Author Topic: JunkDrawer KeyCaps - Working on Stuff :D  (Read 28240 times)

0 Members and 1 Guest are viewing this topic.

Offline SQneo

  • Posts: 0
Re: JunkDrawer KeyCaps - Sale Over (invoices out)
« Reply #50 on: Sun, 23 April 2017, 11:07:25 »
no invoice :( hopefully I'll get something next time!

Offline KarkarnRed

  • Posts: 0
Re: JunkDrawer KeyCaps - Sale Over (invoices out)
« Reply #51 on: Sun, 23 April 2017, 12:14:50 »
Won my first raffle, can't wait :)

Offline VodkaSurprise

  • Posts: 1
Re: JunkDrawer KeyCaps - Sale Over (invoices out)
« Reply #52 on: Sun, 23 April 2017, 12:32:27 »
Paid, and thank you for the kind words!  :)

Offline TelFiRE

  • Posts: 185
  • Location: Littleton, CO
Re: JunkDrawer KeyCaps - Sale Over (invoices out)
« Reply #53 on: Sun, 23 April 2017, 16:50:29 »
Thanks for the invoice. Looking forward to finding out what I got!
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Sale Over (invoices out)
« Reply #54 on: Sun, 23 April 2017, 20:25:44 »
Invoice paid! And chestie is my favorite too  ;D

For the transparent ones, perhaps you can put some nice little things inside so it looks something like this?


(Attachment Link)
(Attachment Link)


Or just make it look like a real pirate treasure chest with gold coins, tiny skull and swords logo  :p

We actually are trying to do that already... this guy was a somewhat failed version of that experiment that is now sitting on my keyboard, I call him Oracle Chestie. :D we are getting better at putting stuff inside of the chesties, though, and will probably try and integrate that when possible. The only problem is making tiny things to go inside! I have a couple molds going with tiny hearts and stuff I made out of clay, but coins with detail might be a bit more challenging.
166744-0
« Last Edit: Sun, 23 April 2017, 20:48:03 by Midnight2shayla »
Sculpt Happy

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Sale Over (invoices out)
« Reply #55 on: Sun, 23 April 2017, 20:26:38 »
Woke up to an invoice, yay!

Congratulations :D I hope you like them!
Sculpt Happy

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Sale Over (invoices out)
« Reply #56 on: Sun, 23 April 2017, 20:34:26 »
no invoice :( hopefully I'll get something next time!

I'm sorry... we had a really small amount of keys this time and tried to spread the love as much as possible... Hey, if there are any left over there will be a re-raffle on Tuesday :) if not, we will be doing another sale whenever we are able to build up a bit of stock again.

Won my first raffle, can't wait :)

Congratulations :D I hope you like them! Also, welcome to the addiction!

Paid, and thank you for the kind words!  :)

You're welcome! Seriously, best combo ever. It was like 3am, we were both dead, and my husband read it to me - probably helped us get through the rest lol.

Thanks for the invoice. Looking forward to finding out what I got!

Thanks for your interest and support! :D I hope you like them!
Sculpt Happy

Offline Cavemann6

  • Posts: 71
  • Location: San Diego
Yaah, thank you!  ;D

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Hi guys!
We had a couple of unpaid invoices, so we will be re-distributing those caps soon by going through and choosing people who didn't win the first time around. Good luck! <3
Sculpt Happy

Online OneNightFriend

  • Posts: 246
  • Location: US-LA
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #59 on: Mon, 01 May 2017, 17:32:09 »
Got'em in!

Offline VodkaSurprise

  • Posts: 1
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #60 on: Mon, 01 May 2017, 20:37:23 »
Knew the bunnies were called Cadbury, so put them on my board once I opened the bag.



Opened the plastic eggs and instructions became clearer.



Top right was named Aragog by kiddo the elder and is in his long-term residence. Orange fellow will find a home in time.

Sulley (suggested to kiddo the younger who's in a Monsters Inc phrase, who agreed) and Rabsynthe are in their long-term residence; now waiting for the Matt3o set to arrive in a few months :P

Now have 5 spider keys; I'm sure they'll come in useful for browsing the web.
« Last Edit: Mon, 01 May 2017, 20:41:03 by VodkaSurprise »

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #61 on: Mon, 01 May 2017, 22:27:47 »
Got'em in!
Show Image


:D loving the pictures, I'm glad you like them - and I'm glad that you won a couple given your excitement in the thread, it made me very happy.

Knew the bunnies were called Cadbury, so put them on my board once I opened the bag.

Show Image


Opened the plastic eggs and instructions became clearer.

Show Image


Top right was named Aragog by kiddo the elder and is in his long-term residence. Orange fellow will find a home in time.

Sulley (suggested to kiddo the younger who's in a Monsters Inc phrase, who agreed) and Rabsynthe are in their long-term residence; now waiting for the Matt3o set to arrive in a few months :P

Now have 5 spider keys; I'm sure they'll come in useful for browsing the web.

Army of Spideys! I love the name Sulley, it fits him perfectly, plus Monsters Inc was an awesome movie - and Aragog is a great fit, too :).
I can't wait for ours to be old enough to name our keys :D

Thanks for the awesome pictures, the technical half (Wylte) was very excited about the Cadbury puns, I honestly completely missed it the first time lol - we had like 3 trays of cadbury eggs before it dawned on me.
Sculpt Happy

Offline Cavemann6

  • Posts: 71
  • Location: San Diego
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #62 on: Mon, 01 May 2017, 22:34:25 »
The caps I won from the giveaway and raffle came in today! Thanks again for an awesome raffle and letting me pick the colors for the giveaway cap, I finally have a cap to replace the fn key!  ;D

« Last Edit: Mon, 01 May 2017, 22:35:59 by Cavemann6 »

Offline TelFiRE

  • Posts: 185
  • Location: Littleton, CO
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #63 on: Mon, 01 May 2017, 22:41:29 »
Got mine today. Really cute sculpts. I'm a bit sad though because there's no possible way for me to use Chestie :( He is just too big, mainly in front but really on all sides. The bezel conflicts with him anywhere I try to put him.



And if I go to the \| key or tab, it just doesn't fit between the keys above and below. Really hope to see a slightly smaller future version of this sculpt because I really really like it.



The Spideys are too big for 1u too, honestly. I can't put them next to any other artisan, and even next to standard profile they scratch against them when actuated. However, I think they work awesomely as a 1.25u key. So I am really loving and enjoying them for my Windows and Function keys :D





(And yeah my keys are in weird spots, mainly to be able to share muscle memory between Windows and macOS)

I'm super sorry if this post seems overly negative, I'm not trying to be, I do love your work. Just want to give you constructive photos to help you improve your caps!

Still very glad I joined, thank you :)
« Last Edit: Wed, 03 May 2017, 00:48:40 by TelFiRE »
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Online OneNightFriend

  • Posts: 246
  • Location: US-LA
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #64 on: Mon, 01 May 2017, 23:26:58 »


:D loving the pictures, I'm glad you like them - and I'm glad that you won a couple given your excitement in the thread, it made me very happy.

Definitely! I was surprised to find I was the first to post a picture! I like the yeti and look forward to your future iterations on him and chesty!


Offline Wylte

  • Posts: 16
  • Location: US-WA
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #65 on: Tue, 02 May 2017, 02:54:56 »
Got mine today. Really cute sculpts. I'm a bit sad though because there's no possible way for me to use Chestie :( He is just too big, mainly in front but really on all sides. The bezel conflicts with him anywhere I try to put him.

Show Image


And if I go to the \| key or tab, it just doesn't fit between the keys above and below. Really hope to see a slightly smaller future version of this sculpt because I really really like it.

Show Image


The Spideys are too big for 1u too, honestly. I can't put them next to any other artisan, and even next to standard profile they scratch against them when actuated. However, I think they work awesomely as a 1.25u key. So I am really loving and enjoying them for my Windows and Function keys :D

Show Image


Show Image


(And yeah my keys are in weird spots, mainly to be able to share muscle memory between Windows and macOS)

One last thing worth mentioning is that one of mine had a bubble. Not really a problem for me, because it's on the back. So I don't mind.

Show Image


I'm super sorry if this post seems overly negative, I'm not trying to be, I do love your work. Just want to give you constructive photos to help you improve your caps!

Still very glad I joined, thank you :)

No problem, feedback is appreciated!  We knew Chestie was big and posted about him not fitting with a high profile case, but didn't have a problem running into caps on the sides like you have :(  Really sorry he didn't work.

Rest assured, future caps will be better prototyped and tested.  Might send some Chestie v2's out to Chestie fans from this sale, get some feedback about design changes and whether he'll fit on all boards.

And that Spidey is the $5 B-stock, we lowered our standards and let the least-horrible of them go for the first sale because we had so many from learning how to do this.
JunkDrawer KeyCaps - Blank Experimentalist

Offline TelFiRE

  • Posts: 185
  • Location: Littleton, CO
Re: JunkDrawer KeyCaps - Sale Over (shipping!)
« Reply #66 on: Tue, 02 May 2017, 03:50:28 »
Oh, I didn't even realize that! I didn't remember everything I ordered, so sorry. For b stock it is AMAZING! Feel bad for bringing that one up now!

Maybe I'll be building a low profile that chestie can go on :D
« Last Edit: Tue, 02 May 2017, 03:55:29 by TelFiRE »
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Sale Over (all shipped)
« Reply #67 on: Wed, 03 May 2017, 01:00:06 »
Oh, I didn't even realize that! I didn't remember everything I ordered, so sorry. For b stock it is AMAZING! Feel bad for bringing that one up now!

Maybe I'll be building a low profile that chestie can go on :D


Don't feel bad! We appreciate the in-depthness of it, it helps us learn what to do better. We can't improve if we don't know how everyone is feeling and what the problems are :)

I know my husband already wrote, but I'm really sad with the Chestie issue... I'm hoping I can use this, though, to try and get more testing possibilities, maybe in the next sale have a check or something for who had issues with Chestie and send them a v2 to try? I ultimately want to make sure everyone is able to use my keys - and I can't do that with my current 4 test subjects.

Seriously, corsair is apparently silly with its spacing. Here's what a Chestie looks like on mine:
167546-0


The caps I won from the giveaway and raffle came in today! Thanks again for an awesome raffle and letting me pick the colors for the giveaway cap, I finally have a cap to replace the fn key!  ;D

Show Image


Ahhhh! I love him with your keyboard! :D
I couldn't have asked for a more pleasant giveaway participant - and I'm very happy that you liked them :)
« Last Edit: Wed, 03 May 2017, 01:04:21 by Midnight2shayla »
Sculpt Happy

Offline TelFiRE

  • Posts: 185
  • Location: Littleton, CO
Re: JunkDrawer KeyCaps - Sale Over (all shipped)
« Reply #68 on: Wed, 03 May 2017, 01:38:22 »
Really looking forward to the future versions of Chestie :D

I currently have a Ducky One TKL for reference.
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline Kick

  • Posts: 41
  • Fuego
Re: JunkDrawer KeyCaps - Sale Over (all shipped)
« Reply #69 on: Wed, 03 May 2017, 07:05:13 »
Got mine today, I forgot what I even ordered haha. Surprised I got two, a B stock and a normal yeti, but I should have known as that was on the invoice.

I'll post some more detailed pics about the A-stock yeti when I have time since it's on my board at the moment and my thoughts when comparing it to the B-stock as well as the Keyforge Saber and Fugu that's next to it.

With that said, I love the color, it's so unique and rich. The pic I have used flash as I couldn't get a good pic with natural lighting, but very happy with how they turned out.
[ Specified attachment is not available ]
Thanks and I hope the new mold will fix the issue that I will mention in the future. Well might as well try my best to describe it. Basically the cap's base isnt tall enough for my keyboard. There's a slight gap between the frame of my keyboard and where the keycap begins(F1 row). Usually keys are deep and flush with the frame(the keyboard it's on isn't a low profile one), the A-stock one has a slight gap, the B-stock one, in this regard, is slightly better. The B-stock covers the switch while on the A-stock, I can see the base of my cherry switch. Either way, I am happy to have received the first iteration of the Yeti and the color they possess and no, I do not regret my purchase at all :) I'd still purchase them knowing that it wouldn't sit fully flush with my keyboard. . Will definitely hope I win a future raffle from you, but I also want others to have a chance. Maybe I'll just win it all...*insert evil laugh here

« Last Edit: Wed, 03 May 2017, 07:11:32 by Kick »

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Sale Over (all shipped)
« Reply #70 on: Thu, 04 May 2017, 17:48:06 »
Really looking forward to the future versions of Chestie :D

I currently have a Ducky One TKL for reference.

Okay, I will probably reach out to you when the next iteration comes out and have you be our ducky expert, then, if you don't mind :)

Got mine today, I forgot what I even ordered haha. Surprised I got two, a B stock and a normal yeti, but I should have known as that was on the invoice.

I'll post some more detailed pics about the A-stock yeti when I have time since it's on my board at the moment and my thoughts when comparing it to the B-stock as well as the Keyforge Saber and Fugu that's next to it.

With that said, I love the color, it's so unique and rich. The pic I have used flash as I couldn't get a good pic with natural lighting, but very happy with how they turned out.
(Attachment Link)
Thanks and I hope the new mold will fix the issue that I will mention in the future. Well might as well try my best to describe it. Basically the cap's base isnt tall enough for my keyboard. There's a slight gap between the frame of my keyboard and where the keycap begins(F1 row). Usually keys are deep and flush with the frame(the keyboard it's on isn't a low profile one), the A-stock one has a slight gap, the B-stock one, in this regard, is slightly better. The B-stock covers the switch while on the A-stock, I can see the base of my cherry switch. Either way, I am happy to have received the first iteration of the Yeti and the color they possess and no, I do not regret my purchase at all :) I'd still purchase them knowing that it wouldn't sit fully flush with my keyboard. . Will definitely hope I win a future raffle from you, but I also want others to have a chance. Maybe I'll just win it all...*insert evil laugh here



Hi! I'm glad that you like them, first off, and I really appreciate the post, pictures, and feedback. Would you mind sending me a message with a picture of the gap? I can't say that I've seen that before, so I want to make sure I know what I need to do to fix it - especially since I'm making the new-and-improved yeti mold either tonight or tomorrow.

Thanks so much!
Sculpt Happy

Offline TelFiRE

  • Posts: 185
  • Location: Littleton, CO
Re: JunkDrawer KeyCaps - Sale Over (all shipped)
« Reply #71 on: Thu, 04 May 2017, 18:33:52 »
Really looking forward to the future versions of Chestie :D

I currently have a Ducky One TKL for reference.

Okay, I will probably reach out to you when the next iteration comes out and have you be our ducky expert, then, if you don't mind :)

I would really love to be a tester for the new Chestie :) I cannot however guarantee I'll still have my Ducky. I have several customs on the way and once I build them, I'll probably clear out the old ones. I will however, always have a keyboard with very tight spacing and a bezel.

I also currently have in my possession a Razer 2013 BlackWidow, Ducky Shine 4, Shine 3, and a Zowie Celeritas. The story is the same on all of them, so I imagine it would be true across most bezel keyboards. There's very little clearance around the outside of each cap. To give you an idea, the thickness of the base cap on Spidey is about how much room there is between each key, and the bezels. A tiny bit more than that.

If there's anything I can do to be helpful just let me know :)
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum

Offline reaper

  • ** Moderator Emeritus
  • Posts: 2940
Re: JunkDrawer KeyCaps - Sale Over (all shipped)
« Reply #72 on: Thu, 04 May 2017, 19:51:57 »
Got these yesterday and chocolates are all gone!  :)


Att fly är livet, att dröja, döden.
Din Eli

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Sale Over (all shipped)
« Reply #73 on: Sun, 07 May 2017, 03:40:33 »
Really looking forward to the future versions of Chestie :D

I currently have a Ducky One TKL for reference.

Okay, I will probably reach out to you when the next iteration comes out and have you be our ducky expert, then, if you don't mind :)

I would really love to be a tester for the new Chestie :) I cannot however guarantee I'll still have my Ducky. I have several customs on the way and once I build them, I'll probably clear out the old ones. I will however, always have a keyboard with very tight spacing and a bezel.

I also currently have in my possession a Razer 2013 BlackWidow, Ducky Shine 4, Shine 3, and a Zowie Celeritas. The story is the same on all of them, so I imagine it would be true across most bezel keyboards. There's very little clearance around the outside of each cap. To give you an idea, the thickness of the base cap on Spidey is about how much room there is between each key, and the bezels. A tiny bit more than that.

If there's anything I can do to be helpful just let me know :)

Hey, the more keyboards for testing the better! :D
My husband and I were very confused about the blackwidow not fitting, as he has the same and he fits, but then we realized that he nodded it right after he got it - namely the top plate, because he didn't like the plastic. *sigh*


Got these yesterday and chocolates are all gone!  :)


Show Image


:D glad you liked them, not gonna lie, definitely bought myself some chocolate at the same time as the chocolate for the purchases!

Sculpt Happy

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Rummaging (working on new stuff)
« Reply #74 on: Sun, 07 May 2017, 03:45:05 »
Thought I would offer a sneak-peek at his progress for any interested in Stanley..!

https://geekhack.org/index.php?topic=87591.msg2360529#msg2360529
Sculpt Happy

Offline PastelSkies

  • Posts: 1
Re: JunkDrawer KeyCaps - Rummaging (working on new stuff)
« Reply #75 on: Mon, 08 May 2017, 16:30:20 »
Just got my order in. I got one spidey and 1 yeti. The sculpting is amazing, I know that 1 is b-stock but im not sure which because they both look great! However, i don't know if it is my keyboard or the caps, but they fit kinda loose (the spidey in particular) but other than that, great work. Can't wait to see what you put out next!!                                               

168029-0168031-1
« Last Edit: Mon, 08 May 2017, 16:43:08 by PastelSkies »

Offline skystryke

  • Posts: 0
  • Location: Ontario, Canada
Re: JunkDrawer KeyCaps - Rummaging (working on new stuff)
« Reply #76 on: Wed, 10 May 2017, 13:22:56 »
Just got mine in the mail. Super happy with the look and color but unfortunately I can't find a place for Chestie on my current board due to his size. I am hopeful that I can find a spot for him on my mechmini once that comes and is built at least. Regardless of that issue I love all three and can't wait to see what you come out with next!

Edit: Forgot Pictures
« Last Edit: Wed, 10 May 2017, 13:25:19 by skystryke »

Offline nastrovje

  • Posts: 115
Re: JunkDrawer KeyCaps - Rummaging (working on new stuff)
« Reply #77 on: Thu, 11 May 2017, 11:04:53 »
Finally the packages have landed in Europe aswell.  :cool:

Thank you for the great caps!

I got an A-Stock and a B-Stock Yeti in the colourways I wished for, awesome!

I am sorry but I don't have any good camera on hand, so my crappy phone camera will have to do it. :))



I also remember you liked feedback so here we go:

I can't find much negative tbh. There is only one thing I really want to see improved in the next revisions - the profile of the cap itself.
The base could be 1-2mm smaller so there is no possibility of sctraching the keyboard case at all.
It is definitely not tragic tough, as I don't use the keys on which my artisans sit on anyways  :))


The positive:

The cap fits well ontop of the switch, maybe a tiny bit loose, but nothing I haven't seen in other caps.

The colours are really nice. They are intense and well made, just how I like it.

The multiple shots are made very well. Clean lines. Good stuff.

The sculpt itself looks even better in real life.


In the end, I think this was a great debut and I really like your stuff. I definitely embosomed the Yeti.

I hope you continue to produce artisans and you can be sure to have my entries in the upcoming raffles.


e: And thanks of course for all the american candy, that was really well liked and all eaten within the first hour after opening the package  :))
« Last Edit: Thu, 11 May 2017, 13:34:14 by nastrovje »

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Rummaging (working on new stuff)
« Reply #78 on: Thu, 11 May 2017, 22:55:42 »
Just got my order in. I got one spidey and 1 yeti. The sculpting is amazing, I know that 1 is b-stock but im not sure which because they both look great! However, i don't know if it is my keyboard or the caps, but they fit kinda loose (the spidey in particular) but other than that, great work. Can't wait to see what you put out next!!                                               

(Attachment Link) (Attachment Link)

I'm sorry that they are kind of loose, but I'm very glad that you like them and am very flattered by your happiness with my sculpt - it means a lot to me :).
I'm trying to work on the tightness of the stems, but I'm having trouble with replicating the stems in resin from the keycaps that they are sculpted on. One helpful thing that I've been told is that electrical tape can be used to make them more stuck on the keyboard (a very small amount).
I linked our making stuff together thread and instagram (although it's pretty bare right now), otherwise I'll try and keep this updated somewhat as well until our next sale :)

Finally the packages have landed in Europe aswell.  :cool:

Thank you for the great caps!

I got an A-Stock and a B-Stock Yeti in the colourways I wished for, awesome!

I am sorry but I don't have any good camera on hand, so my crappy phone camera will have to do it. :))

Show Image


I also remember you liked feedback so here we go:

I can't find much negative tbh. There is only one thing I really want to see improved in the next revisions - the profile of the cap itself.
The base could be 1-2mm smaller so there is no possibility of sctraching the keyboard case at all.
It is definitely not tragic tough, as I don't use the keys on which my artisans sit on anyways  :))


The positive:

The cap fits well ontop of the switch, maybe a tiny bit loose, but nothing I haven't seen in other caps.

The colours are really nice. They are intense and well made, just how I like it.

The multiple shots are made very well. Clean lines. Good stuff.

The sculpt itself looks even better in real life.


In the end, I think this was a great debut and I really like your stuff. I definitely embosomed the Yeti.

I hope you continue to produce artisans and you can be sure to have my entries in the upcoming raffles.


e: And thanks of course for all the american candy, that was really well liked and all eaten within the first hour after opening the package  :))

Thank you so much for your kind words - I feel very lucky to have such a sweet group that was in the first raffle and am very touched by the support. It's good to hear that the caps have landed internationally, too! Not gonna lie, that Yeti pictured was one of my favorites, as well.
We are currently making stock for another sale, but it might be a month or so. We are planning on doing more Yetis as well as Stanley and a couple other projects (probably 4 choices total in the end). I don't think I could stop this hobby if I wanted, we both really, really enjoy it and it's become a part of our daily routine (whenever possible, that is).

Actually, very few of the caps in this sale are actually true double-shot - most were painted inside of the silicone and then cast, so the color will not come off but they are actually painted rather than multiple-cast. We will be doing more of this and the true double shot in the next sale!
« Last Edit: Thu, 11 May 2017, 23:45:46 by Midnight2shayla »
Sculpt Happy

Offline Wylte

  • Posts: 16
  • Location: US-WA
Re: JunkDrawer KeyCaps - Rummaging Intensifies - GIVEAWAY SURVEY LIVE
« Reply #79 on: Thu, 08 June 2017, 22:12:21 »
Shameless survey bump  :cool:
JunkDrawer KeyCaps - Blank Experimentalist

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1163
  • Location: Indiana, USA
Re: JunkDrawer KeyCaps - Rummaging Intensifies - GIVEAWAY SURVEY LIVE
« Reply #80 on: Thu, 08 June 2017, 22:40:02 »
Hey the Atmos? Colorway doesn't have a vote button.
keyboards.

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Rummaging Intensifies - GIVEAWAY SURVEY LIVE
« Reply #81 on: Thu, 08 June 2017, 23:21:54 »
Hey the Atmos? Colorway doesn't have a vote button.

Hi! The yes or no on the glow styles should be right below the non-glow picture and right above the glow picture. :D
« Last Edit: Mon, 26 June 2017, 23:46:52 by Midnight2shayla »
Sculpt Happy

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Anniversary Sale 06/29/17!
« Reply #82 on: Thu, 29 June 2017, 17:27:24 »
Good luck, everyone! Let me know if you need anything or have any questions!
Sculpt Happy

Offline nya

  • Posts: 31
Re: JunkDrawer KeyCaps - Anniversary Sale 06/29/17!
« Reply #83 on: Thu, 29 June 2017, 18:36:38 »
Good luck, everyone! Let me know if you need anything or have any questions!
I'm not the best person for relationship advice. I believe it's ok to disagree, but my significant other doesn't. I lose no matter what. 🙀

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Anniversary Sale 06/29/17!
« Reply #84 on: Fri, 30 June 2017, 00:37:48 »
Good luck, everyone! Let me know if you need anything or have any questions!
I'm not the best person for relationship advice. I believe it's ok to disagree, but my significant other doesn't. I lose no matter what. 🙀

I'm sorry :( if it's any consolation, you don't lose because you have your priorities straight when they don't. You win at that - and most people don't actually figure out their priorities  until way too late.
Good luck, and ill try and take the "agree to disagree" advice to heart <3
Sculpt Happy

Offline nya

  • Posts: 31
Re: JunkDrawer KeyCaps - Anniversary Sale 06/29/17!
« Reply #85 on: Fri, 30 June 2017, 02:17:43 »
Good luck, everyone! Let me know if you need anything or have any questions!
I'm not the best person for relationship advice. I believe it's ok to disagree, but my significant other doesn't. I lose no matter what. 🙀

I'm sorry :( if it's any consolation, you don't lose because you have your priorities straight when they don't. You win at that - and most people don't actually figure out their priorities  until way too late.
Good luck, and ill try and take the "agree to disagree" advice to heart <3




Haha How come it ended up with you consoling me? You're too sweet!
[/size]I hope that you'll be one of those cute lil ole couples one day!

Offline Hazzula

  • Posts: 56
  • Location: Cebu, Philippines
Re: JunkDrawer KeyCaps - INVOICES 50% done - check updates for information!
« Reply #86 on: Sun, 02 July 2017, 03:40:31 »
Eep! My very first invoice!

Sent from my SM-N9005 using Tapatalk


Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - INVOICES 50% done - check updates for information!
« Reply #87 on: Sun, 02 July 2017, 23:00:16 »
Eep! My very first invoice!

Sent from my SM-N9005 using Tapatalk

Thank you for letting us be the first artisan you get - I'm very flattered :D I hope you love your cap!
Sculpt Happy

Offline nya

  • Posts: 31
Re: JunkDrawer KeyCaps - INVOICING complete!
« Reply #88 on: Mon, 03 July 2017, 22:22:36 »
Purple!! The best keycap colour ever! Thank you guys!!
« Last Edit: Fri, 07 July 2017, 09:19:51 by nya »

Offline skystryke

  • Posts: 0
  • Location: Ontario, Canada
Re: JunkDrawer KeyCaps - 100% shipped, back to rummaging!
« Reply #89 on: Tue, 25 July 2017, 15:26:41 »
Just got my order and absolutely love the packaging you guys did! All three of the caps I ordered look great and I got a Beta Boxter that I absolutely love as an additional surprise!

Offline Wylte

  • Posts: 16
  • Location: US-WA
Re: JunkDrawer KeyCaps - 100% shipped, back to rummaging!
« Reply #90 on: Sat, 29 July 2017, 14:59:31 »
Hooray for Boxter getting some love!

The cards and packaging took a surprisingly long time to get right, glad the result is appreciated!  :thumb:
As always we're learning from our experiences and it'll hopefully be even better next time (not to mention smoother and faster on our end xD )
JunkDrawer KeyCaps - Blank Experimentalist

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - preparing for upcoming Cirque!
« Reply #91 on: Sun, 01 October 2017, 22:45:00 »
Some Chestie Spam!
179382-0
179384-1
179386-2
179388-3
Sculpt Happy

Offline superpiya

  • Posts: 39
Re: JunkDrawer KeyCaps - prepping Cirque and re-distributing Chesties!
« Reply #92 on: Mon, 02 October 2017, 07:23:10 »
New Chestie, looking good! I see you removed the middle patch.
Looks timid compared with his older brother  :D

Offline KeLorean

  • Posts: 157
  • Location: Space Coast, FL
Re: JunkDrawer KeyCaps - prepping Cirque and re-distributing Chesties!
« Reply #93 on: Mon, 02 October 2017, 10:59:49 »
this is my first time seeing these.  i like your GID colorways.  really fun sculpts and cool style going here.  i sure hope i win one :cool:
Click it OR Ticket!

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - prepping Cirque and re-distributing Chesties!
« Reply #94 on: Mon, 02 October 2017, 12:42:40 »
New Chestie, looking good! I see you removed the middle patch.
Looks timid compared with his older brother  :D

xD I actually told my husband that it looked like this Chestie is more "please love me!" where Chestie v1 didn't give a crap about anyone's opinion of him - glad others see it, too, haha. I tried an edition of v2 having a band, but on the smaller body his eyes got sacrificed too much for me :/

this is my first time seeing these.  i like your GID colorways.  really fun sculpts and cool style going here.  i sure hope i win one :cool:

Hi! Nice to meet you :D thank you for your kind words, they really mean a lot to me! And good luck in the sale :) the first round have purple or green bases, but we are planning on also doing pink, red, blue, orange, and yellow bases over the next couple months in small quantities - so hopefully between all of the colors everyone will get a good shot :D
Sculpt Happy

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Cirque: Majora & Curios and Giveaway LIVE!
« Reply #95 on: Mon, 09 October 2017, 19:07:32 »
Good luck everyone! I'm looking forward to your stories, and let me know (or PM me, or Wylte) if you have any questions!
Sculpt Happy

Offline Midnight2shayla

  • Thread Starter
  • Posts: 36
  • JunkDrawer KeyCaps
Re: JunkDrawer KeyCaps - Cirque: Majora & Curios and Giveaway LIVE!
« Reply #96 on: Tue, 10 October 2017, 13:29:06 »
Holy mother of Chestie love - I received a PM with a good question this morning and I wanted to specify clearly that the Chestie entry is separate from the 3 caps you can buy total, since he is a special occasion and there are 3 other colorways. If you would like to edit your form, let me know!
Sculpt Happy

Offline superpiya

  • Posts: 39
Re: JunkDrawer KeyCaps - Cirque: Majora & Curios and Giveaway LIVE!
« Reply #97 on: Wed, 11 October 2017, 03:14:50 »
GL to all! Please RNG!

Offline superpiya

  • Posts: 39
Re: JunkDrawer KeyCaps - Cirque: INVOICED! Check your emails :)
« Reply #98 on: Thu, 12 October 2017, 02:10:44 »
Invoice paid! Can't wait to see them in person :D

Offline TelFiRE

  • Posts: 185
  • Location: Littleton, CO
Re: JunkDrawer KeyCaps - Cirque: INVOICED! Check your emails :)
« Reply #99 on: Thu, 12 October 2017, 05:58:26 »
Can't believe I lucked out when I was so specific with what I wanted haha. Thank you thank you!
KBD75 GMK Terminal          XD84 DSA Black on GSF + Hana Matcha + Serum