Author Topic: Post Your Polymer Salon Caps!  (Read 35351 times)

sleepy and 2 Guests are viewing this topic.

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Post Your Polymer Salon Caps!
« on: Fri, 09 December 2016, 16:56:28 »
Polymer Salon caps, made by fendent

I don't have too many right now but he's been making some awesome blanks and working on sculpted caps, the skull is a prototype of a sculpt he's still adding to.





People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #1 on: Fri, 09 December 2016, 16:57:09 »
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • * Esteemed Elder
  • Posts: 986
  • Location: Charleston, SC
  • Haha just kidding
Re: Post Your Polymer Salon Caps!
« Reply #2 on: Fri, 09 December 2016, 23:24:41 »
155127-0

Offline sek1ne

  • Posts: 212
  • Location: Vancouver BC
  • Sek-eye-n
Re: Post Your Polymer Salon Caps!
« Reply #3 on: Fri, 09 December 2016, 23:33:06 »
Polymer Salon caps, made by fendent

I don't have too many right now but he's been making some awesome blanks and working on sculpted caps, the skull is a prototype of a sculpt he's still adding to.

Show Image


Show Image


Those are some really nice blanks.
Biking is fun.

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline Halverson

  • Traitor Supreme
  • Posts: 6776
  • GIRLSHARK WIZBRO
Re: Post Your Polymer Salon Caps!
« Reply #5 on: Fri, 09 December 2016, 23:58:02 »
Digging them colors, boys!

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3030
  • Location: Death Star
Re: Post Your Polymer Salon Caps!
« Reply #6 on: Sat, 10 December 2016, 03:46:18 »
nice nice <3
Quote
Women always figure out the truth. Always. - Han Solo

Offline shinz0

  • Posts: 281
  • Location: California
  • i was told there would be cake
Re: Post Your Polymer Salon Caps!
« Reply #7 on: Tue, 28 March 2017, 13:14:15 »
<3 Murray



thank you for such an amazing cap Fendent!

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #8 on: Wed, 29 March 2017, 17:20:47 »
<3 Murray

Show Image


thank you for such an amazing cap Fendent!

The encap skulls are awesome!

Here's my Quinntescence version, the color isn't too accurate but the skull is dark purple, the eye is bright pink, and the encap is a similar purple to yours.

164269-0
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline nmur

  • ಠ_ಠ
  • Posts: 1434
  • Location: Sydney
Re: Post Your Polymer Salon Caps!
« Reply #9 on: Wed, 29 March 2017, 17:26:28 »
dude i love caps that use a regular cap as their base shape (eg a clack skull, keythulu)

first time hearing or seeing any of these but those encapsulated skulls are great for not disturbing the profile of the whole keyboard. so sick
wtb/wttf: milk blue clack (t), blank blue realforce set

Offline shinz0

  • Posts: 281
  • Location: California
  • i was told there would be cake
Re: Post Your Polymer Salon Caps!
« Reply #10 on: Wed, 29 March 2017, 17:39:33 »

<3 Murray

Show Image


thank you for such an amazing cap Fendent!

The encap skulls are awesome!

Here's my Quinntescence version, the color isn't too accurate but the skull is dark purple, the eye is bright pink, and the encap is a similar purple to yours.

(Attachment Link)

Oh my. Yours is a magnificent specimen :)

What blanks are those?

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #11 on: Wed, 29 March 2017, 17:40:06 »
dude i love caps that use a regular cap as their base shape (eg a clack skull, keythulu)

first time hearing or seeing any of these but those encapsulated skulls are great for not disturbing the profile of the whole keyboard. so sick

I completely agree, Keythulhu V1s are one of my favorite artisans partially due to the profile.

The encap skulls almost hide when you put them on a board.

164271-0
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #12 on: Wed, 29 March 2017, 17:44:59 »

<3 Murray

Show Image


thank you for such an amazing cap Fendent!

The encap skulls are awesome!

Here's my Quinntescence version, the color isn't too accurate but the skull is dark purple, the eye is bright pink, and the encap is a similar purple to yours.

(Attachment Link)

Oh my. Yours is a magnificent specimen :)

What blanks are those?

The lighter 6 pearlescent purple caps (one is a bit hidden) are Shadowcaps
Top right esc and top left fn are MF
The control, esc to the left of the skull, and the fn below said esc are from Booper
The esc above the skull and the remaining 3 caps are from Fendent

Sorry if that's a bit confusing but I don't have time to number them in photoshop for a list right now.
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline nmur

  • ಠ_ಠ
  • Posts: 1434
  • Location: Sydney
Re: Post Your Polymer Salon Caps!
« Reply #13 on: Wed, 29 March 2017, 17:45:01 »
dude i love caps that use a regular cap as their base shape (eg a clack skull, keythulu)

first time hearing or seeing any of these but those encapsulated skulls are great for not disturbing the profile of the whole keyboard. so sick

I completely agree, Keythulhu V1s are one of my favorite artisans partially due to the profile.

The encap skulls almost hide when you put them on a board.

(Attachment Link)

god damn

looks like it's underwater

can't believe i've missed these this whole time. i usually dismiss the newer artisans' threads, but this dude's got it down
wtb/wttf: milk blue clack (t), blank blue realforce set

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #14 on: Wed, 29 March 2017, 17:52:18 »
I completely agree, Keythulhu V1s are one of my favorite artisans partially due to the profile.

The encap skulls almost hide when you put them on a board.

(Attachment Link)

god damn

looks like it's underwater

IIRC fendent has tried something along those lines for other colorways, he has some cool stuff in the works.

can't believe i've missed these this whole time. i usually dismiss the newer artisans' threads, but this dude's got it down

I have a habit of doing the same until I see caps in person but I wouldn't overlook fendent. Every cap I have from him is great quality and he puts in a lot of qc and experimenting time to get the caps to look how he wants them. Since I've started talking to him he's gone through at least 4 or 5 different stem designs because they didn't work exactly how he wanted them to from a fitment and production standpoint.
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline ghostdeini

  • Posts: 114
  • Location: CT, USA
Re: Post Your Polymer Salon Caps!
« Reply #15 on: Fri, 31 March 2017, 17:39:41 »

The encap skulls are awesome!

Here's my Quinntescence version, the color isn't too accurate but the skull is dark purple, the eye is bright pink, and the encap is a similar purple to yours.

(Attachment Link)

damn joey and shinz, those look fabulous. I'm wondering if Murray the skull is a monkey island reference...

Online csmertx

  • proprietor of waffles
  • * Elevated Elder
  • Posts: 2638
  • Location: Gainesville, FL
  • Perfectly normal beast
    • https://csmertx.github.io
Re: Post Your Polymer Salon Caps!
« Reply #16 on: Fri, 31 March 2017, 17:58:30 »
Oh man. Those floating skulls tho :eek:
More
 / another 3d keyboard model thread / BSD thread / github / falotalt
Quote
...Especially the Florida cousins, who obviously can't take a hint.

Offline fendent

  • * Maker
  • Posts: 251
  • Location: Cackalack
Re: Post Your Polymer Salon Caps!
« Reply #17 on: Sun, 02 April 2017, 18:36:58 »

The encap skulls are awesome!

Here's my Quinntescence version, the color isn't too accurate but the skull is dark purple, the eye is bright pink, and the encap is a similar purple to yours.

(Attachment Link)

damn joey and shinz, those look fabulous. I'm wondering if Murray the skull is a monkey island reference...

It is. :))

Offline Zanduby

  • Posts: 397
  • Location: Salt Lake City
Re: Post Your Polymer Salon Caps!
« Reply #18 on: Mon, 03 April 2017, 10:07:51 »
Yee, can't wait!

Online iamtootallforthis

  • Something a lot Funnier
  • * Global Moderator
  • Posts: 4582
  • Location: West Palm Beach, FL
  • I like green stuffs.
    • WTB/WTTF Thread
Re: Post Your Polymer Salon Caps!
« Reply #19 on: Fri, 14 April 2017, 22:08:40 »

Offline StickyBlueJuice

  • Posts: 1131
  • Location: Denmark / Deliverance
  • Tactile pls
    • gNUBBi
Re: Post Your Polymer Salon Caps!
« Reply #20 on: Fri, 14 April 2017, 23:04:03 »
<3 Murray

Show Image


thank you for such an amazing cap Fendent!
Amazing key cap!

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #21 on: Tue, 18 April 2017, 23:31:53 »
Don't know why I haven't done this side by side yet.

Murray and the MX prototype that turned into Murray.

People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline Jokrik

  • * Destiny Supporter
  • Posts: 3030
  • Location: Death Star
Re: Post Your Polymer Salon Caps!
« Reply #22 on: Fri, 26 May 2017, 07:52:20 »

Fendentkeys by Hanshen, on Flickr


Fendentkeys-2 by Hanshen, on Flickr


Fendentkeys-3 by Hanshen, on Flickr

It's been a while since I'm excited on a new design <3
beautiful beautiful cap
Quote
Women always figure out the truth. Always. - Han Solo

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #23 on: Wed, 19 July 2017, 22:47:18 »
More Murray pictures coming later

People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline ArchDill

  • * Esteemed Elder
  • Posts: 1235
  • Location: OK
Re: Post Your Polymer Salon Caps!
« Reply #24 on: Wed, 19 July 2017, 22:52:58 »
More Murray pictures coming later

Show Image


Woah! I have not seen this one. So rad!

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #25 on: Wed, 19 July 2017, 23:01:44 »
More Murray pictures coming later

Show Image


Woah! I have not seen this one. So rad!

This (Ultra Ether) and the blue GID (Drowned Fool) are just a taste of what fendent has in the works right now.
« Last Edit: Wed, 19 July 2017, 23:17:06 by Joey Quinn »
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #26 on: Wed, 19 July 2017, 23:08:42 »
More Murray pictures coming later

Show Image


Damn. That's a real nice Murray right there.  :eek:
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline suntorywhisky

  • Posts: 121
    • IG
Re: Post Your Polymer Salon Caps!
« Reply #27 on: Sat, 26 August 2017, 12:32:20 »

Offline reaper

  • ** Moderator Emeritus
  • Posts: 2958
Re: Post Your Polymer Salon Caps!
« Reply #28 on: Sat, 26 August 2017, 19:38:57 »
 :)

Love the cap.. very difficult to capture.  Love the Hi-chew.. still have some stuck to my teeth!




« Last Edit: Sat, 26 August 2017, 20:02:33 by reaper »
Att fly är livet, att dröja, döden.
Din Eli

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #29 on: Fri, 06 October 2017, 22:34:14 »

« Last Edit: Fri, 06 October 2017, 23:32:01 by ygor »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #30 on: Tue, 12 December 2017, 10:09:20 »




« Last Edit: Thu, 14 December 2017, 01:42:54 by ygor »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #31 on: Mon, 12 February 2018, 16:42:44 »
cd\
cd polymersalon
revive.exe



« Last Edit: Mon, 12 February 2018, 17:02:50 by ygor »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline The_judge_168

  • Posts: 234
Re: Post Your Polymer Salon Caps!
« Reply #32 on: Wed, 14 February 2018, 23:31:56 »
cd\
cd polymersalon
revive.exe

Show Image

Show Image


Nice shots of a nice cap!

Offline Cocopah

  • Posts: 268
  • Location: Socal
  • Lurker Extraordinaire
Re: Post Your Polymer Salon Caps!
« Reply #33 on: Wed, 14 February 2018, 23:45:09 »
First win!

Offline godinjointform

  • * Destiny Supporter
  • Posts: 159
Re: Post Your Polymer Salon Caps!
« Reply #34 on: Wed, 14 February 2018, 23:50:14 »
Making breakfast

Offline dgneo

  • Supervillain
  • * Curator
  • Posts: 2026
Re: Post Your Polymer Salon Caps!
« Reply #35 on: Thu, 15 February 2018, 07:02:30 »
.
« Last Edit: Mon, 19 March 2018, 10:00:16 by dgneo »
Down go the system, long live the king,
Turn the power off and get your water from the spring.

Offline Corgi Butts

  • Posts: 305
Re: Post Your Polymer Salon Caps!
« Reply #36 on: Thu, 15 February 2018, 08:02:57 »
I think there's something stuck in my teeth...


Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #37 on: Thu, 08 March 2018, 00:31:00 »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #38 on: Thu, 08 March 2018, 16:18:50 »
« Last Edit: Thu, 08 March 2018, 18:17:08 by ygor »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline TheEerieCold

  • Posts: 152
  • Location: VA, USA
Re: Post Your Polymer Salon Caps!
« Reply #39 on: Thu, 08 March 2018, 23:09:32 »



Online hayt

  • * Maker
  • Posts: 726
  • Location: Atlanta
Re: Post Your Polymer Salon Caps!
« Reply #40 on: Tue, 13 March 2018, 15:33:13 »
191467-0

Online brianjking

  • Posts: 185
  • Location: Chicago, IL
  • always carry a towel.
    • @brianjking
Re: Post Your Polymer Salon Caps!
« Reply #41 on: Sun, 15 April 2018, 20:03:36 »







TGR 910 (Healios) | HHKB BT KBDFans Silence-X | Roadkit (Cherry MX Silent Blacks) |Leopold FC750r (Cherry MX Silent Reds |TADA68 (Zealios) | HHKB Pro 2 Type-S w/ Hasu BT | HHKB Pro 2 JP w/ Hasu BT & KBDFans Silence-X | RAMA M10-A w/ Zealios TINA-C w/ Cherry MX Silent Blacks HHKB BT Type-S

Offline Topernicus

  • Posts: 36
Re: Post Your Polymer Salon Caps!
« Reply #42 on: Sat, 21 April 2018, 13:04:55 »
Gunpowder...

Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #43 on: Tue, 24 April 2018, 02:06:06 »
A little backlit action  :thumb:




Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #44 on: Tue, 24 April 2018, 17:03:29 »
Show Image


Insanely cool shot dude!
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #45 on: Tue, 24 April 2018, 19:42:08 »
Show Image


Insanely cool shot dude!

Thanks Joey! I wish I'd have let the foil continue forward under the lens... Bothers me that it's following the edge of the table on the bottom of the shot.  :-[
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #46 on: Wed, 06 June 2018, 21:55:44 »
I know the Murrays can be hard to photograph but this thread needs a bump!  :thumb:


Offline sinkingstepz

  • Posts: 23
  • Location: California
Re: Post Your Polymer Salon Caps!
« Reply #47 on: Wed, 06 June 2018, 22:00:08 »
I know the Murrays can be hard to photograph but this thread needs a bump!  :thumb:

Show Image


WHEW SEEDY  :thumb:

Online crystalflame

  • Posts: 30
Re: Post Your Polymer Salon Caps!
« Reply #48 on: Wed, 06 June 2018, 23:42:04 »

Getting good lighting on this guy was quite the challenge.

Offline mangoes

  • Posts: 22
  • Location: Orlando, Florida
Re: Post Your Polymer Salon Caps!
« Reply #49 on: Wed, 06 June 2018, 23:57:42 »
Seedy how many damn Murrays do you have

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #50 on: Thu, 07 June 2018, 00:17:46 »
I know the Murrays can be hard to photograph but this thread needs a bump!  :thumb:

Show Image

Damn, the crystal clear ones are nuts. I love how the skull gets magnified
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #51 on: Thu, 07 June 2018, 01:50:30 »
Seedy how many damn Murrays do you have

Not enough  :cool:

Offline LiL_BrOwNiE247

  • Posts: 26
  • Location: United States
Re: Post Your Polymer Salon Caps!
« Reply #52 on: Thu, 07 June 2018, 09:26:36 »
I know the Murrays can be hard to photograph but this thread needs a bump!  :thumb:

Show Image


Damn Seedy, nice get! That looks like a perfect match for Dolch.
Also you're right about Murrays being hard to photograph, this was the best I could do after 20 minutes of messing around with my high-end setup consisting of my phone and a $20 clip-on lens:

« Last Edit: Thu, 07 June 2018, 22:25:14 by LiL_BrOwNiE247 »

Offline Nomcr

  • Posts: 26
Re: Post Your Polymer Salon Caps!
« Reply #53 on: Thu, 07 June 2018, 13:31:49 »
Gunpowder :)


Sent from my iPhone using Tapatalk

Offline carnagex9

  • Posts: 20
Re: Post Your Polymer Salon Caps!
« Reply #54 on: Thu, 07 June 2018, 21:09:01 »

Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #55 on: Thu, 07 June 2018, 22:02:31 »
I know the Murrays can be hard to photograph but this thread needs a bump!  :thumb:

Show Image


Damn Seedy, nice get! That looks like a perfect match for Dolch.
Also you're right about Murrays being hard to photograph, this was the best I could do after 20 minutes of messing around with my high-end setup consisting of my phone and a $20 clip-on lens:

Show Image


That's a good thought, I didn't even think to throw it on my Dolch 65% board. I'll have to dig that out! As for your pic, it doesn't appear to be showing up. Perhaps something with the google link. Maybe try throwing it up on Imgur?

Offline LiL_BrOwNiE247

  • Posts: 26
  • Location: United States
Re: Post Your Polymer Salon Caps!
« Reply #56 on: Thu, 07 June 2018, 22:25:47 »
I know the Murrays can be hard to photograph but this thread needs a bump!  :thumb:

Show Image


Damn Seedy, nice get! That looks like a perfect match for Dolch.
Also you're right about Murrays being hard to photograph, this was the best I could do after 20 minutes of messing around with my high-end setup consisting of my phone and a $20 clip-on lens:

Show Image


That's a good thought, I didn't even think to throw it on my Dolch 65% board. I'll have to dig that out! As for your pic, it doesn't appear to be showing up. Perhaps something with the google link. Maybe try throwing it up on Imgur?

Just rehosted on imgur, should be able to view it now!

Online hayt

  • * Maker
  • Posts: 726
  • Location: Atlanta
Re: Post Your Polymer Salon Caps!
« Reply #57 on: Thu, 07 June 2018, 23:13:36 »
smoke purp

197556-0

Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #58 on: Fri, 08 June 2018, 00:07:10 »
Just rehosted on imgur, should be able to view it now!

Yep, looking good!

smoke purp (Attachment Link)

Whew, love that purp! Nice shot!

Offline Skaazi

  • Posts: 30
Re: Post Your Polymer Salon Caps!
« Reply #59 on: Fri, 08 June 2018, 02:21:52 »

Offline godinjointform

  • * Destiny Supporter
  • Posts: 159
Re: Post Your Polymer Salon Caps!
« Reply #60 on: Fri, 08 June 2018, 11:10:31 »
Couple of my favorites:

smoke purp

a murky, old one

Online flameray

  • Posts: 23
Re: Post Your Polymer Salon Caps!
« Reply #61 on: Fri, 08 June 2018, 11:49:17 »
Murray I won from a giveaway  ^-^

Offline NJWootton

  • Posts: 21
Re: Post Your Polymer Salon Caps!
« Reply #62 on: Fri, 08 June 2018, 12:24:37 »
I know the Murrays can be hard to photograph but this thread needs a bump!  :thumb:

Show Image


Damn Seedy, nice get! That looks like a perfect match for Dolch.
Also you're right about Murrays being hard to photograph, this was the best I could do after 20 minutes of messing around with my high-end setup consisting of my phone and a $20 clip-on lens:

Show Image


Ooooooo that looks like it would match my Organelle V2 very nicely

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #63 on: Fri, 08 June 2018, 14:19:39 »
Couple of my favorites:
Show Image

smoke purp
Show Image

a murky, old one

So Fkn Lit
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline dgneo

  • Supervillain
  • * Curator
  • Posts: 2026
Re: Post Your Polymer Salon Caps!
« Reply #64 on: Fri, 08 June 2018, 14:23:00 »




apparently never posted these here
Down go the system, long live the king,
Turn the power off and get your water from the spring.

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #65 on: Fri, 08 June 2018, 14:41:42 »
Show Image


Show Image


apparently never posted these here

Damn, dg. Nice fkn sneps.
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8783
  • Location: The Windy City
Re: Post Your Polymer Salon Caps!
« Reply #66 on: Fri, 08 June 2018, 14:49:58 »
Any blanks avail[able]?

Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #67 on: Sat, 23 June 2018, 03:22:23 »
Not technically mine, late night proxy shot though :cool:


Offline Topernicus

  • Posts: 36
Re: Post Your Polymer Salon Caps!
« Reply #68 on: Mon, 09 July 2018, 20:44:06 »
199737-0

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #69 on: Mon, 09 July 2018, 22:30:35 »
(Attachment Link)

Love your use of a UV light to make the eye glow

Overall insane picture
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #70 on: Sat, 04 August 2018, 01:58:26 »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #71 on: Sun, 05 August 2018, 22:29:46 »


luv (sic.) pt 3
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline The_judge_168

  • Posts: 234
Re: Post Your Polymer Salon Caps!
« Reply #72 on: Mon, 06 August 2018, 15:25:15 »
Show Image


luv (sic.) pt 3

Nice shot! rest in beats

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #73 on: Mon, 06 August 2018, 15:33:51 »
Show Image


luv (sic.) pt 3

Dank, dank, dank.
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline dgneo

  • Supervillain
  • * Curator
  • Posts: 2026
Down go the system, long live the king,
Turn the power off and get your water from the spring.

Online brianjking

  • Posts: 185
  • Location: Chicago, IL
  • always carry a towel.
    • @brianjking
Re: Post Your Polymer Salon Caps!
« Reply #75 on: Wed, 08 August 2018, 17:38:46 »
TGR 910 (Healios) | HHKB BT KBDFans Silence-X | Roadkit (Cherry MX Silent Blacks) |Leopold FC750r (Cherry MX Silent Reds |TADA68 (Zealios) | HHKB Pro 2 Type-S w/ Hasu BT | HHKB Pro 2 JP w/ Hasu BT & KBDFans Silence-X | RAMA M10-A w/ Zealios TINA-C w/ Cherry MX Silent Blacks HHKB BT Type-S

Online hayt

  • * Maker
  • Posts: 726
  • Location: Atlanta
Re: Post Your Polymer Salon Caps!
« Reply #76 on: Fri, 17 August 2018, 18:41:49 »
Lizard Breath :fire:

202137-0

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #77 on: Fri, 24 August 2018, 04:12:00 »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline godinjointform

  • * Destiny Supporter
  • Posts: 159
Re: Post Your Polymer Salon Caps!
« Reply #78 on: Sun, 02 September 2018, 00:04:59 »
Al-Khadir & Surgical Boop Job

Boy that Boop collab is hard to capture. It looks like it's fading out Marty McFly-style  :p

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #79 on: Sat, 08 September 2018, 15:44:10 »


Kraken Breath Murray
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline superdoedoe

  • Posts: 358
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: Post Your Polymer Salon Caps!
« Reply #80 on: Wed, 03 October 2018, 21:59:16 »
Just a handful

( ͡° ͜ʖ ͡°)  

Offline godinjointform

  • * Destiny Supporter
  • Posts: 159
Re: Post Your Polymer Salon Caps!
« Reply #81 on: Thu, 04 October 2018, 20:54:25 »
Just a handful

Show Image

ok what the ****

Online SJHL

  • Posts: 258
Re: Post Your Polymer Salon Caps!
« Reply #82 on: Mon, 22 October 2018, 15:26:28 »


My first Murray; Goblin.

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8783
  • Location: The Windy City
Re: Post Your Polymer Salon Caps!
« Reply #83 on: Mon, 22 October 2018, 23:45:34 »
I remember when I held my first fundent...

Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #84 on: Wed, 31 October 2018, 01:52:42 »
Show Image


My first Murray; Goblin.

So dank. Congrats!
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #85 on: Sat, 03 November 2018, 00:17:27 »


A Horcrux of Joey Quinn - captured within is his essence...!
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline ygor

  • Posts: 387
  • Location: 559/697*65/*598
  • eat a butt, monkey lord
Re: Post Your Polymer Salon Caps!
« Reply #86 on: Wed, 07 November 2018, 23:07:49 »
I generally hate all keycaps. Keycaps are for poofs. Real men touchtype on stems. Non-functional artisans are awesome, I use them for the ESC key ... escape is for cowards anyways, real men go frontal assault.

Offline Joey Quinn

  • Thread Starter
  • Posts: 4526
  • Location: Houghton
  • "..."
Re: Post Your Polymer Salon Caps!
« Reply #87 on: Sun, 11 November 2018, 16:50:29 »
207052-0

207054-1
People in the 1980s, in general, were clearly just better than we are now in every measurable way.

The dumber the reason the more it must be done

Offline superdoedoe

  • Posts: 358
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: Post Your Polymer Salon Caps!
« Reply #88 on: Mon, 03 December 2018, 21:24:56 »
( ͡° ͜ʖ ͡°)  

Online brianjking

  • Posts: 185
  • Location: Chicago, IL
  • always carry a towel.
    • @brianjking
Re: Post Your Polymer Salon Caps!
« Reply #89 on: Tue, 11 December 2018, 13:54:36 »
TGR 910 (Healios) | HHKB BT KBDFans Silence-X | Roadkit (Cherry MX Silent Blacks) |Leopold FC750r (Cherry MX Silent Reds |TADA68 (Zealios) | HHKB Pro 2 Type-S w/ Hasu BT | HHKB Pro 2 JP w/ Hasu BT & KBDFans Silence-X | RAMA M10-A w/ Zealios TINA-C w/ Cherry MX Silent Blacks HHKB BT Type-S

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #90 on: Tue, 18 December 2018, 20:56:10 »


Enchanted Murray & Stacked Murray

with some friends
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline Elth

  • Posts: 370
  • Location: California
  • Easy now fuzzy little man peach
Re: Post Your Polymer Salon Caps!
« Reply #91 on: Wed, 19 December 2018, 22:02:51 »
TGR 910 | TGR Jane CE

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #92 on: Wed, 19 December 2018, 23:00:09 »
Show Image

Black Diamond

Show Image

Shminty

Oh boi, my jealousy levels are rising for that Black Diamond. Great gets :')
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Online dustinhxc

  • * Exalted Elder
  • Posts: 6559
  • Location: MN
  • GAF x KK
    • Gray Designs
Re: Post Your Polymer Salon Caps!
« Reply #93 on: Thu, 20 December 2018, 04:11:50 »
Just a handful

Show Image


These sure are interesting, a skull trapped in a keycap.  :eek: Rad!!! :)
« Last Edit: Sun, 10 February 2019, 05:43:32 by dustinhxc »

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #94 on: Wed, 02 January 2019, 23:42:43 »
Purp Zero

WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline ricrackem

  • Posts: 50
  • Location: US-CT
Re: Post Your Polymer Salon Caps!
« Reply #95 on: Fri, 04 January 2019, 11:24:57 »




Finally managed to get some okay shots of my favorite cap  :thumb:

Offline superdoedoe

  • Posts: 358
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: Post Your Polymer Salon Caps!
« Reply #96 on: Mon, 07 January 2019, 04:15:23 »
Show Image


Show Image


Finally managed to get some okay shots of my favorite cap  :thumb:

 :p
( ͡° ͜ʖ ͡°)  

Online sleepy

  • Formerly palth
  • Posts: 135
Re: Post Your Polymer Salon Caps!
« Reply #97 on: Sat, 12 January 2019, 16:27:14 »

Offline godinjointform

  • * Destiny Supporter
  • Posts: 159
Re: Post Your Polymer Salon Caps!
« Reply #98 on: Tue, 22 January 2019, 13:06:30 »
some funky old caps

Offline ReverbSlush

  • Posts: 191
  • 16/52 RNG score
Re: Post Your Polymer Salon Caps!
« Reply #99 on: Thu, 24 January 2019, 19:05:13 »
I'm not good with taking pics, but I had a great mail day today!

Offline Topernicus

  • Posts: 36
Re: Post Your Polymer Salon Caps!
« Reply #100 on: Fri, 25 January 2019, 10:28:32 »
211373-0

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1294
  • Location: 白い帽子
  • greyhat co-leader
Re: Post Your Polymer Salon Caps!
« Reply #101 on: Wed, 30 January 2019, 21:34:46 »
[quot author=Topernicus link=topic=86308.msg2714004#msg2714004 date=1548433712]
[ Attachment Invalid Or Does Not Exist ]
[/quote]

That's the most lit Murray I ever seen tf :cool:

Offline ArchDill

  • * Esteemed Elder
  • Posts: 1235
  • Location: OK

Offline ReverbSlush

  • Posts: 191
  • 16/52 RNG score
Re: Post Your Polymer Salon Caps!
« Reply #103 on: Thu, 07 February 2019, 10:34:15 »
Mary, bright, spookums, and Al-K at home on a TMO50   





Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #104 on: Thu, 07 February 2019, 10:35:13 »
Mary, bright, spookums, and Al-K at home on a TMO50   


Show Image




Wew that Spookums O_O
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Online dustinhxc

  • * Exalted Elder
  • Posts: 6559
  • Location: MN
  • GAF x KK
    • Gray Designs
Re: Post Your Polymer Salon Caps!
« Reply #105 on: Sat, 02 March 2019, 03:49:51 »
Show Image
Pumpking Murray by Polymer Salon by Brian King, on Flickr


Show Image
Pumpking Murray by Polymer Salon by Brian King, on Flickr

This is amazing. Wonderful photos man! Cant wait to get my Pumpking in the mail.  :)

Offline Colourr

  • Posts: 45
  • Location: Ontario
  • no worries
Re: Post Your Polymer Salon Caps!
« Reply #106 on: Sat, 02 March 2019, 10:32:32 »
Lizard Breath Murray

214038-0



« Last Edit: Sat, 02 March 2019, 10:36:02 by Colourr »

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #107 on: Tue, 19 March 2019, 08:19:36 »
Icedream Murray


WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline Sifo

  • Swaglord Yolomancer
  • * Exquisite Elder
  • Posts: 6754
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • I like blue.
Re: Post Your Polymer Salon Caps!
« Reply #108 on: Tue, 19 March 2019, 09:51:16 »
oh i didn't see this thread sheeeeyit i should cross post



(Forever) Illustrious.


Offline Hodgeman

  • Posts: 26
  • Location: TX
Re: Post Your Polymer Salon Caps!
« Reply #109 on: Tue, 02 April 2019, 15:27:18 »


Orion Murray !

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #110 on: Sat, 13 April 2019, 00:18:22 »



WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #111 on: Sat, 25 May 2019, 19:12:06 »
Glimmer Ghost...



WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #112 on: Mon, 22 July 2019, 16:08:31 »


Dat texture doe  :eek:
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #113 on: Sat, 03 August 2019, 20:14:52 »
Murray Gauntlet complete  :thumb:


Offline ReverbSlush

  • Posts: 191
  • 16/52 RNG score
Re: Post Your Polymer Salon Caps!
« Reply #114 on: Tue, 06 August 2019, 06:18:10 »
trying to get that Murray profile set...


Offline Nightcrawler

  • Posts: 406
Re: Post Your Polymer Salon Caps!
« Reply #115 on: Tue, 06 August 2019, 07:37:22 »
trying to get that Murray profile set...

Show Image


Oh, wow!

Online LightningXI

  • * Elevated Elder
  • Posts: 2625
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Post Your Polymer Salon Caps!
« Reply #116 on: Tue, 06 August 2019, 15:24:04 »
trying to get that Murray profile set...

Show Image

Whew lad
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline SeedyOne

  • Posts: 337
  • Location: Los Angeles
Re: Post Your Polymer Salon Caps!
« Reply #117 on: Tue, 06 August 2019, 19:21:00 »
We're gonna need a bigger pic as you progress!