on: Sun, 12 March 2017, 10:05:23 »
Yeah really not a big deal man - already soldered everything anyhow.  I should have actually looked up sizes before ordering hah. 

One other question,  is there anything i can do to stabilize the 2u keys? I put an two SA 2u on and they both shot off because i hit the key on the sides (where they have no switch).  I put two DSA caps on there instead and they are fine so this could be an issue with the actual SA keys themselves but either way curious about stabilizing.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #40 on: Sun, 12 March 2017, 19:47:19 »
Yeah really not a big deal man - already soldered everything anyhow.  I should have actually looked up sizes before ordering hah. 

One other question,  is there anything i can do to stabilize the 2u keys? I put an two SA 2u on and they both shot off because i hit the key on the sides (where they have no switch).  I put two DSA caps on there instead and they are fine so this could be an issue with the actual SA keys themselves but either way curious about stabilizing.


Hey man! They're: Mill Max 0479-0-43-80-34-27-10-0.

http://www.mouser.com/ProductDetail/Mill-Max/0479-0-43-80-34-27-10-0/?qs=SDfxZrmr%252bNnGsfiSPH9myQ==

As for the stabs, they are not supported - call me strange but I enjoy the rocking action - I think it's sort of ergonomic to hit it when it's angled and your finger pushes in on an angle rather than straight down :p
« Last Edit: Sun, 12 March 2017, 19:59:41 by KingRama »
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline cynviloq

  • Posts: 300
  • Location: meh-kee
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #41 on: Thu, 16 March 2017, 02:05:25 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?
« Last Edit: Thu, 16 March 2017, 02:16:06 by cynviloq »

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #42 on: Thu, 16 March 2017, 18:31:40 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?


Very likely! :)

Spinner is coming, looks like hopefully next month :D

As for the Mill Max socket, it has a flange so I'm assuming it sits flush - then yeah I guess you solder it, but I'm not too sure. I'll see if machine has an answer :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Online breusch91

  • * Maker
  • Posts: 258
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #43 on: Thu, 16 March 2017, 18:53:47 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?


Very likely! :)

Spinner is coming, looks like hopefully next month :D

As for the Mill Max socket, it has a flange so I'm assuming it sits flush - then yeah I guess you solder it, but I'm not too sure. I'll see if machine has an answer :)

Birthday is April 11th, feel free to release the spinner and the m-6A minipad on that day  ;D ;D

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #44 on: Thu, 16 March 2017, 21:09:43 »
What's the likelihood of a second run in the future? Please...? Pretty please...??

PS we want the spinner!!

edit: the Mill Max do not seem to have a groove for press fit -- so they need to be soldered to the board to act as a hot swap socket right?


Very likely! :)

Spinner is coming, looks like hopefully next month :D

As for the Mill Max socket, it has a flange so I'm assuming it sits flush - then yeah I guess you solder it, but I'm not too sure. I'll see if machine has an answer :)

Birthday is April 11th, feel free to release the spinner and the m-6A minipad on that day  ;D ;D

I will most certainly try! Hope you have an amazing birthday man :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #45 on: Mon, 27 March 2017, 17:03:22 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk


Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #46 on: Mon, 27 March 2017, 20:08:20 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk

Just got an update from Massdrop saying they are shipping to their warehouse now and will be doing an internal QC :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #47 on: Tue, 28 March 2017, 03:56:03 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk

Just got an update from Massdrop saying they are shipping to their warehouse now and will be doing an internal QC :)
Thanks! I got kinda worried since Massdrop didn't drop an update. :thumb:

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #48 on: Tue, 28 March 2017, 04:54:02 »
Any updates on the M10-A GB?

Gesendet von meinem SM-T710 mit Tapatalk

Just got an update from Massdrop saying they are shipping to their warehouse now and will be doing an internal QC :)
Thanks! I got kinda worried since Massdrop didn't drop an update. :thumb:

Yeah completely understandable :P It's coming dw! :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Karpy

  • Posts: 5
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #49 on: Tue, 28 March 2017, 15:21:22 »
I need one of these but they are no where to be found!!:/


Sent from my iPhone using Tapatalk

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5150
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #50 on: Tue, 28 March 2017, 15:47:18 »
I need one of these but they are no where to be found!!:/


Sent from my iPhone using Tapatalk

Not shipped yet :(

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #51 on: Tue, 28 March 2017, 20:12:10 »
I need one of these but they are no where to be found!!:/


Sent from my iPhone using Tapatalk

Not shipped yet :(

 :( :( :( :(
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline clasicks

  • Formerly KeyboardUser4
  • Posts: 703
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #52 on: Tue, 11 April 2017, 09:07:54 »
Hi I would like to delete my account.
« Last Edit: Wed, 04 July 2018, 14:55:27 by clasicks »

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #53 on: Tue, 11 April 2017, 09:55:11 »
Rama, i am sad i missed this. Will there be any extras available or will i have to search second hand?

Cheers!


I believe  there will be a round 2 :) Stay tuned!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline ambalek

  • Posts: 50
  • Location: London, UK
  • Pizza tonight/Threat neutralized
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #54 on: Tue, 11 April 2017, 17:00:44 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #55 on: Wed, 12 April 2017, 00:11:41 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)


Oh man!!! Cannot wait for you to get your hands on it!

By the way, latest configurator can be downloaded here: https://github.com/machineindustries/configurator/releases

Post some pics when you get it :)


Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline ambalek

  • Posts: 50
  • Location: London, UK
  • Pizza tonight/Threat neutralized
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #56 on: Wed, 12 April 2017, 03:20:30 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)


Oh man!!! Cannot wait for you to get your hands on it!

By the way, latest configurator can be downloaded here: https://github.com/machineindustries/configurator/releases

Post some pics when you get it :)

I certainly will, I might even dig out a proper camera instead of using my phone

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #57 on: Wed, 12 April 2017, 20:06:57 »
Mine just shipped from Massdrop! I ordered a M10-A with clear switches, so I think it was supposed to be delayed slightly due to issues sourcing the switches.

I'm pretty excited about this, because the CNC and finish looks amazing on the M10-A compared to most macropads/numpads. Except for my M4-A... :)


Oh man!!! Cannot wait for you to get your hands on it!

By the way, latest configurator can be downloaded here: https://github.com/machineindustries/configurator/releases

Post some pics when you get it :)

I certainly will, I might even dig out a proper camera instead of using my phone
Show Image


Please do!! Cheers
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5150
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #58 on: Wed, 12 April 2017, 21:31:16 »



Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #59 on: Thu, 13 April 2017, 12:13:20 »
Show Image


Show Image



AWWWWW HELLS YES!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline TelFiRE

  • Posts: 189
  • Location: Littleton, CO
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #60 on: Fri, 14 April 2017, 02:01:15 »
Was this gorgeous work a one-off good sir or will there be a second run?

Edit: oops sorry I'm impatient, saw your answer a few replies back, can't wait :D

I'm really really hoping to score this and have it next to a M65-A (if I can get ahold of it!) You make gorgeous stuff!!
« Last Edit: Fri, 14 April 2017, 02:27:48 by TelFiRE »
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #61 on: Fri, 14 April 2017, 02:51:59 »
Was this gorgeous work a one-off good sir or will there be a second run?

Edit: oops sorry I'm impatient, saw your answer a few replies back, can't wait :D

I'm really really hoping to score this and have it next to a M65-A (if I can get ahold of it!) You make gorgeous stuff!!

yup yup it's coming back!! stay tuned :)

Thanks so much mate - plenty more to come! :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline natbuns

  • Posts: 8
  • Location: Cincinnati,OH
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #62 on: Sun, 16 April 2017, 11:46:33 »
aw ye it finally came. I friggin love it. gonna go play some overwatch with it. :thumb:

Offline TelFiRE

  • Posts: 189
  • Location: Littleton, CO
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #63 on: Sun, 16 April 2017, 15:40:40 »
Duuuuude,
The TMX-INJECTOR looks amazing.. I guess that would replace a :~$ynth and has a built-in box so no need for legos right? I've been wanting to get into cap making, that looks great!

A bit sad to see no Goblin color on these SAs but sweet nonetheless. I'll go for a Moon. I don't suppose there'd be anyway to combine with the Goblin key I also bought? Not really a big deal, but thought I'd ask heh.
« Last Edit: Sun, 16 April 2017, 16:17:41 by TelFiRE »
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #64 on: Mon, 17 April 2017, 07:55:58 »
aw ye it finally came. I friggin love it. gonna go play some overwatch with it. :thumb:


Oh sweet! let me know how it is with OW :D

Duuuuude,
The TMX-INJECTOR looks amazing.. I guess that would replace a :~$ynth and has a built-in box so no need for legos right? I've been wanting to get into cap making, that looks great!

A bit sad to see no Goblin color on these SAs but sweet nonetheless. I'll go for a Moon. I don't suppose there'd be anyway to combine with the Goblin key I also bought? Not really a big deal, but thought I'd ask heh.


Hey cheers man! Yeah, built-in box too :)

Ahh sorry mate, won't be able to combine them since the R3 waves will be shipping much sooner than the SA waves :( You're going to love them though!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5150
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #65 on: Tue, 18 April 2017, 08:59:06 »


came as a surprise as i haven't paid customs yet :eek:

quality is nice, there are some machining marks, and i received 8 switches (instead of 10) but otherwise a nice product and i'm happy i joined

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #66 on: Tue, 18 April 2017, 20:46:18 »
Show Image


came as a surprise as i haven't paid customs yet :o

quality is nice, there are some machining marks, and i received 8 switches (instead of 10) but otherwise a nice product and i'm happy i joined

Oh hey!! You got it :) Glad you like it mate!

That's really no good that you received 8 switches instead of 10, contact Massdrop ASAP and they should sort that out for you! :)

Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #67 on: Sun, 23 April 2017, 03:09:08 »
Hey rama the top left hex bolt on the bottom doesn't tighten anymore...  The corresponding screw hole on the top piece of the metal housing shed some type of coating and now the threads don't catch the hex bolt when i try and screw it in.  It sounds like i am grinding something when i screw in the other ones and I am really concerned this will happen to them too... What is that and how can I fix this? 

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #68 on: Sun, 23 April 2017, 04:12:38 »
Hey rama the top left hex bolt on the bottom doesn't tighten anymore...  The corresponding screw hole on the top piece of the metal housing shed some type of coating and now the threads don't catch the hex bolt when i try and screw it in.  It sounds like i am grinding something when i screw in the other ones and I am really concerned this will happen to them too... What is that and how can I fix this?


Sounds like their may be beadblast material or something inside the threads - does it feel scratchy? Best to get some compressed air and blast it in to remove the particles
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline libertycannon

  • Posts: 59
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #69 on: Tue, 25 April 2017, 11:19:27 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #70 on: Tue, 25 April 2017, 20:11:01 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Sissy

  • Posts: 414
  • Location: Australia
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #71 on: Wed, 26 April 2017, 04:02:52 »
Just wanna say mine just arrived, no time to play around with it tonight but unboxed it and it looks perfect

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5150
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #72 on: Wed, 26 April 2017, 04:09:22 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #73 on: Wed, 26 April 2017, 07:59:13 »
Just wanna say mine just arrived, no time to play around with it tonight but unboxed it and it looks perfect


Cheers mate!!
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.
 


100% M3 screws, 0.5MM pitch, guaranteed! Not using DIN screws or something?
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5150
  • Location: United Kingdom
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #74 on: Wed, 26 April 2017, 08:12:36 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.
 


100% M3 screws, 0.5MM pitch, guaranteed! Not using DIN screws or something?

Hexagon A/F (aka the size of hex key you need) is different, guess I didn't notice before ;D

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #75 on: Wed, 26 April 2017, 08:14:09 »
thanks for the response! I will get some compressed air in there to clean out the others to prevent what happened to the stripped hole.  Can you tell me the size of the hex bolts or a reference so that i can go buy a longer bolt for the stripped hole? the threads at the bottom are still in tact but with the size of the bottom body piece, the original bolt is not long enough to reach l.


They're M3! I think you are supplied with M3x8, so anything longer then that should be sweet :) hope that helps!

They're M3? Uhhhhhhh... I thought they were M3.5/M4 as my M3 screws don't work with it.
 


100% M3 screws, 0.5MM pitch, guaranteed! Not using DIN screws or something?

Hexagon A/F (aka the size of hex key you need) is different, guess I didn't notice before ;D


Ohhh, yeah, different manufacturers may use different head sizes and allen sizes - but thread etc should be the same and it should screw right in :D
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline theasian

  • Posts: 12
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #76 on: Fri, 12 May 2017, 20:45:36 »
hit me with that round 2 Rama!

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #77 on: Sat, 13 May 2017, 08:35:23 »
hit me with that round 2 Rama!


soon soon (TM)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline GenKaan

  • * Destiny Supporter
  • Posts: 289
  • Location: The Matrix
  • Mer caps, mindre käbbel
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #78 on: Sat, 27 May 2017, 11:54:29 »
Just managed to get my hands on one, looking forward to testing it out once it gets here :)
Looks amazing based on the pictures
|| @Home:: Shine 3 TKL (Mx Red / Deep Space)  || @Work:: G2Pro (Mx Clear / Dye Sub PBT) ||
@Reserve:: HHKB (Topre 45g / Mixed PBT) // Das v3 (Mx Brown / Blank PBT)

Offline Arallu

  • Posts: 230
  • Location: USA
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #79 on: Sun, 11 June 2017, 18:23:35 »
hit me with that round 2 Rama!

soon soon (TM)

Wink wink nudge nudge!  :cool:

Offline rabbitfire

  • Posts: 231
  • Location: Rabbitfire102
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #80 on: Sun, 25 June 2017, 08:31:47 »

Offline Troif

  • Posts: 112
  • Location: Barcelona
  • Carpe Diem!!!
    • Daniel Ferrer
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #81 on: Mon, 26 June 2017, 11:37:03 »
I suppose round 2 will have the same pcb as the round1 or there are improvements? (please! let us know for us looking on second hand markets... or wait until r2!)
--
Filco TKL Ninja Blues / CODE Greens / Pok3r Clears / HHKBpro2 / RF 87U 55g / Novatouch TKL / KC60 Clears / SSK and also regular Model M

Offline KingRama

  • * Moderator
  • Thread Starter
  • Posts: 1171
  • Location: Melbourne, Australia
  • www.rama.works
    • RAMA WORKS®
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #82 on: Tue, 27 June 2017, 00:21:07 »
I suppose round 2 will have the same pcb as the round1 or there are improvements? (please! let us know for us looking on second hand markets... or wait until r2!)


Round 2 will most likely be a new PCB :)
Didn't notice my personal messages have been disabled for those thinking you have been blocked - to contact please reach out through Facebook messages or support email!
WEB: https://rama.works/
STORE: https://ramaworks.store/
INSTA: @ramaworks
FB: ramaworks

Offline Arallu

  • Posts: 230
  • Location: USA
Re: RAMA M10-A (NOW AVAILABLE)
« Reply #83 on: Fri, 04 August 2017, 20:50:35 »
...
« Last Edit: Tue, 03 July 2018, 10:10:47 by Arallu »